Search Results

Search found 44476 results on 1780 pages for 'wcf test client'.

Page 446/1780 | < Previous Page | 442 443 444 445 446 447 448 449 450 451 452 453  | Next Page >

• Can I recover a zpool after it's been exported, given that devices have not been reallocated?

  - by cali-spc

  I had a zpool we'll call 'testpool'. testpool had 3 devices included in it, and a single zfs called 'test'. I needed to move 'test' to a new, smaller pool. I wanted to name the new pool the same name 'testpool'. Basically did the following. zfs send testpool@backup > /tmp/test-dump zpool export -f testpool zpool create -f testpool newdevice zfs receive -F testpool < /tmp/test-dump Unfortunately I found out that the testpool@backup snapshot was the wrong snapshot. Too old. I have yet to reallocate the three devices that were in the OLD testpool. (None of these 3 devices are 'newdevice', they are a separate 3.) Is there any way I can recover data in those devices? I'm thinking since I named the new, smaller pool the same as the old zpool, I'm pretty much SOL. But if not, that would be nice to know. Edit: More info I did a 'zpool import' and got this. bash-3.00# zpool import pool: testpool id: 14781458723915654709 state: ONLINE action: The pool can be imported using its name or numeric identifier. config: testpool ONLINE c5t8d0 ONLINE c5t9d0 ONLINE c5t10d0 ONLINE So I'm guessing I just need the syntax to import this zpool using its numeric identifier, while giving it a new name. S.

  Read the article

• hp proliant dl360 disk diagnostic issue

  - by user1039384

  We recently got two used drives (15000) and installed on our HP proliant dl360 G5 server. Created RAID1 and used HP SmartStart CD to perform diagnostics. Interestingly, the Diagnostic tab immidiately fails on Logical drive testing saying the Disk1 should be replaced, while the Test tab successfully runs all the complete tests on both disks and does not find any issue. At the meantime, when booting to esxi 5, vSphere periodically shows the Disk1 as Unknown and Logical drive in recovery process. This happens every 5-10 minutes. Here is the log from HP SmartScan diagnostic: 1 - Device, Test: Logical Drive 1, Storage Controller in Slot 0 1 - Description: The controller has reported a critical error in the drive error log. 1 - Recommended Repair: This drive should be replaced. 1 - Failed Count: 44 1 - Error code: F157 There is also another error log record (see below): 2 - Device, Test: test_components/libstorage.so ID 2 - Description: An unexpected exception occurred while performing an operation. Exception message: CISS_StatusHandler::evaluate: commandStatus = 4 (INVALID); hexdump of CISS_ErrorInfo: 00000000: __ __ 04 __ 20 __ __ __ __ __ __ __ __ __ __ __ .... ... ........ 00000010: __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ ........ ........ 00000020: __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ ........ ........ Device: Hard Drive 2, Storage Controller in Slot 0 Property name: Bad Target Count 2 - Recommended Repair: Reboot or restart Insight Diagnostics. Retry the test. If the problem persists, upgrade to the latest version of Insight Diagnostics. 2 - Failed Count: 48 2 - Error Code: F62 Note that rebooting didn't help and I was running the latest diagnostic software version. Anyone has a clue? Is this a real disk issue? BTW, the controller is Smart Array E200i Thanks in advance

  Read the article

• knife on Windows inconsistently reads ~\.ssh\knife.rb on Management Workstation

  - by gWaldo

  I am implementing a new instance of (Open-source v10.12) Chef in an existing environment. Currently the environment is mostly Windows, but more Linux is being introduced. I have used Chef in a previous gig, however that was a *nix-only environment. Because this is a primarily-Windows environment, my main workstation is Windows 7 (x64), and I use Powershell as my main terminal. I created a ~\.chef directory, populated with a knife.rb and my client.pem file. When I run knife client list from ~, I get the expected results. I keep my work in Dropbox just in case my laptop should fail or be stolen. When I run knife client list from the repo directory (C:\Users\waldo\Dropbox_company\projects\chef`), I get ERROR: Your private key could not be loaded from C:/home/waldo/.chef/waldog.pem Check your configuration file and ensure that your private key is readable (Note that the path is incorrect) This is the progression as I walk up the tree towards my ~ running knife client list: C:\Users\waldo\Dropbox\_company\projects\ => Above error C:\Users\waldo\Dropbox\_company\ => Above error C:\Users\waldo\Dropbox\ => It works! (Expected results) C:\Users\waldo\ => Expected results C:\Users\waldo\Documents\ => Expected Results C:\Users\waldo\Documents\GitHub => Expected Results C:\Users\waldo\Documents\GitHub\aProject\ => Expected Results What. The. Eff! Now, I know that I can add -c path\to\knife.rb, but that's a HUGE PITA. Question is: Why is knife inconsistently reading my ~\.chef\knife.rb, and how can I get around that without incurring carpal tunnel?

  Read the article

• Unable to PPTP through NAT on Cisco 881

  - by MasterRoot24

  I'm trying to connect to a PPTP server which is sat behind a Cisco 881 NAT router. The server is running Ubuntu Server 12.04 and is running Poptop pptpd as the PPTP daemon listening for connections. As discussed in my other question, I'm trying to setup a Cisco 881 router to replace my old Linksys WAG320N. This same server and WAN connection worked fine with the WAG320N with no special configuration, other than allowing 1723 in through the firewall. On the Cisco 881, I'm using the newer ip nat enable or NAT NVI to setup static routes in through the firewall for the services running behind the router. My reason being that I can't run another copy of my live DNS domains internally with local IP addresses in. For the purposes of this question, though, I have rebuilt the router with ip nat inside/outside style NAT'ing, but this issue is still apparent. HTTP/SMTP/IMAP etc. all work ok from both the WAN and LAN interfaces of the router. I'm only having issues with SIP (see other question) and PPTP. My issue is that the GRE doesn't appear to be passing through NAT correctly and one end of the connection is not receiving GRE traffic when it should be, so the server hangs up the connection. Here's an example of /var/log/syslog with debug enabled in /etc/pptpd.conf: Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: MGR: Launching /usr/sbin/pptpctrl to handle client Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: local address = 192.168.1.50 Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: remote address = 192.168.1.51 Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: pppd options file = /etc/ppp/pptpd-options Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Client 82.132.248.216 control connection started Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Received PPTP Control Message (type: 1) Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Made a START CTRL CONN RPLY packet Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: I wrote 156 bytes to the client. Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Sent packet to client Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Received PPTP Control Message (type: 7) Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Set parameters to 100000000 maxbps, 64 window size Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Made a OUT CALL RPLY packet Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Starting call (launching pppd, opening GRE) Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: pty_fd = 6 Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: tty_fd = 7 Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: I wrote 32 bytes to the client. Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Sent packet to client Dec 11 21:06:30 <HOSTNAME> pptpd[22627]: CTRL (PPPD Launcher): program binary = /usr/sbin/pppd Dec 11 21:06:30 <HOSTNAME> pptpd[22627]: CTRL (PPPD Launcher): local address = 192.168.1.50 Dec 11 21:06:30 <HOSTNAME> pptpd[22627]: CTRL (PPPD Launcher): remote address = 192.168.1.51 Dec 11 21:06:30 <HOSTNAME> pppd[22627]: Plugin /usr/lib/pptpd/pptpd-logwtmp.so loaded. Dec 11 21:06:30 <HOSTNAME> pppd[22627]: pppd 2.4.5 started by root, uid 0 Dec 11 21:06:30 <HOSTNAME> pppd[22627]: Using interface ppp0 Dec 11 21:06:30 <HOSTNAME> pppd[22627]: Connect: ppp0 <--> /dev/pts/3 Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: GRE: Bad checksum from pppd. Dec 11 21:06:31 <HOSTNAME> pptpd[22626]: CTRL: Received PPTP Control Message (type: 15) Dec 11 21:06:31 <HOSTNAME> pptpd[22626]: CTRL: Got a SET LINK INFO packet with standard ACCMs Dec 11 21:07:00 <HOSTNAME> pppd[22627]: LCP: timeout sending Config-Requests Dec 11 21:07:00 <HOSTNAME> pppd[22627]: Connection terminated. Dec 11 21:07:00 <HOSTNAME> avahi-daemon[1042]: Withdrawing workstation service for ppp0. Dec 11 21:07:00 <HOSTNAME> pppd[22627]: Modem hangup Dec 11 21:07:00 <HOSTNAME> pppd[22627]: Exit. Dec 11 21:07:00 <HOSTNAME> pptpd[22626]: GRE: read(fd=6,buffer=6075a0,len=8196) from PTY failed: status = -1 error = Input/output error, usually caused by unexpected termination of pppd, check option syntax and pppd logs Dec 11 21:07:00 <HOSTNAME> pptpd[22626]: CTRL: PTY read or GRE write failed (pty,gre)=(6,7) Dec 11 21:07:00 <HOSTNAME> pptpd[22626]: CTRL: Reaping child PPP[22627] Dec 11 21:07:00 <HOSTNAME> pptpd[22626]: CTRL: Client 82.132.248.216 control connection finished Dec 11 21:07:00 <HOSTNAME> pptpd[22626]: CTRL: Exiting now Dec 11 21:07:00 <HOSTNAME> pptpd[5803]: MGR: Reaped child 22626 As far as Cisco are concerned, all I need is ip nat source static tcp <SERVER LAN IP> 1723 interface FastEthernet4 1723 but of course this doesn't seem to the be helping the GRE traffic through as it should. Trying the connection to the LAN IP of the server from the same LAN as the server (behind the router), the PPTP connection works fine, so I'm confident that the server's config is ok. Furthermore, all I needed on my WAG320N was to open 1723 in the firewall. Here's my current router config: ! ! Last configuration change at 20:20:15 UTC Tue Dec 11 2012 by xxx version 15.2 no service pad service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname xxx ! boot-start-marker boot-end-marker ! ! enable secret 4 xxxx ! aaa new-model ! ! aaa authentication login local_auth local ! ! ! ! ! aaa session-id common ! memory-size iomem 10 ! crypto pki trustpoint TP-self-signed-xxx enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-xxx revocation-check none rsakeypair TP-self-signed-xxx ! ! crypto pki certificate chain TP-self-signed-xxx certificate self-signed 01 xxx quit ip gratuitous-arps ip auth-proxy max-login-attempts 5 ip admission max-login-attempts 5 ! ! ! ! ! ip domain list dmz.xxx.local ip domain list xxx.local ip domain name dmz.xxx.local ip name-server 192.168.1.x ip cef login block-for 3 attempts 3 within 3 no ipv6 cef ! ! multilink bundle-name authenticated license udi pid CISCO881-SEC-K9 sn xxx ! ! username admin privilege 15 secret 4 xxx username joe secret 4 xxx ! ! ! ! ! ip ssh time-out 60 ! ! ! ! ! ! ! ! ! interface FastEthernet0 no ip address ! interface FastEthernet1 no ip address ! interface FastEthernet2 no ip address ! interface FastEthernet3 switchport access vlan 2 no ip address ! interface FastEthernet4 ip address dhcp ip nat enable duplex auto speed auto ! interface Vlan1 ip address 192.168.1.x 255.255.255.0 no ip redirects no ip unreachables no ip proxy-arp ip nat enable ! interface Vlan2 ip address 192.168.0.x 255.255.255.0 ! ip forward-protocol nd ip http server ip http access-class 1 ip http authentication local ip http secure-server ! ! ip nat source list 1 interface FastEthernet4 overload ip nat source list 2 interface FastEthernet4 overload ip nat source static tcp 192.168.1.x 1723 interface FastEthernet4 1723 ! ! access-list 1 permit 192.168.0.0 0.0.0.255 access-list 2 permit 192.168.1.0 0.0.0.255 ! ! ! ! control-plane ! ! banner motd Authorized Access only ! line con 0 exec-timeout 15 0 login authentication local_auth line aux 0 exec-timeout 15 0 login authentication local_auth line vty 0 4 access-class 2 in login authentication local_auth length 0 transport input all ! ! end UPDATE 16/12/2012: The only progress that I have been able to make on this issue is that I'm confident that the issue is caused by the GRE tunnels (which are required for the PPTP connection to complete) are being blocked. When attempting a connection, I can see in show ip nat nvi translations that both a TCP translation on 1723 is setup and also a GRE translation is setup also. I appear to be able to see GRE related packets on the LAN that the server is on, so I am lead to believe that the server is sending(?) GRE packets, however running Wireshark on a client PC when attempting a connection shows absolutely no GRE packets. Whilst there are no configuration directives in my config posted above (that I can pin point) which would specifically block them, it would appear that the GRE packets are not being allowed in/out of the router's firewall, even though a NAT translation entry is setup to the server's LAN address. Would anyone be able to provide me with some help to ensure that GRE packets are not blocked by the router's firewall, so that this can be ruled out as a possible issue please?

  Read the article

• ADFS Relying Party

  - by user49607

  I'm trying to set up an Active Directory Federation Service Relying Party and I get the following error. I've tried modifying the page to allow <pages validateRequest="false"> to web.config and it doesn't make a difference. Can someone help me out? Server Error in '/test' Application. A potentially dangerous Request.Form value was detected from the client (wresult="<t:RequestSecurityTo..."). Description: Request Validation has detected a potentially dangerous client input value, and processing of the request has been aborted. This value may indicate an attempt to compromise the security of your application, such as a cross-site scripting attack. To allow pages to override application request validation settings, set the requestValidationMode attribute in the httpRuntime configuration section to requestValidationMode="2.0". Example: <httpRuntime requestValidationMode="2.0" />. After setting this value, you can then disable request validation by setting validateRequest="false" in the Page directive or in the <pages> configuration section. However, it is strongly recommended that your application explicitly check all inputs in this case. For more information, see http://go.microsoft.com/fwlink/?LinkId=153133. Exception Details: System.Web.HttpRequestValidationException: A potentially dangerous Request.Form value was detected from the client (wresult="<t:RequestSecurityTo..."). Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [HttpRequestValidationException (0x80004005): A potentially dangerous Request.Form value was detected from the client (wresult="<t:RequestSecurityTo...").] System.Web.HttpRequest.ValidateString(String value, String collectionKey, RequestValidationSource requestCollection) +11309476 System.Web.HttpRequest.ValidateNameValueCollection(NameValueCollection nvc, RequestValidationSource requestCollection) +82 System.Web.HttpRequest.get_Form() +186 Microsoft.IdentityModel.Web.WSFederationAuthenticationModule.IsSignInResponse(HttpRequest request) +26 Microsoft.IdentityModel.Web.WSFederationAuthenticationModule.CanReadSignInResponse(HttpRequest request, Boolean onPage) +145 Microsoft.IdentityModel.Web.WSFederationAuthenticationModule.OnAuthenticateRequest(Object sender, EventArgs args) +108 System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +80 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +266 `

  Read the article

• No video signal at boot with custom built computer

  - by Bart Pelle

  After booting my custom built computer, neither the VGA nor the HDMI methods from the video card seem to emit any signal to the display. I have tested both a regular VGA screen and a modern HDMI screen. Both did not receive signal. Below are the specifications from my computer build: Intel Core i5 3350P ASRock B75 Pro 3-M Seagate Barracuda 7200.14 ST1000 DM003 1000GB Corsair Vengeance LP CML 8GX 3M2 A1600 CGB Blue (2 cards) Cooler Master B Series B600 Club 3D Radeon HD7870 XT Jokercard Samsung SH-224 BB Black Sharkoon T28 Case The motherboard does not emit any beeps on startup. The CD tray opens properly and all fans spin. All cables are properly connected. All components are new and no damage was found on any of the components. The fans on the GPU spin aswell. The VGA test we did was by using the onboard graphics from the Intel i5, but this gave no result. The HDMI test was from the GPU which did not emit any signal either. We have not been able to test out the DVI, could this be important to test, even though all the other methods did not work? Thank you for your time and hopefully reply.

  Read the article

• Isolate clients on same subnet?

  - by stefan.at.wpf

  Given n (e.g. 200) clients in a /24 subnet and the following network structure: client 1 \ . \ . switch -- firewall . / client n / (in words: all clients connected to one switch and the switch connected to the firewall) Now by default, e.g. client 1 and client n can communicate directly using the switch, without any packets ever arriving the firewall. Therefore none of those packets could be filtered. However I would like to filter the packets between the clients, therefore I want to disallow any direct communication between the clients. I know this is possible using vlans, but then - according to my understanding - I would have to put all clients in their own network. However I don't even have that much IP addresses: I have about 200 clients, only a /24 subnet and all clients shall have public ip addresses, therefore I can't just create a private network for each of them (well, maybe using some NAT, but I'd like to avoid that). So, is there any way to tell the switch: Forward all packets to the firewall, don't allow direct communication between clients? Thanks for any hint!

  Read the article

• Exchange 2013 attachments too big?

  - by KPS

  I am having the toughest time sending large attachments, everywhere I have checked my file size limit for send/receive is 100mb but yet users are unable to receive files even at the size of 14mb. I'm using a spam filter (Appriver) and have worked with there support for a very long time, we see the following errors in logs 13:32:40.260 4 SMTP-000036([myserverIP]) rsp: 354 Start mail input; end with <CRLF>.<CRLF> 13:33:41.038 3 SMTP-000033([myserverIP]) write failed. Error Code=connection reset by peer 13:33:41.038 3 SMTP-000033([myserverIP]) [659500] failed to send. Error Code=connection reset by peer 13:33:41.038 4 SMTP([myserverIP]) [659500] batch reenqueued into tail Windows firewall is disabled on the exchange server, all other emails that are of smaller value come through just fine. Here is a print out of size limits: ConnectorType ConnectorName MaxReceiveMessageSize MaxSendMessageSize ------------- ------------- --------------------- ------------------ Send InternetSendConnector - 35 MB (36,700,160 bytes) Send Appriver-Smarthost - 35 MB (36,700,160 bytes) Receive Default EXCHSRVR 100 MB (104,857,600 bytes) - Receive Client Proxy EXCHSRVR 100 MB (104,857,600 bytes) - Receive Default Frontend EXCHSRVR 100 MB (104,857,600 bytes) - Receive Outbound Proxy Frontend EXCHSRVR 100 MB (104,857,600 bytes) - Receive Client Frontend EXCHSRVR 100 MB (104,857,600 bytes) - Receive ExchangeRelay 100 MB (104,857,600 bytes) - TransportConfig - 100 MB (104,857,600 bytes) 10 MB (10,485,760 bytes) ADSiteLink DEFAULTIPSITELINK Unlimited Unlimited There is a no anti-virus on the server either that could be interfering, I am out of ideas at this point :( EDIT 1 After running BPA, it gives and error: Exchange Organization: Check whether the incoming message(CN=MyDomain,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=WG,DC=local) size isn't set The maximum incoming message size isn't set in organization 'CN=MyDomain,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=WG,DC=local'. This can cause reliability problems. Here are the sizes as of now: [PS] C:\Temp>Get-TransportConfig | ft MaxSendSize, MaxReceiveSize MaxSendSize MaxReceiveSize ----------- -------------- Unlimited Unlimited [PS] C:\Temp>Get-ReceiveConnector | ft name, MaxMessageSize Name MaxMessageSize ---- -------------- Default EXCHSRVR 100 MB (104,857,600 bytes) Client Proxy EXCHSRVR 100 MB (104,857,600 bytes) Default Frontend EXCHSRVR 100 MB (104,857,600 bytes) Outbound Proxy Frontend EXCHSRVR 100 MB (104,857,600 bytes) Client Frontend EXCHSRVR 100 MB (104,857,600 bytes) ExchangeRelay 100 MB (104,857,600 bytes) Again, smaller emails come through just fine. Seems like there is a 10mb receive limit somewhere that I cannot find.

  Read the article

• How to determine the Kerberos realm from an LDAP directory?

  - by tstm

  I have two Kerberos realms I can authenticate against. One of them I can control, and the other one is external from my point of view. I also have an internal user database in LDAP. Let's say the realms are INTERNAL.COM and EXTERNAL.COM. In ldap I have user entries like this: 1054 uid=testuser,ou=People,dc=tml,dc=hut,dc=fi shadowFlag: 0 shadowMin: -1 loginShell: /bin/bash shadowInactive: -1 displayName: User Test objectClass: top objectClass: account objectClass: posixAccount objectClass: shadowAccount objectClass: person objectClass: organizationalPerson objectClass: inetOrgPerson uidNumber: 1059 shadowWarning: 14 uid: testuser shadowMax: 99999 gidNumber: 1024 gecos: User Test sn: Test homeDirectory: /home/testuser mail: [email protected] givenName: User shadowLastChange: 15504 shadowExpire: 15522 cn: User.Test userPassword: {SASL}[email protected] What I would like to do, somehow, is to specify per-user basis to which authentication server / realm the user is authenticated against. Configuring kerberos to handle multiple realms is easy. But how to I configure other instances, like PAM, to handle the fact that some users are from INTERNAL.COM and some from EXTERNAL.COM? There needs to be an LDAP lookup of some kind where the realm and the authentication name is fetched from, and then the actual authentication itself. Is there a standardized way to add this information to LDAP, or look it up? Are there some other workarounds for a multi-realm user base? I might be ok with a single realm solution, too, as long as I can specify the user name - realm -combination for the user separately.

  Read the article

• esxi 5 monitoring

  - by user134880

  I'm new to esxi/vmware world. Have few question about monitoring esxi host. Now I'm using trial versian esxi 5.1 I can see performance charts in vShpere client. Cool. But I want to export this raw data (raw - I mean cvs,txt or some format which I can parse later) to other server to be able to parse this data later and create custom charts. (please do not advise to try vCenter, I need custom charts etc.) I could run esxtop in batch mode and use this data... But... How does vShpere client performance charts work? Where client takes data for charts? So if I will use esxtop batch mode it will add extra load to server. Is it possible to use same source as vSphere client use for charts? There is /var/lib/vmware/hostd/stats/hostAgentStats-20.stats file. Its looks like it is binary format. As I understood it is exactly data which I need?!?! Any ideas how to parse it? Thanks! PS: maybe some one know where to find, if there is one, info about processes running on esxi host?

  Read the article

• Cannot write samba shares

  - by Batsu

  Running samba 3.5 on Red Hat Enterprise 6.1 I'm having issues sharing two folders. Here is the output of testparm: [global] workgroup = DOMAINNAME server string = Samba Server Version %v interfaces = lo, eth1 bind interfaces only = Yes map to guest = Bad User log file = /var/log/samba/log.%m max log size = 50 idmap uid = 16777216-33554431 idmap gid = 16777216-33554431 hosts allow = 10.50.183.48, 10.50.184.41, 10.50.184.199, 10.50.183.160, 127.0.0.1 hosts deny = 0.0.0.0/0 cups options = raw [test] comment = test folder path = /usr/local/samba valid users = claudio write list = claudio force user = claudio read only = No create mask = 0775 directory mask = 0775 [test2] comment = another test path = /home/claudio/tst valid users = claudio write list = claudio force user = claudio read only = No create mask = 0775 From the Windows XP machine I'm connecting from I'm able to read test but not write, while for test2 I can't even access the folder (though I can see it listed). ls -l /usr/local ... drwxrwxrwx. 2 claudio claudio 4096 Dec 3 10:39 samba ... ls -l /user/local/samba total 32 -rwxrwxrwx. 1 claudio claudio 9 Nov 29 16:26 asd.txt -rwxrwxrwx. 1 claudio claudio 728 Dec 3 10:16 out.txt ... ls -l /home/claudio/ ... drwxrwxr-x. 2 claudio claudio 4096 Dec 3 09:57 tst ... ls -l /home/claudio/tst total 4 -rw-rw-r--. 1 claudio claudio 4 Dec 3 09:57 asd.txt Any suggestion?

  Read the article

• How to configure CISCO switch 2960 for port-based address allocation on a single port only?

  - by Jack

  CISCO 2960 allows you to configure so-called Port-Based address allocation. It makes the switch to associate IP address it is giving out via DHCP with port-identifier, which is random, switch created identifier. In practice it means that any machine connected to such configured port will always get the same IP address, regardless of what that machine's MAC address is. I want to have that feature configured on --some ports-- only. But no matter what commands I try it seems that this can only be done for all ports, all for none. Even though CISCO manual seems to indicate there's both global and per-port command to enable that. Here are relevant commands from CISCO manual: configure terminal ip dhcp use subscriber-id client-id (this configures the DHCP server to globally use the subscriber ID as the client ID on all incoming DHCP messages) interface FastEthernet0/1 ip dhcp server use subscriber-id client-id (Optional: Configures the DHCP server to use the subscriber ID as the client ID on all incoming DHCP messages on the interface) but it appears if I configure only per-interface than there's no effect at all, if I configure globally and per interface - CISCo behaves as if all ports were configured to use that feature. Any ideas?

  Read the article

• How to get Synergy working on Ubuntu 11.10 and Windows 7?

  - by Linda

  I'm using Ubuntu 11.10 32-bit and Windows 7 64-bit, however, Synergy only works when a window (application or folder) is open and touching the edge of the screen where the mouse should "jump". In other words, if a window is open and maximized, Synergy works normally. Without any windows, the mouse does not jump to the other screen. My steps: (Ubuntu) apt-get install -y quicksynergy (Windows) Install Synergy (I've tried both 1.3.8 and 1.4.8 and both 32 and 64-bit) On Ubuntu 11.10 32-bit (Synergy Server config): ~/.quicksynergy/synergy.conf section: screens myubuntu: mywin7: end section: links myubuntu: right = mywin7 mywin7: left = myubuntu end On Ubuntu 11.10 32-bit: $ /usr/bin/synergys -f --config .quicksynergy/synergy.conf ... 2012-04-25T14:04:12 NOTE: client "mywin7" has connected /build/buildd/synergy-1.3.6/lib/server/CServer.cpp,287 (output hangs here) On Windows 7 64-bit: Synergy 1.3.8 Client on Microsoft Windows 7 x86 (WOW64) started client connecting to 'myubuntu': ###.###.###.###:24800 connected to server (output hangs here) At this point, things should work, but my mouse still can't change screens unless a window is maximized on my Ubuntu machine. Everything is running on port 24800. No firewall on Ubuntu. Firewall port 24800 open on Windows 7. This was previously working on Ubuntu 10.10 and Windows 7 (so only Ubuntu has been upgraded). I'm open to using either 32 or 64-bit on either server or client side, but I just want to get it working on Ubuntu 11.10 and Windows 7! I'm also using Ubuntu Classic (no effects), and not Unity.

  Read the article

• Home-made HTTP proxy server [closed]

  - by Martin Dimitrov

  I wanted to help a friend who has some restrictions at work to visit certain sites. Locally, on a Windows 7 machine, I run Apache server and decided to make it a proxy just for the IP of my friend. So I added the following to the configuration file: ProxyRequests On ProxyVia On <Proxy *> Order deny,allow Deny from all Allow from <his.ip> </Proxy> It worked fine. But shortly the proxy started to receive many requests of the form: 66.249.66.242 - - [22/Sep/2012:11:01:12 +0300] "GET /search?hl=en&lr=lang_en&as_qdr=all&ie=UTF-8&q=related:www.aarp.org/aarp-foundation/+allinurl:+foundation&tbo=1&sa=X&ei=BSy2T9L_L8PitQapwtHtBw&ved=0COQBEB8wPw HTTP/1.1" 403 208 66.249.71.36 - - [22/Sep/2012:11:01:49 +0300] "GET /search?hl=en&lr=lang_en&as_qdr=all&ie=UTF-8&q=related:www.aarp.org/aarp-foundation/+allinurl:+foundation&tbo=1&sa=X&ei=BOCzT-_WK8_0sgbki5XCDA&ved=0COABEB8wPg HTTP/1.1" 403 208 These are Google IPs. The requests are every 30 seconds or so. My friend is not at work today. In apache_error.log I see: [Sat Sep 22 11:09:20 2012] [error] [client 66.249.66.242] client denied by server configuration: C:/wamp/www/aclk [Sat Sep 22 11:09:47 2012] [error] [client 66.249.71.36] client denied by server configuration: C:/wamp/www/search What the hell is going on? Please, help.

  Read the article

• Is there a screen sharing/remote desktop app for mac that lets you use a different host screen resolution?

  - by MarqueIV

  Ok, there are tons and tons of questions about remote desktop for mac and they're all being closed as duplicates. I however am specifically looking for one that will let me use a different resolution than the host, the way you can with Remote Desktop for Windows. For instance, when I connect to my 11" Macbook Air booted into Windows7 from my quad-screen desktop, also booted into Win7 using Microsoft's Remote Desktop Client, it blanks out the screen on the notebook, then virtualizes the video across all four of my desktop's monitors at their native resolutions (2560x1600, 2 x 1920x1200 and 1600x1200) and the notebook now acts as if it has four physical monitors connected to it. All of this from a notebook that only has a 1366 x 768 native resolution. Even when running OS X on the client running RDC, while it doesn't support multi-monitors like its Win counterpart, it still lets me run at the native resolution of the client screen of 2560x1600. Again, it just blanks out the host screen while doing so. However when using Mac's screen sharing, since that is just glorified VNC, it just mirrors what's already on the host's screen, meaning it will always be a single screen with the resolution of 1366x768. This of course makes sense since VNC is a mirroring solution, not a video-virtualizing one like RDC, but it means that on my quad-monitor setup, the remote window isn't even large enough to fill up a single monitor, let alone four (unless you have a client that can scale it up, but that's video scaling. It's still only 1366x768.) So what I'm looking for is if there is a solution on the Mac that lets me do the same thing as RDC in a Win environment. Don't care if I have to pay. I'd gladly pay several hundred dollars for this. I just need that specific feature. Note: People have suggested various VNC clients, but the VNC host still runs at 1366x768 so that will not work here. Ever. Also, people have suggested Synergy/Synergy+/Teleport and such which share the keyboard and mouse, not video. Completely different animal unrelated to what I'm looking for.

  Read the article

• linux command prompt ftp to ftp server running on windows

  - by Vass

  Hi, I am using on Windows Vista, Filezilla server. I have it set up to be accessed via outside IPs and when I use a client on the IP I have it connects normally using Filezilla client. On the same machine I have Ubuntu running in a virtual box and when using filezilla client in there it works fine. Now I want to try the command prompt. So I do the ftp xxx.xxx.xx.xx I enter the name and password and i get the ftp command prompt, but the commands are not working properly. when trying "ls" or "cd" these commands do not work. "cd" tells me that the current directory is "/" root, but this does not make sense in the windows operating system. Now the filezilla client is taking the user in the application window directly to the root folder of the permitted filespace granted to that user. How can the same be done from the command prompt, if there is a way? It is as if the command prompt takes me to the root which does not exist or even have correct permissions to move in. Is there any way to be taken to the correct directory directly, or move there especially when the slashes are the wrong way around etc? Best,

  Read the article

• Display maintenance site to requesters based on their IP address

  - by user64294

  Hi all. I would like to set a special configuration in our apache web server. I would like to display sites to the users according to their IP addresses. We plan to upgrade our web sites. During the upgrade we'll put a maintenance site: so all the users which will connect to our web sites will get this site. There are 200 websites affected by the upgrade, so I don't want to change apache settings for each one. In order to test the upgrade i need to set apache to let only my IP address to access to asked site. If my IP address is a.b.c.d and if i ask for test.com i want to see it. but all other users, having a different IP address, should get the maintenane site even if they look for test.com. Our webserver is hosted out of the office (ovh.com france). The testers are the developers at our office and me. We can take some sites and enable them for test in which we implement IP restrictions in each website: the idea is on these websites, if the visitor's IP address is different from our office IP address we redirect this visitor to our maintenance website else we display the website. Is there a way to do this? Thank you.

  Read the article

• ESXi 5 Guests will not boot

  - by Adrian

  I have a problem with Guests not booting under VMWare ESXi 5.0 on my IBM x3550M3 server. Note: Investigation eventually determined that problem was with the VMware client on a Lenovo Edge laptop, the only Windows box available in a Linux IT shop. vSphere Client v4 and v5 duplicated behavior on the Lenovo Edge. As indicated in the comment to the accepted answer, replacing the workstation with one using different video was the "fix" for this particular issue. The ESXi host boots just fine. The Client connects just fine. Guests can be configured but do not successfully boot. The initial guest memory consumption jumps up to 560MB and drops down to 40MB after a few seconds. Initial CPU usage is 1 full CPU (3000Ghz per the chart) and immediately drops downm to 29Mhz. Guests do not display any output in the Console tab but show a state of 'Powered On'. No errors in the Events tab. Switching Guest from BIOS to EFI makes no difference. VMs are listed as Version 7 and the behavior is duplicated across all availabled Guest OS flavors. Problem also duplicated when server is booted up in Legacy Only mode. Logs do not contain anything particularly suspicious. Edit: No firewalls, routers, or VLANs in between the client and server. Edit 2: We have tried to Boot Guest into BIOS screen at Next Boot checkbox in the Guest Setting. Was not successful. Edit 3: 500GB datastore with 1 40GB VM on it. Plenty of space. Edit 4: Guests copied from my old ESXi 4 server DO NOT boot on the ESXi 5 system. Initially it complains about too little Video RAM being configured for the default 2500x1600, but it still doesn't work properly even after I bump the Video RAM settings or switch it to Auto-Detect.

  Read the article

• How to send email from home ip when the email server isn't a designated outbound mail server allocated to BT Retail customers [on hold]

  - by Mr Shoubs

  (I am sys admin!) I can receive email, but when I try to send an email from my home office via our work email server I get the following reply: Your message did not reach some or all of the intended recipients. Subject: Test Sent: 19/08/2014 17:02 The following recipient(s) cannot be reached: 'Joe Blogs' on 19/08/2014 17:02 Server error: '554 5.7.1 Service unavailable; Client host [my-ip-here] blocked using zen.spamhaus.org; http://www.spamhaus.org/query/bl?ip=my-ip-here' I went to that URL and it says the following: Ref: PBL231588 81.152.0.0/13 is listed on the Policy Block List (PBL) Outbound Email Policy of BT Retail for this IP range: It is the policy of BT Retail that unauthenticated email sent from this IP address should be sent out only via the designated outbound mail server allocated to BT Retail customers. Please consult the following URL for details on how to configure your email client appropriately. http://btybb.custhelp.com/cgi-bin/btybb.cfg/php/enduser/cci/bty_adp.php?p_sid=fPnV4zhj&p_faqid=6876 Removal Procedure Removal of IP addresses within this range from the PBL is not allowed by the netblock owner's policy. Going to this URL just says: This site has been disabled for the time being. Does anyone know what I should do to allow me to send emails from my home ip - the site suggests I can configure my email client? (note that I have configured the client to use smtp authentication)

  Read the article

• Amazon EC2 Nat Instance - goes out but not back in

  - by nocode

  I've followed Amazon's steps and list what I've done. I've created 6 subnets (4 private SN1: 10.50.1.0/24, SN2: 10.50.2.0/24, SN3: 10.50.3.0/24, SN4: 10.50.4.0/24) and 2 public (SN5: 10.50.101.0/24 and SN6: 10.50.102.0/24) -I have a Bastion host and a NAT instance on SN5 and assigned EIP's to both. I created a test instance on SN1. edit: -NAT instance has source/destination check disabled -On the NAT instance, I had enabled the following commands to be bootstrapped: echo 1 > /proc/sys/net/ipv4/ip_forward iptables -t nat -A POSTROUTING -s 10.0.0.0/16 -j MASQUERADE -In my VPC, the private subnets have their own route table and configured 0.0.0.0/0 to the NAT instance with 4 subnets being associated with the route table. I have a second route table for my public subnets and 0.0.0.0/16 is pointed towards the IGW (with the other 2 subnets associated with it). -For Security Groups, I have the NAT instance accepting all traffic on each of the 4 subnets and all OUTBOUND traffic is allowed. For my test server, I have allowed all outbound access and have allowed all traffic from the public subnet of the NAT host. I can ping internally with no issues. On my test instance, if I try to ping google.com, DNS resolves however I don't get a reply back. On my NAT instance, I run a tcpdump and can see the request being requested to google.com but it's not sending the reply back. My NAT host can ping and receive a reply from google. From the test host, when I ping the NAT instance, the tcpdump shows a request and receive. Is there something I'm missing? EDIT: I've figured it out - I had to save the iptable config and restart the service.

  Read the article

• SVN, Samba and Symbolic Links. How to get them all to play together?

  - by Camsoft

  I've got a website project under version control that relies on files from an unversioned directory on the same server via Symbolic Links. I'm currently storing the symbolic links in the repository. The idea is that if someone checks out a working copy on to the same server they can edit and test the working copy of the project before committing it back to the repository. When they checkout their working copy it successfully sets up the symlinks so that the entire site works when testing. The users that work on the project are Windows users, so I've set a samba shares on the server and then mapped them to network drives in Windows. People can edit their working copies directly on the server via network shares and then test them in the web browser before committing their changes back to the repository via TortoiseSVN. The Problem The problem I have is that Samba resolves the symlinks as expected but when a user tries to commit their changes back to the repository, TortoiseSVN thinks the linked files are part of the project and tries to commit the target files to the repository and not the symlinks themselves. I tried turning off symlink support in samba which means that the linked files cannot be resolved as I don't really want people to have access to the linked files nor do I want to import the linked files in the repository. The problem with this is that I get Can't stat '\webserver\projects\working\project\symlinked_file.php'. Access is denied Apart from the symlink problem everything else works 100% perfectly. Users can either checkout website projects to their machine and work on them (but can't test) or checkout them out to their space on the dev web server and work on them and fully test. So I don't want to change the workflow process, I just need a solution to the symbolic link issue. Many thanks. Originally posted on StackOverflow: http://stackoverflow.com/questions/2400917/svn-samba-and-symbolic-links-how-to-get-them-all-to-play-together

  Read the article

• GlusterFS as elastic file storage?

  - by Christopher Vanderlinden

  Is there any way to run GlusterFS in a replicated mode, but with the ability to dynamically scale the volume up and down? Say you have 3 servers all running glusterd. your Gluster volume would have to be setup with replica 3 gluster volume create test-volume replica 3 192.168.0.150:/test-volume 192.168.0.151:/test-volume 192.168.0.152:/test-volume You would then mount it as say \mnt\gfs_test What happens when I want to add 2 more servers to the storage pool and then also use them in this volume? Is there any easy way to expand the volume AND increase that replica count to 5? My end goal is to run this on EC2 instances, say 3 Apache front ends, with the webroot setup on the gluster volume mount. My concern is that if I ever need to spin up a server, I would want the server to not only be an additional Apache front end, but also another server in the gluster file system, adding to fault tolerance as well as possibly giving a slight boost in read speed. Maybe there are better options that would fit the bill here? Thanks.

  Read the article

• Forcing users to change password on first login - Windows Server 2008 R2 Remote Desktop Services

  - by George Durzi

  I'm setting up a demo lab environment in which each demo lab user is assigned 4 accounts to use in the lab. Users access the lab via Remote Desktop to the "client" machine in the lab - exposed at demolab.mydomain.com. The Client machine is a Windows 2008 Server R2 Enterprise Edition server The Remote Desktop Services role is configured on this server Remote Connection settings are configured to allow users to connect with any version of the Remote Desktop Client All accounts are members of the local Administrators and Remote Desktop Users groups All accounts are configured to be forced to change the default password after first login The user is instructed to remote into the lab with an account designated as their main account, and establish 3 more remote desktop sessions within the lab using their 3 other assigned demo lab accounts. When establishing the initial remote desktop connection to the lab using their main account, the user sees the change password dialog as expected. However, after logging in and trying to establish remote desktop connections to the server with their three other accounts, they are prompted that they need to change the password after logging in but can't continue with the login process - they don't see the expected change password experience. After logging in with a primary accounts, it doesn't make a difference if I try establishing a Remote Desktop connection to the environment using the name of the server, e.g. Client, or demolab.mydomain.com. I experimented with changing the settings for Remote Connections to require NLA but that didn't make a different. Appreciate any tips. Thanks

  Read the article

• Remote connection to a Windows 2008 Server Web edition

  - by Lorenzo

  Hello I have just installed Windows 2008 web server to have a development/test site on my office. In the test network I only have 2 machines: Windows server 2008 Web Edition Vista x64 client machine with Visual Studio The client and the server are networked using a NETGEAR router. I have enabled Remote desktop on the server and when I try to connect to it within the Vista client I get the credential window as in the following screenshot. But even if I write the correct credentials I am not able to remote login on the server. Where am I doing wrong? Update 1 I have even tried to create a folder share on the server. But I am not able to access it for the same reason. User or password invalid it says. But this is impossible as I am logging in the server with the same credentials. Update 2 If I try to browse the network from the RDP client I receive a message saying that there are no server running Terminal Services in my network.... :O

  Read the article

• Linux Startup Script after Gnome Login

  - by Eric

  I have a Fedora server that I want to spawn an interactive python script after the user logs on. This script will ask the user for various types of information for configuring the system or it will search for the previous config file and show them the predefined information. Originally I was going to put this in rc.local or make it run with init.d but that messed up the boot due to how the script is spawned. So I would like this script to run as soon as the user logs in to Gnome. I've searched around quite a bit and found this answer which appears to be exactly what I want, but it isn't working the way I want it to. Below is my entry. [Desktop Entry] Name=MyScript GenericName=Script for initial configuration Comment=I really want this to work Exec=/usr/local/bin/myscript.sh Terminal=true Type=Application X-GNOME-Autostart-enabled=true Whenever I login, nothing happens. So I then did a test to modified "myscript.sh" to just echo some text to a file and it worked fine. So it appears the portion that isn't working is the script popping open a terminal and waiting for the users input. Are there any additional options I need to add to make this work? I can confirm when I run /usr/local/bin/myscript.sh from the CLI it works fine. I have also tried adding "StartupNotify=true" and still no luck. Edit @John - I tried moving my Exec= to /usr/local/bin/myscript-test and this is what myscript-test contains. #!/bin/bash xterm -e /usr/local/bin/myscript.sh Yet again, when I just run the myscript-test it works fine. However when I put that in my autostart, nothing happens. Edit 2 - I did a few more tests and it did start working but I had to remove Terminal=True before the xterm would pop. Thanks for your help.

  Read the article

< Previous Page | 442 443 444 445 446 447 448 449 450 451 452 453  | Next Page >