Search Results

Search found 14598 results on 584 pages for 'address'.

Page 459/584 | < Previous Page | 455 456 457 458 459 460 461 462 463 464 465 466  | Next Page >

• VLAN support on Juniper EX - 2200 switches

  - by liv2hak

  I have 6 Juniper switches (EX - 2200) connected to each other as shown in the network topology below. I have two PC's that I am using PC1 - (used for configuring the 6 switches via minicom) PC2 - to monitor the traffic between the switches via the Ports that are marked with arrows in the diagram. STEP 1: I create a new vlan On Switch 3 (SW3) that includes Port 12 and Port 22. I also assign l3-interface to the vlan (vlan_2) with ip address - 192.168.1.7. Now I plug-in Port 0 of Switch 3 on PC2. Now I try pinging 192.168.1.7 from PC2 (192.168.1.10) I want to know what will happen? My postulation is that I will not be able to ping SW3 from PC2.This is because SW3 (Port 12 and Port 22) is a part of a vlan_2 and vlan_2 logically breaks up broadcast domains and so 192.168.1.7 will not be reachable from 192.168.1.10. Now I have an l3-interface on SW1 with IP 192.168.1.1 using default vlan( vlan-id 0). Similarly I have enabled IP on SW2 - 192.168.1.2 SW3 - 192.168.1.3 SW4 - 192.168.1.4 SW5 - 192.168.1.5 SW6 - 192.168.1.6 all using default vlan. Now I plug in Port 12 of SW3 (blue cable) into the PC2. I try to ping 192.168.1.1 from PC2. What will happen at this stage.? My postulation is that I will be able to ping switch 1.Is this correct? Also another question is that can a single port on a Switch be added multiple VLANS? I am a beginner at network configuration? Any help would be highly appreciated. (Please ignore the CISCO symbol on the switches in the diagram.All swithes are Junper EX 22-00.)

  Read the article

• Sending Adobe PDF attachments from Adobe Reader (in Outlook 2003) takes too long

  - by White Island

  I have a customer who is using Outlook 2003 (Microsoft Online Services) and Adobe reader 9+. When they send a PDF from Adobe reader to Outlook (via the Send as attachment to e-mail feature in Adobe), it freezes for 30 seconds to 5 minutes before the new e-mail pops up with the PDF attachment. I'm pretty sure the issue is on the Outlook side of things, as I've tried Adobe reader 8 and Foxit Reader with the same results (Windows XP/7 doesn't seem to make a difference, either). I tried Outlook in safe mode on the first (Win7) machine I was working on, and the e-mail attachment worked a lot faster, but when I tried to replicate the results on another machine, one wouldn't go into safe mode, the other didn't seem to show a difference. In an effort to fix the problem in Outlook normal mode, I tried disabling all add-ins, Com add-in (Office Communicator is the only one), reading pane, Word 2003 as e-mail editor... but none of these seemed to address the issue. Does anyone have any other ideas? I need to get this resolved as soon as possible, and it doesn't seem practical to make them run in safe mode. :P

  Read the article

• My computer loses network connectivity every 30 minutes

  - by Logan Garland

  My LAN connected PC loses network connectivity every 30 minutes. It has a static IP address and I've checked to make sure there aren't any IP conflicts on my network. If I'm streaming from that PC to my Xbox the stream will be interrupted and it normally takes about a minute to come back online. The same happens if I'm actually on the PC and just browsing the web. I'm looking for suggestions on how to track down this issue. I've tried checking the available logs on my router to see if there is an issue with DCHP but have been unsuccessful in finding any evidence. Any suggestions would be helpful. I can't think of any recent changes to my network, PC or software installations that may have caused this. I am a software developer and have intermediate networking knowledge. EDIT: During one outage I told windows to troubleshoot the network problem and it said that it could automatically fix the problem by changing DCHP info. It basically said my network adapter from static to automatically obtain. This did fix the issue quicker than just waiting it out, but the outage occurred again 30 minutes later even when leaving those settings.

  Read the article

• ASDIEdit Cleanup After Exchange 2003 Crash During Transition To Exchange 2010

  - by ThaKidd

  Hello all. I would value some input from a few experts. I have almost completed the transition from Exchange 2003 Standard to Exchange 2010 Standard. Everything went smoothly until I tried to uninstall Exchange 2003. At that point the server bit the dust and died completely. I now have NO access to the old Exchange System Management MMC as I am running Windows 2008 SR2 and Windows 7 only. I can only fix this with ASDIEdit, EMShell, and EMConsole. I have used the 2010 shell to move/remove/verify that all mailboxes, public folders and OAB are hosted on Exchange 2010. I also verified that the routing connector has been deleted. The only two things that were not done was to remove the Recipient Update Service and actually perform the removal of the 2003 software. I have spent a lot of time going through ASDIedit and have located the old Administrative Group and the Exchange 2003 server listed under it. I also located the Recipient Update Service which includes two entries; Enterprise and my domain name. I have read that it is an unwise idea to remove the old administrative group so I won't bother messing with that. I am repeatedly getting three warnings in the Application Log. Both are from MSExchangeTransport EventID 5006 (Cannot find route to Mailbox Server OLDSERVER) and 5020 (The topology doesn't contain a route to Exchange 2000 Server or Exchange Server 2003) So my questions are: To clean out AD of the old Exchange 2003 info, can I delete the server name folder (Configuration - Services - Microsoft Exchange - ExchOrg - Administrative Groups - First Administrative Group - Servers - Old Server) and also delete the Update Recipient Service (Enterprise) and Update Recipient Service (DOMAIN) containers safely? Are there any additional items I need to address to ensure the AD is clean? Thanks in advance for your help!

  Read the article

• Nginx dynamic upstream configuration / routing

  - by Dan Sosedoff

  I was experimenting with dynamic upstream configuration for nginx and cant find any good solution to implement upstream configuration from third-party source like redis or mysql. The idea behind it is to have a single file configuration in primary server and proxy requests to various app servers based on environment conditions. Think of dynamic deployments where you have X servers that are running Y workers on different ports. For instance, i create a new app and deploy. App manager selects a server and then rolls out a worker (Ruby/PHP/Python) and then reports the ip:port to the central database with status "up". At this time when i go to the given url nginx should proxy all requests to the specified ip:port upstream. The whole thing is pretty similar to what heroku does, except this proof-of-concept is not supposed to be production ready, mostly for internal needs. The easiest solution i found was using resolver with ruby-based DNS server. It works, nginx gets the IP address correctly, but the only problem is that you cant define port number for that IP. Second solution (which i havent tried yet) is to roll something else as a proxy server, maybe written in Erlang. In this case we need to use something to serve static content. Any ideas how to implement this in more flexible and stable way? P.S. Some research options: http://openresty.org/#DynamicRoutingBasedOnRedis https://github.com/nodejitsu/node-http-proxy

  Read the article

• Problems setting up a VPN: can connect but can't ping anyone

  - by Fernando

  This is my first time setting a VPN. Clients can connect but can't ping other machines. This is certainly a route problem but i can't find the right way to configure it. Here is a sample example of the two LANS i want to connect: So, i want machines from 192.168.1.0/24 being able to connect with 192.168.0.0/24 as if they were on the same network. For the VPN network, i would like to use the 10.0.0.0/24 range. Here is my server.conf: proto udp port 1194 dev tun server 10.0.0.0 255.255.255.0 push "route 192.168.0.0 255.255.255.0 192.168.0.1" push "dhcp-option DNS 192.168.0.1" push "dhcp-option WINS 192.168.0.1" comp-lzo keepalive 10 120 float max-clients 10 persist-key persist-tun log-append /var/log/openvpn.log verb 6 tls-server dh /etc/openvpn/keys/dh1024.pem ca /etc/openvpn/keys/ca.crt cert /etc/openvpn/keys/server.crt key /etc/openvpn/keys/server.key tls-auth /etc/openvpn/keys/mykey.key 0 status /var/log/openvpn.stats And one of my clients 192.168.1.2: client dev tap proto udp remote my.no-ip.address 1194 route 192.168.1.0 255.0.0.0 192.168.1.1 3 resolv-retry infinite nobind persist-key persist-tun ca "C:\\Program Files\\OpenVPN\\easy-rsa\\keys\\ca.crt" cert "C:\\Program Files\\OpenVPN\\easy-rsa\\keys\\test1.crt" key "C:\\Program Files\\OpenVPN\\easy-rsa\\keys\\test1.key" tls-auth "C:\\Program Files\\OpenVPN\\easy-rsa\\keys\\mykey.key" 1 ns-cert-type server cipher BF-CBC comp-lzo verb 1 What exactly i am doing wrong? All machines can connect to openvpn but the ping doesn't work. At the client log i see the following error: Wed Feb 16 09:43:23 2011 OpenVPN ROUTE: OpenVPN needs a gateway parameter for a --route option and no default was specified by either --route-gateway or --ifconfig options Wed Feb 16 09:43:23 2011 OpenVPN ROUTE: failed to parse/resolve route for host/network: 10.0.0.1 Thanks!

  Read the article

• Multiple contacts with shared information

  - by Keith Thompson

  Background: I currently have several hundred contacts, synchronized between a Microsoft Exchange server and several mobile devices. I also save exported copies of the contacts in .vcf format. Is there a good way (application, file format, whatever) to maintain contacts with shared information? A very common scenario is that I have contacts for two or more people who live in the same house, for example: John Doe 123 Main Street, Anytown USA Home: 555-555-1111 Work: 555-555-2222 Mobile: 555-555-3333 E-mail: [email protected] Jane Doe 123 Main Street, Anytown USA Home: 555-555-1111 Work: 555-555-4444 Mobile: 555-555-5555 E-mail: [email protected] As you can see, both contacts have the same home address and phone number, but distinct names and work and mobile phone numbers. (Other information might also be either shared or distinct.) The applications and file formats I'm familiar with don't seem to have a good way to deal with this. If I use a single "John & Jane Doe" contact for both, it's difficult to distinguish the distinct information (if I want to call Jane's mobile phone rather than John's). If I use a separate contact for each, I have to remember to update both of them (or all of them for N 2) when they move or change their home phone number. An ideal solution would let me create a record containing information for their household, and have each of their contact records contain a reference to the household record, so that when I view John's contact record I see both shared and distinct information. Is there anything out there that has good support this kind of thing? (I would think there would be, since it's a very common scenario.) (I suppose I could roll my own system that generates merged .vcf files from some extended format, but that wouldn't play well with synchronizing across multiple devices.)

  Read the article

• Sonicwall routing between multiple subnets on multiple interfaces

  - by Rain

  As shown by the network diagram below, I have two completely separate networks. One is being managed by a Sonicwall NSA 220, the other by some other router (the brand is not important). My goal is to allow devices within the 192.168.2.0/24 network to access devices in the 192.168.3.0/24 network. Allowing the reverse (192.168.3.0/24 - 192.168.2.0/24) is not required. So far, I have done the following: I connected the X3 Interface on the Sonicwall to the 192.168.3.0/24 network switch (shown as the dashed red line in the diagram). Next, I gave it a static ip address of 192.168.3.254 and set the Zone to LAN (the same Zone for the X0 interface). Judging by various articles and KBs I've read, this is all that should be necessary, although it does not work. I can ping 192.168.3.254 from any device in the 192.168.2.0/24 network although I cannot ping/connect to any device within the 192.168.3.0/24 network. Any help would be greatly appreciated! Network Diagram: (I asked a similar, yet more complicated, question earlier; although, I realized that I cannot solve that without first solving this (which may actually solve my original question))

  Read the article

• apache vhost not working consistently

  - by petrus

  I have a vhost on my webserver whose sole and unique goal is to return the client IP adress: petrus@bzn:~$ cat /home/vhosts/domain.org/index.php <?php echo $_SERVER['REMOTE_ADDR']; echo "\n" ?> This helps me troubleshoot networking issues, especially when NAT is involved. As such, I don't always have domain name resolution and this service needs to work even if queried by its IP address. I'm using it this way: petrus@hive:~$ echo "GET /" | nc 88.191.124.41 80 191.51.4.55 petrus@hive:~$ echo "GET /" | nc domain.org 80 191.51.4.55 router#more http://88.191.124.41/index.php 88.191.124.254 However I found that it wasn't working from at least a computer: petrus@seth:~$ echo "GET /" | nc domain.org 80 petrus@seth:~$ petrus@seth:~$ echo "GET /" | nc 88.191.124.41 80 petrus@seth:~$ What I checked: This is not related to ipv6: petrus@seth:~$ echo "GET /" | nc -4 ydct.org 80 petrus@seth:~$ petrus@hive:~$ echo "GET /" | nc ydct.org 80 2a01:e35:ee8c:180:21c:77ff:fe30:9e36 netcat version is the same (except platform, i386 vs x64): petrus@seth:~$ type nc nc est haché (/bin/nc) petrus@seth:~$ file /bin/nc /bin/nc: symbolic link to `/etc/alternatives/nc' petrus@seth:~$ ls -l /etc/alternatives/nc lrwxrwxrwx 1 root root 15 2010-06-26 14:01 /etc/alternatives/nc -> /bin/nc.openbsd petrus@hive:~$ type nc nc est haché (/bin/nc) petrus@hive:~$ file /bin/nc /bin/nc: symbolic link to `/etc/alternatives/nc' petrus@hive:~$ ls -l /etc/alternatives/nc lrwxrwxrwx 1 root root 15 2011-05-26 01:23 /etc/alternatives/nc -> /bin/nc.openbsd It works when used without the pipe: petrus@seth:~$ nc domain.org 80 GET / 2a01:e35:ee8c:180:221:85ff:fe96:e485 And the piping works at least with a test service (netcat listening on 1234/tcp and output to stdout) petrus@bzn:~$ nc -l -p 1234 GET / petrus@bzn:~$ petrus@seth:~$ echo "GET /" | nc domain.org 1234 petrus@seth:~$ I don't know if this issue is more related to netcat or Apache, but I'd appreciate any pointers to troubleshoot this issue ! The IP addresses have been modified but kept consistent for easy reading. bzn is the server, hive is a working client and seth is the client on which I have the issue.

  Read the article

• mysqladmin - Unknown MySQL server host

  - by ert

  I'm trying to connect to a mysql server over a local network. The server is running and listening to post 41322. dylan~$ netstat -ln | s mysql unix 2 [ ACC ] STREAM LISTENING 41322 /var/run/mysqld/mysqld.sock My user is granted all rights from all addresses, and I can log in locally. dylan~$ mysqladmin -P 41322 -h [email protected] create database test mysqladmin: connect to server at '[email protected]' failed error: 'Unknown MySQL server host '[email protected]' (1)' Check that mysqld is running on [email protected] and that the port is 41322. You can check this by doing 'telnet [email protected] 41322' Adding a --verbose flag gives no additional output. I've commented out bind-address=127.0.0.1 in /etc/mysql/my.cnf on the server. I can ssh into the server without a problem. dylan~$ ps a | grep mysql 11131 pts/3 S 0:00 /bin/sh /usr/bin/mysqld_safe 11170 pts/3 Sl 0:03 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --user=mysql --pid-file=/var/run/mysqld/mysqld.pid --skip-external-locking --port=3306 --socket=/var/run/mysqld/mysqld.sock 11171 pts/3 S 0:00 logger -p daemon.err -t mysqld_safe -i -t mysqld 13710 pts/1 S+ 0:00 grep mysq Any help or thoughts are appreciated.

  Read the article

• Destination host unreachable - Windows Server 2008

  - by Doug

  Hi There, I'm working with a windows 2008 domain controller, which I'm having issues connecting to internet resources. A small bit of background, this is a 2008 domain controller that has been added into an existing Win 2k domain, with a goal of replacing the older computers. Both of the older controllers can still access internet resources, and so can all the clients. When I ping Google.ca from the new server, it does resolve to an ip address, but then says "Reply from 192.168.123.20: Destination host unreachable." I'm really at a lost now, I've checked and rechecked my ip configuration, the default gateway is my router, the primary DNS server is the my DC, and the secondary DNS is also my router. The DNS server on the domain has a forwarder added for the router as well. Everything on my local network works just fine, all my internal resources can be resolved. For the time being, I've stopped the Firewall service. I'm not 100% used to Server 2008 yet, but it might be a case of just missing something simple. Thanks for your time.

  Read the article

• Destination host unreachable - Windows Server 2008

  - by Doug

  Hi There, I'm working with a windows 2008 domain controller, which I'm having issues connecting to internet resources. A small bit of background, this is a 2008 domain controller that has been added into an existing Win 2k domain, with a goal of replacing the older computers. Both of the older controllers can still access internet resources, and so can all the clients. When I ping Google.ca from the new server, it does resolve to an ip address, but then says "Reply from 192.168.123.20: Destination host unreachable." I'm really at a lost now, I've checked and rechecked my ip configuration, the default gateway is my router, the primary DNS server is the my DC, and the secondary DNS is also my router. The DNS server on the domain has a forwarder added for the router as well. Everything on my local network works just fine, all my internal resources can be resolved. For the time being, I've stopped the Firewall service. I'm not 100% used to Server 2008 yet, but it might be a case of just missing something simple. Thanks for your time.

  Read the article

• How do I use a Zyxel P660 router as just modem so that I can connect a WRT54GL router in cascade?

  - by Kenji Kina

  I have a Zyxel P660HW-t1 v2 router (which has a DSL port) and a WRT54GL router (which does not) and the exact same situation as in this thread (UPDATE: the connection between both devices is the important part, since I have been able to set the zyxel router to act as bridge by itself quite nicely. I have accessed my internet connection directly through a PC using PPPoE without any problems, the issues arise when I try to connect the WRT54GL router between the zyxel "modem" and my PCs). I've been trying to use my Zyxel P660 as a modem only: Setup P660 to bridge mode. Changed WRT54GL's IP address to 192.168.2.1 to avoid a conflict on the network. Configured the PPPoE settings as required on WRT54GL. The thing is that when I connect the Zyxel modem/router on the WRT54GL's internet port the light doesn't turn on. I can confirm that this port has been working ok, so I'm not really sure what's going between the devices. I checked several settings such as IPs, tried disabling DHCP on Zyxel/Linksys, Firewall on both and still nothing. Also, I tried connecting Zyxel directly to a computer in bridge mode and dialed successfully. I have even posted a question here before, thinking that what I asked there was the only thing I needed to get things done. Unfortunately it wasn't, and the guy that solved his issue didn't give enough details in his post (and is quite unlikely to give more details since he was an anonymous user). For one, I don't know how to do this part: connected to the Zyxel through telnet and forced LAN port 1 to be at 100mb as well I can't find the option that does this on the zyxel router. Not through telnet or the web admin. Can anyone help me solve this?

  Read the article

• Problem with PXE boot

  - by user70523

  Hi, I followed the following link for PXE boot, http://www.howtoforge.com/setting-up-a-pxe-install-server-on-ubuntu-9.10-p3 and I was able to ping the client from the server and also when I booted up the client It is getting the IP address from the server. But later,I got this error PXELinux 3.82 2009-06-09 . . . [other informations] !PXE Entry point found (we hope) at 9D3B:0109 via plan A UNDI code segment at 9D3B len 16C2 UNDI data segment at 933B len A000 Getting cached packet 01 02 03 . . . [other informations] TFTP prefix: Trying to load: pxelinux.cfg/ec5db4c0-74fe-d511-b9e7-3d9235afe5a1 Trying to load: pxelinux.cfg/01-00-17-31-b6-5e-a8 Trying to load: pxelinux.cfg/0A64491E Trying to load: pxelinux.cfg/0A64491 Trying to load: pxelinux.cfg/0A6449 Trying to load: pxelinux.cfg/0A644 Trying to load: pxelinux.cfg/0A64 Trying to load: pxelinux.cfg/0A6 Trying to load: pxelinux.cfg/0A Trying to load: pxelinux.cfg/0 Trying to load: pxelinux.cfg/default Unable to locate configuration file Boot failed: press a key to retry or wait for reset I have put all the files mentioned in the link in tftpboot. Can anyone explain what could be the problem. Thanks in advance

  Read the article

• Error with Apache, Nagios and Snorby integration

  - by user1428366

  I'm trying to use apache to serve two different websites (Nagios and Snorby). The problem is that when I try to see the "/snorby" website, apache sends me the "It works" page. If I try to access to "/nagios" it works perfectly. Snorby is running under ruby passenger .This are the config files. <VirtualHost *:80> ScriptAlias /nagios/cgi-bin "/srv/nagios/sbin" <Directory "/srv/nagios/sbin"> # SSLRequireSSL Options ExecCGI AllowOverride None Order allow,deny Allow from all # Order deny,allow # Deny from all # Allow from 127.0.0.1 AuthName "Nagios Access" AuthType Basic AuthUserFile /srv/nagios/etc/htpasswd.users Require valid-user </Directory> Alias /nagios "/srv/nagios/share" <Directory "/srv/nagios/share"> # SSLRequireSSL Options None AllowOverride None Order allow,deny Allow from all # Order deny,allow # Deny from all # Allow from 127.0.0.1 AuthName "Nagios Access" AuthType Basic AuthUserFile /srv/nagios/etc/htpasswd.users Require valid-user </Directory> </VirtualHost> And the other one is this: <VirtualHost *:80> #Alias /snorby "/var/www/snorby-2.6.0/public" # !!! Be sure to point DocumentRoot to 'public'! DocumentRoot /var/www/snorby-2.6.0/public <Directory /var/www/snorby-2.6.0/public> # This relaxes Apache security settings. AllowOverride all # MultiViews must be turned off. Options -MultiViews </Directory> </VirtualHost> If I disable the Nagios webpage, the Snorby webpage works. I think the problem is Snorby because when I try to access to the Ip address with Nagios page disable, the webapplication redirects me to http:// myserverip/dashboard. Can anyone help me please? Thank you so much! Regards

  Read the article

• Remote Desktop to Server 2008R2 fails from one particular Win7 client

  - by Jesse McGrew

  I have a VPS running Windows Web Server 2008 R2. I'm able to connect using Remote Desktop from my home PC (Windows 7), personal laptop (Windows 7), and work laptop (Windows XP). However, I cannot connect from my work PC (Windows 7). I receive the error "The logon attempt failed" in the RDP client, and the server event log shows "An account failed to log on" with this explanation: Subject: Security ID: NULL SID Account Name: - Account Domain: - Logon ID: 0x0 Logon Type: 3 Account For Which Logon Failed: Security ID: NULL SID Account Name: username Account Domain: hostname Failure Information: Failure Reason: Unknown user name or bad password. Status: 0xc000006d Sub Status: 0xc0000064 Process Information: Caller Process ID: 0x0 Caller Process Name: - Network Information: Workstation Name: JESSE-PC Source Network Address: - Source Port: - Detailed Authentication Information: Logon Process: NtLmSsp Authentication Package: NTLM Transited Services: - Package Name (NTLM only): - Key Length: 0 I can connect from the offending work PC if I start up Windows XP Mode and use the RDP client inside that. The server is part of a domain but my account is local, so I'm logging in using a username of the form hostname\username. None of the clients are part of a domain. The server uses a self-signed certificate, and connecting from home I get a warning about that, but connecting from work I just get the logon error.

  Read the article

• Configure APE-Server on Ubuntu10.10 webserver

  - by sadmicrowave

  I'm having problems configuring my ape-server. First, I reside behind a corporate firewall where our own DNS servers are maintained. I requested a domain name for my server and was provided uslonsweb003.us.mycompany.com from my IT group. Therefore, my website works and can be accessed via (intranet only) at http://uslonsweb003.us.mycompany.com/test.php. I followed the instructions at ape-project.org and run the Check Tool at the end only to find I get an error stating: Running test : Contacting APE Server (adding frequency) Can't contact APE Server. Please check the folowing url is pointing to your APE server : http://0.uslonsweb003.us.mycompany.com:6969 my /etc/apache2/apache2.conf module looks as follows: <VirtualHost *:80> Servername uslonsweb003.us.mycompany.com ServerAlias ape.uslonsweb003.us.mycompany.com ServerAlias *.ape.uslonsweb003.us.mycompany.com DocumentRoot "/var/www/" </VirtualHost> my /var/www/ape-jsf/Demos/config.js config section looks as follows: APE.Config.baseUrl = 'http://uslonsweb003.us.mycompany.com/ape-jsf'; APE.Config.domain = 'uslonsweb003.us.mycompany.com'; APE.Config.server = 'uslonsweb003.us.mycompany.com:6969'; The instructions at ape-project.org tell me that the APE.Config.server should be `ape.mydomain.com:6969'; but that does not work (I'm assuming because my corporate DNS does not understand the 'ape' before the domain name since 'ape' was not registered with the IT DNS). So therefore, I changed it to what you see above. Please help!! Thanks in advance UPDATE 1 per the installation instructions located on this page http://www.ape-project.org/wiki/index.php/Advanced_APE_configuration under 'Configure your Server/Computer' (I'm running it on a server obviously) It says I need to add some lines to my DNS config file. It sounds like (since I'm within a corporate network) I would ask my IT group to add the following lines to the DNS configuration file on their end: ape IN A x.x.x.x ; IP address of my APE server *.ape IN CNAME ape I just want to make sure this is all I have to have them add (or if this is even correct) before I ask them.

  Read the article

• Apache not Forwarding Client x509 Certificate to Tomcat via mod_proxy

  - by hooknc

  Hi Everyone, I am having difficulties getting a client x509 certificate to be forwarded to Tomcat from Apache using mod_proxy. From observations and reading a few logs it does seem as though the client x509 certificate is being accepted by Apache. But, when Apache makes an SSL request to Tomcat (which has clientAuth="want"), it doesn't look like the client x509 certificate is passed during the ssl handshake. Is there a reasonable way to see what Apache is doing with the client x509 certificate during its handshake with Tomcat? Here is the environment I'm working with: Apache/2.2.3 Tomcat/6.0.29 Java/6.0_23 OpenSSL 0.9.8e Here is my Apache VirtualHost SSL config: <VirtualHost xxx.xxx.xxx.xxx:443> ServerName xxx ServerAlias xxx SSLEngine On SSLProxyEngine on ProxyRequests Off ProxyPreserveHost On ErrorLog logs/ssl_error_log TransferLog logs/ssl_access_log LogLevel debug SSLProtocol all -SSLv2 SSLCipherSuite ALL:!ADH:!EXPORT:!SSLv2:RC4+RSA:+HIGH:+MEDIUM:+LOW SSLCertificateFile /usr/local/certificates/xxx.crt SSLCertificateKeyFile /usr/local/certificates/xxx.key SSLCertificateChainFile /usr/local/certificates/xxx.crt SSLVerifyClient optional_no_ca SSLOptions +ExportCertData CustomLog logs/ssl_request_log \ "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b" <Proxy *> AddDefaultCharset Off Order deny,allow Allow from all </Proxy> ProxyPass / https://xxx.xxx.xxx.xxx:8443/ ProxyPassReverse / https://xxx.xxx.xxx.xxx:8443/ </VirtualHost> Then here is my Tomcat SSL Connector: <Connector port="8443" protocol="HTTP/1.1" SSLEnabled="true" address="xxx.xxx.xxx.xxx" maxThreads="150" scheme="https" secure="true" keystoreFile="/usr/local/certificates/xxx.jks" keypass="xxx_pwd" clientAuth="want" sslProtocol="TLSv1" proxyName="xxx.xxx.xxx.xxx" proxyPort="443" /> Could there possibly be issues with SSL Renegotiation? Could there be problems with the Truststore in our Tomcat instance? (We are using a non-standard Truststore that has partner organization CAs.) Is there better logging for what is happening internally with Apache for SSL? Like what is happening to the client cert or why it isn't forwarding the certificate when tomcats asks for one? Any reasonable assistance would be greatly appreciated. Thank you for your time.

  Read the article

• mdadm cron job sends email that cron has run

  - by Andrew

  I've got an Ubuntu 8.04 server using mdadm to create several RAID1 arrays. I created /etc/cron.hourly/mdadm as follows: #! /bin/sh set -e mdadm --monitor /dev/md0 /dev/md3 /dev/md4 --oneshot (Yes, the array numbers are not sequential, and I'm not using --scan beacuse I have a degraded array that may or may not have been used as swap and I can't delete, but I think that's a separate issue. If it's the underlying cause of this, I need to fix it.) mdadm sends me email (configured in the /etc/mdadm/mdadm.conf) on DegradedArray etc. events. This is the desired behaviour. What is not desired, and I can't work out, is why cron is sending me (relatively pointless) emails, via an alias in /etc/aliases: From: root@<hostname> (Cron Daemon) To: root@<hostname> Subject: Cron <root@<hostname>> cd / && run-parts --report /etc/cron.hourly Content-Type: text/plain; charset=ANSI_X3.4-1968 X-Cron-Env: <SHELL=/bin/sh> X-Cron-Env: <PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin> X-Cron-Env: <HOME=/root> X-Cron-Env: <LOGNAME=root> Message-Id: <id@hostname> Date: Fri, 7 May 2010 13:17:01 +0930 (CST) /etc/cron.hourly/mdadm: mdadm: Monitor using email address "<root_alias@domain>" from config file I've got a dozen other servers behaving correctly (mdadm sends email, cron doesnt') with identical /etc/crontab files: # /etc/crontab: system-wide crontab # <snip comments> SHELL=/bin/sh PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin # m h dom mon dow user command 17 * * * * root cd / && run-parts --report /etc/cron.hourly <snip anacron jobs> Should I simply remove the --report, or is there something else in my cron config somewhere causing this?

  Read the article

• Static routing on a TP-Link TL-WR1043ND

  - by igor

  My home network setup looks like this: Both routers are TP-Link TL-WR1043ND routers. The basement router handles all devices in the house that are connected via cable, handing out addresses for the 10.89.49.0/24 network via DHCP. Wireless doesn’t really work from the basement, as the signal is too weak, so I have disabled it. To do WiFi, I have added a second (identical) router downstairs. On the WAN side it is assigned the 10.89.49.101 IP address from the basement router, and on its LAN it provides the 10.89.7.0/24 network. Basic internet access works flawlessly from any device this way. I am now facing the problem that I am not able to communicate (e.g. SSH) between all devices, wired or wireless. I am able to connect from a wireless device to a wired device, for example SSH-ing from 10.89.7.X to 10.89.49.Y, but it doesn’t work the other way round—despite the fact that I have added a static route to the basement router: Does anybody have any idea on how to solve it? Both routers have already been upgraded to use the most recent firmware from TP-Link.com (Build 110429), to no avail. Errata: I would like to stick with the official firmware, switching to something like DD-WRT or OpenWrt only as a last resort.

  Read the article

• Setting up ProxyPass for a Virtualmin virtual server

  - by Andy Ibanez

  I am trying to set up my web server so that I can server multiple Ghost.org blogs. I am stuck in one crucial step. To be honest, my knowledge in servers is not so big, so I request your help to do this. Basically, a tutorial I'm reading suggests I set up a VirtualHost in this way: NameVirtualHost *:80 <VirtualHost *:80> ServerName your-url.com ServerAlias www.your-url.com ProxyRequests off ProxyPass / http://127.0.0.1:2368/ ProxyPassReverse / http:/127.0.0.1:2368/ </VirtualHost> So I have gone to the Virtual site on Virtualmin to try to add everything as is. Services Configure Website Edit Directives The problem is, the previous page (Services Configure website) says I can't edit the port: This Apache virtual host belongs to the Virtualmin server linguist.andyibanez.com, so the address, port, base directory and hostname cannot be changed here. And whenever I try to add the ProxyRequests off (the other two can be added fine) directive in Edit Directives manually, I'm simply told that the directive can't be there. So what is the right way to "add" the last three directives in the VirtualHost above to my sub server? Maybe I'm missing a menu item that will help me with this? I request your help as I have looked for a while, Google keeps thinking I want to serve Webmin via Apache when I google "Set up Virtualmin proxypass", and I have no clue what to do.

  Read the article

• Azure can't ping or telnet VM from client

  - by Raif

  I have a VM on Azure with an instance sqlserver 2012 running on it. From my work computer and my home computer I can't get sqlserver management studio connect to it. I have looked at ALL the settings recommended in numerous articles. everything is setup correctly. endpoint 1433 Private and public sqlserver tcp enabled. sqlserver tcp listening on right port sqlserver using mixed auth windows fire wall, holes poked and then disabled on both client and VM can log in from VM using the credentials that I'm trying to use remotely further more I can't ping the dns or ip or tellnet address from my local machines. I can however hit the iis from a browser using the ip. strange. CS asked me to download MS Network Monitor, which I did and pinged and telneted. I have the results saved but can't really make heads or tails of them. CS hasn't responded yet. I can post some info here that would help. EDIT Never one to shrink from a challenge, I deleted my VM and re-did everything. Now it works although my confidence azure is somewhat shaken.

  Read the article

• Asus WL-520GU conflicting subnet (and/or IP) with 2Wire DSL

  - by Paula

  I have an Asus wireless router: WL-520GU... and an AT&T 2Wire for my DSL connection. When I try to browse anywhere, I just get an odd message from the Asus router (in the common Asus broken-English, bad formatting, and awful spelling): http://postimage.org/image/upxrjflcj I guess it's trying to say: Your Asus Router and your 2Wire have the same subnet mask. (It doesn't say if that's good, or bad... but it sounds like they must be different.) but... But for the "solution" it looks like it's trying to say: Your Asus Router and your 2Wire have the same IP address. My Asus has the defaults: 192.168.1.1 and 255.255.255.0 My 2Wire has: 192.168.1.66 I'm not seeing where the conflict(s) could be. The Asus firmware is v3.0.0.14 . None of these problems occur with the old v3.0.0.8 firmware. Any ideas on how to fix this? (PLEASE don't say to run a totally different DD/Tomato firmware because it's "better". I need to fix THIS 1 problem, not try to convince my company to switch everything to an entirely different set of problems.)

  Read the article

• Getting AWStats to work in Ubuntu 12.04

  - by koogee

  I'm new to apache and i'm trying to set up AWStats on my ubuntu 12.04 server. I've followed the guide at Ubuntu docs https://help.ubuntu.com/community/AWStats I set it up according to the instructions and awstats is able to generate initial stats from apache log successfully. I placed the links to awstats in the default virtual host file. However when I try to run http://server-ip-address:8080/awstats/awstats.pl, I get: Error: SiteDomain parameter not defined in your config/domain file. You must edit it for using this version of AWStats. Setup ('/etc/awstats/awstats.conf' file, web server or permissions) may be wrong. Check config file, permissions and AWStats documentation (in 'docs' directory). Here is my /etc/apache2/sites-available/default file: <VirtualHost *:8080> ServerAdmin webmaster@localhost DocumentRoot /home/saad/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /home/saad/www/> Options Indexes FollowSymLinks MultiViews AllowOverride AuthConfig Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> Alias /awstatsclasses "/usr/share/awstats/lib/" Alias /awstats-icon "/usr/share/awstats/icon/" Alias /awstatscss "/usr/share/doc/awstats/examples/css" ScriptAlias /awstats/ /usr/lib/cgi-bin/ Options ExecCGI -MultiViews +SymLinksIfOwnerMatch ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> The only three variables I edited in /etc/awstats/awstats.conf are: LogFile="/var/log/apache2/access.log" SiteDomain="server-name.noip.org" HostAliases="localhost 127.0.0.1 server-name.no-ip.org" The apache server works fine and i'm able to access other pages stored on the server. Any guidance would be welcome.

  Read the article

• Debian and Multipath IO problem

  - by tearman

  Basically the situation is, I have a box running Debian, the box internally has an Intel SCSI RAID controller which is controlling 2 hard drives in RAID1 mode which is where the OS is installed. Further, I have a QLogic fiber channel adapter that connects the unit to a Fiber Channel SAN. My process of installation is I'll install Debian to the local drives, and leave the QLogic firmware out of it for the time being. Then once I get the unit online, I'll install the firmware drivers. This flops my internal drives from /dev/sda to /dev/sdc, which is a bit annoying, but recoverable. Probably should address these by UUID anyways. Once I get back online, I have to install multipath-tools (the framework is a multipath framework). However, once I reboot the machine again, it fails on boot after discovering multipath targets, saying my local drives are busy and cannot be mounted to /root. Any help in what may be the problem here? Or at least how to disable multipath until after the unit boots and then ignores the internal drives?

  Read the article

< Previous Page | 455 456 457 458 459 460 461 462 463 464 465 466  | Next Page >