Search Results

Search found 25706 results on 1029 pages for 'issue tracking'.

Page 461/1029 | < Previous Page | 457 458 459 460 461 462 463 464 465 466 467 468  | Next Page >

  • SBS 2008 SP2 Backup - Volume Shadow Copy Operation Failed

    - by Robert Ortisi
    Server Setup Exchange 2007 Version: 08.03.0192.001 (Rollup 4) Windows Small Business Server 2008 SP2 (Rollup 5) Exchange set up on D: drive (449 GB / 698 GB Free) 80 GB / 148 GB Free on OS drive. Issue Backup Failure (VSS related) Backup Software Windows Server Backup (ver 1.0) Simplified Error Creation of the shared protection point timed out. Unknown error (0x81000101) The flush and hold writes operation on volume C: timed out while waiting for a release writes command. Volume Shadow Copy Warning: VSS spent 43 seconds trying to flush and hold the volume \?\Volume{b562a5dd-8246-11de-a75b-806e6f6e6963}. This might cause problems when other volumes in the shadow-copy set timeout waiting for the release-writes phase, and it can cause the shadow-copy creation to fail. Trying again when disk activity is lower may solve this problem. What I've tried Server Reboot. Updated Server and Exchange. ReConfigured Sharepoint (Helped resolve last vss error I encountered). registered VSS Dll's (Backups will sometimes work afterwards but VSS writers fail soon after). Tried Implementing Hotfix: http://support.microsoft.com/kb/956136 Tried Implementing Hotfix: http://support.microsoft.com/kb/972135 I left it for a few days and a few backups came through but then began to fail again. Detailed Information Log Name: Application Source: VSS Date: 16/11/2011 8:02:11 PM Event ID: 12341 Task Category: None Level: Warning Keywords: Classic User: N/A Computer: SERVER.DOMAIN.local Description: Volume Shadow Copy Warning: VSS spent 43 seconds trying to flush and hold the volume \?\Volume{b562a5dd-8246-11de-a75b-806e6f6e6963}. This might cause problems when other volumes in the shadow-copy set timeout waiting for the release-writes phase, and it can cause the shadow-copy creation to fail. Trying again when disk activity is lower may solve this problem. Operation: Executing Asynchronous Operation Context: Current State: flush-and-hold writes Volume Name: \?\Volume{b562a5dd-8246-11de-a75b-806e6f6e6963}\ Event Xml: 12341 3 0 0x80000000000000 1651049 Application SERVER.DOMAIN.local 43 \?\Volume{b562a5dd-8246-11de-a75b-806e6f6e6963}\ Operation: Executing Asynchronous Operation Context: Current State: flush-and-hold writes Volume Name: \?\Volume{b562a5dd-8246-11de-a75b-806e6f6e6963}\ ================================================================================= Log Name: System Source: volsnap Date: 16/11/2011 8:02:11 PM Event ID: 8 Task Category: None Level: Error Keywords: Classic User: N/A Computer: SERVER.DOMAIN.local Description: The flush and hold writes operation on volume C: timed out while waiting for a release writes command. Event Xml: 8 2 0 0x80000000000000 987135 System SERVER.DOMAIN.local ================================================================================== Log Name: Application Source: Microsoft-Windows-Backup Date: 16/11/2011 8:11:18 PM Event ID: 521 Task Category: None Level: Error Keywords: User: SYSTEM Computer: SERVER.DOMAIN.local Description: Backup started at '16/11/2011 9:00:35 AM' failed as Volume Shadow copy operation failed for backup volumes with following error code '2155348001'. Please rerun backup once issue is resolved. Event Xml: 521 0 2 0 0 0x8000000000000000 1651065 Application SERVER.DOMAIN.local 2011-11-16T09:00:35.446Z 2155348001 %%2155348001 ================================================================================== Writer name: 'FRS Writer' Writer Id: {d76f5a28-3092-4589-ba48-2958fb88ce29} Writer Instance Id: {ba047fc6-9ce8-44ba-b59f-f2f8c07708aa} State: [5] Waiting for completion Last error: No error Writer name: 'ASR Writer' Writer Id: {be000cbe-11fe-4426-9c58-531aa6355fc4} Writer Instance Id: {0aace3e2-c840-4572-bf49-7fcc3fbcf56d} State: [1] Stable Last error: No error Writer name: 'Shadow Copy Optimization Writer' Writer Id: {4dc3bdd4-ab48-4d07-adb0-3bee2926fd7f} Writer Instance Id: {054593e2-2086-4480-92e5-30386509ed1b} State: [1] Stable Last error: No error Writer name: 'Registry Writer' Writer Id: {afbab4a2-367d-4d15-a586-71dbb18f8485} Writer Instance Id: {840e6f5f-f35a-4b65-bb20-060cf2ee892a} State: [1] Stable Last error: No error Writer name: 'COM+ REGDB Writer' Writer Id: {542da469-d3e1-473c-9f4f-7847f01fc64f} Writer Instance Id: {9486bedc-f6e8-424b-b563-8b849d51b1e1} State: [1] Stable Last error: No error Writer name: 'BITS Writer' Writer Id: {4969d978-be47-48b0-b100-f328f07ac1e0} Writer Instance Id: {29368bb3-e04b-4404-8fc9-e62dae18da91} State: [1] Stable Last error: No error Writer name: 'Dhcp Jet Writer' Writer Id: {be9ac81e-3619-421f-920f-4c6fea9e93ad} Writer Instance Id: {cfb58c78-9609-4133-8fc8-f66b0d25e12d} State: [5] Waiting for completion Last error: No error ==================================================================================

    Read the article

  • Roaming user profile issues on Server 2008

    - by Alicia White
    I thought I cleared a user's profile from 2008, but it keeps coming back. So, I was looking for the best way to clear a roaming profile in Server 2008, but I have been unable to find anything. But, I did see the post here: http://serverfault.com/questions/18724/user-profile-keeps-loading-temp-profile I wanted to add a comment to that post, but it was closed as not being related to sysadmin. But, I think it IS related because I dealt with precisely this same problem on our Wndows 2008 terminal server. Here was the issue: we have a user who was getting an "unable to load your roaming profile" type of error at logon in Windows 2008. Looking at the server, we could see her temp profile listed in the profile list while she was loggged (listed as a "temporary" and not a "roaming" profile). While she was logged on, a folder called C:\Users\Temp.DOMAIN existed in the users folder, but that disappeared as soon as she logged out. When this thing happened in 2003, we would clear the contents of the roaming profile folder & delete the temp folder in C:\Documents and Settings. The thing is, 2008 behaves a bit differently. Server 2008 created a new roaming profile folder in the roaming profile folder share: \SERVER\ProfileShare\UserName.V2 The local profile disappears from the profile list in System Properties, so there is no profile to clear Also the local profile folder, C:\Users\Temp.DOMAIN doesn't stay on the server when the user logs out, so we can't delete that as we would normally do when this sort of thing happens in Windows 2003 Despite all of this, every time the user logs back on, the frickin' Temp profile always comes back. One of my team-mates, who is much more experienced with 2008, said I should check the registry for the user's profile in this key (the users are listed by SID): HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsNT\CurrentVersion\ProfileList I saw the user's SID listed there, but it ended in .BAK. I checked several other servers where she is having the same profile errors: in all cases, her SID ended with .BAK. For example (xxx replacing the LONG SID): HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\S-1-5-21-xxxxx-xxxx.bak On the server she was logged on to, there were two keys for her profile in the registry: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\S-1-5-21-xxxxx-xxxx and HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\S-1-5-21-xxxxx-xxxx.bak So, here is how I cleared up the issue. I had the user log off. I deleted the apparently bad profiles ending in .BAK from the ProfileList key on each server where it appeared. I made sure her roaming profile folder was empty I made sure that all the TEMP profile folders were gone The user logged back on: no more profile errors! Anyway, I wanted to make a comment on that closed question, but I didn't see any way to re-open the question so I could add it. But, I also would like to know if this is the best practice to clear out a bad roaming profile for Server 2008? I'm having a hard time finding any instructions on line on how best to do this, but this method I used seemed to work. I'd like to find some documentation to give to our Level 1 support staff so they will know how to clear user profiles on 2008 since this seems to be more involved that clearing user profiles in server 2003. Thanks, Alicia

    Read the article

  • DCOM Authentication Fails to use Kerberos, Falls back to NTLM

    - by Asa Yeamans
    I have a webservice that is written in Classic ASP. In this web service it attempts to create a VirtualServer.Application object on another server via DCOM. This fails with Permission Denied. However I have another component instantiated in this same webservice on the same remote server, that is created without problems. This component is a custom-in house component. The webservice is called from a standalone EXE program that calls it via WinHTTP. It has been verified that WinHTTP is authenticating with Kerberos to the webservice successfully. The user authenticated to the webservice is the Administrator user. The EXE to webservice authentication step is successful and with kerberos. I have verified the DCOM permissions on the remote computer with DCOMCNFG. The default limits allow administrators both local and remote activation, both local and remote access, and both local and remote launch. The default component permissions allow the same. This has been verified. The individual component permissions for the working component are set to defaults. The individual component permissions for the VirtualServer.Application component are also set to defaults. Based upon these settings, the webservice should be able to instantiate and access the components on the remote computer. Setting up a Wireshark trace while running both tests, one with the working component and one with the VirtualServer.Application component reveals an intresting behavior. When the webservice is instantiating the working, custom, component, I can see the request on the wire to the RPCSS endpoint mapper first perform the TCP connect sequence. Then I see it perform the bind request with the appropriate security package, in this case kerberos. After it obtains the endpoint for the working DCOM component, it connects to the DCOM endpoint authenticating again via Kerberos, and it successfully is able to instantiate and communicate. On the failing VirtualServer.Application component, I again see the bind request with kerberos go to the RPCC endpoing mapper successfully. However, when it then attempts to connect to the endpoint in the Virtual Server process, it fails to connect because it only attempts to authenticate with NTLM, which ultimately fails, because the webservice does not have access to the credentials to perform the NTLM hash. Why is it attempting to authenticate via NTLM? Additional Information: Both components run on the same server via DCOM Both components run as Local System on the server Both components are Win32 Service components Both components have the exact same launch/access/activation DCOM permissions Both Win32 Services are set to run as Local System The permission denied is not a permissions issue as far as I can tell, it is an authentication issue. Permission is denied because NTLM authentication is used with a NULL username instead of Kerberos Delegation Constrained delegation is setup on the server hosting the webservice. The server hosting the webservice is allowed to delegate to rpcss/dcom-server-name The server hosting the webservice is allowed to delegate to vssvc/dcom-server-name The dcom server is allowed to delegate to rpcss/webservice-server The SPN's registered on the dcom server include rpcss/dcom-server-name and vssvc/dcom-server-name as well as the HOST/dcom-server-name related SPNs The SPN's registered on the webservice-server include rpcss/webservice-server and the HOST/webservice-server related SPNs Anybody have any Ideas why the attempt to create a VirtualServer.Application object on a remote server is falling back to NTLM authentication causing it to fail and get permission denied? Additional information: When the following code is run in the context of the webservice, directly via a testing-only, just-developed COM component, it fails on the specified line with Access Denied. COSERVERINFO csi; csi.dwReserved1=0; csi.pwszName=L"terahnee.rivin.net"; csi.pAuthInfo=NULL; csi.dwReserved2=NULL; hr=CoGetClassObject(CLSID_VirtualServer, CLSCTX_ALL, &csi, IID_IClassFactory, (void **) &pClsFact); if(FAILED( hr )) goto error1; // Fails here with HRESULT_FROM_WIN32(ERROR_ACCESS_DENIED) hr=pClsFact->CreateInstance(NULL, IID_IUnknown, (void **) &pUnk); if(FAILED( hr )) goto error2; Ive also noticed that in the Wireshark Traces, i see the attempt to connect to the service process component only requests NTLMSSP authentication, it doesnt even attmept to use kerberos. This suggests that for some reason the webservice thinks it cant use kerberos...

    Read the article

  • Tunnel is up but cannot ping directly connected network

    - by drmanalo
    We configured a site-to-site VPN and here is the topology. I control the network on the left but not the one on the right. All devices in our network has public IPs. Server---ASA5505---Cisco887======Internet=====ASA5510---devices I can see the tunnel is up and can do extended ping using a loopback interface. From the 10.175 and 10.165 networks, they can also ping my loopback address. I can also dial in using a Cisco VPN client, and can connect to the devices on the right. #show crypto session Crypto session current status Interface: Vlan3 Profile: xxx-profile Session status: UP-ACTIVE Peer: 213.121.x.x port 500 IKEv1 SA: local 77.245.x.x/500 remote 213.121.x.x/500 Active IPSEC FLOW: permit ip 10.0.20.0/255.255.255.240 10.175.0.0/255.255.128.0 Active SAs: 0, origin: crypto map IPSEC FLOW: permit ip 10.0.20.0/255.255.255.240 10.165.0.0/255.255.192.0 Active SAs: 2, origin: crypto map #ping 10.165.29.39 source loopback 2 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 10.165.29.39, timeout is 2 seconds: Packet sent with a source address of 10.0.20.1 !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 16/17/20 ms My problem is the devices on the right cannot reach my server. They could only ping the loopback address and nothing else. I'm pasting some diagnostics related to routing thinking perhaps routing is my issue. I can paste all the running-config on my side of network if needed. #show ip int brief Interface IP-Address OK? Method Status Protocol ATM0 unassigned YES NVRAM administratively down down Ethernet0 unassigned YES NVRAM administratively down down FastEthernet0 unassigned YES unset up up connected to ASA FastEthernet1 unassigned YES unset administratively down down FastEthernet2 unassigned YES unset administratively down down FastEthernet3 unassigned YES unset up up Loopback1 10.0.20.65 YES NVRAM up up Loopback2 10.0.20.1 YES NVRAM up up Virtual-Template1 77.245.x.x YES unset up down Virtual-Template2 77.245.x.x YES unset up down Vlan1 unassigned YES unset down down Vlan3 77.245.x.x YES NVRAM up up connected to the Internet #show run | section ip route ip route 0.0.0.0 0.0.0.0 77.245.x.x ip route 213.121.240.36 255.255.255.255 Vlan3 #show access-list Extended IP access list 102 10 permit ip 10.0.20.0 0.0.0.15 10.175.0.0 0.0.127.255 (3332 matches) 20 permit ip 10.0.20.0 0.0.0.15 10.165.0.0 0.0.63.255 (3498 matches) #show vlan-switch VLAN Name Status Ports ---- -------------------------------- --------- ------------------------------- 1 default active 3 VLAN0003 active Fa0, Fa1, Fa2, Fa3 1002 fddi-default act/unsup 1003 token-ring-default act/unsup 1004 fddinet-default act/unsup 1005 trnet-default act/unsup #show ip route Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP + - replicated route, % - next hop override Gateway of last resort is 77.245.x.x to network 0.0.0.0 S* 0.0.0.0/0 [1/0] via 77.245.x.x 10.0.0.0/8 is variably subnetted, 5 subnets, 3 masks C 10.0.20.0/28 is directly connected, Loopback2 L 10.0.20.1/32 is directly connected, Loopback2 C 10.0.20.64/28 is directly connected, Loopback1 L 10.0.20.65/32 is directly connected, Loopback1 S 10.165.0.0/18 [1/0] via 213.121.x.x 77.0.0.0/8 is variably subnetted, 3 subnets, 3 masks S 77.0.0.0/8 [1/0] via 77.245.x.x C 77.245.x.x/29 is directly connected, Vlan3 L 77.245.x.x/32 is directly connected, Vlan3 213.121.x.0/32 is subnetted, 1 subnets S 213.121.x.x is directly connected, Vlan3 I read some of the posts here which lead to NATing issue but I'not sure of my next step. Should I translate my public address to private and route it to the loopback address? (only guessing) CISCO VPN site to site Site-to-Site VPN between two ASA 5505s only working in one direction Hope someone could help. Thanks in advance!

    Read the article

  • Scenarios for Bazaar and SVN interaction

    - by Adam Badura
    At our company we are using SVN repository. I'm doing programming from both work (main place) and home (mostly experiments and refactoring). Those are two different machines, in different networks and almost never turned on at the same time (after all I'm either at work or at home...) I wanted to give a chance to some distributed version control system and solve some of the issues associated with SVN based process and having two machines. From git, Mercurial and Bazaar I chose to start with Bazaar since it claims that it is designed do be used by human beings. Its my first time with distributed system and having nice and easy user interface was important for me. Features I wanted to achieve were: Being able to update from SVN repository and commit to it. Being able to commit locally steps of my work on a task. Being able to have few separate tasks at the same time in their own local branches. Being able to share those branches between my work and home computer. As a means of transport between work and home computer I wanted to use a pen-drive. Company server will not work since I may not instal there anything. Neither will work a web service repository as I may not upload source code to web (especially if it would be public which seems to be a common case in free web services). This transport should be Bazaar-based (or what ever else I will end with) so it can be done more or less automatically but manual copying and pasting some folders or generating patch files (providing they would work - I have bad experience with patch files in SVN) would work as well if there is no better solution. Yet the pen-drive should only be used for transportation. I do not want to edit or build there. I tried following Bazaar guidelines for integration with SVN. But I failed. I tried both bzr svn-import and bzr checkout providing URL from my repository as both https://... and svn+https://.... In some cases it had some issues with certificates but the output specified argument to ignore them so I did that. Sometimes it asked me to log in (in other cases maybe it remembered... I don't know) which I did. All were running very slow (this could be our server issue) and at some point were interrupted due to connection interruption (this almost for sure is our server issue: it truncates the connection after some time). But since (as opposed to SVN) restarting starts a new rather than from point where it was interrupted I was unable to reach all the ~19000 revisions (ending usually somewhere around 150). What and how should I do with Bazaar? Is is possible to somehow import SVN repository from the local checkout (so that I do not suffer the connection truncation)? I was told that a colleague that used to work with us has done something similar (importing SVN repository with full history) with Mercurial like in no time. So I'm seriously considering now trying Mercurial even if only to see if that will work. But also what are your general guidelines to achieve the listed features?

    Read the article

  • Cannot ping host stale ARP cache?

    - by gkchicago
    I am having a strange issue with a Debian (Lenny/Linux 2.6.26-2-amd64) that has been driving me nuts. On some machines within my network I can ping the host in question just fine, other times I have to manually hard-code the ARP ethernet address for the IP in order to establish connectivity. I've finally worked it down to somehow involving ARP. I just found how to fix it in a way that made it work but I'm looking for help explaining this issue and also I don't trust my fix to be permanent.. My thought process has been the following but I just can't make any sense out of it: Could it be the card? (Intel 82555 rev 4) Could it be because there are two network cards? (Default route is eth0) Could it be because of the network aliases? Lenny? AMD x86_64? Argh.. Thank you for any insight you might have // Ping doesn't go thru [gordon@ubuntu ~]$ ping 192.168.135.101 PING 192.168.135.101 (192.168.135.101) 56(84) bytes of data. --- 192.168.135.101 ping statistics --- 4 packets transmitted, 0 received, 100% packet loss, time 3014ms // Here's the ARP Table, sometimes the .151 address is good, sometimes it // also matches the Gateways MAC like .101 is doing right here. [gordon@ubuntu ~]$ cat /proc/net/arp IP address HW type Flags HW address Mask Device 192.168.135.15 0x1 0x2 00:0B:DB:2B:24:89 * eth0 192.168.135.151 0x1 0x2 00:0B:6A:3A:30:A6 * eth0 192.168.135.1 0x1 0x2 00:1A:A2:2D:2A:04 * eth0 192.168.135.101 0x1 0x2 00:1A:A2:2D:2A:04 * eth0 // Drop the bad arp table listing and set it manually based on /sbin/ifconfig [gordon@ubuntu ~]$ sudo arp -d 192.168.135.101 [gordon@ubuntu ~]$ sudo arp -s 192.168.135.101 00:0B:6A:3A:30:A6 // Ping starts going thru..?!? [gordon@ubuntu ~]$ ping 192.168.135.101 PING 192.168.135.101 (192.168.135.101) 56(84) bytes of data. 64 bytes from 192.168.135.101: icmp_seq=1 ttl=64 time=15.8 ms 64 bytes from 192.168.135.101: icmp_seq=2 ttl=64 time=15.9 ms 64 bytes from 192.168.135.101: icmp_seq=3 ttl=64 time=16.0 ms 64 bytes from 192.168.135.101: icmp_seq=4 ttl=64 time=15.9 ms --- 192.168.135.101 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3012ms rtt min/avg/max/mdev = 15.836/15.943/16.064/0.121 ms The following is my network config on this. gordon@db01:~$ /sbin/ifconfig eth0 Link encap:Ethernet HWaddr 00:0b:6a:3a:30:a6 inet addr:192.168.135.151 Bcast:192.168.135.255 Mask:255.255.255.0 inet6 addr: fe80::20b:6aff:fe3a:30a6/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:15476725 errors:0 dropped:0 overruns:0 frame:0 TX packets:10030036 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:18565307359 (17.2 GiB) TX bytes:3412098075 (3.1 GiB) eth0:0 Link encap:Ethernet HWaddr 00:0b:6a:3a:30:a6 inet addr:192.168.135.150 Bcast:192.168.135.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 eth0:1 Link encap:Ethernet HWaddr 00:0b:6a:3a:30:a6 inet addr:192.168.135.101 Bcast:192.168.135.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 eth1 Link encap:Ethernet HWaddr 00:e0:81:2a:6e:d0 inet addr:10.10.62.1 Bcast:10.10.62.255 Mask:255.255.255.0 inet6 addr: fe80::2e0:81ff:fe2a:6ed0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:10233315 errors:0 dropped:0 overruns:0 frame:0 TX packets:19400286 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1112500658 (1.0 GiB) TX bytes:27952809020 (26.0 GiB) Interrupt:24 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:387 errors:0 dropped:0 overruns:0 frame:0 TX packets:387 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:41314 (40.3 KiB) TX bytes:41314 (40.3 KiB) gordon@db01:~$ sudo mii-tool -v eth0 eth0: negotiated 100baseTx-FD, link ok product info: Intel 82555 rev 4 basic mode: autonegotiation enabled basic status: autonegotiation complete, link ok capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD advertising: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control link partner: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD gordon@db01:~$ sudo route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface localnet * 255.255.255.0 U 0 0 0 eth0 10.10.62.0 * 255.255.255.0 U 0 0 0 eth1 default 192.168.135.1 0.0.0.0 UG 0 0 0 eth0

    Read the article

  • Users suddenly missing write permissions to the root drive c within an active directory domain

    - by Kevin
    I'm managing an active directory single domain environment on some Windows Server 2008, Windows Server 2008 R2 and Windows Server 2012 machines. Since a few weeks I got a strange issue. Some users (not all!) report that they cannot any longer save, copy or write files to the root drive c, whether on their clients (vista, win 7) nor via remote desktop connection on a Windows Server 2008 machine. Even running programs that require direct write permissions to the root drive without administrator permissions fail to do so since then. The affected users have local administrator permissions. The question I'm facing now is: What caused this change of system behavior? Why did this happen? I didn't find out yet. What was the last thing I did before it happened? The last action that was made before it happened was the rollout of a GPO containing network drive mappings for the users depending on their security group membership. All network drives are located on a linux server with samba enabled. We did not change any UAC settings, and they have always been activated. However I can't imagine that rolling out this GPO caused the problem. Has anybody faced an issue like that? Just in case: I know that it is for a specific reason that an user without administrative privileges is prevented from writing to the root drive since windows vista and the implementation of UAC. I don't think that those users should be able to write to drive c, but I try to figure out why this is happening and a few weeks ago this was still working. I also know that a user who is a member of the local administrators group does not execute anything with administrator permissions per default unless he or she executes a program with this permissions. What did I do yet? I checked the permissions of the affected programs, the affected clients/server. Didn't find something special. I checked ALL of our GPOs if there exist any restrictions that could prevent the affected users from writing to the root drive. Did not find any settings. I checked the UAC settings of the affected users and compared those to other users that still can write to the root drive. Everything similar. I googled though the internet and tried to find someone who had a similar problem. Did not find one. Has anybody an idea? Thank you very much. Edit: The GPO that was rolled out does the following (Please excuse if the settings are not named exactly like that, I translated the settings into english): **Windows Settings -- Network Drive Mappings -- Drive N: -- General:** Action: Replace **Properties:** Letter: N Location: \\path-to-drive\drivename Re-Establish connection: deactivated Label as: Name_of_the_Share Use first available Option: deactivated **Windows Settings -- Network Drive Mappings -- Drive N: -- Public: Options:** On error don't process any further elements for this extension: no Run as the logged in user: no remove element if it is not applied anymore: no Only apply once: no **Securitygroup:** Attribute -- Value bool -- AND not -- 0 name -- domain\groupname sid -- sid-of-the-group userContext -- 1 primaryGroup -- 0 localGroup -- 0 **Securitygroup:** Attribute -- Value bool -- OR not -- 0 name -- domain\another-groupname sid -- sid-of-the-group userContext -- 1 primaryGroup -- 0 localGroup -- 0 Edit: The Error-Message of an affected users says the following: Due to an unexpected error you can't copy the file. Error-Code 0x80070522: The client is missing a required permission. The command icacls C: shows the following: NT-AUTORITY\SYSTEM:(OI)(CI)(F) PRE-DEFINED\Administrators:(OI)(CI)(F) computername\username:(OI)(CI)(F) A college just told me that also the primary domain-controller (PDC) changed from Windows Server 2008 to Windows Server 2012. That also may be a reason. Any suggestions?

    Read the article

  • GNU/Linux swapping blocks system

    - by Ole Tange
    I have used GNU/Linux on systems from 4 MB RAM to 512 GB RAM. When they start swapping, most of the time you can still log in and kill off the offending process - you just have to be 100-1000 times more patient. On my new 32 GB system that has changed: It blocks when it starts swapping. Sometimes with full disk activity but other times with no disk activity. To examine what might be the issue I have written this program. The idea is: 1 grab 3% of the memory free right now 2 if that caused swap to increase: stop 3 keep the chunk used for 30 seconds by forking off 4 goto 1 - #!/usr/bin/perl sub freekb { my $free = `free|grep buffers/cache`; my @a=split / +/,$free; return $a[3]; } sub swapkb { my $swap = `free|grep Swap:`; my @a=split / +/,$swap; return $a[2]; } my $swap = swapkb(); my $lastswap = $swap; my $free; while($lastswap >= $swap) { print "$swap $free"; $lastswap = $swap; $swap = swapkb(); $free = freekb(); my $used_mem = "x"x(1024 * $free * 0.03); if(not fork()) { sleep 30; exit(); } } print "Swap increased $swap $lastswap\n"; Running the program forever ought to keep the system at the limit of swapping, but only grabbing a minimal amount of swap and do that very slowly (i.e. a few MB at a time at most). If I run: forever free | stdbuf -o0 timestamp > freelog I ought to see swap slowly rising every second. (forever and timestamp from https://github.com/ole-tange/tangetools). But that is not the behaviour I see: I see swap increasing in jumps and that the system is completely blocked during these jumps. Here the system is blocked for 30 seconds with the swap usage increases with 1 GB: secs 169.527 Swap: 18440184 154184 18286000 170.531 Swap: 18440184 154184 18286000 200.630 Swap: 18440184 1134240 17305944 210.259 Swap: 18440184 1076228 17363956 Blocked: 21 secs. Swap increase 2400 MB: 307.773 Swap: 18440184 581324 17858860 308.799 Swap: 18440184 597676 17842508 330.103 Swap: 18440184 2503020 15937164 331.106 Swap: 18440184 2502936 15937248 Blocked: 20 secs. Swap increase 2200 MB: 751.283 Swap: 18440184 885288 17554896 752.286 Swap: 18440184 911676 17528508 772.331 Swap: 18440184 3193532 15246652 773.333 Swap: 18440184 1404540 17035644 Blocked: 37 secs. Swap increase 2400 MB: 904.068 Swap: 18440184 613108 17827076 905.072 Swap: 18440184 610368 17829816 942.424 Swap: 18440184 3014668 15425516 942.610 Swap: 18440184 2073580 16366604 This is bad enough, but what is even worse is that the system sometimes stops responding at all - even if I wait for hours. I have the feeling it is related to the swapping issue, but I cannot tell for sure. My first idea was to tweak /proc/sys/vm/swappiness from 60 to 0 or 100, just to see if that had any effect at all. 0 did not have an effect, but 100 did cause the problem to arise less often. How can I prevent the system from blocking for such a long time? Why does it decide to swapout 1-3 GB when less than 10 MB would suffice?

    Read the article

  • Netgear VPN endpoint drops connectivity to single IP address

    - by Justin Bowers
    I'm having a strange issue with one of the networks I manage recently. We have about 14 different networks connected together through a Netgear hardware VPN. Everything has been running fine (other than standard connectivity problems) for a few years now, but I've hit a wall with a problem that's just cropped up at one of the VPN endpoint locations. Our primary VPN network is on the 192.168.1.0/24 subnet and our other 13 networks are on the 192.168.2.0/24 - 192.168.14.0/24 subnets. We run a terminal server on the 192.168.1.0/24 network with IP address 192.168.1.100. Starting Thursday of last week, we had a problem with connectivity of the 192.168.2.0/24 network to 192.168.1.100. When troubleshooting the problem, I found that Network 2 (192.168.2.0/24) still had connectivity to the Internet as well as VPN connectivity to Network 1 (192.168.1.0/24). We could ping and connect to any other device other than the server with IP address 192.168.1.100. Also, none of our networks had an issue accessing 192.168.1.100. I ran a scan on Network 2 after assigning static IP addresses to one of the workstations but received no response from 192.168.1.100 (looking for possibly a new device that someone had plugged into Network 2 that had a duplicate IP address with the server). Asking the staff, noone had reported connecting a new device to Network 2 as well. I then assigned a secondary IP address of 192.168.1.88 to the server and could ping and connect to the secondary IP address from Network 2, but still couldn't access it via 192.168.1.100. I then just rebooted the Netgear VPN Firewall (FVS318v3) and after it came back up, connectivity to 192.168.1.100 was restored. Beforehand, when checking for devices with a possible duplicate IP address, I did run a check for available wireless access points and stations and found none (our wireless is secured via MAC address access control through a WG102 device). I thought that it may have been a fluke for some reason since everything came back up after a power cycle of the VPN Firewall. Things ran fine for a few days until this afternoon, when the problem happened again. One of our users claimed that they had connectivity problems to the server and after connecting to the computer, I found that I couldn't ping the server address anymore. I could still ping the alternate IP address of the server though, so I went ahead and rebooted the VPN firewall again and connectivity was restored. Unfortunately, I can't find anything in the security or VPN logs of the firewall that helps point me in the right direction, so I thought I would go ahead and ask to see if anyone else has any other insight into why we've started having this problem. I am aware that it could still be a device with a duplicate IP address of the server on Network 2, but every employee claim states that there's been no such new device brought in to the network. I know this is a long read, but any help is appreciated! Thanks, Justin

    Read the article

  • Unmountable boot volume blue screen, what should I do?

    - by Josh
    I was trying to install an update from NVIDIA for my GTX 560, but while it was installing, my computer shut off. After a few minutes, I turned it back on. It got to the Windows boot screen and then had a blue screen error and if left on it would just keep doing that. A few details about my PC: I haven't added any new hardware or software, I'm running Windows XP Professional 32 bit and Windows XP Professional 64 bit on the same hard drive for about 2 years now. I have 2 other hard drives also, but I don't have one large enough to hold everything from my main hard drive, so formatting isn't an option. Now, as for what I've done so far: I've scanned the RAM with "memtest - 86 v3.4" and it said that it was good. I scanned the hard drive in question with chkdsk /r and it gets to 50% and tells me something along the lines of "the drive has one or more unrepairable problems". I also tried to use chkdsk on the drive I installed the new copy of Windows XP on and it got to 75% then jumped back down to 50% and stayed there (I had to reboot the pc). So, after that, I turned off auto reboot and got to read the blue screen error code and I looked it up only to find that nobody seems to have this problem, just problems close to it. The error code is 0x000000ed and I've seen a lot of these online but none that matched the detailed part of the code UNMOUNTABLE_BOOT_VOLUME 0x000000ed (0xfffffadf513c19a0, 0xffffffffc0000006, 0, 0) So, I have installed another copy of Windows XP Professional 32 bit on one of my other hard drives in hopes of accessing the data on the drive in question and when it booted it asked if I wanted chkdsk to scan the drive in question and this is what it found: file record segments 12740, 12741, 12742 and 12743 were reported unreadable. Then it says "recovering lost files" but it sits there for a few seconds and then just boots to Windows. I can't access the drive in question from Windows as far as I can tell, it just says "drive not accessible" and when I go to properties it says that the drive has 100% free space. So, after that failed I didn't give up, I looked for another way to access the drive in question. I used a Ubuntu bootable disk and was able to access the drive in question without any problems. However, I can't access the registry editor because it's a .exe file and that won't load from Ubuntu. I made a copy of the "Windows" folder and put it on one of my other drives and that's where I'm stuck at now. I'm sure my drive works fine, I know chkdsk can't fix the problem with it and I know what caused the problem in the first place for the most part, but I don't know what to do about it. I have a laptop that I can use to download and burn disks if needed and I also have the other copy of Windows XP Professional 32 bit that I can use that's installed on the computer in question (so I know it's not a hardware issue). I'm pretty sure it's a driver issue or the update was editing the registry when it shut off and left me when a broken registry. I've tried accessing C:\Windows\System32\CONFIG only to find that the Windows XP disk repair option can't even access the files on the drive in question. It seems I'll need to be able to do everything from Ubuntu unless there is something I haven't tried with the Windows XP disk. I didn't install the update on Windows XP 64 bit but yet it also has the same blue screen error (that's where the error code above came from but I haven't checked to see if they are the same). They both stopped working at the same time, so I assume it's one problem causing both to not work.

    Read the article

  • How clean is deleting a computer object?

    - by Kevin
    Though quite skilled at software development, I'm a novice when it comes to Active Directory. I've noticed that AD seems to have a lot of stuff buried in the directory and schema which does not appear superficially when using simplified tools such as Active Directory Users and Computers. It kind of feels like the Windows registry, where COM classes have all kinds of intertwined references, many of which are purely by GUID, such that it's not enough to just search for anything referencing "GadgetXyz" by name in order to cleanly remove GadgetXyz. This occasionally leads to the uneasy feeling that I may have useless garbage building up in there which I have no idea how to weed out. For instance, I made the mistake a while back of trying to rename a DC, figuring I could just do it in the usual manner from Control Panel. I found references to the old name buried all over the place which made it impossible to reuse that name without considerable manual cleanup. Even long after I got it all working, I've stumbled upon the old name hidden away in LDAP. (There were no other DCs left in the picture at that time so I don't think it was a tombstone issue.) More specifically, I'm worried about the case of just outright deleting a computer from AD. I understand the cleanest way to do it is to log into the computer itself and tell it to leave the domain. (As an aside, doing this in Windows 8 seems to only disable the computer object and not delete it outright!) My concern is cases where this is not possible, for instance because it was on an already-deleted VM image. I can simply go into Active Directory Users and Computers, find the computer object, click it, and press Delete, and it seems to go away. My question is, is it totally, totally gone, or could this leave hanging references in any Active Directory nook or cranny I won't know to look in? (Excluding of course the expected tombstone records which expire after a set time.) If so, is there any good way to clean up the mess? Thank you for any insight! Kevin ps., It was over a year ago so I don't remember the exact details, but here's the gist of the DC renaming issue. I started with a single 2008 DC named ABC in a physical machine and wanted to end up instead with a DC of the same name running in a vSphere VM. Not wanting to mess with imaging the physical machine, my plan instead was: Rename ABC to XYZ. Fresh install 2008 on a VM, name it ABC, and join it to the domain. (I may have done the latter in the same step as promoting to DC; I don't recall.) dcpromo the new ABC as a 2nd DC, including GC. Make sure the new ABC replicated correctly from XYZ and then transfer the FSMO roles from XYZ to it. Once everything was confirmed to work with the new ABC alone, demote XYZ, remove the AD role, and remove it from the domain. Eventually I managed to do this but it was a much bumpier ride than expected. In particular, I got errors trying to join the new ABC to the domain. These included "The pre-windows 2000 name is already in use" and "No mapping between account names and security IDs was done." I eventually found that the computer object for XYZ had attributes that still referred to it as ABC. Among these were servicePrincipalName, msDS-AdditionalDnsHostName, and msDS-AdditionalSamAccountName. The latter I could not edit via Attribute Editor and instead had to run this against XYZ: NETDOM computername <simple-name> /add:<FQDN> There were some other hitches I don't remember exactly.

    Read the article

  • Linux not buffering block I/O when the device is not "in use" (i.e. mounted)

    - by Radek Hladík
    I am installing new server and I've found an interesting issue. The server is running Fedora 19 (3.11.7-200.fc19.x86_64 kernel) and is supposed to host a few KVM/Qemu virtual servers (mail server, file server, etc..). The HW is Intel(R) Xeon(R) CPU 5160 @ 3.00GHz with 16GB RAM. One of the most important features will be Samba server and we have decided to make it as virtual machine with almost direct access to the disks. So the real HDD is cached on SSD (via bcache) then raided with md and the final device is exported into the virtual machine via virtio. The virtual machine is again Fedora 19 with the same kernel. One important topic to find out is whether the virtualization layer will not introduce high overload into disk I/Os. So far I've been able to get up to 180MB/s in VM and up to 220MB/s on real HW (on the SSD disk). I am still not sure why the overhead is so big but it is more than the network can handle so I do not care so much. The interesting thing is that I've found that the disk reads are not buffered in the VM unless I create and mount FS on the disk or I use the disks somehow. Simply put: Lets do dd to read disk for the first time (the /dev/vdd is an old Raptor disk 70MB/s is its real speed): [root@localhost ~]# dd if=/dev/vdd of=/dev/null bs=256k count=10000 ; cat /proc/meminfo | grep Buffers 2621440000 bytes (2.6 GB) copied, 36.8038 s, 71.2 MB/s Buffers: 14444 kB Rereading the data shows that they are cached somewhere but not in buffers of the VM. Also the speed increased to "only" 500MB/s. The VM has 4GB of RAM (more that the test file) [root@localhost ~]# dd if=/dev/vdd of=/dev/null bs=256k count=10000 ; cat /proc/meminfo | grep Buffers 2621440000 bytes (2.6 GB) copied, 5.16016 s, 508 MB/s Buffers: 14444 kB [root@localhost ~]# dd if=/dev/vdd of=/dev/null bs=256k count=10000 ; cat /proc/meminfo | grep Buffers 2621440000 bytes (2.6 GB) copied, 5.05727 s, 518 MB/s Buffers: 14444 kB Now lets mount the FS on /dev/vdd and try the dd again: [root@localhost ~]# mount /dev/vdd /mnt/tmp [root@localhost ~]# dd if=/dev/vdd of=/dev/null bs=256k count=10000 ; cat /proc/meminfo | grep Buffers 2621440000 bytes (2.6 GB) copied, 4.68578 s, 559 MB/s Buffers: 2574592 kB [root@localhost ~]# dd if=/dev/vdd of=/dev/null bs=256k count=10000 ; cat /proc/meminfo | grep Buffers 2621440000 bytes (2.6 GB) copied, 1.50504 s, 1.7 GB/s Buffers: 2574592 kB While the first read was the same, all 2.6GB got buffered and the next read was at 1.7GB/s. And when I unmount the device: [root@localhost ~]# umount /mnt/tmp [root@localhost ~]# cat /proc/meminfo | grep Buffers Buffers: 14452 kB [root@localhost ~]# dd if=/dev/vdd of=/dev/null bs=256k count=10000 ; cat /proc/meminfo | grep Buffers 2621440000 bytes (2.6 GB) copied, 5.10499 s, 514 MB/s Buffers: 14468 kB The bcache was disabled while testing and the results are same on faster (newer) HDDs and on SSD (except for the initial read speed of course). To sum it up. When I read from the device via dd first time, it gets read from the disk. Next time I reread it gets cached in the host but not in the guest (thats actually the same issue, more on that later). When I mount the filesystem but try to read the device directly it gets cached in VM (via buffers). As soon as I stop "using" it, buffers are discarded and the device is not cached anymore in the VM. When I looked into buffers value on the host I realized that the situation is the same. The block I/O gets buffered only when the disk is in use, in this case it means "exported to a VM". On host, after all the measurement done: 3165552 buffers On the host, after the VM shutdown: 119176 buffers I know it is not important as the disks will be mounted all the time but I am curious and I would like to know why it is working like this.

    Read the article

  • Ubuntu 10.04: OpenVZ Kernel and pure-ftpd issues on HOST (no guest setup yet)

    - by Seidr
    After compiling and installing the OpenVZ flavour of kernel under Ubuntu 10.04, I am unable to browse to certain directories when connecting to the pure-ftpd server. The clients are dropping into PASSIVE mode, which is fine. This behaviour was happening before the change of kernel, however now when I browse to certain directories the connection just gets dropped. This only happens with a few directories under one login (web in specific), where as with another login it happens as soon as I connect. I've got the nf_conntrack_ftp kernel module installed (required to keep track of passive FTP connections as I understand, and an alias of the ip_conntrack_ftp module), however this has provided no alleviation of my problem. This module was actually required upon initial setup of my OS to get passive FTP working correctly, however when I compiled the OpenVZ kernel a lot of these modules were missing (iptables, conntrack etc). I recompiled the kernel with the missing modules, but to no effect. I've turned verbosity for the pure-ftpd server up, and still no clues have been spotted in either syslog or the transfer log. Neither did an strace provide any clues (that I could discern anyway) - although one strange thing is both in the output to the client and in the strace I notice that it does infact probe the directory and return the number of matches - it just fails after that. One more thing to mention is that if I FTP using the same credentials locally, everything works fine. This suggests that it is in fact an issue with either the conntrack_ftp module not functioning as expected, or a deeper networking issue. The Kernel was compiled and installed following the instructions at https://help.ubuntu.com/community/OpenVZ - bar the changes to the Kernel configuration (such as add iptables as a module). Below is an example of the log sent to the data (under FileZilla). Status: Resolving address of xxxx.co.uk Status: Connecting to 78.46.xxx.xxx:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 4 of 10 allowed. Response: 220-Local time is now 08:52. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: USER xxx Response: 331 User xxx OK. Password required Command: PASS ******** Response: 230-User xxx has group access to: client1 sshusers Response: 230 OK. Current restricted directory is / Command: OPTS UTF8 ON Response: 200 OK, UTF-8 enabled Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Status: Directory listing successful Status: Retrieving directory listing... Command: CWD /web Response: 250 OK. Current directory is /web Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PORT 10,0,2,30,14,143 Response: 500 I won't open a connection to 10.0.2.30 (only to 188.220.xxx.xxx) Command: PASV Response: 227 Entering Passive Mode (78,46,79,147,234,110) Command: MLSD Response: 150 Accepted data connection Response: 226-ASCII Response: 226-Options: -a -l Response: 226 57 matches total Error: Could not read from transfer socket: ECONNRESET - Connection reset by peer Error: Failed to retrieve directory listing Any suggestions please? I'm willing to try anything!

    Read the article

  • SharePoint Upgrade Global Nav Quirks?

    - by elorg
    We're working on a parallel install/upgrade of SharePoint. The client has WSS 2003 on some old hardware. We've installed MOSS 2007 in a medium farm environment. They want to use this as an opportunity to not just upgrade and use the new features, but to also better organize their content and categorize between different site collections. To accommodate, we've created a few site collections per their specifications in the new environment, and when we ran an upgrade test run we ran into a few .. quirks. We made a backup of the old content database, copied it over to the new environment and restored it as a new database. Created a new web app and attached the migrated data to do an in-place upgrade in this new "test" area. This seems pretty standard - no issues. We have to do a little bit of cleanup (e.g. reset pages to site definition, reset themes, and inherit the global nav / top link bar, etc.). Once that's done, we're using stsadm export/import to copy the individual sites over to their ultimate destinations in the various different site collections. So far so good. But then we ran into one particular site that has a link to an .aspx page in the top link bar in WSS 2003 that's not behaving properly after the upgrade. It's just a link to a "dashboard" .aspx page in a doc library - nothing special. It doesn't seem to matter what we do, or what order we do it (in the "test" web app, in the destination web app, or both). In the end, this ONE site will not allow us to create a link/tab in the global nav. It can inherit the global nav just fine. We can break the inheritance just fine. But if we want to manually add a link in the top link bar - we go through the steps that I've done 1,000x before and click OK - and the tab never appears. It doesn't matter if it's to a page within the site itself, or to Google. We can migrate over other sites into the same site collection and add a tab without issue. If we migrate this quirky site over to another site collection we run into the same issue. Yet, in the "test" web app that we're using to upgrade the data we can add a tab? If we add the tab before we export/import to the final destination, the tab is lost during the process? Has anyone run into anything like this? Any ideas? I've tried every combination of everything that I can think of and nothing works. Unless we can figure out how to get this to work, we're going to just add this tab to the global nav for the entire site collection and inherit it for this site (but that adds the link to all of the site that will inherit, which is both a pro & con for them).

    Read the article

  • Strange enduser experience with Liferay, Glassfish and Apache on RedHat

    - by Pete Helgren
    Tried multiple forums to get to the bottom of this. I hope I can get some direction here: Here is the stack I am working with: Red Hat Enterprise Linux Server release 5.6 (Tikanga) Liferay 6.0.6 on Glassfish 3.0.1 MySQL 5.0.77 Apache 2.2.3 The Liferay portal provides a variety of portlets to end users. Static content (web pages), static resources (primarily pdf and mp3 files 1mb - 80mb in size), File upload and download capabilities (primarily 40-60mb mp3 files) and online streaming of those MP3 files. Here is the strange end user experiences: Under normal load: (20-30) users uploading, downloading or streaming files and 20-30 accessing static content (some of it downloads), we see the following: 1) Clicking a link triggers the download of a portion of an MP3 (the portion is a few seconds long). 2) Clicking on a link tiggers the download of the page content rather than rendering. 3) Clicking a link causes the page to dump binary data to the end user rather than the expected content. 4) Clicking a link returns the text of a javascript file rather than rendering the page. Each occurrence is totally random (or appears so). Sometimes it works, sometimes it doesn't. It seems to have no relation to browser or client OS. The strange events seem to occur much more frequently when using an SSL connection rather than regular http. Apache serves as a proxy server only (reverse). It basically passes all the requests through to Glassfish. There isn't any static content proxy served by Apache. We rebuilt the entire stack from scratch and redeployed the portlet wars and still have the same issues. Liferay is running as a single server (not clustered). We disabled mod_cache in Apache. The problems are more frequent as the server load grows. This morning the load is pretty light and we are seeing few problems but the use of the site will grow, particularly tonight around 9pm CST through Wednesday morning. You could try the site (http://preview.bsfinternational.org) during those times and I would expect that you might experience one of the weirdnesses as you randomly click links on the site (https is invoked only when signed in). Again, https seems to exacerbate the issue. This seems very much like a caching issue but I don't know where in the stack to start peeling the onion. Apache? Liferay? Glassfish? MySQL? Maybe even Redhat? We are stumped and most forums we have posted to (LifeRay and Glassfish) have returned very few suggestions. I just need an idea of where to start looking. I understand that we could have a portlet EDIT: Opening the files in a Hex editor that appear to be pages that download rather than render, we see that the first 4000 characters are "junk" and then the "HTTP/1.1 ...." 'normal' header is seen. So something is dumping a jumble of characters up to offset 4000 (when viewing it in a Hex editor). Perhaps a clue? Ideas?

    Read the article

  • Issues with Verizon's "Network Extender" device talking on my home network.

    - by Logan
    I recently switched my phone service to Verizon from ATT, and I get somewhat spotty service in my house. I called them and they sent me a "network extender" device for free. Its a femtocell that connects to my home network. The directions that come with it are very dumbed down, basically just say to connect it to your router and put it near a window (so it can get a GPS signal, it has to make sure its within the correct area before operating). The problem I'm having is the network light on it stays red. The troubleshooting information that came with it tells me this means there is a bad network connection. Its connected through an ASUS router running DD-WRT. No other devices on my network have a problem with it, including a Western Digital WDLIVE device, mine and my wife's cell phones (via wifi), a Wii, and an Xbox. If I connect the device directly to my cable modem, the light goes blue (which means good) and it starts working. So this tells me that its definately a configuration issue with my router. Verizon basically washed their hands of me when I connected it to my cable modem, and told me that its a router issue and to try a different router. Because normal people just have extra routers laying around their houses... When I connect it to the router, I can watch the DHCP Clients list on the status page, and the MAC of the network extender quickly fills up the clients list, grabbing every available DHCP address. Its like it grabs an address, can't connect to the internet, releases it, grabs another, then another, then another. So in the DHCP server settings I assigned a static IP to its MAC. This made it quit doing what it was doing before, but its still not working. I found the ports I needed to open on verizon's website, and opened them in the port forwarding config on my router. This still didn't help. So, I tried setting the network extender device's IP as the DMZ IP on the router. This still did no good. I called Verizon back and got the tech to write up a report which he passed on to a "senior network tech" who I got a call back from a few hours ago. This guy told me that while an ASUS router isn't listed as a supported device, he's not really sure why its not working. He suggested restoring the firmware to stock ASUS firmware and trying again. I have a very hard time believing its DD-WRT doing this, since every other device is working just fine with it. But its also not the Network Extender, since it works just fine when connected directly to the modem. At this point I'm out of ideas, and the next step is to restore the stock firmware on my router, and then going to walmart and getting a linksys WRT-54G to try. Is there anything else I could try before going that drastic? Cliffs- -Network extender won't work behind router, works when connected directly to cable modem. -Extender goes nuts when allowed to pick its own DHCP address, I had to assign it a static IP. -Won't work when correct ports are forwarded to it -Won't work with a DMZ address.

    Read the article

  • Routing not working correctly using the laravel framework

    - by samayres1992
    I'm using the book wrote by one of the guys that created laravel, so I'd like to think for the most part this code isn't horribly wrong. My server is setup with nginx serving all static files and apache2 serving php. My config for each are the following: apache2: <VirtualHost *> # Host that will serve this project. ServerName litl.it # The location of our projects public directory. DocumentRoot /var/www/litl.it/laravel/public # Useful logs for debug. CustomLog /var/log/apache.access.log common ErrorLog /var/log/apache.error.log # Rewrites for pretty URLs, better not to rely on .htaccess. <Directory /var/www/litl.it/laravel/public> <IfModule mod_rewrite.c> Options -MultiViews RewriteEngine On RewriteCond %{REQUEST_FILENAME} !-f RewriteRule ^ index.php [L] </IfModule> </Directory> nginx: server { # Port that the web server will listen on. listen 80; # Host that will serve this project. server_name litl.it *.litl.it; # Useful logs for debug. access_log /var/log/nginx.access.log; error_log /var/log/nginx.error.log; rewrite_log on; # The location of our projects public directory. root /var/www/litl.it/laravel/public; # Point index to the Laravel front controller. index index.php; location / { # URLs to attempt, including pretty ones. try_files $uri $uri/ /index.php?$query_string; } # Remove trailing slash to please routing system. if (!-d $request_filename) { rewrite ^/(.+)/$ /$1 permanent; } # PHP FPM configuration. location ~* \.php$ { proxy_pass http://127.0.0.1:8080; include /etc/nginx/proxy_params; try_files index index.php $uri =404; include /etc/nginx/fastcgi_params; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root/php/$fastcgi_script_name; } # We don't need .ht files with nginx. location ~ /\.ht { deny all; } location @proxy { proxy_pass http://127.0.0.1:8080; include /etc/nginx/proxy_params; } error_page 403 /error/403.html; error_page 404 /error/404.html; error_page 405 /error/405.html; error_page 500 501 502 503 504 /error/5xx.html; location ^~ /error/ { internal; root /var/www/litl.it/lavarel/public/error; } } I'm including these server configs, as I feel this maybe the issue? Here is my incredibly basic routing file that should return "routing is working" on domain.com/test but instead it just returns the homepage. <?php Route::get('/', function() { return View::make('hello'); }); Route::get('/test', function() { return "routing is working"; }); Any ideas where I'm going wrong, I'm following this tutorial very closely and I'm confused why there is issue. Thanks!

    Read the article

  • Trouble getting SSL to work with django + nginx + wsgi

    - by Kevin
    I've followed a couple of examples for Django + nginx + wsgi + ssl, but I can't get them to work. I simply get an error in my browser than I can't connect. I'm running two websites off the host. The config files are identical except for the ip addresses, server names, and directories. When neither use SSL, they work fine. When I try to listen on 443 with one of them, I can't connect to either. My config files are below, and any suggestions would be appreciated. server{ listen xxx.xxx.xxx.xxx:80; server_name sub.domain.com; access_log /home/django/logs/nginx_customerdb_http_access.log; error_log /home/django/logs/nginx_customerdb_http_error.log; location / { proxy_pass http://127.0.0.1:8080; proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; client_max_body_size 10m; client_body_buffer_size 128k; proxy_connect_timeout 90; proxy_send_timeout 90; proxy_read_timeout 90; proxy_buffers 32 4k; } location /site_media/ { alias /home/django/customerdb_site_media/; } location /admin-media/ { alias /home/django/django_admin_media/; } } server{ listen xxx.xxx.xxx.xxx:443; server_name sub.domain.com; access_log /home/django/logs/nginx_customerdb_http_access.log; error_log /home/django/logs/nginx_customerdb_http_error.log; ssl on; ssl_certificate sub.domain.com.crt; ssl_certificate_key sub.domain.com.key; ssl_prefer_server_ciphers on; location / { proxy_pass http://127.0.0.1:8080; proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header X-Forwarded-Protocol https; client_max_body_size 10m; client_body_buffer_size 128k; proxy_connect_timeout 90; proxy_send_timeout 90; proxy_read_timeout 90; proxy_buffers 32 4k; } location /site_media/ { alias /home/django/customerdb_site_media/; } location /admin-media/ { alias /home/django/django_admin_media/; } } <VirtualHost *:8080> ServerName xxx.xxx.xxx.xxx ServerAlias xxx.xxx.xxx.xxx LogLevel warn ErrorLog /home/django/logs/apache_customerdb_error.log CustomLog /home/django/logs/apache_customerdb_access.log combined WSGIScriptAlias / /home/django/customerdb/apache/django.wsgi WSGIDaemonProcess customerdb_wsgi processes=4 threads=5 WSGIProcessGroup customerdb_wsgi SetEnvIf X-Forwarded-Protocol "^https$" HTTPS=on </VirtualHost> UDPATE: the existence of two sites (on separate IPs) on the host is the issue. if i delete the other site, the setting above mostly work. doing so also brings up another issue: chrome doesn't accept the site as secure saying that some content is not encrypted.

    Read the article

  • conflict in debian packages

    - by Alaa Alomari
    I have Debian 4 server (i know it is very old) cat /etc/issue Debian GNU/Linux 4.0 \n \l I have the following in /etc/apt/sources.list deb http://debian.uchicago.edu/debian/ stable main deb http://ftp.debian.org/debian/ stable main deb-src http://ftp.debian.org/debian/ stable main deb http://security.debian.org/ stable/updates main apt-get upgrade Reading package lists... Done Building dependency tree... Done You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies. libt1-5: Depends: libc6 (= 2.7) but 2.3.6.ds1-13etch10+b1 is installed locales: Depends: glibc-2.11-1 but it is not installable E: Unmet dependencies. Try using -f. Now it shows that i have Debian 6!! cat /etc/issue Debian GNU/Linux 6.0 \n \l EDIT I have tried apt-get update Get: 1 http://debian.uchicago.edu stable Release.gpg [1672B] Hit http://debian.uchicago.edu stable Release Ign http://debian.uchicago.edu stable/main Packages/DiffIndex Hit http://debian.uchicago.edu stable/main Packages Get: 2 http://security.debian.org stable/updates Release.gpg [836B] Hit http://security.debian.org stable/updates Release Get: 3 http://ftp.debian.org stable Release.gpg [1672B] Ign http://security.debian.org stable/updates/main Packages/DiffIndex Hit http://security.debian.org stable/updates/main Packages Hit http://ftp.debian.org stable Release Ign http://ftp.debian.org stable/main Packages/DiffIndex Ign http://ftp.debian.org stable/main Sources/DiffIndex Hit http://ftp.debian.org stable/main Packages Hit http://ftp.debian.org stable/main Sources Fetched 3B in 0s (3B/s) Reading package lists... Done apt-get dist-upgrade Reading package lists... Done Building dependency tree... Done You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies. libt1-5: Depends: libc6 (= 2.7) but 2.3.6.ds1-13etch10+b1 is installed locales: Depends: glibc-2.11-1 E: Unmet dependencies. Try using -f. apt-get -f install Reading package lists... Done Building dependency tree... Done Correcting dependencies...Done The following extra packages will be installed: gcc-4.4-base libbsd-dev libbsd0 libc-bin libc-dev-bin libc6 Suggested packages: glibc-doc Recommended packages: libc6-i686 The following packages will be REMOVED libc6-dev libedit-dev libexpat1-dev libgcrypt11-dev libjpeg62-dev libmcal0-dev libmhash-dev libncurses5-dev libpam0g-dev libsablot0-dev libtool libttf-dev The following NEW packages will be installed gcc-4.4-base libbsd-dev libbsd0 libc-bin libc-dev-bin The following packages will be upgraded: libc6 1 upgraded, 5 newly installed, 12 to remove and 349 not upgraded. 7 not fully installed or removed. Need to get 0B/5050kB of archives. After unpacking 23.1MB disk space will be freed. Do you want to continue [Y/n]? y Preconfiguring packages ... dpkg: regarding .../libc-bin_2.11.3-2_i386.deb containing libc-bin: package uses Breaks; not supported in this dpkg dpkg: error processing /var/cache/apt/archives/libc-bin_2.11.3-2_i386.deb (--unpack): unsupported dependency problem - not installing libc-bin Errors were encountered while processing: /var/cache/apt/archives/libc-bin_2.11.3-2_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1) Now: it seems there is a conflict!! how can i fix it? and is it true that the server has became debian 6!!?? Thanks for your help

    Read the article

  • Motion - can't get streaming working from a webcam

    - by Emmanuel Brunet
    I'm trying to record a video stream from my Tenvis IP camera with motion 3.2.12 on Debian 7.5. I used the standard debian package with sudo apt-get install motion Assume my DNS IP cam is webcam, user : admin, password : password /etc/motion/motion.conf Bellow are my configuration file settings : netcam_url http://webcam/videostream.cgi netcam_userpass admin:password target_dir /media/videos/log/motion # The mini-http server listens to this port for requests (default: 0 = disabled) webcam_port 1234 ffmpeg_cap_new on ffmpeg_video_codec mpeg4 output_motion off snapshot_interval 0 # Quality of the jpeg (in percent) images produced (default: 50) webcam_quality 50 # Output frames at 1 fps when no motion is detected and increase to the # rate given by webcam_maxrate when motion is detected (default: off) webcam_motion on # Maximum framerate for webcam streams (default: 1) webcam_maxrate 15 # Restrict webcam connections to localhost only (default: on) webcam_localhost on # Limits the number of images per connection (default: 0 = unlimited) # Number can be defined by multiplying actual webcam rate by desired number of seconds # Actual webcam rate is the smallest of the numbers framerate and webcam_maxrate webcam_limit 0 control_port 8080 control_authentication admin:password Issue #1 when I try display http:/localhost:1234 the browser looks frozen, no HTTP 404 received but it stills waiting for data it seems .. Issue #2 in the output directory motion writes a lot of jpeg snapshots althought I just want to have several video sequenced files. Log I run motion in interactive mode in a terminal, here is the ouput root@mercure:/etc/motion# motion -c motion-1.0.conf [0] Processing thread 0 - config file motion-1.0.conf [0] Motion 3.2.12 Started [0] ffmpeg LIBAVCODEC_BUILD 3482368 LIBAVFORMAT_BUILD 3478785 [0] Thread 1 is from motion-1.0.conf [0] motion-httpd/3.2.12 running, accepting connections [0] motion-httpd: waiting for data on port TCP 8080 [1] Thread 1 started [1] Resizing pre_capture buffer to 1 items [1] Started stream webcam server in port 1234 [1] avcodec_open - could not open codec: Operation now in progress [1] ffopen_open error creating (new) file [~/tmp/motion/01-20140603165303.avi]: Operation now in progress [1] File of type 1 saved to: ~/tmp/motion/01-20140603165303-01.jpg [1] Thread exiting [1] Calling vid_close() from motion_cleanup [1] vid_close: calling netcam_cleanup [1] netcam camera handler: finish set, exiting [0] Motion thread 1 restart [1] Thread 1 started [1] Resizing pre_capture buffer to 1 items [1] Started stream webcam server in port 1234 [1] avcodec_open - could not open codec: Resource temporarily unavailable [1] ffopen_open error creating (new) file [~/tmp/motion/01-20140603165329.avi]: Resource temporarily unavailable [1] File of type 1 saved to: ~/tmp/motion/01-20140603165329-00.jpg [1] Thread exiting [1] Calling vid_close() from motion_cleanup [1] vid_close: calling netcam_cleanup [1] netcam camera handler: finish set, exiting [0] Motion thread 1 restart [1] Thread 1 started [1] Resizing pre_capture buffer to 1 items [1] Started stream webcam server in port 1234 [1] avcodec_open - could not open codec: Connection reset by peer [1] ffopen_open error creating (new) file [~/tmp/motion/01-20140603165355.avi]: Connection reset by peer [1] File of type 1 saved to: ~/tmp/motion/01-20140603165355-06.jpg [1] Thread exiting [1] Calling vid_close() from motion_cleanup [1] vid_close: calling netcam_cleanup [0] httpd - Finishing [0] httpd Closing [0] httpd thread exit [1] netcam camera handler: finish set, exiting [0] Motion thread 1 restart [1] Thread 1 started [1] Resizing pre_capture buffer to 1 items [1] Started stream webcam server in port 1234 It doesn't find the codec ... avcodec_open - could not open codec: Operation now in progress I've changed fmpeg_video_codec from mpeg4 to swf the result is the same. When using flv format motion writes a lot of .jpg image but I can't see anything at http://localhost:1234 [1] File of type 1 saved to: ~/tmp/motion/01-20140603171035-00.jpg [1] File of type 1 saved to: ~/tmp/motion/01-20140603171035-01.jpg [1] File of type 1 saved to: ~/tmp/motion/01-20140603171035-02.jpg [1] File of type 1 saved to: ~/tmp/motion/01-20140603171035-03.jpg [1] File of type 1 saved to: ~/tmp/motion/01-20140603171035-04.jpg [1] File of type 1 saved to: ~/tmp/motion/01-20140603171035-05.jpg [1] File of type 1 saved to: ~/tmp/motion/01-20140603171035-06.jpg [1] File of type 1 saved to: ~/tmp/motion/01-20140603171036-00.jpg [1] File of type 1 saved to: ~/tmp/motion/01-20140603171036-01.jpg [1] File of type 1 saved to: ~/tmp/motion/01-20140603171036-02.jpg Any idea just to get the video stream recoded on my local disk ?

    Read the article

  • Did a recent WinXP update break CD/DVD read speeds? SP2/SP3

    - by quack quixote
    I have two systems with fresh installations of Windows XP Pro SP3 (SP3 slipstreamed into the installer; fully updated after install). One's a refurbished 2.4GHz Pentium4 system; the other is a new 1.6GHz Atom330 build. Both have brand-new dual-layer CD/DVD burners (one's a LiteOn IDE, the other an LG SATA). Both take a really looooong time to read a single-layer DVD in Windows with Cygwin tools. Specifically, 40 minutes or more. I burn backup data to single-layer DVD+/-R and use MD5 hashes for data verification (made with the standard md5sum tool in Unix or Cygwin). The hashes are burned to disc with the data files, and I use this command to verify: $ cd /path/to/disc/mountpoint ; time md5sum -c < md5.txt Here's how long that takes to run on a full single-layer DVD+/-R disc: Old system (WinXP SP2, 1.8GHz Athlon 2500+, last summer): ~10 minutes Old system (Ubuntu 9.04, 1.8GHz Athlon 2500+): ~10 minutes Old system (Debian 5, dual 550MHz P3): ~10 minutes New Pentium4 system (running Ubuntu 9.04): ~5 minutes New Pentium4 system (running WinXP SP3, file copy from Win Explorer): ~6 minutes New Atom330 system (running WinXP SP3, file copy from Win Explorer): ~6 minutes Now the weird stuff: Old system (WinXP SP2, 1.8GHz Athlon 2500+, today): ~25 minutes New Pentium4 system (running WinXP SP3, read from Cygwin): ~40-50 minutes (?!!) New Atom330 system (running WinXP SP3, read from Cygwin): ~40 minutes (can do it in ~30 minutes ...if i have another program spin up the drive first) Since both systems will copy files in 6 minutes using Windows Explorer, I know it's not a hardware problem. Windows just never spins up the drive during the Cygwin read, so it stays super-slow the whole time. Other programs like EAC and DVD Decrypter seem to spin up the disc just fine during their processing. DMA is enabled on both systems. (Can confirm in Windows' Device Manager on the Atom330, not on the P4.) Nero's DriveSpeed tool doesn't seem to have any effect. Copy times are comparable from commandline with Windows' xcopy. Copying with Cygwin's cp looks more like the problem state -- it will spin up the drive for a short time, never reaches full speed, and lets it spin back down again for most of the copy. What I need is to get full read speeds from Cygwin. Is this a known issue with SP3 or some other recent Windows update? Any other ideas? Update: More testing; Windows will spin up the drive when data is copied with Windows tools, but not when read in place or copied with Cygwin tools. It doesn't make sense to me that Windows spins up the drive for copying, but not for other reads. Might be more of a Cygwin problem? Update 2: GUI activity is sluggish during the problem state -- during the Cygwin verifies, there's a slight but noticable delay when dragging windows or icons around on the desktop, switching windows, Alt-Tabbing through open applications, opening new windows, etc. It reminds me of the delay when opening a Windows Explorer window on My Computer just after inserting a DVD. I've tried updating Cygwin (from 1.5.x to 1.7.x), but no change in the problem behavior. I've also noticed this issue occurs on WinXP SP2, but it's not exactly the same -- some spin-up occurs, so the read happens in ~25-30 minutes instead of 40+. The SP2 system used to run the verifies in ~10 minutes, and when it first changed (not sure exactly when, maybe in late November or early December 2009) I thought it was dying hardware. This is why I suspect an official update of breaking this functionality; this has worked for years on that SP2 box.

    Read the article

  • Windows 7 sometimes boots in VGA mode

    - by TuxRug
    I have an Asus G50VT-x5 laptop with nVidia GeForce9800M-GS graphics. Normally, Windows boots normally, but about 20% of the time (rough estimate), it will boot with the fallback VGA driver, maxing out at 800x600 with no Aero. I've checked the system logs and there is nothing indicating an error loading the nVidia driver. It even specifies in the logs that the Nvidia Display Driver service started successfully, even though it has booted in safe graphics mode. This has been happening for a while, but it's happening a little more often now than it was before. Since the first time my system exhibited this behavior, I have updated my graphics driver a handful of times. I used System Information for Windows to check for problems there, but the only thing that stood out was the following: Core Temperature 4486449 °C (8075639 °F) Shaders Temperature 1171513530 °C (2108724330 °F) I know this reading is incorrect, because my laptop is nowhere near the surface of the sun and my desk has not burst into flames. When it's opererating normally, I get a sane reading like [Core Temperature 58 °C (136 °F)] with no Shaders Temperature listed. All I have to do to resolve the issue is reboot. I have seen no stability issues with the graphics or anything else. A long time ago, I had an issue with this computer where my framerate would suddenly drop during a 3D game from 40fps to <1fps, but after looking at the temperature readout immediately after quitting a game, I removed the bottom panel and blew the dust out of the vent and heatsink. Since then I have no drops in framerate under any situation. I have uploaded a zip containing the SIW reports for when the problem is occurring and when the computer is operating normally. I don't have a paid account so it can only be downloaded 10 times, so please only download the reports if you think you can use them. If you try to download the reports and they are no longer available, please comment and I will re-upload them. If you want to look at the files, they are on Rapidshare. EDIT It happened again, and I looked a little deeper into the System logs. When this happens, there are a lot of errors about other device drivers unable to start. All of these errors are for PnP drivers. Also, my USB keyboard and mouse take a few moments before they actually start working, although this happens sometimes the first normal boot as well. I am quite sure this is related, so I am adding the pnp tag. Also, CHKDSK will not run on boot. Even if a check is scheduled or a volume is manually set as dirty, CHKDSK will be skipped entirely, not even leaving an entry in the System logs. I tried running CHKNTFS /D, which did not work. I then manually changed my HKLM\System\CurrentControlSet\Control\Session Manager BootExecute value to the default listed on Microsoft's website. That did not work either. I ended up booting to repair mode and running CHKDSK there, which found a number of minor inconsistencies on my system drive, but none on my data drive. I have no idea if this is related. Some more information for those who don't download my SIW report file: Antivirus and Firewall are ESET Smart Security I have three different virutalization programs installed: VMware Player, Windows Virtual PC, and VirtualBox. The network adapters for these show up in the log of failed device starts. EDIT 2 I tried running sfc /scannow, which reported that it found corrupted files that could not be fixed. The CBS log is extremely cryptic. I tried booting to my install disk, launching repair mode, and doing an offline sfc from there, which produced the same result.

    Read the article

  • PHP.ini does not load

    - by Jonathan Park
    Ok this is probably just me not knowing enough about php but here it goes. I'm on Ubuntu Hardy. I have a custom compiled version of PHP which I have compiled with these parameters. ./configure --enable-soap --with-zlib --with-mysql --with-apxs2=[correct path] --with-config-file-path=[correct path] --with-mysqli --with-curlwrappers --with-curl --with-mcrypt I have used the command pecl install pecl_http to install the http.so extension. It is in the correct module directory for my php.ini. My php.ini is loading and I can change things within the ini and effect php. I have included the extension=http.so line in my php.ini. That worked fine. Until I added these compilation options in order to add imap --with-openssl --with-kerberos --with-imap --with-imap-ssl Which failed because I needed the c-client library which I fixed by apt-get install libc-client-dev After which php compiles fine and I have working imap support, woo. HOWEVER, now all my calls to HttpRequest which is part of the pecl_http extention in http.so result in Fatal error: Class 'HttpRequest' not found errors. I figure the http.so module is no longer loading for one reason or another but I cannot find any errors showing the reason. You might say "Have you tried undoing the new imap setup?" To which I will answer. Yes I have. I directly undid all my config changes and uninstalled the c-client library and I still can't get it to work. I thought that's weird... I have made no changes that would have resulted in this issue. After looking at that I have also discovered that not only is the http extension no longer loading but all my extensions loaded via php.ini are no longer loading. Can someone at least give me some further debugging steps? So far I have tried enabling all errors including startup errors in my php.ini which works for other errors, but I'm not seeing any startup errors either on command line or via apache. And yet again the php.ini appears to be being parsed given that if I run php_info() I get settings that are in the php.ini. Edit it appears that only some of the php.ini settings are being listened to. Is there a way to test my php.ini? Edit Edit It appears I am mistaken again and the php.ini is not being loaded at all any longer. However, If I run php_info() I get that it's looking for my php.ini in the correct location. Edit Edit Edit My config is at the config file path location below but it says no config file loaded. WTF Permission issue? It is currently 644 so everyone should be able to read it if not write it. I tried making it 777 and that didn't work. Configuration File (php.ini) Path /etc/php.ini Loaded Configuration File (none) Edit Edit Edit Edit By loading the ini on the command line using the -c command I am able to run my files and using -m shows that my modules load So nothing is wrong with the php.ini

    Read the article

  • RHCS: GFS2 in A/A cluster with common storage. Configuring GFS with rgmanager

    - by Pavel A
    I'm configuring a two node A/A cluster with a common storage attached via iSCSI, which uses GFS2 on top of clustered LVM. So far I have prepared a simple configuration, but am not sure which is the right way to configure gfs resource. Here is the rm section of /etc/cluster/cluster.conf: <rm> <failoverdomains> <failoverdomain name="node1" nofailback="0" ordered="0" restricted="1"> <failoverdomainnode name="rhc-n1"/> </failoverdomain> <failoverdomain name="node2" nofailback="0" ordered="0" restricted="1"> <failoverdomainnode name="rhc-n2"/> </failoverdomain> </failoverdomains> <resources> <script file="/etc/init.d/clvm" name="clvmd"/> <clusterfs name="gfs" fstype="gfs2" mountpoint="/mnt/gfs" device="/dev/vg-cs/lv-gfs"/> </resources> <service name="shared-storage-inst1" autostart="0" domain="node1" exclusive="0" recovery="restart"> <script ref="clvmd"> <clusterfs ref="gfs"/> </script> </service> <service name="shared-storage-inst2" autostart="0" domain="node2" exclusive="0" recovery="restart"> <script ref="clvmd"> <clusterfs ref="gfs"/> </script> </service> </rm> This is what I mean: when using clusterfs resource agent to handle GFS partition, it is not unmounted by default (unless force_unmount option is given). This way when I issue clusvcadm -s shared-storage-inst1 clvm is stopped, but GFS is not unmounted, so a node cannot alter LVM structure on shared storage anymore, but can still access data. And even though a node can do it quite safely (dlm is still running), this seems to be rather inappropriate to me, since clustat reports that the service on a particular node is stopped. Moreover if I later try to stop cman on that node, it will find a dlm locking, produced by GFS, and fail to stop. I could have simply added force_unmount="1", but I would like to know what is the reason behind the default behavior. Why is it not unmounted? Most of the examples out there silently use force_unmount="0", some don't, but none of them give any clue on how the decision was made. Apart from that I have found sample configurations, where people manage GFS partitions with gfs2 init script - https://alteeve.ca/w/2-Node_Red_Hat_KVM_Cluster_Tutorial#Defining_The_Resources or even as simply as just enabling services such as clvm and gfs2 to start automatically at boot (http://pbraun.nethence.com/doc/filesystems/gfs2.html), like: chkconfig gfs2 on If I understand the latest approach correctly, such cluster only controls whether nodes are still alive and can fence errant ones, but such cluster has no control over the status of its resources. I have some experience with Pacemaker and I'm used to that all resources are controlled by a cluster and an action can be taken when not only there are connectivity issues, but any of the resources misbehave. So, which is the right way for me to go: leave GFS partition mounted (any reasons to do so?) set force_unmount="1". Won't this break anything? Why this is not the default? use script resource <script file="/etc/init.d/gfs2" name="gfs"/> to manage GFS partition. start it at boot and don't include in cluster.conf (any reasons to do so?) This may be a sort of question that cannot be answered unambiguously, so it would be also of much value for me if you shared your experience or expressed your thoughts on the issue. How does for example /etc/cluster/cluster.conf look like when configuring gfs with Conga or ccs (they are not available to me since for now I have to use Ubuntu for the cluster)? Thanks you very much!

    Read the article

  • Installing .NET Framework 4 Client Profile breaks Windows Update

    - by Richard
    I have a Samsung NC-10 netbook with a fresh install of Windows 7 Home Premium 32-bit (it only had 2GB). If Microsoft .NET Framework 4 Client Profile is installed on it, Windows Update will always return error code 8024402F ("Windows Update encountered an unknown error"). As soon as I uninstall it, Windows Update works just fine again. Out of the four computers in this house, only this netbook has the problem. My question is: How can I get the .NET Framework 4 Client Profile installed on my netbook and continue to have a functioning Windows Update? ----- More information ----- The hard-drive recently died on my netbook so I replaced it with a nice new SSD and did a fresh installation of Windows 7 Home Premium (SP1) - along with all the updates. At some point I found that, when I ran Windows Update, I was greeted with error code 8024402F ("Windows Update encountered an unknown error"). Looking in C:\Windows\WindowsUpdate.log, I saw the following issue: WARNING: ECP: Failed to validate cab file digest downloaded from http://download.windowsupdate.com/msdownload/update/software/dflt/2012/02/4913552_4a5c9563d1f58c77f30d0d5c9999e4b8bff3ab21.cab with error 0x80091007 WARNING: ECP: This roundtrip contained some optimized updates which failed. New Update count = 0, Old Count = 3 FATAL: ProcessCoreMetadata did not return any update to be committed WARNING: Sync of Updates: 0x8024402f WARNING: SyncServerUpdatesInternal failed: 0x8024402f When I downloaded the CAB from the URL listed and opened it, it contained a file called 4913552.txt. A search on Google suggested that it's related to Microsoft .NET Framework 4 Client Profile. Other people had reported problems with it breaking Windows Update, but they were running Windows XP. I tried the steps outlined on the Microsoft site for this error code, but it reported that there was nothing wrong. I also found this superuser question, I tried all the answers listed but none of them made any difference. My router doesn't block ActiveX, changing my internet settings in IE made no difference, assuming it was a corrupted update repository didn't do anything (except wipe my update history), my date and time was correct, switching to Google's DNS didn't work and neither did disabling IPv6. Figuring that this update was corrupted, I repaired it and nothing changed. In desperation I un-installed it and Windows Update started working again! Brilliant! I then downloaded the full version from the Microsoft website, installed it and, thankfully, Windows Update continued to work just fine. A week later I turn on my netbook and Windows Update is broken again with exactly the same error message and log entries as before. Repairing .NET Framework 4 Client Profile did nothing, removing it entirely solved the problem again. Thinking this might be some odd Windows installation issue, I formatted the hard-drive and re-installed Windows. Same problem as before - as soon as .NET Framework 4 Client Profile ended up on the netbook, Windows Update stopped working and reported error 8024402F. As soon as it was un-installed, everything worked just fine again. There are three other machines in this house and all of them have working Windows Update and this Client Profile. Does anyone know why it causes this netbook to break and, more importantly, how I can fix it?

    Read the article

< Previous Page | 457 458 459 460 461 462 463 464 465 466 467 468  | Next Page >