Search Results

Search found 12909 results on 517 pages for 'domain'.

Page 462/517 | < Previous Page | 458 459 460 461 462 463 464 465 466 467 468 469  | Next Page >

• Windows Server 2003 (w/Exchange) move to new machine

  - by James Booker

  I have an ageing domain controller (the only one on a 10-pc network) which needs rebooting often. I have a Dell Poweredge 2850 server doing nothing, so I'd like to move the DC to that, but here's the catch - I don't have Win2k Server Std install media any more as it's been lost. I purchased "Easus Todo Backup Advanced Server" which claims to be able to recover to dissimilar metal, but it's not quite working (although I don't think it's the product's fault) I know the server and PERC RAID card are good because I installed Ubuntu on the logical drive (4 x 72GB disks RAID 5) no problems. I've booted frmo the Easus Todo backup CD (which is WinPE based) and recovered to the logical disk on the RAID (after installing driver inside the WinPE environment from a NAS drive) The problem is when I boot the server, I can get the OS selection menu, but any option results in a blank screen, with no errors. I figure this is probably because the driver wasn't installed on the old machine (which is IDE-based (i know, i know!) and doesn;t have a RAID controller) I've booted from the CD and copied the mraid35x.sys file to the c:\windows\system32\drivers folder on the recovered system, but it makes no difference. I made a boot.ini with rdisks 0-10 defined, and booting from each of these resulted in a file error (i.e. 'this isn't a real disk') - the only disk that gets any response (the blank screen) is multi(0)disk(0)rdisk(0)partition(1) which just gives me the blank black screen and no disk activity. Is there any way I can force the drvier to be installed on the source system (so i can do a full backup again), i've tried right-clicking the oemsetup.inf and clicking install, but it didn't actually do anything. I attempted to force it with the 'Add new hardware' wizard and forcing with the 'have disk' option but it still gave me no hardware to select. Also I've got an identical machine running WinXP which uses the PERC driver successfully (which was obviously done at install time) and the boot.ini settings are the same : multi(0)disk(0)rdisk(0)partition(1) Any ideas would be appreciated.

  Read the article

• Is there anything like Heroku for PHP and/or .NET?

  - by Wayne M

  In my area PHP is very widespread, so is .NET. Ruby not so much; most places have never heard of it. For some personal things I am "forced" to choose Rails because I want to take advantage of Heroku - the ability to deploy and scale on the cloud very easily is the main reason. Also, they offer a small FREE plan, with no ads or strings attached, that I can use for demo sites or, in this case, for my business' static page; as a totally bootstrapped startup I have maybe $50 or so in initial capital and cannot afford to pay monthly fees while I'm getting started. Are there any similar offerings for other languages? Specifically, I really like the small, 5MB site for free that Heroku offers - is there anything like that for PHP and/or .NET? I'm not even that concerned about the "cloud" part, but that would be a nice bonus. If there is, I might be able to kill two birds with one stone and pick up a useful skill as I'm doing my own thing instead of using something that nobody else knows or cares about. I should add I'm specifically interested in something that offers a free plan. As I said, Heroku has a 5mb plan that you can have as many as you want for free; I have yet to find anything similar for any other platform (most of the "free" sites require you to have ugly banners on your page, or don't allow you to use your own domain name), and to be honest I'm not too thrilled about using Ruby on Rails for everything simply to take advantage of this. I'm asking this here because I already asked it on StackOverflow and someone suggested it would be better suited here.

  Read the article

• nginx reverse proxy slows down my throughput by half

  - by Isaac A Mosquera

  I'm currently using nginx to proxy back to gunicorn with 8 workers. I'm using an amazon extra large instance with 4 virtual cores. When I connect to gunicorn directly I get about 10K requests/sec. When I serve a static file from nginx I get about 25 requests/sec. But when I place gunicorn behind nginx on the same physical server I get about 5K requests/sec. I understand there will be some latency from nginx, but I think there might be a problem since it's a 50% drops. Anybody heard of something similar? any help would be great! Here is the relevant nginx conf: worker_processes 4; worker_rlimit_nofile 30000; events { worker_connections 5120; } http { sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 65; types_hash_max_size 2048; } sites-enabled/default: upstream backend { server 127.0.0.1:8000; } server { server_name api.domain.com ; location / { proxy_pass http://backend; proxy_buffering off; } }

  Read the article

• nginx configuration file explained

  - by Chris Muench

  I have a few questions about this configuration file "default" in /etc/nginx/sites-enabled. It is shown below. server { root /usr/share/nginx/www; index index.html index.htm; # Make site accessible from http://localhost/ server_name localhost; location / { proxy_pass http://127.0.0.1:8080; } location /doc { root /usr/share; autoindex on; allow 127.0.0.1; deny all; } location /images { root /usr/share; autoindex off; } } There is no "Listen" directive, how does it know to default to 80 The server_name is localhost, how does another domain work? Why is the location directive embedded in the server directive? Does that mean these locations ONLY apply to this server? None of my configs have listen 80 default_server; how does nginx then pick what configuration to use?

  Read the article

• error while resolving DNS requires

  - by user2803887

  I followed this document to configure master-slave powerdns servers... http://linuxmanage.com/master-slave-powerdns-managed-by-poweradmin.html Installation completed perfectly no errors even I feel DNS is trying to resolve some queries and parameter.. but while going through intodns.com i get below error for domain names which i have created in powerdns name server installed as above guide. Error Mismatched NS records WARNING: One or more of your nameservers did not return any of your NS records. Error Multiple Nameservers ERROR: Looks like you have less than 2 nameservers. According to RFC2182 section 5 you must have at least 3 nameservers, and no more than 7. Having 2 nameservers is also ok by me. Error Missing nameservers You should already know that your NS records at your reported by your nameservers are missing, so here it is again: nameservers ns1.makeittiny.com. ns2.makeittiny.com. I am much new to powerdns so not able to figure out where problem.. i check all things but not able to make out where problem remains.

  Read the article

• Trouble with Remote Desktop pulling through printers. Drive Redirection works, and the ports created but not the printers

  - by Windex

  I've run out of things to look into. All the support documents have been gone through and still provide no resolution. I've checked the service permissions, (sc sdshow spooler) they all match up with other systems and what is output on the support documents. I'm nearly positive that the issue can't be permissions anyway as the software requires all users to be an administrator, so all users are a local administrator. (I haven't looked into why yet but its on the list, I was just recently brought into this team and we've put procedures in place for quick recovery.) We've applied hot fixes relating to RDS and printing, though I'm not sure which ones they were. I've combed through group policy and no where is printer redirection disabled. It's setup with all default values regarding the use and redirection of printers and a quick install of W2k8 R2 shows that it works by default. This dev install was joined to the same domain, placed in the same OU, shows the same policies applied, etc, etc, etc, The server generates all the correct redirected ports but no printers are created. It will also redirect drives without issue, this would seem to rule out the usermode service that handles redirects being broken. No events are logged related to any of the events and there are no events from the TerminalServices-Printer source. There were local printers setup. I didn't think it would mattter but as I was running out of ideas I tried deleting them all with no change. The TS was configured for the software it will be running before we checked out the redirection of printers so the other team responsible to setting up new servers wants to find a fix instead of reloading a new server. I'm not sure where or what else to look for. Any ideas?

  Read the article

• Exchange 2013 really slow outside of localhost

  - by ItsJustJP

  We've got a 12 core xeon, 24GB of ram 2012 server. We've recently migrated from exchange 2010 (which was on another server) to exchange 2013 which resides on our new 12 core server. Accessing the OWA on the exchange server is fine; it's very quick and responsive however accessing it via any other computer connect to the domain via a 1 gpbs connection and it'll take 10-15 seconds to load. Also running slow is public calenders that people in my place need to access, again taking 10-15 seconds to access and can sometimes cause outlook to not respond. Further to that we have phones that connect via the internet (of course) to the exchange so people can get work emails when they are out of the office. Guess what, this is also running slow. I've have search for many solutions and have tried changing outlook authentication methods but there is no change in speed. The old exchange 2010 server no longer exists but there was no problem before the migration. Has anyone got any suggestions? Thanks :) Must also mention that server 2012 that exchange 2013 is installed on is also the DC. Update: It would appear that any connection via https is slow. It took more than 15 mins for an outlook client to download 50MB of emails (outlook anywhere).

  Read the article

• Static DHCP binding

  - by Alex

  Good time of day, SF people. I have created a manual DHCP binding entry on a Cisco router so that a client would always get leased to it. The clients wants to get the same address on both of his dual-boot linux systems. He tries to get an IP address leased and he succeeds on one of the dual-boot operating systems. When he reboots to another one he gets a lease for a completely different one. I don't get it. The MAC addresses are the same (we checked in ifconfig, so what could be happening here? Why is the router confused? Or is it something else? Also, how can I check DHCP server IP address who I have got an IP address from (on Linux)? Configuration on Cisco: ip dhcp pool MANUAL_BINDING0001 host 192.168.0.64 255.255.255.0 hardware-address dead.beef.1337 dns-server 192.168.8.11 default-router 192.168.0.254 domain-name verynicedomainigothere.cn PS. Is it mandatory to use client-name configuration line?

  Read the article

• Log Problem and bash script

  - by GvWorker

  Hello Guys, I have 11 Debian servers running on rackspace cloud hosting. All running VHCS2 for hosting management. 1 server is used for application and 10 are used for only smtp. My question is regarding smtp servers. Each server hosted 1 domain. My problem is when my client use smtp there's a log created in this directory /var/log/ but within 24 hours drives are full and server refuse all smtp connections. Then I deleted the logs and ran following command to check the disk space. df -h but it shows hdd still full and server is still refusing the smtp connections. Then I ran following command to see the truth du --max-depth=1 -h It shows the truth. The real disk space used. Then I rebooted the server and now server working fine. But after few hours same situation happened. Then I created the following script. #!/bin/sh rm -fr /var/log/* rm -fr /var/log/apache2/*.log rm -fr /var/log/apache2/*.log.* rm -fr /var/log/apache2/users/* rm -fr /var/log/apache2/backup/* reboot It worked for days but after that logs are again filling the hdd. Now I want the following solutions. If anybody can help me. When I delete files from server hdd will free up without rebooting Log should be in specific range. Like a specific size of file where old data overwrite with new data

  Read the article

• IPtables and Remote Desktop with Proxy

  - by Sebastian

  So I setup a windows 2008 web server R2 on VirtualBox. Currently using Bridged Network. I can remote desktop to the machine hosting the VM (10.0.0.183) but cannot remote desktop to the VM itself (10.0.0.195). The remote port on the VM set to 5003. VM setup to accept remote connections (windows side). We also use a proxy for our internet, and I added these rules under NAT. (centOS 5) on our proxy box. -A INPUT -p tcp --dport 3389 -j ACCEPT -A REROUTING -i ppp0 -p tcp --dport 3389 -j REDIRECT --to-port 5003 -A FORWARD -d 10.0.0.195 --dport 5003 -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT I've been trying for hours and hours and just cannot get it to work. I also used freedns so that we can use a domain name to connect too this VM over the internet. (the DNS points to our external IP address). If we don't get this right we will have to purchase a PPoE from an ISP to connect to this VM remotely, but I know that there is an alternative route if I can just get this port forwarding right!

  Read the article

• Cannot connect to my VPN Server from another network

  - by SantaC

  ok here is the deal. I have a Windows 2008 R2 server with RRAS installed configured for VPN. I also have DHCP running. On my DC I have AD running and they're connected with my domain. I am only using one NIC though. As a client I have Windows 7. So I tried connecting to my VPN server through my own network, which worked fine, so the setup is correct. However, when I tried connecting to my VPN server on another network, it does not work. I went to my brothers home and tried connecting to my server but it did not pass. So on my VPN server I have ip: 192.168.2.99 At my brothers house, i did the configuration on his windows 7 and it cannot connect to that ip. I am operating on the 192.168.2.1 network and he is operating on the 192.168.0.1 network. So how do I configure his client in order to get it to work? I tried changing his ip to the 192.168.2.x network, but i am not sure you can do that. I need some help here what to do.

  Read the article

• Strange issue in header location redirect

  - by hd01

  I have three websites hosted (example1.com, example2.com, example3.com) on a server. There is a page (test.php) on example1.com with just code below inside it: <?php header('Location:http://example2.com/a.php'); ?> When I browse test.php it goes to http://example1.com/a.php . it doesn't understand it is another domain url, it tried to find the page on itself. but when I put http://google.com instead of example2.com/a.php it works correct. I really get confused. What is the problem ? Should I set some configuration on the server? ( I am administrator of the hosting server ). Ps. The server is behind a pound server. Here's the Firebug Net output for example1.com/test.php Response Headers: HTTP/1.1 302 Found Date: Tue, 09 Oct 2012 09:03:34 GMT Server: Apache/2.2.16 (Debian) Location: http://example1.com/a.php Vary: Accept-Encoding Content-Encoding: gzip Content-Length: 21 Keep-Alive: timeout=15, max=100 Connection: Keep-Alive Content-Type: text/html; charset=utf-8 Request Headers: Accept text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Encoding gzip, deflate Accept-Language en-us,en;q=0.5 Connection keep-alive Cookie mycookie Host example1.com User-Agent Mozilla/5.0 (X11; Linux i686; rv:14.0) Gecko/20100101 Firefox/14.0.1

  Read the article

• (Some) security perms in WinXP corrupted (shows GUID instead of username)

  - by Andy

  I've been using my Win XP machine (part of a domain) over the holiday period, so until yesterday it hadn't rebooted for about five days. I used it yesterday perfectly fine and shut it down. When I switched it on this morning the majority (but not all) of my shortcut links in the Quick Launch toolbar showed as generic file icons. If you open the folder and get properties on one of the failing shortcuts it says ''Target type: This is not a valid shortcut''. Then in Outlook I noticed my signature wasn't showing (I checked my sent folder and the sig was ok yesterday). Checking the signature folder, I can't see the security tab on any of the sig files, and I have an access denied message on trying to open them. I can see the security tab on the signature folder itself, just none of the contents. If I try and use the parent folder's security tab and ''Replace permission entries on all child objects with entries shown here that apply to child objects'' it appears to work fine, but makes no actual difference. I logged in as administrator and saw that the owner of the files showed up as a GUID (clearly should've been my account in its place). Any ideas what might have made that happen? So far I haven't heard any similar complaints from anyone else at the office...

  Read the article

• How does everyone set up AWS for PHP with a git workflow while worrying about distributing EC2?

  - by Parris

  Hello, I have been looking for something like heroku but for php, and after much frustration (and almost finding what I need, but not quite) we decided to just go with AWS without any other abstraction. We are using PHP 5.3 (and CakePHP 1.3), and are currently using git. Ubuntu seems like the easiest way to get both of those on there and we will most likely use that. We aren't really going worry about outgoing email. We are using smtp through gmail, but will most likely switch to some other service eventually. I had 3 questions: 1) I have been looking at Zend Server, and I am not quite sure how that is more beneficial than xampp. Perhaps it is not? 2) I suppose to make the application scale we would need multiple instances of some ec2 ami. Then just duplicate it and such. The question then becomes how do we make sure all EC2 instances are up to date? 3) I understand the concept of load balancing to some degree. I understand that in 1 region you select a bunch of servers and have it load balance across them. The question then becomes well how about world wide? How do I make it so that traffic is directed to the correct ec2 server? I have heard of route 53, and tried signing up for that, but nothing appears in my control panel. Also perhaps it is just a DNS thing with my domain registrar? AHHH... some tutorial would be helpful!

  Read the article

• Cloned Centos 6.4 websrver for test purpose. Virtual host, .htaccess, redirecting url issue

  - by Shogoot

  I see similar questions, but not my exact challenge. What I have done so far I cloned a prod server over to a vmware to use it as a test server for new functionality I'm going to write. I'm not a sysadmin by trade, but I'm new to this company and I have to do some thing that are outside of my comfort zone (thats a good thing :) ) The prod server has 2 sites on it s1.com and s2.com. In /html/s1/, /html/s2/ there's an .htaccess file under each s*/. Looking like this: RewriteEngine ON RewriteBase / RewriteCond %{QUERY_STRING} id=([0-9]+) RewriteRule ^.* %1.htm RewriteCond %{QUERY_STRING} page=modules/checkout RewriteRule ^.* order.php RewriteCond %{QUERY_STRING} page=pages/sidekart RewriteRule ^.* pages/sidekart.htm The issue is that s1 has a lot of pages that really belongs under a third domain s3, the rule in line 4 and 5 redirects them to /html/s1/. An example of such URL is: s3.com/?page=modules/product&id=521614 I'm trying then to get those URLs (without modifying the URL) to redirect to s3's /html/s3/ server structure, which I set up making a new virtualhost s3 in test servers httpd.conf with a test3.com as servername and changing the other sites to tests1.com and tests2.com, and adding .htaccess also to this s3 root directory, and making a html/s3/ directory structure I populated with an index.html, etc. But, when I take the same URL (s3.com/?page=modules/product&id=521614) changing it to tests3.com/?page=modules/product&id=521614, I get s1's index page showing up in my browser. I've poked around about a day now and i cant figure out why this happens.

  Read the article

• SSL certificates: how to use it?

  - by Rod

  I have a central server and I want to purchase a SSL certificate for it. The architecture is based on this central server and many connected web-servers which are on the client-side (one for each user). A client could access both the main server and its local server. Moreover the two servers exchange data between them. I would like client's web browser to trust all servers and always activating https and a secure connection when connecting to them. Assuming I can name all servers on the same domain name (I was thinking about a wildcard certificate anyway), which kind of certificate or use of it can make these secure connections working? There is the possibility that main server and client side server are not connected for a while. Is possible to activate an https connection for a client to its local server in this case? When I will need to renew or change the certificate, I would like to change it just on the main server avoiding to have the need of touch all the servers on the side of clients. Can I do that in some way?

  Read the article

• Join multiple consecutive SQLite database dump files into 1 common database? Purpose: Search through ENTIRE Chrome Browsing History

  - by porg

  Google Chrome 's default web browsing history search engine only lets you access the records of the recent 100 days. Nevertheless in your application data, Chrome keeps your entire browsing history in SQLite database files, with the file naming scheme of "History Index YYYY-MM". I am looking for a way to search… …through my entire browsing history, …with sophisticated filters (limit search terms to certain fields such as URL, domain, title, body text; wildcard or regex terms, date ranges). … in … …either some ready-made software. eHistory came close, as it can limit terms to fields, but it lacks wildcards/regexes, and has the same limited time horizon as the default search. Beyond that, I could not find any suited Chrome extension or standalone (Mac) app. …or a command line to join multiple SQLite database files into one database, which I can then query (with the full syntax power). In the spirit of the pseudo code below: Preferred this way: sqlite --targetDatabase ChromeHistoryAll --importFiles /path/to/ChromeAppData/History\ Index* --importOnlyYetUnknownFiles Or if my desired feature --importOnlyYetUnknownFiles is not possible (feature could also be called "avoid duplicate imports by checking UIDs"), then by explicitly only importing files, of which I know, that they have yet not been imported into the ChromeHistoryAll database: cd ChromeAppData; sqlite --databaseTarget ChromeHistoryAll --importFiles YetNotImported1 YetNotImported2 YetNotImported3 All my queries I would then perform in the database "ChromeHistoryAll" P.S.: Additional question of general interest: Is there a way to perform a database query in a temporary database which was created on-the-fly from multiple files? Like: sqlite --query="SQL query" --targetDatabase DbAll --DBtemporaryInRAM --importFiles db1 db2 db3 This is surely not applicable for my Chrome question, as these History Index files have a combined file size of 500MB together, thus such a query would be of bad performance. But it could come handy in other situations.

  Read the article

• Apache forwarding without redirecting (application won't follow redirects)

  - by DrewVS

  Recently we had to move /task to /public/task, and I'd like to configure Apache to redirect accordingly. However, using mod_rewrite, though it works in the browser, seems to break applications making api calls to the above location. What happens is the application returns a page with the message saying the page was moved, but the app doesn't follow the redirect. So, is there a way to simply forward any traffic to /task to /public/task without 'redirecting', i.e, returning a redirect status code? EDIT: Here's a little more information. I've found a simple test to clarify what I'm trying to fix. Here is the URL path that needs forwarding: https://mydomain.com/task Needs to go to: https://mydomain.com/public/task If I use curl against the original domain, it just returns a redirect page notice. If I add the -L flag, which tells curl to follow redirects, it then follows the redirect successfully. I assume something very similar is happening in the application (which I don't have access to) that makes calls to the /task URL path. Since I cannot modify the application to make it follow redirects properly, I'm looking for a solution I can implement in Apache.

  Read the article

• Website is not accessible from server which is using proxy

  - by Bhoot

  I hosted a website in a win 2008 R2 server which runs in private domain. I set up bindings for port 80 and 443 for http & https respectively. Created inbound rule for port 80 and 443 also in windows firewall. After doing all this, i am still not able to access my website from remote machine. IE : Internet Explorer cannot display the webpage. Chrome : Oops! Google Chrome could not find xxxxxx Tried accessing website by ip address but no luck. I tried to ping that server but it says TTL expired in Transit. Now i found some more information over internet to check if the server is using any kind of proxy in between. I found my IP address at www.getip.com, but ipconfig/all gives me a different IP address. Is it really a problem if we use proxy ? I am not sure if i have concluded it correctly. But is there any way out to resolve this issue? Update ::: I figured it out. I have to call that website with external IP address. due to the proxy settings i was not able to call that website by the server's IP or name of that machine.

  Read the article

• Merging two separate DNS zones

  - by cube

  This is a hypothetical question. Let's suppose I have two networks, each with its own DNS server. Network A has names a1.local, a2.local, ... and network B has b1.local, b2.local, .... Zone file for each of the networks looks something like this: $ORIGIN local @ IN SOA .... blah blah blah a1 A 1.2.3.4 a2 A 2.3.4.5 ... for A, and $ORIGIN local @ IN SOA .... blah blah blah b1 A 3.4.5.6 b2 A 4.5.6.7 ... for B. Now I also have a regular internet domain example.com and I want to access the machines as a1.A.example.com, b1.B.example.com, ... How will I have to change the configuration of name servers in networks A and B? (in fact I am writing a super-magic DNS server, currently serving A and B separately, but there is a chance that I will have to add the ability to merge the networks; so I'm interested in knowing the problems which lie ahead of me and how to prepare for the possibility)

  Read the article

• Windows 7 system freezes: would like to know if they could be related to MrxSmb, Event ID 8003 errors

  - by lifegoeson

  First, this question centers around a home network. Is it okay to ask here? Or should I go to SuperUser? (I see less answers over there, but I'll go there if that would be more appropriate.) Network setup: 1 Machine running XP Pro 1 Machine running Win7 Ultimate Comcast router Linksys WRT610N Wireless router The Win7 machine goes into a total, unrecoverable system freeze frequently. I was tearing out my hair trying to ascertain a cause, but I noticed that it usually seems to correspond with performing operations on the shared folders on the XP machine. The last 2 occasions that the Win7 machine froze, I saw this entry for Event ID 8003 from source MrxSmb in the Event log of the XP machine: The master browser has received a server announcement from the computer WIN7_COMPUTER that believes that it is the master browser for the domain on transport NetBT_Tcpip_{320B32A7-FED9. The master browser is stopping or an election is being forced. My question is twofold: Could this cause a Win7 system freeze? If so, what could I configure differently on my network to stop these conflicts over who is the master browser? Thank you for your help!

  Read the article

• Can you see something wrong in my working .htaccess?

  - by AlexV

  OK, after many search, trial and errors I've managed to create an .htaccess that do what I wanted (see explanations and questions after the code block): <IfModule mod_rewrite.c> RewriteEngine On #1 If the requested file is not url-mapper.php (to avoid .htaccess loop) RewriteCond %{REQUEST_FILENAME} (?<!url-mapper\.php)$ #2 If the requested URI does not end with an extension OR if the URI ends with .php* RewriteCond %{REQUEST_URI} !\.(.*) [OR] RewriteCond %{REQUEST_URI} \.php.*$ [NC] #3 If the requested URI is not in an excluded location RewriteCond %{REQUEST_URI} !^/seo-urls\/(excluded1|excluded2)(/.*)?$ #Then serve the URI via the mapper RewriteRule .* /seo-urls/url-mapper.php?uri=%{REQUEST_URI} [L,QSA] </IfModule> This is what the .htaccess should do: #1 is checking that the file requested is not url-mapper.php (to avoid infinite redirect loops). This file will always be at the root of the domain. #2 the .htaccess must only catch URLs that don't end with an extension (www.foo.com -- catch | www.foo.com/catch-me -- catch | www.foo.com/dont-catch.me -- don't catch) and URLs ending with .php* files (.php, .php4, .php5, .php123...). #3 some directories (and childs) can be excluded from the .htaccess (in this case /seo-urls/excluded1 and /seo-urls/excluded2). Finally the .htaccess feed the mapper with an hidden GET parameter named uri containing the requested uri. Even if I tested and everything works, I want to know if what I do is correct (and if it's the "best" way to do it). I've learned a lot with this "project" but I still consider myself a beginner at .htaccess and regular expressions so I want to triple check it there before putting it in production...

  Read the article

• Can't connect to FTP server from a specific location

  - by wv_pip

  Last week while uploading website files to our server via FTP, the transfer failed. Ever since then, I haven't been able to connect to the server from work. I can connect just fine from home, or by using an FTP app on my cell phone as long as I'm on the cell network. I can't access the server from any machine on my work network. It's not a credential issue, either. The error message that I always get says that a connection cannot be established, and I am never prompted for my credentials. I have changed absolutely nothing on our domain controller or our firewall/router. I've contacted our ISP (who hosts the website/FTP server) and they can't find anything wrong on their end. They insist that it must be something here at the office that is blocking access. I've also tested access to other FTP servers (ea.com, nvidia.com, etc.) so I know that port 21 is not being blocked. I'm totally stumped. Any help is much appreciated. EDIT: wireshark info here: http://www.cloudshark.org/captures/85a118ae9296?filter=ip.dst%3D%3D66.118.64.208

  Read the article

• Print over the internet from a remote linux session locally (on a Windows 7 machine) to the shared printers?

  - by obeliksz

  I'm trying to use a linux virtual machine as a file server for windows clients. I have successfully implemented remote file sharing (samba+ssh) with which I am able to print locally with a little program that I made for this purpose (jetforms style)... but I would like to hear about a somewhat more direct approach. How can I attach the printers to the server, so that I can for example open a file on the remote session and in the print dialogbox I would see my local printers (on the machine from which I have established a remote session)? I guess there should be some kind of putty tunneling, but dont know how. I have a windows 7 machine locally; there is a CentOS 6 VM over the internet. It has ssh, cups, and samba. I have found a question which asks the opposite: there is a windows based server to connect form linux but that windows has a domain, mine is just a simple windows workstation that is behind NAT and has a dynamic IP. That question is: Print from Linux to Windows networked printer.

  Read the article

• Virtual hosting in lighttpd?

  - by lighttpdnewbie

  Ok, here it goes... I've seen some other posts dealing with this, but it didn't help that much. I am using windows XP. My problem is with trying to get lighttpd working with virtual hosts. Now, I managed to get everything up and working with the default /htdocs and the default page shows up just fine on the internet, but since I have several sites to host, I need virtual hosting. I managed to do it in apache, so I guessed it would work out just fine in lighttpd, but apparently I'm missing something. Ok, let's say I have domain (www.)example.org. I want everyone using that url going to the correct index.html, obviously. Let's say that index.html is in directory "websites/website1" placed under the lighttpd dir. (thus, the full path is c:/ProgramsFiles/lighttpd/websites/website1/index.html) Now: how, exactly, do I set up my virtual host (in the config file)? In detail, please, since I've tried for hours with the vague hints I got from fora and such, but it doesn't work. Also; is there something additional to do? Change the "server.bind" or get rid of the default server.document-root, or something? I appreciate all the help you can give! Especially if it's a verbatim/step-by-step solution you're offering! ;-p Edit: And, yes, my mod_simple_vhost has been enabled.

  Read the article

< Previous Page | 458 459 460 461 462 463 464 465 466 467 468 469  | Next Page >