Search Results

Search found 45255 results on 1811 pages for 'php connect'.

Page 444/1811 | < Previous Page | 440 441 442 443 444 445 446 447 448 449 450 451  | Next Page >

• solr php extension fails to run on newest Debian Wheezy

  - by hijarian

  I'm trying to use the Solr PHP extension on the recently-upgraded Debian Wheezy. It installs both from PECL and from sources flawlessly but instead of giving me expected functionality it gives me this on every PHP run: PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20100525/solr.so' - /usr/lib/php5/20100525/solr.so: undefined symbol: curl_easy_getinfo in Unknown on line 0 Also scripts which use the extension throws an error PHP Error[2]: include(SolrClient.php): failed to open stream: No such file or directory in file <...path to my autoloader...> My main point is that it was set up before and worked like a charm. In the upgrade among the relevant packages only the versions of PHP and libcurl was changed. Instance of Solr itself was left as is. I have all possible libcurl libraries: $ locate libcurl ... /usr/lib/x86_64-linux-gnu/libcurl-gnutls.so.3 /usr/lib/x86_64-linux-gnu/libcurl-gnutls.so.4 /usr/lib/x86_64-linux-gnu/libcurl-gnutls.so.4.2.0 /usr/lib/x86_64-linux-gnu/libcurl.a /usr/lib/x86_64-linux-gnu/libcurl.la /usr/lib/x86_64-linux-gnu/libcurl.so /usr/lib/x86_64-linux-gnu/libcurl.so.3 /usr/lib/x86_64-linux-gnu/libcurl.so.4 /usr/lib/x86_64-linux-gnu/libcurl.so.4.2.0 ... /usr/lib32/libcurl.so.3 /usr/lib32/libcurl.so.4 /usr/lib32/libcurl.so.4.2.0 ... I have instaled the php5-curl package version 5.4.4-2 with aptitude. I installed the Sorl extensions both with sudo pecl install solr (with various combinations of -f and -n flags and tried solr-beta too) and with wget ... cd ... phpize ./configure make make install I'm installing the 1.0.2 version of extension because it worked before the upgrade from Squeeze to Wheezy. As I said earlier, extension installs without any errors. I have already added the extension=solr.so incantation to the /etc/php5/mods-available/solr.ini What magic should I do to make solr extension work? Is this true that the only solution that I have is to downgrade the libcurl version as it was before the upgrade?

  Read the article

• SQL Server 2008: Can't connect to remote server via management studio but can telnet in fine

  - by WarpKid

  Hi, I am in the process of trying to configure SQL Server 2008 to accept remote connections. I have been through all the documentation I can find and yet when I attempt to connect through management studio I get an error stating that the server could not be found. Interestingly I can connect through telnet to the remote server via the port that sql server is listening on. In the SQL Server logs I can see the connection attempt. So SQL Server is up and running and listening on the correct port - no firewall blocking it. It would appear that by default SQL Server is listening on port 50314 by default but management studio attempts to connect on port 1433.Weird. Server Management Studio = no dice. Anyone got any ideas? Server is set to allow remote connections - TCP IP is enabled, firewall is off. Thanks UPDATE FOR TO CLEAR THINGS UP A BIT We are seeing the connection attempt when we telnet in on port 50314 in the sql server logs. When we login through management studio we see it attempting connection on port 1433. There is no sign of this connection attempt in the logs.

  Read the article

• Can't connect to local MySQL server through socket

  - by Martin

  I was trying to tune the performance of a running mysql-server by running this command: mysqld_safe --key_buffer_size=64M --table_cache=256 --sort_buffer_size=4M --read_buffer_size=1M & After this i'm unable to connect mysql from the server where mysql is running. I get this error: ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (111) However, luckily i can still connect to mysql remotely. So all my webservers still have access to mysql and are running without any problems. Because of this though i don't want to try to restart the mysql server since that will probably mess everything up. Now i know that mysqld_safe is starting the mysql-server, and since the mysql server was already running i guess it's some kind of problem with two mysql servers running and listening to the same port. Is there some way to solve this problem without restarting the initial mysql server? UPDATE: This is what ps xa | grep "mysql" says: 11672 ? S 0:00 /bin/sh /usr/bin/mysqld_safe 11780 ? Sl 175:04 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --user=mysql --pid-file=/var/run/mysqld/mysqld.pid --socket=/var/run/mysqld/mysqld.sock --port=3306 11781 ? S 0:00 logger -t mysqld -p daemon.error 12432 pts/0 R+ 0:00 grep mysql

  Read the article

• Can’t connect to SQL Server 2008 - looks like Shared Memory problem

  - by user38556

  I am unable to connect to my local instance of SQL Server 2008 Express using SQL Server Management Studio. I believe the problem is related to a change I made to the connection protocols. Before the error occurred, I had Shared Memory enabled and Named Pipes and TCP/IP disabled. I then enabled both Named Pipes and TCP/IP, and this is when I started experiencing the problem. When I try to connect to the server with SSMS (with either my SQL server sysadmin login or with windows authentication), I get the following error message: A connection was successfully established with the server, but then an error occurred during the login process. (provider: Named Pipes Provider, error: 0 - No process is on the other end of the pipe.) (Microsoft SQL Server, Error: 233) Why is it returning a Named Pipes error? Why would it not just use Shared Memory, as this has a higher priority order in the list of connection protocols? It seems like it is not listening on Shared Memory for some reason? When I set Named Pipes to enabled and try to connect, I get the same error message. My windows account is does not have administrator priviliges on my computer - perhaps this is making a difference in some way (as some of the discussions in this post about an "SuperSocketNetLib\Lpc" registry key seems to suggest). I have tried restarting the SQL Server service, by the way, and also tried to get someone to log onto the machine with an admin account to restart the SQL Server service. Still no luck.

  Read the article

• Unable to connect remotely to Vsftpd server set up on CentOS VirtualBox

  - by ryekayo

  I have set up a Vsftp server using the following instructions provided Here and even went as far as following the commentary at the bottom. But I am unable to connect remotely. When I attempt to use FileZilla or my Ubuntu terminal, I always get: ryan@ryan-Galago-UltraPro:~$ ftp 10.0.x.xx ftp: connect: Connection timed out ftp> I have checked and re-checked iptables conf file and made sure that Port 21 is being Accepted and it is. I have looked this up on the web and decided to try nmap to port scan it and this is what I get for a result: ryan@ryan-Galago-UltraPro:~$ nmap -PN 10.0.xx.xx Starting Nmap 6.40 ( http://nmap.org ) at 2014-08-19 15:01 EDT Nmap scan report for 10.0.xx.xx Host is up. All 1000 scanned ports on 10.0.xx.xx are filtered Nmap done: 1 IP address (1 host up) scanned in 201.38 seconds Is there anything else that I should do or check for? UPDATE: I have tried to ping from the virtual machine to my IP address on Ubuntu and have been successfully able to. I cannot ping to my virtual machine from Ubuntu. I have narrowed this down to possibly being a firewall related issue on Ubuntu's side, but why would I be unable to connect from FileZilla?

  Read the article

• Prestashop is not saving Memcached settings

  - by ianenri

  I have a issue with the admin site of prestashop. I'm trying to activate the caching system but it doesn't save the setting. When I add a server (I'm using an Amazon ElasticCache server) saves it, but when I select the enable option and click Save, it redirects me to "Back Office Preferences Performance" but with a blank page and the admin tabs visible. I go back to those settings again and i see that the caching option is disabled. Also, there is a warning: "To use Memcached, you must install the Memcache PECL extension on your server. http://www.php.net/manual/en/memcache.installation.php" , even if i already installed memcached via yum. I tried also, by modifying the settings.inc.php file editing define('_PS_CACHE_ENABLED_', '0'); to: define('_PS_CACHE_ENABLED_', '1'); But i get 500 Internal Server Error in every page, so i prefer to leave it as before. Any ideas? I'm using PrestaShop 1.4.6.2 with Nginx 1.0.11 and PHP-FPM 5.3.8 in a CentOS 5.7 system.

  Read the article

• Using NginX and Apache alongside for both static and dynamic files

  - by faridv

  Background: I've searched a lot and found these useful threads about using of Apache or NginX for static or dynamic files. But they are old (mostly about 1 or 2 years ago) and I think both webservers, specifically Nginx has had important changes in performance and usage. So I think take another look on these issue cannot be that bad. Nginx (for static files) and Apache (for dynamic content)? nginx better than apache for dynamic content? [closed] Apache or NGINX for PHP? Nginx as reverse proxy to Apache with only dynamic content? My question: I have a PHP web application with lots of dynamic files and lots of static contents (videos, images etc.) and it's currently running on a CentOS 6 server and Apache 2.2 since 2 months ago. In past few days, number of our site visitors have gained so fast and I just thought if this number continues to increase with current ratio, we need to change many things (web server, application, etc.) to prevent failures. Because of hardware limitations that we are facing, I thought that it's best for us to start with web server. Should I start with something else? Should I try to increase performance of my PHP application and forget about web server for now? (even if gonna take a long time!) Because of huge usage of .htaccess files (for redirection, rewrites, etc.), I think it's gonna be painful to migrate to NginX as default web server or maybe only for dynamic files. Does this mean that I can't even use Nginx as reverse proxy? I'm not sure latest stable version of NginX and PHP-FPM have a better performance over my current Apache and my limitations (too many things) won't let me to give it a try. Which one is doing better currently? What will I lose by migrating to Nginx? To make it short, what should I do?

  Read the article

• How to connect to local instance of SQL Server 2008 Express

  - by Billy Logan

  I just installed SQL Server 2008 Express on my windows 7 machine. I previously had 2005 on here and used it just fine with the old SQL Server Management Studio Express. I was able to connect with no problems to my PC-NAME\SQLEXPRESS instance. I uninstalled 2005 and SQL Server Management Studio Express. I then installed SQL Server 2008 Express on my machine and elected to have it install SQL Server Management Studio. Now, when I try to connect to PC-NAME\SQLEXPRESS (with Windows Authentication, like I always did), I get the following message: Cannot connect to PC-NAME\SQLEXPRESS. A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-1&LinkId=20476 When I went to the help link it mentions, the help page suggests the following: * Make sure that the SQL Server Browser service is started on the server. * Use the SQL Server Surface Area Configuration tool to enable SQL Server to accept remote connections. For more information about the SQL Server Surface Area Configuration Tool, see Surface Area Configuration for Services and Connections. I did try starting the SQL Server Browser, but don't see that the Surface Area Configuration is installed with this express version. I had seen another user with an almost exact same issue that was missing the database engine on install. If that were the case how could i test for that and where would i go to download that install. Thanks in advance, Billy

  Read the article

• Postfix connect timing out remotely, working fine locally

  - by Moritz

  Running Postfix on Debian I cannot connect to send mail any more. It worked until approximately a week ago. I do not recall touching the configuration of the server during that time, which makes it difficult for me to find out what the problem is. When connecting from the server to itself it works fine: root@xxxx:~# telnet localhost 25 Trying 127.0.0.1... Connected to localhost.localdomain. Escape character is '^]'. ehlo localhost 220 mail.xxxx.de ESMTP Postfix (Debian/GNU) 250-mail.xxxx.de 250-PIPELINING 250-SIZE 10240000 250-VRFY 250-ETRN 250-STARTTLS 250-ENHANCEDSTATUSCODES 250-8BITMIME 250 DSN quit 221 2.0.0 Bye Connection closed by foreign host. Trying to do the same remotely times out: laptop:~ $ telnet mail.xxxx.de 25 Trying 93.xx.xx.xx... telnet: connect to address 93.xx.xx.xx: Operation timed out telnet: Unable to connect to remote host Configuration is as follows: root@xxxx:~# postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no broken_sasl_auth_clients = yes config_directory = /etc/postfix home_mailbox = Maildir/ inet_interfaces = all inet_protocols = ipv4 mailbox_command = mailbox_size_limit = 0 mydestination = localhost.localdomain, localhost.localdomain, localhost myhostname = mail.xxxx.de mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 myorigin = /etc/mailname readme_directory = no recipient_delimiter = + relayhost = smtp_tls_note_starttls_offer = yes smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtp_use_tls = yes smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,reject_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_exceptions_networks = $mynetworks smtpd_sasl_local_domain = smtpd_sasl_path = private/auth smtpd_sasl_security_options = noanonymous smtpd_sasl_type = dovecot smtpd_tls_CAfile = /etc/postfix/ssl/cacert.pem smtpd_tls_auth_only = no smtpd_tls_cert_file = /etc/postfix/ssl/smtpd.crt smtpd_tls_key_file = /etc/postfix/ssl/smtpd.key smtpd_tls_loglevel = 1 smtpd_tls_received_header = yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_tls_session_cache_timeout = 3600s smtpd_use_tls = yes tls_random_source = dev:/dev/urandom virtual_alias_maps = proxy:mysql:$config_directory/mysql_virtual_alias_maps.cf virtual_gid_maps = static:8 virtual_mailbox_base = /var/vmail virtual_mailbox_domains = proxy:mysql:$config_directory/mysql_virtual_domains_maps.cf virtual_mailbox_maps = proxy:mysql:$config_directory/mysql_virtual_mailbox_maps.cf virtual_minimum_uid = 150 virtual_transport = dovecot Receiving mails is no problem, as is retrieving them remotely. Do you have an idea what I could check next?

  Read the article

• Connect over WiFi to SQL Server from another computer

  - by Bronzato

  I tried to connect over WiFi to SQL Server with SQL Server Management Studio from another computer, but it failed. I have a computer with Windows 7 & SQL Server 2008 (lets say the server computer). Next to it I have a freshly installed computer with Windows 7 & SQL Server Management Studio (let's say the client computer). What I did on the server computer: Configure firewall by enabling port 1433 Enabled network protocols (TCP/IP) inside SQL Server Configuration Manager Checked Allow remote connections to this server in server properties in the SQL Server Management application. Started SQL Server Browser Restarted services (SQL Server Browser is stopped at this point, but I don't think it is necessary. Is it?) Next, I successfully tested a ping on the port 1433 from my client computer with a tool named tcping (ex: tcping 192.168.1.4 1433). But I still cannot connect from my client computer to SQL Server on my server computer. Ok, something new with this problem: Until now, I successfully connected to my "server computer" with Management Studio. What I did is type the computer name in the server name field in the connection window of Management Studio. My previous (failed) attempt was to type the computer name followed by the instance of SQL server (ex: COMPUTER_NAME\SQL2008). I don't know why I only have to type the computer name. Now my new challenge is to be successful in connecting my VB6 application to this remote database located on my "server computer". I have a connection string for this but it failed to connect. Here is my connection string: "Provider=SQLOLEDB.1;Password=mypassword;User ID=sa;Initial Catalog=TPB;Data Source=THIERRY-HP\SQL2008" Any idea what's going wrong?

  Read the article

• Setting up a localhost mail server on Mac OSX

  - by Thom

  I asked this over on stackoverflow. They pointed me here. I would love to be able to test php webapps that require emailing registration info etc. on my mac. I downloaded a version of CommuniGate Pro. I need to mail either to an account inside or outside (whichever is best) of the localhost. Again this would be used for testing purposes to verify and debug my code prior to uploading to a hosting service. Any ideas, help and/or examples would be very much appreciated. If it would be easier I could go over to Windows XP. That would just mean setting up wamp and transfering my files over from the mac side via dropbox. I got the local mailserver to work so I can send emails between accounts. However, I cannot seem to get the php code to work. I know that I am missing something. I see where this has been asked before. I want to add that I am using xampp. In Mac OS 10.6.8. I tried changing the php.ini SMTP command to macintosh-3.local. <?php function email($to, $subject, $body, $headers) { $headers = 'MIME-Version: 1.0' . "\r\n"; $headers .= 'From: <[email protected]>' . "\r\n"; mail($to, $subject, $body, $headers); } ?>

  Read the article

• Unable to connect to shared (iscsitarget) dvd-rw drive on ubuntu karmic box

  - by Develop7

  Intro I have desktop with DVD-RW drive that runs primarily on Linux (namely Ubuntu 9.10). My wife has netbook that rins Windows XP with no cd/dvd drive. There's also LAN through our ADSL modem/router. I've "ported" (actually, I've just grabbed sources and ran dpkg-buildpackage) iscsitarget package from Ubuntu Lucid to Karmic (here are packages), installed it (sudo aptitude install iscsitarget; sudo m-a a-i iscsitarget) and configured it in the following way (/etc/ietd.conf): Target iqn.2020-01.local.develop7-desktop:storage.disc.dvdrw Lun 0 Path=/dev/sr0,Type=blockio #I've skipped commented lines Also, I've opened port 3260 with ufw: $ sudo ufw status | grep 3260 3260 ALLOW 192.168.1.0/24 Problem But (here's the trouble) I still can't connect to this target from Windows box. Microsoft Software iSCSI Initiator screams "Logon failure" upon connect attempt, and, respectively, fails to connect. After unsuccessful connection attempt I've noticed this line in dmesg | tail's output: iscsi_trgt: ioctl(299) invalid ioctl cmd c078690d Question So the question is — what's wrong with my config/iSCSI target/whatever else? Or, in short — what I'm doing wrong? Thanks in advance.

  Read the article

• Can't connect to public WiFi with MacBookPro at coffee shops and libraries

  - by Nathan Bowers

  The Problem: I can't connect to public, unencrypted WiFi at my local public library or Peets Coffee. My Setup: Late 2006 MacBookPro running 10.5.8. I have Parallels installed. It's supposed to work like this: 1) Connect to their unencrypted WiFi network 2) Open a browser which redirects you to their "enter password/agree to terms" page. 3) Browse normally. I can connect to the WiFi network, but when I try to authenticate I always get stuck in a redirect loop. It's been like this for a while. Even before I upgraded to 10.5.8. I never have trouble with encrypted networks or regular open WiFi. What I've tried: Disabling Parallels connections in Network Prefs. Superstition: somehow Parallels installed something in the network stack that's messing me up. Pinging the IP address of the WiFi node I'm connected to. I can ping it, it's there, but I still get stuck in this authentication redirect loop. Tried different browsers, tried different cookie and security settings. Even tried IE under Parallels. No dice. Tried flushing DNS cache. Asked library and coffee employees for help. It didn't go well. My Question: Anybody else have this problem? What should I be looking for?

  Read the article

• Custom flash uploader breaks only on Media Temple

  - by LaserWolf

  I've built a flash uploader to upload files up to 100MB using a php backend. It works wonderfully on our dev server, on a hostgator vps, and on one of our clients' servers running Debian. It will not work on our Media Temple (dv)3.5 and I don't know why. The upload will start but will choke after a few seconds with this flash error message: ioerror: [IOErrorEvent type="ioError" bubbles=false cancelable=false eventPhase=2 text="Error #2038: File I/O Error. URL: http://..._upload.php"] The problem seems to be specific to the asynchronous nature of the flash uploader because if I try a straight php upload it works fine. The php.ini settings are set to allow such a large upload as well. Also, I've thoroughly googled flash, 2038, I/O error, etc but have yet to find anything that helped. Here's the weird part though: We work in Seattle. It won't work from the office. It won't work from home. But, while on the phone with MT's support, they were able to upload a file through our flash uploader just fine. I'm not sure where his office was located but I think it was Atlanta. So the problem also seems specific to physical location. Has anyone run into this sort of problem before?

  Read the article

• Cannot perform a PECL installation

  - by Petrusa

  I have been trying to do a few PECL installations, but all of them return the same type of error. Something related to timezones? Im running RedHat x86_64 es5. Attempting to install geoip-1.0.7: root@server [~]# pecl install geoip-1.0.7 downloading geoip-1.0.7.tgz ... Starting to download geoip-1.0.7.tgz (9,416 bytes) .....done: 9,416 bytes Warning: strtotime(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/Chicago' for 'CST/-6.0/no DST' instead in PEAR/Validate.php on line 489 Warning: strtotime(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/Chicago' for 'CST/-6.0/no DST' instead in /usr/local/lib/php/PEAR/Validate.php on line 489 3 source files, building running: phpize Configuring for: PHP Api Version: 20090626 Zend Module Api No: 20090626 Zend Extension Api No: 220090626 building in /var/tmp/pear-build-root/geoip-1.0.7 running: /root/tmp/pear/geoip/configure checking for egrep... grep -E checking for a sed that does not truncate output... /bin/sed checking for cc... cc checking for C compiler default output file name... a.out checking whether the C compiler works... configure: error: cannot run C compiled programs. If you meant to cross compile, use `--host'. See `config.log' for more details. ERROR: `/root/tmp/pear/geoip/configure' failed What is going on? Anyone that could assist please...

  Read the article

• How have I locked me out from my Ubuntu VPS?

  - by Sanoj

  I have a Ubuntu Server as VPS (OpenVZ), and yesterday I installed php-fpm, but I guess something went wrong with the installation. Because since then I cannot log in to my server over SSH with PuTTY or using WinSCP. The message I get when connecting is Network error: Connection timed out. Immediately after the installation I was not able to use emacs either, I had to re-install it with apt-get install emacs. I have tried with clearing the firewall and rebooting the server from my web-based "control panel", but it doesn't help. The commands I used for installation of the PHP-fpm was from Installing PHP 5.3, Nginx And PHP-fpm On Ubuntu/Debian. And I guess it has something to do with these commands: cd /tmp wget http://us.archive.ubuntu.com/ubuntu/pool/main/k/krb5/libkrb53_1.6.dfsg.4~beta1-5ubuntu2_i386.deb wget http://us.archive.ubuntu.com/ubuntu/pool/main/i/icu/libicu38_3.8-6ubuntu0.2_i386.deb sudo dpkg -i *.deb sudo echo "deb http://php53.dotdeb.org stable all" >> /etc/apt/sources.list sudo apt-get update sudo apt-get install php5-cli php5-common php5-suhosin sudo apt-get install php5-fpm php5-cgi The web-sites that are hosted from my server works fine. Anyone that have the same experience or know how this could happen? I guess that I have to re-install Ubuntu Server from my "control panel" now, but I would like to avoid this situation in the future. Finally, I have backup on everything so nothing is lost if I have to re-install the machine.

  Read the article

• Strange Apache Webdav situation (OSX Will connect, Ubuntu will not)

  - by mewrei

  So basically my situation is that I have an Apache 2.2 webserver running on Linux on another box, and I have it configured to serve up webdav. Now here's the weird part, I can access the server just fine on my Mac using the "Connect to Server" dialog (even moved like 5GB of files over the connection). On my Ubuntu desktop cadaver will connect as well and allow me to browse. However when I try to use Xmarks (BYOS Edition) or the GNOME "Connect to Server" dialog, it gives me a 403 Forbidden error. My server does digest authentication if that makes any difference. Here's part of my apache2.conf file <VirtualHost *:80> DocumentRoot "/path" <Directory "/path"> Dav on AuthType Digest AuthName iTools AuthDigestDomain "/" AuthUserFile /path/to/WebDavUsers Options None AllowOverride None <LimitExcept GET HEAD OPTIONS> require valid-user </LimitExcept> Order allow,deny Allow from All </Directory> <Directory "/path/*/Public"> Options +Indexes </Directory> <Directory "/path/user"> <LimitExcept GET HEAD OPTIONS> require user user </LimitExcept> </Directory> </VirtualHost>

  Read the article

• Apache2: 400 Bad Reqeust with Rewrite Rules, nothing in error log?

  - by neezer

  This is driving me nuts. Background: I'm using the built-in Apache2 & PHP that comes with Mac OS X 10.6 I have a vhost setup as follows: NameVirtualHost *:81 <Directory "/Users/neezer/Sites/"> Options Indexes MultiViews AllowOverride None Order allow,deny Allow from all </Directory> <VirtualHost *:81> ServerName lobster.dev ServerAlias *.lobster.dev DocumentRoot /Users/neezer/Sites/lobster/www RewriteEngine On RewriteCond $1 !^(index\.php|resources|robots\.txt) RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.*)$ index.php/$1 [L,QSA] LogLevel debug ErrorLog /private/var/log/apache2/lobster_error </VirtualHost> This is in /private/etc/apache2/users/neezer.conf. My code in the lobster project is PHP with the CodeIgniter framework. Trying to load http://lobster.dev:81/ gives me: 400 Bad Request Normally, I'd go check my logs to see what caused it, yet my logs are empty! I looked in both /private/var/log/apache2/error_log and /private/var/log/apache2/lobster_error, and neither records ANY message relating to the 400. I have LogLevel set to debug in /private/etc/apache2/http.conf. Removing the rewrite rules gets rid of the error, but these same rules work on my MAMP host. I've double-checked and rewrite_module is loaded in my default Apache installation. My http.conf can be found here: https://gist.github.com/1057091 What gives? Let me know if you need any additional info. NOTE: I do NOT want to add the rewrite rules to .htaccess in the project directory (it's checked into a git repo and I don't want to touch it).

  Read the article

• Cannot Connect To VMWare Guest OS Using Either RDP or VNC

  - by Humanier

  Hi, I have a PC (Windows XP SP3) with VMWare Workstation 7 installed. The VMWare hosts Windows Server 2003 Enterprise Edition R2. RealVNC (4.1.3) is installed on both OS'es. Both of them use Hamachi2. Host OS (WinXP) also runs ZoneAlarm Firewall. Hamachi network is set as trusted. My goal is to allow RDP and VNC connections to be made to the guest OS (Windows Server 2003). Both options work absolutely fine if I connect from the host OS. However I have problems when other computers from our Hamachi network try to connect the guest OS (Win2K3). 1) RDP connections. RDP window opens, shows black content and after 15-20 seconds displays following error: http://lh6.ggpht.com/_yQhsRRimgKU/TArRrtiteQI/AAAAAAAABZA/e96za-y9wzo/rdp_error.JPG 2) RealVCN connections. Users are able to connect but all they see is a black screen inside VNC window. At the same their input (keystrokes or mouse moves/clicks) are visible when looking at the console window of the Win2K3. I really appreciate any ideas on how to resolve mentioned problems. Thank you in advance.

  Read the article

• Cannot Connect To VMWare Guest OS Using Either RDP or VNC

  - by Humanier

  Hi, I have a PC (Windows XP SP3) with VMWare Workstation 7 installed. The VMWare hosts Windows Server 2003 Enterprise Edition R2. RealVNC (4.1.3) is installed on both OS'es. Both of them use Hamachi2. Host OS (WinXP) also runs ZoneAlarm Firewall. Hamachi network is set as trusted. My goal is to allow RDP and VNC connections to be made to the guest OS (Windows Server 2003). Both options work absolutely fine if I connect from the host OS. However I have problems when other computers from our Hamachi network try to connect the guest OS (Win2K3). 1) RDP connections. RDP window opens, shows black content and after 15-20 seconds displays following error: http://lh6.ggpht.com/_yQhsRRimgKU/TArRrtiteQI/AAAAAAAABZA/e96za-y9wzo/rdp_error.JPG 2) RealVCN connections. Users are able to connect but all they see is a black screen inside VNC window. At the same their input (keystrokes or mouse moves/clicks) are visible when looking at the console window of the Win2K3. I really appreciate any ideas on how to resolve mentioned problems. Thank you in advance.

  Read the article

• Installing xampp on system that already have mysql

  - by Charith

  I'm rather new to PHP and xampp. I have a computer that has installed MySQL server and MySQL workbench as I was working with Java and NetBeans. Now I want to use my computer for developing PHP and other web stuff too. I installed xampp successfully. But when I'm trying to access phpMyAdmin, it gives me an error saying mysql server rejected its connection Actually I tried stopping my current MySQL service and installing it again. However xampp have a its own mysql server in its installation path too. I tried configuring config.inc.php to use my existing installation of MySQL which is on a separate path. But I failed. Can anyone please instruct me how to configure this xampp to use my existing MySQL server to do everything and ignore the installed one with itself? I don't want two MySQL services to run on my system and clash in future. I'll be glad if anyone can explain to me what is best to use when you're developing Java, PHP, C and all the stuff on the same machine. P.S.: I have been given a password for my existing MySQL sever (user = root) as we do it usually when installing MySQL alone.

  Read the article

• Website memory problem

  - by Toktik

  I have CentOS 5 installed on my server. I'm in VPS server. I have site where I have constant online ~150. First look on site looks OK. But when I go through links, sometimes I receive Out of memory PHP error. It looks like this Fatal error: Out of memory (allocated 36962304) (tried to allocate 7680 bytes) in /home/host/public_html/sites/all/modules/cck/modules/fieldgroup/fieldgroup.install on line 100 And always, not allocated memory is very small. In average I have 30% CPU load, 25% RAM load. So I think here is not a physical memory problem. My PHP memory limit was set to 1500MB. My apache error log looks like this [Thu Sep 30 17:48:59 2010] [error] [client 91.204.190.5] Out of memory, referer: http://www.host.com/17402 [Thu Sep 30 17:48:59 2010] [error] [client 91.204.190.5] Premature end of script headers: index.php, referer: http://www.host.com/17402 [Thu Sep 30 17:48:59 2010] [error] [client 91.204.190.5] Out of memory, referer: http://www.host.com/17402 [Thu Sep 30 17:48:59 2010] [error] [client 91.204.190.5] Premature end of script headers: index.php, referer: http://www.host.com/17402 [Thu Sep 30 17:49:00 2010] [error] [client 91.204.190.5] File does not exist: /home/host/public_html/favicon.ico Past I have not met with this on my server and the problem appeared itself. Besides this I'm receiving some server errors on mail. cpsrvd failed @ Fri Sep 24 16:45:20 2010. A restart was attempted automagically. Service Check Method: [tcp connect] Failure Reason: Unable to connect to port 2086 Same for tailwatchd. Support tried, and can't help me...

  Read the article

• Missing libcurl.so.3 on updating tp PHP 5.2.13

  - by exentric

  Hi, I am trying to update my PHP to 5.2.13 however when I tried running yum update, it gives me this dependency error. php-5.2.13-jason.1.i386 from utterramblings has depsolving problems --> Missing Dependency: libcurl.so.3 is needed by package php-5.2.13-jason.1.i386 (utterramblings) Error: Missing Dependency: libcurl.so.3 is needed by package php-cli-5.2.13-jason.1.i386 (utterramblings) Error: Missing Dependency: libcurl.so.3 is needed by package php-5.2.13-jason.1.i386 (utterramblings) I believe this problem has been caused by my updating libcurl some time ago (to version 7.16.4-8.el5) but I have no idea how to solve this dependency issue. Some time ago my friend asked me regarding missing libcurl.so.3 as well on running some script. Can't say I remember what but he did say he managed to solved it (at least on his end) so I paid no attention to the libcurl.so.3 issue anymore. But now when I try to update my PHP, this problem arises again. This however does indeed exist (and presumably what solved my friend's issue): /usr/lib/libcurl.so.3 Any thoughts on this matter? I'm using centOS 5.3, PHP 5.2.11 and on LightTPD. -Regards

  Read the article

• Debian can't connect to internet using LAN

  - by tampe125

  I have a headless Raspberry Pi using Debian Wheezy. I have a wifi dongle and if I connect my Raspberry using it, everything works fine: I can connect to the Internet, I can ping, I can update. However, if I get down my wifi and set up the lan interface, I lost my internet connection. I still can connect locally, using my laptop, but the connection doesn't exit (ie ping is not working). Some useful info: cat /etc/network/interfaces auto lo auto eth0 iface eth0 inet static address 192.168.0.105 netmask 255.255.255.0 gateway 192.168.0.1 ping www.google.com (nothing request timed out) ifconfig eth0 Link encap:Ethernet HWaddr b8:27:eb:a2:b5:20 inet addr:192.168.0.105 Bcast:192.168.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1130 errors:0 dropped:0 overruns:0 frame:0 TX packets:1116 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:97223 (94.9 KiB) TX bytes:146140 (142.7 KiB) ping 192.168.0.1 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. ^C --- 192.168.0.1 ping statistics --- 19 packets transmitted, 0 received, 100% packet loss, time 18007ms cat /etc/resolv.conf nameserver 8.8.8.8 netstat -r Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface default 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 192.168.0.0 * 255.255.255.0 U 0 0 0 eth0 well, I think that's all... Any ideas?

  Read the article

• Debian can't connect to internet using LAN

  - by tampe125

  I have a headless Raspberry Pi using Debian Wheezy. I have a wifi dongle and if I connect my Raspberry using it, everything works fine: I can connect to the Internet, I can ping, I can update. However, if I get down my wifi and set up the lan interface, I lost my internet connection. I still can connect to it locally, using my laptop, but the connection doesn't exit (ie ping is not working). Some useful info: cat /etc/network/interfaces auto lo auto eth0 iface eth0 inet static address 192.168.0.105 netmask 255.255.255.0 gateway 192.168.0.1 ping www.google.com (nothing request timed out) ifconfig eth0 Link encap:Ethernet HWaddr b8:27:eb:a2:b5:20 inet addr:192.168.0.105 Bcast:192.168.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1130 errors:0 dropped:0 overruns:0 frame:0 TX packets:1116 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:97223 (94.9 KiB) TX bytes:146140 (142.7 KiB) ping 192.168.0.1 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. ^C --- 192.168.0.1 ping statistics --- 19 packets transmitted, 0 received, 100% packet loss, time 18007ms cat /etc/resolv.conf nameserver 8.8.8.8 netstat -r Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface default 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 192.168.0.0 * 255.255.255.0 U 0 0 0 eth0 well, I think that's all... Any ideas?

  Read the article

< Previous Page | 440 441 442 443 444 445 446 447 448 449 450 451  | Next Page >