Search Results

Search found 16415 results on 657 pages for 'computer'.

Page 451/657 | < Previous Page | 447 448 449 450 451 452 453 454 455 456 457 458  | Next Page >

• Server 2003 RAS Server Utilising High WAN Traffic

  - by Joe Sergeant

  We have Routing and Remote Access configured on Server 2003 (also our primary domain controller), allowing users to connect in remotely to access files, email, etc. With one user, the RAS Server is constantly sending data to that user's remote computer. From 9am this morning it has transferred almost 800MB. The user isn't transferring any files remotely, certainly not enough to total 800MB anyway. None of the other remote users have had this issue. We have ensured that the user in question has "Use default gateway on remote network" disabled for both IPv4 and IPv6 and we are fairly confident that Offline Files isn't trying to synchronise with the server remotely, too. My question is two-fold. Firstly, has anyone had a similar experience? Secondly, what would be the best software to discover exactly what data is being sent to the remote user?

  Read the article

• Is 192.168.122.1 a valid IP?

  - by Louise Hoffman

  From my understanding the networks is as follows Class A: 10.0.0.1 - 10.255.255.254 Class B: 172.16.0.1 - 172.16.255.254 Class C: 192.168.0.1 - 192.168.0.254 But then I look at ifconfig virbr0 on my Linux computer: virbr0 Link encap:Ethernet HWaddr 42:40:99:CB:02:7F inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:16 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:2842 (2.7 KiB) Here the IP address is 192.168.122.1. Is that an allowed IP? And if so, is 192.168 than actually a Class B network?

  Read the article

• nautilus crash when merging/overwriting files

  - by sBlatt

  On my Ubuntu 10.10, whenever I want to copy some files/folders over some other files/folders, or when I try to empty the trash, nautilus crashes! Example: I have a folder with some files. Now I want to overwrite this folder with a folder with the same name, same files, but some additional files, the merge window comes up, I choose merge and nautilus crashes (does not respond, when I press the close button I can force close it). Some times it even does the copying/emptying (trash), but it always crashes! This happens when copying to the same partition/ntfs partition/netshares, but not when I make a new folder and copy the files/folders into that (without overwriting anything). On a netshare, it's even possible to merge these files afterwards with another computer! dmesg/syslog/messages does not show any entry related to that problem. Does anyone have a solution for this very annoying problem? EDIT: dpkg -l nautilus* (see output in pastebin) EDIT2: I found out, nautilus already crashes before clicking replace/merge (as soon as the question appeares. In the video it's not entirely clear, that i click the cross before the force-close dialog appeares. Video of problem nautilus-debug-log.txt EDIT3: Filed bugreport: https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/678233

  Read the article

• Dropped Dell XPS has hard-drive trouble

  - by Alex B.

  Yesterday, my mom dropped her laptop to the floor and got the blue screen of death after trying to boot the system. I was able to start a Fedora live CD and get some of her stuff off the hard drive, but I cannot seem to be able to install Windows on it. The installation starts loading files and then the computer turns off. I am thinking that she might need a new hard drive. Any ideas? Edit: I actually was able to boot the Windows XP installation but it is saying that no hard disk is detected. How can this be possible if I was able to mount the drive on fedora yesterday?

  Read the article

• LinkSys WRT54GL + AM200 in half-bridge mode - UK setup guide recommendations?

  - by Peter Mounce

  Crossposted from here I am basically looking for a good guide on how to set up my home network with this set of hardware. I need: Dynamic DNS Firewall + port-forwarding VPN Wake-on-LAN from outside firewall VOIP would be nice QoS would be nice (make torrents take lower priority to other services when those other services are happening) DHCP Wireless + WPA2 security Ability to play multiplayer computer games I am not a networking or computing neophyte, but the last time I messed with network gear was a few years ago, so am needing to dust off knowledge I kinda half have. I have read that I should be wanting to set up the AM200 in half-bridge mode, so that the WRT54GL gets the WAN IP - this sounds like a good idea, but I'd still like to be advised. I have read that the dd-wrt firmware will meet my needs (though I gather I'll need the vpn-specific build, which appears to preclude supporting VOIP), but I'm not wedded to using it. I live in the UK and my ISP supplies me with: a block of 8 static IPs, of which 5 are usable to me a PPPoA ADSL2+ connection

  Read the article

• LinkSys WRT54GL + AM200 in half-bridge mode - UK setup guide recommendations?

  - by Peter Mounce

  I am basically looking for a good guide on how to set up my home network with this set of hardware. I need: Dynamic DNS Firewall + port-forwarding VPN Wake-on-LAN from outside firewall VOIP would be nice QoS would be nice (make torrents take lower priority to other services when those other services are happening) DHCP Wireless + WPA2 security Ability to play multiplayer computer games I am not a networking or computing neophyte, but the last time I messed with network gear was a few years ago, so am needing to dust off knowledge I kinda half have. I have read that I should be wanting to set up the AM200 in half-bridge mode, so that the WRT54GL gets the WAN IP - this sounds like a good idea, but I'd still like to be advised. I have read that the dd-wrt firmware will meet my needs (though I gather I'll need the vpn-specific build, which appears to preclude supporting VOIP), but I'm not wedded to using it. I live in the UK and my ISP supplies me with: a block of 8 static IPs, of which 5 are usable to me a PPPoA ADSL2+ connection

  Read the article

• what are some good interview questions for a position that consists of reviewing code for security vulnerabilities?

  - by John Smith

  The position is an entry-level position that consists of reading C++ code and identifying lines of code that are vulnerable to buffer overflows, out-of-bounds reads, uncontrolled format strings, and a bunch of other CWE's. We don't expect the average candidate to be knowledgeable in the area of software security nor do we expect him or her to be an expert computer programmer; we just expect them to be able to read the code and correctly identify vulnerabilities. I guess I could ask them the typical interview questions: reverse a string, print a list of prime numbers, etc, but I'm not sure that their ability to write code under pressure (or lack thereof) tells me anything about their ability to read code. Should I instead focus on testing their knowledge of C++? Ask them if they understand what a pointer is and how bitwise operators work? My only concern about asking that kind of question is that I might unfairly weed out people who don't happen to have the knowledge but have the ability to acquire it. After all, it's not like they will be writing a single line of code, and it's not like we are looking only for people who already know C++, since we are willing to train the right candidate. (It is true that I could ask those questions only to those candidates who claim to know C++, but I'd like to give the same "test" to everyone.) Should I just focus on trying to get an idea of their level of intelligence? In other words, should I get them to talk and pay attention to the way they articulate their thoughts, and so on?

  Read the article

• Is it possible to restrict fileserver access to domain users using computers that are members of the domain?

  - by Chris Madden

  It seems domain isolation can be used to accomplish, but I'd like a solution that doesn't require IPsec, or more accurately, doesn't require IPsec on the fileserver. IPsec if done in software has a large CPU overhead and our NAS boxes don't support any kind of offload. The goal is to avoid authenticated users using non-managed machines to access network resources. Network Access Protection (NAP) and the various enforcement points looked promsiing but I couldn't find a bulletproof way to use them [which doesn't require IPsec on the fileserver]. I was thinking when a domain user accesses the NAS box it will first need a Kerberos ticket from AD, so if AD could somehow verify the computer that was requesting the ticket was in the domain I'd have a solution.

  Read the article

• Installing linux on a crippled machine via network boot?

  - by networkbooter

  I have a somewhat ancient Toshiba laptop (which can't boot from USB) that I want to install linux on (probably Ubuntu). I'm currently running Windows XP and Ubuntu via Wubi. I want to delete these OSs and replace with Ubuntu only. The laptop does have a network boot option. I'm wondering if the easiest way might be to setup a network boot server on my other computer (which runs Ubunutu) and boot the laptop from it. Could this allow me to install Linux on the laptop? I can't seem to find instructions on the 'net as to how to go about doing this.

  Read the article

• Is there such thing as a "theory of system integration"?

  - by Jeff

  There is a plethora of different programs, servers, and in general technologies in use in organizations today. We, programmers, have lots of different tools at our disposal to help solve various different data, and communication challenges in an organization. Does anyone know if anyone has done an serious thinking about how systems are integrated? Let me give an example: Hypothetically, let's say I own a company that makes specialized suits a'la Iron Man. In the area of production, I have CAD tools, machining tools, payroll, project management, and asset management tools to name a few. I also have nice design space, where designers show off their designs on big displays, some touch, some traditional. Oh, and I also have one of these new fangled LEED Platinum buildings and it has number of different computer controlled systems, like smart window shutters that close when people are in the room, a HVAC system that adjusts depending on the number of people in the building, etc. What I want to know is if anyone has done any scientific work on trying to figure out how to hook all these pieces together, so that say my access control system is hooked to my payroll system, and my phone system allowing my never to swipe a time card, and to have my phone follow me throughout the building. This problem is also more than a technology challenge. Every technology implementation enables certain human behaviours, so the human must also be considered as a part of the system. Has anyone done any work in how effectively weave these components together? FYI: I am not trying to build a system. I want to know if anyone has thoroughly studied the process of doing a large integration project, how they develop their requirements, how they studied the human behaviors, etc.

  Read the article

• Battery not recognized on my laptop (and it recognizes my laptop as a desktop)

  - by AZorin

  I have installed Ubuntu (both 10.10 and 11.04 pre-release) on my laptop but my battery is not recognized and it is detected as a desktop system rather than a laptop. I have tried to get the output of cat /proc/acpi/battery/BAT1/state but the directory doesn't exist. I have tried another guide to paste the battery info into this directory but it doesn't allow me to do that and says that the directory doesn't exist, even though I'm trying to make it. I tried it in root Nautilus and even on an install of Lubuntu (with a root file manager) but it still failed to budge. I really don't know what to do as I have tried all the guides on the internet that I could find. Is there any way to change the configuration file(s) that detect the internal hardware of the computer. The /proc directory is a temporary RAM directory afaik. Is there a directory where that data is stored permanently and where the RAM reads if you know what I mean? Thanks in advance. AZorin This issue has been reported as bug #764513.

  Read the article

• install grub on pendrive containing linux installation, making it system independent

  - by arpit

  i have a win7 system and i want to install debian 6 on usb flash drive. the problem is grub loader. i want to install the grub loader on usb itself, so i can just plug in the pendrive in any computer and boot to deb6. so in effect making the flash drive an independent system. i tried it earlier, but ended up with grub loader needing me to insert the pendrive every time to give me boot options to even boot the win7 system, even though it was on primary hdd. so is there a way to turn the pendrive into full linux system with own boot loader, which can automatically detect os in the system i plug it in and be able to boot any of them. totally, self sufficient and system independent; making the pen drive so that it only needs a host system to run the os it carries. thank you, waiting for replies.

  Read the article

• How can I connect to my Airport Extreme Shared Disk using Windows?

  - by matt ryan

  I have a shared disk attached to my Airport Extreme, which I can connect to remotely in OS X through the finder via command - k, and entering in the proper address: afp://test.dyndns.org:1111 1111 being the port I've reserved for the disk in the AE port mapping. This is such a great feature, but I don't always have access to a Mac. My question is how can I connect to this drive via Windows XP? Please note, that the shared drive is a Drobo FS and formatted to handle both Windows and Mac OS. I've tried mapping a network drive via My Computer - Tools - Map Network Drive and entering: \\test.dyndns.org:1111\Drobo-Name I've also tried Start - Run and entering the same, both with and without the port #.

  Read the article

• Social-network, online community, company and job reviews, salaries statistics and much more.. Do we have it? Do we need it?

  - by Vlad Lazarenko

  I have many friends from Ukraine who are programmers. So I found out that they have a web site that collects, organizes and analyzing information about IT companies, which includes location, feedbacks, company reviews from current and former employees etc. They also collect programming salaries and organize them by language, region etc. That web site is ran by programmers and for programmers, all information is absolutely public and free. Plus, web site has forums, and people can discuss (more or less social than specific programming stuff) things, publish articles, news etc. I personally think that is useful, especially for those who are new in this industry. For example, you may do a small research and find out that, for example, Java programmers getting paid more than PHP programmers but demand is lower. Or you get an offer from the company, is about to accept it, but read reviews and find out that they don't even provide internet access at work and if you need to download something, you have to ask your manager to do it for you, and managers share a single computer that has internet connection to get that stuff for you (there is only one such company in Kiev, Ukraine, called SMK, for Software Mac Kiev, a big shame). So the question is - do we have something like it in US? Or at least, say, for New York region? Or state? All information I managed to find online is inaccurate or not full. Forums are very specific. If we don't have it, would you be interested in creating such a portal? Thanks!

  Read the article

• Lost "VGA Display" color profile in OS X

  - by Justin Love

  OS X Display settings used to have a color profile named VGA Display, which I found quite usefully for finding color problems before hooking up a projector. Currently, this profile (along with a number of others I've collected from projectors in the past year) is not available. I'm currently OS X 10.6.6 and my best guess is the profiles got wiped out during the last upgrade. None of the available color profiles seem to stink quite enough. Am I overlooking a renamed profile? Is there somewhere I could get a 'VGA Display' profile to install on my computer?

  Read the article

• BSOD > Help interpret this crash? [DMP file]

  - by feed_me_code

  System just crashed, below here is event view details.. Been running GREAT for last few days.. First crash since.. DMP File link below.. Can someone please help interpret this crash? Thanks The computer has rebooted from a bugcheck. The bugcheck was: 0x000000d1 (0x00001000000102fd, 0x0000000000000002, 0x0000000000000000, 0xfffff88010143afd). A dump was saved in: C:\Windows\Minidump\052714-23010-01.dmp. Report Id: 052714-23010-01. https://www.dropbox.com/s/ag19ejkrddnjjct/052714-23010-01.dmp

  Read the article

• Remote location looses connectivity

  - by user24559

  I have a remote location that has constant internet access using DSL. The remote location only has three Linksys cameras that use the internet access with a router. There is no computer on the network. The router is configured to use the DYN.org service to keep the IP address updated if the internet provider assigns a new ip address. The problem I am having is the router after a period of time stops responding to incoming ping requests and the cameras are shown offline. However, if I keep one of the cameras constantly streaming data then the connection to all the cameras works just fine all the time. How can I keep the router from appearing to be sleeping and not responding to incoming requests? The router is the Linksys WRT300N.

  Read the article

• Intermittent ethernet connectivity

  - by Amey Jah

  I am facing a weird problem. I am connecting to my dsl modem via ethernet. After booting, sometimes Ubuntu 10.10 does not detect the eth0 card properly or does not connect to the modem. I have made the following observations: My modem is fully on. All indicators are on except ethernet, which is blinking continuously. My network indicator applet informs me that I am connected to modem, but I am not able to browse as it has not established connection with modem. I need to power off and on (restart) the modem several times OR disconnect/connect (via network applet) several times, before the system can establish a connection with the modem. Once it establishes the connection, the ethernet LED (on modem) stops blinking and glows continuously. However, I do not see this problem every time I reboot or start my computer. 3/5 time, it connects to the modem in a single attempt. Friends, I am not able to understand root cause of this problem. Plus I do not know what kind of logs should be attached. If you want any logs please give me command to run, and I will paste the result for you. Note: I ran system testing when above problem happened. Follow this link to download result.

  Read the article

• Metro Apps on Windows 8 aren't working with static IP behind auth proxy

  - by Kamal

  In Windows 8 Professional, Metro Apps and Windows Update do not work with static IP settings behind authenticated proxy server. They work with DHCP on the same proxy settings (we have DHCP for wifi and static IP for LAN, both using the same proxy server). IE, Chrome and other desktop apps work nicely with both. Metro apps worked with an auth proxy (DHCP only), when I changed their proxy settings from the "edit group policy" option: Start → Settings → Edit Group Policy → Computer Configuration → Administrative Templates → Network Isolation → Internet Proxy for Apps How can I fix this?

  Read the article

• LGA 1155 or LGA 2011? Which has a brighter future?

  - by Langdon

  I'd basically like to rehash this question, only 22 months later. The last system I built was in 2006, shortly after AMD came out with socket AM2. I was able to upgrade the processor on it 3 times and would love to do the same with my next computer. Since AMD seems to be lagging, I'm going for Intel this time. I've read that Intel changes chip sets all the time, so there's no safe bet. I also read (1 comment on 1 forum) that said LGA 2011 will have 8-core support, but LGA 1155 won't, which leads me to believe that LGA 2011 might be a better choice. Anyone have any good advice for me?

  Read the article

• Can I change the system's "Browse for Folder" dialog globally?

  - by Chris Phillips

  As far as I know, everyone hates the "Browse for Folder" dialog: This dialog is always too small, rarely remembers locations well, and worst of all: forces you to navigate your entire computer using a tedious tree structure. Now, to be fair, some of the problems are likely to do with how apps are invoking the control -- not setting a size or a default directory, etc. But the problem about the tedious tree control remains. Is there any way to customize your Windows installation to use a different control? Preferably an app/installer that does it for you safely, but dropping in a compatible DLL or similar technique would be okay too. Or are we stuck with this terrible control forever?

  Read the article

• data recovery from unallocated harddisk partition

  - by user42151

  Hi I accidentally deleted a partition which mainly served as space I put my data, labeled D: drive. The partition wasn't subsequently formatted though, following the delete incident. Obviously the D: drive doesn't show up as it usually does when I run Windows 7. In the "Computer Management", on clicking the Disk Management I clearly see the space is now labled as unallocated. question: How do I go about recovering my data. Perhaps what the effective data recovery software I can use to resolve this issue. Thanks

  Read the article

• data recovery from unallocated harddisk partition

  - by user36007

  Hi, I accidentally deleted a partition which mainly served as space I put my data, labeled D: drive. The partition wasn't subsequently formatted though, following the delete incident. Obviously the D: drive doesn't show up as it usually does when I run Windows 7. In the "Computer Management", on clicking the Disk Management I clearly see the space is now labled as unallocated. question: How do I go about recovering my data. Perhaps what the effective data recovery software I can use to resolve this issue. Thanks

  Read the article

• data recovery from unallocated harddisk partition

  - by user36007

  Hi, I accidentally deleted a partition which mainly served as space I put my data, labeled D: drive. The partition wasn't subsequently formatted though, following the delete incident. Obviously the D: drive doesn't show up as it usually does when I run Windows 7. In the "Computer Management", on clicking the Disk Management I clearly see the space is now labled as unallocated. question: How do I go about recovering my data. Perhaps what the effective data recovery software I can use to resolve this issue. Thanks

  Read the article

• Is a ext3 Linux filesystem byte order independent

  - by Lothar

  I have a good old HP-C3700 Workstation with PA-RISC CPU here that I would like to use as a subversion server for a very large repository. I just worry what happens if the workstation dies (everybody who knows this computer knows that it is running like an Abrams tank and unlikely to happen in the next decade). I'm using Debian Linux on this system. If the mainboard dies can I just plug the SCSI drive into a PC and read the files from a normal Intel Linux PC? Which software RAID levels would be safe?

  Read the article

< Previous Page | 447 448 449 450 451 452 453 454 455 456 457 458  | Next Page >