Search Results

Search found 15160 results on 607 pages for 'boot disk'.

Page 445/607 | < Previous Page | 441 442 443 444 445 446 447 448 449 450 451 452  | Next Page >

• Photoshop CS4 slowing down, need advice to improve speed.

  - by Pennf0lio

  Hi, I just recently experienced problem with my Photoshop, It seem that it is slowing down when I am doing graphics design. Big or small files ( from 20 x 20 inch 300 dpi of resolution to 800x600 72 resolution ) it is really slowing down. Particularly when I am panning to my project It just get stuck for a few seconds then back to normal with slow movement. Can you guess what's wrong? I have an updated antivirus and I don't think virus is causing it. other adobe suite is working fine just my photoshop. I am running in windows 7, using Intel Core2 Duo 2.40 Ghz and has an Installed Ram of 2 GB. My primary scratch disk has 21 Gigabyte left and the secondary has a 13.89 GB. I need a solution urgently. I am planning to reformat my computer just to resolve my problem.

  Read the article

• RAID0 array of USB 2 disks, both connected to a single hub. Any benefit?

  - by Josh

  I have two unused USB 2 drives. I wanted to stripe them in a RAID0 configuration for fast disk access for virtual machines. (I find running a VMware virtual machine off a USB2 drive to be painfully slow. Especially Windows Vista) If I have both USB drives attached to the same USB2 hub, will that negate any benefit I gain by creating a RAID0 array? That is to say, is the speed of USB2 the limiting factor or is the speed of the drives? Would I get better performance by attaching one or both drives directly to my computer?

  Read the article

• Windows 7 won't show SATA Hard Drive in My Computer

  - by Darth

  I have clean install of Windows 7 x64 with two SATA hard drives. When I open My Computer, I can see only the drive where Windows are installed (and all partitions), but I don't see the other one. When I go to disk manager, I can see that both drives are detected and the one that I don't see in My Computer is also marked as Primary, but when I right click, the Open and Browse are gray. I also checked drives with gparted on live Ubuntu and they both seem to work correctly, the second drive wasn't marked hidden or anything else. Before installing Windows 7, I had Windows XP, where both drives worked properly.

  Read the article

• What software supports full multisession CD burning on windows?

  - by dma_k

  I know, that beating Nero in this field is very difficult. I have looked through best software listed in wiki, also checked the related posts here and here: most of the software either allows you to create ISO image and/or burn the existing image. However I am interested in the following flow: Import previous session Add/rename/remove files and directories Burn new session UltraISO is very good in (1) and (2). But it cannot append a disk with new session. InfraRecorder/CDBurnerXP can do (1) (2) (3) but: InfraRecorder crashes when trying to import some Nero sessions CDBurnerXP does not allow to move files in previous session to another directories. Is anybody here happy with any other free software?

  Read the article

• Photo Management Software for OS X That Supports Multiple Library Locations

  - by Lance Rushing

  I'm looking at the possibility of changing our photo management software. Thinking about Aperture or Lightroom. And want to know if either supports: Having folders/libraries on separate harddrives/Volumes. Tolerates having network folders occasionally connected Snappy interface A solid enough piece of software as not to crash or behave weirdly. [ so the wife doesn't get stuck and have to call me ;) ] Background The wife is photographer and I'm the computer programmer. Our current setup is Picasa, with a "Recent/Working" folder on the local iMac harddrive, and "Archive" folders on NFS mounted Linux Server, Raid 5, for redundant and extra storage capacity. (the Linux server also syncs with Amazon's EC2) Picasa is doing OK, but I get annoyed when it doesn't do behave properly. Usually around issues when the Linux disk isn't mounted. And overall, I wish Picasa seemed a little more polished and snappier. Thanks, Lance

  Read the article

• reiserfsck --rebuild-tree failed: Not enough allocable blocks

  - by mojo

  I have a reiserfs volume that required a --rebuild-tree, but is currently failing to complete when I pass it --rebuild-tree. Here is the output that I receive when running it: reiserfsck 3.6.19 (2003 www.namesys.com) # reiserfsck --rebuild-tree started at Mon Oct 26 13:22:16 2009 # Pass 0: # Pass 0 The whole partition (7864320 blocks) is to be scanned Skipping 8450 blocks (super block, journal, bitmaps) 7855870 blocks will be read 0%....20%....40%....60%....80%....100% left 0, 9408 /sec 287884 directory entries were hashed with "r5" hash. "r5" hash is selected Flushing..finished Read blocks (but not data blocks) 7855870 Leaves among those 6105606 Objectids found 287892 Pass 1 (will try to insert 6105606 leaves): # Pass 1 Looking for allocable blocks .. finished 0%....20%....40%....60%....80%....Not enough allocable blocks, checking bitmap...there are 1 allocable blocks, btw out of disk space Aborted I can't mount it, and I can't fsck it. I've tried extending the volume, but that hasn't helped either.

  Read the article

• Intel cpu hyperthreading on or off for ibm db2?

  - by rtorti19

  Has anyone ever done any database performance comparisons with hyper-threading enabled vs disabled? We are running ibm db2 and I'm curious if anyone has an recommendations for enabling hyper-threading or not. With hyper-threading enabled it makes it quite difficult to do capacity planning for cpu usage. For example. "With 8 physical cores represented as 16 "threads" on the OS and a cpu-bound workload, does that mean when your cpu usage hit's 50% you are actually running at 100%." What real benefits do I gain with leaving hyper-threading enabled on an intel server running DB2? Does hyper-threading help if you're workload is truly disk IO bound? If so, up to what percentage? These are the types of questions I'm trying to answer. Any thoughts?

  Read the article

• decrypting AES files in an apache module?

  - by Tom H

  I have a client with a security policy compliance requirement to encrypt certain files on disk. The obvious way to do this is with Device-mapper and an AES crypto module However the current system is setup to generate individual files that are encrypted. What are my options for decrypting files on-the-fly in apache? I see that mod_ssl and mod_session_crypto do encryption/decryption or something similar but not exactly what I am after. I could imagine that a PerlSetOutputFilter would work with a suitable Perl script configured, and I also see mod_ext_filter so I could just fork a unix command and decrypt the file, but they both feel like a hack. I am kind of surprised that there is no mod_crypto available...or am I missing something obvious here? Presumably resource-wise the perl filter is the way to go?

  Read the article

• Trucrypt or any HDD encryption solution with a bypass?

  - by sorrrydoctorforlove

  Hello experts, in my environment here we have started using trucrypt to encrypt and protect our laptops that are being brought out of the office. The issue comes with the password, we can document the passwords and assign them to users but if they simply use the program to change the password, and then forget it we are in trouble. We backup our data to external locations so it should be fine, but is there any way to install a bypass to be able to boot the laptop or stpo users changing their password (while they have local admin access)? Or should we try another solution? thanks.

  Read the article

• WSUS setup on ADS Domain Controller VM

  - by NickC

  How should I setup sharing/directory permissions to allow the following to work: VMHost - Hyper-V partition (not part of domain) ADServer - Active Directory Domain Controller running as guest VM on VMHost \VMHost\Updates disk share for WSUS to put the updates and other local files Problem is what permissions do I need to give to \VMHost\Updates to allow WSUS to work with this directory to avoid "The WSUS content directory is not accessible" error which I am currently seeing. As far as I can tell WSUS runs as "domain/Network Service" account. Question is without adding VMHost to the domain how do I give that user appropriate permissions to this directory? Is there a way that VMHost can be told to trust ADServer and then be able to use users accounts from there? Sort of relates to my other post here: Win 2012 Domain controller VM, should the Hyper-V host be part of the domain? Thanks, Nick

  Read the article

• Hybrid drive not booting faster than a normal HD

  - by Nigel Trotter

  I have used Windows 7 to create an image of my existing standard 160GB HD and copied this image back to a bigger 500GB Seagate hybrid drive. After copying the image to the hybrid I had to resize the partition, which was fine but after rebooting a few times to "teach" the hybrid, I have no increase in boot speed. It still takes 20-25 seconds to close down and then over a minute to start up. Is this something to do with the way the image lays itself on the drive indiscriminately? Do I need to load the OS on the drive from scratch to get the benefits? My PC with an i5 processor, is using AHCI mode.

  Read the article

• RAID0 PROBLEM WITH A SONY SPORTING A NEW HDD

  - by redrock

  Sony Windows 7 PC. Originally had 2 x 300Gb HDD. One HDD completely pancaked so have replaced with a new 500Gb HDD. When both drives are connected the 300GB doesn't appear to be recognised as a 300Gb HDD as a seperate entity. BIOS sees it but the operating system only sees a total of 465GB of HD space. When both disks are attached unde disk management it shows one 465Gb as RAID 0 and the new drive as STxxxxxx 465Gb. My question I guess is what should I see in total HDD space and is this configured correctly as I thought I would see 2 seperate drives 1x500Gb and 1x300Gb. My customer insisted that prior to the HDD crash he saw 2 drives both registering as 300Gb (a c: and d: drive).

  Read the article

• Why does DBAN crash on my HDDs?

  - by John Watson

  I am using DBAN to erase HDD. DBAN is loaded from a CD and BIOS Boot order has been set to favour CD drive. On starting laptop, system boots from CD and DBAN interface can be seen. DBAN detects two storage devices, HDD and the SD Card. My HDD IS 320GB but DBAN says 298GB. It erases the SD card but when i try to erase HDD, it gives following error. DBAN finished with non-fatal errors. *ERROR /dev/sdb (process crash) *ERROR /dev/sda (process crash)

  Read the article

• How to fix White Screen of Death after updating iTunes?

  - by cust0s

  The other night I updated my iTunes to the latest version (through Software Update) when I came to turn on my computer I was greeted with the dreaded white screen of death. I use an early 2008 iMac 24". I've tried the basic things, unplugging/turning off accessories, trying to boot from the install disk, reseting pram, etc, etc. Still no luck and no change what-so-ever. All I've been able to ascertain that my keyboard still works (by ejecting). I should point out that I did recently replace my Hard drive with a Western Digital Black 500GB (though the computer is well out of warrenty) and I'm a little concerned that the problem could be the screen.

  Read the article

• How to create a bootable Ubuntu Linux (10.04) USB installation for Macintosh

  - by vdavidovski

  I tried searching the Internet, but could not find a decent tutorial explaining how to create a bootable Ubuntu Linux (10.04) USB installation that could be run not only on a PC but also on Macs and MacBook Pros. In addition, I tried refit, but ended with "Missing operating system" error. Here is basically the layout of my bootable under PC Ubuntu USB drive (using MBR): Partition 1 (ext3, bootable) - Ubuntu Linux 32 bit, contains also grub2 bootloader. Partition 2 (ext3) - Ubuntu Linux 64 bit. Partition 3 (fat32) - contains data. What would be the best way to enable this drive to boot under Mac OS X? And if refit has to be used, could I simply have one more partition on the USB drive containing it? Thanks!

  Read the article

• SBSMonitoring.mdf reached limit

  - by Bastien974

  I have SBS 08 Standart. I have some Error in my Event Viewer with MSSQL$SBSMONITORING Event id 1105, 1827: Could not allocate space for object 'dbo.EventLog'.'PK_EventLog' in database 'SBSMonitoring' because the 'PRIMARY' filegroup is full. Create disk space by deleting unneeded files, dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup. CREATE DATABASE or ALTER DATABASE failed because the resulting cumulative database size would exceed your licensed limit of 4096 MB per database. I tried to schrink the database, worked for SBSMonitoring_log.LDF but nothing for the SBSMonitoring.mdf, still 4096MB. I don't know how to reinstall the monitoring. Thanks for your help.

  Read the article

• Extract and install Word 2003 standalone without full CD

  - by pcampbell

  Given a proper Office 2003 CD, is it possible to extract just the files that are needed for one application... i.e. Word or Excel? Browsing the CD, you can see WORD11.MSI. The goal here is to extract just the necessary bits to install the one app. Disk space isn't the concern, but rather the larger question of 'is it possible' and how? Is it possible to copy those files from the CD to another location to allow the installation of just one application? What files would be required from the CD to accomplish this?

  Read the article

• Dell V105 printer and OS X 10.6

  - by James

  I am trying to get a Dell V105 printer to work with my iMac. It is running 10.6 and I have installed all the drivers on the Snow Leopard disk. I believe there is no official Dell driver but I have also heard the Dell printers are made by third parties that may sell the same printer under different names. There a quite a few Lexmark models that seem to look very similar and I have tried setting the driver to the 2600 series that looks very similar but that has not enabled me to print. Although it claims to give me the supply levels correctly. Can anyone help? Thanks for your time

  Read the article

• Does the advanced format tool bundled by manufacturers actually do anything which mkntfs doesn't?

  - by neurolysis

  I recently bought a new drive (specifically, a 2TB Samsung Spinpoint) that says on the label that it supports advanced format, and that I should download the tool from their site. Unless I'm missing something, mkntfs has always had its maximum sector size at 4096b: -s, --sector-size BYTES Specify the size of sectors in bytes. Valid sector size values are 256, 512, 1024, 2048 and 4096 bytes per sector. If omitted, mkntfs attempts to determine the sector-size automatically and if that fails a default of 512 bytes per sector is used. Will this tool on Samsung's site do anything other than format the drive in the same way doing mkntfs -s 4K /dev/sdb1 would do? To be specific, I'm intending to use this drive on a machine that will primarily run Windows XP, but I'd rather boot into Linux/BSD and format the disk manually than have bloated software. I do want to have the new AF style sectors though -- that's essential. So if I did the command above, would it have exactly the same effect as using the advanced format tool?

  Read the article

• Zero-channel RAID for High Performance MySQL Server (IBM ServeRAID 8k) : Any Experience/Recommendation?

  - by prs563

  We are getting this IBM rack mount server and it has this IBM ServeRAID8k storage controller with Zero-Channel RAID and 256MB battery backed cache. It can support RAID 10 which we need for our high performance MySQL server which will have 4 x 15000K RPM 300GB SAS HDD. This is mission-critical and we want as much bandwidth and performance. Is this a good card or should we replace with another IBM RAID card? IBM ServeRAID 8k SAS Controller option provides 256 MB of battery backed 533 MHz DDR2 standard power memory in a fixed mounting arrangement. The device attaches directly to IBM planar which can provide full RAID capability. Manufacturer IBM Manufacturer Part # 25R8064 Cost Central Item # 10025907 Product Description IBM ServeRAID 8k SAS - Storage controller (zero-channel RAID) - RAID 0, 1, 5, 6, 10, 1E Device Type Storage controller (zero-channel RAID) - plug-in module Buffer Size 256 MB Supported Devices Disk array (RAID) Max Storage Devices Qty 8 RAID Level RAID 0, RAID 1, RAID 5, RAID 6, RAID 10, RAID 1E Manufacturer Warranty 1 year warranty

  Read the article

• Dell poweredge 1850's - wont install os

  - by user1326789

  I have 3 of these dell 1850 rack servers. 1 has 3GB RAM and 2 73GB HDD's. 2 have 6GB RAM and each of them has 2 73GB HDD's. I am currently trying to install an os on them but when i boot with windows xp setup, it gives me an error saying no partition found. Now i have set these drives up in RAID on the server and i put them "online" so it should be working fine but they're not. Please assist me in installing an operating system on these, i have no clue as to if it's the BIOS or the RAID controller within it. Thanks in advance, -Matt.

  Read the article

• USB to IDE/SATA adapter

  - by unknown (google)

  I have an old IDE HDD that I am trying to pull files off of. I am using a USD to IDE/SATA adapter. I plug in the power and adapter plugs into the drive and it fires up. I plug the USB plug into my XP laptop and it installs the drivers. I can see USB Mass Storage Device under Device Manager. My problem is I can't see the drive in either Windows Explorer or under Disk Management under Computer Management. Not sure what I am doing wrong. Do I have to slave the old hdd? Do I have to make BIOS changes?

  Read the article

• Enabling DMA in pc with windows 7

  - by Mugen

  I was checking my pc settings using AIDA64 (supposed to be the successor for Everest - it basically shows you detailed hardware you currently have). For my ATA hard disk it shows the setting for DMA as "supported, disabled". But when I checked the windows setting I see that it is actually enabled. How can I find out which is correct? And if its disabled what do I do to enable it? Thanks for your help. Here are some screenshots for this:

  Read the article

• How do I disable aalert beeps

  - by wheresrhys

  My HP pavilion laptop is getting pretty old and the speakers no longer work properly. So I've disabled all audio devices, including disabling the light-touch volume controls at boot-up. The one sound still here that I can't get rid of is teh alert beep whenever there's an error. It's annoying at the best of times, but when your laptop has no other sounds at all it's intensly irritating! Nothing I chaneg in the windows settings or in the BIOS seems to have any effect. Any ideas how to switch them off?

  Read the article

• Toshiba Satellite error 10053A0000 when re installing windows xp home on an existing windows 7 [closed]

  - by Jayapal Chandran

  I had installed windows 7 for testing. Now i want to re-install windows xp home original. I am using the toshiba installation(recovery) disk. The installation process asked a few questions. I selected the option to retain other partitions and to delete only c drive. In the next step i got this error. http://web1.toshiba.ca/support//techsupport/tsbs/all/-tsb001404.htm So, what should i do to retain my files in d drive and only allow the installation to delete c drive?

  Read the article

< Previous Page | 441 442 443 444 445 446 447 448 449 450 451 452  | Next Page >