Search Results

Search found 1833 results on 74 pages for 'floppy disks'.

Page 46/74 | < Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >

• EEE PC 701/4G Surf Internal Drive: Is it really SSD?

  - by Bart Silverstrim

  I have an old EEE PC with the 4 Gig internal drive. Everything I've read keeps saying it's an SSD drive; running lshw tells me that it's an ATA disk, Silicon Motion SM. The thing seems to be rather slow, though. I know it has a 900 Mhz Celeron processor and only 512 meg of RAM, but it seems like drive access is slow even for those specs. Does anyone know if it really has an SSD drive? I thought that compared to regular hard disks SSD's were blazing fast, and this feels like and acts like it's pulling from something more akin to an internal USB memory stick.

  Read the article

• Home server - HP Proliant Microserver - Software and setup - OS on USB stick? [closed]

  - by Lloyd Watkin

  I've just purchased a HP ProLiant Microserver for home use. I want to set up with web server, samba shares, the usual stuff. My question is really about system setup. It has an internal USB socket so I've attempted to install a copy of Fedora 14 onto it. I turned off X/Gnome, but it still ran like a pig. I've now put the OS on one of the internal disks (250Gb, 7200rpm), but I was wondering if there was a way to utilise the internal USB to give me better power-saving allowing the hard drives to be shut down when not in use. How would you set this server up? I'd rather not go to the extra cost of an SSD right now, but if that's the best way then so be it.

  Read the article

• Storage disk format to use to be utilised by all OS

  - by ClothSword

  Aiming to have a large internal HDD to store files, and several OSes on separate disks. They all need to read and write to one storage drive. Ubuntu (13.04+) Mac OSX (10.8+) Windows (7+) What format should the drive be? Would like to avoid buying third party software, here's what I have discerned so far: NTFS - Can't be written to by Mac without buying third party software? ext3 - Windows can't read, third party software in development. Mac has OSXFUSE HFS+ - Buy third party and/or faff around to get working on windows exFAT - Cross platform, but breaks MS patents?

  Read the article

• Checking whether product key will work with SBS 2003

  - by Rob Nicholson

  We've recently absorbed a small company who had a Dell PowerEdge server running SBS 2003. For some reason, the hard disks have been wiped. We have the product key though from the sticker on the side of the case but not the installation media: Win SBS Std 2003 1-2 CPU 5-CAL OEM software We do have a Dell labelled set of four CDs labelled SBS 2003 in our store and I've built a VM from this media but it doesn't prompt for the product key during install. Is there any way to ascertain whether this media will work with this product key without going through activation? I know one can activate several times but would prefer to check we've got the right media before doing this. Thanks, Rob.

  Read the article

• Is vSphere's Data Recover appliance 'production-ready'?

  - by Chopper3

  I have a smallish lab environment (16 x ESX4iU1 hosts and VC4U1) that I periodically want to backup. Normally in production we snap to secondary SAN boxes then have disk-based VTL backups via NetBackup which eventually migrate to off-site removable disks but this seems like an overkill for my own kit. I've spent a bit of time with vSphere's 'Data Recovery' appliance, it was easy enough to setup and I've not really ran into any issues with it but that doesn't mean I trust it fully. Have you had any experiences with it, positive or negative that would help me decide whether to trust it or pay Symantec for more licences? Thank you in advance.

  Read the article

• Losing partitions after every reboot

  - by Winston Smith

  I have an Acer laptop with one hard disk, which up until yesterday had 4 partitions: Recovery Partition (13GB) C: (140GB) D: (130GB) OEM Partition (10GB) I read that the OEM partition has all the stuff needed to restore the laptop to the factory settings, but since I'd already created restore disks and I needed the space, I wanted to get rid of it. Yesterday, I used diskpart to do that. In diskpart, I selected the OEM partition and issued the delete partition override command which removed it. Then I extended the D: partition into the unused space using windows disk management. Everything worked fine, until I rebooted my laptop, at which point the D: drive vanished. Looking in windows disk management again, I can see that there's an OEM partition of 140GB, which is obviously my D: drive. So I used EASEUS Partition Master and assigned a drive letter to the 'OEM' partition and I was able to access my files again. However, every time I reboot, it reverts back. How do I fix this permanently?

  Read the article

• How can I improve performance over SMB/CIFS for an application that has poor write speeds?

  - by Jeremy

  I have a third party application that reads several large files and generates a third large file. Its performance is quite good when the generated file is stored on "local storage", i.e. either a direct attached or iSCSI-based disk. The source files that are read can be stored remotely on our NAS and accessed via SMB with little effect on performance. However, if we attempt to write the target file to any kind of SMB/CIFS share (Samba or Windows Server) the performance drops almost ten-fold. This is unacceptably slow in our case. Writing files to network shares is not otherwise slow. I can copy large files to SMB shares and get great performance - near what I would expect is possible given the disks and network in question. I have a theory that this application's problem with SMB shares has something to do with a lack of write caching over the share and perhaps lots of network roundtrips. Is this possible and is there anything that can be done about it?

  Read the article

• Could today's windows update have caused boot problems?

  - by gjvdkamp

  I have a 64 bit box that is dual boot Windows 7 64bit and Ubuntu. I booted into windows today and saw the 'updates ready' sign on the shutdown button so I clicked to let it install. It took a while to install 2 updates. Then I rebooted but now it doesn't get past the motherboard splash screen. So I don't even get the disks found messages or let alone the prompt to choose windows or Linux. Cold this be caused by the updates? Seems weird for a windows patch to have consequences beyond the windows os, but it seems unlikely to be a coincidence Thanks, Gert-jan

  Read the article

• VMWare Server lck file keeps coming back

  - by muncherelli

  I am running VMWare Server 2.0 on a Debian Lenny system as a host OS. I am getting this error when I try to start a Virtual Machine Cannot open the disk '/var/lib/vmware/Virtual Machines//.vmdk' or one of the snapshot disks it depends on. Reason: Failed to lock the file. So I looked around on the web and found that I need to delete the .lck folder and file in order to get this error This seems to happen any time I reboot my Debian Server. The Virtual Machines sometimes do not recover and this lck file is causing problems. Should I create a cron script that does a rm *.lck on each of my machines on reboot? Looking for any direction on how to resolve this. It seems when i do a "reboot" command it is maybe not gracefully shutting down the VMware containers so the lock files are still intact?

  Read the article

• Reshape linux md raid5 that is already being reshaped?

  - by smammy

  I just converted my RAID1 array to a RAID5 array and added a third disk to it. I'd like to add a fourth disk without waiting fourteen hours for the first reshape to complete. I just did this: mdadm /dev/md0 --add /dev/sdf1 mdadm --grow /dev/md0 --raid-devices=3 --backup-file=/root/md0_n3.bak The entry in /proc/mdstat looks like this: md0 : active raid5 sdf1[2] sda1[0] sdb1[1] 976759936 blocks super 0.91 level 5, 64k chunk, algorithm 2 [3/3] [UUU] [>....................] reshape = 1.8% (18162944/976759936) finish=834.3min speed=19132K/sec Now I'd like to do this: mdadm /dev/md0 --add /dev/sdd1 mdadm --grow /dev/md0 --raid-devices=4 --backup-file=/root/md8_n4.bak Is this safe, or do I have to wait for the first reshape operation to complete? P.S.: I know I should have added both disks first, and then reshaped from 2 to 4 devices, but it's a little late for that.

  Read the article

• Nexenta under KVM?

  - by Nick

  I have an Ubuntu Server running KVM. I'd like to get the benefits of ZFS so I was thinking of installing a virtual machine under KVM running Nexenta (or NexentaStor), allowing that virtual machine to have raw access to a couple of physical hard disks, and then having it share its file system with NFS so that Ubuntu can access it. I've never tried setting up KVM so that the virtual machine has access to physical drives. Does this sound feasible, and is there anything I need to watch out for? Has someone already documented something like this? Does Nexenta/ZFS function basically as well in the virtual environment as if they were running base bones? I can take a small performance hit, but I don't want it to not be as reliable because of the virtualization. Thanks.

  Read the article

• Using off-the-shelf hardware for brand-name servers; Possible? Good idea?

  - by threecheeseopera

  Is it possible or advisable to use 'regular' not-sanctioned-by-the-server-manufacturer hardware in high end servers? Often these manufacturer-supplied parts have a very high price markup, and I wonder if it's always necessary (understanding that they probably apply more rigorous requirements to this hardware). For example, Dell sells 300GB 15,000rpm serial-attached scsi drives for a certain server family for almost $600 each, while newegg sells a drive with the same specs for almost half the price http://www.newegg.com/Product/Product.aspx?Item=N82E16822116059. Do we really need to pay these high markups, especially for disks that are likely RAID-ed and so guarded against catastrophic failure?

  Read the article

• HP DL370 G6 expansion

  - by user72185

  Hi, we are running a HP DL370 server with 6 x 300 gb disks on RAID 5. Due to a Windows update causing our server to fail recently, we couldn't access the data. I now want to separate the data from the OS (Windows server 2008 r2) so that if anything like that happens again, we can route everyone through a separate server. I have seen these HP storageworks enclosures (msa70) and have a couple of questions: Can I just take out our 2.5 inch 10k SAS drives, install them in the new Storageworks NAS and hey presto we would be up and running? If I wanted to then add another drive (I think there are 25 bays), can I just insert a blank but identical drive and the RAID 5 would dynamically expand to incorporate the new drive. Many thanks Adrian

  Read the article

• Pygrub with DRBD on Xen 3.2

  - by Joril

  Hi all, we have a two-node cluster using DRBD 8.2 on CentOS 5.2 64bit. The cluster runs a few VMs on top of Xen 3.2.1, here's the configuration for an Ubuntu Jaunty VM: name = 'dev' bootloader = '/usr/bin/pygrub' memory = '512' vif = [ 'ip=192.168.1.217,mac=00:16:3E:CD:60:80' ] disk = [ 'phy:/dev/drbd24,xvda1,w', 'phy:/dev/drbd25,xvda2,w' ] As you can see, the disks are specified like "phy:", and as such pygrub doesn't know a thing about the underlying drbd device... So my problem is that even though the VM boots just fine, it doesn't handle the state of the drbd device. As a result, when for some reason the device gets to a secondary/secondary state, the VM won't boot, and I have to manually specify which node is primary. I read that starting with Xen 3.3 pygrub understands the "drbd:" specification, and I think that it would fix my problem, but I can't upgrade Xen at the moment... Is there a workaround? For example, could I use the 3.3 version of pygrub? Thanks!

  Read the article

• kernel warning disk error for command write - solaris svm

  - by help_me

  Recently this warning came up on my message logs, scsi: [ID 107833 kern.warning] WARNING: /pci@1c,600000/scsi@2/sd@0,0 (sd0): Oct 27 00:14:44 Error for Command: write(10) Error Level:Retryable Oct 27 00:14:44 scsi: [ID 107833 kern.notice] Requested Block: 101515828 Error Block: 101515828 Oct 27 00:14:44 scsi: [ID 107833 kern.notice] Vendor: SEAGATE Serial Number: 0441B9B5H Oct 27 00:14:44 scsi: [ID 107833 kern.notice] Sense Key: Hardware Error Oct 27 00:14:44 scsi: [ID 107833 kern.notice] ASC: 0x19 (defect list error), ASCQ: 0x0, FRU: 0x2 This is showing signs of disk failing in my opinion. I have not seen the messages re-occurring. This is on a Solaris 9 Sparc system V240. The disks are managed by SVM and "metadb" is showing the flags as "a" Are there any tests or indications as to check/see if the disk is actually failing or was that error message initiated by something else. Thank you!

  Read the article

• How to use 3T SAS HDDs which aren't supported by Dell PERC 6i

  - by Sunry

  We bought several 3T SAS hard disks want to use with our Dell R710 server. But we found our R710 can't recognize the 3T hd, and then we dig out the raid card is PERC 6i which doesn't support it. Contacted with Dell that H700 and H800 support 3T hd, thought we can buy a H700 , but the SAS cable is not available in the market right now. And it seems very hard for us to change the raid card, also no suitable tools to tease the special screws. So I want to know if any other method to use these 3T hds instead of putting them in the warehouse? Can I low formatting it to 2TB, and plug it into Dell R710 to use? Or a SAS to USB adapter to use it as USB external disk? I just want to use them by Dell R710 even external.

  Read the article

• Transfer Raid Drives to External Enclosure

  - by dubbeat

  I have 2 raid disks (a grand total of 360GB) in my laptop. I'm fast running out of space and want to install new drives. I've a pretty good idea how to do this. My question is what can I do with the drives that I remove? I've got lots of media files on these drives that I'd like to keep and maybe transfer back onto my laptop once I have the new drives installed. Bearing in mind that I know next to nothing about hardware how do you suggegst I go about reusing the removed drives somehow? Thanks,

  Read the article

• Strange Exchange 2010 Mailbox issues

  - by jmreicha

  A little bit of information on my environment. I have 2 Exchange 2010 mailbox servers setup in a DAG, connected to a VNX SAN via fiber for the mailbox database disks. One of the servers seems to be working fine as it isn't throwing any similar errors but the other has been receiving strange errors in Event Viewer. I haven't been able to find a pattern to when these happen and I'm not really sure what I should be looking at to troubleshoot this. At this point I am wondering if the issue resides on the SAN or if this is because of an improper shutdown or something else on the Exchange side of things? Here are a few of the errors if that helps:

  Read the article

• What hardware factors may be considered bottlenecks on a Hyper-V virtual server during load testing?

  - by sean

  Our organization is load testing our application using virtual servers via Hyper-V to see what the user load can be using fair equipment on a single box setup. The developer group questioned the validity of the tests given the normal use of the box by the other virtual machines. IT admins answered that it is an acceptable platform to load test on because it has its own CPUs, memory and disks allocated. Is their answer mostly correct? What hardware factors may be considered bottle necks given the other virtual machines when testing our application? For example, would bus speed be a concern or network IO? The application consists of a windows service written using the 4.0 .NET Framework and SQL Server 2008 R2.

  Read the article

• Restoring files from blueprint on command

  - by Nick

  I am setting up a server. I already have rented a machine running centOS 6 but I have run into a bit of a technical problem with configuring the server software: The server will have some files that it will try to read/write to them but what I need is a way to have a blueprint of these files and everytime the server restarts the files that it used get deleted and replaced by the blueprints. I have heared of a RAM disks or Virtual File Systems but didnt quite understand how they work or how to set them up. The server software is written in java which means bash commands can be run from it. I cannot modify what happens when the server shuts down entirely what I can do is run a command before the server runs the final shutdown save

  Read the article

• Is there still a place for tape storage?

  - by Jon Ericson

  We've backed up our data on LTO tapes for years and it's a real comfort to know we have everything on tape. A sister project and one of our data providers have both moved to 100% disk storage because the cost of disk has dropped so much. When we propose systems to potential customers these days we tend to downplay or not mention our use of tape systems for data storage since it might seem outdated. I feel more comfortable with having data saved in two separate formats: disks and tape. In addition, once data is securely written to tape, I feel (perhaps naively) that it's been permanently saved. Not having to rely on a RAID controller to be able to read back data is another plus for me. Do you see a place for tape backup these days?

  Read the article

• How do I access files inside a Wubi virtual ext4 Ubuntu partition from within Windows?

  - by aalaap

  I just installed Ubuntu 10.04 using Wubi on a PC that has Windows XP and Windows 7 installed. I was working in it for a while and everything is just fine. However, when I booted back into Windows 7, I couldn't figure out a way to access the files I had created or downloaded into the Ubuntu partition. They're in a virtual disk called root.disk in my C:\ubuntu\disks. Is there a way I can mount this vhd into Windows or at least browse the contents and extract what I need?

  Read the article

• Can Windows 7 restore itself from image to a smaller HDD than original?

  - by Borek

  I've created a full system image using the built-in Win7 utility, it was from a 300GB drive but there is only about 50GB of data. I then swapped disks in my notebook, the new one being 80GB SSD and now when I boot to the system restore applet, go through all of the settings (finding the backed up image on a network share, confirming that I'm willing to repartition my disk etc.), I get this: The system image restore failed. No disk that can be used for recovering the system disk can be found. [Details] Is this because I'm trying to restore to a smaller disk? (Even though the data should fit without any problems, there being only 50GB of it.)

  Read the article

• How do I catalog files on several external hard drives that I want to store off-line? OSX

  - by raudi

  My partner, an artist, has more than 10 external hardisks both USB and firewire and every 2-3 months a new one has to be added (She's working with videos and pictures) currently its 10TB and growing so too much for a affordable NAS. Right now the files are not indexed and I think can not be searched with spotlight because not all drives can be connected at the same time. So if she wants to search for a file, she has to guess which disk/disks (based mostly on the date) and then search several drives. Now I'm looking for a solution to index/catalog the drives, something like GentibusCD Cathy Disclib (all these solutions are unfortunately Windows only) Is there any software for OSX that will catalog all the hard drives, so she can search the catalog, find the files, and get the ID of the disk / disk name that has the content? Preferably something with a GUI so my partner can also use it easily Preferably with Thumbnails for pictures/videos (But even an equivalent to "tree /F /A" would be better than nothing)

  Read the article

• mysql error code 13 on windows xampp caused by lower case table names = 0

  - by user127379

  I can import an sql (from test linux server mysql) file if the lower case setting is removed. But then the table names are lower case and the web site doesn't work. Originally it was working (my.ini with the lower case settings), I then exported to a linux server, it was working there. Now importing back to my windows (xampp setup) fails. After wild goose chase looking at disks and permissions, I found that if I remove the lower_case_table_names=0, the import works! But I need the case sensitive command so that I can deploy on the linux server.

  Read the article

< Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >