Search Results

Search found 25908 results on 1037 pages for 'configuration management'.

Page 457/1037 | < Previous Page | 453 454 455 456 457 458 459 460 461 462 463 464  | Next Page >

• LSI MegaRAID Expected Chip Temperature?

  - by Myles Gray

  We recently built a replicating SAN array from 2x Dell R720XD's, we are using LSI 9270-8i MegaRAID cards with CacheCade 2.0, BBU and Write Back cache enabled. Our cards are showing HUGE chip temperatures (97*C+ with NO disk activity!). Our R720's are in auto temp management mode so the max exhaust temp is 50*C. The MegaRAID cards are passively cooled and depend on good airflow to cool them - however is 97*C normal? - I have seen reference to 60*C max ambients but nothing for chip temp.

  Read the article

• How can I get Snow Leopard to recognize my third partition?

  - by qntmfred

  I installed Snow Leopard on my Macbook Pro. I then installed Windows 7 in a Boot Camp partition. Then using Windows 7's disk management console, I resized my Windows 7partition and created a 3rd NTFS partition for data, intending for both Windows 7 and Snow Leopard to read/write this partition. I installed MacFuse and NTFS-3G in Snow Leopard, but Snow Leopard still shows I have a single Windows 7 partition. How can I get Snow Leopard to recognize my third partition?

  Read the article

• Booting the server redis no errors

  - by Tylër

  The redis but usually begins with the following errors: tyler @ tyler-vortex: ~ / pens $. / src / redis-server [3690] Dec 01 10:56:05 # Warning: the specified config file, using the default config. In order to Specify a config file use 'redis-server / path / to / redis.conf' [3690] Dec 01 10:56:05 # Unable to set the max number of files limit to 10032 (Operation not permitted), setting the max configuration to 992 clients. Others errors founds: tyler@tyler-vortex:~/redis$ sudo ./utils/install_server.sh Welcome to the redis service installer This script will help you easily set up a running redis server Please select the redis port for this instance: [6379] Selecting default: 6379 Please select the redis config file name [/etc/redis/6379.conf] Selected default - /etc/redis/6379.conf Please select the redis log file name [/var/log/redis_6379.log] Selected default - /var/log/redis_6379.log Please select the data directory for this instance [/var/lib/redis/6379] Selected default - /var/lib/redis/6379 Please select the redis executable path [/usr/local/bin/redis-server] cat: ./redis.conf.tpl: Arquivo ou diretório não encontrado cat: ./redis_init_script.tpl: Arquivo ou diretório não encontrado ERROR: Could not write init script to /tmp/6379.conf. Aborting! Furthermore, I would like to know how to configure it not to consume so much RAM. Follow the memory configuration of our website, but the settings of "vm-*" does not exist in the file redis.conf. http://redis.io/topics/virtual-memory You have to create them? * Edit: I installed. After that, I believe that I no longer have access via. / Src / redis-server, because it happens: tyler@tyler-vortex:~$ cd redis/ tyler@tyler-vortex:~/redis$ ./src/redis-server [2616] 01 Dec 22:29:30 # Warning: no config file specified, using the default config. In order to specify a config file use 'redis-server /path/to/redis.conf' [2616] 01 Dec 22:29:30 # Opening port 6379: bind: Address already in use tyler@tyler-vortex:~/redis$ But there's another detail, the redistribution starts with the system .. redis 127.0.0.1:6379> exit tyler@tyler-vortex:~/redis$ ./src/redis-cli redis 127.0.0.1:6379> exit ... but how can I now see that the communication had before you installed from. sh?

  Read the article

• Problem: Munin Graph

  - by Pablo

  I've been trying to install Munin for 15 days, I looked for information, analized logs, I even deleted and reinstalled Munin using YUM. I'm hosted at Media Temple on a VPS with CentOS. The problem is still there and It's driving me nuts. Graphics are shown as following: http://imageshack.us/photo/my-images/833/capturadepantalla201106u.png/ This is the configuration of my munin.conf file dbdir /var/lib/munin htmldir /var/www/munin logdir /var/log/munin rundir /var/run/munin [localhost] address **.**.***.*** #IP VPS This is the configuration of my munin-node.conf file log_level 4 log_file /var/log/munin/munin-node.log port 4949 pid_file /var/run/munin/munin-node.pid background 1 setseid 1 # Which port to bind to; host * user root group root setsid yes # Regexps for files to ignore ignore_file ~$ ignore_file \.bak$ ignore_file %$ ignore_file \.dpkg-(tmp|new|old|dist)$ ignore_file \.rpm(save|new)$ allow ^127\.0\.0\.1$ Thanks so much, I appreciate all the answers UPDATE munin-graph.log Jun 22 16:30:02 - Starting munin-graph Jun 22 16:30:02 - Processing domain: localhost Jun 22 16:30:02 - Graphed service : open_inodes (0.14 sec * 4) Jun 22 16:30:02 - Graphed service : sendmail_mailtraffic (0.10 sec * 4) Jun 22 16:30:02 - Graphed service : apache_processes (0.12 sec * 4) Jun 22 16:30:02 - Graphed service : entropy (0.10 sec * 4) Jun 22 16:30:02 - Graphed service : sendmail_mailstats (0.14 sec * 4) Jun 22 16:30:02 - Graphed service : processes (0.14 sec * 4) Jun 22 16:30:03 - Graphed service : apache_accesses (0.27 sec * 4) Jun 22 16:30:03 - Graphed service : apache_volume (0.15 sec * 4) Jun 22 16:30:03 - Graphed service : df (0.21 sec * 4) Jun 22 16:30:03 - Graphed service : netstat (0.19 sec * 4) Jun 22 16:30:03 - Graphed service : interrupts (0.14 sec * 4) Jun 22 16:30:03 - Graphed service : swap (0.14 sec * 4) Jun 22 16:30:04 - Graphed service : load (0.11 sec * 4) Jun 22 16:30:04 - Graphed service : sendmail_mailqueue (0.13 sec * 4) Jun 22 16:30:04 - Graphed service : cpu (0.21 sec * 4) Jun 22 16:30:04 - Graphed service : df_inode (0.16 sec * 4) Jun 22 16:30:04 - Graphed service : open_files (0.16 sec * 4) Jun 22 16:30:04 - Graphed service : forks (0.13 sec * 4) Jun 22 16:30:05 - Graphed service : memory (0.26 sec * 4) Jun 22 16:30:05 - Graphed service : nfs_client (0.36 sec * 4) Jun 22 16:30:05 - Graphed service : vmstat (0.10 sec * 4) Jun 22 16:30:05 - Processed node: localhost (3.45 sec) Jun 22 16:30:05 - Processed domain: localhost (3.45 sec) Jun 22 16:30:05 - Munin-graph finished (3.46 sec)

  Read the article

• Jenkins: Use it with SSL / https

  - by Tim

  I have a Fedora server running Jenkins which I install via yum. Everything is okay, I can access it with http://ci.mydomain.com. But now, I want to access it with https://ci.mydomain.com, so the login with username and password is encrypted. How can I do this? Best Regards Tim Update My /etc/sysconfig/jenkins file. Starting Jenkins works, but I can not access Jenkins with the webbrowser with https://ci.mydomain.com or http://ci.mydomain.com:443, ... ## Path: Development/Jenkins ## Description: Configuration for the Jenkins continuous build server ## Type: string ## Default: "/var/lib/jenkins" ## ServiceRestart: jenkins # # Directory where Jenkins store its configuration and working # files (checkouts, build reports, artifacts, ...). # JENKINS_HOME="/var/lib/jenkins" ## Type: string ## Default: "" ## ServiceRestart: jenkins # # Java executable to run Jenkins # When left empty, we'll try to find the suitable Java. # JENKINS_JAVA_CMD="" ## Type: string ## Default: "jenkins" ## ServiceRestart: jenkins # # Unix user account that runs the Jenkins daemon # Be careful when you change this, as you need to update # permissions of $JENKINS_HOME and /var/log/jenkins. # JENKINS_USER="jenkins" ## Type: string ## Default: "-Djava.awt.headless=true" ## ServiceRestart: jenkins # # Options to pass to java when running Jenkins. # JENKINS_JAVA_OPTIONS="-Djava.awt.headless=true" ## Type: integer(0:65535) ## Default: 8080 ## ServiceRestart: jenkins # # Port Jenkins is listening on. # JENKINS_PORT="8080" ## Type: integer(1:9) ## Default: 5 ## ServiceRestart: jenkins # # Debug level for logs -- the higher the value, the more verbose. # 5 is INFO. # JENKINS_DEBUG_LEVEL="5" ## Type: yesno ## Default: no ## ServiceRestart: jenkins # # Whether to enable access logging or not. # JENKINS_ENABLE_ACCESS_LOG="no" ## Type: integer ## Default: 100 ## ServiceRestart: jenkins # # Maximum number of HTTP worker threads. # JENKINS_HANDLER_MAX="100" ## Type: integer ## Default: 20 ## ServiceRestart: jenkins # # Maximum number of idle HTTP worker threads. # JENKINS_HANDLER_IDLE="20" ## Type: string ## Default: "" ## ServiceRestart: jenkins # # Pass arbitrary arguments to Jenkins. # Full option list: java -jar jenkins.war --help # JENKINS_ARGS="--httpsPort=443 --httpsKeyStore=/root/.keystore --httpsKeyStorePassword=MYPASSWORD"

  Read the article

• How to manage Media Center Extender schedule from Media Center in Windows7

  - by Pangea

  I want to have several machines set up as digital signage displays and pull media (.pptx, video, images etc) from a centralized place. This is easy enough, but what I really need help doing is managing which extenders play specific media and the schedule from a Windows 7 x64 client hopefully within Media Center but I'm open to another management app. Is it possible to dictate the time and location each media is pushed to? I can use either a full machine running a full Win7 OS or a simple MC extender.

  Read the article

• So you're a new sysadmin...

  - by 80bower

  I've recently taken over management of a Windows 2003 Small Business server and network for a small, less than ten person company. I have some (antiquated) sysadmin experience, but I've little experience with Exchange. The documentation of the existing infrastructure leaves much to be desired, and I was wondering if there's any sort of "So you've just become sysadmin" guides that anyone could recommend.

  Read the article

• How to create a linked server advantage database in Sql server 2005

  - by Garcia Julien

  Hi, I've a advantage database server 8.1 and i would like to put it into Sql Server 2005 as linked server? Is it possible? I've already installed the OLEDB Driver from Advantage website, but i can't view it into sql server 2005 management studio. I've verified if it was in the register and it is within. So, can you help me ? Thank you Julien

  Read the article

• Reverse ssh tunneling with Tomato

  - by Deivuh

  Since my ISP restricts some incoming connections, I can't access remotely to my home pc. What I'm trying to do is make a reverse ssh connection from my home's router with Tomato firmware to the office computer, so I can access remotely from the office with that open connection. What I'm doing is running the following from the router: ssh -R 12345:localhost:22 oUser@office Then I leave run top open to keep the connection alive. And from my office what I do is run the following: ssh hUser@localhost -p 12345 but I get the following message with verbose on: OpenSSH_5.5p1 Debian-6, OpenSSL 0.9.8o 01 Jun 2010 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to localhost [::1] port 19999. debug1: Connection established. debug1: identity file /home/oUser/.ssh/id_rsa type -1 debug1: identity file /home/oUer/.ssh/id_rsa-cert type -1 debug1: identity file /home/oUser/.ssh/id_dsa type 2 debug1: Checking blacklist file /usr/share/ssh/blacklist.DSA-1024 debug1: Checking blacklist file /etc/ssh/blacklist.DSA-1024 debug1: identity file /home/oUser/.ssh/id_dsa-cert type -1 ssh_exchange_identification: Connection closed by remote host I've password remote access enabled in Tomato's configuration, so I should be able to access without having the public key on *authorized_keys*, but I've even tried adding it and still the same. I've done the same with my home's computer, and it does work perfectly, but it doesn't with the router. Am I doing something wrong? Thanks in advance.

  Read the article

• Attach radeon driver to specific PCI devices?

  - by genpfault

  I have two Radeon cards in this machine, a 6570 and a 6950: lspci | grep VGA: 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Turks [Radeon HD 6570] 02:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Cayman PRO [Radeon HD 6950] I'm trying to get VGA passthrough to work with KVM on Debian Wheezy, passing through the 6950 as a secondary video card to a Windows 7 guest. This works fine if I blacklist the radeon kernel module via /etc/modprobe.d/. If I remove the blacklist to run X11 (or even just a KMS console) on the 6570 the radeon module seems to attach to both cards: dmesg | egrep "01:00.0|02:00.0|radeon": pci 0000:01:00.0: [1002:6759] type 0 class 0x000300 pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref] pci 0000:01:00.0: reg 18: [mem 0xf7e20000-0xf7e3ffff 64bit] pci 0000:01:00.0: reg 20: [io 0xe000-0xe0ff] pci 0000:01:00.0: reg 30: [mem 0xf7e00000-0xf7e1ffff pref] pci 0000:01:00.0: supports D1 D2 pci 0000:02:00.0: [1002:6719] type 0 class 0x000300 pci 0000:02:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:02:00.0: reg 18: [mem 0xf7d20000-0xf7d3ffff 64bit] pci 0000:02:00.0: reg 20: [io 0xd000-0xd0ff] pci 0000:02:00.0: reg 30: [mem 0xf7d00000-0xf7d1ffff pref] pci 0000:02:00.0: supports D1 D2 vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=none,locks=none vgaarb: bridge control possible 0000:02:00.0 vgaarb: bridge control possible 0000:01:00.0 pci 0000:01:00.0: Boot video device [drm] radeon kernel modesetting enabled. radeon 0000:01:00.0: setting latency timer to 64 radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF [drm] radeon: 1024M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. radeon 0000:01:00.0: irq 46 for MSI/MSI-X radeon 0000:01:00.0: radeon: using MSI. [drm] radeon: irq initialized. radeon 0000:01:00.0: WB enabled [drm] radeon: ib pool ready. [drm] radeon: power management initialized fbcon: radeondrmfb (fb0) is primary device fb0: radeondrmfb frame buffer device [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0 radeon 0000:02:00.0: enabling device (0000 -> 0003) radeon 0000:02:00.0: setting latency timer to 64 radeon 0000:02:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used) radeon 0000:02:00.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF [drm] radeon: 2048M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. radeon 0000:02:00.0: irq 49 for MSI/MSI-X radeon 0000:02:00.0: radeon: using MSI. [drm] radeon: irq initialized. radeon 0000:02:00.0: WB enabled [drm] radeon: ib pool ready. [drm] radeon: power management initialized fb1: radeondrmfb frame buffer device [drm] Initialized radeon 2.12.0 20080528 for 0000:02:00.0 on minor 1 [drm] radeon: finishing device. radeon 0000:02:00.0: ffff88041a941800 unpin not necessary [drm] radeon: ttm finalized pci-stub 0000:02:00.0: claimed by stub pci-stub 0000:02:00.0: irq 49 for MSI/MSI-X This causes the Win7 VM to bluescreen on boot. How can I configure things so that the radeon module only attaches to the 6570 and not the 6950?

  Read the article

• apache2 VirtualHost in Mac OS X home directory

  - by aaron

  I am running Macports apache2 on Mac OS X 10.5. Whenever I configure a virtual host in the default folder, it works, however when I configure the virtual host in my home directory I get a "403 Forbidden" error. How do I configure a vhost in my home directory? Here is the configuration that yields "403 Forbidden" when I access "devel.mysite.com": /opt/local/apache2/conf/extra/httpd-vhosts.conf: DocumentRoot "/opt/local/apache2/htdocs" ServerName * #CustomLog "" common <VirtualHost *:80> #DocumentRoot "/opt/local/apache2/htdocs/mysite" DocumentRoot "/Users/myuser/Sites/mysite" ServerName devel.mysite.com </VirtualHost> The error message in /opt/local/apache2/logs/devel.mysite.com-error_log: [Sat Apr 17 19:54:49 2010] [error] [client 127.0.0.1] client denied by server configuration: /Users/myuser/Sites/mysite/ When I uncomment the line to make DocumentRoot in /opt/local/apache2/htdocs/mysite, it works: DocumentRoot "/opt/local/apache2/htdocs" ServerName * #CustomLog "" common <VirtualHost *:80> DocumentRoot "/opt/local/apache2/htdocs/mysite" #DocumentRoot "/Users/myuser/Sites" ServerName devel.mysite.com </VirtualHost> I get no errors or warnings when I start apache, and the only thing that is logged on startup is this (in /opt/local/apache/logs/error_log): [Sat Apr 17 19:56:29 2010] [notice] Digest: generating secret for digest authentication ... [Sat Apr 17 19:56:29 2010] [notice] Digest: done [Sat Apr 17 19:56:29 2010] [notice] Apache/2.2.14 (Unix) mod_ssl/2.2.14 OpenSSL/0.9.8m DAV/2 configured -- resuming normal operations A few notes: * The permissions of /Home/myuser/Sites/mysite is 755, owned by myuser, group is staff * Everything else works as expected, until I move the ServerRoot of the vhost to the directory in my home

  Read the article

• Bind9 configured to start at boot, has to be started manually

  - by antik

  I've configured bind9 on my system and it works great when it runs. It's currently configured to be run at runlevel 2 by setting: $ sudo update-rc.d bind9 enable 2 This appears to have done its work: $ tree -f /etc/rc?.d | grep -e ".*bind9$" |-- /etc/rc0.d/K85bind9 -> ../init.d/bind9 |-- /etc/rc2.d/S15bind9 -> ../init.d/bind9 |-- /etc/rc3.d/S15bind9 -> ../init.d/bind9 |-- /etc/rc4.d/S15bind9 -> ../init.d/bind9 |-- /etc/rc5.d/S15bind9 -> ../init.d/bind9 |-- /etc/rc6.d/K85bind9 -> ../init.d/bind9 Booting the system, I believe I am at runlevel 2: $ runlevel N 2 Given the above configuration, when the system is rebooted, bind does not come up. Only on occasion, for some reason, can I resolve hostnames immediately after startup. Far more often than not however, I cannot. I can interrogate the service's status: $ sudo /etc/init.d/bind9 status * could not access PID file for bind9 When the service doesn't start, I can start it successfully via a terminal by issuing $ sudo /etc/init.d/bind9 start And it works great from then on. Loopback configuration: $ ifconfig lo lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1872 errors:0 dropped:0 overruns:0 frame:0 TX packets:1872 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:220205 (220.2 KB) TX bytes:220205 (220.2 KB) Do I have my startup misconfigured? (I'm used to Gentoo so Ubuntu's model is still a little new to me) I'm not seeing any log indication of a failed attempt to start at boot in syslog. Is there someplace else I should be looking? What else should I look into to get bind working at startup?

  Read the article

• ICMP Redirect Theory VS. Application

  - by joeqwerty

  I'm trying to watch ICMP redirects in a lab using Cisco Packet Tracer (version 5.3.2) and I'm not seeing them, which leads me to believe that either my lab configuration isn't correct or my understanding of ICMP redirects isn't correct or that Packet Tracer doesn't support/use ICMP redirects. Here's what I believe to be true regarding ICMP redirects: Routers send ICMP redirects when all of these conditions are met: The interface on which the packet comes into the router is the same interface on which the packet gets routed out. The subnet or network of the source IP address is on the same subnet or network of the next-hop IP address of the routed packet. The datagram is not source-routed. The router kernel is configured to send redirects. I have the lab set up in Cisco Packet Tracer as displayed in the image and would expect to see an ICMP redirect from Router1 when pinging from PC1 to PC3. I'm not seeing the ICMP redirect and it looks like Router1 is actually routing all of the packets via Router2. I have IP ICMP debugging enabled on Router1 (and Router2) and I'm not seeing any ICMP redirect activity in either console. I'm also not seeing a route to the PC3 network in the routing table on PC1, which I think confirms that the ICMP redirect is not occurring. I'm using only static routing on Routers 1 and 2. Is my understanding of ICMP redirects incorrect, or is there a problem with my lab configuration or does Packet Tracer not support/use ICMP redirects?

  Read the article

• New Dell PE R710 - Storage Question

  - by rihatum

  Hi All, Dell PE R710, received from Dell in the following state : Windows Disk 0 1800GB ( Volume C & D ) Windows Disk 1 526 GB (Volume E ) Perc6i Integrated Raid Controller 6 x 500GB Nearline SAS 7200RPM HDDs Raid 5 Configuration with two Virtual Disks I have installed Dell open Manage and it shows the following : Virtual Disk 0 - State : Background Initialization ( 7% ) Virtual Disk 1 - State : Background Initialization ( 25% ) Now when I click on Virtual Disk 0 it shows me all 6 Disks and the same happens when I click on Virtual Disk 1 it displays all 6 disks. But when I click on Storage Perc6i Connector 0 I get 4 Physical disks with the following numbers : Physical Disk 0:0:0 Physical Disk 0:0:1 Physical Disk 0:0:2 Physical Disk 0:0:3 When I click on Storage Perc6i Connector 1 I get 2 Physical Disks Listed in the following way : Physical Disk 1:0:4 Physical Disk 1:0:5 I am a little confused in this description, does this 1:0:4 interprets to Controller1, Disk4. Does this integrated raid card have two controllers coming out of it ? Also, When I first switched on the machine, the boot partition was showing 1GB Available out of 40GB, now its showing 38GB available out of 40GB. Is this because the Virtual Disks are still Initializing ? Any recommendations or suggestions ? Also, this server have 6 x 500GB NearLine SAS Hard drives, what would be a good raid config ? We are planning to use it for Hyper-V with quite a few (7 or 8) virtual servers, your suggestions would be helpful. Also, while the virtual disks are in a initialization state, can I destroy and re-create the raid configuration ? I would have to do it at the BIOS CTRL-M ? Thanks and Regards

  Read the article

• A network-related or instance-specific error occurred while establishing a connection to SQL Server

  - by sf

  Hi, I'm getting the following error when trying to load an Asp.NET MVC App on IIS 7 with Sql Server 2008 Express. The App uses Linq to SQL. A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) I've done some searching and all answers point to enabling TCP connections in Sql Server Configuration which I have done to no avail. The connection string I am using is: Server=SERVERNAME\SQLEXPRESS;Database=DBName;Integrated Security=true The catch. I have another app that already could talk to the Sql Server just fine. Even before playing around with the Sql Server Configuration Settings. The other app uses the following connectionstring: Data Source=SERVERNAME\SQLEXPRESS;Initial Catalog=OtherDbName;Integrated Security=True;Persist Security Info=False;Connect Timeout=120 I've tried this connectionstring on the app that isn't working and it still doesn't work. Please help. I think i'm about to go crazy

  Read the article

• How to connect SAN from CentOS through two iSCSI Targets

  - by garconcn

  I had asked the similar question before. This time I want to use subnet for two iSCSI Targets, hence I start a new question. I have an old Promise VTrak M500i SAN Server. It comes with 2 iSCSI ports. I want to connect to two LUNs on the SAN server through two separate Targets from CentOS 5.7 64bits server. My network setup is as follows: CentOS server: Management network - 192.168.1.1 Storage network 1 - 192.168.5.2 Storage network 2 - 192.168.6.2 Promise SAN server: Management network - 192.168.1.2 iSCSI Port 1 - 192.168.5.1 iSCSI Port 2 - 192.168.6.1 I have two Logical Drives on this SAN and they are mapped as follows: Index Initiator Name LUN Mapping 0 iqn.2011-11:backup (LD0,0) 1 iqn.2011-11:template (LD1,1) Basically, I want the traffic to iqn.2011-11:backup LUN 0 through 192.168.5.1 network the traffic to iqn.2011-11:template LUN 1 through 192.168.6.1 network I don't use MPIO, just want to separate the traffic to avoid traffic jam. How do I achieve this? I am new to SAN stuff, please explain as much detail as you can. Thank you. The following are what I am doing now. After mapping the LUN to my pre-defined Initiators, the CentOS server can discover both Targets. [root@centos ~]# iscsiadm -m discovery -t sendtargets -p 192.168.5.1 192.168.5.1:3260,1 iscsi-1 192.168.6.1:3260,2 iscsi-1 [root@centos ~]# iscsiadm -m discovery -t sendtargets -p 192.168.6.1 192.168.6.1:3260,2 iscsi-1 192.168.5.1:3260,1 iscsi-1 [root@centos ~]# /etc/init.d/iscsi start iscsid is stopped Starting iSCSI daemon: [ OK ] [ OK ] Setting up iSCSI targets: Logging in to [iface: default, target: iscsi-1, portal: 192.168.6.1,3260] Logging in to [iface: default, target: iscsi-1, portal: 192.168.5.1,3260] Login to [iface: default, target: iscsi-1, portal: 192.168.6.1,3260] successful. Login to [iface: default, target: iscsi-1, portal: 192.168.5.1,3260] successful. [ OK ] [root@centos ~]# iscsiadm -m session tcp: [1] 192.168.6.1:3260,2 iscsi-1 tcp: [2] 192.168.5.1:3260,1 iscsi-1 When I check the LUN mapping on the SAN server for the two Logical Drives, both LUNs are connected through Port0-192.168.5.2 with the Initiator defined in CentOS. Assigned Initiator List: Initiator Name Alias IP Address LUN iqn.2011-11.centos centos.mydomain.com Port0-192.168.5.2 0 Initiator Name Alias IP Address LUN iqn.2011-11.centos centos.mydomain.com Port1-192.168.5.2 1 I assume the following is what I want: Initiator Name Alias IP Address LUN iqn.2011-11.backup centos.mydomain.com Port0-192.168.5.2 0 Initiator Name Alias IP Address LUN iqn.2011-11.template centos.mydomain.com Port0-192.168.6.2 1

  Read the article

• Ubuntu/Windows suddenly freezes

  - by tapan

  I've a strange problem with my ubuntu 10.04 installation. Whenever i boot into ubuntu the entire system freezes / hangs soon after (~ 2 mins in). This problem exists on my windows 7 installation too. However if i start World of Warcraft or Warcraft on windows it doesnt hang for the duration i'm playing the game. After i stop playing and exit the game my laptop hangs inside 2 mins. Here is when it gets weirder. If i disconnect the charger, the laptop doesn't hang. However when I start it in ubuntu recovery mode and drop to root shell and use the 'startx' command everything works perfectly. I cannot figure out what the problem is. i have an intel core2duo 2.2ghz processor, intel mobile 965 graphics, 2 GB RAM for more details here is the output of cat /proc/cpuinfo : processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping : 11 cpu MHz : 2201.000 cache size : 4096 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm ida tpr_shadow vnmi flexpriority bogomips : 4389.80 clflush size : 64 power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping : 11 cpu MHz : 2201.000 cache size : 4096 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm ida tpr_shadow vnmi flexpriority bogomips : 4388.96 clflush size : 64 power management: here is the output of cat /proc/meminfo MemTotal: 2052440 kB MemFree: 55924 kB Buffers: 579352 kB Cached: 821752 kB SwapCached: 704 kB Active: 897124 kB Inactive: 1032256 kB Active(anon): 412140 kB Inactive(anon): 264804 kB Active(file): 484984 kB Inactive(file): 767452 kB Unevictable: 0 kB Mlocked: 0 kB HighTotal: 1178440 kB HighFree: 6012 kB LowTotal: 874000 kB LowFree: 49912 kB SwapTotal: 995988 kB SwapFree: 986616 kB Dirty: 8928 kB Writeback: 0 kB AnonPages: 527596 kB Mapped: 76536 kB Slab: 39480 kB SReclaimable: 21100 kB SUnreclaim: 18380 kB PageTables: 5672 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 2022208 kB Committed_AS: 1856400 kB VmallocTotal: 122880 kB VmallocUsed: 11928 kB VmallocChunk: 104644 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 4096 kB DirectMap4k: 16376 kB DirectMap4M: 892928 kB Also the kern.log doesn't show any errors. What I want to know is what might be the problem, how i could test for it and if there are any solutions I could try. Thanks :).

  Read the article

• Magic Mouse and Alum keyboard autosleep?

  - by Moshe

  How does the power management of the wireless keyboard and magic mouse work with iMac? (late 2009) Do I need to manually power off the keyboard and mouse when I shut off my Mac or do they power off/sleep automatically? ( BONUS: How often should the batteries be replaced? )

  Read the article

• Experiences with BIRD for BGP?

  - by Shtééf

  We're currently using Quagga with Debian Linux to run a full table BGP router. The set-up has been dead simple up to now, but we've come to a point where I have to reconfigure the router quite a bit, and want to tighten things up. I've never really understood Quagga, and always found its documentation to be lacking. It appears to be mimicking Cisco, of which I only have basic understanding. BIRD has caught my eye recently. The couple of articles / presentations I found promote it as lightweight and more responsive under stress compared to Quagga. And it actually seems to have very decent documentation. So I'd like to know: Who's running BIRD right now, and in what kind of set-up? How is it stability-wise? I've read about it running in a couple of sites in production. Let's say I don't care at all for a Cisco-feel to configuration. How is configuration, maintainance, monitoring, etc. of BIRD in general? And any other notable experiences you may have with it.

  Read the article

• Ubuntu: package installed, but files missing?

  - by jeckyll2hide

  I have been playing around with the /etc/asterisk directory, installing the related pacakge (asterisk-config), removing it, removing the directory manually (just playing around to get the configuration synced to my configuration repo). Now I just want to reinstall the official package, so I do: root@tethys:/etc# apt-get install asterisk-config root@tethys:/etc# tree asterisk/ asterisk/ +-- manager.d What?! Empty?!? Have I installed it? root@tethys:/etc# dpkg --get-selections | grep asterisk asterisk install asterisk-config install asterisk-core-sounds-en install asterisk-core-sounds-en-gsm install asterisk-modules install asterisk-moh-opsound-gsm install asterisk-voicemail install Indeed! Let me check the contents of the package: root@tethys:/etc# dpkg -L asterisk-config ... /etc /etc/asterisk /etc/asterisk/res_snmp.conf /etc/asterisk/dbsep.conf /etc/asterisk/cel_custom.conf /etc/asterisk/cel.conf /etc/asterisk/meetme.conf /etc/asterisk/jingle.conf /etc/asterisk/queuerules.conf ... So, what have I done that the package will get installed, but the contents are nowhere to be seen? And, more importantly, how can I force the contents to be installed, no matter what I have done before?

  Read the article

• Nginx + uWSGI on a fresh Ubuntu install - bind error port 80

  - by knuckfubuck

  I know this is a common problem usually having to do with apache or another service already running on port 80 and I have done a lot of searching and running netstat and still have not figured out why I am getting this error. I rebuilt my slice, did a fresh install of Ubuntu 10.04 and setup nginx + uwsgi. It worked and I was able to see my Django site. I then installed Postgres8.4 and the rest of the stack needed for Geodjango from this link. After that was done I tried to restart nginx and I get this error: sudo /etc/init.d/nginx start Starting nginx: the configuration file /usr/local/nginx/conf/nginx.conf syntax is ok configuration file /usr/local/nginx/conf/nginx.conf test is successful [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use) [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use) [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use) [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use) [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use) [emerg]: still could not bind() I have nginx set to listen 80. Here's an output from netstat -l --numeric-ports | grep 80: tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:8000 0.0.0.0:* LISTEN Output from sudo lsof +M -i4: nginx 2330 root 8u IPv4 3195 0t0 TCP *:www (LISTEN) nginx 2331 www-data 8u IPv4 3195 0t0 TCP *:www (LISTEN) uwsgi 2335 s 4u IPv4 3259 0t0 TCP localhost:8000 (LISTEN) uwsgi 2352 s 4u IPv4 3259 0t0 TCP localhost:8000 (LISTEN) uwsgi 2353 s 4u IPv4 3259 0t0 TCP localhost:8000 (LISTEN) uwsgi 2354 s 4u IPv4 3259 0t0 TCP localhost:8000 (LISTEN) uwsgi 2355 s 4u IPv4 3259 0t0 TCP localhost:8000 (LISTEN) Anyone have any other ideas how I can figure out what is blocking port 80? edit Paste of my /etc/init.d/nginx script here: http://dpaste.com/hold/400937/

  Read the article

• Redmine subversion won't ignore certificate error even if told

  - by Pekka

  I have set up a copy of Redmine through the Bitnami Redmine Stack and am having trouble accessing a remote SVN repository through https. The trouble seems to be related to the fact that I don't have a signed certificate, and the certificate provided doesn't match the host name (I am accessing the same server through a number of host names). I am new to Ruby, Mongrel, Rails and Redmine. Following the advice in this forum thread, I changed the path Redmine uses to invoke the svn client in \apps\redmine\lib\ redmine\scm\adapters\subversion_adapter.rb from SVN_BIN = "svn" to SVN_BIN = "svn --trust-server-cert --non-interactive --config-dir c:/user/temp" I was hoping that the --trust-server-cert option would fix the certificate problem. However, I am still getting the following error message in mongrel.log: svn: OPTIONS of 'https://server.xyz:8443/svn/reponame': Server certificate verification failed: certificate issued for a different hostname, issuer is not trusted (https://server.xyz:8443) Does anybody know what to do about this? Additional info: I re-started the mongrel service after each change I am sure the configuration change has taken effect because subversion has created a full configuration directory in c:\user\temp I can access the remote repository using command line svn no problem The remote repository runs on a Windows box with VisualSVN

  Read the article

• What is the difference between safety and security?

  - by Lernkurve

  Question What is the difference between safety and security in the context of information management or computer science? Elaboration This could be the canonical answer for people searching for it. Let me know if superuser.com is the wrong site for this question. I have, of course, googled it and haven't found an answer that seemed short and to the point. Wikipedia wasn't very helpful either: safety, information security.

  Read the article

• Visualization Tools for Networks that Change with Time

  - by devin

  Does anyone known of any good Linux tools for visualizing networks that change (quickly) with time. I'm interested in things like: Routes between nodes Delays between nodes (especially as they change with time) Throughput I have root access to all the nodes (so I can run daemons on them all). Also, assume that I either have a management network that is stable or I will collect data and then analyze it offline.

  Read the article

• How to tunnel a local port onto a remote server

  - by Trevor Rudolph

  I have a domain that i bought from DynDNS. I pointed the domain at my ip adress so i can run servers. The problem I have is that I don't live near the server computer... Can I use an ssh tunnel? As I understand it, this will let me access to my servers. I want the remote computer to direct traffic from port 8080 over the ssh tunnel to the ssh client, being my laptop's port 80. Is this possible? EDIT: verbose output of tunnel macbookpro:~ trevor$ ssh -R *:8080:localhost:80 -N [email protected] -v OpenSSH_5.2p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Reading configuration data /Users/trevor/.ssh/config debug1: Reading configuration data /etc/ssh_config debug1: Connecting to site.com [remote ip address] port 22. debug1: Connection established. debug1: identity file /Users/trevor/.ssh/identity type -1 debug1: identity file /Users/trevor/.ssh/id_rsa type -1 debug1: identity file /Users/trevor/.ssh/id_dsa type 2 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.9p1 Debian-5ubuntu1 debug1: match: OpenSSH_5.9p1 Debian-5ubuntu1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.2 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'site.com' is known and matches the RSA host key. debug1: Found key in /Users/trevor/.ssh/known_hosts:9 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password debug1: Next authentication method: publickey debug1: Trying private key: /Users/trevor/.ssh/identity debug1: Trying private key: /Users/trevor/.ssh/id_rsa debug1: Offering public key: /Users/trevor/.ssh/id_dsa debug1: Authentications that can continue: publickey,password debug1: Next authentication method: password [email protected]'s password: debug1: Authentication succeeded (password). debug1: Remote connections from *:8080 forwarded to local address localhost:80 debug1: Requesting [email protected] debug1: Entering interactive session. debug1: remote forward success for: listen 8080, connect localhost:80 debug1: All remote forwarding requests processed

  Read the article

< Previous Page | 453 454 455 456 457 458 459 460 461 462 463 464  | Next Page >