Search Results

Search found 20963 results on 839 pages for 'video game'.

Page 449/839 | < Previous Page | 445 446 447 448 449 450 451 452 453 454 455 456  | Next Page >

  • How to properly do weapon cool-down reload timer in multi-player laggy environment?

    - by John Murdoch
    I want to handle weapon cool-down timers in a fair and predictable way on both client on server. Situation: Multiple clients connected to server, which is doing hit detection / physics Clients have different latency for their connections to server ranging from 50ms to 500ms. They want to shoot weapons with fairly long reload/cool-down times (assume exactly 10 seconds) It is important that they get to shoot these weapons close to the cool-down time, as if some clients manage to shoot sooner than others (either because they are "early" or the others are "late") they gain a significant advantage. I need to show time remaining for reload on player's screen Clients can have clocks which are flat-out wrong (bad timezones, etc.) What I'm currently doing to deal with latency: Client collects server side state in a history, tagged with server timestamps Client assesses his time difference with server time: behindServerTimeNs = (behindServerTimeNs + (System.nanoTime() - receivedState.getServerTimeNs())) / 2 Client renders all state received from server 200 ms behind from his current time, adjusted by what he believes his time difference with server time is (whether due to wrong clocks, or lag). If he has server states on both sides of that calculated time, he (mostly LERP) interpolates between them, if not then he (LERP) extrapolates. No other client-side prediction of movement, e.g., to make his vehicle seem more responsive is done so far, but maybe will be added later So how do I properly add weapon reload timers? My first idea would be for the server to send each player the time when his reload will be done with each world state update, the client then adjusts it for the clock difference and thus can estimate when the reload will be finished in client-time (perhaps considering also for latency that the shoot message from client to server will take as well?), and if the user mashes the "shoot" button after (or perhaps even slightly before?) that time, send the shoot event. The server would get the shoot event and consider the time shot was made as the server time when it was received. It would then discard it if it is nowhere near reload time, execute it immediately if it is past reload time, and hold it for a few physics cycles until reload is done in case if it was received a bit early. It does all seem a bit convoluted, and I'm wondering whether it will work (e.g., whether it won't be the case that players with lower ping get better reload rates), and whether there are more elegant solutions to this problem.

    Read the article

  • vector rotations for branches of a 3d tree

    - by freefallr
    I'm attempting to create a 3d tree procedurally. I'm hoping that someone can check my vector rotation maths, as I'm a bit confused. I'm using an l-system (a recursive algorithm for generating branches). The trunk of the tree is the root node. It's orientation is aligned to the y axis. In the next iteration of the tree (e.g. the first branches), I might create a branch that is oriented say by +10 degrees in the X axis and a similar amount in the Z axis, relative to the trunk. I know that I should keep a rotation matrix at each branch, so that it can be applied to child branches, along with any modifications to the child branch. My questions then: for the trunk, the rotation matrix - is that just the identity matrix * initial orientation vector ? for the first branch (and subsequent branches) - I'll "inherit" the rotation matrix of the parent branch, and apply x and z rotations to that also. e.g. using glm::normalize; using glm::rotateX; using glm::vec4; using glm::mat4; using glm::rotate; vec4 vYAxis = vec4(0.0f, 1.0f, 0.0f, 0.0f); vec4 vInitial = normalize( rotateX( vYAxis, 10.0f ) ); mat4 mRotation = mat4(1.0); // trunk rotation matrix = identity * initial orientation vector mRotation *= vInitial; // first branch = parent rotation matrix * this branches rotations mRotation *= rotate( 10.0f, 1.0f, 0.0f, 0.0f ); // x rotation mRotation *= rotate( 10.0f, 0.0f, 0.0f, 1.0f ); // z rotation Are my maths and approach correct, or am I completely wrong? Finally, I'm using the glm library with OpenGL / C++ for this. Is the order of x rotation and z rotation important?

    Read the article

  • Linking one uniform variable to many shaders

    - by Winged
    Let's say, that I have 3 programs, and in each of those programs there is a view matrix uniform, which should be the same in all those programs. Right now, when my camera moves, I need to re-upload the modified matrix to every program separately. Is it possible to create some kind of global uniforms which are constant for all programs linked to it, so I could just upload the matrix once? I tried creating a globalUniforms object which looked kinda like this: var globalUniforms = { program: {}, // (...) vMatrixUniform: null, // (...) initialize: function() { vMatrixUniform = gl.getUniformLocation(this.program, 'uVMatrix'); } }; So I could just link it to proper programs like this: program.vMatrixUniform = globalUniforms.vMatrixUniform;, and then pass the matrix like this: if (camera.isDirty.viewMatrix !== false) { camera.isDirty.viewMatrix = false; gl.uniformMatrix4fv(globalUniforms.vMatrixUniform, false, camera.viewMatrix.element); } but unfortunately it throws an error: Uncaught exception: gl.INVALID_VALUE was caused by call to: getUniformLocation called from line 272, column 2 in () in mysite/js/mesh.js: vMatrixUniform = gl.getUniformLocation(this.program, 'uVMatrix'); Summing up: is there a more efficient way of managing shaders which follows my logic?

    Read the article

  • How can I achieve strong typing with a component messaging system?

    - by Vaughan Hilts
    I'm looking at implementing a messaging system in my entity component system. I've deduced that I can use an event / queue for passing messages, but right now, I just use a generic object and cast out the data I want. I also considered using a dictionary. I see a lot of information on this, but they all involve a lot of casting and guessing. Is there any way to do this elegantly and keep strong typing on my messages?

    Read the article

  • Increasing speed of circle over time as linear with Box2d

    - by Whispered
    Assume that there is a circle and it can be moved by using keyboard arrows.Is required that increasing speed over time like increasing car speed. For example; max speed is 25 and time to reach max speed shall be 5 sec. Over 5 sec the speed will reach to max speed. Does Box2d handle that situation?. I tried setting linear valocity but it seems to make the circle have constant speed instead of increased speed over time. Thank You! Note: I'm using Box2DWeb Javascript port of Box2D.

    Read the article

  • Issues glVertexAttribPointer last 2 parameters?

    - by NoobScratcher
    Introduction Hello I will start out by explaining my setup, showing samples as I go along explaining the situation. I'm using these tools: OpenGL 3.3 GLSL 330 C++ Problem The problem is when I render the wavefront obj 3d model it gives a very weird visual glitch the model was supposed to be a square but instead its a triangluated mess with parts of the vertexes pointing in a stretched direction in massive amounts towards the bottom left side of the frustum.... Explanation: I'm using std::vectors to store my wavefront .obj model data using sscanf to get the floating point values into the structure members x,y,z and store them into the Points structure variable p; int index = IndexAssigner(1, 1); ifstream file (list[index].c_str() ); points.push_back(Point()); Point p; int face[4]; while (!file.eof() ) { char modelbuffer[10000]; file.getline(modelbuffer, 10000); switch(modelbuffer[0]) { case 'v' : sscanf(modelbuffer, "v %f %f %f", &p.x, &p.y, &p.z); points.push_back(p); break; case 'f': sscanf(modelbuffer, "f %d %d %d %d", face, face+1, face+2, face+3 ); faces.push_back(face[0]); faces.push_back(face[1]); faces.push_back(face[2]); faces.push_back(face[3]); } //Turn on FileReader aka "RENDER CODE" FileReader = true; } then I render the Points vector using the .data() member of std::vectors to the frustum. Other declarations: int numfloats = 4; float* point=reinterpret_cast<float*>(&points[0]); int num_bytes=numfloats*sizeof(float); Vector declarations: struct Point {float x, y , z; }; std::vector<int>faces; std::vector<Point>points; Render code: glGenBuffers(1, &vertexbuffer); glGenTextures(1, &ModelTexture); glBindBuffer(GL_ARRAY_BUFFER, vertexbuffer); glBindTexture(GL_TEXTURE_3D, ModelTexture); glTexImage2D(GL_TEXTURE_2D, 0,GL_RGBA, ModelSurface->w, ModelSurface->h, 0, GL_BGR, GL_UNSIGNED_BYTE, ModelSurface->pixels); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST); glBufferData(GL_ARRAY_BUFFER, sizeof(points), points.data(), GL_STATIC_DRAW); glVertexAttribPointer(3, 3, GL_FLOAT, GL_FALSE,num_bytes ,points.data()); glEnableVertexAttribArray(3); //Translation Process GLfloat TranslationMatrix[] = { 1.0, 0.0, 0.0, 0.0, 0.0, 1.0, 0.0, 0.0, 0.0, 0.0, 1.0, 1.0, 0.0, 0.0, 0.0, 1.0 }; //Send Translation Matrix up to the vertex shader glUniformMatrix4fv(translation, 1, TRUE, TranslationMatrix); glDrawElements( GL_QUADS, faces.size(), GL_UNSIGNED_INT, faces.data()); I tried looking at what was causing this and went through every function every parameter ,etc looked at the man pages. Then found out that it could be my glVertexAttribPointer. Here are the man pages for glVertexAttribPointer http://www.opengl.org/sdk/docs/man/xhtml/glVertexAttribPointer.xml The last 2 parameters is my problem How do I write those 2 last parameters do I try putting the data from Points into it?. glVertexAttribPointer(3, 3, GL_FLOAT, GL_FALSE,num_bytes ,points.data()); How does it work with vectors? Is it fast?* if you can not be bothered too look at the man pages here is the scripts coming from the man pages directly. Stride Specifies the byte offset between consecutive generic vertex attributes. If stride is 0, the generic vertex attributes are understood to be tightly packed in the array. The initial value is 0. Pointer Specifies a pointer to the first component of the first generic vertex attribute in the array. The initial value is 0. If you want my full source - http://ideone.com/fPfkg Thanks Again if you do read this.

    Read the article

  • Permanently Sync a wiimote with a computer

    - by Adam Geisweit
    i have tried to look up many ways to sync up my wiimotes to my computer so that i can program games with it, but every time it only syncs them up temporarily, or if it says it can permanently sync it, it doesn't actually do it. it gets tiresome when i have to keep on reconnecting it every time i want to save battery life. how would i be able to sync up my wiimote to my computer so that if i turn off my wiimote, i can just hit any button and it will automatically sync it up?

    Read the article

  • What is the practical use of IBOs / degenerate vertex in OpenGL?

    - by 0xFAIL
    Vertices in 3D models CAN get cut in the process of optimizing 3D geometry, (degenerate vertices) by 3D graphics software (Blender, ...) when exporting because they aren't needed when reusing a vertex for multiple triangles. (In the current case 3D data is exported from Blender as .ply and read by a simple application that displays the 3D model) Every vertex has a few attributes like position, color, normal, tangent,... But the data for each vertex that is cut through the vertex sharing is lost and is missing in the vertex shader. Modern shader techniques like Bump or Normal mapping require normals/tangents per vertex which are also cut. To use complex shader techniques IBOs must not be used? Or is there a way to use IBOs and retain the data per vertex that was origionally lost?

    Read the article

  • Collision within a poly

    - by G1i1ch
    For an html5 engine I'm making, for speed I'm using a path poly. I'm having trouble trying to find ways to get collision with the walls of the poly. To make it simple I just have a vector for the object and an array of vectors for the poly. I'm using Cartesian vectors and they're 2d. Say poly = [[550,0],[169,523],[-444,323],[-444,-323],[169,-523]], it's just a pentagon I generated. The object that will collide is object, object.pos is it's position and object.vel is it's velocity. They're both 2d vectors too. I've had some success to get it to find a collision, but it's just black box code I ripped from a c++ example. It's very obscure inside and all it does though is return true/false and doesn't return what vertices are collided or collision point, I'd really like to be able to understand this and make my own so I can have more meaningful collision. I'll tackle that later though. Again the question is just how does one find a collision to walls of a poly given you know the poly vertices and the object's position + velocity? If more info is needed please let me know. And if all anyone can do is point me to the right direction that's great.

    Read the article

  • How can I select an audio output device in directshow

    - by Vibhore Tanwer
    I was wondering how I can select the output device for audio in directshow. I am able to get available audio output devices in directshow. But how can I make one of these to be audio output device. Its always going for the default audio device. I want to be able to output audio on my choice of device. I have been struggling through google but couldn't find anything useful. All I could get was this link but it doesn't really solve my problem. Any help will be really helpful for me.

    Read the article

  • What is causing these visual artifacts on my OpenGL sprites?

    - by Amplify91
    What could be the cause of the defects in my characters sprite? I am using OpenGL ES 2.0. I draw my sprites in a sprite batch that uses UV coordinates from one large texture atlas. If you look around the character' edges, you'll see two noticeable problems: The invisible alpha background is not invisible, but shows a strange static-like background. There are unwanted streaks where the character nears the edge of the frame (but only in some frames of the animation, this happened to be one of them). Any idea what could be causing these? I will provide related code if asked for, but I'll try to avoid just dumping the entire project and expecting someone to look through it all. EDIT: Here's a bit of code: This is how I generate my UV coordinates: private float[] createFrameUV(int frameWidth, int frameHeight, int x, int y){ float[] uv = new float[4]; if(numberOfFrames>1){ float width = (float)frameWidth / (float)mBitmap.getWidth(); float height = (float)frameHeight / (float)mBitmap.getHeight(); float u = (float)x / (float)mBitmap.getWidth(); float v = (float)y / (float)mBitmap.getHeight(); uv[0] = u; uv[1] = v; uv[2] = u + width; uv[3] = v + height; }else{ uv[0] = 0f; uv[1] = 0f; uv[2] = 1f; uv[3] = 1f; } return uv; } These are some OpenGL settings: GLES20.glTexParameterf(GLES20.GL_TEXTURE_2D, GLES20.GL_TEXTURE_MIN_FILTER, GLES20.GL_LINEAR); GLES20.glTexParameterf(GLES20.GL_TEXTURE_2D, GLES20.GL_TEXTURE_MAG_FILTER, GLES20.GL_LINEAR); GLES20.glTexParameterf(GLES20.GL_TEXTURE_2D, GLES20.GL_TEXTURE_WRAP_S, GLES20.GL_CLAMP_TO_EDGE); GLES20.glTexParameterf(GLES20.GL_TEXTURE_2D, GLES20.GL_TEXTURE_WRAP_T, GLES20.GL_CLAMP_TO_EDGE);

    Read the article

  • How do I create a curved line or filled circle or generally a circle using C++/SDL?

    - by NoobScratcher
    Hello I've been trying for ages to make a pixel circle using the putpixel function provided by SDL main website here is that function : void putpixel(int x,int y , int color , SDL_Surface* surface) { unsigned int *ptr = static_cast <unsigned int *> (surface->pixels); int offset = y * (surface->pitch/sizeof(unsigned int)); ptr[offset + x] = color; } and my question is how do I curve a line or create an circle arc of pixels or any other curved shape then a rectangle or singular pixel or line. for example here are some pictures filled pixel circle below enter link description here now my idea was too change the x and y value of the pixel position using + and - to create the curves but in practice didn't provide the correct results what my results are in this is to be able to create a circle that is made out of pixels only nothing else. thank you for anyone who takes the time to read this question thanks! :D

    Read the article

  • Sending changes to a terrain heightmap over UDP

    - by Floomi
    This is a more conceptual, thinking-out-loud question than a technical one. I have a 3D heightmapped terrain as part of a multiplayer RTS that I would like to terraform over a network. The terraforming will be done by units within the gameworld; the player will paint a "target heightmap" that they'd like the current terrain to resemble and units will deform towards that on their own (a la Perimeter). Given my terrain is 257x257 vertices, the naive approach of sending heights when they change will flood the bandwidth very quickly - updating a quarter of the terrain every second will hit ~66kB/s. This is clearly way too much. My next thought was to move to a brush-based system, where you send e.g. the centre of a circle, its radius, and some function defining the influence of the brush from the centre going outwards. But even with reliable UDP the "start" and "stop" messages could still be delayed. I guess I could compare timestamps and compensate for this, although it'd likely mean that clients would deform verts too much on their local simulations and then have to smooth them back to the correct heights. I could also send absolute vert heights in the "start" and "stop" messages to guarantee correct data on the clients. Alternatively I could treat brushes in a similar way to units, and do the standard position + velocity + client-side prediction jazz on them, with the added stipulation that they deform terrain within a certain radius around them. The server could then intermittently do a pass and send (a subset of) recently updated verts to clients as and when there's bandwidth to spare. Any other suggestions, or indications that I'm on the right (or wrong!) track with any of these ideas would be greatly appreciated.

    Read the article

  • Trouble with AABB collision response and physics

    - by WCM
    I have been racking my brain trying to figure out a problem I am having with physics and basic AABB collision response. I am fairly close as the physics are mostly right. Gravity feels good and movement is solid. The issue I am running into is that when I land on the test block in my project, I can jump off of it most of the time. If I repeatedly jump in place, I will eventually get stuck one or two pixels below the surface of the test block. If I try to jump, I can become free of the other block, but it will happen again a few jumps later. I feel like I am missing something really obvious with this. I have two functions that support the detection and function to return a vector for the overlap of the two rectangle bounding boxes. I have a single update method that is processing the physics and collision for the entity. I feel like I am missing something very simple, like an ordering of the physics vs. collision response handling. Any thoughts or help can be appreciated. I apologize for the format of the code, tis prototype code mostly. The collision detection function: public static bool Collides(Rectangle source, Rectangle target) { if (source.Right < target.Left || source.Bottom < target.Top || source.Left > target.Right || source.Top > target.Bottom) { return false; } return true; } The overlap function: public static Vector2 GetMinimumTranslation(Rectangle source, Rectangle target) { Vector2 mtd = new Vector2(); Vector2 amin = source.Min(); Vector2 amax = source.Max(); Vector2 bmin = target.Min(); Vector2 bmax = target.Max(); float left = (bmin.X - amax.X); float right = (bmax.X - amin.X); float top = (bmin.Y - amax.Y); float bottom = (bmax.Y - amin.Y); if (left > 0 || right < 0) return Vector2.Zero; if (top > 0 || bottom < 0) return Vector2.Zero; if (Math.Abs(left) < right) mtd.X = left; else mtd.X = right; if (Math.Abs(top) < bottom) mtd.Y = top; else mtd.Y = bottom; // 0 the axis with the largest mtd value. if (Math.Abs(mtd.X) < Math.Abs(mtd.Y)) mtd.Y = 0; else mtd.X = 0; return mtd; } The update routine (gravity = 0.001f, jumpHeight = 0.35f, moveAmount = 0.15f): public void Update(GameTime gameTime) { Acceleration.Y = gravity; Position += new Vector2((float)(movement * moveAmount * gameTime.ElapsedGameTime.TotalMilliseconds), (float)(Velocity.Y * gameTime.ElapsedGameTime.TotalMilliseconds)); Velocity.Y += Acceleration.Y; Vector2 previousPosition = new Vector2((int)Position.X, (int)Position.Y); KeyboardState keyboard = Keyboard.GetState(); movement = 0; if (keyboard.IsKeyDown(Keys.Left)) { movement -= 1; } if (keyboard.IsKeyDown(Keys.Right)) { movement += 1; } if (Position.Y + 16 > GameClass.Instance.GraphicsDevice.Viewport.Height) { Velocity.Y = 0; Position = new Vector2(Position.X, GameClass.Instance.GraphicsDevice.Viewport.Height - 16); IsOnSurface = true; } if (Collision.Collides(BoundingBox, GameClass.Instance.block.BoundingBox)) { Vector2 mtd = Collision.GetMinimumTranslation(BoundingBox, GameClass.Instance.block.BoundingBox); Position += mtd; Velocity.Y = 0; IsOnSurface = true; } if (keyboard.IsKeyDown(Keys.Space) && !previousKeyboard.IsKeyDown(Keys.Space)) { if (IsOnSurface) { Velocity.Y = -jumpHeight; IsOnSurface = false; } } previousKeyboard = keyboard; } This is also a full download to the project. https://www.box.com/s/3rkdtbso3xgfgc2asawy P.S. I know that I could do this with the XNA Platformer Starter Kit algo, but it has some deep flaws that I am going to try to live without. I'd rather go the route of collision response via an overlay function. Thanks for any and all insight!

    Read the article

  • Depth buffer values reset on change shader?

    - by bobobobo
    I have 2 different shaders, and when I change the shader (glUseProgram), it seems that the depth information is lost, because everything drawn with the 2nd shader appears completely on top of anything drawn by the first shader. If I switch the order of shader use/drawing, then it's the same (the last drawn object always appears on top of the first drawn object if there is a shader change between the 2 objects, even if the last drawn object is further away)

    Read the article

  • Beginner question about vertex arrays in OpenGL

    - by MrDatabase
    Is there a special order in which vertices are entered into a vertex array? Currently I'm drawing single textures like this: glBindTexture(GL_TEXTURE_2D, texName); glVertexPointer(2, GL_FLOAT, 0, vertices); glTexCoordPointer(2, GL_FLOAT, 0, coordinates); glDrawArrays(GL_TRIANGLE_STRIP, 0, 4); where vertices has four "xy pairs". This is working fine. As a test I doubled the sizes of the vertices and coordinates arrays and changed the last line above to: glDrawArrays(GL_TRIANGLE_STRIP, 0, 8); since vertices now contains eight "xy pairs". I do see two textures (the second is intentionally offset from the first). However the textures are now distorted. I've tried passing GL_TRIANGLES to glDrawArrays instead of GL_TRIANGLE_STRIP but this doesn't work either. I'm so new to OpenGL that I thought it's best to just ask here :-) Cheers!

    Read the article

  • How to transform mesh components?

    - by Lea Hayes
    I am attempting to transform the components of a mesh directly using a 4x4 matrix. This is working for the vertex positions, but it is not working for the normals (and probably not the tangents either). Here is what I have: // Transform vertex positions - Works like a charm! vertices = mesh.vertices; for (int i = 0; i < vertices.Length; ++i) vertices[i] = transform.MultiplyPoint(vertices[i]); // Does not work, lighting is messed up on mesh normals = mesh.normals; for (int i = 0; i < normals.Length; ++i) normals[i] = transform.MultiplyVector(normals[i]); Note: The input matrix converts from local to world space and is needed to combine multiple meshes together.

    Read the article

  • Isometric layer moving inside map

    - by gronzzz
    i'm created isometric map and now trying to limit layer moving. Main idea, that i have left bottom, right bottom, left top, right top points, that camera can not move outside, so player will not see map out of bounds. But i can not understand algorithm of how to do that. It's my layer scale/moving code. - (void)touchBegan:(UITouch *)touch withEvent:(UIEvent *)event { _isTouchBegin = YES; } - (void)touchMoved:(UITouch *)touch withEvent:(UIEvent *)event { NSArray *allTouches = [[event allTouches] allObjects]; UITouch *touchOne = [allTouches objectAtIndex:0]; CGPoint touchLocationOne = [touchOne locationInView: [touchOne view]]; CGPoint previousLocationOne = [touchOne previousLocationInView: [touchOne view]]; // Scaling if ([allTouches count] == 2) { _isDragging = NO; UITouch *touchTwo = [allTouches objectAtIndex:1]; CGPoint touchLocationTwo = [touchTwo locationInView: [touchTwo view]]; CGPoint previousLocationTwo = [touchTwo previousLocationInView: [touchTwo view]]; CGFloat currentDistance = sqrt( pow(touchLocationOne.x - touchLocationTwo.x, 2.0f) + pow(touchLocationOne.y - touchLocationTwo.y, 2.0f)); CGFloat previousDistance = sqrt( pow(previousLocationOne.x - previousLocationTwo.x, 2.0f) + pow(previousLocationOne.y - previousLocationTwo.y, 2.0f)); CGFloat distanceDelta = currentDistance - previousDistance; CGPoint pinchCenter = ccpMidpoint(touchLocationOne, touchLocationTwo); pinchCenter = [self convertToNodeSpace:pinchCenter]; CGFloat predictionScale = self.scale + (distanceDelta * PINCH_ZOOM_MULTIPLIER); if([self predictionScaleInBounds:predictionScale]) { [self scale:predictionScale scaleCenter:pinchCenter]; } } else { // Dragging _isDragging = YES; CGPoint previous = [[CCDirector sharedDirector] convertToGL:previousLocationOne]; CGPoint current = [[CCDirector sharedDirector] convertToGL:touchLocationOne]; CGPoint delta = ccpSub(current, previous); self.position = ccpAdd(self.position, delta); } } - (void)touchEnded:(UITouch *)touch withEvent:(UIEvent *)event { _isDragging = NO; _isTouchBegin = NO; // Check if i need to bounce _touchLoc = [touch locationInNode:self]; } #pragma mark - Update - (void)update:(CCTime)delta { CGPoint position = self.position; float scale = self.scale; static float friction = 0.92f; //0.96f; if(_isDragging && !_isScaleBounce) { _velocity = ccp((position.x - _lastPos.x)/2, (position.y - _lastPos.y)/2); _lastPos = position; } else { _velocity = ccp(_velocity.x * friction, _velocity.y *friction); position = ccpAdd(position, _velocity); self.position = position; } if (_isScaleBounce && !_isTouchBegin) { float min = fabsf(self.scale - MIN_SCALE); float max = fabsf(self.scale - MAX_SCALE); int dif = max > min ? 1 : -1; if ((scale > MAX_SCALE - SCALE_BOUNCE_AREA) || (scale < MIN_SCALE + SCALE_BOUNCE_AREA)) { CGFloat newSscale = scale + dif * (delta * friction); [self scale:newSscale scaleCenter:_touchLoc]; } else { _isScaleBounce = NO; } } }

    Read the article

  • Proper updating of GeoClipMaps

    - by thr
    I have been working on an implementation of gpu-based geo clip maps, but there is a section of the GPU Gems 2 article that i just can't seem to understand, specifically this paragraph and more precisely the bolded part: The choice of grid size n = 2k-1 has the further advantage that the finer level is never exactly centered with respect to its parent next-coarser level. In other words, it is always offset by 1 grid unit either left or right, as well as either top or bottom (see Figure 2-4), depending on the position of the viewpoint. In fact, it is necessary to allow a finer level to shift while its next-coarser level stays fixed, and therefore the finer level must sometimes be off-center with respect to the next-coarser level. An alternative choice of grid size, such as n = 2k-3, would provide the possibility for exact centering Let's take an example image from the article: My "understanding" of the way the clip maps were update was that you floor the position of the viewpoint to an int, and such get the center vertex point if this is not the same as the previous center point, you update the entire map. Now, this obviously is not the case - but what I am failing to understand is this: If you look at the image above, if the viewpoint was to move one unit to the right, then the inner ring (the one just around the view point + white center square) would end up getting a 1 unit space on both the left and right side of itself. But there is nothing in the paper that deals with this, what i mean is that it would end up looking like this (excuse my crummy cut-and-paste editing of the above image): This is obviously not a valid state of the. So, would the solution be that a clip ring (layer) can only move in increments of the ring/layer it's contained within? Wouldn't this end up being very restrictive? I feel like I am missing some crucial understanding of parts of the algorithm, but I have been over both this paper and the original paper from 2004 and I just can't see what I am not getting.

    Read the article

  • Estimated budget for RockBand 3 character creator feature [closed]

    - by milesmeow
    I want to get an idea of the budget required to make something akin to the Rock Band 3 character creator. We won't have the same level of detail for creating the base character, i.e. no face feature customization. We essentially want some very basic body sizing and want a bunch of clothing and accessories that the characters can try on. The clothing and accessories need to adapt and fit to the body types/shapes. The character should also support movement...and the clothes should move with the body. I've asked a similar question here regarding the development effort but not necessarily a budget. Do you think it's a $1M job? Most of the effort will go into creating the character models and the clothing models. The rest of the effort will go towards the user interface to navigate the customization features.

    Read the article

  • Why does my 3D model not translate the way I expect? [closed]

    - by ChocoMan
    In my first image, my model displays correctly: But when I move the model's position along the Z-axis (forward) I get this, yet the Y-axis doesnt change. An if I keep going, the model disappears into the ground: Any suggestions as to how I can get the model to translate properly visually? Here is how Im calling the model and the terrain in draw(): cameraPosition = new Vector3(camX, camY, camZ); // Copy any parent transforms. Matrix[] transforms = new Matrix[mShockwave.Bones.Count]; mShockwave.CopyAbsoluteBoneTransformsTo(transforms); Matrix[] ttransforms = new Matrix[terrain.Bones.Count]; terrain.CopyAbsoluteBoneTransformsTo(ttransforms); // Draw the model. A model can have multiple meshes, so loop. foreach (ModelMesh mesh in mShockwave.Meshes) { // This is where the mesh orientation is set, as well // as our camera and projection. foreach (BasicEffect effect in mesh.Effects) { effect.EnableDefaultLighting(); effect.PreferPerPixelLighting = true; effect.World = transforms[mesh.ParentBone.Index] * Matrix.CreateRotationY(modelRotation) * Matrix.CreateTranslation(modelPosition); // Looking at the model (picture shouldnt change other than rotation) effect.View = Matrix.CreateLookAt(cameraPosition, modelPosition, Vector3.Up); effect.Projection = Matrix.CreatePerspectiveFieldOfView( MathHelper.ToRadians(45.0f), aspectRatio, 1.0f, 10000.0f); effect.TextureEnabled = true; } // Draw the mesh, using the effects set above. prepare3d(); mesh.Draw(); } //Terrain test foreach (ModelMesh meshT in terrain.Meshes) { foreach (BasicEffect effect in meshT.Effects) { effect.EnableDefaultLighting(); effect.PreferPerPixelLighting = true; effect.World = ttransforms[meshT.ParentBone.Index] * Matrix.CreateRotationY(0) * Matrix.CreateTranslation(terrainPosition); // Looking at the model (picture shouldnt change other than rotation) effect.View = Matrix.CreateLookAt(cameraPosition, terrainPosition, Vector3.Up); effect.Projection = Matrix.CreatePerspectiveFieldOfView( MathHelper.ToRadians(45.0f), aspectRatio, 1.0f, 10000.0f); effect.TextureEnabled = true; } // Draw the mesh, using the effects set above. prepare3d(); meshT.Draw(); DrawText(); } base.Draw(gameTime); } I'm suspecting that there may be something wrong with how I'm handling my camera. The model rotates fine on its Y-axis.

    Read the article

  • Need a bounding box for CCSprite that includes all children/subchildren

    - by prototypical
    I have a CCSprite that has CCSprite children, and those CCSprite children have CCSprite children. The contentSize property doesn't seem to include all children/subchildren, and seems to only work for the base node. I could write a recursive method to traverse a CCSprite for all children/subchildren and calculate a proper boundingbox, but am curious as to if I am missing something and it's possible to get that information without doing so. I'l be a little surprised if such a method doesn't exist, but I can't seem to find it.

    Read the article

  • Quaternion LookAt for camera

    - by Homar
    I am using the following code to rotate entities to look at points. glm::vec3 forwardVector = glm::normalize(point - position); float dot = glm::dot(glm::vec3(0.0f, 0.0f, 1.0f), forwardVector); float rotationAngle = (float)acos(dot); glm::vec3 rotationAxis = glm::normalize(glm::cross(glm::vec3(0.0f, 0.0f, 1.0f), forwardVector)); rotation = glm::normalize(glm::quat(rotationAxis * rotationAngle)); This works fine for my usual entities. However, when I use this on my Camera entity, I get a black screen. If I flip the subtraction in the first line, so that I take the forward vector to be the direction from the point to my camera's position, then my camera works but naturally my entities rotate to look in the opposite direction of the point. I compute the transformation matrix for the camera and then take the inverse to be the View Matrix, which I pass to my OpenGL shaders: glm::mat4 viewMatrix = glm::inverse( cameraTransform->GetTransformationMatrix() ); The orthographic projection matrix is created using glm::ortho. What's going wrong?

    Read the article

  • Import FBX with multiple meshes into UDK

    - by Tom
    I used this script to generate a few buildings that I was hoping to import into UDK. Each building is made of about 1000 separate objects. When I export a building as FBX and import the file into UDK it breaks it up into its individual objects again, so I was wondering how I would avoid this. Whether there was a tool to combine all of the objects into one mesh automatically before exporting or if I could prevent UDK from breaking them upon import.

    Read the article

  • Rotation and translation like in GTA 1 OpenGL

    - by user1876377
    Okay, so I have a figure in XZ plain. I want to move it forward/backward and rotate at it's own Y axis, then move forward again in the rotation's direction, like the character in GTA 1. Code so far: Init: spaceship_position = glm::vec3(0,0,0); spaceship_rotation = glm::vec3(0,0,0); spaceship_scale = glm::vec3(1, 1, 1); Draw: glm::mat4 transform = glm::scale<float>(spaceship_scale) * glm::rotate<float>(spaceship_rotation.x, 1, 0, 0) * glm::rotate<float>(spaceship_rotation.y, 0, 1, 0) * glm::rotate<float>(spaceship_rotation.z, 0, 0, 1) * glm::translate<float>(spaceship_position); drawMesh(spaceship, texture, transform); Update: switch (key.keysym.sym) { case SDLK_UP: spaceship_position.z += 0.1; break; case SDLK_DOWN: spaceship_position.z -= 0.1; break; case SDLK_LEFT: spaceship_rotation.y += 1; break; case SDLK_RIGHT: spaceship_rotation.y -= 1; break; } So this only moves on the Z axis, but how can I move the object on both Z and X axis where the object is facing?

    Read the article

< Previous Page | 445 446 447 448 449 450 451 452 453 454 455 456  | Next Page >