Search Results

Search found 18803 results on 753 pages for 'c link'.

Page 462/753 | < Previous Page | 458 459 460 461 462 463 464 465 466 467 468 469  | Next Page >

• Suspected power supply issue? PC repeatedly whirs for some seconds and then dies.

  - by benwebdev

  I've come home today and switched on the PC I've built a few months ago only for the machine to whir for a few short seconds and then die. It repeats this until I disconnect the power lead. Nothing is output to the screen and this cut out happens very quickly after switching it on. What could this be and how could it be fixed? Is it the power supply? I'm in despair :-( My spec is below, everything is new and was bought and assembled within the last 6months, system has been fantastic until now. Power Supply: 620W CoolerMaster Real Power M620 Motherboard: Gigabyte GA-X58A-UD3R Intel X58 (Socket 1366) DDR3 Processor: Intel Core i7 930 2.80GHz @ 4.00GHz RAM: 6GB DDR3 OS Windows 7 64bit Sapphire HD 5770 Vapor-X 1GB Graphics card 1TB Hitachi HDD 720GB Seagate Barracuda HDD 350GB Seagate Barracuda HDD EMu 0404 PCI Soundcard D-Link PCI-E wireless card Samsung DVD RW drive

  Read the article

• Is there an idiot's guide to software licensing somewhere?

  - by Karpie

  Basically, my knowledge on the issue is zilch other than the fact that open-source and closed-source exists. I'm a web developer (not a designer in the slightest), so I look online for things like icons. I've always been a big fan of these icons, which have a Creative Commons Attribution 2.5 License. As far as I can see, this license says 'do whatever you want with them as long as you have a link back to me somewhere'. Is that assumption correct? Just today I found a new icon set, with a much more confusing license (found here), and to be quite honest I have no idea if I'm allowed to use them or not. At the moment I want to just use them for toy stuff that might never see the light of day, but then my source code is stored on Github, is it legal to store the icons there where they're publicly accessible? If I put them on my personal website that might have ads on it to make me five cents every now and then, is that legal? If I use them on a site that offers a free service to users, is that legal? If that site then starts making money (via things like paid subscriptions) or gets bought out by someone (highly unlikely but one day possible) is that legal? Is there some noob guide out there that explains all this stuff, because I would hate to start using this sort of stuff now only to have to change it all later. Even if I buy the icons, there's still licensing issues that I don't understand! :( And this sort of stuff keeps popping up more and more often...

  Read the article

• Creating a server of an xp computer?

  - by Sweppi

  Hey, I want to create a server for my website since what I'm going to have on the website is far more than I can store web hotel. So I have this xp computer I'd like to use as a server. I did have a guide of this but unfortunately the link broke. But what i understood was that I'd be in need of a windows 2000 disc for this to work. Do you have any good tutorials/guides about how I can remake my xp computer to a server? The computer is running windows xp home edition Service Pack 2 Thank you in advance!

  Read the article

• How to secure Apache for shared hosting environment? (chrooting, avoid symlinking...)

  - by Alessio Periloso

  I'm having problems dealing with Apache configuration: the problem is that I want to limit each user to his own docroot (so, a chroot() would be what I'm looking for), but: Mod_chroot works only globally and not for each virtualhost: i have the users in a path like the following one /home/vhosts/xxxxx/domains/domain.tld/public_html (xxxxx is the user), and can't solve the problem chrooting /home/vhosts, because the users would still be allowed to see each other. Using apache-mod-itk would slow down the websites too much, and I'm not sure if it would solve anything Without using any of the previous two, I think the only thing left is avoiding symlinking, not allowing the users to link to something that doesn't belong to them. So, I think I'm going to follow the third point but... how to efficiently avoid symlinking while still keeping mod_rewrite working?! The php has already been chrooted with php-fpm, so my only concern is about Apache itself.

  Read the article

• How to map a VPN (tun0) network adapter on host Ubuntu to a VirtualBox guest Windows?

  - by Mashimom

  I have a Ubuntu 10.04 running Oracle VirtualBox 3.2.6 with a Windows XP guest. I use a VPN that I would like to be accessed by the guest VM, on a ifconfig it shows as: tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:5.192.10.99 P-t-P:5.192.10.99 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1362 Metric:1 RX packets:14151 errors:0 dropped:0 overruns:0 frame:0 TX packets:19860 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:4415271 (4.4 MB) TX bytes:17949982 (17.9 MB) Using NAT or Bridge adapters on the VM only gives me the non-vpn adapter. How can I map the tun0 adapter to VirtualBox?

  Read the article

• Ubuntu live cd : black screen and blinking cursor

  - by IFasel

  I try to install ubuntu 12.04 on my computer. I can get to the purple screen on the live cd but then, if I choose "Installing Ubuntu", I have a black screen with a cursor blinking (and nothing else happens). My PC : acer aspire M3920, CPU i5-2300, 8 Gb RAM, NVIDIA gt 405. What I already tried : I tried with 12.04 and 13.04 daily build I tried with a live usb and with a live dvd I tried the following boot options : nomodset, acpi=off I googled a lot and it seems that it could be a graphic card problem. Do you know any other boot options that I could try ? UPDATE This is not a duplicate : I've tried all the common boot options (nomodeset, noacpi...) and it doesn't change anything. With the option "no splash" (instead of "quiet splash"), I can see what happens before the forever-blinking cursor : [sdg] no caching mode present [sdg] assuming drive cache : write trough ata8.00: excetion Emask 0x52 ... frozen ata8 : SError : { RecovData RecovComm UnrecovData...} ata8.00 : failed command : IDENTIFY PACKET DEVICE ... ata8.00 : status : { DRDY } ata8 : hard resetting link Does somebody know what it means ? N.B. astonishingly, Puppy Linux boots fine (but Debian, Fedora and Ubuntu do not) Solution In fact, it was not a graphic card problem. I had to disconnect the dvd drive and connect it to another free sata connector (I don't really understand why Ubuntu had trouble with this connector and Windows 7 not). After that, everything worked fine.

  Read the article

• Awesome and LXDE desktop managers messed up KDE

  - by Caleb1994

  I saw a desktop manager named "Awesome" earlier on Google+, and thought I'd give it a try. In short, I didn't like it, but it got me wondering what other desktops were like, which I hadn't tried. The first one to come to mind was LXDE. I installed that, and tried it. I wasn't a big fan, so I just went to log back into KDE. Only, when I log in, everything is screwy. My theme is weird (although, according to system settings, it is still the same). All the categories and application short cuts in the KMenu are gone, except my favorites, which are now renamed with the "short name", it seems. I know these things are global resources, so it is very likely that one of these Window Managers screwed it up, but I need it fixed. Actually, it seems that after restarting the theme problem fixed itself, but the KMenu items disappearing is still a problem. Does anyone know where these items are stored? (I know they are are just .desktop files somewhere, IIRC, but I don't remember where they are usually stored so I can see if they are still there). I'm hoping it's just a matter of a broken link or something somewhere, not deleted shortcuts... :/ In summary: Any ideas on what caused this? Do you know how to fix the KMenu, or at least where the .desktop shortcuts are stored for the KMenu so I can see if they still exist (crosses fingers).

  Read the article

• OpenBSD Routing Problem

  - by Ozkan SENOVA

  I am running OpenBSD on a network appliance hardware. It has 5 NICs. I want to give different IP's in same subnet to 3 nics. Eg: em0: 192.168.1.5 em1: 192.168.1.90 em2: 192.168.1.56 I make the necessary configuration with ifconfig, all interfaces works as expected when all the ethernet ports are plugged in to switch. But there is something wrong in routing. If I connect to 192.16.1.5 via any service(http, smtp etc.), traffic goes over link#3. If I unpug the cable from em2 I can't reach any IP's binded on device. Is there any way to route traffic over different links in this IP configuration?

  Read the article

• Integrated Reporting Is Getting Closer

  - by Evelyn Neumayr

  By John O’Rourke, Vice President, Product Marketing, Oracle Oracle recently sponsored a webcast on CFO.com titled:  The CFO Playbook on Integrated Reporting: Integrating Sustainability into Financial Disclosures which focused on why top companies in the U.S. and overseas are incorporating sustainability content into their annual reports and other financial disclosures.  The webcast speakers, James Margolis, partner with Environmental Resources Management (ERM), a global provider of environmental, health, safety, risk and sustainability consulting services (EHSS) and Mike Wallace, Director of the Global Reporting Initiative's Focal Point USA, discussed the benefits of integrating sustainability reporting with traditional financial reporting. They noted how investors, corporate directors, lenders and most recently, the Securities and Exchange Commission, use this information to better understand, benchmark and value companies. They also talked about the November 2012 release of an Integrated Reporting Framework by the International Integrated Reporting Council (IIRC).  Read the press release and link to the framework here.  The shift towards integrated financial and sustainability reporting is gaining momentum with a number of global stock exchanges endorsing this approach in 2012.  Visit these links to listen to the webcast and download the slides. You can also view a demonstration of Oracle's solution for integrated financial and sustainability reporting. If you’re interested in learning more about this and Oracle’s other sustainability reporting solutions, click here. If you have any questions or need additional information, please feel free to contact me at [email protected].

  Read the article

• Creating encrypted database for work

  - by Baldur

  My boss posed this problem to me: Encrypted: We need an encrypted database for miscellanious passwords we use at work that are currently only in people's head. Easily accessable: Someone needs to be able to quickly access specific passwords, possibly at hectic moments. This requires any sort of public key management (keeping it on a USB key in a sealed envelope?) to be relatively easy. Access control: The system should have groups of passwords where only specific people have access to specific groups. Recoverability: We need to make sure passwords from one group aren't lost even if the only users with direct access quit or pass away—hence we need some way where (for example) any two members of senior management may override the system (see the treshold link below) and retrieve all the passwords with their key. The first thing that jumped into my mind was some form of threshold and asymmetric cryptography but I don't want to reinvent the wheel, are there any solutions for this? Any software should preferrably be free and open-source.

  Read the article

• java for freebsd

  - by rawman

  I am trying to install java on freebsd 7.X and i have done following thing so far download the tar file from this link and store the file in cd /usr/ports/distfiles/ after that i run cd /usr/ports/java/diablo-jre16 or cd /usr/ports/java/diablo-jdk16 make config install clean and uncheck all the options in config screen now after doing all this now i am getting following message to indicate for amd version even if my server is using intel Core2Quad Q9550 2.83 GHz mail# make install === Vulnerability check disabled, database not found === License check disabled, port has not defined LICENSE === Found saved configuration for diablo-jdk-1.6.0.07.02_12 Because of licensing restrictions, you must fetch the distribution manually. Please access http://www.FreeBSDFoundation.org/cgi-bin/download?download=diablo-caffe-freebsd7-amd64-1.6.0_07-b02.tar.bz2 with a web browser and "Accept" the End User License Agreement for "Caffe Diablo 1.6.0". Please place the downloaded file(s) in /usr/ports/distfiles. * Error code 1 Stop in /usr/ports/java/diablo-jdk16. mail# (as before i was getting error for tzupdater so i downloaded tzupdater-1_3_29-2010f.zip and put it in a cd /usr/ports/distfiles/ folder)

  Read the article

• Domain only responding to certain locations?

  - by CuriosityHosting

  I have a client who's been having problems with his site. The server doesn't seem to want to load hes site in certain countries, though other sites are fine. But this site [link removed] only seems to load in the US and Canada. In Europe, the UK, Asia etc, the site seems to be blocked (been like this for a week now). I've looked over the server and it seems fine. Other sites work fine, and the NS are set up properly, pointing to my main server, at http://puu.sh/MIGF Any ideas?

  Read the article

• Psexec issue when running an application on a Windows Server 2008 R2 machine from a 2003 R2 machine

  - by Vermin

  I am trying to run an application on a Windows Server 2008 R2 machine from a Windows Server 2003 R2 machine using a batch file with the following line of code in a batch file: psexec \\nightmachine -u DOMAIN\User -p Password -i "C:\FilePath\Application.exe" argument1 argument2 The application fails to run correctly when started using psexec, but the application will run correctly if I have logged into the nightmachine with the same user and started it from its file path via cmd. I have been able to get hold of the error returned in the application from its log and the exception returned is the following: System.DllNotFoundException: Unable to load DLL 'rasapi32.dll': A dynamic link library (DLL) initialization routine failed. (Exception from HRESULT: 0x8007045A) After searching for that error code on the net, there are a lot of posts saying that this is caused by file corruption, but I cant see why that would be the case as the application will run normally when not being run from psexec. (the user is an administrator on both machines) Can anyone please help me on this? If any more information is needed to help solve this issue then please ask and I will do my best to post it.

  Read the article

• How to limit router bandwidth?

  - by David

  Hello, Is there a way to configure my (D-Link DIR-615) router to throttle down the allowed bandwidth after a certain amount of bandwidth has been used? For instance, I want my router to operate normally up to 20GB. After 20GB I want the router to limit bandwidth to a fraction of the normal speed (perhaps 1/5th). I live in Canada, so in about a month, everyone is going to be billed based on the amount they used (usage based billing). Instead of the unlimited bandwidth that I am enjoying now, most people will be capped at 25GB and will have to fork out $2/GB of over usage. Thank you in advance for the help.

  Read the article

• Prevent Chrome from automatically opening downloaded PDF and Image files

  - by Phoenix

  When I download a PDF or image in Google Chrome on my Mac, is it possible to prevent Chrome from automatically opening it in my default application for that file type (e.g., Preview)? I notice that Chrome does not do this for other downloaded files such as audio and ZIP archives. I still want to be able to preview files in Chrome; I just want to prevent it from automatically launching my image/PDF viewer application after I download them. For example: I click on a link in an email to a PDF document or an image file. Chrome displays the contents in the browser. I press Cmd-S and save the file to my computer. When the download finishes, the file opens automatically in Preview.app. It's that last step that I would like to bypass.

  Read the article

• How can I get rid of the long Google results URLs?

  - by Teifi

  google.com is always shielded by our firewall. When I search something at google.com, a result list appears. Then I click the link, the URL changes to a processed url like: http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&ved=0CDcQFjAA&url=http%3A%2F%2Fwww.amazon.com%2F&ei=PE_AUMLmFKW9iAfrl4HoCQ&usg=AFQjCNGcA9BfTgNdpb6LfcoG0sjA7hNW6A&cad=rjt Then my browser is blocked because of google.com I guess. The only useful information in that long like processed URL is http%3A%2F%2Fwww.amazon.com(http://www.amazon.com). My quesitons: What's the meaning of that long like processed URL? Is there a way to remove the header google.com/url?sa.. each time I click the search results?

  Read the article

• Developing an iOS app for a single device - licensing issue

  - by bfavaretto

  I'm developing an iOS app for a museum as a freelancer. It's a very simple video player, to be installed on a single iPad that will be part of a permanent exhibition, basically acting as a kiosk. It turns out the iPad is the ideal device for that if you're looking for a small and affordable touchscreen. The problem is: as far as I can tell, none of the Apple Developer Program options available will allow me to distribute an app like that. The relevant options are (from the link above): iOS Developer Program ($99/year) Select this program if you would like to distribute apps on the App Store as an individual, sole proprietor, company, organization, government entity or educational institution. iOS Developer Enterprise Program ($299/year) Select this program if you would like to develop proprietary apps for internal distribution within your company, organization, government entity or educational institution. The regular program requires distribution through the App Store. The Enterprise version is for internal distribution within my own organization. Neither is the case here! It seems like I'm doomed to violate Apple's terms of service (and I can think of at least two ways of doing that: jailbreaking, or changing the iPad's date so it won't know the provisioning profile expired). Is that really so, or did I get the descriptions wrong? Has anyone here been in a similar situation?

  Read the article

• why Apache with ssl but back end weblogic without ssl works?

  - by huangli

      Hello everyone. my question is very simple . The link below is a picture about my architecture. https://docs.google.com/open?id=0BxSXbpgYIZVOR212RVk4ZDN1Sm8.      The pic above shows the architecture right now and it works correctly ! which means I could visit apache with url https//apchehost:8080, could not visit the web app with https served by weblogic but I could visit these app with https served by Apache(Apache is proxy server).      My question is why the Apache is configured with ssl but weblogic without ssl works ? I think weblogic should also configured with ssl . If this works , what about security level ? Is the ssl really works if only Apache configured with ssl but Weblogic without it ? Thanks . condition: Apache 2.2.17 with weblogic module mod_wl_22.so Weblogic: 10.3 OS: Windows server 2003

  Read the article

• What could have caused a large traffic drop from Google in early May?

  - by Scott Schluer

  I have a website (www.equispot.com) that has been indexed for almost 2 years in Google. I managed to get myself on the first page (average position 6-8) on Google for my target keyword of "horses for sale" and held there pretty solidly for months. Suddenly, with no changes to the site, traffic from Google dropped like a rock in early May. I slowly fell in position until now I'm sitting at the bottom of page 4. I have never hired an SEO firm, have not used any "black hat" techniques that Google would have penalized me for in their May update, etc. I'm not familiar enough with SEO to know how to look at link profiles, etc. to tell if there's something wrong. I've run my site through a DNS checker and it came back with no errors. Google Webmaster Tools shows no messages or notices of any kind, just a drop in traffic. GWT also shows only 2 server errors and 1 404. Is there anyone who can tell me by quickly checking my domain if there's an obvious reason that my traffic would have fallen so far, something that I can fix?

  Read the article

• What could be the maximum number of hosts on a 100BaseTX ethernet network ?

  - by snowflake

  Hello, I'm having two ip networks (192.168.1.x and 192.168.2.x) bridged on a server, but all hosts (fixed IPs) are on the same physical 100BaseTX ethernet (with a daisy chain of 48ports switchs). Often, I loose link between the server and hosts of the second network. Usually if I reboot the host, the connection work again, and if I force connection to be active, the connection keep alive until I ping after a while without active connection. I'm wondering how many hosts can be connected on the same network without troubles, and eventually how many switches can be daisy chained ? I suppose maximum length between hosts to be 100meters to the hub or 200meters between extremity of the network. Somebody is suggesting 8 switches here : http://www.tek-tips.com/viewthread.cfm?qid=1137879&page=12 Any comments on how to find a solution to the problem and not answering directly to the question are welcomed!

  Read the article

• How do I bridge a connection from Wi-Fi to TAP on Mac OS X? (for the emulator QEMU)

  - by penx

  I'm trying to setup a bridge between my Wi-Fi connection and an emulator (QEMU). I need a virtual machine to be on the same LAN as the host, with its own IP address. QEMU requires using a TAP (virtual network device) so I have installed tuntaposx, have it running, and can open up QEMU using a TAP: qemu-system-arm -kernel zImage.integrator -initrd arm_root.img -m 256 -net nic -net tap,ifname=tap1 -nographic -append "console=ttyAMA0" I have a script that configures the bridge once QEMU has opened up the TAP interface: sysctl -w net.link.ether.inet.proxyall=1 sysctl -w net.inet.ip.forwarding=1 sysctl -w net.inet.ip.fw.enable=1 ifconfig bridge0 create ifconfig bridge0 addm en1 ifconfig tap1 0.0.0.0 up ifconfig bridge0 addm tap1 ifconfig bridge0 up If I manually set an IP on the VM, I can ping from the VM to the host, but not from the host to the VM. Also, I can't access the rest of the network from the VM - including not being able to set an IP over DHCP. Any ideas?

  Read the article

• DVD wont mount Ubuntu 12.04

  - by CyborgGold

  I can't seem to be able to mount my optical drive. I have tried numerous solutions from this site with no results. I am not able to see the device inside the file browser either. There is a DVD in the drive. I am running 12.04 on an HP g60-235dx portable. I have a link below to the specs. I will also list what I have tried (that I can find back right now.) I know the drive is functioning, because just before Windows 7 crashed and my MBR went fubar I was watching movies just fine. I am fairly new to linux, so don't assume I know anything. Ok, so here is what I have tried: sudo wget --output-document=/etc/apt/sources.list.d/medibuntu.list http://www.medibuntu.org/sources.list.d/$(lsb_release -cs).list sudo apt-get --quiet update sudo apt-get --yes --quiet --allow-unauthenticated install medibuntu-keyring sudo apt-get --quiet update sudo apt-get install libdvdcss2 dmesg | grep sr0 (no output) apt-get install libdvdnav4 (already installed, and up to date) sudo /usr/share/doc/libdvdread4/install-css.sh ls -l /dev/cdrom /dev/cdrw /dev/dvd /dev/dvdrw /dev/scd0 /dev/sr0 ls: cannot access /dev/scd0: No such file or directory lrwxrwxrwx 1 root root 3 Sep 10 03:51 /dev/cdrom -> sr0 lrwxrwxrwx 1 root root 3 Sep 10 03:51 /dev/cdrw -> sr0 lrwxrwxrwx 1 root root 3 Sep 10 03:51 /dev/dvd -> sr0 lrwxrwxrwx 1 root root 3 Sep 10 03:51 /dev/dvdrw -> sr0 brw-rw----+ 1 root cdrom 11, 0 Sep 10 03:51 /dev/sr0 wodim --devices wodim: Overview of accessible drives (1 found) : ------------------------------------------------------------------------- 0 dev='/dev/sg1' rwrw-- : 'TSSTcorp' 'CDDVDW TS-L633M' ------------------------------------------------------------------------- sudo lshw optical *-cdrom description: DVD-RAM writer product: CDDVDW TS-L633M vendor: TSSTcorp physical id: 1 bus info: scsi@1:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/sr0 version: 0200 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc sudo lshw | grep cdrom *-cdrom logical name: /dev/cdrom Spec sheet for portable: http://www.cnet.com/laptops/hp-g60-235dx/4507-3121_7-33496192.html If you need any more information than all of that... please let me know.

  Read the article

• Complex shading using one single (small) texture

  - by teodron

  Recently I stumbled upon a demo reel in UDK about how one can attain beautiful results using just one (rather tiny) texture that's being sent to the shader pipeline. The famous link is this one. Basically, the author states that they've used just one texture and give a snapshot of the technique here. I see that every RGBA channel contains different grayscale information.. and that info could be used to inside a shader to obtain a colour blended output. The problem is that the reel displays a fairly complex scene. To top that, the author even makes use of a normal map. How did they manage to fit a normal map in an already cluttered texture? It makes sense to have a half-space normal map by using only RG from an RGB texture, but what about the rest of the information? Since it was proven to be possible, could someone please explain how it was done (the big picture, not the dirty details!)!? Here's the texture being used. Click to see in full size.

  Read the article

• I get a 403 when requesting a JS file from CloudFront

  - by Roland

  This is new to me so please excuse me if I have no idea what I'm talking about (: I'm trying to set up my own CDN with CloudFront and S3 through a subdomain by adding a CNAME to that subdomain to point to the CloudFront. It seems like I get a 403 when trying to load the file, this is the original s3 link : https://s3.amazonaws.com/chaoscod3r_aws_cdn/libs/polyfills/json3_polyfill.js ; which seems to be working after setting the permission to everyone to open / download. But when trying to use the subdomain to request the file : http://cdn.chaoscod3r.com/libs/polyfills/json3_polyfill.js ; it seems like I get that 403. Could anyone help me out with this one ?

  Read the article

• How to edit the list of files to download in a .torrent file?

  - by Forbidden Overseer

  I have a torrent that contains many files in it, but I don't want to download all of them because I need only few files among them. I am not downloading from a torrent client, but I am actually using put.io service that converts torrents into direct downloads for me. I want to edit the .torrent file (or magnet link) in such a way that I get only those files which I need from the torrent. I tried by editing with text editors, but I am getting some crazy hash errors when I did that. I have seen people editing trackers in a torrent file (using online editors and other editors), but none of them edited the list of files in the torrent file. So, the question is: How to edit a .torrent file (and save it back as another .torrent file) such that when you run that torrent file, it only downloads only those files you need?

  Read the article

< Previous Page | 458 459 460 461 462 463 464 465 466 467 468 469  | Next Page >