Search Results

Search found 21963 results on 879 pages for 'lance may'.

Page 449/879 | < Previous Page | 445 446 447 448 449 450 451 452 453 454 455 456  | Next Page >

• Just how slow should my VPN be?

  - by David Heggie

  I have a VPN setup between a remote office with 2 ADSL connections (8Mb downstream, 512Kb upstream) and a main office with a 10Mb EFM connection (10Mb both up and down). The VPN is an IPSec connection using a DrayTek 2930 router for the ADSL and a DrayTek 3200 router at the EFM end. However, I'm unable to get speeds over this connection (tested with iperf) of anything over 600Kb or so down from the main office (traffic will pretty much always be from the main office to the remote office) Whilst I realise that there is an overhead and I'm never going to get the "full" bandwidth available over this VPN, I'd like to think that there's something I should be looking at that may help improve it. I've tried using the DrayTek's built-in "VPN Trunking" features which are supposed to load-balance connections, but this doesn't seem to improve matters much. I guess my question is - is this the kind of performance I should expect from this kind of setup and I'll just have to live with it, or should I be able to squeeze something more out of it through some VPN magic?

  Read the article

• The Real Value Of Certification

  - by Brandye Barrington

  I read a quote recently by Rich Hein of CIO.com "Certifications are, like most things in life: The more you put into them, the more you will get out." This is what we tell candidates all the time. The real value in obtaining a certification is the time spent preparing for the exam. All the hours spent reading books, practicing in hands-on environments, asking questions and searching for answers is valuable. It's valuable preparation for the exam, but it's also valuable preparation for your future job role and for your career. If your goal is just to pass an exam, you've missed a very important part of the value of certification.We receive so many questions through different forms of social media on whether or not certification will help candidates get jobs or get better jobs. Surveys conducted by us and by independent entities all point to the job and salary benefits of certification. However, a key part of that equation is whether a candidate can actually perform successfully in a job role. If preparation time was used to practice and learn and master new skills rather than to memorize a brain dump, the candidate will probably perform successfully in their job role, and job opportunities and higher salary will likely follow. Candidates who do not show that initiative, will not likely reap the full benefits of certification.Keep this in mind as you approach your next certification exam. You are preparing for a career, not an exam. This may help you to be more appreciative of the long hours spent studying!

  Read the article

• How to invoke a command using specific proxy server?

  - by Xiè Jìléi

  Some applications support proxy (http proxy or socks proxy), and some are not. For browsers, I can specify proxy server in the preferences/options dialog, and other applications may be able to configure proxy servers in config files. For general purpose, can I invoke a command using a specific proxy? Like following: $ proxy-exec --type sock5 --server 1.2.3.4:8000 -- wget/ftp ... I'm using Ubuntu Maverick. P.S. In win32, it can be implemented by hijacking the socket dlls, maybe, I'm not familiar with Linux programming, but I guess it's possible in Linux. though.

  Read the article

• after changing file from unix to dos it is having empty lines..how to handle this

  - by user2814717

  After converting file using **unix2dos** command it is having some empty lines. Please help me. How to handle this? I tried to delete empty lines as follow, but couldn't work. $ sed '/^$/d' /tmp/data.txt Hey following examples also didn't work. Pl help This is source data before using unix2dos. ID NAME DATE 1 BALA 09/23/2013 2 KRISHH 09/24/2013 3 billy 09/24/2013 After using unix2dos it is coming as ID NAME DATE 1 BALA 09/23/2013 2 KRISHH 09/24/2013 3 billy 09/24/2013 first and second record there is an empty line coming up..may be in bewteen data also Thanks

  Read the article

• How to stay creative when going through tough emotional times (divorce, family death, etc)? [closed]

  - by gaearon

  Hi everyone. I believe this is not a duplicate of motivation question because I want to especially emphasize the emotional breakdown. You may conquer lack of motivation by working harder and getting through the dip, however this was not the case when I was separating with my girlfriend. I actually liked the project, it was (and it still is!) my first programming job at an amazing workplace and I wasn't being pressured in any way but I found myself absolutely unable to code, blankly staring at the screen, my thoughts disorganized, the feeling of emptiness all in my chest. I could perform some straightforward coding but anything that involves creative thinking, designing abstractions, solving new problems and, worst of all, fixing bugs in legacy code, completely wiped out my brain to the point I started avoiding work, which I never have done before. Coffee only used to make it worse. Eventually I got over that, and I remember the happy day I solved a problem elegantly and thought—hell, first time in a month! Thankfully the project wasn't top priority and I had the time to catch up. I wonder now, was there any other way to boost my productivity back then? I bet people would say I should've taken a break—and I think I really should have—but what if I needed the money? Didn't want to lose my job? Are there any ways to trick your brain into being creative despite emotional losses? From your experience, would it be worth talking to my boss, collegues?

  Read the article

• Looking for a Linux stream ripper that can be scheduled

  - by Anthony D

  I have an MP3 stream I want to schedule a recording of. I can do it using wget to a file, its just a straight mp3 stream. However I'd like to use a command line stream ripper that will do a better job. Any one know of one? Update 1 WGET is grabbing whatever part of the stream it comes in on. This may not really be the start of a frame in the MP3 file. Also, wget is not really schedule ready. I experimented with starting it with a cron job, then killing it later, this produced a file that didn't really start and stop where I wanted.

  Read the article

• Symfony sfControlPanel 500 error only when executing 'tasks'

  - by rrlange

  As a bit of background, I recently had to restore a Symfony site from backup. Ever since the 'successful' restore, I am running into an exception when trying to execute a(ny) task via the web-based sfControlPanel: Unable to find PHP executable stack trace * at sfToolkit::getPhpCli() in SF_ROOT_DIR/plugins/sfControlPanelPlugin/modules/sfControlPanel/actions/actions.class.php line 93 FYI: symfony version 1.0.6 PHP 5.2.6 (cli) (built: May 2 2008 16:06:40) Apache/2.2.3 CentOS 5.* Thank you very much for any and all suggestions as to what might be amiss. Addendum: I neglected to mention that I can the frontend app (and certain backend apps) perfectly fine via the web. I am also able to run common tasks via the command line (cc etc.).

  Read the article

• How do I remove the tool tips on the launch bar?

  - by Sephethus

  The title is the question. These tool tips stay until I try to click past them. They're annoying since they constantly pop up and block the view of what I'm trying to do. Unfortunately I need the launch bar because Ubuntu is running on VMware and the console does not allow me to use the keyboard for switching tasks (to my knowledge). How do I disable them? I'd post an image as an example, but this site will not let me. UPDATE: unity 5.16.0 UPDATE 2: I discovered that this may only be a problem with users who run Ubuntu on a full screen VMware console that is situated on the right monitor. When the mouse is moved to the left monitor the tooltips popup and remain until the mouse is clicked twice in the VMware console window to make it active. Unfortunately my problem is one involving a rare situation I think. However, I'd love to be able to disable these tool tips if possible. It would also be nice if new features were added that can allow further customization of the launch bar.

  Read the article

• Why are some web clients requesting a page named "cache"?

  - by Toto

  We see errors like this in the apache error log: [Thu May 17 14:32:35 2012] [error] [client 192.168.1.1] File does not exist: /home/www-data/mywebsite.com/r/cache, referer: http://www.mywebsite.com/r/1010 It is strange because: There is no reference in the code/url about a folder/file "cache". The folder/file "cache" does not exist The client is randomly trying to access a "cache" folder everywhere on the website. It is always trying to access the folder/file "cache" following this pattern: Pattern: /level1/.../levelwhatever/filename (referer) /level1/.../levelwhatever/cache We run a LAMP (Debian stable: PHP 5.3.3-7+squeeze9. We also use APC 3.1.3p1). We use Google Analytics and AdSense. We do not know how to reproduce the problem. Note: I replaced the user's IP in the code for privacy.

  Read the article

• decrypting a dvd and testing that it is decrypted and playing it locally with its menu?

  - by barlop

  I have a DVD , it may be decrypted. How do I get it to hard drive decrypt it and see if it is decrypted? I have got it to hard drive... I can get VOB files to play(does that mean it is not encrypted?) but I can't get it to play with the menu. I can get the DVD itself to play with a menu. I'd like to get the local copy to. Also, I can play the first VOB file in VLC and MPC but not in mplayer. But that's a secondary thing. I will use whatever player you suggest. I have tried VLC, and mplayer, and media player classic.

  Read the article

• Need advice concerning Feature Based Development when knowledge DB is involved

  - by voroninp

  We develop BackOffice application which is used to edit our knowledge DB. Now our main product's development team is shifting to the feature based development and we need to support several DB's with not identical data schemes. (DS changes slightly from DB to DB) The information from knowledge Db is extracted by the script and then is distributed to the clients. We also need to support merging these DB's. We now analyze pros and cons of different approaches. We discuss this one: One working DB (WDB) with one DB for each feature branch (FDB). The approved data is moved from WDB to FDB. So we need to support only one script for each branch. This script will extract data from corresponding FDB. Nevertheless we are to code the differences between FDBs and WDB manually. May be some automatic mapping tools exist? I also wish to know whether classic solutions to the alike problems already exist. Can anyone share the best practices for this case?

  Read the article

• Mobile development, recommended computer configuration?

  - by MikaelW

  Hi, For the last 4 weeks, I have been trying to get into mobile development. Done a couple of tutorials, read some books, developed a couple of dummy Android apps. The thing is my computer is a 5 years old laptop, it is slow and time has come to replace it and I’m looking at different offers online. Have you got any recommendations? Is there any must-have that should make my developer life easier in the future? Is there anything specific that may be useful at a more advanced stage of development that I just can’t think of right now on the hardware side? (I mean apart from good proc, lots of RAM, many USB ports...) One thing I can think of is to have three OS on the same workstation: Windows, Unix and MacOS (so far I focused on android/java/eclipse but am interested in Iphone/objC/xcode as well) but that’s more on the software side. Anyway, would be grateful for any recommendations. Thanks in advance! Mikael PS: I’m quite free on the budget side of things PPS: I'm aware it's not really a programming question but will still be of interest to some programmers here.

  Read the article

• Installing Visual Studio 2010 SP1 or Windows Phone tools in your VM (danger!)

  - by Jeff

  If you've read my blog for any amount of time, you probably know that I tend to develop stuff in a Parallels VM on a Mac. It's how I roll. I like VM's because I can trash them and do really stupid things with beta software. That said, there is a pain point that doesn't seem that well documented when it comes to installing stuff in this scenario.The WP7 tools, and SP1 for Visual Studio 2010 (perhaps only if you already have the WP7 tools installed, I'm not sure), do something strange on install. As if it weren't already a long and slow installation, for reasons I don't understand, the installer fires up an instance of Windows Phone Emulator. As you may already know, the emulator doesn't run in a VM, because it is itself a VM, apparently. What it will do is fire up your CPU, make your comprooder hot and make the fans blow harder.I found this out accidentally, as I started the (slow) phone tool installation once, and walked away. An hour and a half later, I came back to find it hadn't finished. But it was hot and the CPU was pegged, so I fired up the task manager to find XDE.exe, the phone emulator, cranking away. I had to kill it several times, and eventually the install finished. It fired up just once in the SP1 install, but it still had the same hanging effect.I can't for the life of me figure out why it does this. In a VM, I can connect the phone to it and use that, so I don't need the emulator. But this install, firing up the emulator, will make it choke until you kill the XDE.exe process. Watch out!

  Read the article

• Nginx Tornado Combination Causing 502 Bad Gateway Errors

  - by PlaidFan

  We are facing a problem with inconsistent 502 errors and tracking down the reasons has been a very frustrating exercise. We can reproduce the problem by sending several simultaneous requests quickly. The problem is that several is only in the range of 10 to 20 within a 5 seconds (not a typo). So clearly this type of load should be handled easily. We really like the Nginx + Tornado approach but are considering going to a more traditional (e.g. threading) approach because this problem has been very difficult to solve. I was wondering if you a) know how to fix this issue and b) how we can tracked down the culprit(s). The log files simply identify there being a connection refused. We have the same problem as this post: How do I debug a HTTP 502 error? But there is no answer provided on how to solve the problem so I'm hoping you can help because this may be a common issue with this type of setup. Thanks in advance, Paul

  Read the article

• How do you make slides for programming talks?

  - by Yuvi Masory

  I've given a few talks recently and I have not found a good way to make slides. Here are a few desirable characteristics for programming slides: They're slides. A standard emacs buffer won't do it. They have syntax highlighting for code. They support basic formatting, like font size and color and bullets. No fancy animations needed. The only animation I desire is one-by-one appearance of bullets. So far I have considered: Microsoft Office - out of the question for Linux users. OpenOffice.org - too much for my needs, code formatting/highlighting needs to be done externally and pasted in. On the plus side supports bullets, bullet-by-bullet animation, and font formatting. Emacs - Supports all the code formatting but I haven't found a slides mode that lets me transition from one chunk to another. HTML5 - I once made slides using html5rocks as a template. It supports everything, but is too hard and time-consuming the "throw together" a few slides before a minor talk. Also the html5-only features may not work on the podium computer's installed browser. Any suggestions for programs/techniques for making code-centric presentations?

  Read the article

• Working with Git on multiple machines

  - by Tesserex

  This may sound a bit strange, but I'm wondering about a good way to work in Git from multiple machines networked together in some way. It looks to me like I have two options, and I can see benefits on both sides: Use git itself for sharing, each machine has its own repo and you have to fetch between them. You can work on either machine even if the other is offline. This by itself is pretty big I think. Use one repo that is shared over the network between machines. No need to do git pulls every time you switch machines, since your code is always up to date. Never worry that you forgot to push code from your other non-hosting machine, which is now out of reach, since you were working off a fileshare on this machine. My intuition says that everyone generally goes with the first option. But the downside I see is that you might not always be able to access code from your other machines, and I certainly don't want to push all my WIP branches to github at the end of every day. I also don't want to have to leave my computers on all the time so I can fetch from them directly. Lastly a minor point is that all the git commands to keep multiple branches up to date can get tedious. Is there a third handle on this situation? Maybe some third party tools are available that help make this process easier? If you deal with this situation regularly, what do you suggest?

  Read the article

• How to correctly handle redirect after site facelift

  - by Stefan

  I recently updated our site taking it from a multi-page site to a single page site. The problem now is that when the site is searched in say Google, it displays the site as well as the indexed pages. So if a user clicks say our "About" page, it takes them to our now outdated material. I am hoping to get some guidance on how to properly handle this. I figure the first step is to now setup a robots.txt on our new index page to tell the engines not to crawl beyond index.php. But in the meantime, how do I handle the fact that when searching our site on Google we may still have users who try to click on sub-page links? Should I simply setup redirects while waiting for the engines to update? And if so, do I need to setup redirects on each page using PHP or is this something I would take care of on our sites control panel? I am not very familiar with redirects... Any help is appreciated!

  Read the article

• Is it worth replacing mouse by standalone trackpad for heavy code-editing? [on hold]

  - by heltonbiker

  I recently got more interested in improving my tools, workspace and worflow. The first sting came with a sore finger due to a crappy keyboard, and then after some research I fell in love with the "mechanical keyboard is what you need" doctrine, bought one (cherry MX Brown if you're curious), and am very happy with the results. Currently I am replacing my previous text editor (Geany) with Sublime Text 3, and am also very happy and feeling much more powerful and professional :) Well, but while I re-read all the ancient debates about VIM vs whatever-else, the following excerpt from a blog post got me thinking again about the mouse vs keyboard, and the "moving around from the very home row" (in VIM) versus gesturing away with the tiny and unstable mouse cursor: Reaching for a mouse may indeed slow you down, but developers are commonly on machines where the trackpad is a micro-hand movement away. Most novice programmers can click on a character on screen faster than an expert Vimmer can type 20jFp; or LkEEE or /word or any other nasty way Vimmers have to use. The point of a mouse is to make arbitrary on screen jumps efficient, and it’s very good at doing that. Don’t you ever think you can beat a mouse. Well, although there is some bitterness in this statement, it makes a lot of sense, and EVEN MORE if you consider your direct input to be a TRACKPAD conveniently placed in front of your spacebar (which oddly is where I like to put my mouse, rotated 90° ccw, due to a serious tendonitis in my right shoulder, already healed, but you knod...). So, the question is: Has anyone replaced mouse by a standalone trackpad, to work in code editing in a desktop machine (that is, with a sandalone keyboard)? Was it worth the change?

  Read the article

• Own website fails to load first time

  - by AmazingDreams

  I have a website running on a VPS, every time I first try to load the website the connection times out. If I press try again, it loads directly. I'm not sure whether this is a DNS issue or a server issue. As far as I know everything is set up correctly. Also, it has been doing this from the moment I got this server and set up my domain name. And that's about two to three months ago. You may take a look here: http://www.wegotcha.nl/ As you can see at this moment it's just an image, there are no scripts running in the background or anything. The only error Apache gives me is that favicon.ico cannot be found. It's an Apache webserver running on Ubuntu 12.04.1 (newest version) I update all packages almost every day (apt-get update && apt-get upgrade). I am merely an amateur on the area of webservers so any help will be appreciated. :)

  Read the article

• How can I see the metadata of an ISO file?

  - by netvope

  I have been searching for the list of metadata field of an ISO file on Google but couldn't find anything. That made me think that there isn't any metadata in an ISO file, just the files content and their properties. However, today I find in ImgBurn that there is a field called Imp ID, which typically contains the software used to create the ISO file. I'm not sure if it is specific to the UDF and/or CDFS filesystem. What are the other possible metadata fields in an ISO file? What software may I use to see them?

  Read the article

• Unable to connect to remote MS SQL Server 2008 Express SP3 instance by name

  - by Max

  I am trying to connect to a remote MS SQL Server 2008 SP3 x86 Instance using it's name. At the first glance all seems to work well (e.g. it is possible to connect to the server locally and succesfully telnet it's port remotely), but there is a thing I can't understand... This line should connect us to the default instance of remote SQL Server: osql -S ServerIP -d MyDatabase /U sa -P MyPassword and it does the trick, however the next one: osql -S ServerIP\MyInstance -d MyDatabase /U sa -P MyPassword ends up with the following error: [SQL Native Client]SQL Network Interfaces: Error Locating Server/Instance Specified [xFFFFFFFF]. [SQL Native Client]Login timeout expired [SQL Native Client]An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. The only instance running on the server is MyInstance, which is (I guess) the default one. Could you please put some time in explaining the issue.

  Read the article

• Override methods should call base method?

  - by Trevor Pilley

  I'm just running NDepend against some code that I have written and one of the warnings is Overrides of Method() should call base.Method(). The places this occurs are where I have a base class which has virtual properties and methods with default behaviour but which can be overridden by a class which inherits from the base class and doesn't call the overridden method. For example, in the base class I have a property defined like this: protected virtual char CloseQuote { get { return '"'; } } And then in an inheriting class which uses a different close quote: protected override char CloseQuote { get { return ']'; } } Not all classes which inherit from the base class use different quote characters hence my initial design. The alternatives I thought of were have get/set properties in the base class with the defaults set in the constructor: protected BaseClass() { this.CloseQuote = '"'; } protected char CloseQuote { get; set; } public InheritingClass() { this.CloseQuote = ']'; } Or make the base class require the values as constructor args: protected BaseClass(char closeQuote, ...) { this.CloseQuote = '"'; } protected char CloseQuote { get; private set; } public InheritingClass() base (closeQuote: ']', ...) { } Should I use virtual in a scenario where the base implementation may be replaced instead of extended or should I opt for one of the alternatives I thought of? If so, which would be preferable and why?

  Read the article

• merge two parts of pdf in one

  - by Yurij73

  I have two searchable pdf documents say even.pdf and odd.pdf which contains respectively even and odd pages of a book. I can decompile each pdf to separate files 001.pdf 002.pdf oo3.pdf ....The question is how to merge them? They are both even and odd sequences numbered 1,2,3. If it where other numbering on decompile stage with pdftk for even 1,3,5 and for odd 2,4,6 instead of existing order 1,2,3, 4.. i coulde simple merge them, but i ignore this method of numbering with pdftk. May be i need to do the task in other way?

  Read the article

• AuthInfoRequired cups overwrites

  - by mooscape

  My problem is basically identical to the following: http://bbs.archlinux.org/viewtopic.php?id=61826 Put simply, I have a machine in ubuntu trying to connect to another ubuntu machine via a network in order to use the printer attached. There is no problem printing until I restart the guest machine. Immediately it overwrites the printers.conf file (under /etc/cups/printers.conf). It always adds the same line: AuthInfoRequired username,password I stop cups and change it to *#*AuthInfoRequired username,password to comment out the command. Start cups. Works great 'til the next shutdown. Then it gets overwritten again. Googling indicates it may be GTK problem and not CUPS, but I have found no permanent solution to date. Any suggestions appreciated ....

  Read the article

• How does one go about fixing a pixelation issue?

  - by Tyler

  I've been having a lot of trouble with pixelation and also in-game display driver crashes. At first I thought the problem may have been my graphics card (Sapphire 5750) but I have RMA'd it three times and I'm still having trouble. So what I think it might be is my PSU, its 650Watt but its made by Azza so it was cheap and not made by a necessarily good company. Or maybe it could be the CPU (AMD Phenom Black Edition 3.4Ghz) It runs hot (60C) but it passes Everest's test. Someone told me it could be the memory (8GB DDR3) but I don't really see how RAM has anything to do with my problem. So what are some of you suggestions? Here is a video a made awhile ago of what is happening. http://www.metacafe.com/watch/4392213/ati_radeon_5750/ That was just a stress test most games tend to just freeze and crash or lock my system up.

  Read the article

< Previous Page | 445 446 447 448 449 450 451 452 453 454 455 456  | Next Page >