Search Results

Search found 17969 results on 719 pages for 'computer maintenance'.

Page 444/719 | < Previous Page | 440 441 442 443 444 445 446 447 448 449 450 451  | Next Page >

• DHCPv6: Provide IPv6 information in your local network

  Even though IPv6 might not be that important within your local network it might be good to get yourself into shape, and be able to provide some details of your infrastructure automatically to your network clients. This is the second article in a series on IPv6 configuration: Configure IPv6 on your Linux system DHCPv6: Provide IPv6 information in your local network Enabling DNS for IPv6 infrastructure Accessing your web server via IPv6 Piece of advice: This is based on my findings on the internet while reading other people's helpful articles and going through a couple of man-pages on my local system. IPv6 addresses for everyone (in your network) Okay, after setting up the configuration of your local system, it might be interesting to enable all your machines in your network to use IPv6. There are two options to solve this kind of requirement... Either you're busy like a bee and you go around to configure each and every system manually, or you're more the lazy and effective type of network administrator and you prefer to work with Dynamic Host Configuration Protocol (DHCP). Obviously, I'm of the second type. Enabling dynamic IPv6 address assignments can be done with a new or an existing instance of a DHCPd. In case of Ubuntu-based installation this might be isc-dhcp-server. The isc-dhcp-server allows address pooling for IP and IPv6 within the same package, you just have to run to independent daemons for each protocol version. First, check whether isc-dhcp-server is already installed and maybe running your machine like so: $ service isc-dhcp-server6 status In case, that the service is unknown, you have to install it like so: $ sudo apt-get install isc-dhcp-server Please bear in mind that there is no designated installation package for IPv6. Okay, next you have to create a separate configuration file for IPv6 address pooling and network parameters called /etc/dhcp/dhcpd6.conf. This file is not automatically provided by the package, compared to IPv4. Again, use your favourite editor and put the following lines: $ sudo nano /etc/dhcp/dhcpd6.conf authoritative;default-lease-time 14400; max-lease-time 86400;log-facility local7;subnet6 2001:db8:bad:a55::/64 {    option dhcp6.name-servers 2001:4860:4860::8888, 2001:4860:4860::8844;    option dhcp6.domain-search "ios.mu";    range6 2001:db8:bad:a55::100 2001:db8:bad:a55::199;    range6 2001:db8:bad:a55::/64 temporary;} Next, save the file and start the daemon as a foreground process to see whether it is going to listen to requests or not, like so: $ sudo /usr/sbin/dhcpd -6 -d -cf /etc/dhcp/dhcpd6.conf eth0 The parameters are explained quickly as -6 we want to run as a DHCPv6 server, -d we are sending log messages to the standard error descriptor (so you should monitor your /var/log/syslog file, too), and we explicitely want to use our newly created configuration file (-cf). You might also use the command switch -t to test the configuration file prior to running the server. In my case, I ended up with a couple of complaints by the server, especially reporting that the necessary lease file wouldn't exist. So, ensure that the lease file for your IPv6 address assignments is present: $ sudo touch /var/lib/dhcp/dhcpd6.leases$ sudo chown dhcpd:dhcpd /var/lib/dhcp/dhcpd6.leases Now, you should be good to go. Stop your foreground process and try to run the DHCPv6 server as a service on your system: $ sudo service isc-dhcp-server6 startisc-dhcp-server6 start/running, process 15883 Check your log file /var/log/syslog for any kind of problems. Refer to the man-pages of isc-dhcp-server and you might check out Chapter 22.6 of Peter Bieringer's IPv6 Howto. The instructions regarding DHCPv6 on the Ubuntu Wiki are not as complete as expected and it might not be as helpful as this article or Peter's HOWTO. But see for yourself. Does the client get an IPv6 address? Running a DHCPv6 server on your local network surely comes in handy but it has to work properly. The following paragraphs describe briefly how to check the IPv6 configuration of your clients, Linux - ifconfig or ip command First, you have enable IPv6 on your Linux by specifying the necessary directives in the /etc/network/interfaces file, like so: $ sudo nano /etc/network/interfaces iface eth1 inet6 dhcp Note: Your network device might be eth0 - please don't just copy my configuration lines. Then, either restart your network subsystem, or enable the device manually using the dhclient command with IPv6 switch, like so: $ sudo dhclient -6 You would either use the ifconfig or (if installed) the ip command to check the configuration of your network device like so: $ sudo ifconfig eth1eth1      Link encap:Ethernet  HWaddr 00:1d:09:5d:8d:98            inet addr:192.168.160.147  Bcast:192.168.160.255  Mask:255.255.255.0          inet6 addr: 2001:db8:bad:a55::193/64 Scope:Global          inet6 addr: fe80::21d:9ff:fe5d:8d98/64 Scope:Link          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1 Looks good, the client has an IPv6 assignment. Now, let's see whether DNS information has been provided, too. $ less /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)#     DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTENnameserver 2001:4860:4860::8888nameserver 2001:4860:4860::8844nameserver 192.168.1.2nameserver 127.0.1.1search ios.mu Nicely done. Windows - netsh Per description on TechNet the netsh is defined as following: "Netsh is a command-line scripting utility that allows you to, either locally or remotely, display or modify the network configuration of a computer that is currently running. Netsh also provides a scripting feature that allows you to run a group of commands in batch mode against a specified computer. Netsh can also save a configuration script in a text file for archival purposes or to help you configure other servers." And even though TechNet states that it applies to Windows Server (only), it is also available on Windows client operating systems, like Vista, Windows 7 and Windows 8. In order to get or even set information related to IPv6 protocol, we have to switch the netsh interface context prior to our queries. Open a command prompt in Windows and run the following statements: C:\Users\joki>netshnetsh>interface ipv6netsh interface ipv6>show interfaces Select the device index from the Idx column to get more details about the IPv6 address and DNS server information (here: I'm going to use my WiFi device with device index 11), like so: netsh interface ipv6>show address 11 Okay, address information has been provided. Now, let's check the details about DNS and resolving host names: netsh interface ipv6> show dnsservers 11 Okay, that looks good already. Our Windows client has a valid IPv6 address lease with lifetime information and details about the configured DNS servers. Talking about DNS server... Your clients should be able to connect to your network servers via IPv6 using hostnames instead of IPv6 addresses. Please read on about how to enable a local named with IPv6.

  Read the article

• Oracle's Global Single Schema

  - by david.butler(at)oracle.com

  Maximizing business process efficiencies in a heterogeneous environment is very difficult. The difficulty stems from the fact that the various applications across the Information Technology (IT) landscape employ different integration standards, different message passing strategies, and different workflow engines. Vendors such as Oracle and others are delivering tools to help IT organizations manage the complexities introduced by these differences. But the one remaining intractable problem impacting efficient operations is the fact that these applications have different definitions for the same business data. Business data is your business information codified for computer programs to use. A good data model will represent the way your organization does business. The computer applications your organization deploys to improve operational efficiency are built to operate on the business data organized into this schema.  If the schema does not represent how you do business, the applications on that schema cannot provide the features you need to achieve the desired efficiencies. Business processes span these applications. Data problems break these processes rendering them far less efficient than they need to be to achieve organization goals. Thus, the expected return on the investment in these applications is never realized. The success of all business processes depends on the availability of accurate master data.  Clearly, the solution to this problem is to consolidate all the master data an organization uses to run its business. Then clean it up, augment it, govern it, and connect it back to the applications that need it. Until now, this obvious solution has been difficult to achieve because no one had defined a data model sufficiently broad, deep and flexible enough to support transaction processing on all key business entities and serve as a master superset to all other operational data models deployed in heterogeneous IT environments. Today, the situation has changed. Oracle has created an operational data model (aka schema) that can support accurate and consistent master data across heterogeneous IT systems. This is foundational for providing a way to consolidate and integrate master data without having to replace investments in existing applications. This Global Single Schema (GSS) represents a revolutionary breakthrough that allows for true master data consolidation. Oracle has deep knowledge of applications dating back to the early 1990s.  It developed applications in the areas of Supply Chain Management (SCM), Product Lifecycle Management (PLM), Enterprise Resource Planning (ERP), Customer Relationship Management (CRM), Human Capital Management (HCM), Financials and Manufacturing. In addition, Oracle applications were delivered for key industries such as Communications, Financial Services, Retail, Public Sector, High Tech Manufacturing (HTM) and more. Expertise in all these areas drove requirements for GSS. The following figure illustrates Oracle's unique position that enabled the creation of the Global Single Schema. GSS Requirements Gathering GSS defines all the key business entities and attributes including Customers, Contacts, Suppliers, Accounts, Products, Services, Materials, Employees, Installed Base, Sites, Assets, and Inventory to name just a few. In addition, Oracle delivers GSS pre-integrated with a wide variety of operational applications.  Business Process Automation EBusiness is about maximizing operational efficiency. At the highest level, these 'operations' span all that you do as an organization.  The following figure illustrates some of these high-level business processes. Enterprise Business Processes Supplies are procured. Assets are maintained. Materials are stored. Inventory is accumulated. Products and Services are engineered, produced and sold. Customers are serviced. And across this entire spectrum, Employees do the procuring, supporting, engineering, producing, selling and servicing. Not shown, but not to be overlooked, are the accounting and the financial processes associated with all this procuring, manufacturing, and selling activity. Supporting all these applications is the master data. When this data is fragmented and inconsistent, the business processes fail and inefficiencies multiply. But imagine having all the data under these operational business processes in one place. ·            The same accurate and timely customer data will be provided to all your operational applications from the call center to the point of sale. ·            The same accurate and timely supplier data will be provided to all your operational applications from supply chain planning to procurement. ·            The same accurate and timely product information will be available to all your operational applications from demand chain planning to marketing. You would have a single version of the truth about your assets, financial information, customers, suppliers, employees, products and services to support your business automation processes as they flow across your business applications. All company and partner personnel will access the same exact data entity across all your channels and across all your lines of business. Oracle's Global Single Schema enables this vision of a single version of the truth across the heterogeneous operational applications supporting the entire enterprise. Global Single Schema Oracle's Global Single Schema organizes hundreds of thousands of attributes into 165 major schema objects supporting over 180 business application modules. It is designed for international operations, and extensibility.  The schema is delivered with a full set of public Application Programming Interfaces (APIs) and an Integration Repository with modern Service Oriented Architecture interfaces to make data available as a services (DaaS) to business processes and enable operations in heterogeneous IT environments. ·         Key tables can be extended with unlimited numbers of additional attributes and attribute groups for maximum flexibility.  o    This enables model extensions that reflect business entities unique to your organization's operations. ·         The schema is multi-organization enabled so data manipulation can be controlled along organizational boundaries. ·         It uses variable byte Unicode to support over 31 languages. ·         The schema encodes flexible date and flexible address formats for easy localizations. No matter how complex your business is, Oracle's Global Single Schema can hold your business objects and support your global operations. Oracle's Global Single Schema identifies and defines the business objects an enterprise needs within the context of its business operations. The interrelationships between the business objects are also contained within the GSS data model. Their presence expresses fundamental business rules for the interaction between business entities. The following figure illustrates some of these connections.   Interconnected Business Entities Interconnecte business processes require interconnected business data. No other MDM vendor has this capability. Everyone else has either one entity they can master or separate disconnected models for various business entities. Higher level integrations are made available, but that is a weak architectural alternative to data level integration in this critically important aspect of Master Data Management.    

  Read the article

• More Fun With Math

  - by PointsToShare

  More Fun with Math   The runaway student – three different ways of solving one problem Here is a problem I read in a Russian site: A student is running away. He is moving at 1 mph. Pursuing him are a lion, a tiger and his math teacher. The lion is 40 miles behind and moving at 6 mph. The tiger is 28 miles behind and moving at 4 mph. His math teacher is 30 miles behind and moving at 5 mph. Who will catch him first? Analysis Obviously we have a set of three problems. They are all basically the same, but the details are different. The problems are of the same class. Here is a little excursion into computer science. One of the things we strive to do is to create solutions for classes of problems rather than individual problems. In your daily routine, you call it re-usability. Not all classes of problems have such solutions. If a class has a general (re-usable) solution, it is called computable. Otherwise it is unsolvable. Within unsolvable classes, we may still solve individual (some but not all) problems, albeit with different approaches to each. Luckily the vast majority of our daily problems are computable, and the 3 problems of our runaway student belong to a computable class. So, let’s solve for the catch-up time by the math teacher, after all she is the most frightening. She might even make the poor runaway solve this very problem – perish the thought! Method 1 – numerical analysis. At 30 miles and 5 mph, it’ll take her 6 hours to come to where the student was to begin with. But by then the student has advanced by 6 miles. 6 miles require 6/5 hours, but by then the student advanced by another 6/5 of a mile as well. And so on and so forth. So what are we to do? One way is to write code and iterate it until we have solved it. But this is an infinite process so we’ll end up with an infinite loop. So what to do? We’ll use the principles of numerical analysis. Any calculator – your computer included – has a limited number of digits. A double floating point number is good for about 14 digits. Nothing can be computed at a greater accuracy than that. This means that we will not iterate ad infinidum, but rather to the point where 2 consecutive iterations yield the same result. When we do financial computations, we don’t even have to go that far. We stop at the 10th of a penny.  It behooves us here to stop at a 10th of a second (100 milliseconds) and this will how we will avoid an infinite loop. Interestingly this alludes to the Zeno paradoxes of motion – in particular “Achilles and the Tortoise”. Zeno says exactly the same. To catch the tortoise, Achilles must always first come to where the tortoise was, but the tortoise keeps moving – hence Achilles will never catch the tortoise and our math teacher (or lion, or tiger) will never catch the student, or the policeman the thief. Here is my resolution to the paradox. The distance and time in each step are smaller and smaller, so the student will be caught. The only thing that is infinite is the iterative solution. The race is a convergent geometric process so the steps are diminishing, but each step in the solution takes the same amount of effort and time so with an infinite number of steps, we’ll spend an eternity solving it.  This BTW is an original thought that I have never seen before. But I digress. Let’s simply write the code to solve the problem. To make sure that it runs everywhere, I’ll do it in JavaScript. function LongCatchUpTime(D, PV, FV) // D is Distance; PV is Pursuers Velocity; FV is Fugitive’ Velocity {     var t = 0;     var T = 0;     var d = parseFloat(D);     var pv = parseFloat (PV);     var fv = parseFloat (FV);     t = d / pv;     while (t > 0.000001) //a 10th of a second is 1/36,000 of an hour, I used 1/100,000     {         T = T + t;         d = t * fv;         t = d / pv;     }     return T;     } By and large, the higher the Pursuer’s velocity relative to the fugitive, the faster the calculation. Solving this with the 10th of a second limit yields: 7.499999232000001 Method 2 – Geometric Series. Each step in the iteration above is smaller than the next. As you saw, we stopped iterating when the last step was small enough, small enough not to really matter.  When we have a sequence of numbers in which the ratio of each number to its predecessor is fixed we call the sequence geometric. When we are looking at the sum of sequence, we call the sequence of sums series.  Now let’s look at our student and teacher. The teacher runs 5 times faster than the student, so with each iteration the distance between them shrinks to a fifth of what it was before. This is a fixed ratio so we deal with a geometric series.  We normally designate this ratio as q and when q is less than 1 (0 < q < 1) the sum of  + … +  is  – 1) / (q – 1). When q is less than 1, it is easier to use ) / (1 - q). Now, the steps are 6 hours then 6/5 hours then 6/5*5 and so on, so q = 1/5. And the whole series is multiplied by 6. Also because q is less than 1 , 1/  diminishes to 0. So the sum is just  / (1 - q). or 1/ (1 – 1/5) = 1 / (4/5) = 5/4. This times 6 yields 7.5 hours. We can now continue with some algebra and take it back to a simpler formula. This is arduous and I am not going to do it here. Instead let’s do some simpler algebra. Method 3 – Simple Algebra. If the time to capture the fugitive is T and the fugitive travels at 1 mph, then by the time the pursuer catches him he travelled additional T miles. Time is distance divided by speed, so…. (D + T)/V = T  thus D + T = VT  and D = VT – T = (V – 1)T  and T = D/(V – 1) This “strangely” coincides with the solution we just got from the geometric sequence. This is simpler ad faster. Here is the corresponding code. function ShortCatchUpTime(D, PV, FV) {     var d = parseFloat(D);     var pv = parseFloat (PV);     var fv = parseFloat (FV);     return d / (pv - fv); } The code above, for both the iterative solution and the algebraic solution are actually for a larger class of problems.  In our original problem the student’s velocity (speed) is 1 mph. In the code it may be anything as long as it is less than the pursuer’s velocity. As long as PV > FV, the pursuer will catch up. Here is the really general formula: T = D / (PV – FV) Finally, let’s run the program for each of the pursuers.  It could not be worse. I know he’d rather be eaten alive than suffering through yet another math lesson. See the code run? Select  “Catch Up Time” in www.mgsltns.com/games.htm The host is running on Unix, so the link is case sensitive. That’s All Folks

  Read the article

• Self-signed certificates for a known community

  - by costlow

  Recently announced changes scheduled for Java 7 update 51 (January 2014) have established that the default security slider will require code signatures and the Permissions Manifest attribute. Code signatures are a common practice recommended in the industry because they help determine that the code your computer will run is the same code that the publisher created. This post is written to help users that need to use self-signed certificates without involving a public Certificate Authority. The role of self-signed certificates within a known community You may still use self-signed certificates within a known community. The difference between self-signed and purchased-from-CA is that your users must import your self-signed certificate to indicate that it is valid, whereas Certificate Authorities are already trusted by default. This works for known communities where people will trust that my certificate is mine, but does not scale widely where I cannot actually contact or know the systems that will need to trust my certificate. Public Certificate Authorities are widely trusted already because they abide by many different requirements and frequent checks. An example would be students in a university class sharing their public certificates on a mailing list or web page, employees publishing on the intranet, or a system administrator rolling certificates out to end-users. Managed machines help this because you can automate the rollout, but they are not required -- the major point simply that people will trust and import your certificate. How to distribute self-signed certificates for a known community There are several steps required to distribute a self-signed certificate to users so that they will properly trust it. These steps are: Creating a public/private key pair for signing. Exporting your public certificate for others Importing your certificate onto machines that should trust you Verify work on a different machine Creating a public/private key pair for signing Having a public/private key pair will give you the ability both to sign items yourself and issue a Certificate Signing Request (CSR) to a certificate authority. Create your public/private key pair by following the instructions for creating key pairs.Every Certificate Authority that I looked at provided similar instructions, but for the sake of cohesiveness I will include the commands that I used here: Generate the key pair.keytool -genkeypair -alias erikcostlow -keyalg EC -keysize 571 -validity 730 -keystore javakeystore_keepsecret.jks Provide a good password for this file. The alias "erikcostlow" is my name and therefore easy to remember. Substitute your name of something like "mykey." The sigalg of EC (Elliptical Curve) and keysize of 571 will give your key a good strong lifetime. All keys are set to expire. Two years or 730 days is a reasonable compromise between not-long-enough and too-long. Most public Certificate Authorities will sign something for one to five years. You will be placing your keys in javakeystore_keepsecret.jks -- this file will contain private keys and therefore should not be shared. If someone else gets these private keys, they can impersonate your signature. Please be cautious about automated cloud backup systems and private key stores. Answer all the questions. It is important to provide good answers because you will stick with them for the "-validity" days that you specified above.What is your first and last name?  [Unknown]:  First LastWhat is the name of your organizational unit?  [Unknown]:  Line of BusinessWhat is the name of your organization?  [Unknown]:  MyCompanyWhat is the name of your City or Locality?  [Unknown]:  City NameWhat is the name of your State or Province?  [Unknown]:  CAWhat is the two-letter country code for this unit?  [Unknown]:  USIs CN=First Last, OU=Line of Business, O=MyCompany, L=City, ST=CA, C=US correct?  [no]:  yesEnter key password for <erikcostlow>        (RETURN if same as keystore password): Verify your work:keytool -list -keystore javakeystore_keepsecret.jksYou should see your new key pair. Exporting your public certificate for others Public Key Infrastructure relies on two simple concepts: the public key may be made public and the private key must be private. By exporting your public certificate, you are able to share it with others who can then import the certificate to trust you. keytool -exportcert -keystore javakeystore_keepsecret.jks -alias erikcostlow -file erikcostlow.cer To verify this, you can open the .cer file by double-clicking it on most operating systems. It should show the information that you entered during the creation prompts. This is the file that you will share with others. They will use this certificate to prove that artifacts signed by this certificate came from you. If you do not manage machines directly, place the certificate file on an area that people within the known community should trust, such as an intranet page. Import the certificate onto machines that should trust you In order to trust the certificate, people within your known network must import your certificate into their keystores. The first step is to verify that the certificate is actually yours, which can be done through any band: email, phone, in-person, etc. Known networks can usually do this Determine the right keystore: For an individual user looking to trust another, the correct file is within that user’s directory.e.g. USER_HOME\AppData\LocalLow\Sun\Java\Deployment\security\trusted.certs For system-wide installations, Java’s Certificate Authorities are in JAVA_HOMEe.g. C:\Program Files\Java\jre8\lib\security\cacerts File paths for Mac and Linux are included in the link above. Follow the instructions to import the certificate into the keystore. keytool -importcert -keystore THEKEYSTOREFROMABOVE -alias erikcostlow -file erikcostlow.cer In this case, I am still using my name for the alias because it’s easy for me to remember. You may also use an alias of your company name. Scaling distribution of the import The easiest way to apply your certificate across many machines is to just push the .certs or cacerts file onto them. When doing this, watch out for any changes that people would have made to this file on their machines. Trusted.certs: When publishing into user directories, your file will overwrite any keys that the user has added since last update. CACerts: It is best to re-run the import command with each installation rather than just overwriting the file. If you just keep the same cacerts file between upgrades, you will overwrite any CAs that have been added or removed. By re-importing, you stay up to date with changes. Verify work on a different machine Verification is a way of checking on the client machine to ensure that it properly trusts signed artifacts after you have added your signing certificate. Many people have started using deployment rule sets. You can validate the deployment rule set by: Create and sign the deployment rule set on the computer that holds the private key. Copy the deployment rule set on to the different machine where you have imported the signing certificate. Verify that the Java Control Panel’s security tab shows your deployment rule set. Verifying an individual JAR file or multiple JAR files You can test a certificate chain by using the jarsigner command. jarsigner -verify filename.jar If the output does not say "jar verified" then run the following command to see why: jarsigner -verify -verbose -certs filename.jar Check the output for the term “CertPath not validated.”

  Read the article

• CodePlex Daily Summary for Tuesday, July 02, 2013

  CodePlex Daily Summary for Tuesday, July 02, 2013Popular ReleasesMastersign.Expressions: Mastersign.Expressions v0.4.2: added support for if(<cond>, <true-part>, <false-part>) fixed multithreading issue with rand() improved demo applicationNB_Store - Free DotNetNuke Ecommerce Catalog Module: NB_Store v2.3.6 Rel0: v2.3.6 Is now DNN6 and DNN7 compatible Important : During update this install with overwrite the menu.xml setting, if you have changed this then make a backup before you upgrade and reapply your changes after the upgrade. Please view the following documentation if you are installing and configuring this module for the first time System Requirements Skill requirements Downloads and documents Step by step guide to a working store Please ask all questions in the Discussions tab. Document.Editor: 2013.26: What's new for Document.Editor 2013.26: New Insert Chart Improved User Interface Minor Bug Fix's, improvements and speed upsWsus Package Publisher: Release V1.2.1307.01: Fix an issue in the UI, approvals are not shown correctly in the 'Report' tabDirectX Tool Kit: July 2013: July 1, 2013 VS 2013 Preview projects added and updates for DirectXMath 3.05 vectorcall Added use of sRGB WIC metadata for JPEG, PNG, and TIFF SaveToWIC functions updated with new optional setCustomProps parameter and error check with optional targetFormatCore Server 2012 Powershell Script Hyper-v Manager: new_root.zip: Verison 1.0JSON Toolkit: JSON Toolkit 4.1.736: Improved strinfigy performance New serializing feature New anonymous type support in constructorsDotNetNuke® IFrame: IFrame 04.05.00: New DNN6/7 Manifest file and Azure Compatibility.VidCoder: 1.5.2 Beta: Fixed crash on presets with an invalid bitrate.Gardens Point LEX: Gardens Point LEX version 1.2.1: The main distribution is a zip file. This contains the binary executable, documentation, source code and the examples. ChangesVersion 1.2.1 has new facilities for defining and manipulating character classes. These changes make the construction of large Unicode character classes more convenient. The runtime code for performing automaton backup has been re-implemented, and is now faster for scanners that need backup. Source CodeThe distribution contains a complete VS2010 project for the appli...ZXMAK2: Version 2.7.5.7: - fix TZX emulation (Bruce Lee, Zynaps) - fix ATM 16 colors for border - add memory module PROFI 512K; add PROFI V03 rom image; fix PROFI 3.XX configTwitter image Downloader: Twitter Image Downloader 2 with Installer: Application file with Install shield and Dot Net 4.0 redistributableUltimate Music Tagger: Ultimate Music Tagger 1.0.0.0: First release of Ultimate Music TaggerBlackJumboDog: Ver5.9.2: 2013.06.28 Ver5.9.2 (1) ??????????(????SMTP?????)?????????? (2) HTTPS???????????Outlook 2013 Add-In: Configuration Form: This new version includes the following changes: - Refactored code a bit. - Removing configuration from main form to gain more space to display items. - Moved configuration to separate form. You can click the little "gear" icon to access the configuration form (still very simple). - Added option to show past day appointments from the selected day (previous in time, that is). - Added some tooltips. You will have to uninstall the previous version (add/remove programs) if you had installed it ...Terminals: Version 3.0 - Release: Changes since version 2.0:Choose 100% portable or installed version Removed connection warning when running RDP 8 (Windows 8) client Fixed Active directory search Extended Active directory search by LDAP filters Fixed single instance mode when running on Windows Terminal server Merged usage of Tags and Groups Added columns sorting option in tables No UAC prompts on Windows 7 Completely new file persistence data layer New MS SQL persistence layer (Store data in SQL database)...NuGet: NuGet 2.6: Released June 26, 2013. Release notes: http://docs.nuget.org/docs/release-notes/nuget-2.6Python Tools for Visual Studio: 2.0 Beta: We’re pleased to announce the release of Python Tools for Visual Studio 2.0 Beta. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including CPython/IronPython, Edit/Intellisense/Debug/Profile, Cloud, HPC, IPython, and cross platform debugging support. For a quick overview of the general IDE experience, please watch this video: http://www.youtube.com/watch?v=TuewiStN...Player Framework by Microsoft: Player Framework for Windows 8 and WP8 (v1.3 beta): Preview: New MPEG DASH adaptive streaming plugin for Windows Azure Media Services Preview: New Ultraviolet CFF plugin. Preview: New WP7 version with WP8 compatibility. (source code only) Source code is now available via CodePlex Git Misc bug fixes and improvements: WP8 only: Added optional fullscreen and mute buttons to default xaml JS only: protecting currentTime from returning infinity. Some videos would cause currentTime to be infinity which could cause errors in plugins expectin...AssaultCube Reloaded: 2.5.8: SERVER OWNERS: note that the default maprot has changed once again. Linux has Ubuntu 11.10 32-bit precompiled binaries and Ubuntu 10.10 64-bit precompiled binaries, but you can compile your own as it also contains the source. If you are using Mac or other operating systems, please wait while we continue to try to package for those OSes. Or better yet, try to compile it. If it fails, download a virtual machine. The server pack is ready for both Windows and Linux, but you might need to compi...New ProjectsALM Rangers DevOps Tooling and Guidance: Practical tooling and guidance that will enable teams to realize a faster deployment based on continuous feedback.Core Server 2012 Powershell Script Hyper-v Manager: Free core Server 2012 powershell scripts and batch files that replace the non-existent hyper-v manager, vmconnect and mstsc.Enhanced Deployment Service (EDS): EDS is a web service based utility designed to extend the deployment capabilities of administrators with the Microsoft Deployment Toolkit.ExtendedDialogBox: Libreria DialogBoxJazdy: This project is here only because we wanted to take advantage of a public git server.Mon Examen: This web interface is meant to make examinationsneet: summaryOrchard Multi-Choice Voting: A multiple choice voting Orchard module.Particle Swarm Optimization Solving Quadratic Assignment Problem: This project is submitted for the solving of QAP using PSO algorithms with addition of some modification Porjects: 23123123PPL Power Pack: PPL Power PackProperty Builder: Visual Studio tool for speeding up process of coding class properties getters and setters.RedRuler for Redline: I tried some on-screen rulers, none of them help me measure the UI element quickly based on the Redline. So I decided to created this handy RedRuler tool. Royale Living: Mahindra Royale Community PortalSearch and booking Hotel or Tours: Ð? án nghiên c?u c?a sinh viên tdt theo mô hình mvc 4SystemBuilder.Show: This tool is a helper after you create your project in visual studio to create the respective objects and interface. TalentDesk: new ptojectTcmplex: The Training Center teaches many different kind of course such as English, French, Computer hardware and computer softwareTFS Reporting Guide: Provides guidance and samples to enable TFS users to generate reports based on WIT data.Umbraco AdaptiveImages: Adaptive Images Package for UmbracoVirtualNet - A ILcode interpreter/emulator written in C++/Assembly: VirtualNet is a interpreter/emulator for running .net code in native without having to install the .Net FrameWorkVisual Blocks: Visual Blocks ????IDE ????? ??????? ????? ????/?? Visual Studio and Cloud Based Mobile Device Testing: Practical guidance enabling field to remove blockers to adoption and to use and extend the Perfecto Mobile Cloud Device testing within the context of VS.Windows 8 Time Picker for Windows Phone: A Windows Phone implementation of the Time Picker control found in the Windows 8.1 Alarms app.???? - SmallBasic?: ?????????

  Read the article

• The challenge of communicating externally with IRM secured content

  - by Simon Thorpe

  I am often asked by customers about how they handle sending IRM secured documents to external parties. Their concern is that using IRM to secure sensitive information they need to share outside their business, is troubled with the inability for third parties to install the software which enables them to gain access to the information. It is a very legitimate question and one i've had to answer many times in the past 10 years whilst helping customers plan successful IRM deployments. The operating system does not provide the required level of content security The problem arises from what IRM delivers, persistent security to your sensitive information where ever it resides and whenever it is in use. Oracle IRM gives customers an array of features that help ensure sensitive information in an IRM document or email is always protected and only accessed by authorized users using legitimate applications. Examples of such functionality are; Control of the clipboard, either by disabling completely in the opened document or by allowing the cut and pasting of information between secured IRM documents but not into insecure applications. Protection against programmatic access to the document. Office documents and PDF documents have the ability to be accessed by other applications and scripts. With Oracle IRM we have to protect against this to ensure content cannot be leaked by someone writing a simple program. Securing of decrypted content in memory. At some point during the process of opening and presenting a sealed document to an end user, we must decrypt it and give it to the application (Adobe Reader, Microsoft Word, Excel etc). This process must be secure so that someone cannot simply get access to the decrypted information. The operating system alone just doesn't have the functionality to deliver these types of features. This is why for every IRM technology there must be some extra software installed and typically this software requires administrative rights to do so. The fact is that if you want to have very strong security and access control over a document you are going to send to someone who is beyond your network infrastructure, there must be some software to provide that functionality. Simple installation with Oracle IRM The software used to control access to Oracle IRM sealed content is called the Oracle IRM Desktop. It is a small, free piece of software roughly about 12mb in size. This software delivers functionality for everything a user needs to work with an Oracle IRM solution. It provides the functionality for all formats we support, the storage and transparent synchronization of user rights and unique to Oracle, the ability to search inside sealed files stored on the local computer. In Oracle we've made every technical effort to ensure that installing this software is a simple as possible. In situations where the user's computer is part of the enterprise, this software is typically deployed using existing technologies such as Systems Management Server from Microsoft or by using Active Directory Group Policies. However when sending sealed content externally, you cannot automatically install software on the end users machine. You need to rely on them to download and install themselves. Again we've made every effort for this manual install process to be as simple as we can. Starting with the small download size of the software itself to the simple installation process, most end users are able to install and access sealed content very quickly. You can see for yourself how easily this is done by walking through our free and easy self service demonstration of using sealed content. How to handle objections and ensure there is value However the fact still remains that end users may object to installing, or may simply be unable to install the software themselves due to lack of permissions. This is often a problem with any technology that requires specialized software to access a new type of document. In Oracle, over the past 10 years, we've learned many ways to get over this barrier of getting software deployed by external users. First and I would say of most importance, is the content MUST have some value to the person you are asking to install software. Without some type of value proposition you are going to find it very difficult to get past objections to installing the IRM Desktop. Imagine if you were going to secure the weekly campus restaurant menu and send this to contractors. Their initial response will be, "why on earth are you asking me to download some software just to access your menu!?". A valid objection... there is no value to the user in doing this. Now consider the scenario where you are sending one of your contractors their employment contract which contains their address, social security number and bank account details. Are they likely to take 5 minutes to install the IRM Desktop? You bet they are, because there is real value in doing so and they understand why you are doing it. They want their personal information to be securely handled and a quick download and install of some software is a small task in comparison to dealing with the loss of this information. Be clear in communicating this value So when sending sealed content to people externally, you must be clear in communicating why you are using an IRM technology and why they need to install some software to access the content. Do not try and avoid the issue, you must be clear and upfront about it. In doing so you will significantly reduce the "I didn't know I needed to do this..." responses and also gain respect for being straight forward. One customer I worked with, 6 months after the initial deployment of Oracle IRM, called me panicking that the partner they had started to share their engineering documents with refused to install any software to access this highly confidential intellectual property. I explained they had to communicate to the partner why they were doing this. I told them to go back with the statement that "the company takes protecting its intellectual property seriously and had decided to use IRM to control access to engineering documents." and if the partner didn't respect this decision, they would find another company that would. The result? A few days later the partner had made the Oracle IRM Desktop part of their approved list of software in the company. Companies are successful when sending sealed content to third parties We have many, many customers who send sensitive content to third parties. Some customers actually sell access to Oracle IRM protected content and therefore 99% of their users are external to their business, one in particular has sold content to hundreds of thousands of external users. Oracle themselves use the technology to secure M&A documents, payroll data and security assessments which go beyond the traditional enterprise security perimeter. Pretty much every company who deploys Oracle IRM will at some point be sending those documents to people outside of the company, these customers must be successful otherwise Oracle IRM wouldn't be successful. Because our software is used by a wide variety of companies, some who use it to sell content, i've often run into people i'm sharing a sealed document with and they already have the IRM Desktop installed due to accessing content from another company. The future In summary I would say that yes, this is a hurdle that many customers are concerned about but we see much evidence that in practice, people leap that hurdle with relative ease as long as they are good at communicating the value of using IRM and also take measures to ensure end users can easily go through the process of installation. We are constantly developing new ideas to reducing this hurdle and maybe one day the operating systems will give us enough rich security functionality to have no software installation. Until then, Oracle IRM is by far the easiest solution to balance security and usability for your business. If you would like to evaluate it for yourselves, please contact us.

  Read the article

• SQL SERVER – Create a Very First Report with the Report Wizard

  - by Pinal Dave

  This example is from the Beginning SSRS by Kathi Kellenberger. Supporting files are available with a free download from the www.Joes2Pros.com web site. What is the report Wizard? In today’s world automation is all around you. Henry Ford began building his Model T automobiles on a moving assembly line a century ago and changed the world. The moving assembly line allowed Ford to build identical cars quickly and cheaply. Henry Ford said in his autobiography “Any customer can have a car painted any color that he wants so long as it is black.” Today you can buy a car straight from the factory with your choice of several colors and with many options like back up cameras, built-in navigation systems and heated leather seats. The assembly lines now use robots to perform some tasks along with human workers. When you order your new car, if you want something special, not offered by the manufacturer, you will have to find a way to add it later. In computer software, we also have “assembly lines” called wizards. A wizard will ask you a series of questions, often branching to specific questions based on earlier answers, until you get to the end of the wizard. These wizards are used for many things, from something simple like setting up a rule in Outlook to performing administrative tasks on a server. Often, a wizard will get you part of the way to the end result, enough to get much of the tedious work out of the way. Once you get the product from the wizard, if the wizard is not capable of doing something you need, you can tweak the results. Create a Report with the Report Wizard Let’s get started with your first report!  Launch SQL Server Data Tools (SSDT) from the Start menu under SQL Server 2012. Once SSDT is running, click New Project to launch the New Project dialog box. On the left side of the screen expand Business Intelligence and select Reporting Services. Configure the properties as shown in . Be sure to select Report Server Project Wizard as the type of report and to save the project in the C:\Joes2Pros\SSRSCompanionFiles\Chapter3\Project folder. Click OK and wait for the Report Wizard to launch. Click Next on the Welcome screen.  On the Select the Data Source screen, make sure that New data source is selected. Type JProCo as the data source name. Make sure that Microsoft SQL Server is selected in the Type dropdown. Click Edit to configure the connection string on the Connection Properties dialog box. If your SQL Server database server is installed on your local computer, type in localhost for the Server name and select the JProCo database from the Select or enter a database name dropdown. Click OK to dismiss the Connection Properties dialog box. Check Make this a shared data source and click Next. On the Design the Query screen, you can use the query builder to build a query if you wish. Since this post is not meant to teach you T-SQL queries, you will copy all queries from files that have been provided for you. In the C:\Joes2Pros\SSRSCompanionFiles\Chapter3\Resources folder open the sales by employee.sql file. Copy and paste the code from the file into the Query string Text Box. Click Next. On the Select the Report Type screen, choose Tabular and click Next. On the Design the Table screen, you have to figure out the groupings of the report. How do you do this? Well, you often need to know a bit about the data and report requirements. I often draw the report out on paper first to help me determine the groups. In the case of this report, I could group the data several ways. Do I want to see the data grouped by Year and Month? Do I want to see the data grouped by Employee or Category? The only thing I know for sure about this ahead of time is that the TotalSales goes in the Details section. Let’s assume that the CIO asked to see the data grouped first by Year and Month, then by Category. Let’s move the fields to the right-hand side. This is done by selecting Page > Group or Details >, as shown in, and click Next. On the Choose the Table Layout screen, select Stepped and check Include subtotals and Enable drilldown, as shown in. On the Choose the Style screen, choose any color scheme you wish (unlike the Model T) and click Next. I chose the default, Slate. On the Choose the Deployment Location screen, change the Deployment folder to Chapter 3 and click Next. At the Completing the Wizard screen, name your report Employee Sales and click Finish. After clicking Finish, the report and a shared data source will appear in the Solution Explorer and the report will also be visible in Design view. Click the Preview tab at the top. This report expects the user to supply a year which the report will then use as a filter. Type in a year between 2006 and 2013 and click View Report. Click the plus sign next to the Sales Year to expand the report to see the months, then expand again to see the categories and finally the details. You now have the assembly line report completed, and you probably already have some ideas on how to improve the report. Tomorrow’s Post Tomorrow’s blog post will show how to create your own data sources and data sets in SSRS. If you want to learn SSRS in easy to simple words – I strongly recommend you to get Beginning SSRS book from Joes 2 Pros. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL Tagged: Reporting Services, SSRS

  Read the article

• IIS 7.0 informational HTTP status codes

  - by Samir R. Bhogayta

  1xx - Informational These HTTP status codes indicate a provisional response. The client computer receives one or more 1xx responses before the client computer receives a regular response. IIS 7.0 uses the following informational HTTP status codes: 100 - Continue. 101 - Switching protocols. 2xx - Success These HTTP status codes indicate that the server successfully accepted the request. IIS 7.0 uses the following success HTTP status codes: 200 - OK. The client request has succeeded. 201 - Created. 202 - Accepted. 203 - Nonauthoritative information. 204 - No content. 205 - Reset content. 206 - Partial content. 3xx - Redirection These HTTP status codes indicate that the client browser must take more action to fulfill the request. For example, the client browser may have to request a different page on the server. Or, the client browser may have to repeat the request by using a proxy server. IIS 7.0 uses the following redirection HTTP status codes: 301 - Moved permanently. 302 - Object moved. 304 - Not modified. 307 - Temporary redirect. 4xx - Client error These HTTP status codes indicate that an error occurred and that the client browser appears to be at fault. For example, the client browser may have requested a page that does not exist. Or, the client browser may not have provided valid authentication information. IIS 7.0 uses the following client error HTTP status codes: 400 - Bad request. The request could not be understood by the server due to malformed syntax. The client should not repeat the request without modifications. IIS 7.0 defines the following HTTP status codes that indicate a more specific cause of a 400 error: 400.1 - Invalid Destination Header. 400.2 - Invalid Depth Header. 400.3 - Invalid If Header. 400.4 - Invalid Overwrite Header. 400.5 - Invalid Translate Header. 400.6 - Invalid Request Body. 400.7 - Invalid Content Length. 400.8 - Invalid Timeout. 400.9 - Invalid Lock Token. 401 - Access denied. IIS 7.0 defines several HTTP status codes that indicate a more specific cause of a 401 error. The following specific HTTP status codes are displayed in the client browser but are not displayed in the IIS log: 401.1 - Logon failed. 401.2 - Logon failed due to server configuration. 401.3 - Unauthorized due to ACL on resource. 401.4 - Authorization failed by filter. 401.5 - Authorization failed by ISAPI/CGI application. 403 - Forbidden. IIS 7.0 defines the following HTTP status codes that indicate a more specific cause of a 403 error: 403.1 - Execute access forbidden. 403.2 - Read access forbidden. 403.3 - Write access forbidden. 403.4 - SSL required. 403.5 - SSL 128 required. 403.6 - IP address rejected. 403.7 - Client certificate required. 403.8 - Site access denied. 403.9 - Forbidden: Too many clients are trying to connect to the Web server. 403.10 - Forbidden: Web server is configured to deny Execute access. 403.11 - Forbidden: Password has been changed. 403.12 - Mapper denied access. 403.13 - Client certificate revoked. 403.14 - Directory listing denied. 403.15 - Forbidden: Client access licenses have exceeded limits on the Web server. 403.16 - Client certificate is untrusted or invalid. 403.17 - Client certificate has expired or is not yet valid. 403.18 - Cannot execute requested URL in the current application pool. 403.19 - Cannot execute CGI applications for the client in this application pool. 403.20 - Forbidden: Passport logon failed. 403.21 - Forbidden: Source access denied. 403.22 - Forbidden: Infinite depth is denied. 404 - Not found. IIS 7.0 defines the following HTTP status codes that indicate a more specific cause of a 404 error: 404.0 - Not found. 404.1 - Site Not Found. 404.2 - ISAPI or CGI restriction. 404.3 - MIME type restriction. 404.4 - No handler configured. 404.5 - Denied by request filtering configuration. 404.6 - Verb denied. 404.7 - File extension denied. 404.8 - Hidden namespace. 404.9 - File attribute hidden. 404.10 - Request header too long. 404.11 - Request contains double escape sequence. 404.12 - Request contains high-bit characters. 404.13 - Content length too large. 404.14 - Request URL too long. 404.15 - Query string too long. 404.16 - DAV request sent to the static file handler. 404.17 - Dynamic content mapped to the static file handler via a wildcard MIME mapping. 404.18 - Querystring sequence denied. 404.19 - Denied by filtering rule. 405 - Method Not Allowed. 406 - Client browser does not accept the MIME type of the requested page. 408 - Request timed out. 412 - Precondition failed. 5xx - Server error These HTTP status codes indicate that the server cannot complete the request because the server encounters an error. IIS 7.0 uses the following server error HTTP status codes: 500 - Internal server error. IIS 7.0 defines the following HTTP status codes that indicate a more specific cause of a 500 error: 500.0 - Module or ISAPI error occurred. 500.11 - Application is shutting down on the Web server. 500.12 - Application is busy restarting on the Web server. 500.13 - Web server is too busy. 500.15 - Direct requests for Global.asax are not allowed. 500.19 - Configuration data is invalid. 500.21 - Module not recognized. 500.22 - An ASP.NET httpModules configuration does not apply in Managed Pipeline mode. 500.23 - An ASP.NET httpHandlers configuration does not apply in Managed Pipeline mode. 500.24 - An ASP.NET impersonation configuration does not apply in Managed Pipeline mode. 500.50 - A rewrite error occurred during RQ_BEGIN_REQUEST notification handling. A configuration or inbound rule execution error occurred. Note Here is where the distributed rules configuration is read for both inbound and outbound rules. 500.51 - A rewrite error occurred during GL_PRE_BEGIN_REQUEST notification handling. A global configuration or global rule execution error occurred. Note Here is where the global rules configuration is read. 500.52 - A rewrite error occurred during RQ_SEND_RESPONSE notification handling. An outbound rule execution occurred. 500.53 - A rewrite error occurred during RQ_RELEASE_REQUEST_STATE notification handling. An outbound rule execution error occurred. The rule is configured to be executed before the output user cache gets updated. 500.100 - Internal ASP error. 501 - Header values specify a configuration that is not implemented. 502 - Web server received an invalid response while acting as a gateway or proxy. IIS 7.0 defines the following HTTP status codes that indicate a more specific cause of a 502 error: 502.1 - CGI application timeout. 502.2 - Bad gateway. 503 - Service unavailable. IIS 7.0 defines the following HTTP status codes that indicate a more specific cause of a 503 error: 503.0 - Application pool unavailable. 503.2 - Concurrent request limit exceeded.

  Read the article

• Corsair Hackers Reboot

  It wasn't easy for me to attend but it was absolutely worth to go. The Linux User Group of Mauritius (LUGM) organised another get-together for any open source enthusiast here on the island. Strangely named "Corsair Hackers Reboot" but it stands for a positive cause: "Corsair Hackers Reboot Event A collaborative activity involving LUGM, UoM Computer Club, Fortune Way Shopping Mall and several geeks from around the island, striving to put FOSS into homes & offices. The public is invited to discover and explore Free Software & Open Source." And it was a good opportunity for me and the kids to visit the east coast of Mauritius, too. Perfect timing It couldn't have been better... Why? Well, for two important reasons (in terms of IT): End of support for Microsoft Windows XP - 08.04.2014 Release of Ubuntu 14.04 Long Term Support - 17.04.2014 Quite funnily, those two IT dates weren't the initial reasons and only during the weeks of preparations we put those together. And therefore it was even more positive to promote the use of Linux and open source software in general to a broader audience. Getting there ... Thanks to the new motor way M3 and all the additional road work which has been completed recently it was very simple to get across the island in a very quick and relaxed manner. Compared to my trips in the early days of living in Mauritius (and riding on a scooter) it was very smooth and within less than an hour we hit Centrale de Flacq. Well, being in the city doesn't necessarily mean that one has arrived at the destination. But thanks to modern technology I had a quick look on Google Maps, and we finally managed to get a parking behind the huge bus terminal in Flacq. From there it was just a short walk to Fortune Way. The children were trying to count the number of buses... Well, lots and lots of buses - really impressive actually. What was presented? There were different areas set up. Right at the entrance one's attention was directly drawn towards the elevated hacker's stage. Similar to rock stars performing their gig there was bunch of computers, laptops and networking equipment in order to cater the right working conditions for coding/programming challenge(s) on the one hand and for the pen-testing or system hacking competition on the other hand. Personally, I was very impresses that actually Nitin took care of the pen-testing competition. He hardly started one year back with Linux in general, and Kali Linux specifically. Seeing his personal development from absolute newbie to a decent Linux system administrator within such a short period of time, is really impressive. His passion to open source software made him a living. Next, clock-wise seen, was the Kid's Corner with face-painting as the main attraction. Additionally, there were numerous paper print outs to colour. Plus a decent workstation with the educational suite GCompris. Of course, my little ones were into that. They already know GCompris since a while as they are allowed to use it on an IGEL thin client terminal here at home. To simplify my life, I set up GCompris as full-screen guest session on the server, and they can pass the login screen without any further obstacles. And because it's a thin client hooked up to a XDMCP remote session I don't have to worry about the hardware on their desk, too. The next section was the main attraction of the event: BYOD - Bring Your Own Device Well, compared to the usual context of BYOD the corsairs had a completely different intention. Here, you could bring your own laptop and a team of knowledgeable experts - read: geeks and so on - offered to fully convert your system on any Linux distribution of your choice. And even though I came later, I was told that the USB pen drives had been in permanent use. From being prepared via dd command over launching LiveCD session to finally installing a fresh Linux system on bare metal. Most interestingly, I did a similar job already a couple of months ago, while upgrading an existing Windows XP system to Xubuntu 13.10. So far, the female owner is very happy and enjoys her system almost every evening to go shopping online, checking mails, and reading latest news from the Anime world. Back to the Hackers event, Ish told me that they managed approximately 20 conversion during the day. Furthermore, Ajay and others gladly assisted some visitors with some tricky issues and by the end of the day you can call is a success. While I was around, there was a elderly male visitor that got a full-fledged system conversion to a Linux system running completely in French language. A little bit more to the centre it was Yasir's turn to demonstrate his Arduino hardware that he hooked up with an experimental electrical circuit board connected to an LCD matrix display. That's the real spirit of hacking, and he showed some minor adjustments on the fly while demo'ing the system. Also, very interesting there was a thermal sensor around. Personally, I think that platforms like the Arduino as well as the Raspberry Pi have a great potential at a very affordable price in order to bring a better understanding of electronics as well as computer programming to a broader audience. It would be great to see more of those experiments during future activities. And last but not least there were a small number of vendors. Amongst them was Emtel - once again as sponsor of the general internet connectivity - and another hardware supplier from Riche Terre shopping mall. They had a good collection of Android related gimmicks, like a autonomous web cam that can convert any TV with HDMI connector into an online video chat system given WiFi. It's actually kind of awesome to have a Skype or Google hangout video session on the big screen rather than on the laptop. Some pictures of the event LUGM: Great conversations on Linux, open source and free software during the Corsair Hackers Reboot LUGM: Educational workstation running GCompris suite attracted the youngest attendees of the day. Of course, face painting had to be done prior to hacking... LUGM: Nadim demoing some Linux specifics to interested visitors. Everyone was pretty busy during the whole day LUGM: The hacking competition, here pen-testing a wireless connection and access point between multiple machines LUGM: Well prepared workstations to be able to 'upgrade' visitors' machines to any Linux operating system Final thoughts Gratefully, during the preparations of the event I was invited to leave some comments or suggestions, and the team of the LUGM did a great job. The outdoor banner was a eye-catcher, the various flyers and posters for the event were clearly written and as far as I understood from the quick chats I had with Ish, Nadim, Nitin, Ajay, and of course others all were very happy about the event execution. Great job, LUGM! And I'm already looking forward to the next Corsair Hackers Reboot event ... Crossing fingers: Very soon and hopefully this year again :) Update: In the media The event had been announced in local media, too. L'Express: Salon informatique: Hacking Challenge à Flacq

  Read the article

• Lenovo V570 CPU fan running constantly, CPU core 1 running over 90%!

  - by Rabbit2190

  I have seen that a lot of people are having this same issue. I am running a Lenovo V570 i5 4 core, 6 gigs of ram, and am running 11.10 Onieric Ocelot. On my system monitor graph it shows CPU at 20%, when I open the monitor it shows core #1 at around 90%, the other cores fluctuate at or below 5-12% if even. Now this seems like a really terrible balance of power between the cores, especially with so much stress on one core only, when these things are designed to work with 4 cores and not at such high temps. My current readings say 64 degrees Celsius, this does not seem normal for any cpu, and I am seriously considering, working on my windows7 partition until I see a real solution to this issue or upgrading to 12.04 right away when it comes out... I have seen countless things saying it has something to do with the Kernel, the kernel on mine is the same as when I upgraded, I really do not like messing with it, as when I had 11.04, I did tinker with it due to the freeze issues I was having, and that just made worse issues. I like this version 11.10 and would like to keep it for a while, but without the fear that my core is going to fry! So any help would be much appreciated! I did try changing a couple things in ACPI, and restarting this did not help, and here I am. I tried one thing prior to that that was listed under a different computer brand, but it would not do a make on the file. I really need help with this, I rely on this computer for a lot of things, and love this OS! Please help so I do not need to resort to my Microsoft partition! PLEASE! Here is the fwts cpufrequ- output: rabbit@rabbit-Lenovo-V570:~$ sudo fwts cpufreq - 00001 fwts Results generated by fwts: Version V0.23.25 (Thu Oct 6 15 00002 fwts :12:31 BST 2011). 00003 fwts 00004 fwts Some of this work - Copyright (c) 1999 - 2010, Intel Corp. 00005 fwts All rights reserved. 00006 fwts Some of this work - Copyright (c) 2010 - 2011, Canonical. 00007 fwts 00008 fwts This test run on 02/04/12 at 17:23:22 on host Linux 00009 fwts rabbit-Lenovo-V570 3.0.0-17-generic-pae #30-Ubuntu SMP Thu 00010 fwts Mar 8 17:53:35 UTC 2012 i686. 00011 fwts 00012 fwts Running tests: cpufreq. 00014 cpufreq CPU frequency scaling tests (takes ~1-2 mins). 00015 cpufreq --------------------------------------------------------- 00016 cpufreq Test 1 of 1: CPU P-State Checks. 00017 cpufreq For each processor in the system, this test steps through 00018 cpufreq the various frequency states (P-states) that the BIOS 00019 cpufreq advertises for the processor. For each processor/frequency 00020 cpufreq combination, a quick performance value is measured. The 00021 cpufreq test then validates that: 00022 cpufreq 1) Each processor has the same number of frequency states 00023 cpufreq 2) Higher advertised frequencies have a higher performance 00024 cpufreq 3) No duplicate frequency values are reported by the BIOS 00025 cpufreq 4) Is BIOS wrongly doing Sw_All P-state coordination across cores 00026 cpufreq 5) Is BIOS wrongly doing Sw_Any P-state coordination across cores 00027 cpufreq Frequency | Speed 00028 cpufreq -----------+--------- 00029 cpufreq 2.45 Ghz | 100.0 % 00030 cpufreq 2.45 Ghz | 83.7 % 00031 cpufreq 2.05 Ghz | 69.2 % 00032 cpufreq 1.85 Ghz | 62.5 % 00033 cpufreq 1.65 Ghz | 55.2 % 00034 cpufreq 1400 Mhz | 48.6 % 00035 cpufreq 1200 Mhz | 41.8 % 00036 cpufreq 1000 Mhz | 34.5 % 00037 cpufreq 800 Mhz | 27.6 % 00038 cpufreq 9 CPU frequency steps supported 00039 cpufreq Frequency | Speed 00040 cpufreq -----------+--------- 00041 cpufreq 2.45 Ghz | 97.7 % 00042 cpufreq 2.45 Ghz | 83.7 % 00043 cpufreq 2.05 Ghz | 69.6 % 00044 cpufreq 1.85 Ghz | 63.3 % 00045 cpufreq 1.65 Ghz | 55.7 % 00046 cpufreq 1400 Mhz | 48.7 % 00047 cpufreq 1200 Mhz | 41.7 % 00048 cpufreq 1000 Mhz | 34.5 % 00049 cpufreq 800 Mhz | 27.5 % 00050 cpufreq Frequency | Speed 00051 cpufreq -----------+--------- 00052 cpufreq 2.45 Ghz | 97.7 % 00053 cpufreq 2.45 Ghz | 84.4 % 00054 cpufreq 2.05 Ghz | 69.6 % 00055 cpufreq 1.85 Ghz | 62.6 % 00056 cpufreq 1.65 Ghz | 55.9 % 00057 cpufreq 1400 Mhz | 48.7 % 00058 cpufreq 1200 Mhz | 41.7 % 00059 cpufreq 1000 Mhz | 34.7 % 00060 cpufreq 800 Mhz | 27.8 % 00061 cpufreq Frequency | Speed 00062 cpufreq -----------+--------- 00063 cpufreq 2.45 Ghz | 100.0 % 00064 cpufreq 2.45 Ghz | 82.6 % 00065 cpufreq 2.05 Ghz | 67.8 % 00066 cpufreq 1.85 Ghz | 61.4 % 00067 cpufreq 1.65 Ghz | 54.9 % 00068 cpufreq 1400 Mhz | 48.3 % 00069 cpufreq 1200 Mhz | 41.1 % 00070 cpufreq 1000 Mhz | 34.3 % 00071 cpufreq 800 Mhz | 27.4 % 00072 cpufreq Frequency | Speed 00073 cpufreq -----------+--------- 00074 cpufreq 2.45 Ghz | 96.2 % 00075 cpufreq 2.45 Ghz | 82.5 % 00076 cpufreq 2.05 Ghz | 69.3 % 00077 cpufreq 1.85 Ghz | 62.7 % 00078 cpufreq 1.65 Ghz | 55.0 % 00079 cpufreq 1400 Mhz | 47.4 % 00080 cpufreq 1200 Mhz | 41.1 % 00081 cpufreq 1000 Mhz | 34.0 % 00082 cpufreq 800 Mhz | 27.2 % 00083 cpufreq Frequency | Speed 00084 cpufreq -----------+--------- 00085 cpufreq 2.45 Ghz | 96.5 % 00086 cpufreq 2.45 Ghz | 83.6 % 00087 cpufreq 2.05 Ghz | 68.1 % 00088 cpufreq 1.85 Ghz | 61.7 % 00089 cpufreq 1.65 Ghz | 54.9 % 00090 cpufreq 1400 Mhz | 48.0 % 00091 cpufreq 1200 Mhz | 41.1 % 00092 cpufreq 1000 Mhz | 34.2 % 00093 cpufreq 800 Mhz | 27.8 % 00094 cpufreq Frequency | Speed 00095 cpufreq -----------+--------- 00096 cpufreq 2.45 Ghz | 96.4 % 00097 cpufreq 2.45 Ghz | 82.6 % 00098 cpufreq 2.05 Ghz | 68.8 % 00099 cpufreq 1.85 Ghz | 60.5 % 00100 cpufreq 1.65 Ghz | 52.4 % 00101 cpufreq 1400 Mhz | 48.8 % 00102 cpufreq 1200 Mhz | 41.1 % 00103 cpufreq 1000 Mhz | 34.2 % 00104 cpufreq 800 Mhz | 26.4 % 00105 cpufreq Frequency | Speed 00106 cpufreq -----------+--------- 00107 cpufreq 2.45 Ghz | 95.3 % 00108 cpufreq 2.45 Ghz | 82.5 % 00109 cpufreq 2.05 Ghz | 65.5 % 00110 cpufreq 1.85 Ghz | 62.8 % 00111 cpufreq 1.65 Ghz | 54.8 % 00112 cpufreq 1400 Mhz | 48.0 % 00113 cpufreq 1200 Mhz | 41.2 % 00114 cpufreq 1000 Mhz | 34.2 % 00115 cpufreq 800 Mhz | 27.3 % 00116 cpufreq Frequency | Speed 00117 cpufreq -----------+--------- 00118 cpufreq 2.45 Ghz | 96.3 % 00119 cpufreq 2.45 Ghz | 83.4 % 00120 cpufreq 2.05 Ghz | 68.3 % 00121 cpufreq 1.85 Ghz | 61.9 % 00122 cpufreq 1.65 Ghz | 54.9 % 00123 cpufreq 1400 Mhz | 48.0 % 00124 cpufreq 1200 Mhz | 41.1 % 00125 cpufreq 1000 Mhz | 34.2 % 00126 cpufreq 800 Mhz | 27.3 % 00127 cpufreq Frequency | Speed 00128 cpufreq -----------+--------- 00129 cpufreq 2.45 Ghz | 100.0 % 00130 cpufreq 2.45 Ghz | 77.9 % 00131 cpufreq 2.05 Ghz | 64.6 % 00132 cpufreq 1.85 Ghz | 54.0 % 00133 cpufreq 1.65 Ghz | 51.7 % 00134 cpufreq 1400 Mhz | 45.2 % 00135 cpufreq 1200 Mhz | 39.0 % 00136 cpufreq 1000 Mhz | 33.1 % 00137 cpufreq 800 Mhz | 25.5 % 00138 cpufreq Frequency | Speed 00139 cpufreq -----------+--------- 00140 cpufreq 2.45 Ghz | 93.4 % 00141 cpufreq 2.45 Ghz | 75.7 % 00142 cpufreq 2.05 Ghz | 64.5 % 00143 cpufreq 1.85 Ghz | 59.1 % 00144 cpufreq 1.65 Ghz | 51.4 % 00145 cpufreq 1400 Mhz | 45.9 % 00146 cpufreq 1200 Mhz | 39.3 % 00147 cpufreq 1000 Mhz | 32.7 % 00148 cpufreq 800 Mhz | 25.8 % 00149 cpufreq Frequency | Speed 00150 cpufreq -----------+--------- 00151 cpufreq 2.45 Ghz | 92.1 % 00152 cpufreq 2.45 Ghz | 78.1 % 00153 cpufreq 2.05 Ghz | 65.7 % 00154 cpufreq 1.85 Ghz | 58.6 % 00155 cpufreq 1.65 Ghz | 52.5 % 00156 cpufreq 1400 Mhz | 45.7 % 00157 cpufreq 1200 Mhz | 39.3 % 00158 cpufreq 1000 Mhz | 32.7 % 00159 cpufreq 800 Mhz | 24.3 % 00160 cpufreq Frequency | Speed 00161 cpufreq -----------+--------- 00162 cpufreq 2.45 Ghz | 88.9 % 00163 cpufreq 2.45 Ghz | 79.8 % 00164 cpufreq 2.05 Ghz | 58.4 % 00165 cpufreq 1.85 Ghz | 52.6 % 00166 cpufreq 1.65 Ghz | 46.9 % 00167 cpufreq 1400 Mhz | 41.0 % 00168 cpufreq 1200 Mhz | 35.1 % 00169 cpufreq 1000 Mhz | 29.1 % 00170 cpufreq 800 Mhz | 22.9 % 00171 cpufreq Frequency | Speed 00172 cpufreq -----------+--------- 00173 cpufreq 2.45 Ghz | 92.8 % 00174 cpufreq 2.45 Ghz | 80.1 % 00175 cpufreq 2.05 Ghz | 66.2 % 00176 cpufreq 1.85 Ghz | 59.5 % 00177 cpufreq 1.65 Ghz | 52.9 % 00178 cpufreq 1400 Mhz | 46.2 % 00179 cpufreq 1200 Mhz | 39.5 % 00180 cpufreq 1000 Mhz | 32.9 % 00181 cpufreq 800 Mhz | 26.3 % 00182 cpufreq Frequency | Speed 00183 cpufreq -----------+--------- 00184 cpufreq 2.45 Ghz | 92.9 % 00185 cpufreq 2.45 Ghz | 79.5 % 00186 cpufreq 2.05 Ghz | 66.2 % 00187 cpufreq 1.85 Ghz | 59.6 % 00188 cpufreq 1.65 Ghz | 52.9 % 00189 cpufreq 1400 Mhz | 46.7 % 00190 cpufreq 1200 Mhz | 39.6 % 00191 cpufreq 1000 Mhz | 32.9 % 00192 cpufreq 800 Mhz | 26.3 % 00193 cpufreq FAILED [MEDIUM] CPUFreqCPUsSetToSW_ANY: Test 1, Processors 00194 cpufreq are set to SW_ANY. 00195 cpufreq FAILED [MEDIUM] CPUFreqSW_ANY: Test 1, Firmware not 00196 cpufreq implementing hardware coordination cleanly. Firmware using 00197 cpufreq SW_ANY instead?. 00198 cpufreq 00199 cpufreq ========================================================= 00200 cpufreq 0 passed, 2 failed, 0 warnings, 0 aborted, 0 skipped, 0 00201 cpufreq info only. 00202 cpufreq ========================================================= 00204 summary 00205 summary 0 passed, 2 failed, 0 warnings, 0 aborted, 0 skipped, 0 00206 summary info only. 00207 summary 00208 summary Test Failure Summary 00209 summary ==================== 00210 summary 00211 summary Critical failures: NONE 00212 summary 00213 summary High failures: NONE 00214 summary 00215 summary Medium failures: 2 00216 summary cpufreq test, at 1 log line: 193 00217 summary "Processors are set to SW_ANY." 00218 summary cpufreq test, at 1 log line: 195 00219 summary "Firmware not implementing hardware coordination cleanly. Firmware using SW_ANY instead?." 00220 summary 00221 summary Low failures: NONE 00222 summary 00223 summary Other failures: NONE 00224 summary 00225 summary Test |Pass |Fail |Abort|Warn |Skip |Info | 00226 summary ---------------+-----+-----+-----+-----+-----+-----+ 00227 summary cpufreq | | 2| | | | | 00228 summary ---------------+-----+-----+-----+-----+-----+-----+ 00229 summary Total: | 0| 2| 0| 0| 0| 0| 00230 summary ---------------+-----+-----+-----+-----+-----+-----+ rabbit@rabbit-Lenovo-V570:~$

  Read the article

• Kubuntu 12.04 - Touchpad and keyboard stopped working at random

  - by StepTNT

  As in the title, I've got this problem with my Kubuntu 12.04. At first I've thought that the whole system was hung, but it happened again 5 minutes ago and, while the keyboard and the touchpad stopped working, the music was still playing, so I guess that's just an "input" problem, because the system was still working! Any solution? Is there some data that you need to know about my setup? EDIT: Added my lshw outout description: Notebook product: N53SV () vendor: ASUSTeK Computer Inc. version: 1.0 serial: B2N0AS17695408A width: 64 bits capabilities: smbios-2.6 dmi-2.6 vsyscall32 configuration: boot=normal chassis=notebook family=N uuid=8083F2DA-A43E-E081-3F3F-BCAEC55F8AA1 *-core description: Motherboard product: N53SV vendor: ASUSTeK Computer Inc. physical id: 0 version: 1.0 serial: BSN12345678901234567 slot: MIDDLE *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: N53SV.214 date: 08/10/2011 size: 64KiB capacity: 2496KiB capabilities: pci upgrade shadowing cdboot bootselect edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer acpi usb smartbattery biosbootspecification *-cpu description: CPU product: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz serial: To Be Filled By O.E.M. slot: CPU 1 size: 800MHz capacity: 4GHz width: 64 bits clock: 100MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer xsave avx lahf_lm ida arat epb xsaveopt pln pts tpr_shadow vnmi flexpriority ept vpid cpufreq configuration: cores=4 enabledcores=1 threads=2 *-cache description: L1 cache physical id: 5 slot: L1-Cache size: 32KiB capacity: 32KiB capabilities: internal write-back instruction *-memory description: System Memory physical id: 40 slot: System board or motherboard size: 10GiB *-bank:0 description: SODIMM DDR3 Synchronous 1333 MHz (0,8 ns) product: 99U5428-040.A00LF vendor: Kingston physical id: 0 serial: 103C28C3 slot: ChannelA-DIMM0 size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: SODIMM DDR3 Synchronous 1333 MHz (0,8 ns) product: HMT325S6BFR8C-H9 vendor: Hynix/Hyundai physical id: 1 serial: 58383D1F slot: ChannelA-DIMM1 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:2 description: SODIMM DDR3 Synchronous 1333 MHz (0,8 ns) product: HMT325S6BFR8C-H9 vendor: Hynix/Hyundai physical id: 2 serial: 58183D19 slot: ChannelB-DIMM0 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:3 description: SODIMM DDR3 Synchronous 1333 MHz (0,8 ns) product: HMT325S6BFR8C-H9 vendor: Hynix/Hyundai physical id: 3 serial: 58183C8F slot: ChannelB-DIMM1 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-pci description: Host bridge product: 2nd Generation Core Processor Family DRAM Controller vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 09 width: 32 bits clock: 33MHz configuration: driver=agpgart-intel resources: irq:0 *-pci:0 description: PCI bridge product: Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port vendor: Intel Corporation physical id: 1 bus info: pci@0000:00:01.0 version: 09 width: 32 bits clock: 33MHz capabilities: pci pm msi pciexpress normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:d000(size=4096) memory:db000000-dc0fffff ioport:c0000000(size=301989888) *-generic UNCLAIMED description: Unassigned class product: Illegal Vendor ID vendor: Illegal Vendor ID physical id: 0 bus info: pci@0000:01:00.0 version: ff width: 32 bits clock: 66MHz capabilities: bus_master vga_palette cap_list configuration: latency=255 maxlatency=255 mingnt=255 resources: memory:db000000-dbffffff memory:c0000000-cfffffff memory:d0000000-d1ffffff ioport:d000(size=128) memory:dc000000-dc07ffff *-display description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:47 memory:dc400000-dc7fffff memory:b0000000-bfffffff ioport:e000(size=64) *-communication description: Communication controller product: 6 Series/C200 Series Chipset Family MEI Controller #1 vendor: Intel Corporation physical id: 16 bus info: pci@0000:00:16.0 version: 04 width: 64 bits clock: 33MHz capabilities: pm msi bus_master cap_list configuration: driver=mei latency=0 resources: irq:48 memory:df00b000-df00b00f *-usb:0 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 vendor: Intel Corporation physical id: 1a bus info: pci@0000:00:1a.0 version: 05 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:16 memory:df008000-df0083ff *-multimedia description: Audio device product: 6 Series/C200 Series Chipset Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 05 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:49 memory:df000000-df003fff *-pci:1 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:41 ioport:c000(size=4096) memory:de600000-deffffff ioport:d4200000(size=10485760) *-pci:2 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:42 ioport:b000(size=4096) memory:ddc00000-de5fffff ioport:d3700000(size=10485760) *-network description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 01 serial: 48:5d:60:f2:2c:fd width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-24-generic firmware=N/A ip=192.168.1.6 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:ddc00000-ddc0ffff *-pci:3 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 4 vendor: Intel Corporation physical id: 1c.3 bus info: pci@0000:00:1c.3 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:43 ioport:a000(size=4096) memory:dd200000-ddbfffff ioport:d2c00000(size=10485760) *-usb description: USB controller product: FL1000G USB 3.0 Host Controller vendor: Fresco Logic physical id: 0 bus info: pci@0000:04:00.0 version: 04 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress xhci bus_master cap_list configuration: driver=xhci_hcd latency=0 resources: irq:19 memory:dd200000-dd20ffff *-pci:4 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 6 vendor: Intel Corporation physical id: 1c.5 bus info: pci@0000:00:1c.5 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:44 ioport:9000(size=4096) memory:dc800000-dd1fffff ioport:d2100000(size=10485760) *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 06 serial: bc:ae:c5:5f:8a:a1 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl_nic/rtl8168e-2.fw latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:46 ioport:9000(size=256) memory:d2104000-d2104fff memory:d2100000-d2103fff *-usb:1 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 05 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:df007000-df0073ff *-isa description: ISA bridge product: HM65 Express Chipset Family LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 05 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: SATA controller product: 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 logical name: scsi2 version: 05 width: 32 bits clock: 66MHz capabilities: storage msi pm ahci_1.0 bus_master cap_list emulated configuration: driver=ahci latency=0 resources: irq:45 ioport:e0b0(size=8) ioport:e0a0(size=4) ioport:e090(size=8) ioport:e080(size=4) ioport:e060(size=32) memory:df006000-df0067ff *-disk description: ATA Disk product: ST9750420AS vendor: Seagate physical id: 0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 0002 serial: 5WS0A7QR size: 698GiB (750GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=e0c5913d *-volume:0 description: Windows FAT volume vendor: MSDOS5.0 physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 version: FAT32 serial: 4ce5-3acb size: 3004MiB capacity: 3004MiB capabilities: primary fat initialized configuration: FATs=2 filesystem=fat *-volume:1 description: EXT4 volume vendor: Linux physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 logical name: / version: 1.0 serial: c198cc2a-d86a-4460-a4d5-3fc0b21e439c size: 28GiB capacity: 28GiB capabilities: primary journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2012-03-15 16:53:54 filesystem=ext4 lastmountpoint=/ modified=2012-05-02 18:52:04 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,user_xattr,acl,barrier=1,data=ordered mounted=2012-05-09 19:06:01 state=mounted *-volume:2 description: Windows NTFS volume physical id: 3 bus info: scsi@0:0.0.0,3 logical name: /dev/sda3 version: 3.1 serial: 4c1cdebc-ec09-2947-a3b5-c1f9f1cddc1c size: 152GiB capacity: 152GiB capabilities: primary bootable ntfs initialized configuration: clustersize=4096 created=2011-02-22 16:02:47 filesystem=ntfs label=OS state=clean *-volume:3 description: Extended partition physical id: 4 bus info: scsi@0:0.0.0,4 logical name: /dev/sda4 size: 514GiB capacity: 514GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume:0 description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 10GiB capabilities: nofs *-logicalvolume:1 description: HPFS/NTFS partition physical id: 6 logical name: /dev/sda6 capacity: 504GiB *-cdrom description: DVD-RAM writer product: BD-MLT UJ240AS vendor: MATSHITA physical id: 1 bus info: scsi@2:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/sr0 version: 1.00 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-serial UNCLAIMED description: SMBus product: 6 Series/C200 Series Chipset Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 05 width: 64 bits clock: 33MHz configuration: latency=0 resources: memory:df005000-df0050ff ioport:e040(size=32)

  Read the article

• First PC Build (Part 1)

  - by Anthony Trudeau

  Originally posted on: http://geekswithblogs.net/tonyt/archive/2014/08/05/157959.aspxA couple of months ago I made the decision to build myself a new computer. The intended use is gaming and for using the last real version of Photoshop. I was motivated by the poor state of console gaming and a simple desire to do something I haven’t done before – build a PC from the ground up. I’ve been using PCs for more than two decades. I’ve replaced a component hear and there, but for the last 10 years or so I’ve only used laptops. Therefore, this article will be written from the perspective of someone familiar with PCs, but completely new at building. I’m not an expert and this is not a definitive guide for building a PC, but I do hope that it encourages you to try it yourself. Component List Research There was a lot of research necessary, because building a PC is completely new to me, and I haven’t kept up with what’s out there. The first thing you want to do is nail down what your goals are. Your goals are going to be driven by what you want to do with your computer and personal choice. Don’t neglect the second one, because if you’re doing this for fun you want to get what you want. In my case, I focused on three things: performance, longevity, and aesthetics. The performance aspect is important for gaming and Photoshop. This will drive what components you get. For example, heavy gaming use is going to drive your choice of graphics card. Longevity is relevant to me, because I don’t want to be changing things out anytime soon for the next hot game. The consequence of performance and longevity is cost. Finally, aesthetics was my next consideration. I could have just built a box, but it wouldn’t have been nearly as fun for me. Aesthetics might not be important to you. They are for me. I also like gadgets and that played into at least one purchase for this build. I used PC Part Picker to put together my component list. I found it invaluable during the process and I’d recommend it to everyone. One caveat is that I wouldn’t trust the compatibility aspects. It does a pretty good job of not steering you wrong, but do your own research. The rest of it isn’t really sexy. I started out with what appealed to me and then I made changes and additions as I dived deep into researching each component and interaction I could find. The resources I used are innumerable. I used reviews, product descriptions, forum posts (praises and problems), et al. to assist me. I also asked friends into gaming what they thought about my component list. And when I got near the end I posted my list to the Reddit /r/buildapc forum. I cannot stress the value of extra sets of eyeballs and first hand experiences. Some of the resources I used: PC Part Picker Tom’s Hardware bit-tech Reddit Purchase PC Part Picker favors certain vendors. You should look at others too. In my case I found their favorites to be the best. My priorities were out-the-door price and shipping time. I knew that once I started getting parts I’d want to start building. Luckily, I timed it well and everything arrived within the span of a few days. Here are my opinions on the vendors I ended up using in alphabetical order. Amazon.com is a good, reliable choice. They have excellent customer service in my experience, and I knew I wouldn’t have trouble with them. However, shipping time is often a problem when you use their free shipping unless you order expensive items (I’ve found items over $100 ship quickly). Ultimately though, price wasn’t always the best and their collection of sales tax in my state turned me off them. I did purchase my case from them. I ordered the mouse as well, but I cancelled after it was stuck four days in a “shipping soon” state. I purchased the mouse locally. Best Buy is not my favorite place to do business. There’s a lot of history with poor, uninterested sales representatives and they used to have a lot of bad anti-consumer policies. That’s a lot better now, but the bad taste is still in my mouth. I ended up purchasing the accessories from them including mouse (locally) and headphones. NCIX is a company that I’ve never heard of before. It popped up as a recommendation for my CPU cooler on PC Part Picker. I didn’t do a lot of research on the company, because their policy on you buying insurance for your orders turned me off. That policy makes it clear to me that the company finds me responsible for the shipment once it leaves their dock. That’s not right, and may run afoul of state laws. Regardless they shipped my CPU cooler quickly and I didn’t have a problem. NewEgg.com is a well known company. I had never done business with them, but I’m glad I did. They shipped quickly and provided good visibility over everything. The prices were also the best in most cases. My main complaint is that they have a lot of exchange only return policies on components. To their credit those policies are listed in the cart underneath each item. The visibility tells me that they’re not playing any shenanigans and made me comfortable dealing with that risk. The vast majority of what I ordered came from them. Coming Next In the next part I’ll tackle my build experience.

  Read the article

• Advice for a distracted, unhappy, recently graduated programmer? [closed]

  - by Re-Invent

  I graduated 4 months ago. I had offers from a few good places to work at. At the same time I wanted to stick to building a small software business of my own, still have some ideas with good potential, some half done projects frozen in my github. But due to social pressures, I chose a job, the pay is great, but I am half-passionate about it. A small team of smart folks building useful product, working out contracts across the world. I've started finding it extremely boring. Boring to the extent that I skip 2-3 days a week together not doing work. Neither do I spend that time progressing any of my own projects. Yes, I feel stupid at the way I'm wasting time, but I don't understand exactly why is it happening. It's as if all the excitement has been drained. What can I do about it? Long version: School - I was in third standard. Only students, 6th grade had access to computer labs. I once peeked into the lab from the little door opening. No hard-disks, MS DOS on 5 1/2 inch floppies. I asked a senior student to play some sound in BASIC. He used PLAY to compose a tune. Boy! I was so excited, I was jumping from within. Back home, asked my brother to teach me some programming. We bought a book "MODERN All About GW-BASIC for Schools & Colleges". The book had everything, right from printing, to taking input, file i/o, game programming, machine level support, etc. I was in 6th standard, wrote my first game - a wheel of fortune, rotated the wheel by manipulating 16 color palette's definition. Got internet soon, got hooked to QuickBasic programming community. Made some more games "007 in Danger", "Car Crush 2" for submission to allbasiccode archives. I was extremely excited about all this. My interests now swayed into "hacking" (computer security). Taught myself some perl, found it annoying, learnt PHP and a bit of SQL. Also taught myself Visual Basic one of the winters and wrote a pacman clone with Direct X. By the time I was in 10th standard, I created some evil tools using visual basic, php and mysql and eventually landed myself into an unpaid side-job at a government facility, building evil tools for them. It was a dream come true for crackers of that time. And so was I, still very excited. Things changed soon, last two years of school were not so great as I was balancing preps for college, work at govt. and studies for school at same time. College - College was opposite of all I had wished it to be. I imagined it to be a place where I'd spend my 4 years building something awesome. It was rather an epitome of rote learning, attendance, rules, busy schedules, ban on personal laptops, hardly any hackers surrounding you and shit like that. We had to take permissions to even introduce some cultural/creative activities in our annual schedule. The labs won't be open on weekends because the lab employees had to have their leaves. Yes, a horrible place for someone like me. I still managed to pull out a project with a friend over 2 months. Showed it to people high in the academia hierarchy. They were immensely impressed, we proposed to allow personal computers for students. They made up half-assed reasons and didn't agree. We felt frustrated. And so on, I still managed to teach myself new languages, do new projects of my own, do an intern at the same govt. facility, start a small business for sometime, give a talk at a conference I'm passionate about, win game-dev and hacking contest at most respected colleges, solve good deal of programming contest problems, etc. At the same time I was not content with all these restrictions, great emphasis on rote learning, and sheer wastage of time due to college. I never felt I was overdoing, but now I feel I burnt myself out. During my last days at college, I did an intern at a bigco. While I spent my time building prototypes for certain LBS, the other interns around me, even a good friend, was just skipping time. I thought maybe, in a few weeks he would put in some serious efforts at work assigned to him, but all he did was to find creative ways to skip work, hide his face from manager, engage people in talks if they try to question his progress, etc. I tried a few time to get him on track, but it seems all he wanted was to "not to work hard at all and still reap the fruits". I don't know how others take such people, but I find their vicinity very very poisonous to one's own motivation and productivity. Over that, the place where I come from, HRs don't give much value to what have you done past 4 years. So towards the end of out intern, we all were offered work at the bigco, but the slacker, even after not writing more than 200 lines of code was made a much better offer. I felt enraged instantly - "Is this how the corp world treats someone who does fruitful, if not extra-ordinary work form them for past 6 months?". Yes, I did try to negotiate and debate. The bigcos seem blind due to departmentalization of responsibilities and many layers of management. I decided not to be in touch with any characters of that depressing play. Probably the busy time I had at college, ignoring friends, ignoring fun and squeezing every bit of free time for myself is also responsible. Probably this is what has drained all my willingness to work for anyone. I find my day job boring, at the same time I with to maintain it for financial reasons. I feel a bit burnt out, unsatisfied and at the same time an urge to quit working for someone else and start finishing my frozen side-projects (which may be profitable). Though I haven't got much to support myself with food, office, internet bills, etc in savings. I still have my day job, but I don't find it very interesting, even though the pay is higher than the slacker, I don't find money to be a great motivator here. I keep comparing myself to my past version. I wonder how to get rid of this and reboot myself back to the way I was in school days - excited about it, tinkering, building, learning new things daily, and NOT BORED?

  Read the article

• What's the best/most efficent way to create a semi-intelligent AI for a tic tac toe game?

  - by Link

  basically I am attempting to make a a efficient/smallish C game of Tic-Tac-Toe. I have implemented everything other then the AI for the computer so far. my squares are basically structs in an array with an assigned value based on the square. For example s[1].value = 1; therefore it's a x, and then a value of 3 would be a o. My question is whats the best way to create a semi-decent game playing AI for my tic-tac-toe game? I don't really want to use minimax, since It's not what I need. So how do I avoid a a lot of if statments and make it more efficient. Here is the rest of my code: #include <stdio.h> #include <stdlib.h> #include <string.h> #include <time.h> struct state{ // defined int state; // 0 is tie, 1 is user loss, 2 is user win, 3 is ongoing game int moves; }; struct square{ // one square of the board int value; // 1 is x, 3 is o char sign; // no space used }; struct square s[9]; //set up the struct struct state gamestate = {0,0}; //nothing void setUpGame(){ // setup the game int i = 0; for(i = 0; i < 9; i++){ s[i].value = 0; s[i].sign = ' '; } gamestate.moves=0; printf("\nHi user! You're \"x\"! I'm \"o\"! Good Luck :)\n"); } void displayBoard(){// displays the game board printf("\n %c | %c | %c\n", s[6].sign, s[7].sign, s[8].sign); printf("-----------\n"); printf(" %c | %c | %c\n", s[3].sign, s[4].sign, s[5].sign); printf("-----------\n"); printf(" %c | %c | %c\n\n", s[0].sign, s[1].sign, s[2].sign); } void getHumanMove(){ // get move from human int i; while(1){ printf(">>:"); char line[255]; // input the move to play fgets(line, sizeof(line), stdin); while(sscanf(line, "%d", &i) != 1) { //1 match of defined specifier on input line printf("Sorry, that's not a valid move!\n"); fgets(line, sizeof(line), stdin); } if(s[i-1].value != 0){printf("Sorry, That moves already been taken!\n\n");continue;} break; } s[i-1].value = 1; s[i-1].sign = 'x'; gamestate.moves++; } int sum(int x, int y, int z){return(x*y*z);} void getCompMove(){ // get the move from the computer } void checkWinner(){ // check the winner int i; for(i = 6; i < 9; i++){ // check cols if((sum(s[i].value,s[i-3].value,s[i-6].value)) == 8){printf("The Winner is o!\n");gamestate.state=1;} if((sum(s[i].value,s[i-3].value,s[i-6].value)) == 1){printf("The Winner is x!\n");gamestate.state=2;} } for(i = 0; i < 7; i+=3){ // check rows if((sum(s[i].value,s[i+1].value,s[i+2].value)) == 8){printf("The Winner is o!\n");gamestate.state=1;} if((sum(s[i].value,s[i+1].value,s[i+2].value)) == 1){printf("The Winner is x!\n");gamestate.state=2;} } if((sum(s[0].value,s[4].value,s[8].value)) == 8){printf("The Winner is o!\n");gamestate.state=1;} if((sum(s[0].value,s[4].value,s[8].value)) == 1){printf("The Winner is x!\n");gamestate.state=2;} if((sum(s[2].value,s[4].value,s[6].value)) == 8){printf("The Winner is o!\n");gamestate.state=1;} if((sum(s[2].value,s[4].value,s[6].value)) == 1){printf("The Winner is x!\n");gamestate.state=2;} } void playGame(){ // start playing the game gamestate.state = 3; //set-up the gamestate srand(time(NULL)); int temp = (rand()%2) + 1; if(temp == 2){ // if two comp goes first temp = (rand()%2) + 1; if(temp == 2){ s[4].value = 2; s[4].sign = 'o'; gamestate.moves++; }else{ s[2].value = 2; s[2].sign = 'o'; gamestate.moves++; } } displayBoard(); while(gamestate.state == 3){ if(gamestate.moves<10); getHumanMove(); if(gamestate.moves<10); getCompMove(); checkWinner(); if(gamestate.state == 3 && gamestate.moves==9){ printf("The game is a tie :p\n"); break; } displayBoard(); } } int main(int argc, const char *argv[]){ printf("Welcome to Tic Tac Toe\nby The Elite Noob\nEnter 1-9 To play a move, standard numpad\n1 is bottom-left, 9 is top-right\n"); while(1){ // while game is being played printf("\nPress 1 to play a new game, or any other number to exit;\n>>:"); char line[255]; // input whether or not to play the game fgets(line, sizeof(line), stdin); int choice; // user's choice about playing or not while(sscanf(line, "%d", &choice) != 1) { //1 match of defined specifier on input line printf("Sorry, that's not a valid option!\n"); fgets(line, sizeof(line), stdin); } if(choice == 1){ setUpGame(); // set's up the game playGame(); // Play a Game }else {break;} // exit the application } printf("\nThank's For playing!\nHave a good Day!\n"); return 0; }

  Read the article

• LINQ – SequenceEqual() method

  - by nmarun

  I have been looking at LINQ extension methods and have blogged about what I learned from them in my blog space. Next in line is the SequenceEqual() method. Here’s the description about this method: “Determines whether two sequences are equal by comparing the elements by using the default equality comparer for their type.” Let’s play with some code: 1: int[] numbers = { 5, 4, 1, 3, 9, 8, 6, 7, 2, 0 }; 2: // int[] numbersCopy = numbers; 3: int[] numbersCopy = { 5, 4, 1, 3, 9, 8, 6, 7, 2, 0 }; 4:  5: Console.WriteLine(numbers.SequenceEqual(numbersCopy)); This gives an output of ‘True’ – basically compares each of the elements in the two arrays and returns true in this case. The result is same even if you uncomment line 2 and comment line 3 (I didn’t need to say that now did I?). So then what happens for custom types? For this, I created a Product class with the following definition: 1: class Product 2: { 3: public int ProductId { get; set; } 4: public string Name { get; set; } 5: public string Category { get; set; } 6: public DateTime MfgDate { get; set; } 7: public Status Status { get; set; } 8: } 9:  10: public enum Status 11: { 12: Active = 1, 13: InActive = 2, 14: OffShelf = 3, 15: } In my calling code, I’m just adding a few product items: 1: private static List<Product> GetProducts() 2: { 3: return new List<Product> 4: { 5: new Product 6: { 7: ProductId = 1, 8: Name = "Laptop", 9: Category = "Computer", 10: MfgDate = new DateTime(2003, 4, 3), 11: Status = Status.Active, 12: }, 13: new Product 14: { 15: ProductId = 2, 16: Name = "Compact Disc", 17: Category = "Water Sport", 18: MfgDate = new DateTime(2009, 12, 3), 19: Status = Status.InActive, 20: }, 21: new Product 22: { 23: ProductId = 3, 24: Name = "Floppy", 25: Category = "Computer", 26: MfgDate = new DateTime(1993, 3, 7), 27: Status = Status.OffShelf, 28: }, 29: }; 30: } Now for the actual check: 1: List<Product> products1 = GetProducts(); 2: List<Product> products2 = GetProducts(); 3:  4: Console.WriteLine(products1.SequenceEqual(products2)); This one returns ‘False’ and the reason is simple – this one checks for reference equality and the products in the both the lists get different ‘memory addresses’ (sounds like I’m talking in ‘C’). In order to modify this behavior and return a ‘True’ result, we need to modify the Product class as follows: 1: class Product : IEquatable<Product> 2: { 3: public int ProductId { get; set; } 4: public string Name { get; set; } 5: public string Category { get; set; } 6: public DateTime MfgDate { get; set; } 7: public Status Status { get; set; } 8:  9: public override bool Equals(object obj) 10: { 11: return Equals(obj as Product); 12: } 13:  14: public bool Equals(Product other) 15: { 16: //Check whether the compared object is null. 17: if (ReferenceEquals(other, null)) return false; 18:  19: //Check whether the compared object references the same data. 20: if (ReferenceEquals(this, other)) return true; 21:  22: //Check whether the products' properties are equal. 23: return ProductId.Equals(other.ProductId) 24: && Name.Equals(other.Name) 25: && Category.Equals(other.Category) 26: && MfgDate.Equals(other.MfgDate) 27: && Status.Equals(other.Status); 28: } 29:  30: // If Equals() returns true for a pair of objects 31: // then GetHashCode() must return the same value for these objects. 32: // read why in the following articles: 33: // http://geekswithblogs.net/akraus1/archive/2010/02/28/138234.aspx 34: // http://stackoverflow.com/questions/371328/why-is-it-important-to-override-gethashcode-when-equals-method-is-overriden-in-c 35: public override int GetHashCode() 36: { 37: //Get hash code for the ProductId field. 38: int hashProductId = ProductId.GetHashCode(); 39:  40: //Get hash code for the Name field if it is not null. 41: int hashName = Name == null ? 0 : Name.GetHashCode(); 42:  43: //Get hash code for the ProductId field. 44: int hashCategory = Category.GetHashCode(); 45:  46: //Get hash code for the ProductId field. 47: int hashMfgDate = MfgDate.GetHashCode(); 48:  49: //Get hash code for the ProductId field. 50: int hashStatus = Status.GetHashCode(); 51: //Calculate the hash code for the product. 52: return hashProductId ^ hashName ^ hashCategory & hashMfgDate & hashStatus; 53: } 54:  55: public static bool operator ==(Product a, Product b) 56: { 57: // Enable a == b for null references to return the right value 58: if (ReferenceEquals(a, b)) 59: { 60: return true; 61: } 62: // If one is null and the other not. Remember a==null will lead to Stackoverflow! 63: if (ReferenceEquals(a, null)) 64: { 65: return false; 66: } 67: return a.Equals((object)b); 68: } 69:  70: public static bool operator !=(Product a, Product b) 71: { 72: return !(a == b); 73: } 74: } Now THAT kinda looks overwhelming. But lets take one simple step at a time. Ok first thing you’ve noticed is that the class implements IEquatable<Product> interface – the key step towards achieving our goal. This interface provides us with an ‘Equals’ method to perform the test for equality with another Product object, in this case. This method is called in the following situations: when you do a ProductInstance.Equals(AnotherProductInstance) and when you perform actions like Contains<T>, IndexOf() or Remove() on your collection Coming to the Equals method defined line 14 onwards. The two ‘if’ blocks check for null and referential equality using the ReferenceEquals() method defined in the Object class. Line 23 is where I’m doing the actual check on the properties of the Product instances. This is what returns the ‘True’ for us when we run the application. I have also overridden the Object.Equals() method which calls the Equals() method of the interface. One thing to remember is that anytime you override the Equals() method, its’ a good practice to override the GetHashCode() method and overload the ‘==’ and the ‘!=’ operators. For detailed information on this, please read this and this. Since we’ve overloaded the operators as well, we get ‘True’ when we do actions like: 1: Console.WriteLine(products1.Contains(products2[0])); 2: Console.WriteLine(products1[0] == products2[0]); This completes the full circle on the SequenceEqual() method. See the code used in the article here.

  Read the article

• Why do many software projects fail today?

  - by TomTom

  As long as there are software projects, the world is wondering why they fail so often. I would like to know if there is a list or something equivalent which shows how many software projects fail today. Would be nice if there would be a comparison over the last 20 - 30 years. You can also add your top reason why a software project fails. Mine is "Requirements are poor or not even existing." which includes also "No (real) customer / user involved". EDIT: It is nearly impossible to clearly define the term "fail". Let's say that fail means: The project was more than 10% over budget and time. In my opinion the 10% + / - is a good range for an offer / tender. EDIT: Until now (Feb 11) it seems that most posters agree that a fail of the project is basically a failure of the project management (whatever fail means). But IMHO it comes out, that most developers are not happy with this situation. Perhaps because not the manager get penalized when a project was not successful, but the lazy, incompetent developer teams? When I read the posts I can also hear-out that there is a big "gap" between the developer side and the managment side. The expectations (perhaps also the requirements) seem to be so different, that a project cannot be successful in the end (over time / budget; users are not happy; not all first-prio features implemented; too many bugs because developers were forced to implement in too short timeframes ...) I',m asking myself: How can we improve it? Or do we have the possibility to improve it? Everybody seems to be unsatisfied with the way it goes now. Can we close the gap between these two worlds? Should we (the developers) go on strike and fight for "high quality reqiurements" and "realistic / iteration based time shedules"? EDIT: Ralph Westphal and Stefan Lieser have founded a new "community" called: Clean-Code-Developer. The aim of the group is to bring more professionalism into software engineering. Independently if a developer has a degree or tons of years of experience you can be part of this movement. Clean Code Developers live principles like SOLID every day. A professional developer is the biggest reviewer of his own work. And he has an internal value system which helps him to improve and become better. Check it out on: Clean Code Developer EDIT: Our company is doing at the moment a thing called "Application Development and Maintenance Benchmarking". This is a service offered by IBM to get a feedback from someone external on your software engineering process quality etc. When we get the results, I will tell you more about it.

  Read the article

• Soapui & populating database before

  - by mada

  SoapUi & database data needed Hi, In a J2ee project( spring ws + hibernate +postgresql+maven 2 + tomcat),We have created webservices with full crud operations. We are currently testing them with SoapUi (not yet integrated in the integration-test maven phase ). We need tomcat to test them. Actually before the phase test, with a maven plugin, only one time, some datas are injected in the database before the launch of all tests through many sql files. But the fact is that to test some webservices i need some data entry & their Id (primary key) A- What is the best way to create them ? 1- populate one of the previous .sql test file. But now we have a big dependency where i have to be careful to use the same id use in a insert in the sql file in SoapUi too. And if any developper drop the value, the test will broke. 2- create amongst the .sql file test a soapui.sql where ALL data needed for the Sopaui test will be concentrated. The advantage is that the maintenance will be much more easy. 3-because i have Ws available for all crud operations, i can create before any testsuite a previous testsuite called setup-testsuiteX. In this one, i will use those Ws to inject datas in the databse & save id in variables thanks to the feature "property transfer" 4-launch the soapui test xml file with a junit java test & in the Setup Method (we are using spring test), we will populate the database with DbUnit. Drawback: they are already data in the database & some conflicts may appear due to constraint.And now i have a dependency between: - dbUnit Xml file (with the value primary key) - sopaui test where THOSe value of primarykey will be used advantage: A automatic rollback is possible for DbUnit Data but i dont know how it will react because those data have been used with the Ws. 5- your suggestion ? better idea ? Testing those Ws create datas in the DB. How is the best way to remove them at the end ? (in how daostest we were using a automatic rollback with spring test to let the database clean) Thanks in advance for your hep & sorry for my english, it is not my mother thongue. Regards.

  Read the article

• DHCP settings out of range Internet shuts off after a few minutes

  - by user263115

  I recently upgraded from windows eight to windows 8.1 I do not know if this has anything to do with anything I have a 64 bit OS. My Internet goes off by itself every 5 minutes even though my wireless icon at the lower right of the screen still shows connected I had an error message in the last event in it said that might DHCP settings were out of range. I get my internet at my house through a wireless portable hotspot through my smart phone. But i haven't ever had any problems before and i only have this problem on this network. If i turn airplane mode on and reset my network card, the internet will come back to life but soon die. i don't experience this problem while on a different network or if i'm on WiFi. This s really annoying please help Windows IP Configuration Host Name . . . . . . . . . . . . : NastyMcnastyJr Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : TeamViewer VPN Adapter Physical Address. . . . . . . . . : 00-FF-5D-13-26-21 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Wireless LAN adapter Local Area Connection* 11: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Wi-Fi Direct Virtual Adapter Physical Address. . . . . . . . . : F6-B7-E2-50-09-38 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Wireless LAN adapter SAMMY McNASTY: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom 802.11n Network Adapter Physical Address. . . . . . . . . : F4-B7-E2-50-09-38 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::3107:66bc:cf1f:c776%4(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.43.3(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : Friday, November 1, 2013 9:50:20 PM Lease Expires . . . . . . . . . . : Saturday, November 2, 2013 12:56:46 AM Default Gateway . . . . . . . . . : 192.168.43.1 DHCP Server . . . . . . . . . . . : 192.168.43.1 DHCPv6 IAID . . . . . . . . . . . : 83146722 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-F1-98-B4-20-89-84-84-61-BB DNS Servers . . . . . . . . . . . : 192.168.43.1 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Ethernet: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom NetLink (TM) Gigabit Ethernet Physical Address. . . . . . . . . : 20-89-84-84-61-BB DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Log Name: System Source: Microsoft-Windows-UserPnp Date: 10/26/2013 7:52:23 PM Event ID: 20003 Task Category: (7005) Level: Information Keywords: User: SYSTEM Computer: NastyMcnastyJr Description: Driver Management has concluded the process to add Service vwifibus for Device Instance ID PCI\VEN_14E4&DEV_4727&SUBSYS_E042105B&REV_01\4&3265ADAB&0&00E1 with the following status: 0. Event Xml: 20003 0 4 7005 0 0x8000000000000000 5118 System NastyMcnastyJr vwifibus \SystemRoot\system32\DRIVERS\vwifibus.sys PCI\VEN_14E4&DEV_4727&SUBSYS_E042105B&REV_01\4&3265ADAB&0&00E1 false true 0 Log Name: System Source: Microsoft-Windows-UserPnp Date: 10/19/2013 3:29:12 PM Event ID: 20001 Task Category: (7005) Level: Information Keywords: User: SYSTEM Computer: NastyMcnastyJr Description: Driver Management concluded the process to install driver netbc64.inf_amd64_0df63b5297d0f820\netbc64.inf for Device Instance ID PCI\VEN_14E4&DEV_4727&SUBSYS_E042105B&REV_01\4&3265ADAB&0&00E1 with the following status: 0x0. Event Xml: 20001 0 4 7005 0 0x8000000000000000 2015 System NastyMcnastyJr netbc64.inf_amd64_0df63b5297d0f820\netbc64.inf 6.30.223.102 Microsoft PCI\VEN_14E4&DEV_4727&SUBSYS_E042105B&REV_01\4&3265ADAB&0&00E1 {4D36E972-E325-11CE-BFC1-08002BE10318} false false false 0x0 Broadcom 802.11n Network Adapter Log Name: System Source: Microsoft-Windows-DNS-Client Date: 11/2/2013 12:24:59 AM Event ID: 1014 Task Category: (1014) Level: Warning Keywords: (268435456) User: NETWORK SERVICE Computer: NastyMcnastyJr Description: Name resolution for the name www.google.com timed out after none of the configured DNS servers responded. Event Xml: 1014 0 3 1014 0 0x4000000010000000 34771 System NastyMcnastyJr www.google.com 128 02000000C0A82B01000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000

  Read the article

• PC hangs and reboots from time to time

  - by Bevor

  Hello, I have a very strange problem: Since I have my new PC, I have always had problems with it. From time to time the computer freezes for some seconds and suddendly reboots by itself. I've had this problem since Ubuntu 9.10. The same with 10.04 and 10.10. That's why I don't think it's a software failure because the problem persist too long. It doesn't have anything to do with what I'm doing at this time. Sometimes I listen to music, sometimes I only use Firefox, sometimes I'm running 2 or 3 VMs, sometimes I watch DVD. So it's not isolatable. I could freeze once a day or once a week. I put the PC to the vendor twice(!). The first time they changed my power supply but the problem persisted. The second time they told me that they made some heavy performance tests 50 hours long but they didn't find anything. (How can that be that I have daily freezes with normal usage). The vendor didn't check the hard discs because they used their own disc with Windows. (So they never checked the Linux installation). Yesterday I made some intensive hard disc scans with "SMART" but no errors were found. I ran memtest for 3 times but no errors found. I already had this problem in my old flat, so I doubt that I has something to do with current fluctuation. I already tried another electrical socket and changed to connector strip but the problem persists. At the moment I removed 2 of the RAMs (2x 2GB). In all I have 6GB, 2x2GB and 2x1GB. Could this difference maybe be a problem? Here is a list of my components. I hope that anybody find something I didn't think about yet. And here a list of my components: 1x AMD Phenom II X4 965 Black Edition, 3,4Ghz, Quad Core, S-AM3, Boxed 2x DDR3-RAM 2048MB, PC3-1333 Mhz, CL9, Kingston ValueRAM 2x DDR3-RAM 1024MB, PC3-1333 Mhz, CL9, Kingston ValueRAM 2x SATA II Seagate Barracuda 7200.12, 1TB 32MB Cache = RAID 1 1x DVD ROM SATA LG DH16NSR, 16x/52x 1x DVD-+R/-+RW SATA LG GH-22NS50 1x Cardreader 18in1 1x PCI-E 2.0 GeForce GTS 250, Retail, 1024MB 1x Power Supply ATX 400 Watt, CHIEFTEC APS-400S, 80 Plus 1x Network card PCI Intel PRO/1000GT 10/100/1000 MBit 1x Mainboard Socket-AM3 ASUS M4A79XTD EVO, ATX lshw: description: Desktop Computer product: System Product Name vendor: System manufacturer version: System Version serial: System Serial Number width: 64 bits capabilities: smbios-2.5 dmi-2.5 vsyscall64 vsyscall32 configuration: boot=normal chassis=desktop uuid=80E4001E-8C00-002C-AA59-E0CB4EBAC29A *-core description: Motherboard product: M4A79XTD EVO vendor: ASUSTeK Computer INC. physical id: 0 version: Rev X.0X serial: MT709CK11101196 slot: To Be Filled By O.E.M. *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: 0704 (11/25/2009) size: 64KiB capacity: 960KiB capabilities: isa pci pnp apm upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification *-cpu description: CPU product: AMD Phenom(tm) II X4 965 Processor vendor: Advanced Micro Devices [AMD] physical id: 4 bus info: cpu@0 version: AMD Phenom(tm) II X4 965 Processor serial: To Be Filled By O.E.M. slot: AM3 size: 800MHz capacity: 3400MHz width: 64 bits clock: 200MHz capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp x86-64 3dnowext 3dnow constant_tsc rep_good nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt npt lbrv svm_lock nrip_save cpufreq *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 512KiB capacity: 512KiB capabilities: pipeline-burst internal varies data *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 2MiB capacity: 2MiB capabilities: pipeline-burst internal varies unified *-cache:2 description: L3 cache physical id: 7 slot: L3-Cache size: 6MiB capacity: 6MiB capabilities: pipeline-burst internal varies unified *-memory description: System Memory physical id: 36 slot: System board or motherboard size: 2GiB *-bank:0 description: DIMM Synchronous 1333 MHz (0.8 ns) product: ModulePartNumber00 vendor: Manufacturer00 physical id: 0 serial: SerNum00 slot: DIMM0 size: 1GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: DIMM Synchronous 1333 MHz (0.8 ns) product: ModulePartNumber01 vendor: Manufacturer01 physical id: 1 serial: SerNum01 slot: DIMM1 size: 1GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:2 description: DIMM [empty] product: ModulePartNumber02 vendor: Manufacturer02 physical id: 2 serial: SerNum02 slot: DIMM2 *-bank:3 description: DIMM [empty] product: ModulePartNumber03 vendor: Manufacturer03 physical id: 3 serial: SerNum03 slot: DIMM3 *-pci:0 description: Host bridge product: RD780 Northbridge only dual slot PCI-e_GFX and HT1 K8 part vendor: ATI Technologies Inc physical id: 100 bus info: pci@0000:00:00.0 version: 00 width: 32 bits clock: 66MHz *-pci:0 description: PCI bridge product: RD790 PCI to PCI bridge (external gfx0 port A) vendor: ATI Technologies Inc physical id: 2 bus info: pci@0000:00:02.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:a000(size=4096) memory:f8000000-fbbfffff ioport:d0000000(size=268435456) *-display description: VGA compatible controller product: G92 [GeForce GTS 250] vendor: nVidia Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a2 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:18 memory:fa000000-faffffff memory:d0000000-dfffffff memory:f8000000-f9ffffff ioport:ac00(size=128) memory:fbbe0000-fbbfffff *-pci:1 description: PCI bridge product: RD790 PCI to PCI bridge (PCI express gpp port C) vendor: ATI Technologies Inc physical id: 6 bus info: pci@0000:00:06.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:41 ioport:b000(size=4096) memory:fbc00000-fbcfffff ioport:f6f00000(size=1048576) *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 03 serial: e0:cb:4e:ba:c2:9a size: 10MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10MB/s resources: irq:45 ioport:b800(size=256) memory:f6fff000-f6ffffff memory:f6ff8000-f6ffbfff memory:fbcf0000-fbcfffff *-pci:2 description: PCI bridge product: RD790 PCI to PCI bridge (PCI express gpp port D) vendor: ATI Technologies Inc physical id: 7 bus info: pci@0000:00:07.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:42 ioport:c000(size=4096) memory:fbd00000-fbdfffff *-firewire description: FireWire (IEEE 1394) product: VT6315 Series Firewire Controller vendor: VIA Technologies, Inc. physical id: 0 bus info: pci@0000:03:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress ohci bus_master cap_list configuration: driver=firewire_ohci latency=0 resources: irq:19 memory:fbdff800-fbdfffff ioport:c800(size=256) *-pci:3 description: PCI bridge product: RD790 PCI to PCI bridge (PCI express gpp port E) vendor: ATI Technologies Inc physical id: 9 bus info: pci@0000:00:09.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:43 ioport:d000(size=4096) memory:fbe00000-fbefffff *-ide description: IDE interface product: 88SE6121 SATA II Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:04:00.0 version: b2 width: 32 bits clock: 33MHz capabilities: ide pm msi pciexpress bus_master cap_list configuration: driver=pata_marvell latency=0 resources: irq:17 ioport:dc00(size=8) ioport:d880(size=4) ioport:d800(size=8) ioport:d480(size=4) ioport:d400(size=16) memory:fbeffc00-fbefffff *-storage description: SATA controller product: SB700/SB800 SATA Controller [IDE mode] vendor: ATI Technologies Inc physical id: 11 bus info: pci@0000:00:11.0 logical name: scsi0 logical name: scsi2 version: 00 width: 32 bits clock: 66MHz capabilities: storage msi ahci_1.0 bus_master cap_list emulated configuration: driver=ahci latency=64 resources: irq:44 ioport:9000(size=8) ioport:8000(size=4) ioport:7000(size=8) ioport:6000(size=4) ioport:5000(size=16) memory:f7fffc00-f7ffffff *-disk:0 description: ATA Disk product: ST31000528AS vendor: Seagate physical id: 0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: CC38 serial: 9VP3WD9Z size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=000ad206 *-volume:0 UNCLAIMED description: Linux filesystem partition vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 version: 1.0 serial: 81839235-21ea-4853-90a4-814779f49000 size: 972MiB capacity: 972MiB capabilities: primary ext2 initialized configuration: filesystem=ext2 modified=2010-12-06 18:32:58 mounted=2010-11-01 07:05:10 state=unknown *-volume:1 UNCLAIMED description: Linux swap volume physical id: 2 bus info: scsi@0:0.0.0,2 version: 1 serial: 22b881d5-6f5c-484d-94e8-e231896fa91b size: 486MiB capacity: 486MiB capabilities: primary nofs swap initialized configuration: filesystem=swap pagesize=4096 *-volume:2 UNCLAIMED description: EXT3 volume vendor: Linux physical id: 3 bus info: scsi@0:0.0.0,3 version: 1.0 serial: ad5b0daf-11e8-4f8f-8598-4e89da9c0d84 size: 47GiB capacity: 47GiB capabilities: primary journaled extended_attributes large_files recover ext3 ext2 initialized configuration: created=2010-02-16 20:42:29 filesystem=ext3 modified=2010-11-29 17:02:34 mounted=2010-12-06 18:32:50 state=clean *-volume:3 UNCLAIMED description: Extended partition physical id: 4 bus info: scsi@0:0.0.0,4 size: 882GiB capacity: 882GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume UNCLAIMED description: Linux filesystem partition physical id: 5 capacity: 882GiB *-disk:1 description: ATA Disk product: ST31000528AS vendor: Seagate physical id: 1 bus info: scsi@2:0.0.0 logical name: /dev/sdb version: CC38 serial: 9VP3SCPF size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=000ad206 *-volume:0 UNCLAIMED description: Linux filesystem partition vendor: Linux physical id: 1 bus info: scsi@2:0.0.0,1 version: 1.0 serial: 81839235-21ea-4853-90a4-814779f49000 size: 972MiB capacity: 972MiB capabilities: primary ext2 initialized configuration: filesystem=ext2 modified=2010-12-06 18:32:58 mounted=2010-11-01 07:05:10 state=unknown *-volume:1 UNCLAIMED description: Linux swap volume physical id: 2 bus info: scsi@2:0.0.0,2 version: 1 serial: 22b881d5-6f5c-484d-94e8-e231896fa91b size: 486MiB capacity: 486MiB capabilities: primary nofs swap initialized configuration: filesystem=swap pagesize=4096 *-volume:2 UNCLAIMED description: EXT3 volume vendor: Linux physical id: 3 bus info: scsi@2:0.0.0,3 version: 1.0 serial: ad5b0daf-11e8-4f8f-8598-4e89da9c0d84 size: 47GiB capacity: 47GiB capabilities: primary journaled extended_attributes large_files recover ext3 ext2 initialized configuration: created=2010-02-16 20:42:29 filesystem=ext3 modified=2010-11-29 17:02:34 mounted=2010-12-06 18:32:50 state=clean *-volume:3 UNCLAIMED description: Extended partition physical id: 4 bus info: scsi@2:0.0.0,4 size: 882GiB capacity: 882GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume UNCLAIMED description: Linux filesystem partition physical id: 5 capacity: 882GiB *-usb:0 description: USB Controller product: SB700/SB800 USB OHCI0 Controller vendor: ATI Technologies Inc physical id: 12 bus info: pci@0000:00:12.0 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:16 memory:f7ffd000-f7ffdfff *-usb:1 description: USB Controller product: SB700 USB OHCI1 Controller vendor: ATI Technologies Inc physical id: 12.1 bus info: pci@0000:00:12.1 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:16 memory:f7ffe000-f7ffefff *-usb:2 description: USB Controller product: SB700/SB800 USB EHCI Controller vendor: ATI Technologies Inc physical id: 12.2 bus info: pci@0000:00:12.2 version: 00 width: 32 bits clock: 66MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=64 resources: irq:17 memory:f7fff800-f7fff8ff *-usb:3 description: USB Controller product: SB700/SB800 USB OHCI0 Controller vendor: ATI Technologies Inc physical id: 13 bus info: pci@0000:00:13.0 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:18 memory:f7ffb000-f7ffbfff *-usb:4 description: USB Controller product: SB700 USB OHCI1 Controller vendor: ATI Technologies Inc physical id: 13.1 bus info: pci@0000:00:13.1 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:18 memory:f7ffc000-f7ffcfff *-usb:5 description: USB Controller product: SB700/SB800 USB EHCI Controller vendor: ATI Technologies Inc physical id: 13.2 bus info: pci@0000:00:13.2 version: 00 width: 32 bits clock: 66MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=64 resources: irq:19 memory:f7fff400-f7fff4ff *-serial UNCLAIMED description: SMBus product: SBx00 SMBus Controller vendor: ATI Technologies Inc physical id: 14 bus info: pci@0000:00:14.0 version: 3c width: 32 bits clock: 66MHz capabilities: ht cap_list configuration: latency=0 *-ide description: IDE interface product: SB700/SB800 IDE Controller vendor: ATI Technologies Inc physical id: 14.1 bus info: pci@0000:00:14.1 logical name: scsi5 version: 00 width: 32 bits clock: 66MHz capabilities: ide msi bus_master cap_list emulated configuration: driver=pata_atiixp latency=64 resources: irq:16 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:ff00(size=16) *-cdrom:0 description: DVD reader product: DVDROM DH16NS30 vendor: HL-DT-ST physical id: 0.0.0 bus info: scsi@5:0.0.0 logical name: /dev/cdrom1 logical name: /dev/dvd1 logical name: /dev/scd0 logical name: /dev/sr0 version: 1.00 capabilities: removable audio dvd configuration: ansiversion=5 status=nodisc *-cdrom:1 description: DVD-RAM writer product: DVDRAM GH22NS50 vendor: HL-DT-ST physical id: 0.1.0 bus info: scsi@5:0.1.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/scd1 logical name: /dev/sr1 version: TN02 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-multimedia description: Audio device product: SBx00 Azalia (Intel HDA) vendor: ATI Technologies Inc physical id: 14.2 bus info: pci@0000:00:14.2 version: 00 width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: driver=HDA Intel latency=64 resources: irq:16 memory:f7ff4000-f7ff7fff *-isa description: ISA bridge product: SB700/SB800 LPC host controller vendor: ATI Technologies Inc physical id: 14.3 bus info: pci@0000:00:14.3 version: 00 width: 32 bits clock: 66MHz capabilities: isa bus_master configuration: latency=0 *-pci:4 description: PCI bridge product: SBx00 PCI to PCI Bridge vendor: ATI Technologies Inc physical id: 14.4 bus info: pci@0000:00:14.4 version: 00 width: 32 bits clock: 66MHz capabilities: pci subtractive_decode bus_master resources: ioport:e000(size=4096) memory:fbf00000-fbffffff *-network description: Ethernet interface product: 82541PI Gigabit Ethernet Controller vendor: Intel Corporation physical id: 5 bus info: pci@0000:05:05.0 logical name: eth1 version: 05 serial: 00:1b:21:56:f3:60 size: 100MB/s capacity: 1GB/s width: 32 bits clock: 66MHz capabilities: pm pcix bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000 driverversion=7.3.21-k6-NAPI duplex=full firmware=N/A ip=192.168.1.2 latency=64 link=yes mingnt=255 multicast=yes port=twisted pair speed=100MB/s resources: irq:20 memory:fbfe0000-fbffffff memory:fbfc0000-fbfdffff ioport:ec00(size=64) memory:fbfa0000-fbfbffff *-usb:6 description: USB Controller product: SB700/SB800 USB OHCI2 Controller vendor: ATI Technologies Inc physical id: 14.5 bus info: pci@0000:00:14.5 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:18 memory:f7ffa000-f7ffafff *-pci:1 description: Host bridge product: Family 10h Processor HyperTransport Configuration vendor: Advanced Micro Devices [AMD] physical id: 101 bus info: pci@0000:00:18.0 version: 00 width: 32 bits clock: 33MHz *-pci:2 description: Host bridge product: Family 10h Processor Address Map vendor: Advanced Micro Devices [AMD] physical id: 102 bus info: pci@0000:00:18.1 version: 00 width: 32 bits clock: 33MHz *-pci:3 description: Host bridge product: Family 10h Processor DRAM Controller vendor: Advanced Micro Devices [AMD] physical id: 103 bus info: pci@0000:00:18.2 version: 00 width: 32 bits clock: 33MHz *-pci:4 description: Host bridge product: Family 10h Processor Miscellaneous Control vendor: Advanced Micro Devices [AMD] physical id: 104 bus info: pci@0000:00:18.3 version: 00 width: 32 bits clock: 33MHz configuration: driver=k10temp resources: irq:0 *-pci:5 description: Host bridge product: Family 10h Processor Link Control vendor: Advanced Micro Devices [AMD] physical id: 105 bus info: pci@0000:00:18.4 version: 00 width: 32 bits clock: 33MHz *-scsi physical id: 1 bus info: usb@2:3 logical name: scsi8 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk:0 description: SCSI Disk physical id: 0.0.0 bus info: scsi@8:0.0.0 logical name: /dev/sdc *-disk:1 description: SCSI Disk physical id: 0.0.1 bus info: scsi@8:0.0.1 logical name: /dev/sdd *-disk:2 description: SCSI Disk physical id: 0.0.2 bus info: scsi@8:0.0.2 logical name: /dev/sde *-disk:3 description: SCSI Disk physical id: 0.0.3 bus info: scsi@8:0.0.3 logical name: /dev/sdf *-network DISABLED description: Ethernet interface physical id: 1 logical name: vboxnet0 serial: 0a:00:27:00:00:00 capabilities: ethernet physical configuration: broadcast=yes multicast=yes

  Read the article

• angular-ui maps javascript error

  - by Will Lopez

  I'm having an issue with angularui. This error came from angular-google-maps.js: Error: [$compile:ctreq] Controller 'googleMap', required by directive 'rectangle', can't be found! http://errors.angularjs.org/1.2.16/$compile/ctreq?p0=googleMap&p1=rectangle at http://localhost:62874/Scripts/angular.js:78:12 at getControllers (http://localhost:62874/Scripts/angular.js:6409:19) at nodeLinkFn (http://localhost:62874/Scripts/angular.js:6580:35) at compositeLinkFn (http://localhost:62874/Scripts/angular.js:5986:15) at compositeLinkFn (http://localhost:62874/Scripts/angular.js:5989:13) at compositeLinkFn (http://localhost:62874/Scripts/angular.js:5989:13) at nodeLinkFn (http://localhost:62874/Scripts/angular.js:6573:24) at compositeLinkFn (http://localhost:62874/Scripts/angular.js:5986:15) at Scope.publicLinkFn [as $transcludeFn] (http://localhost:62874/Scripts/angular.js:5891:30) at link (http://localhost:62874/Scripts/ui-bootstrap-tpls-0.12.0.min.js:9:8037) <div class="rectangle grid-style ng-scope ng-isolate-scope" data-ng-grid="pipelineGrid"> I'm a little confused because the controller isn't trying to inject the angular-ui map directive: appRoot.controller('PipelineController', ["$scope", "$location", "$resource", function ($scope, $location, $resource) { ... Here's the html: <div class="container"> <tabset> <tab heading="Upload File"> <p>Tab 1 content</p> </tab> <tab heading="Data Maintenance"> Tab 2 content <div ng-controller="PipelineController"> <div id="mapFilter" class="panel panel-default"> <div class="panel-heading text-right"> <div class="input-group"> <input type="text" class="form-control" ng- model="pipelineGrid.filterOptions.filterText" placeholder="enter filter" /> <span class="input-group-addon"><span class="glyphicon glyphicon- filter"></span></span> </div> </div> <div class="panel-body"> <div class="rectangle grid-style" data-ng-grid="pipelineGrid"> </div> </div> </div> </div> </tab> </tabset> </div> Thank you!

  Read the article

• Which version of MSXML should I use?

  - by Cheeso

  Seems like this would be a common question, though I could not find it on SO. Which version of MSXML should I use in my applications, and more importantly, how should I decide? There is MSXML3, 4, 5 and 6. I recently posted some code in calling-wcf-service-by-vbscript that used MSXML v4. AnthonyWJones posted that I shouldn't use 4, but instead 3 or 6, but probably 3. Certainly not v5! Why? I'd like to know more about the criteria for selecting the version of MSXML to use in my apps. Bonus question: Does anyone have a summary of the differences between the various versions of MSXML over time? Summary so far: MSXML6 Should be first choice. was released in 2006, and includes perf and compliance fixes. Use this if you can. It's good. There are no merge modules; to bundle the MSXML6 runtime with your app, MS suggests packaging the MSXML6 msi file. MSXML6 is an upgrade from MSXML3/4 but does not replace them, because it discontinues some features. You can get the MSI here. MSXML3 Second choice. Most widely deployed version. Originally shipped in March 2000. Actively maintained, no new features. Currently supported, if you are on SP5 (shipped in 2005) or later. SP7 is current (also from 2005). MSXML5 was released only as part of MS-Office. Currently supported by Microsoft, but only as part of Office, not for building apps. Don't build apps that depend on MSXML5: Verboten. MSXML4 originally shipped? Currently in "maintenance mode". Microsoft is encouraging people to move off MSXML4 to MSXML6. Currently supported if you are on MSXML4SP2 or later, which shipped in 2003. download MSXML4SP2 here. Can be redisributed. Using the right version of MSXML in Internet Explorer is a good entry on the blog from Microsoft's xmlteam.

  Read the article

• Is MVVM pointless?

  - by joebeazelman

  Is orthodox MVVM implementation pointless? I am creating a new application and I considered Windows Forms and WPF. I chose WPF because it's future-proof and offer lots of flexibility. There is less code and easier to make significant changes to your UI using XAML. Since the choice for WPF is obvious, I figured that I may as well go all the way by using MVVM as my application architecture since it offers blendability, separation concerns and unit testability. Theoretically, it seems beautiful like the holy grail of UI programming. This brief adventure; however, has turned into a real headache. As expected in practice, I’m finding that I’ve traded one problem for another. I tend to be an obsessive programmer in that I want to do things the right way so that I can get the right results and possibly become a better programmer. The MVVM pattern just flunked my test on productivity and has just turned into a big yucky hack! The clear case in point is adding support for a Modal dialog box. The correct way is to put up a dialog box and tie it to a view model. Getting this to work is difficult. In order to benefit from the MVVM pattern, you have to distribute code in several places throughout the layers of your application. You also have to use esoteric programming constructs like templates and lamba expressions. Stuff that makes you stare at the screen scratching your head. This makes maintenance and debugging a nightmare waiting to happen as I recently discovered. I had an about box working fine until I got an exception the second time I invoked it, saying that it couldn’t show the dialog box again once it is closed. I had to add an event handler for the close functionality to the dialog window, another one in the IDialogView implementation of it and finally another in the IDialogViewModel. I thought MVVM would save us from such extravagant hackery! There are several folks out there with competing solutions to this problem and they are all hacks and don’t provide a clean, easily reusable, elegant solution. Most of the MVVM toolkits gloss over dialogs and when they do address them, they are just alert boxes that don’t require custom interfaces or view models. I’m planning on giving up on the MVVM view pattern, at least its orthodox implementation of it. What do you think? Has it been worth the trouble for you if you had any? Am I just a incompetent programmer or does MVVM not what it's hyped up to be?

  Read the article

• How to Connect Crystal Reports to MySQL directly by C# code without DSN or a DataSet

  - by Yanko Hernández Alvarez

  How can I connect a Crystal Report (VS 2008 basic) to a MySQL DB without using a DSN or a preload DataSet using C#? I need install the program on several places, so I must change the connection parameters. I don't want to create a DSN on every place, nor do I want to preload a DataSet and pass it to the report engine. I use nhibernate to access the database, so to create and fill the additional DS would take twice the work and additional maintenance later. I think the best option would be to let the crystal reports engine to connect to MySQL server by itself using ODBC. I managed to create the connection in the report designer (VS2008) using the Database Expert, creating an ODBC(RDO) connection and entering this connection string "DRIVER={MySQL ODBC 5.1 Driver};SERVER=myserver.mydomain" and in the "Next" page filling the "User ID", "Password" and "Database" parameters. I didn't fill the "Server" parameter. It worked. As a matter of fact, if you use the former connection string, it doesn't matter what you put on the "Server" parameter, it seems the parameter is unused. On the other hand, if you use "DRIVER={MySQL ODBC 5.1 Driver}" as a connection string and later fill the "Server" parameter with the FQDN of the server, the connection doesn't work. How can I do that by code? All the examples I've seen till now, use a DSN or the DataSet method. I saw the same question posted but for PostgreSQL and tried to adapt it to mysql, but so far, no success. The first method: Rp.Load(); Rp.DataSourceConnections[0].SetConnection("DRIVER={MySQL ODBC 5.1 Driver};SERVER=myserver.mydomain", "database", "user", "pass"); Rp.ExportToDisk(ExportFormatType.PortableDocFormat, "report.pdf"); raise an CrystalDecisions.CrystalReports.Engine.LogOnException during ExportToDisk Message="Logon failed.\nDetails: IM002:[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified.\rError in File temporal file path.rpt:\nUnable to connect: incorrect log on parameters. the InnerException is an System.Runtime.InteropServices.COMException with the same message and no InnerException The "no default driver specified" makes me wonder if the server parameter is unused here too (see above). In that case: How can I specify the connection string? I haven't tried the second method because it doesn't apply. Does anybody know the solution?

  Read the article

• Search multiple datepicker on same grid

  - by DHF

  I'm using multiple datepicker on same grid and I face the problem to get a proper result. I used 3 datepicker in 1 grid. Only the first datepicker (Order Date)is able to output proper result while the other 2 datepicker (Start Date & End Date) are not able to generate proper result. There is no problem with the query, so could you find out what's going on here? Thanks in advance! php wrapper <?php ob_start(); require_once 'config.php'; // include the jqGrid Class require_once "php/jqGrid.php"; // include the PDO driver class require_once "php/jqGridPdo.php"; // include the datepicker require_once "php/jqCalendar.php"; // Connection to the server $conn = new PDO(DB_DSN,DB_USER,DB_PASSWORD); // Tell the db that we use utf-8 $conn->query("SET NAMES utf8"); // Create the jqGrid instance $grid = new jqGridRender($conn); // Write the SQL Query $grid->SelectCommand = "SELECT c.CompanyID, c.CompanyCode, c.CompanyName, c.Area, o.OrderCode, o.Date, m.maID ,m.System, m.Status, m.StartDate, m.EndDate, m.Type FROM company c, orders o, maintenance_agreement m WHERE c.CompanyID = o.CompanyID AND o.OrderID = m.OrderID "; // Set the table to where you update the data $grid->table = 'maintenance_agreement'; // set the ouput format to json $grid->dataType = 'json'; // Let the grid create the model $grid->setPrimaryKeyId('maID'); // Let the grid create the model $grid->setColModel(); // Set the url from where we obtain the data $grid->setUrl('grouping_ma_details.php'); // Set grid caption using the option caption $grid->setGridOptions(array( "sortable"=>true, "rownumbers"=>true, "caption"=>"Group by Maintenance Agreement", "rowNum"=>20, "height"=>'auto', "width"=>1300, "sortname"=>"maID", "hoverrows"=>true, "rowList"=>array(10,20,50), "footerrow"=>false, "userDataOnFooter"=>false, "grouping"=>true, "groupingView"=>array( "groupField" => array('CompanyName'), "groupColumnShow" => array(true), //show or hide area column "groupText" =>array('<b> Company Name: {0}</b>',), "groupDataSorted" => true, "groupSummary" => array(true) ) )); if(isset($_SESSION['login_admin'])) { $grid->addCol(array( "name"=>"Action", "formatter"=>"actions", "editable"=>false, "sortable"=>false, "resizable"=>false, "fixed"=>true, "width"=>60, "formatoptions"=>array("keys"=>true), "search"=>false ), "first"); } // Change some property of the field(s) $grid->setColProperty("CompanyID", array("label"=>"ID","hidden"=>true,"width"=>30,"editable"=>false,"editoptions"=>array("readonly"=>"readonly"))); $grid->setColProperty("CompanyName", array("label"=>"Company Name","hidden"=>true,"editable"=>false,"width"=>150,"align"=>"center","fixed"=>true)); $grid->setColProperty("CompanyCode", array("label"=>"Company Code","hidden"=>true,"width"=>50,"align"=>"center")); $grid->setColProperty("OrderCode", array("label"=>"Order Code","width"=>110,"editable"=>false,"align"=>"center","fixed"=>true)); $grid->setColProperty("maID", array("hidden"=>true)); $grid->setColProperty("System", array("width"=>150,"fixed"=>true,"align"=>"center")); $grid->setColProperty("Type", array("width"=>280,"fixed"=>true)); $grid->setColProperty("Status", array("width"=>70,"align"=>"center","edittype"=>"select","editoptions"=>array("value"=>"Yes:Yes;No:No"),"fixed"=>true)); $grid->setSelect('System', "SELECT DISTINCT System, System AS System FROM master_ma_system ORDER BY System", false, true, true, array(""=>"All")); $grid->setSelect('Type', "SELECT DISTINCT Type, Type AS Type FROM master_ma_type ORDER BY Type", false, true, true, array(""=>"All")); $grid->setColProperty("StartDate", array("label"=>"Start Date","width"=>120,"align"=>"center","fixed"=>true, "formatter"=>"date", "formatoptions"=>array("srcformat"=>"Y-m-d H:i:s","newformat"=>"d M Y") )); // this is only in this case since the orderdate is set as date time $grid->setUserTime("d M Y"); $grid->setUserDate("d M Y"); $grid->setDatepicker("StartDate",array("buttonOnly"=>false)); $grid->datearray = array('StartDate'); $grid->setColProperty("EndDate", array("label"=>"End Date","width"=>120,"align"=>"center","fixed"=>true, "formatter"=>"date", "formatoptions"=>array("srcformat"=>"Y-m-d H:i:s","newformat"=>"d M Y") )); // this is only in this case since the orderdate is set as date time $grid->setUserTime("d M Y"); $grid->setUserDate("d M Y"); $grid->setDatepicker("EndDate",array("buttonOnly"=>false)); $grid->datearray = array('EndDate'); $grid->setColProperty("Date", array("label"=>"Order Date","width"=>100,"editable"=>false,"align"=>"center","fixed"=>true, "formatter"=>"date", "formatoptions"=>array("srcformat"=>"Y-m-d H:i:s","newformat"=>"d M Y") )); // this is only in this case since the orderdate is set as date time $grid->setUserTime("d M Y"); $grid->setUserDate("d M Y"); $grid->setDatepicker("Date",array("buttonOnly"=>false)); $grid->datearray = array('Date'); // This command is executed after edit $maID = jqGridUtils::GetParam('maID'); $Status = jqGridUtils::GetParam('Status'); $StartDate = jqGridUtils::GetParam('StartDate'); $EndDate = jqGridUtils::GetParam('EndDate'); $Type = jqGridUtils::GetParam('Type'); // This command is executed immediatley after edit occur. $grid->setAfterCrudAction('edit', "UPDATE maintenance_agreement SET m.Status=?, m.StartDate=?, m.EndDate=?, m.Type=? WHERE m.maID=?", array($Status,$StartDate,$EndDate,$Type,$maID)); $selectorder = <<<ORDER function(rowid, selected) { if(rowid != null) { jQuery("#detail").jqGrid('setGridParam',{postData:{CompanyID:rowid}}); jQuery("#detail").trigger("reloadGrid"); // Enable CRUD buttons in navigator when a row is selected jQuery("#add_detail").removeClass("ui-state-disabled"); jQuery("#edit_detail").removeClass("ui-state-disabled"); jQuery("#del_detail").removeClass("ui-state-disabled"); } } ORDER; // We should clear the grid data on second grid on sorting, paging, etc. $cleargrid = <<<CLEAR function(rowid, selected) { // clear the grid data and footer data jQuery("#detail").jqGrid('clearGridData',true); // Disable CRUD buttons in navigator when a row is not selected jQuery("#add_detail").addClass("ui-state-disabled"); jQuery("#edit_detail").addClass("ui-state-disabled"); jQuery("#del_detail").addClass("ui-state-disabled"); } CLEAR; $grid->setGridEvent('onSelectRow', $selectorder); $grid->setGridEvent('onSortCol', $cleargrid); $grid->setGridEvent('onPaging', $cleargrid); $grid->setColProperty("Area", array("width"=>100,"hidden"=>false,"editable"=>false,"fixed"=>true)); $grid->setColProperty("HeadCount", array("label"=>"Head Count","align"=>"center", "width"=>100,"hidden"=>false,"fixed"=>true)); $grid->setSelect('Area', "SELECT DISTINCT AreaName, AreaName AS Area FROM master_area ORDER BY AreaName", false, true, true, array(""=>"All")); $grid->setSelect('CompanyName', "SELECT DISTINCT CompanyName, CompanyName AS CompanyName FROM company ORDER BY CompanyName", false, true, true, array(""=>"All")); $custom = <<<CUSTOM jQuery("#getselected").click(function(){ var selr = jQuery('#grid').jqGrid('getGridParam','selrow'); if(selr) { window.open('http://www.smartouch-cdms.com/order.php?CompanyID='+selr); } else alert("No selected row"); return false; }); CUSTOM; $grid->setJSCode($custom); // Enable toolbar searching $grid->toolbarfilter = true; $grid->setFilterOptions(array("stringResult"=>true,"searchOnEnter"=>false,"defaultSearch"=>"cn")); // Enable navigator $grid->navigator = true; // disable the delete operation programatically for that table $grid->del = false; // we need to write some custom code when we are in delete mode. // get the grid operation parameter to see if we are in delete mode // jqGrid sends the "oper" parameter to identify the needed action $deloper = $_POST['oper']; // det the company id $cid = $_POST['CompanyID']; // if the operation is del and the companyid is set if($deloper == 'del' && isset($cid) ) { // the two tables are linked via CompanyID, so let try to delete the records in both tables try { jqGridDB::beginTransaction($conn); $comp = jqGridDB::prepare($conn, "DELETE FROM company WHERE CompanyID= ?", array($cid)); $cont = jqGridDB::prepare($conn,"DELETE FROM contact WHERE CompanyID = ?", array($cid)); jqGridDB::execute($comp); jqGridDB::execute($cont); jqGridDB::commit($conn); } catch(Exception $e) { jqGridDB::rollBack($conn); echo $e->getMessage(); } } // Enable only deleting if(isset($_SESSION['login_admin'])) { $grid->setNavOptions('navigator', array("pdf"=>true, "excel"=>true,"add"=>false,"edit"=>true,"del"=>false,"view"=>true, "search"=>true)); } else $grid->setNavOptions('navigator', array("pdf"=>true, "excel"=>true,"add"=>false,"edit"=>false,"del"=>false,"view"=>true, "search"=>true)); // In order to enable the more complex search we should set multipleGroup option // Also we need show query roo $grid->setNavOptions('search', array( "multipleGroup"=>false, "showQuery"=>true )); // Set different filename $grid->exportfile = 'Company.xls'; // Close the dialog after editing $grid->setNavOptions('edit',array("closeAfterEdit"=>true,"editCaption"=>"Update Company","bSubmit"=>"Update","dataheight"=>"auto")); $grid->setNavOptions('add',array("closeAfterAdd"=>true,"addCaption"=>"Add New Company","bSubmit"=>"Update","dataheight"=>"auto")); $grid->setNavOptions('view',array("Caption"=>"View Company","dataheight"=>"auto","width"=>"1100")); ob_end_clean(); //solve TCPDF error // Enjoy $grid->renderGrid('#grid','#pager',true, null, null, true,true); $conn = null; ?> javascript code jQuery(document).ready(function ($) { jQuery('#grid').jqGrid({ "width": 1300, "hoverrows": true, "viewrecords": true, "jsonReader": { "repeatitems": false, "subgrid": { "repeatitems": false } }, "xmlReader": { "repeatitems": false, "subgrid": { "repeatitems": false } }, "gridview": true, "url": "session_ma_details.php", "editurl": "session_ma_details.php", "cellurl": "session_ma_details.php", "sortable": true, "rownumbers": true, "caption": "Group by Maintenance Agreement", "rowNum": 20, "height": "auto", "sortname": "maID", "rowList": [10, 20, 50], "footerrow": false, "userDataOnFooter": false, "grouping": true, "groupingView": { "groupField": ["CompanyName"], "groupColumnShow": [false], "groupText": ["<b> Company Name: {0}</b>"], "groupDataSorted": true, "groupSummary": [true] }, "onSelectRow": function (rowid, selected) { if (rowid != null) { jQuery("#detail").jqGrid('setGridParam', { postData: { CompanyID: rowid } }); jQuery("#detail").trigger("reloadGrid"); // Enable CRUD buttons in navigator when a row is selected jQuery("#add_detail").removeClass("ui-state-disabled"); jQuery("#edit_detail").removeClass("ui-state-disabled"); jQuery("#del_detail").removeClass("ui-state-disabled"); } }, "onSortCol": function (rowid, selected) { // clear the grid data and footer data jQuery("#detail").jqGrid('clearGridData', true); // Disable CRUD buttons in navigator when a row is not selected jQuery("#add_detail").addClass("ui-state-disabled"); jQuery("#edit_detail").addClass("ui-state-disabled"); jQuery("#del_detail").addClass("ui-state-disabled"); }, "onPaging": function (rowid, selected) { // clear the grid data and footer data jQuery("#detail").jqGrid('clearGridData', true); // Disable CRUD buttons in navigator when a row is not selected jQuery("#add_detail").addClass("ui-state-disabled"); jQuery("#edit_detail").addClass("ui-state-disabled"); jQuery("#del_detail").addClass("ui-state-disabled"); }, "datatype": "json", "colModel": [ { "name": "Action", "formatter": "actions", "editable": false, "sortable": false, "resizable": false, "fixed": true, "width": 60, "formatoptions": { "keys": true }, "search": false }, { "name": "CompanyID", "index": "CompanyID", "sorttype": "int", "label": "ID", "hidden": true, "width": 30, "editable": false, "editoptions": { "readonly": "readonly" } }, { "name": "CompanyCode", "index": "CompanyCode", "sorttype": "string", "label": "Company Code", "hidden": true, "width": 50, "align": "center", "editable": true }, { "name": "CompanyName", "index": "CompanyName", "sorttype": "string", "label": "Company Name", "hidden": true, "editable": false, "width": 150, "align": "center", "fixed": true, "edittype": "select", "editoptions": { "value": "Aquatex Industries:Aquatex Industries;Benithem Sdn Bhd:Benithem Sdn Bhd;Daily Bakery Sdn Bhd:Daily Bakery Sdn Bhd;Eurocor Asia Sdn Bhd:Eurocor Asia Sdn Bhd;Evergrown Technology:Evergrown Technology;Goldpar Precision:Goldpar Precision;MicroSun Technologies Asia:MicroSun Technologies Asia;NCI Industries Sdn Bhd:NCI Industries Sdn Bhd;PHHP Marketing:PHHP Marketing;Smart Touch Technology:Smart Touch Technology;THOSCO Treatech:THOSCO Treatech;YHL Trading (Johor) Sdn Bhd:YHL Trading (Johor) Sdn Bhd;Zenxin Agri-Organic Food:Zenxin Agri-Organic Food", "separator": ":", "delimiter": ";" }, "stype": "select", "searchoptions": { "value": ":All;Aquatex Industries:Aquatex Industries;Benithem Sdn Bhd:Benithem Sdn Bhd;Daily Bakery Sdn Bhd:Daily Bakery Sdn Bhd;Eurocor Asia Sdn Bhd:Eurocor Asia Sdn Bhd;Evergrown Technology:Evergrown Technology;Goldpar Precision:Goldpar Precision;MicroSun Technologies Asia:MicroSun Technologies Asia;NCI Industries Sdn Bhd:NCI Industries Sdn Bhd;PHHP Marketing:PHHP Marketing;Smart Touch Technology:Smart Touch Technology;THOSCO Treatech:THOSCO Treatech;YHL Trading (Johor) Sdn Bhd:YHL Trading (Johor) Sdn Bhd;Zenxin Agri-Organic Food:Zenxin Agri-Organic Food", "separator": ":", "delimiter": ";" } }, { "name": "Area", "index": "Area", "sorttype": "string", "width": 100, "hidden": true, "editable": false, "fixed": true, "edittype": "select", "editoptions": { "value": "Cemerlang:Cemerlang;Danga Bay:Danga Bay;Kulai:Kulai;Larkin:Larkin;Masai:Masai;Nusa Cemerlang:Nusa Cemerlang;Nusajaya:Nusajaya;Pasir Gudang:Pasir Gudang;Pekan Nenas:Pekan Nenas;Permas Jaya:Permas Jaya;Pontian:Pontian;Pulai:Pulai;Senai:Senai;Skudai:Skudai;Taman Gaya:Taman Gaya;Taman Johor Jaya:Taman Johor Jaya;Taman Molek:Taman Molek;Taman Pelangi:Taman Pelangi;Taman Sentosa:Taman Sentosa;Tebrau 4:Tebrau 4;Ulu Tiram:Ulu Tiram", "separator": ":", "delimiter": ";" }, "stype": "select", "searchoptions": { "value": ":All;Cemerlang:Cemerlang;Danga Bay:Danga Bay;Kulai:Kulai;Larkin:Larkin;Masai:Masai;Nusa Cemerlang:Nusa Cemerlang;Nusajaya:Nusajaya;Pasir Gudang:Pasir Gudang;Pekan Nenas:Pekan Nenas;Permas Jaya:Permas Jaya;Pontian:Pontian;Pulai:Pulai;Senai:Senai;Skudai:Skudai;Taman Gaya:Taman Gaya;Taman Johor Jaya:Taman Johor Jaya;Taman Molek:Taman Molek;Taman Pelangi:Taman Pelangi;Taman Sentosa:Taman Sentosa;Tebrau 4:Tebrau 4;Ulu Tiram:Ulu Tiram", "separator": ":", "delimiter": ";" } }, { "name": "OrderCode", "index": "OrderCode", "sorttype": "string", "label": "Order No.", "width": 110, "editable": false, "align": "center", "fixed": true }, { "name": "Date", "index": "Date", "sorttype": "date", "label": "Order Date", "width": 100, "editable": false, "align": "center", "fixed": true, "formatter": "date", "formatoptions": { "srcformat": "Y-m-d H:i:s", "newformat": "d M Y" }, "editoptions": { "dataInit": function(el) { setTimeout(function() { if (jQuery.ui) { if (jQuery.ui.datepicker) { jQuery(el).datepicker({ "disabled": false, "dateFormat": "dd M yy" }); jQuery('.ui-datepicker').css({ 'font-size': '75%' }); } } }, 100); } }, "searchoptions": { "dataInit": function(el) { setTimeout(function() { if (jQuery.ui) { if (jQuery.ui.datepicker) { jQuery(el).datepicker({ "disabled": false, "dateFormat": "dd M yy" }); jQuery('.ui-datepicker').css({ 'font-size': '75%' }); } } }, 100); } } }, { "name": "maID", "index": "maID", "sorttype": "int", "key": true, "hidden": true, "editable": true }, { "name": "System", "index": "System", "sorttype": "string", "width": 150, "fixed": true, "align": "center", "edittype": "select", "editoptions": { "value": "Payroll:Payroll;TMS:TMS;TMS & Payroll:TMS & Payroll", "separator": ":", "delimiter": ";" }, "stype": "select", "searchoptions": { "value": ":All;Payroll:Payroll;TMS:TMS;TMS & Payroll:TMS & Payroll", "separator": ":", "delimiter": ";" }, "editable": true }, { "name": "Status", "index": "Status", "sorttype": "string", "width": 70, "align": "center", "edittype": "select", "editoptions": { "value": "Yes:Yes;No:No" }, "fixed": true, "editable": true }, { "name": "StartDate", "index": "StartDate", "sorttype": "date", "label": "Start Date", "width": 120, "align": "center", "fixed": true, "formatter": "date", "formatoptions": { "srcformat": "Y-m-d H:i:s", "newformat": "d M Y" }, "editoptions": { "dataInit": function(el) { setTimeout(function() { if (jQuery.ui) { if (jQuery.ui.datepicker) { jQuery(el).datepicker({ "disabled": false, "dateFormat": "dd M yy" }); jQuery('.ui-datepicker').css({ 'font-size': '75%' }); } } }, 100); } }, "searchoptions": { "dataInit": function(el) { setTimeout(function() { if (jQuery.ui) { if (jQuery.ui.datepicker) { jQuery(el).datepicker({ "disabled": false, "dateFormat": "dd M yy" }); jQuery('.ui-datepicker').css({ 'font-size': '75%' }); } } }, 100); } }, "editable": true }, { "name": "EndDate", "index": "EndDate", "sorttype": "date", "label": "End Date", "width": 120, "align": "center", "fixed": true, "formatter": "date", "formatoptions": { "srcformat": "Y-m-d H:i:s", "newformat": "d M Y" }, "editoptions": { "dataInit": function(el) { setTimeout(function() { if (jQuery.ui) { if (jQuery.ui.datepicker) { jQuery(el).datepicker({ "disabled": false, "dateFormat": "dd M yy" }); jQuery('.ui-datepicker').css({ 'font-size': '75%' }); } } }, 100); } }, "searchoptions": { "dataInit": function(el) { setTimeout(function() { if (jQuery.ui) { if (jQuery.ui.datepicker) { jQuery(el).datepicker({ "disabled": false, "dateFormat": "dd M yy" }); jQuery('.ui-datepicker').css({ 'font-size': '75%' }); } } }, 100); } }, "editable": true }, { "name": "Type", "index": "Type", "sorttype": "string", "width": 530, "fixed": true, "edittype": "select", "editoptions": { "value": "Comprehensive MA:Comprehensive MA;FOC service, 20% spare part discount:FOC service, 20% spare part discount;Standard Package, FOC 1 time service, 20% spare part discount:Standard Package, FOC 1 time service, 20% spare part discount;Standard Package, FOC 2 time service, 20% spare part discount:Standard Package, FOC 2 time service, 20% spare part discount;Standard Package, FOC 3 time service, 20% spare part discount:Standard Package, FOC 3 time service, 20% spare part discount;Standard Package, FOC 4 time service, 20% spare part discount:Standard Package, FOC 4 time service, 20% spare part discount;Standard Package, FOC 6 time service, 20% spare part discount:Standard Package, FOC 6 time service, 20% spare part discount;Standard Package, no free:Standard Package, no free", "separator": ":", "delimiter": ";" }, "stype": "select", "searchoptions": { "value": ":All;Comprehensive MA:Comprehensive MA;FOC service, 20% spare part discount:FOC service, 20% spare part discount;Standard Package, FOC 1 time service, 20% spare part discount:Standard Package, FOC 1 time service, 20% spare part discount;Standard Package, FOC 2 time service, 20% spare part discount:Standard Package, FOC 2 time service, 20% spare part discount;Standard Package, FOC 3 time service, 20% spare part discount:Standard Package, FOC 3 time service, 20% spare part discount;Standard Package, FOC 4 time service, 20% spare part discount:Standard Package, FOC 4 time service, 20% spare part discount;Standard Package, FOC 6 time service, 20% spare part discount:Standard Package, FOC 6 time service, 20% spare part discount;Standard Package, no free:Standard Package, no free", "separator": ":", "delimiter": ";" }, "editable": true } ], "postData": { "oper": "grid" }, "prmNames": { "page": "page", "rows": "rows", "sort": "sidx", "order": "sord", "search": "_search", "nd": "nd", "id": "maID", "filter": "filters", "searchField": "searchField", "searchOper": "searchOper", "searchString": "searchString", "oper": "oper", "query": "grid", "addoper": "add", "editoper": "edit", "deloper": "del", "excel": "excel", "subgrid": "subgrid", "totalrows": "totalrows", "autocomplete": "autocmpl" }, "loadError": function(xhr, status, err) { try { jQuery.jgrid.info_dialog(jQuery.jgrid.errors.errcap, '<div class="ui-state-error">' + xhr.responseText + '</div>', jQuery.jgrid.edit.bClose, { buttonalign: 'right' } ); } catch(e) { alert(xhr.responseText); } }, "pager": "#pager" }); jQuery('#grid').jqGrid('navGrid', '#pager', { "edit": true, "add": false, "del": false, "search": true, "refresh": true, "view": true, "excel": true, "pdf": true, "csv": false, "columns": false }, { "drag": true, "resize": true, "closeOnEscape": true, "dataheight": "auto", "errorTextFormat": function (r) { return r.responseText; }, "closeAfterEdit": true, "editCaption": "Update Company", "bSubmit": "Update" }, { "drag": true, "resize": true, "closeOnEscape": true, "dataheight": "auto", "errorTextFormat": function (r) { return r.responseText; }, "closeAfterAdd": true, "addCaption": "Add New Company", "bSubmit": "Update" }, { "errorTextFormat": function (r) { return r.responseText; } }, { "drag": true, "closeAfterSearch": true, "multipleSearch": true }, { "drag": true, "resize": true, "closeOnEscape": true, "dataheight": "auto", "Caption": "View Company", "width": "1100" } ); jQuery('#grid').jqGrid('navButtonAdd', '#pager', { id: 'pager_excel', caption: '', title: 'Export To Excel', onClickButton: function (e) { try { jQuery("#grid").jqGrid('excelExport', { tag: 'excel', url: 'session_ma_details.php' }); } catch (e) { window.location = 'session_ma_details.php?oper=excel'; } }, buttonicon: 'ui-icon-newwin' }); jQuery('#grid').jqGrid('navButtonAdd', '#pager', { id: 'pager_pdf', caption: '', title: 'Export To Pdf', onClickButton: function (e) { try { jQuery("#grid").jqGrid('excelExport', { tag: 'pdf', url: 'session_ma_details.php' }); } catch (e) { window.location = 'session_ma_details.php?oper=pdf'; } }, buttonicon: 'ui-icon-print' }); jQuery('#grid').jqGrid('filterToolbar', { "stringResult": true, "searchOnEnter": false, "defaultSearch": "cn" }); jQuery("#getselected").click(function () { var selr = jQuery('#grid').jqGrid('getGridParam', 'selrow'); if (selr) { window.open('http://www.smartouch-cdms.com/order.php?CompanyID=' + selr); } else alert("No selected row"); return false; }); });

  Read the article

• Best practices for developing simple ASP.NET sites (built in controls or JQuery + scripts)

  - by Nix

  I was recently reviewing some code written by two different contractors, both were basic ASP.NET management sites. The sites allowed the user to view and edit data. Pretty much simple CRUD gateways. One group did their best to use built in ASP + AJAX Toolkit controls and did their best to use as many built in controls as possible. I found the code much easier to read and maintain. The other used jQuery and the code is heavily marked up with script blocks which are then used to build pages from javascript files. Which one is more common? The one that basically leveraged embedded HTML markup in scripts controled by javascript files screams readability and maintenance issues? Is this just the way of doing asp dev with jQuery? Assuming the second example happens a lot, are there tools that help facilitate jQuery development with visual studio? Do you think they generated the html somewhere else and just copied it in? Example Script block: <script id="HRPanel" type="text/html"> <table cellpadding='0' cellspacing='0' class="atable"><thead class="mHeader"><tr><th>Name</th><th>Description</th><th>Other</th></thead><tbody> <# for(var i=0; i < hrRows.length; i++) { var r = HRRows[i]; #> <tr><td><#=r.Name#></td><td><#=r.Description#></td><td class="taRight"><#=r.Other#></td></tr> <#}#> </tbody><tfoot><th></th><th></th><th></th></tfoot></table> </script> Then in a separate location (js file) you would see something like this. $("#HRPanel").html($("#HRPanel").parseTemplate({ HRRows: response.something.bah.bah }));

  Read the article

< Previous Page | 440 441 442 443 444 445 446 447 448 449 450 451  | Next Page >