Search Results

Search found 28170 results on 1127 pages for '16 bit animation'.

Page 453/1127 | < Previous Page | 449 450 451 452 453 454 455 456 457 458 459 460  | Next Page >

• Server and Network Lag

  - by DanSpd

  At my home I have a server and my computer. Server has Windows Server 2008 Standart 64 bit installed and then my computer has Windows 7 64 bit installed. My home router is DIR-615 My server has a game server installed on it and basically total open connections on server are around 700. Once its around 700 server and then whole home network lags really badly. My internet connection is good and only around 600kb/s is being used out of 2mb/s (real download/upload speeds). So far I assume that my router has a connection limit and with server + my computer connections it peaks at around 1k and lags everything. Another assumption server lag comes from connection limit. On the internet I have read that standart version of server has connection limit of 700 + 10 reserved. I do not rmember where I found that information but it was on microsoft website. So I have two options. First is to upgrade my router to Netgear FVS318G-100 and second is to change connections limit on server. Any advices? Thank you

  Read the article

• Server and Network Lag

  - by DanSpd

  At my home I have a server and my computer. Server has Windows Server 2008 Standart 64 bit installed and then my computer has Windows 7 64 bit installed. My home router is DIR-615 My server has a game server installed on it and basically total open connections on server are around 700. Once its around 700 server and then whole home network lags really badly. My internet connection is good and only around 600kb/s is being used out of 2mb/s (real download/upload speeds). So far I assume that my router has a connection limit and with server + my computer connections it peaks at around 1k and lags everything. Another assumption server lag comes from connection limit. On the internet I have read that standart version of server has connection limit of 700 + 10 reserved. I do not rmember where I found that information but it was on microsoft website. So I have two options. First is to upgrade my router to Netgear FVS318G-100 and second is to change connections limit on server. Any advices? Thank you

  Read the article

• WD1000FYPS harddrive is marked 0 mb in 3ware (and no SMART)

  - by osgx

  After reboot my SATA 1TB WD1000FYPS (previously is was "Drive error") is marked 0 mb in 3ware web gui. Complete message: Available Drives (Controller ID 0) Port 1 WDC WD1000FYPS-01ZKB0 0.00 MB NOT SUPPORTED [Remove Drive] SMART gives me only Device Model and ATA protocol version 1 (not 7-8 as it must be for SATA) What does it mean? Just before reboot, when is was marked only with "Device Error", smart was: Device Model: WDC WD1000FYPS-01ZKB0 Serial Number: WD-WCASJ1130*** Firmware Version: 02.01B01 User Capacity: 1,000,204,886,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Sun Mar 7 18:47:35 2010 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled SMART overall-health self-assessment test result: PASSED SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0003 188 186 021 Pre-fail Always - 7591 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 229 5 Reallocated_Sector_Ct 0x0033 199 199 140 Pre-fail Always - 3 7 Seek_Error_Rate 0x000e 193 193 000 Old_age Always - 125 9 Power_On_Hours 0x0032 078 078 000 Old_age Always - 16615 10 Spin_Retry_Count 0x0012 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0012 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 77 192 Power-Off_Retract_Count 0x0032 198 198 000 Old_age Always - 1564 193 Load_Cycle_Count 0x0032 146 146 000 Old_age Always - 164824 194 Temperature_Celsius 0x0022 117 100 000 Old_age Always - 35 196 Reallocated_Event_Count 0x0032 199 199 000 Old_age Always - 1 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 What can be wrong with he? Can it be restored? PS new smart is === START OF INFORMATION SECTION === Device Model: WDC WD1000FYPS-01ZKB0 Serial Number: [No Information Found] Firmware Version: [No Information Found] Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 1 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Mon Mar 8 00:29:44 2010 MSK SMART is only available in ATA Version 3 Revision 3 or greater. We will try to proceed in spite of this. SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show if SMART supported. Checking for SMART support by trying SMART ENABLE command. Command failed, ata.status=(0x00), ata.command=(0x51), ata.flags=(0x01) Error SMART Enable failed: Input/output error SMART ENABLE failed - this establishes that this device lacks SMART functionality. A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options. PPS There was a rapid grow of " 192 Power-Off_Retract_Count " before dying. The hard was used in raid, with several hards from the same fabric packaging box (close id's). The hard drives were placed identically. Rapid means almost linear grow from 300 to 1700 in 6-7 hours. Maximal temperature was 41C. (thanks to munin's smart monitoring)

  Read the article

• monitoring a /21 for potential bad guys with snort and port mirroring

  - by Adeodatus

  Hi all, I want/need to start monitoring our network a bit better. Its an odd network in that it comprises 2 /22 public IPs and a slew of private admin IPs. I do have one point in the network where it all comes together and I can turn on port mirroring on the catalyst. From that port, I'd like to turn up a box running various utilities. Snort is high on my list but it'd be nice to also get some networking statistics with something like Netflow. So, what are peoeple's thoughts. I can turn up a box needed for this with a bit of ease. We have the hardware available. What should I run? I'd love to know what kind of nasty things are potentially going on but I'd also like to see statistics on what people are doing on the network so I can better tweak our systems to handle it better and improve performance. I'm open so please, give me some ideas to go along with what I've got.

  Read the article

• Using a 64bit Linux kernel, can't see more than 4GB of RAM in /proc/meminfo

  - by Chris Huang-Leaver

  I'm running my new computer which has 8GB of RAM installed, which is visable from BIOS page, does not show in /proc/meminfo uname -a Linux localhost 3.0.6-gentoo #2 SMP PREEMPT Sat Nov 19 10:45:22 GMT-- x86_64 AMD Phenom(tm) II X4 955 Processor AuthenticAMD GNU/Linux The result of /proc/meminfo is as follows: (thans Andrey) MemTotal: 4021348 kB MemFree: 1440280 kB Buffers: 23696 kB Cached: 1710828 kB SwapCached: 4956 kB Active: 1389904 kB Inactive: 841364 kB Active(anon): 1337812 kB Inactive(anon): 714060 kB Active(file): 52092 kB Inactive(file): 127304 kB Unevictable: 32 kB Mlocked: 32 kB SwapTotal: 8388604 kB SwapFree: 8047900 kB Dirty: 0 kB Writeback: 0 kB AnonPages: 492732 kB Mapped: 47528 kB Shmem: 1555120 kB Slab: 267724 kB SReclaimable: 177464 kB SUnreclaim: 90260 kB KernelStack: 1176 kB PageTables: 12148 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 10399276 kB Committed_AS: 3293896 kB VmallocTotal: 34359738367 kB VmallocUsed: 317008 kB VmallocChunk: 34359398908 kB AnonHugePages: 120832 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB DirectMap4k: 23552 kB DirectMap2M: 3088384 kB DirectMap1G: 1048576 kB I have tried using mem=8G as a kernel boot parameter, I read a post about setting HIGHMEM64G to yes, before realising that only applies to 32bit kernels. Trying dmindecode -t memory SMBIOS 2.7 present. Handle 0x0026, DMI type 16, 23 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: Multi-bit ECC Maximum Capacity: 32 GB Error Information Handle: Not Provided Number Of Devices: 4 Handle 0x0028, DMI type 17, 34 bytes Memory Device Array Handle: 0x0026 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 4096 MB Form Factor: DIMM Set: None Locator: DIMM0 Bank Locator: BANK0 Type: <OUT OF SPEC> Type Detail: Synchronous Speed: 1333 MHz Manufacturer: Manufacturer0 Serial Number: SerNum0 Asset Tag: AssetTagNum0 Part Number: Array1_PartNumber0 Rank: Unknown Handle 0x002A, DMI type 17, 34 bytes Memory Device Array Handle: 0x0026 Error Information Handle: Not Provided Total Width: Unknown Data Width: 64 bits Size: No Module Installed Form Factor: DIMM Set: None Locator: DIMM1 Bank Locator: BANK1 Type: Unknown Type Detail: Synchronous Speed: Unknown Manufacturer: Manufacturer1 Serial Number: SerNum1 Asset Tag: AssetTagNum1 Part Number: Array1_PartNumber1 Rank: Unknown Handle 0x002C, DMI type 17, 34 bytes Memory Device Array Handle: 0x0026 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 4096 MB Form Factor: DIMM Set: None Locator: DIMM2 Bank Locator: BANK2 Type: <OUT OF SPEC> Type Detail: Synchronous Speed: 1333 MHz Manufacturer: Manufacturer2 Serial Number: SerNum2 Asset Tag: AssetTagNum2 Part Number: Array1_PartNumber2 Rank: Unknown Handle 0x002E, DMI type 17, 34 bytes Memory Device Array Handle: 0x0026 Error Information Handle: Not Provided Total Width: Unknown Data Width: 64 bits Size: No Module Installed Form Factor: DIMM Set: None Locator: DIMM3 Bank Locator: BANK3 Type: Unknown Type Detail: Synchronous Speed: Unknown Manufacturer: Manufacturer3 Serial Number: SerNum3 Asset Tag: AssetTagNum3 Part Number: Array1_PartNumber3 Rank: Unknown

  Read the article

• Outlook 2007 / 2010 Calendar: hide meetings in specific category

  - by Jeroen

  Question Is there any easy way in Outlook 2007/2010 to show/hide meetings in a specific category? Preferably only for a specific view (the Month view, in this case). Note: I was almost done writing this question, adding just one more "What I've tried" option, when I found an acceptable (though imperfect) solution. Remembering this SE blog post I figured I might as well post it after all and answer it myself. And who knows, perhaps someone else has a more elegant solution. The reason for me personally is that I'd like to hide the "small, recurring meetings" like our daily stand-up meeting in the month view. I'd prefer an Outlook feature that is meant for this (there must be one for this, right?), but I'm open to workarounds or plugin suggestions as well. What I expected to find somewhere was a list of categories (with added option "No category") where you could select/deselect from which categories you'd see meetings. Something like this mock-up: What I've tried Edit "View Settings", and use a "Filter..." on categories. This has several disadvantages, the major one is that the filter only allows me to choose what I want to show, but not what I want to hide. Even if I tick all categories but one for the filter it would still hide any uncategorized meeting. Similar to 1, but then using Advanced filters. Still a bit clumsy as changing views can be up to three clicks, but this is the best solution so far (see the corresponding answer below). Creating a sub-calendar for these "small" meetings that I wish to hide. This felt a bit clumsy and like overkill, but did provide an easy "select/deselect" option to show/hide these meetings. Search for plug-ins that do this. Couldn't find one (yet).

  Read the article

• iptables (NAT/PAT) setup for SSH & Samba

  - by IanVaughan

  I need to access a Linux box via SSH & Samba that is hidden/connected behind another one. Setup :- A switch B C |----| |---| |----| |----| |eth0|----| |----|eth0| | | |----| |---| |eth1|----|eth1| |----| |----| Eg, SSH/Samba from A to C How does one go about this? I was thinking that it cannot be done via IP alone? Or can it? Could B say "hi on eth0, if your looking for 192.168.0.2, its here on eth1"? Is this NAT? This is a large private network, so what about if another PC has that IP?! More likely it would be PAT? A would say "hi 192.168.109.15:1234" B would say "hi on eth0, traffic for port 1234 goes on here eth1" How could that be done? And would the SSH/Samba demons see the correct packet header info and work?? IP info :- A - eth0 - 192.168.109.2 B - eth0 - B1 = 192.168.109.15 B2 = 172.24.40.130 - eth1 - 192.168.0.1 C - eth1 - 192.168.0.2 A, B & C are RHEL (RedHat) But Windows computers can be connected to the switch. I configured the 192.168.0.* IPs, they are changeable. Update after response from Eddie Few problems (and Machines' B IP is different!) From A :- ssh 172.24.40.130 works ok, (can get to B2) but ssh 172.24.40.130 -p 2022 -vv times out with :- OpenSSH_4.3p2, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to 172.24.40.130 [172.24.40.130] port 2022. ...wait ages... debug1: connect to address 172.24.40.130 port 2022: Connection timed out ssh: connect to host 172.24.40.130 port 2022: Connection timed out From B2 :- $ service iptables status Table: filter Chain INPUT (policy ACCEPT) num target prot opt source destination Chain FORWARD (policy ACCEPT) num target prot opt source destination 1 ACCEPT tcp -- 0.0.0.0/0 192.168.0.2 tcp dpt:22 Chain OUTPUT (policy ACCEPT) num target prot opt source destination Table: nat Chain PREROUTING (policy ACCEPT) num target prot opt source destination 1 DNAT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:2022 to:192.168.0.2:22 Chain POSTROUTING (policy ACCEPT) num target prot opt source destination Chain OUTPUT (policy ACCEPT) num target prot opt source destination And ssh from B2 to C works fine :- $ ssh 192.168.0.2 Route info :- $ route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.0.0 * 255.255.255.0 U 0 0 0 eth1 172.24.40.0 * 255.255.255.0 U 0 0 0 eth0 169.254.0.0 * 255.255.0.0 U 0 0 0 eth1 default 172.24.40.1 0.0.0.0 UG 0 0 0 eth0 $ ip route 192.168.0.0/24 dev eth1 proto kernel scope link src 192.168.0.1 172.24.40.0/24 dev eth0 proto kernel scope link src 172.24.40.130 169.254.0.0/16 dev eth1 scope link default via 172.24.40.1 dev eth0 So I just dont know why the port forward doesnt work from A to B2?

  Read the article

• TPROXY Not working with HAProxy, Ubuntu 14.04

  - by Nyxynyx

  I'm trying to use HAProxy as a fully transparent proxy using TPROXY in Ubuntu 14.04. HAProxy will be setup on the first server with eth1 111.111.250.250 and eth0 10.111.128.134. The single balanced server has eth1 and eth0 as well. eth1 is the public facing network interface while eth0 is for the private network which both servers are in. Problem: I'm able to connect to the balanced server's port 1234 directly (via eth1) but am not able to reach the balanced server via Haproxy port 1234 (which redirects to 1234 via eth0). Am I missing out something in this configuration? On the HAProxy server The current kernel is: Linux extremehash-lb2 3.13.0-24-generic #46-Ubuntu SMP Thu Apr 10 19:11:08 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux The kernel appears to have TPROXY support: # grep TPROXY /boot/config-3.13.0-24-generic CONFIG_NETFILTER_XT_TARGET_TPROXY=m HAProxy was compiled with TPROXY support: haproxy -vv HA-Proxy version 1.5.3 2014/07/25 Copyright 2000-2014 Willy Tarreau <[email protected]> Build options : TARGET = linux26 CPU = x86_64 CC = gcc CFLAGS = -g -fno-strict-aliasing OPTIONS = USE_LINUX_TPROXY=1 USE_LIBCRYPT=1 USE_STATIC_PCRE=1 Default settings : maxconn = 2000, bufsize = 16384, maxrewrite = 8192, maxpollevents = 200 Encrypted password support via crypt(3): yes Built without zlib support (USE_ZLIB not set) Compression algorithms supported : identity Built without OpenSSL support (USE_OPENSSL not set) Built with PCRE version : 8.31 2012-07-06 PCRE library supports JIT : no (USE_PCRE_JIT not set) Built with transparent proxy support using: IP_TRANSPARENT IPV6_TRANSPARENT IP_FREEBIND Available polling systems : epoll : pref=300, test result OK poll : pref=200, test result OK select : pref=150, test result OK Total: 3 (3 usable), will use epoll. In /etc/haproxy/haproxy.cfg, I've configured a port to have the following options: listen test1235 :1234 mode tcp option tcplog balance leastconn source 0.0.0.0 usesrc clientip server balanced1 10.111.163.76:1234 check inter 5s rise 2 fall 4 weight 4 On the balanced server In /etc/networking/interfaces I've set the gateway for eth0 to be the HAProxy box 10.111.128.134 and restarted networking. auto eth0 eth1 iface eth0 inet static address 111.111.250.250 netmask 255.255.224.0 gateway 111.131.224.1 dns-nameservers 8.8.4.4 8.8.8.8 209.244.0.3 iface eth1 inet static address 10.111.163.76 netmask 255.255.0.0 gateway 10.111.128.134 ip route gives: default via 111.111.224.1 dev eth0 10.111.0.0/16 dev eth1 proto kernel scope link src 10.111.163.76 111.111.224.0/19 dev eth0 proto kernel scope link src 111.111.250.250

  Read the article

• What is a good layout for a somewhat advanced home network and storage solution?

  - by Shaun

  My home network/storage needs are changing and I am searching for some opinions and starting points on what a good network/storage layout would be that can serve my needs for a few years into the future. I think I have a decent starting point for equipment, but I am also willing to invest fairly heavily in a solution that can last me for a while. I am a bit of a tech nerd and I have a moderate tolerance for setup of the solution. I would prefer if maintenance of the system is somewhat low once it is setup, but I am willing to accept some tradeoffs. Existing equipment: Router - Netgear WNDR3700 (gigabit) Router - DLink Gamerlounge DGL-4300 (gigabit) Switch - 16 port Trendnet green switch (gigabit) Switch - 5 port Trendnet green (gigabit) Computer - i7-950 office computer (gigabit ethernet) Computer - Q6600 quad core media center, hooked up to TV, records shows (gigabit ethernet) Computer - Acer 1810T ultraportable laptop (gigabit and N ethernet) NAS - Intel SS4200-E (gigabit) External hard drive - 2TB WD Green drive (esata) All kinds of miscellaneous network connected TV, Bluray, Verizon network extender, HDhomerun TV tuners, etc. Requirements: -Robust backup solution for a growing collection of huge family picture files and personal files, around 1.5TB. (Including offsite backup) -Central location for all user's files, while also keeping them secure from each other. -Storage for terabytes of movie backups and recorded TV, and access to them from all computers (maybe around 4TB eventually) -Possibility to host files to friends and family easily Nice to have: -Backup of terabytes of movie backups Intriguing possibilities: -Capability to have users' Windows desktops and files look the same from all network computers I am not sure if the new Windows Home Server 2011 would fit into this well, if I need a domain server, how best to organize my backups, or how to most effectively use RAID. Currently I am simply backing up all computers to a RAID 1 on the NAS box, which I was thinking could prevent a situation where I reach for a backup and find that the disk is corrupt. One possibility that I am thinking about now is simply using my media center PC with a huge RAID of hard drives on which all files are stored. Pseudo-backup of all files would be present because of the RAID, but important files would also be backed up off site via carrying hard drives to work. But what if corruption seeps into the files and the corrupted data is then backed up? Does RAID protect against this? I really want to take next to zero risks with the irreplaceable files. I can handle some degree of risk with the movies and other files. I'm looking for critiques on this idea as well as other possibilities. To summarize, my goal is high functionality, media capable, and robust backup of irreplaceable files.

  Read the article

• Problem while Installing mysql cluster

  - by Champion

  I downloaded latest mysql cluster file 64 bit (mysql-cluster-gpl-7.1.9-linux-x86_64-glibc23) from mysql site. Ran following command to install mysql server. /home/mysql_cluster/mysqlc/scripts/mysql_install_db --no-defaults --basedir=/home/mysql_cluster/mysqlc --datadir=/home/mysql_cluster/my_cluster/mysqld_data It's giving following issues. /home/mysql_cluster/mysqlc/scripts/mysql_install_db: line 245: /home/mysql_cluster/mysqlc/bin/my_print_defaults: No such file or directory Neither host 'db' nor 'localhost' could be looked up with /home/mysql_cluster/mysqlc/bin/resolveip Please configure the 'hostname' command to return a correct hostname. If you want to solve this at a later stage, restart this script with the --force option My host is pinging and hostname command gives correct hostname. I tried also with --force option force but still not working giving following issues: /home/mysql_cluster/mysqlc/scripts/mysql_install_db: line 245: /home/mysql_cluster/mysqlc/bin/my_print_defaults: No such file or directory Installing MySQL system tables... /home/mysql_cluster/mysqlc/scripts/mysql_install_db: line 393: /home/mysql_cluster/mysqlc/bin/mysqld: No such file or directory Installation of system tables failed! Examine the logs in /home/mysql_cluster/my_cluster/mysqld_data for more information. It says above files doesn't exist but this files are present checked with ls command. We are using XEN VM with 64 bit debian lenny os. How this issue can be resolved ?

  Read the article

• APC (PHP Cache) Uptime 0 minutes, not caching

  - by Jussi

  My goal is to implement APC for opcode cache for a drupal 6 production site. I have so far tested APC with several php files with and without including other php files with include_once. Also tried to tweak the apc.ini values for shm_size, apc.include_once_override and apc.stat. Restarted apache every time. Resulting in apc.php not showing any changes in any values. (except of course the changed apc.ini values are shown as they should) Every time i refresh the apc.php test page, the start time resets as the current time showing uptime 0 minutes. apc.php -testpage shows: General Cache InformationAPC Version 3.1.9 PHP Version 5.2.10 APC Host xxxx.xx.xx Server Software Apache/2.2.3 (CentOS) Shared Memory 1 Segment(s) with 128.0 MBytes (mmap memory, pthread mutex Locks locking) Start Time 2011/07/26 11:53:56 Uptime 0 minutes File Upload Support 1 Cached Files 0 ( 0.0 Bytes) Hits 1 Misses 1 Request Rate (hits, misses) 2.00 cache requests/second Hit Rate 1.00 cache requests/second Miss Rate 1.00 cache requests/second Insert Rate 0.00 cache requests/second Cache full count 0 Cached Variables 0 ( 0.0 Bytes) Hits 0 Misses 0 Request Rate (hits, misses) 0.00 cache requests/second Hit Rate 0.00 cache requests/second Miss Rate 0.00 cache requests/second Insert Rate 0.00 cache requests/second Cache full count 0 apc.cache_by_default 1 apc.canonicalize 1 apc.coredump_unmap 0 apc.enable_cli 0 apc.enabled 1 apc.file_md5 0 apc.file_update_protection 2 apc.filters apc.gc_ttl 3600 apc.include_once_override 0 apc.lazy_classes 0 apc.lazy_functions 0 apc.max_file_size 16 apc.mmap_file_mask /tmp/apcphp5.095eRm apc.num_files_hint 1024 apc.preload_path apc.report_autofilter 0 apc.rfc1867 0 apc.rfc1867_freq 0 apc.rfc1867_name APC_UPLOAD_PROGRESS apc.rfc1867_prefix upload_ apc.rfc1867_ttl 3600 apc.serializer default apc.shm_segments 1 apc.shm_size 128M apc.slam_defense 0 apc.stat 0 apc.stat_ctime 0 apc.ttl 7200 apc.use_request_time 1 apc.user_entries_hint 4096 apc.user_ttl 7200 apc.write_lock 1 Host Status Diagrams: Free: 128.0 MBytes (100.0%) Hits: 1 (50.0%) Used: 20.3 KBytes (0.0%) Misses: 1 (50.0%) Detailed Memory Usage and Fragmentation: Fragmentation: 0% phpinfo shows: Server API CGI/FastCGI APC: Version 3.1.9 APC Debugging Enabled MMAP Support Enabled MMAP File Mask /tmp/apcphp5.JkKDk7 Locking type pthread mutex Locks Serialization Support php Revision $Revision: 308812 $ Build Date Jul 21 2011 14:31:12 I followed these steps to find if suexec settings would prevent caching: http://www.litespeedtech.com/support/forum/showthread.php?t=4189 [root@host /]# ps -ef|grep lsphp root 20402 17833 0 11:21 pts/0 00:00:00 grep lsphp [root@host /]# ps -waux root 17833 0.0 0.1 5004 1484 pts/0 S 10:39 0:00 bash ..indicates that there is no lsphp running on the host also I read the following article and comments, concluding that in my case the problem is not the suexec as the user apache is the httpd process owner http://www.brandonturner.net/blog/2009/07/fastcgi_with_php_opcode_cache/ also suexec command is not recognized when logged and launced as root @ host also i'm almost confident that there is no cPanel running on the host to check if a setting there would reset the running cache process at some interval This leaves me with few clues where to head next. I tried to set (with chown and chgrp) apache as the owner of the apc.php file and some test php files resulting in 500 server error. Is there a way to check if the file permissions prevent the apc stay running? I'm tremendously grateful for any suggestions or help.

  Read the article

• Disable drop shadows around windows or the menu bar on OS X

  - by Lri

  Nocturne has an option for disabling shadows around windows. But it's only available in night mode, and changing the mode (like when opening the application) causes an annoying screen flash animation. There's no way to disable the shadow under the menu bar either. MacThemes Forum / Removing the menubar dropshadow has a link to a .psd for making special desktop backgrounds that cancel out the shadow under the menu bar. But it only works if that area of the desktop picture has a low enough brightness. Some applications that cover the desktop (like DeskShade) also cover the menu bar's shadow. That's not a real solution though. Unsanity's ShadowKiller stopped working in either 10.5 or 10.6. (It does still work on 10.7.2, but the website says "NOT compatible with Mac OS X 10.6 Leopard", and I couldn't get it to work on a 10.6 installation.) Related: How do I decrease the window shadow in Mac OS X? - Super User

  Read the article

• Online Storage and security concerns

  - by Megge

  I plan to set up a small fileserver. I already own a small server at HostEurope (VirtualServer L, 250GB space), but they don't offer enough space (there is the HostEurope Cloud, but paying for bandwidth isn't an option here, video-streaming should be possible) Requirements summarized: Storage: 2TB, Users: ~15, Filesizes: < 100GB, should be easily reachable (Mount as a networkdrive or at least have solid "communication" software) My first question would be: Where can I get halfway affordable online storages? And how should I connect them to my server? Getting an additional server is a bit overkill, as I know no hoster which allows 2 TB on a small 2 Ghz Dual Core 2 GB RAM thingy (that would be enough by far, I just need much space), and connecting it via NFS or FTP over Internet seems a bit strange and cripples performance. Do you have any advice where I could get that storage service from? (I sent HostEurope a custom request today, but they didn't answer till now. If they can provide me with that space, this question will be irrelevant, but the 2nd one is the more important one anway, don't do much more than recommend me some based on experience, you don't have to crawl hours through hosting services) livedrive for example offers 5 TB for 17€ / month, I'd be happy with 2 TB for 20 €, the caveat is: It doesn't allow multiple users, which leads me to my second question: Where are the security problems? Which protocol is sufficient (I want private and "public" folders etc. the usual "every user has its own and a public space"-thing), secure and fast? (I'd tend to (S)FTP, problem with FTP is: Most of those hosting services don't even allow FTP with mutliple users and single users lead me into "hacking" a solution (you could map the basic folder structure on the main server and just mount every subfolder from the storage, things get difficult with a public folder with 644 permissions though) Is useing something like PKI or 802.1X overkill for private uses?

  Read the article

• Nginx and PHP-FPM running out of connections

  - by E3pO

  I keep running into errors like these, [02-Jun-2012 01:52:04] WARNING: [pool www] seems busy (you may need to increase pm.start_servers, or pm.min/max_spare_servers), spawning 8 children, there are 19 idle, and 49 total children [02-Jun-2012 01:52:05] WARNING: [pool www] seems busy (you may need to increase pm.start_servers, or pm.min/max_spare_servers), spawning 16 children, there are 19 idle, and 50 total children [02-Jun-2012 01:52:06] WARNING: [pool www] seems busy (you may need to increase pm.start_servers, or pm.min/max_spare_servers), spawning 32 children, there are 19 idle, and 51 total children [02-Jun-2012 03:10:51] WARNING: [pool www] seems busy (you may need to increase pm.start_servers, or pm.min/max_spare_servers), spawning 8 children, there are 18 idle, and 91 total children I changed my settings for php-fpm to these, pm.max_children = 150 (It was at 100, i got a max_children reached and upped to 150) pm.start_servers = 75 pm.min_spare_servers = 20 pm.max_spare_servers = 150 Resulting in [02-Jun-2012 01:39:19] WARNING: [pool www] server reached pm.max_children setting (150), consider raising it I've just launched a new website that is getting a conciderable amount of traffic on it. This traffic is legitimate and users are getting 504 gateway timeouts when the limit is reached. I have limited connections to my server with IPTABLES and I'm running fail2ban and keeping track of nginx access logs. The traffic is all legitimate, i'm just running out of room for users. I'm currently running on a dual core box with ubuntu 64bit. free total used free shared buffers cached Mem: 6114284 5726984 387300 0 141612 4985384 -/+ buffers/cache: 599988 5514296 Swap: 524284 5804 518480 My php.ini max_input_time = 60 My nginx config is worker_processes 4; pid /var/run/nginx.pid; events { worker_connections 19000; # multi_accept on; } worker_rlimit_nofile 20000; #each connection needs a filehandle (or 2 if you are proxying) client_max_body_size 30M; client_body_timeout 10; client_header_timeout 10; keepalive_timeout 5 5; send_timeout 10; location ~ \.php$ { try_files $uri /er/error.php; fastcgi_split_path_info ^(.+\.php)(/.+)$; fastcgi_connect_timeout 60; fastcgi_send_timeout 180; fastcgi_read_timeout 180; fastcgi_buffer_size 128k; fastcgi_buffers 256 16k; fastcgi_busy_buffers_size 256k; fastcgi_temp_file_write_size 256k; fastcgi_max_temp_file_size 0; fastcgi_intercept_errors on; fastcgi_pass unix:/tmp/php5-fpm.sock; fastcgi_index index.php; include fastcgi_params; } What can I do to stop running out of connections? Why does this keep occurring? I'm monitoring my traffic on Google Analytics realtime and when the user count gets above about 120 my php-fpm.log is full of these warnings..

  Read the article

• Hardware Requirements & Tuning - Flash Media Server 3.5 Interactive

  - by Anthony Kanago

  I am trying to spec out a server to purchase (physically, not rented from someone like softlayer.com) to run an intranet instace of Flash Media Server 3.5 Interactive. In general, the server will likely be fielding somewhere on the order of 400 connections at a time at the upper limit. Of course, should this increase, we don't want to be stuck. While the decision is not final, we will likely be running the server on Red Hat rather than Windows. The server will be run on gigabit ethernet. I have two related questions: What sort of hardware would I need realistically to support this? What advice can you offer for settings in tuning FMS/the OS to be performant to this level? We are looking for a bare minimum that will run this effectively to save on costs. Realistically, the average number of connections will be fairly low (50-150) by comparison with that upper limit estimate. To reiterate: we just want to be cautious in not getting caught when we need more power, but we also need a low-cost solution (doesn't everyone?) and that may take priority. Windows and RedHat are the two officially supported operating systems. Since FMS is stated to be 32-bit only, I'm sticking with a 32-bit OS. The hardware requirements listed by Adobe on their website are: 3.2GHz Intel® Pentium® 4 processor (dual Intel Xeon® or faster recommended) 2GB of RAM (4GB recommended) 1Gb Ethernet card So what realistically do I need for those sorts of connection numbers, and what can I due to tune things up to get more out of less hardware? Thanks!

  Read the article

• How can I install Satchmo?

  - by Jonathan Hayward

  I am trying to install Satchmo 0.9 on an Ubuntu 9.10 32-bit guest off of the instructions at http://bitbucket.org/chris1610/satchmo/downloads/Satchmo.pdf. I run into difficulties at 2.1.2: pip install -r http://bitbucket.org/chris1610/satchmo/raw/tip/scripts/requirements.txt pip install -e hg+http://bitbucket.org/chris1610/satchmo/@v0.9#egg=satchmo The first command fails because a compile error for how it's trying to build PIL. So I ran an "aptitude install python-imaging", locally copy the first line's requirements.text, and remove the line that's unsuccessfully trying to build PIL. The first line completes without reported error, as does the second. The next step tells me to change directory to the /path/to/new/store, and run: python clonesatchmo.py A little bit of trouble here; I am told that clonesatchmo.py will be in /bin by now, and it isn't there, but I put some Satchmo stuff under /usr/local, create a symlink in /bin, and run: python /bin/clonesatchmo.py This gives: jonathan@ubuntu:~/store$ python /bin/clonesatchmo.py Creating the Satchmo Application Traceback (most recent call last): File "/bin/clonesatchmo.py", line 108, in <module> create_satchmo_site(opts.site_name) File "/bin/clonesatchmo.py", line 47, in create_satchmo_site import satchmo_skeleton ImportError: No module named satchmo_skeleton A find after apparently checking out the repository reveals that there is no file with a name like satchmo*skeleton* on my system. I thought that bash might be prone to take part of the second pip invocation's URL as the beginning of a comment; I tried both: pip install -e hg+http://bitbucket.org/chris1610/satchmo/@v0.9\#egg=satchmo pip install -e hg+http://bitbucket.org/chris1610/satchmo/@v0.9#egg=satchmo Neither way of doing it seems to take care of the import error mentioned above. How can I get a Satchmo installation under Ubuntu, or at least enough of a Satchmo installation that I am able to start with a skeleton of a store and then flesh it out the way I want? Thanks, Jonathan

  Read the article

• How can the little guys effectively learn and use puppet?

  - by drumfire

  Six months ago, in our not-for-profit project we decided to start migrating our system management to a Puppet controlled environment because we are expecting our number of servers to grow substantially between now and a year from now. Since the decision has been made our IT guys have become a bit too annoyed a bit too often. Their biggest objections are: "We're not programmers, we're sysadmins"; Modules are available online but many differ from one another; wheels are being reinvented too often, how do you decide which one fits the bill; Code in our repo is not transparent enough, to find how something works they have to recurse through manifests and modules they might have even written themselves a while ago; One new daemon requires writing a new module, conventions have to be similar to other modules, a difficult process; "Let's just run it and see how it works" Tons of hardly known 'extensions' in community modules: 'trocla', 'augeas', 'hiera'... how can our sysadmins keep track? I can see why a large organisation would dispatch their sysadmins to puppet courses to become puppet masters. But how would smaller players get to learn puppet to a professional level if they do not go to courses and basically learn it via their browser and editor?

  Read the article

• USB Wifi will not connect on Windows 7 (Even though the driver installs OK)

  - by Pete Roberts

  Windows 7 will not connect to a WiFi Netowrk using a USB Network Adapter. I have 3 adapters, A Senoa SUB 364 (EXT), a Repeatit SU2410 USB V2 and a ZYXEL G202. All of these devices install OK on Windows 7 Home Premium on my Destop PC (64 bit) and on my Asus Wii Netbook (32 bit). In each case the adapter can be enabled/disabled and the driver properties says it is working correctly. When I try and connect to a network Windows 7 behaves as though the adapter does not exist and reports no networks. The Wii has an integrated adapter which works perfectly under Windows and connects to either of the 3 networks available to me. I have done all the checks I can on the configuration. What seems odd to me is that it happens to all 3 devices on 2 different windows 7 PCs both of which are working perfectly in any other respect. This suggests the common denominator is me and I must be doing something wrong.. what's also strange is that I cannot find any similar problems being reported on any of the forums. From what reading I've been able to do it seems like the new wifi virtualisation thingy in W7 is not recognising the adapters which suggests I', missing a configuration option somewhere. Looking forward to finding out if I'm not alone or just being stupid. Pete

  Read the article

• Supervisord appears to be running, but monitored programs aren't launched

  - by Brad Montgomery

  I've got supervisord 3.0a8 installed from the system package on ubuntu 10.04 (64bit). The supervisor service appears to be running, but it's not launching the configured programs. Interestingly enough, this exact configuration is running on another system, and is working as expected. The main config file looks like this: ; /etc/supervisor/supervisord.conf [unix_http_server] chmod=0700 file=/var/run/supervisor.sock [supervisord] logfile=/var/log/supervisor/supervisord.log childlogdir=/var/log/supervisor pidfile=/var/run/supervisord.pid [rpcinterface:supervisor] supervisor.rpcinterface_factory = supervisor.rpcinterface:make_main_rpcinterface [supervisorctl] serverurl=unix:///var/run/supervisor.sock [include] files = /etc/supervisor/conf.d/*.conf A sample program config looks like this: ; /etc/supervisor/conf.d/sample.conf [program:sample] directory=/opt/sample command=/opt/sample/run.sh Where, the /opt/sample/run.sh is: #!/bin/bash while true; do T=`date` echo "[$T] Running!" >> /var/log/sample.log sleep 1 done And, here's some additional information regarding the running instance of supervisord: root@myhost:~# supervisorctl version 3.0a8 root@myhost:~# which supervisorctl /usr/bin/supervisorctl root@myhost:~# which supervisord /usr/bin/supervisord root@myhost:~# supervisorctl status # NOTE that there's no output! root@myhost:~# supervisorctl avail root@myhost:~# service supervisor status is running root@myhost:~# ps aux | grep supervisor root 21740 0.1 0.4 40772 10056 ? Ss 11:28 0:00 /usr/bin/python /usr/bin/supervisord root 21749 0.0 0.0 7624 932 pts/2 S+ 11:28 0:00 grep --color=auto supervisor root@myhost:~# cat /var/log/supervisor/supervisord.log 2012-04-26 11:28:22,483 CRIT Supervisor running as root (no user in config file) 2012-04-26 11:28:22,536 INFO RPC interface 'supervisor' initialized 2012-04-26 11:28:22,536 WARN cElementTree not installed, using slower XML parser for XML-RPC 2012-04-26 11:28:22,536 CRIT Server 'unix_http_server' running without any HTTP authentication checking 2012-04-26 11:28:22,539 INFO daemonizing the supervisord process 2012-04-26 11:28:22,539 INFO supervisord started with pid 21740 root@myhost:~# ll /etc/supervisor/conf.d/ total 28 drwxr-xr-x 2 root root 4096 2012-04-26 11:31 ./ drwxr-xr-x 3 root root 4096 2012-04-25 18:38 ../ -rw-r--r-- 1 root root 66 2012-04-26 11:31 sample.conf root@myhost:~# ll /opt/sample/ total 12 drwxr-xr-x 2 root root 4096 2012-04-26 11:32 ./ drwxr-xr-x 4 root root 4096 2012-04-26 11:31 ../ -rwxr-xr-x 1 root root 97 2012-04-26 11:32 run.sh* root@myhost:~# python Python 2.6.5 (r265:79063, Apr 16 2010, 13:57:41) [GCC 4.4.3] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> Any help is greatly appreciated!

  Read the article

• What open source ecommerce webshops offer #1: usability, #2: PayPal integration, and #3: ease of administration and use

  - by Jonathan Hayward

  I've spent several days trying to deploy Satchmo, in the process asking several questions about deployment (http://stackoverflow.com/questions/11277407/can-anyone-explain-this-error-message-deploying-a-satchmo-project-under-gunicorn, http://stackoverflow.com/questions/11277685/is-there-a-howto-to-fcgi-for-deploying-satchmo, and http://stackoverflow.com/questions/11278295/what-is-the-most-stable-release-of-satchmo). Django's tagline is "The web framework for perfectionists with deadlines," and Satchmo's tagline is equally forceful: "The webshop for perfectionists with deadlines." I'm looking more to set up, configure, design, etc., rather than code for this one, and I'm taking a bit of a hint that for me at least the "with deadlines" bit is something that I cannot manage. Deployment has been a time sink. So, taking a step back, I don't specifically need to edit and extend the source code; what I want are first, good usability and a clean experience for the end-user, then being easy to deploy/install/manage/maintain, and enough so that even if you're having a slow day it should at most be one day's work to install, one day's work to get running, and one day's work to rebrand as white label (for simple branding). What ecommerce webshops should I be looking at?

  Read the article

• IIS6 Virtual Directory 500 Error on Remote Share

  - by David

  We have our servers at the server farm in a domain. Let's call it LIVE. Our developer computers live in a completely separate corporate domain, miles and miles away. Let's call it CORP. We have a large central storage unit (unix) that houses images and other media needed by many webservers in the server farm. The IIS application pools run as (let's say) LIVE\MediaUser and use those credentials to connect to a central storage share as a virtual directory, retrieve the images, and serve them as if they were local on each server. The problem is in development. On my development machine. I log in as CORP\MyName. My IIS 6 application pool runs as Network Service. I can't run it as a user from the LIVE domain because my machine isn't (and can not be) joined to that domain. I try to create a virtual directory, point it to the same network directory, click Connect As, uncheck the "Always use the authenticated user's credentials when validating access to the network directory" checkbox so that I can enter the login info, enter the credentails for LIVE\MediaUser, click OK, verify the password, etc. This doesn't work. I get "HTTP Error 500 - Internal server error" from IIS. The IIS log file reports sc-status = 500, sc-substatus = 16, and sc-win32-status = 1326. The documentation says this means "UNC authorization credentials are incorrect" and the Win32 status means "Logon failure: unknown user name or bad password." This would be all and good if it were anywhere close to accurate. I double- and trouble-checked it. Tried multiple known good logins. The IIS manager allows me to view the file tree in its window, it's only the browser that kicks me out. I even tried going to the virtual directory's Directory Security tab, and under Authentication and Access Control, I tried using the same LIVE domain username for the anonymous access credential. No luck. I'm not trying to run any ASP, ASP.NET, or other dynamic anything out of the virtual directory. I just want IIS to be able to load static images, css, and js files. If anyone has some bright ideas I would be most appreciative!

  Read the article

• Data Protection Manager System Protection Backups Failing

  - by TrueDuality

  I'm just starting to setup DPM 2010 in a test environment with a Domain Controller and a File Server. Everything seem to be working fairly well and I can get all of my backup jobs to succeed except for the "Computer\System Protection" backups. Both servers are running fully up to date 64 bit Windows Server 2008 R2 Enterprise with Service Pack 1. The error that is being provided is: DPM cannot create a backup because Windows Server Backup (WSB) on the protected computer encountered an error (WSB Event ID: 517, WSB Error Code: 0x8078001D). (ID 30229 Details: Internal error code: 0x809909FB) This Microsoft Knowledge Base article describes the issue perfectly and provides a hotfix. I downloaded the hotfix, moved it onto the affected server, attempt to run it and receive the following error: The update is not applicable to your computer. I've verified that I have indeed downloaded the 64 bit version. According to this thread the hotfix got rolled into Service Pack 1, yet I'm still experiencing the issue. Both machines do have the Windows Server Backup feature installed. Can anybody point me in the right direction? What am I missing?

  Read the article

• EEE PC Keyboard malfunctioning - Ctrl key "sticks" after 10 seconds

  - by DWilliams

  I was given a EEE PC belonging to a friend of a friend to fix. The keyboard did not appear to work at all. I spent a while testing out various things, blowing the keyboard out, checking for damage, and so on. Nothing appeared to be physically wrong. At first I noticed that the keyboard appeared to work just fine for 10 seconds (on average, sometimes more sometimes less) after being powered on. It had been restored to the factory default xandros installation with no user set up, so I couldn't get in to mess with things since I couldn't type to make a user. I made an ubuntu live USB to boot it from, and managed to get the boot order changed to boot from USB in the ~10 seconds of working keyboard I had (I don't think I've ever had to rush around BIOS menus that quickly). After I got Ubuntu up on it, I played around a bit more and determined that apparently the ctrl key is stuck down (not literally, but it's on all the time). If I open gedit, pressing the "o" key brings the open dialog, "s" opens the save dialog, and all other behaviour you would expect to see if you were holding down the control key. The only exception that I noticed is the "9" and "0" keys. They function normally. Figuring that out I made a xandros user with a name/password consisting of 9's and 0's. I couldn't find any options in Xandros that could potentially be helpful. I'm not familiar with EEE PCs. Is it safe to assume that the keyboard is simply dead or could there be another problem? I don't want to purchase another keyboard for him if that isn't going to fix the problem. The netbook doesn't show any obvious signs of damage but the owner is a biker and very often has it with him on the road so it's been subjected to a good bit of vibration.

  Read the article

• libvirt qemu/kvm migration problem

  - by Panda

  I am using kvm and libvirt on my Dell server. Now i am trying to migrate one virtual machine from a physical server to another. However, I failed everytime. In virsh on physicalServer1, I typed: virsh # migrate virtualmachine1 qemu+ssh://username@physicalServer2/system error: operation failed: migration to 'tcp:physicalServer2:49163' failed: migration failed Then I searched FAQ part on libvirt.org. It says: error: operation failed: migration to '...' failed: migration failed This is an error often encountered when trying to migrate with QEMU/KVM. This typically happens with plain migration, when the source VM cannot connect to the destination host. You will want to make sure your hosts are properly configured for migration (see the migration section of this FAQ) I managed to ssh physicalServer2 from a shell on virtualmachine1 so the above red part did not explain my failure. I also open ports on physicalServer2, iptables -L shows following information: Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT udp -- anywhere anywhere udp dpt:domain ACCEPT tcp -- anywhere anywhere tcp dpt:domain ACCEPT udp -- anywhere anywhere udp dpt:bootps ACCEPT tcp -- anywhere anywhere tcp dpt:bootps ACCEPT udp -- anywhere anywhere udp dpt:domain ACCEPT tcp -- anywhere anywhere tcp dpt:domain ACCEPT udp -- anywhere anywhere udp dpt:bootps ACCEPT tcp -- anywhere anywhere tcp dpt:bootps ACCEPT tcp -- anywhere anywhere state NEW tcp dpts:49152:49215 Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere 192.168.122.0/24 state RELATED,ESTABLISHED ACCEPT all -- 192.168.122.0/24 anywhere ACCEPT all -- anywhere anywhere REJECT all -- anywhere anywhere reject-with icmp-port-unreachable REJECT all -- anywhere anywhere reject-with icmp-port-unreachable ACCEPT all -- anywhere 192.168.122.0/24 state RELATED,ESTABLISHED ACCEPT all -- 192.168.122.0/24 anywhere ACCEPT all -- anywhere anywhere REJECT all -- anywhere anywhere reject-with icmp-port-unreachable REJECT all -- anywhere anywhere reject-with icmp-port-unreachable Chain OUTPUT (policy ACCEPT) target prot opt source destination The /var/log/libvirt/qemu/virtualmachine1.log on physicalServer2: 2011-05-06 13:37:30.708: starting up LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/sbin:/sbin:/bin QEMU_AUDIO_DRV=none /usr/bin/kvm -S -M pc-0.14 -enable-kvm -m 2048 -smp 1,sockets=1,cores=1,threads=1 -name openjudge-test -uuid a8c704bc-a4f9-90db-3e57-40e60b00aac1 -nodefconfig -nodefaults -chardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/virtualmachine1.monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=readline -rtc base=utc -boot c -drive file=/media/nfs/virtualmachine1.img,if=none,id=drive-ide0-0-0,format=raw -device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 -drive if=none,media=cdrom,id=drive-ide0-1-0,readonly=on,format=raw -device ide-drive,bus=ide.1,unit=0,drive=drive-ide0-1-0,id=ide0-1-0 -netdev tap,fd=20,id=hostnet0 -device rtl8139,netdev=hostnet0,id=net0,mac=00:16:36:8a:22 :a0,bus=pci.0,addr=0x3 -chardev pty,id=charserial0 -device isa-serial,chardev=charserial0,id=serial0 -usb -vnc 127.0.0.1:2 -vga cirrus -incoming tcp:0.0.0.0:49163 -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x4 char device redirected to /dev/pts/0 2011-05-06 13:37:30.915: shutting down The /var/log/libvirt/qemu/virtualmachine1.log on physicalServer1 is empty. Both physical servers are using Ubuntu 11.04. The libvirt and kvm used are installed by apt-get. The libvirt version is 0.8.8.

  Read the article

• ClearType setting ignored in Windows Virtual PC with Windows XP Pro

  - by Yadyn

  I have a VM set up through Windows Virtual PC for Windows XP Pro and I have been completely unable to get ClearType to work. I have turned it on in the Display - Appearance - Effects dialog but it seems like it completely ignores this. All text is still without any anti-aliasing. Even setting it to normal smoothing doesn't work. If I disable Integration Features, it seems to work, but then I lose a lot of nice features. What's weirder, is that the Windows XP Mode installed with Windows Virtual PC (this is separate from my XP Pro VM) works with both ClearType and Integration Features just fine. I turned it on the same way and it works like a charm, no problems. I'm running Windows 7 Professional 64-bit as the host OS and have the latest (to my knowledge) Windows Virtual PC installed. The only funny business I can think of is that I've enabled 24-bit color via the Group Policy setting inside each XP virtual machine (both Pro and the stripped down XP mode copy). This is a fairly well-known trick documented all over the web, but here's a typical post about it.

  Read the article

< Previous Page | 449 450 451 452 453 454 455 456 457 458 459 460  | Next Page >