Search Results

Search found 12598 results on 504 pages for 'beta testing'.

Page 444/504 | < Previous Page | 440 441 442 443 444 445 446 447 448 449 450 451  | Next Page >

• Stepping through ASP.NET MVC in Action (2009) - and stuck on nunit issue

  - by Jen

  I seem to have missed something - in this step through it talks through downloading nunit and changing the original MSTest reference to NUnit. Which seems fine until it talks about running the test with UnitRun from JetBrains. I would have thought I could run nUnit to be able to run the test - but I load my project in the nUnit gui and I get "This assembly was not built with any known testing framework". This after running the Nunit-2.5.3.9346.msi. Or am I supposed to be able to run tests from within visual studio 2008? After some research I find this: http://www.jetbrains.com/unitrun/ (ie. it seems to be saying this is no longer supported and I'm thinking JetBrains Resharper may cost money?). I'm a little rusty on my NUnit experience. So how do I go ahead and run my test? Is the error message I'm getting considered abnormal? I've added a reference in my MvcApplication.Tests project to the nunit.framework. Is this the wrong reference to add? Thanks :)

  Read the article

• iPhone: Which are the most useful techniques for faster Bluetooth?

  - by Mike Howard

  Hi. I'm adding peer-to-peer bluetooth using GameKit to an iPhone shoot-em-up, so speed is vital. I'm sending about 40 messages a second each way, most of them with the faster GKSendDataUnreliable, all serializing with NSCoding. In testing between a 3G and 3GS, this is slowing the 3G down a lot more than I'd like. I'm wondering where I should concentrate my efforts to speed it up. How much slower is GKSendDataReliable? For the few packets that have to get there, would it be faster to send a GKSendDataUnreliable and have the peer send an acknowledgement so I can send again if I don't get the Ack within, say, 100ms? How much faster would it be to create the NSData instance using a regular C array rather than archiving with the NSCoding protocol? Is this serialization process (for about a dozen floats) just as slow as you'd expect from an object creation/deallocation overhead, or is something particularly slow happening? I heard that (for example) sending four seperate sets of data is much, much slower, than sending one piece of data four times the size. Would I make a significant saving by sending separate packets of data that wouldn't always go together in the same packet when they happen at the same time? Are there any other bluetooth performance secrets I've missed? Thanks for your help.

  Read the article

• Receiving "expected expression before" Error When Using A Struct

  - by Zach Dziura

  I'm in the process of creating a simple 2D game engine in C with a group of friends at school. I'd like to write this engine in an Object-Oriented way, using structs as classes, function pointers as methods, etc. To emulate standard OOP syntax, I created a create() function which allocates space in memory for the object. I'm in the process of testing it out, and I'm receiving an error. Here is my code for two files that I'm using to test: test.c: #include <stdio.h> int main() { typedef struct { int i; } Class; Class *test = (Class*) create(Class); test->i = 1; printf("The value of \"test\" is: %i\n", test->i); return 0; } utils.c: #include <stdio.h> #include <stdlib.h> #include "utils.h" void* create(const void* class) { void *obj = (void*) malloc(sizeof(class)); if (obj == 0) { printf("Error allocating memory.\n"); return (int*) -1; } else { return obj; } } void destroy(void* object) { free(object); } The utils.h file simply holds prototypes for the create() and destroy() functions. When I execute gcc test.c utils.c -o test, I'm receiving this error message: test.c: In function 'main': test.c:10:32: error: expected expression before 'Class' I know it has something to do with my typedef at the beginning, and how I'm probably not using proper syntax. But I have no idea what that proper syntax is. Can anyone help?

  Read the article

• I want to build a Google-friendly web app, where should I start?

  - by ronii

  I have only very basic experience with HTML/CSS and have quite a bit of experience with testing software and web apps from a consumer perspective. I'd love to launch a web application that plays nicely with Google services, similar to some of the apps you'd find on the Google Apps Marketplace, such as ManyMoon, time to note, Socialwok, etc. I'm a huge Google fan and would like to build something that's well integrated with other Google services. If you were a total beginner and wanted to build a complex app like one of examples above (project management, CRM, etc), where would you start? If you worked your ass off 18 hours a day, 24/7, how fast could you do it? I've dabbled into various languages and development frameworks, and read about which apps are using what languages but it's hard to figure out what would be most beneficial to jump into. Ruby on Rails, PHP, Google Web Toolkit, AppEngine. The list goes on and on. I want to be able to build and launch my own scalable web app. Thanks.

  Read the article

• Objective-C Definedness

  - by Dan Ray

  This is an agonizingly rookie question, but here I am learning a new language and framework, and I'm trying to answer the question "What is Truth?" as pertains to Obj-C. I'm trying to lazy-load images across the network. I have a data class called Event that has properties including: @property (nonatomic, retain) UIImage image; @property (nonatomic, retain) UIImage thumbnail; in my AppDelegate, I fetch up a bunch of data about my events (this is an app that shows local arts event listings), and pre-sets each event.image to my default "no-image.png". Then in the UITableViewController where I view these things, I do: if (thisEvent.image == NULL) { NSLog(@"Going for this item's image"); UIImage *tempImage = [UIImage imageWithData:[NSData dataWithContentsOfURL: [NSURL URLWithString: [NSString stringWithFormat: @"http://www.mysite.com/content_elements/%@_image_1.jpg", thisEvent.guid]]]]; thisEvent.image = tempImage; } We never get that NSLog call. Testing thisEvent.image for NULLness isn't the thing. I've tried == nil as well, but that also doesn't work.

  Read the article

• JSON onFailure issue

  - by Mikey1980

  I’m having trouble getting a AJAX/JSON function to work correctly. I had this function grabbing value from a drop down box but now I want to use an anchor tag to set it's value. I thought it would be easy to just use the onClick event to pass string to the function I was using for the drop down box but I get the alert in JSON onFailure event even though data gets added to MySQL. I tried removing the alert from onFailure event but then it doesn't add the data. The drop down still continues work work fine, no alerts. (I should note that removing the alert also broke my drop down box) 1st I add an onClick event… <a href="<?php echo Settings::get('app.webroot'); ?>?view=schedule&action=questions" onmouseout="MM_swapImgRestore();" onmouseover="MM_swapImage('bre','','template/images/schedule/bre_f2.gif',1)" onclick="assignCallType('testing')";> 2nd I check main.js.php function assignCallType(type) { alert(type); new Request.JSON({ url: "ajax.php", onSuccess: function(rtndata,txt){ if (rtndata['STATUS'] != 'OK') alert('Status was not okay'); }, onFailure : function () { alert("onFailure") } }).get({ 'action': 'assignCallType', 'call_type': type }); } 3rd Ajax.php: the variable is back in PHP and values get added to MySQL but I get the Alert in the JSON onFailure event if ($_GET['action'] == "assignCallType") { if ($USER->isInsideSales()) { $call_type = $_GET['call_type']; $_SESSION['callinfo']->setCallType($call_type); $_SESSION['callinfo']->save($callid); echo json_encode(array('STATUS'=>'OK')); } else { echo json_encode(array('STATUS'=>'DENIED')); } } Any idea where I am going wrong. The only difference between this and the working drop down is how the function was called, I used onchange="assignCallType(this.value)".

  Read the article

• Using "margin: 0 auto;" in Internet Explorer 8

  - by stusmith

  I'm in the process of doing some advance IE8 testing, and it seems that the old technique of using "margin: 0 auto;" doesn't work in all cases in IE8. The following piece of HTML gives a centered button in FF3, Opera, Safari, Chrome, IE7, and IE8 compat, but NOT in IE8 standard: <div style="height: 500px; width: 500px; background-color: Yellow;"> <input type="submit" style="display: block; margin: 0 auto;" /> </div> (As a work-around I can add an explicit width to the button). So the question is: which browsers are correct? Or is this one of those cases where the behaviour is undefined? (My thinking is that all the browsers are incorrect - shouldn't the button be 100% width if it's "display: block"?) UPDATE: I'm being a dunce. Since input isn't a block-level element, I should have just contained it within a div with "text-align: center". Having said that, for curiosity's sake, I'd still like to know whether the button should or shouldn't be centered in the example above. FOR THE BOUNTY: I know I'm doing odd things in the example, and as I point out in the update, I should have just aligned it center. For the bounty, I'd like references to the specs that answer: If I set "display: block", should the button be width 100%? Or is this undefined? Since the display is block, should "margin: 0 auto;" center the button, or not, or undefined?

  Read the article

• Recreating http request with cURL incl. files

  - by Toby

  I consistently get the error 'failed creating formpost data' from the below code, the same thing works perfectly on my local testing server, but on my shared host it throws the error. The sample part is just to simulate building the array with both files and non-file data. Essentially all I'm trying to do here is redirect the same http request to another server, but I'm running into so many troubles. $count=count($_FILES['photographs']['tmp_name']); $file_posts=array('samplesample' => 'ladeda'); for($i=0;$i<$count;$i++) { if(!empty($_FILES['photographs']['name'][$i])) { $fn = genRandomString(); $file_posts[$fn] = "@".$_FILES['photographs']['tmp_name'][$i]; } } $ch = curl_init(); curl_setopt($ch,CURLOPT_URL,"http://myurl/wp-content/plugins/autol/rec.php"); curl_setopt($ch,CURLOPT_USERAGENT, "Mozilla/4.0 (compatible; MSIE 5.01; Windows NT 5.0)"); curl_setopt($ch,CURLOPT_HEADER,TRUE); curl_setopt($ch,CURLOPT_POST,TRUE); curl_setopt($ch,CURLOPT_POSTFIELDS,$file_posts); curl_exec($ch); print curl_error($ch); curl_close($ch);

  Read the article

• Browser timing out attempting to load images

  - by notJim

  I've got a page on a webapp that has about 13 images that are generated by my application, which is written in the Kohana PHP framework. The images are actually graphs. They are cached so they are only generated once, but the first time the user visits the page, and the images all have to be generated, about half of the images don't load in the browser. Once the page has been requested once and images are cached, they all load successfully. Doing some ad-hoc testing, if I load an individual image in the browser, it takes from 450-700 ms to load with an empty cache (I checked this using Google Chrome's resource tracking feature). For reference, it takes around 90-150 ms to load a cached image. Even if the image cache is empty, I have the data and some of the application's startup tasks cached, so that after the first request, none of that data needs to be fetched. My questions are: Why are the images failing to load? It seems like the browser just decides not to download the image after a certain point, rather than waiting for them all to finish loading. What can I do to get them to load the first time, with an empty cache? Obviously one option is to decrease the load times, and I could figure out how to do that by profiling the app, but are there other options? As I mentioned, the app is in the Kohana PHP framework, and it's running on Apache. As an aside, I've solved this problem for now by fetching the page as soon as the data is available (it comes from a batch process), so that the images are always cached by the time the user sees them. That feels like a kludgey solution to me, though, and I'm curious about what's actually going on.

  Read the article

• Tracking a fragment of a file in two places with git

  - by mabraham

  Hi, I have code such as void myfunc() { introduction(); while(condition()) { complex(); loop(); interior(); code(); } cleanup(); } which I wish to duplicate into two versions, viz: void myfuncA() { introduction(); minorchangeA(); while(condition()) { complex(); loop(); interior(); code(); } cleanup(); } void myfuncB() { introduction(); minorchangeB(); while(condition()) { complex(); modifiedB(); loop(); interior(); code(); } cleanup(); extracleanupB(); } git claims to track content rather than files, so do I need to tell it that there are chunks here that are common to both myfuncA and myfuncB so that when merging with upstream changes to myfunc that those changes should propagate to both myfuncA and myfuncB? If so, how? The code could be written so that myfuncAB did the correct thing at each point by testing for condition A or B, but that could seriously hinder readability or performance.

  Read the article

• ARC and __unsafe_unretained

  - by J Shapiro

  I think I have a pretty good understanding of ARC and the proper use cases for selecting an appropriate lifetime qualifiers (__strong, __weak, __unsafe_unretained, and __autoreleasing). However, in my testing, I've found one example that doesn't make sense to me. As I understand it, both __weak and __unsafe_unretained do not add a retain count. Therefore, if there are no other __strong pointers to the object, it is instantly deallocated. The only difference in this process is that __weak pointers are set to nil, and __unsafe_unretained pointers are left alone. If I create a __weak pointer to a simple, custom object (composed of one NSString property), I see the expected (null) value when trying to access a property: Test * __weak myTest = [[Test alloc] init]; myTest.myVal = @"Hi!"; NSLog(@"Value: %@", myTest.myVal); // Prints Value: (null) Similarly, I would expect the __unsafe_unretained lifetime qualifier to cause a crash, due to the resulting dangling pointer. However, it doesn't. In this next test, I see the actual value: Test * __unsafe_unretained myTest = [[Test alloc] init]; myTest.myVal = @"Hi!"; NSLog(@"Value: %@", myTest.myVal); // Prints Value: Hi! Why doesn't the __unsafe_unretained object become deallocated?

  Read the article

• How can I parse_url in PHP when there is a URL in a string variable?

  - by Eric O

  I am admittedly a PHP newbie, so I need some help. I am creating a self-designed affiliate program for my site and have the option for an affiliate to add a SubID to their link for tracking. Without having control over what is entered, I have been testing different scenarios and found a bug when a full URL is entered (i.e. "http://example.com"). In my PHP I can grab the variable from the string no problem. My problem comes from when I get the referring URL and parse it (since I need to parse the referring URL to get the host mane for other uses). Code below: $refURL = getenv("HTTP_REFERER"); $parseRefURL = parse_url($refURL); WORKS when incoming link is (for example): http://example.com/?ref=REFERRER'S-ID&sid=www.test.com ERROR when incoming link is (notice the addition of "http://" after "sid="): http://example.com/?ref=REFERRER'S-ID&sid=http://www.test.com Here is the warning message: Warning: parse_url(/?ref=REFERRER'S-ID&sid=http://www.test.com) [function.parse-url]: Unable to parse url in /home4/'directory'/public_html/hosterdoodle/header.php on line 28 Any ideas on how to keep the parse-url function from being thrown off when someone may decide to place a URL in a variable? (I actually tested this problem down to the point that it will throw the error with as little as ":/" in the variable)

  Read the article

• help configuring a mail server for use with mail.jar and activation.jar

  - by bobbyblue

  im trying to work with the below code: import javax.servlet.*; import javax.servlet.http.*; import java.io.*; import javax.mail.*; import javax.mail.internet.*; // important import javax.mail.event.*; // important import java.net.*; import java.util.*; public class servletmail extends HttpServlet { public void doPost(HttpServletRequest request,HttpServletResponse response) throws ServletException, IOException { PrintWriter out=response.getWriter(); response.setContentType("text/html"); try { Properties props=new Properties(); props.put("mail.smtp.host","localhost"); // 'localhost' for testing Session session1 = Session.getDefaultInstance(props,null); String s1 = request.getParameter("text1"); //sender (from) String s2 = request.getParameter("text2"); String s3 = request.getParameter("text3"); String s4 = request.getParameter("area1"); Message message =new MimeMessage(session1); message.setFrom(new InternetAddress(s1)); message.setRecipients (Message.RecipientType.TO,InternetAddress.parse(s2,false)); message.setSubject(s3); message.setText(s4); Transport.send(message); out.println("mail has been sent"); } catch(Exception ex) { System.out.println("ERROR....."+ex); } } } im using mail.jar and activation.jar but i cant understand how shouls i configure it with a mail server which mail server should i use will i be able to send an email using above what are the requirements a mail server? how should i configure it

  Read the article

• OnEditorActionListener called twice with same eventTime on SenseUI keyboard

  - by ydant

  On just one phone I am testing on (HTC Incredible, Android 2.2, Software 3.21.605.1), I am experiencing the following behavior. The onEditorAction event handler is being called twice (immediately) when the Enter key on the Sense UI keyboard is pressed. The KeyEvent.getEventTime() is the same for both times the event is called, leading me to this work-around: protected void onCreate(Bundle savedInstanceState) { [...] EditText text = (EditText)findViewById(R.id.txtBox); text.setOnEditorActionListener(new OnEditorActionListener() { private long lastCalled = -1; public boolean onEditorAction(TextView v, int actionId, KeyEvent event) { if ( event.getEventTime() == lastCalled ) { return false; } else { lastCalled = event.getEventTime(); handleNextButton(v); return true; } } }); [...] } The EditText is defined as: <EditText android:layout_width="150sp" android:layout_height="wrap_content" android:id="@+id/txtBox" android:imeOptions="actionNext" android:capitalize="characters" android:singleLine="true" android:inputType="textVisiblePassword|textCapCharacters|textNoSuggestions" android:autoText="false" android:editable="true" android:maxLength="6" /> On all other devices I've tested on, the action button is properly labeled "Next" and the event is only called a single time when that button is pressed. Is this a bug in Sense UI's keyboard, or am I doing something incorrectly? Thank you for any assistance.

  Read the article

• Calling base Text method on custom TextBox

  - by The Demigeek

  I'm trying to create a CurrencyTextBox that inherits from TextBox. I'm seeing some really weird behavior that I just don't understand. After lots of testing, I think I can summarize as follows: In the class code, when I access base.Text (to get the textbox's text), I'm actually getting the return value of my overridden Text property. I thought the base keyword would ensure that the underlying object's methods get called. To demonstrate: public class cTestTextBox : System.Windows.Forms.TextBox { string strText = ""; public cTestTextBox() { SetVal("AAA"); base.Text = "TEST"; } public override string Text { get { string s = strText; s = "++" + s + "++"; return s; } } public void SetVal(string val) { strText = val; } } Place this control on a form and set a breakpoint on the constructor. Run the app. Hover your mouse over the base.Text expression. Note that the tooltip shows you the value of the overridden property, not the base property. Execute the SetVal() statement and again hover your mouse over the base.Text expression. Note that the tooltop shows you the value of the overridden property, not the base property. How do I reliably access the Text property of the textbox from which I'm inheriting?

  Read the article

• "date_part('epoch', now() at time zone 'UTC')" not the same time as "now() at time zone 'UTC'" in po

  - by sirlark

  I'm writing a web based front end to a database (PHP/Postgresql) in which I need to store various dates/times. The times are meant to be always be entered on the client side in the local time, and displayed in the local time too. For storage purposes, I store all dates/times as integers (UNIX timestamps) and normalised to UTC. One particular field has a restriction that the timestamp filled in is not allowed to be in the future, so I tried this with a database constraint... CONSTRAINT not_future CHECK (timestamp-300 <= date_part('epoch', now() at time zone 'UTC')) The -300 is to give 5 minutes leeway in case of slightly desynchronised times between browser and server. The problem is, this constraint always fails when submitting the current time. I've done testing, and found the following. In PostgreSQL client: SELECT now() -- returns correct local time SELECT date_part('epoch', now()) -- returns a unix timestamp at UTC (tested by feeding the value into the date function in PHP correcting for its compensation to my time zone) SELECT date_part('epoch', now() at time zone 'UTC') -- returns a unix timestamp at two time zone offsets west, e.g. I am at GMT+2, I get a GMT-2 timestamp. I've figured out obviously that dropping the "at time zone 'UTC'" will solve my problem, but my question is if 'epoch' is meant to return a unix timestamp which AFAIK is always meant to be in UTC, why would the 'epoch' of a time already in UTC be corrected? Is this a bug, or I am I missing something about the defined/normal behaviour here.

  Read the article

• Java giving incorrect year values

  - by whistler

  Something very, very strange is occurring in my program, and I'm wondering if anyone out there has seen this occur before. And, if so, how to fix it. Basically, I am parsing an csv file...no problem there. One column contains a date and I am taking it in as a String and changing to a Date object. Again, no problem there. The code is as follows: SimpleDateFormat dateFormat = new SimpleDateFormat("MM/dd/yy hh:mm"); Date initialDate = new Date(); try { initialDate = dateFormat.parse(rows.get(0)[8]); System.out.println(initialDate); } catch (ParseException e) { // TODO Auto-generated catch block e.printStackTrace(); } Of course, I'm parsing other columns as well (and those are working fine). So, when I run my program for a small csv file (2.8 MB), the dates come out (i.e. are parsed) perfectly. However, when I run the program for a large csv file (25 MB), the dates are a hot mess. For example, take a look at the year values I am getting (the following is just a tiny portion of the println output from the code above): 1000264 at Sun Nov 05 15:30:00 EST 2186 1000320 at Sat Mar 04 17:30:00 EST 2169 1000347 at Sat Apr 01 09:45:00 EDT 2169 1000413 at Tue Jul 09 13:00:00 EDT 2182 1000638 at Fri Dec 11 13:45:00 EST 2167 1000667 at Wed Dec 10 10:00:00 EST 2188 1000690 at Mon Jan 02 13:00:00 EST 2169 1000843 at Thu Feb 11 13:30:00 EST 2196 In actuality, the years are in the realm of 1990-2006 or so. Again, this does not happen with the small csv file. Does anyone know what's going on here and how I can fix it? I need to process the large csv file (the small one was just for testing purposes). By request, here are the actual dates in the csv file and after that the value given by the code above: 5/20/03 15:30 5/20/03 15:30 8/30/04 9:00 8/30/04 9:00 12/20/04 10:30 12/20/04 10:30 Sun Nov 05 15:30:00 EST 2186 Sun Nov 05 15:30:00 EST 2186 Sun Nov 05 15:30:00 EST 2186 Thu Dec 08 09:00:00 EST 2196 Tue Dec 12 10:30:00 EST 2186 Tue Dec 12 10:30:00 EST 2186

  Read the article

• How to catch this low level MySQL (?) error in PHP/Magento

  - by andnil

  When I'm executing the following statement in Magento with a really large $sku, the execution terminates without any errors thrown what so ever. There are no errors in either Magento's, Apache's or PHP's error logs. Mage::getModel('catalog/product')-loadByAttribute('sku', $sku); Question: How do I catch the error? I've tried to set custom error handlers, and for testing purposes I've also managed to trigger error situations where each of the error handler functions are invoked. But when running the previously mentioned Magento code with a large $sku, none of the error handling functions are executed. error_reporting( -1 ); set_error_handler( array( 'Error', 'captureNormal' ) ); set_exception_handler( array( 'Error', 'captureException' ) ); register_shutdown_function( array( 'Error', 'captureShutdown' ) ); For completeness, this is the $sku I'm passing to loadByAttribute(). (The sku is invalid, but that is not the issue) 1- 9685 0102046|1- 9685 1212100|1- 9685 1212092|1- 9685 1212096|1- 9685 1102100|1- 9685 1102108|1- 9685 1102112|1- 9685 1102092|1- 9685 0102048|1- 9685 0102054|1- 9685 0102056|1- 9685 0102058|1- 9685 1212104|1- 9685 1212108|1- 9685 0212058|1- 9685 0104050|1- 9685 0212050|1- 9685 0212056|1- 9685 0212044|1- 9685 0212048|1- 9685 0212052|1- 9685 0212054|1- 9685 1102104|1- 9685 1102124 Any insight into this matter is much appreciated! Update: Upon further investigation, this is the exact point in the code where execution terminates. when the foreach is executed I guess Magento goes into MySQL world and starts loading up data from the database. \Mage\Catalog\Model\Abstract.php public function loadByAttribute($attribute, $value, $additionalAttributes = '*') { $collection = $this->getResourceCollection() ->addAttributeToSelect($additionalAttributes) ->addAttributeToFilter($attribute, $value) ->setPage(1,1); foreach ($collection as $object) { // <--------------- HERE return $object; } return false; } Note, I'm ONLY interested in finding out how to properly CATCH these kinds of errors, not "fix" the logic. This is so that I can present a proper error message to the user. The example above with the malformed sku is contrived and I have no desire to make my Magento app work with those erroneous skus.

  Read the article

• Which are the most useful techniques for faster Bluetooth?

  - by Mike Howard

  Hi. I'm adding peer-to-peer bluetooth using GameKit to an iPhone shoot-em-up, so speed is vital. I'm sending about 40 messages a second each way, most of them with the faster GKSendDataUnreliable, all serializing with NSCoding. In testing between a 3G and 3GS, this is slowing the 3G down a lot more than I'd like. I'm wondering where I should concentrate my efforts to speed it up. How much slower is GKSendDataReliable? For the few packets that have to get there, would it be faster to send a GKSendDataUnreliable and have the peer send an acknowledgement so I can send again if I don't get the Ack within, say, 100ms? How much faster would it be to create the NSData instance using a regular C array rather than archiving with the NSCoding protocol? Is this serialization process (for about a dozen floats) just as slow as you'd expect from an object creation/deallocation overhead, or is something particularly slow happening? I heard that (for example) sending four seperate sets of data is much, much slower, than sending one piece of data four times the size. Would I make a significant saving by sending separate packets of data that wouldn't always go together in the same packet when they happen at the same time? Are there any other bluetooth performance secrets I've missed? Thanks for your help.

  Read the article

• Rapid Opening and Closing System.IO.StreamWriter in C#

  - by ccomet

  Suppose you have a file that you are programmatically logging information into with regards to a process. Kinda like your typical debug Console.WriteLine, but due to the nature of the code you're testing, you don't have a console to write onto so you have to write it somewhere like a file. My current program uses System.IO.StreamWriter for this task. My question is about the approach to using the StreamWriter. Is it better to open just one StreamWriter instance, do all of the writes, and close it when the entire process is done? Or is it a better idea to open a new StreamWriter instance to write a line into the file, then immediately close it, and do this for every time something needs to be written in? In the latter approach, this would probably be facilitated by a method that would do just that for a given message, rather than bloating the main process code with excessive amounts of lines. But having a method to aid in that implementation doesn't necessarily make it the better choice. Are there significant advantages to picking one approach or the other? Or are they functionally equivalent, leaving the choice on the shoulders of the programmer?

  Read the article

• Outlook VSTO AddIn for Meetings

  - by BigDubb

  We have created a VSTO addin for Outlook Meetings. As part of this we trap on the SendEvent of the message on the FormRegionShowing event: _apptEvents.Send += new Microsoft.Office.Interop.Outlook.ItemEvents_SendEventHandler(_apptEvents_Send); The method _apptEvents_Send then tests on a couple of properties and exits where appropriate. private void _apptEvents_Send(ref bool Cancel) { if (!_Qualified) { MessageBox.Show("Meeting has not been qualified", "Not Qualified Meeting", MessageBoxButtons.OK, MessageBoxIcon.Information); chkQualified.Focus(); Cancel = true; } } The problem that we're having is that some users' messages get sent twice. Once when the meeting is sent and a second time when the user re-opens outlook. I've looked for memory leaks, thinking that something might not be getting disposed of properly, and have added explicit object disposal on all finally calls to try and make sure resources are managed, but still getting the functionality incosistently across the organization. i.e. I never encountered the problem during development, nor other developers during testing. All users are up to date on framework (3.5 SP1) and Hotfixes for Outlook. Does anyone have any ideas on what might be causing this? Any ideas anyone might have would be greatly appreciated.

  Read the article

• How do I manage multiple development branches in GIT?

  - by Ian

  I have 5 branches of one system - lets call them master, London, Birmingham, Manchester and demo. These differ in only a configuration file and each has its own set of graphics files. When I do some development, I create a temp branch from master, called after the feature, and work on that. When ready to merge I checkout master, and git merge feature to bring in my work. That appears to work just fine. Now I need to get my changes into the other Branches, without losing the differences between then that are there already. How can I do that? I have been having no end of problems with Birmingham geting London's graphics, and with conflicts within the configuration file. When the branch is finally correct, I push it up to a depot, and pull each Branch down to a linux box for final testing, From there the release into production is using rsync (set to ignore the .git repository itself). This phase works just fine also. I am the only developer at the moment, but I need to get the process solid before inviting assistance :)

  Read the article

• Permission Denied error in IE when closing popups

  - by Kenia

  Hi everyone! I have a simple web testing application which is supposed to open and close several popups by itself (without user interaction). For this purpose i have a javascript function to access the variable where the popup reference is stored and close it if it´s not null, fairly simple. However I get random errors in IE (in FF it works as expected, all popups are closed correctly) like Message: No such interface supported Line: 86 Char: 3 Code: 0 URI: http://10.10.0.61:10000/savmailer/adm/tests/common_tests_code.js and Message: Permission denied Line: 86 Char: 3 Code: 0 URI: http://10.10.0.61:10000/savmailer/adm/tests/common_tests_code.js The line 86 references exactly the point at which I do popup.close(); in the following function function closePopupWindow(popup){ if (popup != null) { popup.close(); popup = null; } } I have googled and it seems this permission denied error is quite common to come through among IE developers, however there´s no clear solution for it, it´s just a matter of changing the code slightly "to please" IE, so to speak. However i have no idea how to change mine since it´s just 3 lines! Tried also to change the security browser settings by adding my domain to the trusted zone, but nothing, doesn't help either. If anyone has any helpful idea or notices something i might be forgetting, please, reply to this! Thanks in advance, Kenia

  Read the article

• only default controller is loading for all request - Critical

  - by Jayapal Chandran

  Hi, My codeigniter project is in live. I have two copies of it. One in the root and another in a subfolder. Both are configered to work normal. The root copy if the one which was made after testing in a subfolder. While running from the a subfolder all worked well. But when copied to the root folder the default controller is loading for all requests. But were as in subfolders and in other servers it is working well. It is like the following A true copy in root folder like sitename.com and another true copy in a subfolder like sitename.com/abc when requesting like this sitename.com/gallery the default controller is loaded instead of gallery controller. When i tried like this sitename.com/index.php/gallery/ then it worked well... but sitename.com/gallery/ is showing only the default controller. that is the index page. here is my htaccess... php_flag magic_quotes_gpc off php_flag short_open_tag on RewriteEngine on RewriteCond $1 !^(index\.php|images|css|static|font|xml|flash|galleryimages|htc|store|robots\.txt) RewriteRule ^(.*)$ index.php/$1 [L] The server is Linux barracuda.elinuxservers.com 2.6.27.18-21 #1 SMP Tue Aug 25 18:13:37 UTC 2009 i686 PHP Version 5.2.9

  Read the article

• Receiving UDP on different Android phones gives different results

  - by user1868982

  I am willing to create a server and client program on my android mobile devices. The devices communicate with each other on the same wifi network, therefore, some simple scanning mechanism must be implemented - The client phones search for a server phone through some kind of broadcast. What I did: My protocol - the client phone broadcasts a message port p on the wifi, the server listens on port p. when the server gets the broadcast message it sends a message back, therefore discovering itself to the client. My code - I have opened a broadcast socket on my app, it sends a broadcast message. Meanwhile there is a python script on my PC that listens and replies - I use python so that my testing will be easier - Wireshark on the PC and I can see everything. What happens: When I use one of my Galaxy S phones - it works and I get a response. When I use the other Galaxy S phone - it doesn't work. Now this is what I know: The phone that works actually has Nexus ROM on it Ver. 4.1.1 The phone that doesn't work has 2.3.3 regular galaxy ROM The python code says it receives both of the broadcasts sent from both phones, and replies to both of them without raising any exception. So far I was thought the problem may be 1. the older version'd phone. 2. the windows firewall 3. the router firewall So I have opened Wireshark, and Indeed I saw that both phones are sending their broadcasts - it was logged on Wireshark. But the python script only responded to the first one. So this is why 1 & 3 are irrelevant - if the router firewall was blocking my UDP I would have still seen the python server response, same with the older versioned phone. To get rid of 2 i just disabled the windows firewall - still same problem. Does anyone has a clue to why this effect might happen? Thanks!

  Read the article

< Previous Page | 440 441 442 443 444 445 446 447 448 449 450 451  | Next Page >