Search Results

Search found 21331 results on 854 pages for 'require once'.

Page 446/854 | < Previous Page | 442 443 444 445 446 447 448 449 450 451 452 453  | Next Page >

• Certain drives in RAID 5 set intermittently are not recognized

  - by hydroparadise

  I have a curious problem in that 1 (sometimes 2) drives do not get recognized in a RAID 5 set. The server is getting rather old at 5 to 6 years, but still seems to function well once the machine sees all drives. So that leaves me with three areas to consider: the motherboard, the SATA RAID card, or the individual hard drives themselves. I am leaning toward the RAID card, but have not had much dealings with RAID cards. What would cause individual drives not to be recognized in the set? If it was the card, I would think that it would be all or nothing. If it were a single drive, is it possible that it would only work sometimes? The only other thing to consider is that that they are different drives (Seagate and Western Digital) but all around 80 GB. SATA RAID controller is 3ware Escalade 8506-4LP Motherboard is a SuperMicro P4SPA+ Am open and available for more details if needed...

  Read the article

• Is SSD TRIM support still automatic in 12.10?

  - by dam

  Folks I had automatic TRIM working on my laptop running Ubuntu Precise. As in the TRIM guide I added discard to mount options in /etc/fstab, and hdparm --read-sector read 0s immediately after a rm && sync. Using the very same hardware, laptop and SSD, TRIM seems no longer to be automatic after upgrading to Quantal. I recognise the test in the guide I mentioned above may not necessarily work. SSD erase blocks and all that. But Quantal is at least different. After deleting the file and syncing, its data are still on disk and unerased even after waiting several minutes. fstrim will then 0 the dead file's blocks. Once. Repeat the same test five minutes later, and fstrim does nothing. I figure this is probably really a kernel issue, but that box is too black for my spelunking torch. I'm prepared to believe that kernel 3.5 knows what I want better than I do, and all is well despite appearances, but it looks for all the world like TRIM isn't quite all there any more. Anybody have the scoop on TRIM in Quantal/kernel 3.5?

  Read the article

• custom adm file for IE search providers on Windows 2003

  - by filipv

  Hi, I have been stumped by this issue for some time, I created a custom ADM template for a customer to populate the search providers in Internet Explorer 7 and 8. The custom ADM works fine and I have set 3 search providers, the problem is that I cannot change them (the customer wants to change the entry for wikipedia from EN to NL), I edited the ADM file but the clients seem to keep on using the old settings. Removing/replacing the adm file has no effect either, the settings remain. I used the following article as a base: http://support.microsoft.com/kb/918238 For IE8 you need to work with a name instead of a UID for the default entry, that works as expected. but there seems to be no way to change the setting once in place.

  Read the article

• PDF to HTML - batch converter - most reliable and accurate free AND paid for software?

  - by Rob

  I'm look for either a free or paid-for (about 50$/40pounds) BATCH PDF to HTML converter to convert several PDF files at once. Needs to be able to handle vectored and bitmap images within the file, outputting both as jpegs referenced by the html pages. I've tried iorigsoft paid-for PDF to HTML - problems it seems to hang or just go idle, and the stuff it actually converts have broken links - the wrong name is used for constituent chapters as html. Also tried application from intrapdf.com but this crashes near the beginning of the conversion, consitently. Looked at opensource tools but they look equally flakey or use old PDF versions. Need it on Windows 7 32bit home. Thoughts?

  Read the article

• How can Facebook's session get mixed up because of NAT and/or Proxy

  - by Alex

  Have received some reports from a customer (a very large company) they reported issues from clients who are using Facebook. These clients claim that once in a while when they log in to Facebook they end up in someone else's session. I know that network is NATed then Proxied before getting to Facebook.com. Although I'm not able to explain how this issue can occur. Is it possible that the Proxy is not sending the right session back to the clients? How can they end up with someone else's session since Facebook is cookie based session?? Anyone seen this before?

  Read the article

• If your algorithm is correct, does it matter how long it took you to write it?

  - by John Isaacks

  I recently found out that Facebook had a programming challenge that if completed correctly you automatically get a phone interview. There is a sample challenge that asks you to write an algorithm that can solve a Tower of Hanoi type problem. Given a number of pegs and discs, an initial and final configuration; Your algorithm must determine the fewest steps possible to get to the final configuration and output the steps. This sample challenge gives you a 45 minute time limit but allows you to still test your code to see if it passes once your time limit expires. I did not know of any cute math solution that could solve it, and I didn't want to look for one since I think that would be cheating. So I tried to solve the challenge the best I could on my own. I was able to make an algorithm that worked and passed. However, it took me over 4 hours to make, much longer than the 45 minute requirement. Since it took me so much longer than the allotted time, I have not attempted the actual challenge. This got me wondering though, in reality does it really matter that it took me that long? I mean is this a sign that I will not be able to get a job at a place like this (not just Facebook, but Google, Fog Creek, etc.) and need to lower my aspirations, or does the fact that I actually passed on my first attempt even though it took too long be taken as good?

  Read the article

• How can I read a portion of one Minecraft world file and write it into another?

  - by RapierMother

  I'm looking to read block data from one Minecraft world and write the data into certain places in another. I have a Minecraft world, let's say "TemplateWorld", and a 2D list of Point objects. I'm developing an application that should use the x and y values of these Points as x and z reference coordinates from which to read constant-sized areas of blocks from the TemplateWorld. It should then write these blocks into another Minecraft world at constant y coordinates, with x & z coordinates determined based on each Point's index in the 2D list. The issue is that, while I've found a decent amount of information online regarding Minecraft world formats, I haven't found what I really need: more of a breakdown by hex address of where/what everything is. For example, I could have the TemplateWorld actually be a .schematic file rather than a world; I just need to be able to read the bytes of the file, know that the actual block data starts always at a certain address (or after a certain instance of FF, etc.), and how it's stored. Once I know that, it's easy as pie to just read the bytes and store them.

  Read the article

• Bios Memory settings and Virtualization + Ubuntu (Unofficial Answers Welcome) [closed]

  - by TardisGuy

  Attempting to optimize my (Main Windowless) Ubuntu system for my uses I will detail questions below, I understand this might be the wrong place to ask these questions. If so, my apologies and I thank you so much for your patience. Thanks to all the volenteers that have helped me learn ubuntu over the years (Since 5.10) This is a "short" list of questions I have been trying to figure out for some time. If you feel you can answer one but not another, that's already more than I could ask for. I have wrote this up in a format for easy navigation to important points Hopefully to less annoy your eyes. You're welcome :) or i'm sorry i annoy you. :( If you would be so kind, Please format answers as follows: question 1: _ _ _ _ _ or question 1-a: _ _ _ _ _ If you want to simply link me to relevant information, rather than type up something really detailed; that would be more than awesome! Memory Specific Questions Goal: Maximizing memory bandwith to better perform in Virtualization, and Large file compression. (Possible conflict?) Ganged vs Unganged "which is better?"** is relative, i know. But what about ganged vs unganged - With or without Bank/channel interleaving? a: Speculation - If i understand correctly, "channel interleaving has something to do with using both channels to read or write in a kind of "striping" pattern, as opposed to a standard half duplex operation.(probably wrong) but wouldn't ganged channels make this irrelevant? Memory Interleaving(bank). Does it have a down side? Does it require a ratio of clocks? (If I run 4x4gig ddr3) a. If im reading correctly(trying to learn), this is designed to spread operations between latency cycles to work around the higher latency of "normal" operation. b. However it seems to me that it has to be: divisible by fractions of a master clock? So if i run memory at 1333mhz, then the mean between 2 (physical) banks would operate every (roughly) 600Mhz? Warning! Possibly utter nonsense: (1333/2 interleaving to act like 1 memory module per 2 sticks of a total of 4 sticks, meaning 2x channels@4) c. which makes me wonder if there would be left over clock cycles the system would have to... "truncate/balance" or something? But I'm certain theres a feature somewhere i don't understand. Virtualization Questions AMD-V - Option of IOMMU Turned it on, why do i have extra option of "64MB"? If IOMMU is on, but "64MB" is "disabled", Is it on? (have scoured google, I still dont know) a. I think i understand that its supposed to (kind of) "set aside" a part of ram to act as a faster interactive zone for "stuff" (usb, Graphics, and... what?) b. I am using Nvidia graphics on AMD (Used kernel option "iommu=pt iommu=1, pt "passthrough"? No idea what they do, found it on google to solve boot up issue) c. Will this option help me use low latency sound hardware, like my midi keyboard? Can you recommend any additional tweaks? a. sysctl settings? b. swap settings? Grats, youve reached the end. Thanks for Reading.

  Read the article

• In Windows XP, is it possible to disable user credential caching for particular users

  - by kdt

  I understand that when windows caches user credentials, these can sometimes be used by malicious parties to access other machines once a machine containing cached credentials is compromised, a method known as "pass the hash"[1]. For this reason I would like to get control over what's cached to reduce the risk of cached credentials being used maliciously. It is possible to prevent all caching by zeroing HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\CachedLogonsCount, but this is too indiscriminate: laptops users need to be able to login when away from the network. What I would like to do is prevent the caching of credentials of certain users, such as administrators -- is there any way to do that in Windows XP? http://www.lbl.gov/cyber/systems/pass-the-hash.html

  Read the article

• Does Exchange support plussed users (e.g. [email protected]) or a similar mechanism?

  - by Jens Bannmann

  Sendmail supports a feature called 'plussed users'. Once enabled, emails sent to [email protected], [email protected] and [email protected] are automatically delivered just like mails to [email protected]. There is no need to register or set up these 'plus suffixes'. The user can just use them and set up client-side filtering rules on his own. Does Exchange support a similar mechanism? If so, how to enable it? Note that I don't want answers about other means of filtering, e.g. spam/junk filtering, server-side or client-side rules, email aliases/addresses that are configured explicitly and so on.

  Read the article

• How will closures in Java impact the Java Community?

  - by Ryan Delucchi

  It is one of the most talked about features planned for Java: Closures. Many of us have been longing for them. Some of us (including I) have grown a bit impatient and have turned to scripting languages to fill the void. But, once closures have finally arrived to Java: how will they effect the Java Community? Will the advancement of VM-targetted scripting languages slow to a crawl, stay the same, or acclerate? Will people flock to the new closure syntax, thus turning Java code-bases all-around into more functionally structured implementations? Will we only see closures sprinkled in Java throughout? What will be the effect on tool/IDE support? How about performance? And finally, what will it mean for Java's continued adoption, as a language, compared with other languages that are rising in popularity? To provide an example of one of the latest proposed Java Closure syntax specs: public interface StringOperation { String invoke(String s); } // ... (new StringOperation() { public invoke(String s) { new StringBuilder(s).reverse().toString(); } }).invoke("abcd"); would become ... String reversed = { String s => new StringBuilder(s).reverse().toString() }.invoke("abcd"); [source: http://tronicek.blogspot.com/2007/12/closures-closure-is-form-of-anonymous_28.html]

  Read the article

• Tool that automatically keeps old versions of a file? Shadow Copy in Win7?

  - by Michael Stum

  When I'm working with a Graphics App, I press CTRL+S a lot to Quicksave. Sometimes, I just went too far and made a bad decision, sometimes to the point Undo wouldn't help either. I would love to retain old versions of a file. Normally, Source Control would be of use here, but that's a manual process (same as just making some copies). I wonder if there is an automatic way to do that? Everytime the file changes, keep a backup. I believe that in Windows Server, Shadow Copies can do that. When I check in my Windows 7 (Ultimate), I do see "Previous Versions" as a tab, but that seems to be part of the backup function which is once again manual. Is there a way to get that type of automatic versioning?

  Read the article

• accidentally concatenate a large file on a remote system

  - by Dan

  Every once in a while on a computer I'm ssh'd into, I will accidentally type "cat largefile.txt" and my screen will start rushing with text for the next 10 minutes. I'm always working in a screen session, so my current solution is to just log out and then log back in, and since it can go 100X faster when I'm logged out, it'll finish in the short time it takes me to type my password in again. Is there a better way? Either involving the fact I'm in a screen session? Or a way to do this within SSH? What doesn't work: detaching from the screen session (doesn't respond until file is done outputting) trying command to move to a different window in the screen session (also doesn't respond) typing ctrl+C to kill cat command (also doesn't respond, probably because the command is done and the buffers just have to catch up)

  Read the article

• Data breakpoints to find points where data gets broken

  - by raccoon_tim

  When working with a large code base, finding reasons for bizarre bugs can often be like finding a needle in a hay stack. Finding out why an object gets corrupted without no apparent reason can be quite daunting, especially when it seems to happen randomly and totally out of context. Scenario Take the following scenario as an example. You have defined the a class that contains an array of characters that is 256 characters long. You now implement a method for filling this buffer with a string passed as an argument. At this point you mistakenly expect the buffer to be 256 characters long. At some point you notice that you require another character buffer and you add that after the previous one in the class definition. You now figure that you don’t need the 256 characters that the first member can hold and you shorten that to 128 to conserve space. At this point you should start thinking that you also have to modify the method defined above to safeguard against buffer overflow. It so happens, however, that in this not so perfect world this does not cross your mind. Buffer overflow is one of the most frequent sources for errors in a piece of software and often one of the most difficult ones to detect, especially when data is read from an outside source. Many mass copy functions provided by the C run-time provide versions that have boundary checking (defined with the _s suffix) but they can not guard against hard coded buffer lengths that at some point get changed. Finding the bug Getting back to the scenario, you’re now wondering why does the second string get modified with data that makes no sense at all. Luckily, Visual Studio provides you with a tool to help you with finding just these kinds of errors. It’s called data breakpoints. To add a data breakpoint, you first run your application in debug mode or attach to it in the usual way, and then go to Debug, select New Breakpoint and New Data Breakpoint. In the popup that opens, you can type in the memory address and the amount of bytes you wish to monitor. You can also use an expression here, but it’s often difficult to come up with an expression for data in an object allocated on the heap when not in the context of a certain stack frame. There are a couple of things to note about data breakpoints, however. First of all, Visual Studio supports a maximum of four data breakpoints at any given time. Another important thing to notice is that some C run-time functions modify memory in kernel space which does not trigger the data breakpoint. For instance, calling ReadFile on a buffer that is monitored by a data breakpoint will not trigger the breakpoint. The application will now break at the address you specified it to. Often you might immediately spot the issue but the very least this feature can do is point you in the right direction in search for the real reason why the memory gets inadvertently modified. Conclusions Data breakpoints are a great feature, especially when doing a lot of low level operations where multiple locations modify the same data. With the exception of some special cases, like kernel memory modification, you can use it whenever you need to check when memory at a certain location gets changed on purpose or inadvertently.

  Read the article

• Same SCSI drive appears multiple times on the controller list

  - by ohad

  Hi, I have an Adaptec AHA-2940UW SCSI adapter, to which I connected a single Atlas 10K III drive (and nothing more). When my computer loads up, the pre-OS Adaptec screen shows (I believe this is called the POST screen), where I can see the Atlas drive listed many times (i.e. with ID0, ID1, ... ID5, ID7, ID8,...,ID15 [ID6 is the adapter itself]) Using the same HD on an Adaptec AHA-2940UB the disk only shows once Since my OS hasn't been installed yet, I'm not sure if this is a problem (I would guess it is), and if so - how to solve it. Termination and multiple LUNs come mind, but the cable provides termination and I don't see why a hard drive would request multiple LUNs, especially considering it is not jumpered at all, and multuple LUN support is disabled in the Adaptec controller BIOS (via the SCSISelect utility) Thank you

  Read the article

• Need Help Debugging BSOD

  - by nmuntz

  For the last few days I've been getting a BSOD at least once a day. Apparently the crash has been caused by ntkrpamp.exe and searching on google has revealed that the issue seems to be related to bad RAM. I have run memtest and my RAM modules have no errors on them. I'm pretty sure the issue is related to drivers, but I can't figure out which one. I'm not an expert in interpreting the output of windbg so any pointers would be greatly appreciated. Here is my analysis with WinDbg. It was too long to paste it here. One strange thing i noticed is that my Windows XP is in Spanish (SP3) and ntkrpamp.exe copyright info seems to be in portuguese. Not sure if that could be an issue, perhaps i have the wrong ntkrpamp.exe... Thanks a lot in advance

  Read the article

• How does this circle collision detection math work?

  - by Griffin

  I'm going through the wildbunny blog to learn about collision detection. I'm confused about how the vectors he's talking about come into play. Here's the part that confuses me: p = ||A-B|| – (r1+r2) The two spheres are penetrating by distance p. We would also like the penetration vector so that we can correct the penetration once we discover it. This is the vector that moves both circles to the point where they just touch, correcting the penetration. Importantly it is not only just a vector that does this, it is the only vector which corrects the penetration by moving the minimum amount. This is important because we only want to correct the error, not introduce more by moving too much when we correct, or too little. N = (A-B) / ||A-B|| P = N*p Here we have calculated the normalised vector N between the two centres and the penetration vector P by multiplying our unit direction by the penetration distance. I understand that p is the distance by which the circles penetrate, but I don't get what exactly N and P are. It seems to me N is just the coordinates of the 3rd point of the right trianlge formed by point A and B (A-B) then being divided by the hypotenuse of that triangle or distance between A and B (||A-B||). What's the significance of this? Also, what is the penetration vector used for? It seems to me like a movement that one of the circles would perform to get un-penetrated.

  Read the article

• ksoftirqd uses 100% cpu

  - by andy

  I am running 32bit Ubuntu 10.04. A lot of the times ksoftirqd/0 or ksoftirqd/1 start using up 100% CPU for no apparent reason, and I am forced to reboot my laptop. Incidentally this also happens when I maximize my (youtube) videos on Chrome and Fireox, but once I un-maximize the videos the CPU usage goes down to the original levels. Any ideas what it going on? --- Addendum --- dmesg produces a ~2000 line output. I searched for 'error' and 'warning' in the output, and here are the relevant lines (along with some headers): [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-21-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:09:38 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=UUID=157dcfda-acd6-4d1b-a6a8-ff9ccff61906 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 24.775546] EXT3-fs warning: mounting fs with errors, running e2fsck is recommended [44920.210518] ata1: SError: { PHYRdyChg CommWake 10B8B Dispar LinkSeq TrStaTrns } [44920.210531] res 40/00:00:f0:4b:7f/00:00:18:00:00/40 Emask 0x10 (ATA bus error) [58673.134623] chrome[20101]: segfault at 7f38bc4ad000 ip 00007f38be769ecc sp 00007fff24616850 error 4 in libpepflashplayer.so[7f38bdc08000+e55000] [ 24.775546] EXT3-fs warning: mounting fs with errors, running e2fsck is recommended [44920.210531] res 40/00:00:f0:4b:7f/00:00:18:00:00/40 Emask 0x10 (ATA bus error)

  Read the article

• Unity in 12.10 comes up behind other windows

  - by ams

  I've just upgraded from 12.04 to 12.10. For the most part, everything works fine, but I have a few small problems with Unity, or maybe Compiz. When I hit the Super key, or click on the dash launcher, the dash sometimes comes up behind the other windows on the screen. As you can imagine, this makes it somewhat tricky to use. Once it has started coming up behind, no amount of trying again will convince it to come back to the front. Possibly related, the Alt-Tab switcher doesn't show either. It maybe that there isn't one, or maybe that's behind also? Alt-Tab does switch the windows, but there's no visual indicator. When I hit Super-W, the windows do all do the zoom thing, but it's slow and juddery where it used to be smooth in 12.04. I'm using the standard "radeon" driver, same as before, with a triple-head monitor setup (and that works fine). I've not tried the proprietary drivers as I've previously found the multi-monitor support much weaker than the default driver, but maybe that's the way to go now? Video play fine. Even WebGL seems ok. Do other see this problem? Is it a bug? Or have I just got some left-over config from 12.04 in the way?

  Read the article

• My internet connection slows or dies unexpectedly

  - by genesis

  I installed Ubuntu 10.04 once again and I'm having some problems which I had before, but I have no idea how I solved them. On Windows, everything's working fine and I had no problems with this. My problem is that sometimes, when browsing through the internet, webpages just start to load really slow, sometimes it doesn't load anything at all (Error 118 (net::ERR_CONNECTION_TIMED_OUT): The operation timed out.) and it starts to work after few minutes. My IPv4 settings are automatic (DHCP), and IPv6 settings are Ignored/Disabled. I think my previous problems had something to do with IPv6, but I'm not sure. Is there a fix for this? iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"Fsite1" Mode:Managed Frequency:2.442 GHz Access Point: C8:3A:35:40:43:68 Bit Rate=0 kb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on Link Quality=43/70 Signal level=-67 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0

  Read the article

• Keep cube spinning after fling

  - by Zero

  So I've been trying to get started with game development for Android using Unity3D. For my first project I've made a simple cube that you can spin using touch. For that I have the following code: using UnityEngine; using System.Collections; public class TouchScript : MonoBehaviour { float speed = 0.4f; bool canRotate = false; Transform cachedTransform; public bool CanRotate { get { return canRotate; } private set { canRotate = value; } } void Start () { // Make reference to transform cachedTransform = transform; } // Update is called once per frame void Update () { if (Input.touchCount > 0) { Touch touch = Input.GetTouch (0); // Switch through touch events switch (Input.GetTouch (0).phase) { case TouchPhase.Began: if (VerifyTouch (touch)) CanRotate = true; break; case TouchPhase.Moved: if (CanRotate) RotateObject (touch); break; case TouchPhase.Ended: CanRotate = false; break; } } } bool VerifyTouch (Touch touch) { Ray ray = Camera.main.ScreenPointToRay (touch.position); RaycastHit hit; // Check if there is a collider attached already, otherwise add one on the fly if (collider == null) gameObject.AddComponent (typeof(BoxCollider)); if (Physics.Raycast (ray, out hit)) { if (hit.collider.gameObject == this.gameObject) return true; } return false; } void RotateObject (Touch touch) { cachedTransform.Rotate (new Vector3 (touch.deltaPosition.y, -touch.deltaPosition.x, 0) * speed, Space.World); } } The above code works fine. However, I'm wondering how I can keep the cube spinning after the user lifts his finger. The user should be able to "fling" the cube, which would keep spinning and after a while would slowly come to a stop due to drag. Should I do this using AddForce or something? I'm really new to this stuff so I'd like it if you guys could point me in the right direction here :) .

  Read the article

• Windows 8 gives "system thread exception not handled" after update

  - by Shobhit

  I have a 64-bit dell laptop which I recently upgraded from Windows 7 to Windows 8. Since then, it's creating a havoc in my life. The metro apps are not working; the system crashes once in a while and none of my games are running because I don't have the correct drivers for my graphics card (ATI 5000 series). Some days back, Windows downloaded an update and prompted me to restart. After that day, whenever I log in and fire up my desktop, I get all kinds of blue screen errors. The most common one looks something like this: - SYSTEM_THREAD_EXCEPTION_NOT_HANDLED. Please help me with how I can fix this, optionally how to go back to windows 7. Thanks.

  Read the article

• Ubuntu 13.10 Unity doesn't load after upgrade

  - by William

  Just upgraded to Ubuntu 13.10 only to find that Unity won't load (login freezes, after doing ctrl+alt+F1, logging in and then doing startx, I get a blank desktop and the mouse pointer, and nothing else). I can right click, but the only operations that work are "create new file" and "create new folder". For example, "change desktop background" doesn't work. Also, after doing a few right clicks and choosing "change desktop background", I get a warning message box: "compiz closed unexpectedly." Guest login works fine. Tried creating a new user, but I experience the same thing with the new user. Tried removing all configuration files from my home directory... same thing. Doing dconf reset -f /org/compiz/ gives an error "error spawning command line..." Doing unity --reset also gives errors. Tried uninstalling unity (and compiz) and reinstalling, but that doesn't help. Tried reconfiguring lightdm, didn't help. I don't have any proprietary drivers installed. Once again, the funny thing is that the guest session works fine.

  Read the article

• Best practice, or generally best way to set up web-hosting server, permissions, etc.

  - by Jagot

  Hi, I'm about to set up a server upon which a friend and I will be hosting web sites, and I'll be using Debian. I've set up a LAMP solution many times just to using for local testing purposes, but never for actual production use. I was wondering what are the best practices are in terms of setting the server up, in reference specifically to accessing the web root directory. A couple of the options I have seen: Set up a single user account on the server for us both to use and use a virtual host to point to the somewhere in the home directory, e.g. /home/webdev/www. Set each of us up a user account, and grant permissions in some way to /var/www (What would be the best way? Set up a new group?) I want to get this right when I first set this up as there won't be any going back for a while once our first site is up and running. Appreciate any guidance in advance.

  Read the article

• How to have a soft-real-time process in presense of heavily swapping IO-intensive background load?

  - by Vi

  schedtool: PID 32301: PRIO 4, POLICY R: SCHED_RR , NICE -20, AFFINITY 0xf ionice: realtime: prio 4 But the music is stumbling anyway. Background load is low prio (SCHED_IDLEPRIO, idle ionice), but uses a lot of memory (more than is physically available) and does a lot of IO and calculations. Latencytop shows about 1500ms for: Following symlink Writing buffer to disk (sync) Page fault Writing a page to disk both for the bg load and for unrelated processes. Load average is 10 and counting. Why cannot it allocate, for example, 200MHZ of one of the cores and 32M of memory and not less than once per second opportunity for IO for mplayer to make it happy while continuing calculations on the background? Or: why it cannot leave background task and swap loving each other but keeping the rest of the system as if there were no background load? How to have RT processes AND heavy bg load simultaneously (without of virtual machines)?

  Read the article

< Previous Page | 442 443 444 445 446 447 448 449 450 451 452 453  | Next Page >