Search Results

Search found 13995 results on 560 pages for 'home'.

Page 452/560 | < Previous Page | 448 449 450 451 452 453 454 455 456 457 458 459  | Next Page >

  • Sharing disk volumes across OpenVZ guests to reduce Package Management Overhead

    - by andyortlieb
    Is it feasible to create a single "master" OpenVZ guest who would only be used for package management, and use something like mount --bind on several other OpenVZ guests sort of trick them into using the environment installed by the master guest? The point of this would be so that users can maintain their own containers, and yet stay in sync with the master development environment, so they'll always have the latest & greatest requirements without worrying too much about system administration. If they need to install their own packages, could put them in /opt, or /usr/local (or set a path to their home directory)? To rephrase, I would like several (developer's, for example) OpenVZ guests whose /bin, /usr (and so on...) actually refer to the same disk location as that of a master OpenVZ guest who can be started up to install and update common packages for the environment to be shared by all of this group of OpenVZ guests. For what it's worth, we're running Debian 6. Edit: I have tried mounting (bind, and readonly) /bin, /lib, /sbin, /usr in this fashion and it refuses to start the containers stating that files are already mounted or otherwise in use: Starting container ... vzquota : (error) Quota on syscall for id 1102: Device or resource busy vzquota : (error) Possible reasons: vzquota : (error) - Container's root is already mounted vzquota : (error) - there are opened files inside Container's private area vzquota : (error) - your current working directory is inside Container's vzquota : (error) private area vzquota : (error) Currently used file(s): /var/lib/vz/private/1102/sbin /var/lib/vz/private/1102/usr /var/lib/vz/private/1102/lib /var/lib/vz/private/1102/bin vzquota on failed [3] If I unmount these four volumes, and start the guest, and then mount them after the guest has started, the guest never sees them mounted.

    Read the article

  • Ubuntu : apt-get command error

    - by Wibowo Margito
    I work with Ubuntu 10.04 everyday. Several days ago, when I release command sudo apt-get install .... it run very good, no error. I also able to open websites with my browser with no proxy. But, today, I got error. Every time I release the command, the connection redirected to an IP in my local network. I can see it in the terminal window. Several days ago I tried to connect to the internet throught the IP, by SSH tunneling. But I forget what I have done and there is no way home. This is the output in terminal : deo@deo-laptop:~$ sudo apt-get update [sudo] password for deo: Err http://cx.archive.ubuntu.com lucid Release.gpg [ Could not connect to 10.7.7.15:3128 (10.7.7.15). - connect (110: Connection timed out) Err http://cx.archive.ubuntu.com/ubuntu/ lucid/main Translation-en_US Unable to connect to 10.7.7.15:3128: 10.7.7.15 is an adress in my local network. Somebody please help me :)

    Read the article

  • IIS Messing on Wordpress Permalinks or WP's fault?

    - by Jesus Rodriguez
    Hello, I had a problem and after some research I discovered the exactly point where is failing. blog.domain.com Is not working, it says that the page cannot be found (404) blog.domain.com/index.php Working as expected If you click on Home, it will says that the page cannot be found, if you try to preview a new post, it says that the page cannot be found... I can see every post btw. I run my blog on a Windows hosting using IIS. my permalink is this: /index.php/%postname% IIRC I had to use index.php because my IIS doesn't have URL rewriting. I have no problem with the index.php thing on the url, I have now a good SEO and I don't want to change my permalink but I Don't know why is not working now... just from one day to the next... It's a problem of WP or is just my host messing up? If is my blog, do you know what is causing this? (Just for create a concrete ticket about the exactly problem) Thank you.

    Read the article

  • Easy solution to monitoring & blocking connections to non-malicious services, IP's, and tracking companies

    - by binarybunny
    Our family lives in the middle of nowhere, so the only high-speed internet available is Verizon's 3G mobile broadband. We have the highest package available, yet continually go over the 10GB limit and get charged $10 every 1GB we go over. We run a business from home, so stopping when we hit the limit is not an option. I've found the majority of connections are to Google, Microsoft, Akamai, Facebook, and other web service companies (mainly google). I know these are harmless connections, but when it costs money for them to monitor our web activity it becomes a serious problem. Here's some things I've done, but I'm sure there's something else that could help before blocking a huge set of IP ranges: stopped using windows (on my machine) use MVPS host file on all computers use firefox on all computers (with don't track me option) ad block plugin on all browsers blocking google updates blocking windows updates block images in browsers (when possible) use comodo (paranoia-level style of blocking..) virus-free computers with ESET NOD32 bought router and installed dd-wrt in attempt to block connections more diligently (and throttle bandwidth if it comes to that) Anything I'm missing? I know Google analytics is on almost all websites, as well as FB like buttons but I would like to be able to stop these connections without blocking use of google services like gmail, etc. Any ideas?

    Read the article

  • Time Machine doesn't back up some folders/files (that it should)

    - by Eric
    MacBook Pro 17" (Snow Leopard) -- WD 2TB external drive MacBook Pro 13" (Snow Leopard) -- Seagate 1TB external drive I find that Time Machine sometimes doesn't back up new folders (and the files in them). This occurs both when I choose "Back Up Now" from the Time Machine icon in the Menu Bar and in TM's scheduled backups. These are not excluded folders (nor are then in the TM do-not-back-up list); they're perfectly normal folders (at various locations) inside my home folder. The only way to force them to be backed up is to restart the computer (unmounting & mounting the TM external disk does not help). There seems to be a correlation with new folders (i.e., it's more likely to happen that an entire new folder is not backed up), but this may just be observer bias (because those are the folders that I go check to see if they've been backed up). It's not computer dependent (it happens on two different computers). It's not external disk dependent (it happens on two different external disks). It's not time dependent (not restarting for several days does not fix the problem). What does a restart change that these other events don't? I'm considering deleting the /.fseventsd folder (without restarting the computer) to see if that helps. I haven't tried logging out and logging in (without restarting the computer).

    Read the article

  • How to give wife emergency access to logins, passwords, etc.?

    - by Torben Gundtofte-Bruun
    I'm the digital guru in my household. My wife is good with email and forum websites but she trusts me with all our important digital stuff -- such as online banking and other things that require passwords, but also family photos and the plethora of other digital things in a modern home. We discuss relevant actions but it's always me that executes the actions. If I should get "hit by a bus" then my wife would be thoroughly stranded -- she would have no idea what digital stuff is where on our computer, how to access it, what online accounts we have, and their login credentials are. It would also leave my many public appearances (personal websites, email accounts, social networks, etc.) unresolved. To complicate things, I'm one of those people who don't use password as my password everywhere; I use a mix of SuperGenPass and LastPass, and also two-factor authentication whenever possible. I don't have much hope that she would find her way through a written explanation of all that in a stressful situation. I could just tell her that she should ask my tech-savvy twin brother and then entrust him with my LastPass master passphrase. I feel that would have a high chance of success, but it's inelegant and leaves my wife without control of the information. How can I ensure that my wife has access to my digital remains?

    Read the article

  • 'txn-current-lock': Permission denied [500, #13] - Subversion + Apache Configuration Issue

    - by wfoster
    Current Setup Fedora 13 32bit Apache 2.2.16 Subversion repositories setup under /var/www/svn I have two different repositories under this directory so my /etc/httpd/conf.d/subversion.conf setup in this way; LoadModule dav_svn_module modules/mod_dav_svn.so LoadModule authz_svn_module modules/mod_authz_svn.so <Location /svn> DAV svn SVNListParentPath on SVNParentPath /var/www/svn <LimitExcept GET PROPFIND OPTIONS REPORT> AuthType Basic AuthName "Subversion Repository" AuthUserFile /etc/httpd/.htpasswd Require valid-user </LimitExcept> </Location> After copying over my repos and using; chmod 755 -R /var/www/svn chcon -R -t httpd_sys_content_t /var/www/svn chown apache:apache -R /var/www/svn I can browse my repos fine through the browser, and I can update all my working copies, however when I try to check in from anywhere I get the same error Can't open file '/var/www/svn/repo/db/txn-current-lock':Permission denied I have been working on this issue for a while now and cant seem to find a solution to my issues. It might be of some use to know that the repo existed on a different server before this, it has been now moved to this new server. Everything I have read seems to indicate that the permissions for apache are incorrect, however apache is set to run as User apache and Group apache. So as far as I can tell my setup is correct. The behavior is not though. Any Ideas? Solution The only way I was able to get this to work is to disable SELinux, it could also be done by setting the proper booleans with SELinux via setsetbool and getsebool since this is just a home server, I decided to disable SELinux and am reaping the benefits now.

    Read the article

  • Dual booting Linux/Win7, Grub refuses to load Win7

    - by JohnB
    Decided to give Linux Mint a try (Ubuntu's interface annoys me), so I installed it with the intention of dual booting with Windows 7. Installation went fine, but now I can only boot into Linux Mint. Grub lists two Windows 7 menu options, but selecting either of them causes an "unknown file system" error and dumps me into a Grub recovery prompt. There, I have to manually reset the root and prefix options, as they reset hd0,msdos6 when they should be hd0,msdos5. I ran Boot Repair twice, once to fix grub errors, once to rebuild the MBR, but it didn't fix anything. Here is the log: http://paste.ubuntu.com/1029675/ fdisk output: Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 1486249145 743021149 7 HPFS/NTFS/exFAT /dev/sda3 1486249982 1953523711 233636865 5 Extended /dev/sda5 1486249984 1945141247 229445632 83 Linux /dev/sda6 1945143296 1953523711 4190208 82 Linux swap / Solaris grub.cfg: ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sda1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 86184D18184D091F chainloader +1 } menuentry "Windows 7 (loader) (on /dev/sda2)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root 56D84F84D84F60FB chainloader +1 } ### END /etc/grub.d/30_os-prober ### I have found a few similar troubleshooting guides so far, but so far no amount of updating/configuring Grub has been successful. Last resort is, I suppose, use the W7 recovery disc and start over. Thanks in advance! Linux Mint 13 Maya, 64-bit Windows 7 Home Edition, 64-bit

    Read the article

  • Ubuntu 10.04 Keyboard and Mouse Freezing Problem

    - by nitbuntu
    I had a partition setup with Windows XP and Ubuntu 8.04 dual booting. I recently upgraded to Ubuntu 10.04 by installing fresh from CD but leaving the previous /home folder as is. Things seemed to be working fine, but started finding that my mouse and keyboard were freezing. After a quick search on the internet, I found the following suggestions as shown here:- Ubuntu Forums Here the suggestion was to:- Edit /etc/default/grub, go to the line that begins like: GRUB_CMDLINE_LINUX_DEFAULT= Change it to: GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi=off" After that, run this command: sudo update-grub and Reboot This seemed to have resolved the issue but after a couple of days I again find my mouse and keyboard freezing. I also find that my parallel port printer had also stopped working. I have saved the output of dmesg and my syslog. The first can be viewed here but the syslog had too many characters, so if someone can suggest an alternative to freetexthost, I can post it there. Moreover, if there is any other information that should be provided, do let me know. I do hope we can get to the bottom of this issue. Thank you in advance for any help that could be provided.

    Read the article

  • Cannot access certain URL on my wireless

    - by dehmann
    Problem: On my wireless network at home, there is one URL that I just cannot access with my browser: http://research.microsoft.com/ I have no problems with the Internet connection otherwise. But on that address I just get The connection was reset The connection to the server was reset while the page was loading. from Firefox. I am using a DSL modem (Westell) and Linksys wireless router (using DHCP). When I use my neighbor's wireless connection I can access the microsoft site without a problem. Additional technical details: But with my connection, here is what I get from nslookup. It is weird: It first cannot find the address, but after I look up another address it can find it: $ nslookup research.microsoft.com ;; connection timed out; no servers could be reached $ nslookup google.com Non-authoritative answer: Name: google.com Address: 72.14.204.104 Name: google.com Address: 72.14.204.147 Name: google.com Address: 72.14.204.99 Name: google.com Address: 72.14.204.103 $ nslookup research.microsoft.com Non-authoritative answer: Name: research.microsoft.com Address: 131.107.65.14 But even after nslookup finds it Firefox still cannot access it. Here is what traceroute says: $ traceroute http://research.microsoft.com/ traceroute: Warning: http://research.microsoft.com/ has multiple addresses; using 8.15.7.117 traceroute to http://research.microsoft.com/ (8.15.7.117), 64 hops max, 40 byte packets 1 dslrouter.westell.com (1XX.XXX.X.X) 4.515 ms 2.760 ms 3.072 ms 2 * * * Traceroute just to the IP: $ traceroute 131.107.65.14 traceroute to 131.107.65.14 (131.107.65.14), 64 hops max, 40 byte packets 1 dslrouter.westell.com (1XX.XXX.X.X) 11.912 ms 2.684 ms 2.808 ms 2 * * * Comparison: Traceroute to google.com IP: $ traceroute 72.14.204.99 traceroute to 72.14.204.99 (72.14.204.99), 64 hops max, 40 byte packets 1 dslrouter.westell.com (1XX.XXX.X.X) 6.428 ms 6.981 ms 117.099 ms 2 * * * Any comments / help?

    Read the article

  • "ImportError: No module named flask" - Trouble with nginx + uWSGI + Flask in a virtualenv setup

    - by vjk2005
    I got nginx + uWSGI running on localhost inside a virtualenv with a simple hello world program, but I get this error when I replace the hello world with a simple Flask app: File "./wsgi_configuration_module.py", line 1, in <module> from flask import Flask ImportError: No module named flask unable to load app mountpoint Here's the flask app (wsgi_configuration_module.py): from flask import Flask application = Flask(__name__) @application.route("/") def hello(): return "hello world" if __name__ == "__main__": application.run() uWSGI config (app_conf.xml): <uwsgi> <socket>127.0.0.1:9001</socket> <chdir>/srv/www/labs/application</chdir> <pythonpath>/srv/www</pythonpath> <module>wsgi_configuration_module</module> <callable>application</callable> <no-site>true</no-site> </uwsgi> nginx config: server { listen 80; server_name localhost; access_log /srv/www/labs/logs/access.log; error_log /srv/www/labs/logs/error.log; location / { include uwsgi_params; uwsgi_pass 127.0.0.1:9001; } location /static { root /srv/www/labs/public_html/static/; index index.html index.htm; } } virtualenv stored in ~/virtual_env with Python 2.7 + nginx + uWSGI + Flask installed in a virtualenv called basic. Things I've tried to solve this: set the --home (-H) option to my virtualenv folder ~/virtual_env while running uWSGI. Other info: I have the same setup working outside of a virtualenv. Things go wrong only when I try to replicate the setup inside of a virtualenv. Where have I gone wrong?

    Read the article

  • Why won't 2GB of ram across 3 of 4 slots work on my motherboard (max 2GB)?

    - by Andrew
    My desktop is an old home-built machine circa 200[5-6] running Ubuntu 11.10 (but this is not relevant because I'm reading available ram from BIOS loading screen), with an ASUS P5GPL motherboard, not X or X-SE - it has four slots. I'm mainly a laptop person, but keep this around for running a server from if needed, backing up to, seeding Ubuntu to people from, etc… It has four (DDR) ram slots, two black and two blue, in the order black-blue-black-blue (I will call them D, C, B, and A, respectively) with some space in the middle. The blue ones are the closest to the processor. I used to have two 512MB chips in the two blue slots. I just got a 1GB chip and plugged it into one of the black slots; my system didn't recognize it. I messed around and discovered that it will not recognize chips in many positions, and I couldn't get it to recognize all three of these chips at the same time. In particular, if I put the 512MB chips in A and B it would only use 1, but AC, AD, BD, and CD worked. I didn't try BC, I believe. Only some of these continue to work when I switch the 1GB chip into one of these positions. Can I have some advice as to how to position these chips to get all 2GB used? How about if I get another 1GB chip - where should I put the two? And what about the RAM maximum Crucial says? Can I go above 2GB, if I get another 1GB chip? Right now, I have a 512MB chip in A and the 1GB chip in C. EDIT: I read some other posts and tried dmidecode in Ubuntu to clarify the max memory question, that wasn't a major part anyways. It says my max memory module size is 1024M (OK) and my max memory size is 4096M (doesn't agree with Crucial OR the Asus web site, maybe it will only work while in Linux and BIOS won't OK it?).

    Read the article

  • nginx proxy_pass POST 404 errors

    - by Scott
    I have nginx proxying to an app server, with the following configuration: location /app/ { # send to app server without the /app qualifier rewrite /app/(.*)$ /$1 break; proxy_set_header Host $http_host; proxy_pass http://localhost:9001; proxy_redirect http://localhost:9001 http://localhost:9000; } Any request for /app goes to :9001, whereas the default site is hosted on :9000. GET requests work fine. But whenever I submit a POST request to /app/any/post/url it results in a 404 error. Hitting the url directly in the browser via GET /app/any/post/url hits the app server as expected. I found online other people with similar problems and added proxy_set_header Host $http_host; but this hasn't resolved my issue. Any insights are appreciated. Thanks. Full config below: server { listen 9000; ## listen for ipv4; this line is default and implied #listen [::]:80 default_server ipv6only=on; ## listen for ipv6 root /home/scott/src/ph-dox/html; # root ../html; TODO: how to do relative paths? index index.html index.htm; # Make site accessible from http://localhost/ server_name localhost; location / { # First attempt to serve request as file, then # as directory, then fall back to displaying a 404. try_files $uri $uri/ /index.html; # Uncomment to enable naxsi on this location # include /etc/nginx/naxsi.rules } location /app/ { # rewrite here sends to app server without the /app qualifier rewrite /app/(.*)$ /$1 break; proxy_set_header Host $http_host; proxy_pass http://localhost:9001; proxy_redirect http://localhost:9001 http://localhost:9000; } location /doc/ { alias /usr/share/doc/; autoindex on; allow 127.0.0.1; allow ::1; deny all; } }

    Read the article

  • Dell Studio 17 - turning off suddenly

    - by studiohack
    I have a Dell Studio 17 laptop, a refurbished model almost 2 years old...It is currently running Windows 7 32-bit, Home Premium. Via a clean install, it is a Vista upgrade machine...A while back, a problem started to develop while running Vista that it would suddenly just turn off. No warnings, messages, anything. It was like I had the battery out, then just unplugged it from the wall. Just like that. Over several months of this happening (or more), I've observed several things...First, it only seems to happen when I'm doing memory-intensive things, such as watching a online video full screen or running many applications in the background...Second, I can tell when it is about to "flip" as I've termed it, when the fan starts running...the computer gets really hot in places... Anyways, I'm pretty sure this is a hardware problem, because it still exists, even after a Vista-to-7 Upgrade...Is this true? Hardware vs. software? Is there anything I can do to fix this? Is it just a specific component or what? What do you recommend? Thanks!!

    Read the article

  • Compile php 5.3 ldap extension

    - by toups
    So trying to follow the very un-descriptive guide at my webhost for compiling a new php extension: **Compiling PHP 5.3 extensions You can also compile and load your own extensions. Here's how:** 1. Download and unpack the extension (from PECL, for instance). 2. If the extension is already compiled (most binary PHP loaders will be, for instance), skip to step 6. 3. /usr/local/php53/bin/phpize 4. ./configure --with-php-config=/usr/local/php53/bin/php-config 5. make 6. Copy the module to your .php/5.3/ directory. 7. Assuming your user is called "username" and your module is named "mymodule.so", add the following to your .php/5.3/phprc: extension = /home/username/.php/5.3/mymodule.so Downloaded Openldap stable release online, uploaded the unpacked gzip via ftp to my server, did step 3, 4, 5. Now on step 6 is says "copy the module...". My question is where is the module for me to copy? Sorry if it's obvious and I'm not seeing it; first time compiling a php extension :O

    Read the article

  • Why is windows 7 rejecting my key?

    - by acidzombie24
    I'm extremely confused. I have a genuine key and CD (I can take photos) and I am trying to install windows on my new tower. I believe this would be the 3rd PC i installed it (old, laptop now new tower). However i did change the HDD once but i doubt windows would think its a different computer bc of that. After going through phone activation it said i installed it on to many pcs..... i'm extremely confused. I'll be happy to deactivate it off my old tower if i knew how. I already grabbed all the files off of it. I tried to look up the amount of boxes i can install windows home premium on and found this http://en.wikipedia.org/wiki/Windows_7_editions What stuck out was this Maximum physical CPUs supported[40] 1 1 1 2 2 2 My new tower has 4cores (its the intel i7) but has two threads each so it sees 8. Does that have anything to do with this? But apparently ultimate supports '2'. I'm sure windows support more than 2 cpus so... what gives? Actually its physically one CPU so i guess the number of cores doesn't matter? Why is windows 7 rejecting my key?

    Read the article

  • can't Remote desktop to windows XP, blaming the server side

    - by Jin
    After rebooting my work PC (windows XP sp3) this Wednesday (thank to Microsoft Tuesday), I found that I can't remote desktop to my work PC from home (with VPN to company). I have been remote-desktop to work for years and I am really surprised since connectivity is not the problem, so I brought up wireshark to sniff the packets. I can see after TCP handshake, client sent X.224 Connection Request 03 00 00 13 0e e0 00 00 00 00 00 01 00 08 00 03 00 00 00 server sent X.224 Connection Confirm. 03 00 00 0b 06 d0 00 00 12 34 00 According to "MS-RDPBCGR", the official spec on RDP, the server should include Negotiation Response in the "Connection Confirm" message but it didn't. It's empty. I googled a lot but didn't find any clue on why server did that. By the way, I used the same remote desktop client and can connect to other windows XP PC. Here are a couple of pieces of information that may help to give a clue: Since TCP handshake (server port being 3389), I believe the svchost service is actually running. going to control panel -- system window, --- "Remote" tab, the remote desktop is indeeded checked and it states that my username is allowed. according to the packet capture, client didn't even get a chance to tell server what user was trying to logon. Yes, the progress bar showed up a few seconds and then it went back to the "Remote desktop Connection" window again. Searched "windowsupdate.log", didn't find any appearance of the word "remote".

    Read the article

  • /etc/crontab or any user crontab is not being executed

    - by ian
    My server is CentOS 5. When I edit /etc/crontab or edit any user(including root) crontab via "crontab -e" command, it just adds "(system) RELOAD (/etc/crontab)" or "(admin) RELOAD (cron/admin)" in the log. No CMD in the /var/log/cron. Sample entry in /var/log/cron: Aug 10 10:21:33 localhost crontab[31688]: (root) BEGIN EDIT (root) Aug 10 10:21:42 localhost crontab[31688]: (root) REPLACE (root) Aug 10 10:21:42 localhost crontab[31688]: (root) END EDIT (root) Aug 10 10:22:01 localhost crond[2688]: (root) RELOAD (cron/root) Result of "service crond status": crond (pid 1345) is running... The command "cat /var/log/messages | grep cron" does not give anything. Contents of /etc/cron.allow: admin root Contents of /etc/crontab: SHELL=/bin/bash PATH=/sbin:/bin:/usr/sbin:/usr/bin MAILTO=root HOME=/ # run-parts 01 * * * * root run-parts /etc/cron.hourly 02 4 * * * root run-parts /etc/cron.daily 22 4 * * 0 root run-parts /etc/cron.weekly 42 4 1 * * root run-parts /etc/cron.monthly * * * * * root run-parts /bin/date >> /data/date.txt Result of ps aux |grep cron: root 1345 0.0 0.1 5268 1204 ? Ss 11:43 0:00 crond Contents of admin's crontab: * * * * * /bin/date >> /data/date.txt Note that it's not only admin's crontab that's not running. All cron jobs are not running. Any ideas why they aren't running?

    Read the article

  • How do I deny access to everybody but me in Windows 7?

    - by GregH
    I am trying to set up a file server on my my Windows 7 Pro system at home. I set up one common "Share" folder that I have shared/published. Within the share folder I want to have individual folders for me and my wife...that is only I can read/write my folder and only my wife can read/write to her folder and neither of us can read the contents of the other person's folder. Then I want to have a "public" folder where we can both read/write to contents of the folder as well as any sub-folders created, but my "kids" account can only read from this folder and sub folders. It seems really confusing to set up something like this and it really shouldn't. I am really confused between the "allow", "deny", and dimmed check boxes in the security tab. It seems that if I "Deny" access to "Everyone" on my private folder, then I don't even have access to it. Windows security seems backwards from the rest of the world's security models. If I am in two groups and I deny access to one of the groups but allow access to the other group then Windows security denies me access as I am in one of the groups that has access disallowed. Very confusing.

    Read the article

  • Apache Alias Isn't In Directory Listing

    - by Phunt
    I've got a site running on my home server that's just a front end for me to grab files remotely. There's no pages, just a directory listing (Options Indexes...). I wanted to add a link to a directory outside of the webroot so I made an alias. After a minute of dealing with permissions, I can now navigate to the directory by typing the URL into the browser, but the directory isn't listed in the root index. Is there a way to do this without creating a symlink in the root? Server: Ubuntu 11.04, Apache 2.2.19 Relevant vhost: <VirtualHost *:80> ServerName some.url.net DocumentRoot "/var/www/some.url.net" <Directory /var/www/some.url.net> Options Indexes FollowSymLinks AllowOverride None Order Allow,Deny Allow From All AuthType Basic AuthName "TPS Reports" AuthUserFile /usr/local/apache2/passwd/some.url.net Require user user1 user2 </Directory> Alias /some_alias "/media/usb_drive/extra files" <Directory "/media/usb_drive/extra files"> Options Indexes FollowSymLinks Order Allow,Deny Allow From All </Directory> </VirtualHost>

    Read the article

  • Remote Desktop access Windows 7 system from Windows 8

    - by Prabhat
    I have 2 systems; Windows 7 & Windows 8. Both are connected to WiFi router. They have been assigned address 192.168.2.8 & 192.168.2.9 respectively. I have added them to home group. I am able to ping and connect Windows 8 system from Windows 7. I am having trouble connecting Windows 7 system from Windows 8 system. I can't even ping Windows 7 system. Windows 7 system's user is administrator (default administrator account from secpol.msc). File sharing, Remote Access, network discovery are all enabled. Someone please help me connect. EDIT : I found that this is the issue of Kaspersky Internet Security 2012. If I disable firewall, it works. I tried opening port 3389 in Kaspersky. It is still blocking access.

    Read the article

  • Mail server: can't connect via POP/IMAP

    - by MelkerOVan
    I've followed this guide on setting up a mail server on my dedicated server. I've been able to send mails from the php application I'm using and the linux commandline (using telnet, php, etc). The problem is that I cannot connect to the server via IMAP/POP which I've setup using Courier. I've tried using thunderbird but it complains that the username or password is wrong. I doubt it is the username/password but I don't know how to trouble shoot this. Edit: Here's the messages in mail.log: Jan 9 22:43:38 mail authdaemond: received auth request, service=imap, authtype=login Jan 9 22:43:38 mail authdaemond: authmysql: trying this module Jan 9 22:43:38 mail authdaemond: SQL query: SELECT id, crypt, "", uid, gid, home, "", "", name, "" FROM users WHERE id = '[email protected]' AND (enabled=1) Jan 9 22:43:38 mail authdaemond: password matches successfully Jan 9 22:43:38 mail authdaemond: authmysql: sysusername=<null>, sysuserid=5000, sysgroupid=5000, homedir=/var/spool/mail/virtual, [email protected], fullname=peter, maildir=<null>, quota=<null>, options=<null> Jan 9 22:43:38 mail authdaemond: authmysql: clearpasswd=<null>, passwd=password Jan 9 22:43:38 mail authdaemond: Authenticated: sysusername=<null>, sysuserid=5000, sysgroupid=5000, homedir=/var/spool/mail/virtual, [email protected], fullname=peter, maildir=<null>, quota=<null>, options=<null> Jan 9 22:43:38 mail authdaemond: Authenticated: clearpasswd=peter, passwd=password Jan 9 22:43:38 mail imapd: chdir Maildir: No such file or directory

    Read the article

  • Why does the file date always change to the current date?

    - by Marshall
    We are a programming shop, but this i snot a programming question. My boss has put an external HD on the network. It contains the 'home' folders for users on the network. He uses it to place VB projects that he wants me to work on. But no matter what date and time he places a project on the drive, the file dates(modified) always shows the current date, though nothing in the files have changed. It makes it very hard to confirm that he has given me the latest versions. (He is not a fan of version control and nothing I do will convince him different.) Any ideas why this happens and how to prevent it from happening? P.S. As I wrote this I decided to add the last accessed date to the file display, and those dates happen to show the dates I expect to see. Why is the modified date getting changed, but not the accessed date. Does the accessed date change only when the files are opened or read, changed or not? Note: I use Directory Opus 9, a replacement for windows file browser. Thanks, Marshall

    Read the article

  • Mirror a RAID0 volume

    - by Ghostrider
    I have two SSD running in RAID0. The capacity and speed are just great. I use Windows Home Server to do incremental daily backups. This is fine and well and I've successfully restored from these backups. However. When one of the disks physically died. I was stuck without a working system until the replacement arrives so that I can restore the array from backup. WHS restoration takes about 5 hours which basically means that I'm losing entire day for the process. Is it possible to set up kind of a recovery volume for the RAID array? Use a single mechanical HDD that would be updated with the exact clone of the RAID array on a daily basis. This way if the array goes offline for some reason, I can just boot from the mechanical HDD, lose some perf but will still be able to work. The machine in question runs Windows 7. Creating RAID01 is not an option because of the high price of the SSD and the fact that it still doesn't protect against failure of RAID controller. Is there any way it can be set up?

    Read the article

  • Ubuntu 10.04 - Add RAID 1 Array?

    - by N Rahl
    I have an existing Ubuntu 10.04 desktop system setup and running on a hard drive (Drive A). I'd like to add 2 more hard drives (Drives B & C, same size) to the system and mount them as a RAID 1 array. How do I do that? I know how to create RAID arrays during the installation, but I don't want to reinstall my system, and I shouldn't have to since my system files will stay on their own drive separate from the RAID array. I've physically added both drives to the system, and formatted them as EXT3 with gparted. Ubuntu's disk utility has a "create raid" option, but it won't let me select any of my drives (it thinks they're all full). I don't mind using mdadm, but I've found several guides that are old, and give conflicting advice. Some say I have to edit an /etc/raidtab file, some say this is done automatically. So what's the current (Ubuntu 10.04) preferred way of adding a RAID 1 to an existing system? It should turn into a raid at boot, and mount itself in /home/myname/files/. Thanks!

    Read the article

< Previous Page | 448 449 450 451 452 453 454 455 456 457 458 459  | Next Page >