Search Results

Search found 14657 results on 587 pages for 'solaris studio'.

Page 457/587 | < Previous Page | 453 454 455 456 457 458 459 460 461 462 463 464  | Next Page >

• Windows Setup could not configure Windows to run on this computer's hardware

  - by Hello71

  The whole installation goes smoothly up to the point of "Completing installation ...". The monitor changes resolution, after which a standard dialog box pops up saying Windows Setup could not configure Windows to run on this computer's hardware Then, in a few seconds, the whole machine powers down. Trying to restart produces the message: STOP: c000021a {Fatal System Error} 0x00000000 (0xc0000001 0x00100448) OR it boots into Setup and comes up with the message: Windows Setup encountered an unexpected error... (This is not the actual error, just paraphrasing) I tried using the OEM restore instead of a regular install, but it fails with the same error. (Even though it worked before...) General specs: HP Pavilion Elite e9262f Intel Core i5-750 Processor ATI Radeon HD 4650 Hitachi HDT721010SLA360 ATA Device 6GB DDR3 RAM SuperMulti DVD Burner with LightScribe Some built-in Wi-Fi module http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01916917 I've tried disconnecting the wireless card and disabling the built-in Ethernet and Firewire via the BIOS, and replacing the wireless keyboard and mouse with wired USB ones. Didn't work. I've also tried changing the SATA controller settings in the BIOS to RAID, AHCI, and IDE, reinstalling each time I changed. Still not working. I think the reason why it is showing the Fatal System Error is because it didn't finish installing before it errored out and shut down, so the system is left in an inconsistent state. I've tried 3 different copies (including the OEM restore) of Windows 7 now, and they're all failing at the same point, with the same error message. I've tried to install Windows 7 maybe 10 times already, with the exact same error message at the exact same location. Hm... Interestingly, the 32-bit version of Windows 7 works, but the 64-bit version doesn't. Perhaps it was a badly burned disk? Reburning the 64-bit version still comes up with the same error. Here's a picture of the side of the case that clearly says it came with Windows 7 64-bit, along with the model number and CPU. sudo fdisk -l: Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0009896f Device Boot Start End Blocks Id System /dev/sda1 * 1 13 104391 7 HPFS/NTFS /dev/sda2 14 94119 755906445 7 HPFS/NTFS /dev/sda3 119922 121602 13492224 7 HPFS/NTFS /dev/sda4 94120 119922 207257740+ 5 Extended /dev/sda5 119527 119922 3170769 82 Linux swap / Solaris /dev/sda6 107174 119526 99225441 83 Linux /dev/sda7 94120 107173 104856192 7 HPFS/NTFS Partition table entries are not in disk order

  Read the article

• Windows 7 has trouble installing software with Visual C++ 2005 & 2008

  - by John Fitzgerald

  I have been reinstalling windows 7 over and over again on an ASUS P5lD2 2Gb Ram 3Ghz P4 because it ultimately looses the contents of "Turn Windows Features On or Off" after I install software like Autocad 2010 & Microsoft Office 2007. I get install errors like 1935 and 1704 on the way tried different fixes at different times (install software in different order to try and isolate problem too). Ultimately I force the software to install after much buggering and end up loosing the contents of "TWFOOO" Should I be installing some older items like .net framework 1.1, 2.0 and visual studio items like vcredist_x86.exe? getting a bit lost because of compounded problems...

  Read the article

• Simulating an UNC path with a leading dot

  - by Uwe Keim

  Being a C# .NET Windows Forms developer, some customers are running our applications on an Apple OS X Mac inside a Parallels virtual machine. Parallels presents host folders to the guest Windows as UNC paths with a leading dot like \\.psf\Home\Some\More\Folders Now an application of us cannot handle the leading dot correctly when accessing files from these kind of shares ("Invalid URI, cannot analyze host name" exception). I want to debug and fix this issue, unfortunately I do have no Mac and Parallels around here to test it. My question is: Is there a way to "simulate" this kind of share on a normal Windows server or client so that I'll be able to debug my application with Visual Studio? What I tried so far: I already tried to edit my HOSTS file to contain an entry like # ... 127.0.0.1 .psf # ... but Windows just seems to not recognize the share at all.

  Read the article

• Run as different user on a shortcut

  - by PhilPursglove

  How do I do this in Windows 7? On Windows XP I had the ability to mark a shortcut as being run by a different user, so that every time I ran it it would prompt me for a username/password. This let me have two shortcuts for things like SQL Server Management Studio, one for my normal account and one for my Domain Admins account which has access to production servers. I can get to the 'Run as different user' option with Shift+right-click, but I can't see an option anywhere that would let me mark the shortcut as doing this every time.

  Read the article

• Share a USB sound card over a network/bluetooth (Mac & PC)

  - by AlexW

  I've been wondering how I can stream audio to an external Edirol USB sound card, wirelessly, on both Mac and PC. I'm not looking for high quality transmission, just to play mp3s from my Mac laptop to a USB sound card that is attached to two very nice balanced studio reference monitors. Is there any way I can firstly power the sound card box, and secondly, provide with an audio stream along it's USB input. I've looked at the Belkin USB hub, and I have a Time Capsule with the AirPort interface inside. These things seem to do vaguely what I want but when it comes to audio, the specifications are less clear. Any suggestions very welcome.

  Read the article

• Database hidden in SQL Server

  - by Colin Desmond

  During an aborted TFS import (2008 into 2010), I have managed to "lose" a database in 2008. The database is not visible in Management Studio, but the SQL Server exe has a handle on the .mdf file (according to UnLocker), it says it cannot attach it because the file is in use and it cannot attach a copy of the file (created when SQL Server was stopped), as it says a DB of the same name is already attached. Given I am using the same TFS admin account I have always used and have always been able to see the database in, why is this database missing and, more importantly, how do I get it back again?

  Read the article

• Dual-bootable Virtual Machine

  - by ojrac

  My work computer is a Linux desktop with a Windows 7 virtual machine for Visual Studio and IE testing. I'm very picky, and I don't want to configure two Windows installs... but I can't think of a way to do this without running afoul of Windows activation. I've already set up VirtualBox to run my VM off a physical hard drive, and grub isn't too hard to configure. But it'd be a waste of time without solving the activation problem. Is there any way I can boot into a single install of Windows as a virtual machine and on actual hardware without having to reactivate (until I'm eventually flagged as a pirate) every time I switch between the two? Is there any MS-endorsed way to use a single installed license with two sets of hardware?

  Read the article

• Could it be sane to use Windows Server 2012 as desktop

  - by nCdy

  what about using it on desktop? I've got enough strong PC with intel core i7 and 8GB Ram so what should I think about: why not? Were looking about major differences compared to windows 8, found less. for example new file system - can it affect me? In my usual day I need development instruments alike visual studio, virtualization tools, and some games So far I can't find something that must stop me, everything I need can work (seems like) there. Tell me why I must not do it or if that is sane to do.

  Read the article

• How do I restore a database on a remote SQL server 2005 from a local backup?

  - by MatsT

  I have been given access to (parts of) a remote SQL Server 2005 with SQL Server authentication in order to be able to make changes to a database without involving other people who is not working on the project. The database have been created on my local machine. Is there any way to restore the remote database from a backup file on my local computer? I do not currently have access to the filesystem on the remote server. EDIT: To clarify, the access I have is that i can log in to the server via the SQL Server Management Studio. I have one connection to my local database server and one connection to the remote server. What I basically want to do is copy the database from one connection to the other.

  Read the article

• How do I restore a database on a remote SQL server 2005 from a local backup?

  - by MatsT

  I have been given access to (parts of) a remote SQL Server 2005 with SQL Server authentication in order to be able to make changes to a database without involving other people who is not working on the project. The database have been created on my local machine. Is there any way to restore the remote database from a backup file on my local computer? I do not currently have access to the filesystem on the remote server. EDIT: To clarify, the access I have is that i can log in to the server via the SQL Server Management Studio. I have one connection to my local database server and one connection to the remote server. What I basically want to do is copy the database from one connection to the other.

  Read the article

• Coldfusion 8 Application Crashes Under Heavy Load

  - by KM01

  Hello, We have a CF8 app that runs for 20-25 minutes before crashing under heavy load ~ 1200 users. This load is generated by our load testing tool: 1200 users ramped up in 5 mins (approx behavior of our users), running for an hour. We have this app on Solaris 10, Apache 2, JRun 4 and Oracle 10g. Java version is 1.6. During the initial load tests, the thread dumps pointed to monitor deadlocks that pointed to sessions. "jrpp-173": waiting to lock monitor 0x019fdc60 (object 0x6b893530, a java.util.Hashtable), which is held by "scheduler-1" "scheduler-1": waiting to lock monitor 0x026c3ce0 (object 0x6abe2f20, a coldfusion.monitor.memory.SessionMemoryMonitor$TopMemoryUsedSessions), which is held by "jrpp-167" "jrpp-167": waiting to lock monitor 0x019fdc60 (object 0x6b893530, a java.util.Hashtable), which is held by "scheduler-1" We increased the number of sessions relative to the number of CPUs (48 simultaneous threads against 32 CPUs), and the deadlock went away. While varying the simultaneous threads helped a little bit in terms of response time, the CF server still tanked in 20-25 minutes during all of these tests. We ran more thread dumps, and saw a thread locking a monitor, for e.g.: "jrpp-475" prio=3 tid=0x02230800 nid=0x2c5 runnable [0x4397d000] java.lang.Thread.State: RUNNABLE at java.util.HashMap.getEntry(HashMap.java:347) at java.util.HashMap.containsKey(HashMap.java:335) at java.util.HashSet.contains(HashSet.java:184) at coldfusion.monitor.memory.MemoryTracker.onAddObject(MemoryTracker.java:124) at coldfusion.monitor.memory.MemoryTrackerProxy.onReplaceValue(MemoryTrackerProxy.java:598) at coldfusion.monitor.memory.MemoryTrackerProxy.onPut(MemoryTrackerProxy.java:510) at coldfusion.util.CaseInsensitiveMap.put(CaseInsensitiveMap.java:250) at coldfusion.util.FastHashtable.put(FastHashtable.java:43) - locked <0x6f7e1a78> (a coldfusion.runtime.Struct) at coldfusion.runtime.CfJspPage._arrayset(CfJspPage.java:1027) at coldfusion.runtime.CfJspPage._arraySetAt(CfJspPage.java:2117) at cfvalidation2ecfc1052964961$funcSETUSERAUDITDATA.runFunction(/app/docs/apply/cfcs/validation.cfc:377) As you see in the last line above there were several references CFMs and CFCs, and the lines have "cflock" tags, which were scoped to the "application." We (the dev team) then changed them to be scoped to a "name". After more load tests, there is no locking going on and there no deadlocks, but now the application tanks in 7-10 minutes. We've gotten system, network and DB reports from the respective admins, and they are not being taxed; even watched the server stats with server monitor, top, prstat, ran sar reports, etc. So we believe it is an issue with the CF server or maybe the JVM. I am running out of ideas as to what else we can try. Disclaimer: I am not a CF developer or Admin. I am just running the load test, analyzing the reports, threads etc, and sharing the results with the dev and admin teams, and trying the next change, and so on. So far no dice. Has anyone run into something similar? How did you go about diagnosing and troubleshooting? All thoughts and pointers welcome. Thank you for your time! KM

  Read the article

• What could explain my partitions disappearing on a new SSD with Windows 7?

  - by charlesrandall

  So this morning, I had a fresh install of Windows 7 pro, on a new SSD (Patriot TorqX 128gb), which I just put in to a new Dell Studio XPS 9000. Everything was fine. I booted to windows, no problem. I go to work. 8 hours later, I come home, and I'm greeted by my boot screen complaining about no bootable devices. Windows repair from the Windows 7 pro disk says it can't fix the problem. It doesn't see any windows installs. I boot up GParted, and my SSD is completely unallocated. No space used, no partitions. Perhaps this is related to allowing windows 7 to create a utility partition when I installed? Only thing I can think of. Is there some kind of known hardware issue that can result in an SSD completely wiping itself?

  Read the article

• In what way does non-"full n-key rollover" hinder fast typists?

  - by Michael Kjörling

  Wikipedia claims (although the latter claim does not cite a source) that: High-end keyboards that provide full n-key rollover typically do so via a PS/2 interface as the USB mode most often used by operating systems has a maximum of only six keys plus modifiers that can be pressed at the same time.[4] This hinders fast typists, ... In what way would the system being able to recognize only six non-modifier keys at once hinder a fast typist? I consider myself a relatively fast typist and I usually press one key, plus modifiers, at once; I can't imagine any real-life situation in which the system only recognizing six non-modifier keys being pressed at once has been a limiting factor in my keyboard usage. (Multi-stroke keyboard shortcuts as used by high-end software like Visual Studio, Emacs and the like are a different matter.) Note that I am not really interested in answers centered around multiplayer computer games; I'm looking for answers that give reasons that would be relevant to typists, somehow supporting the statement made on Wikipedia.

  Read the article

• virtual machines

  - by André Alçada Padez

  well, i hope this doesn't get categorized as a boating question, but it really is related to programming. I have windows XP, and i am going to have to have a VM running: Windows 7 Visual Studio 2008 Sql Server 2008 IIS 7 (8 in a little while) Wamp Photoshop CS5 etc... so i was wondering what should i use to be easier to install and configure, and best performance: Virtual Box or Microsoft's Virtual Machine? Thank you Well i tried Virtual Box, it's always crashing for some reason. I think i'm going to try Virtual PC, just to stick to an all Microsoft Solution.

  Read the article

• Linking to lua libraries w/ codeblocks on linux

  - by person

  After I downloaded the source for lua, I followed the install instructions, doing... make linux install make generic install I've also done the make test and it passes, printing out Hello World, from Lua 5.1. However, I can't link to the lua libraries in CodeBlocks. I know where lualib.a is (usr/local/lib) which I set in my Search Directories for the linker. I still get error messages like... undefined reference to lua_isstring Am I missing something critical here? P.S. I had this running on Windows via Visual Studio.

  Read the article

• How to get physical partition name from iSCSI details on Windows?

  - by Barry Kelly

  I've got a piece of software that needs the name of a partition in \Device\Harddisk2\Partition1 style, as shown e.g. in WinObj. I want to get this partition name from details of the iSCSI connection that underlies the partition. The trouble is that disk order is not fixed - depending on what devices are connected and initialized in what order, it can move around. So suppose I have the portal name (DNS of the iSCSI target), target IQN, etc. I'd like to somehow discover which volumes in the system relate to it, in an automated fashion. I can write some PowerShell WMI queries that get somewhat close to the desired info: PS> get-wmiobject -class Win32_DiskPartition NumberOfBlocks : 204800 BootPartition : True Name : Disk #0, Partition #0 PrimaryPartition : True Size : 104857600 Index : 0 ... From the Name here, I think I can fabricate the corresponding name by adding 1 to the partition number: \Device\Harddisk0\Partition1 - Partition0 appears to be a fake partition mapping to the whole disk. But the above doesn't have enough information to map to the underlying physical device, unless I take a guess based on exact size matching. I can get some info on SCSI devices, but it's not helpful in joining things up (iSCSI target is Nexenta/Solaris COMSTAR): PS> get-wmiobject -class Win32_SCSIControllerDevice __GENUS : 2 __CLASS : Win32_SCSIControllerDevice ... Antecedent : \\COBRA\root\cimv2:Win32_SCSIController.DeviceID="ROOT\\ISCSIPRT\\0000" Dependent : \\COBRA\root\cimv2:Win32_PnPEntity.DeviceID="SCSI\\DISK&VEN_NEXENTA&PROD_COMSTAR... Similarly, I can run queries like these: PS> get-wmiobject -namespace ROOT\WMI -class MSiSCSIInitiator_TargetClass PS> get-wmiobject -namespace ROOT\WMI -class MSiSCSIInitiator_PersistentDevices These guys return information relating to my iSCSI target name and the GUID volume name respectively (a volume name like \\?\Volume{guid-goes-here}), but the GUID volume name is no good to me, and there doesn't appear to be a reliable correspondence between the target name and the volume that I can join on. I simply can't find an easy way of getting from an IQN (e.g. iqn.1992-01.com.example:storage:diskarrays-sn-a8675309) to physical partitions mapped from that target. The way I do it by hand? I start Disk Management, and look for a partition of the correct size, verify that its driver says NEXENTA COMSTAR, and look at the disk number. But even this is unreliable if I have multiple iSCSI volumes of the exact same size. Any suggestions?

  Read the article

• SQL SERVER AGENT CAN NOT START

  - by Keith Ph?m

  http://imageshack.us/photo/my-images/819/sqlserveragent3.png/ http://imageshack.us/photo/my-images/341/sqlserveragent.png/ I still can not start SQL server agent . When Sql server agent just starts and stop immedietly .I don't know what's happening in the middle .. I already login by the Network Service account in configuration tools and assign member role in msmb database for SQL Server agent. Pls give me an advice I use win 7 ultimate , sql server 2008: Microsoft SQL Server Management Studio 10.0.1600.22 ((SQL_PreRelease).080709-1414 ) Microsoft Data Access Components (MDAC) 6.1.7600.16385 (win7_rtm.090713-1255) Microsoft MSXML 3.0 4.0 5.0 6.0 Microsoft Internet Explorer 9.0.8112.16421 Microsoft .NET Framework 2.0.50727.4971 Operating System 6.1.7600 Thanks

  Read the article

• Pressing an accent key (´ / ?) adds the character twice in most programs

  - by sh code

  This might seem as duplicate of Pressing key with accent character makes it enter twice but it is not: About three days ago, the issue started - I am using Slovak (Slovakia) keyboard, and the key for adding accents/diacritics (just left from backspace) acts strangely - it should "do nothing" upon pressing, and then when character key is pressed right after it, it should output that character with accent/diacritics. However, in most programs, pressing it once results in immediately outputting the accent itself twice (which under normal circumstances happens when you press the key twice). This issue doesn't happen in Visual Studio or any program I make in it, and Pidgin, it seems to happen everywhere else (firefox, notepad, MS OneNote, Windows Explorer itself). I am not aware of any software installations, driver changes or system updates between the time it worked properly and the time when it broke. What could be the problem and how do I solve it?

  Read the article

• Access is denied while moving a file from different volumes

  - by logeeks

  i have a portable 500GB HDD plugged into my dell xps system. The system have windows 7 professional edition. the problem is that when i try to open a file(visual studio .sln file) it is saying that access is denied. I cannot copy this file to a different location(within my local HDD) it is saying that i need permission for the task to complete. I've checked and confirmed the following things 1) I've logged into an admin account before attempting these operations 2) My admin account have 'Full Control' 3) I've full control over the portable HDD 4) I changed the 'UAC' settings to 'Never notify' Please help.

  Read the article

• How to fix poor rendering in Windows Movie Maker?

  - by Cyberherbalist

  I am using CamStudio to make some instructional videos about Visual Studio for our development team, and one of the videos needed some editing to remove audio and video mistakes and to add in a better ending. CamStudio outputs to .avi files, and they look pretty good, with the program source code being quite readable. However, after making the edits using WMM, it has rendered the results to a noticeable loss in quality. It has gone from from fairly sharp in focus and adequately readable to recognizable but somewhat blurred. It has also inflated the size of the new .avi file to three times its original size (before cropping half of the vido out!). And the .wmv I attempted to render was was certainly smaller but simply horrible-looking. The left image here is the original video, and the right image is WMM's rendering in .avi format: I have to be doing something wrong, but I know nothing about how to use WMM (my first use of it). I am using default settings to the best of my knowledge. Any suggestions welcomed!

  Read the article

• Which VMs are easier to install/configure and more performant?

  - by André Alçada Padez

  well, i hope this doesn't get categorized as a boating question, but it really is related to programming. I have windows XP, and i am going to have to have a VM running: Windows 7 Visual Studio 2008 Sql Server 2008 IIS 7 (8 in a little while) Wamp Photoshop CS5 etc... so i was wondering what should i use to be easier to install and configure, and best performance: Virtual Box or Microsoft's Virtual Machine? Thank you Well i tried Virtual Box, it's always crashing for some reason. I think i'm going to try Virtual PC, just to stick to an all Microsoft Solution.

  Read the article

• ASP.NET, PostgreSQL, Mono, Ubuntu, Apache: Good idea?

  - by wreck_of_u

  I am a long-time Microsoft .NET developer. ASP.NET/MSSQL/IIS has been my bread & butter over the past 6 years. Now, I'm getting fond of the "lightweightness" of Ubuntu 10.xx server. I'm also loving SSH-ing it from my Windows 7 PC and installing apps using the awesome "apt-get" command. I've also been using HeidiSQL with MySQL now and loving it. It feels like Management Studio. However, i've read that PostgreSQL "may" be better than MySQL, and I did experience some MySQL overloads in my Moodle box (but this can be just a poor tweaking in my part). My question is, would it be a good idea to run this configuration? ASP.NET 4.0 PostgreSQL (the latest one I can apt-get!) Ubuntu 10.10 with Mono running on Apache Also, I assume I would be using Npgsql for Mono as my connector from ASP.NET to PostgreSQL?

  Read the article

• Ubuntu 9.10 x64 has no sound, while Ubuntu 9.04 32 bit does.

  - by Macha

  I installed Ubuntu 9.10 x64 recently. Up until now I've been on 32 bit Ubuntu. For the first time since installing it, I went and tried to play a Youtube video. There was no sound. So a quick test to the system reveals that nothing will play sound (And I've tried turning the volume too full, as some have said output is quite quiet, but there is no sound at all). Further research shows that in sound preferences, the only output device listed was Dummy Output. Why would it work in 9.04 x86 and not 9.10 x64? While booting up, and occasionally with the sound preferences dialog open, I get a loud click (even though it isn't recognising my sound card). It's a Dell Studio 17 laptop. I'm not sure what the exact model of sound card is.

  Read the article

• Create Virtual Image of Laptop before Formatting

  - by Simon Mark Smith

  I have a 3 year old laptop running Windows XP that I used for business. Although I have not used the laptop in over a year, I now want to re-commission it with Windows 7 and a fresh install. Before I do the fresh install I want to create a Virtual Image of the laptop that I can keep and potentially run on my desktop machine should I ever need to access any of the old files/projects that it contains currently. I know that most people will say just copy the files over to your desktop, but my concern is the configuration of the laptop. I used to use it for development and it has older versions of Visual Studio, SQL Server, Active X controls etc, etc than I currently use so I really want to preserve the environment not just the files. So really I am asking what is the best tool-set/method to achieve this? I understand there are free VM tools available but I have never done this before and would appreciate any help.

  Read the article

• How to connect SharePoint Online with Dynamics CRM Online using BDC?

  - by ripperus

  I try to connect SharePoint Online with Dynamics CRM Online using BDC. But without any results. I'll try to using Account's from CRM in SharePoint Online like a list. I mean - when I have 100 account's (customers) in CRM I want to export this account's to SharePoint Online like a list. And when I will bed edited account in CRM the elements in the list will be update (and when I edited element on SharePoint list it will update in CRM). Is there any possibility to connect in this way? If if what I should use - SharePoint Designer 2010, Visual Studio or do this on web interface?

  Read the article

< Previous Page | 453 454 455 456 457 458 459 460 461 462 463 464  | Next Page >