Search Results

Search found 18961 results on 759 pages for 'tp link'.

Page 462/759 | < Previous Page | 458 459 460 461 462 463 464 465 466 467 468 469  | Next Page >

• Lost contact with my NAS after changing its IP

  - by Beles

  I did some brain-dead reconfiguring of my D-Link DNS-323 NAS some days ago. I have a home network where each computer gets a dynamically allocated IP address starting at 192.168.1.100. The irritating point (for me at least) was that the NAS changed IP if the power went down or I turned off the router. I then had to remap a drive-letter to point to the new IP address of the NAS. To remedy that I configured the NAS to have a static IP, 192.168.0.10. I had no good reason to choose that IP, other than I found it in a user manual for the NAS. After I changed the IP and rebooted the NAS it disappeared from the network and was never to be found again. Now I have a black brick standing in my home, looking good, but "dead". Could anyone point me in a direction which helps me solve this problem? I have about 100gb worth of pic of my children on this brick so I really want it back :-) Sincerely,

  Read the article

• PDFtk Password Protection Help

  - by Dave W.

  I am using Ubuntu 11.10 and am looking for a solution to password protect a bunch of pdf files in a directory in batch. I came across PDFtk and it looks like it might do what I need, but I've reviewed the command line PDFtk examples and can't figure out if there is a way to do it in batch without having to individually specify the output file name for every file. I'm hoping a command-line guru can take a look at the PDFtk syntax and tell me if there is some trick / command that will allow me to password protect a directory of pdf files (e.g., *.pdf) and overwrite the existing files using the same name, or consistently rename the individual output files without having to specify each output name individually. Here's a link to the PDFtk command line examples page: http://www.pdflabs.com/tools/pdftk-the-pdf-toolkit/ Thanks for your help. I think I've answered my own question. Here's a bash script that appears to do the trick. I'd welcome help evaluating why the code I've commented out doesn't work... #!/bin/bash # Created by Dave, 2012-02-23 # This script uses PDFtk to password protect every PDF file # in the directory specified. The script creates a directory named "protected_[DATE]" # to hold the password protected version of the files. # # I'm using the "user_pw" parameter, # which means no one will be able to open or view the file without # the password. # # PDFtk must be installed for this script to work. # # Usage: ./protect_with_pdftk.bsh [FILE(S)] # [FILE(S)] can use wildcard expansion (e.g., *.pdf) # This part isn't working.... ignore. The goal is to avoid errors if the # directory to be created already exists by only attempting to create # it if it doesn't exists # #TARGET_DIR="protected_$(date +%F)" #if [ -d "$TARGET_DIR" ] #then #echo # echo "$TARGET_DIR directory exists!" #else #echo # echo "$TARGET_DIR directory does not exist!" #fi # mkdir protected_$(date +%F) for i in *pdf ; do pdftk "$i" output "./protected_$(date +%F)/$i" user_pw [PASSWORD]; done echo "Complete. Output is in the directory: ./protected_$(date +%F)"

  Read the article

• Can I use an nVidia Geforce 9600GT for triple-monitor?

  - by John Rudy

  My work PC has (as you can guess from the title) a single Geforce 9600GT card. According to the spec page for this card, both DVI ports are Dual-Link DVI. Both are currently in use on Dell 19" 1280x1024 screens. I'm running Windows 7, with Aero enabled, for what that's worth. What I'm wondering is if I can use a standard DVI splitter cable to drive a third screen from one of the ports -- specifically a Samsung 22" 1680x1050. I'm really outgrowing the two-screen setup, and am strongly considering bringing in my home monitor (which is almost never used) to bolster my usable space. If I can't, then my alternative is to replace one of these Dells with that Samsung, to give me at least a "little" more space. (Before you ask, there's probably no chance I can get my company to spring for a second video card and third monitor. Even if I could, it would not be politically expedient, as a number of my other coworkers are already pretty jealous at my setup.)

  Read the article

• How to script Win7 start menu customizations using powershell

  - by mandrake

  I'm creating an unattended installation of Windows 7 and like to customize the start menu programmatically. The goal is a minimalistic start menu with only "All applications" and perhaps a pinned program link. Is this scriptable using powershell (or perhaps wsh)? And is it possible to change this on the default user template so that new users inherit these changes? Code samples or documentation regarding this would be nice. Summary of changes I'd like to make: Change privacy settings "store recently opened programs" (and items) Don't display... Control panel. Connect to. Etc Pin program to start menu

  Read the article

• No Obvious Answer - Query-Strings and Javascript

  - by nchaud

  Say I have this main page /my-site/all-my-bath-soaps which lists all my products. It has a search filter text box that uses javascript to filter the products they want to see on that page (the URL doesn't change as they filter). Now from many other parts of the site I want to navigate to this products-page and see specific products. E.g. <a href="/my-site/all-my-bath-soaps?filter='Nivea-Soap'"> will go to /all-my-bath-soaps and apply javascript filtering to see just that product and hide all dom nodes for the other products. The problem is if the user changes the text in the filter from 'Nivea-Soap' to 'Lynx' the javascript will work fine and show the new products but the URL stays at ?filter='Nivea-Soap'. Is there anything I can do about this? Of course, I don't want to reload the page with a new query string every time they change the search criteria. Somehow it'd be great to move the ?filter=... criteria into POST data instead - but how can I do this with a link I don't know...

  Read the article

• What scenarios are implementations of Object Management Group (OMG) Data Distribution Service best suited for?

  - by mindcrime

  I've always been a big fan of asynchronous messaging and pub/sub implementations, but coming from a Java background, I'm most familiar with using JMS based messaging systems, such as JBoss MQ, HornetQ, ActiveMQ, OpenMQ, etc. I've also loosely followed the discussion of AMQP. But I recently became aware of the Data Distribution Service Specification from the Object Management Group, and found there are a couple of open-source implementations: OpenSplice OpenDDS It sounds like this stuff is focused on the kind of high-volume scenarios one tends to associate with financial trading exchanges and what-not. My current interest is more along the lines of notifications related to activity stream processing (think Twitter / Facebook) and am wondering if the DDS servers are worth looking into further. Could anyone who has practical experience with this technology, and/or a deep understanding of it, comment on how useful it is, and what scenarios it is best suited for? How does it stack up against more "traditional" JMS servers, and/or AMQP (or even STOMP or OpenWire, etc?) Edit: FWIW, I found some information at this StackOverflow thread. Not a complete answer, but anybody else finding this question might also find that thread useful, hence the added link.

  Read the article

• Inserting new 'numbered item' on Word 2010

  - by MarceloRamires

  I have a very simple problem in Word 2010. I have a document with a Table of Contents, and I have the following items: 1. Title 1  [some text]   1.1 Title 1.1    [some text] I simply want to add an item 1.2. If I go at the end of Title 1.1 and press enter, an item 1.2 appears below it, but the text regarding item 1.1 stays below it all. I somehow used to be able to do it on word 2007, but I can't remember what I used to do, and before struggling in it for too long, I remembered SuperUser. Can someone answer this and maybe additionally link me to a tutorial on this ? Every one I find talks about having a text already numbered and adding a TOC in the beginning. I want to build the text all over the TOC.

  Read the article

• Installing MoinMoin -wiki to my user directory on a server with no root access

  - by deiga

  Hello all, I posted this on webapps, but they told me to come here :) I've been trying to install MoinMoin -wiki on this webserver, where I have no root access. The server doesn't support wsgi, but it does support cgi/fcgi/etc. I've scoured google for a simple guide on how to accomplish this, but the only guides I found were from the year 2004 or so. Other guides always assumed that one has root access. So can anyone link a good tutorial for my question or just help me out here? Your help is appreciated :) P.S. Sorry if this is the wrong stack -page

  Read the article

• Ubuntu-Java Installation-Topcoder-“Java not found”

  - by hakuna121

  I realized that this might be the dumbest question here, but being a total beginner as I am, I really couldn't figure it out after trying all kinds of instructions I could found on the web. Specs: Ubuntu 13.04; What I intended to do: check out the Algorithm Competition section, by clicking the second-to-left tab,located on the top-left of the page: http://community.topcoder.com/tc What I got: a pop-up saying Java not found! Java could not be automatically detected on your machine. This page will attempt to automatically install Java and Java Web Start. If the download and installation does not occur automatically, click the link below to go to the Sun website where you can download the latest version of Java. What I did: I followed instructions on this Ubuntu Documentation page: https://help.ubuntu.com/community/Java and installed OpenJDK(Java Runtime Environment/Browser plugin/SDK) through Ubuntu Software Center. Then I rebooted the system, tried the page again. But I still got the java not found pop-up described above. Question: What's missing the get this working? Thank you!

  Read the article

• Network trials and tribulations

  - by MauiWowie

  Hi, I am in the process of setting up a small (two PC's, both running Windows 7) network using a D-link DI-604 router (which acts only as hub, it's not set up in any way). In the Network and 'Sharing Center' in 'Control Panel' I clicked 'Set up a New (Connection or) Network'. All went well up until the moment I attempted to connect one PC with the other (in the 'Connect' dialog I entered the other PC's IP, no pwd). I can use both PC's to connect to and browse the net though, so the router/hub does not seem to be the problem. And I must have done something right, because the other computer shows up in the 'Network Map'. Any and all help is much appreciated!

  Read the article

• Oracle SOA Suite on Virtual Box

  - by sravan.sarraju(at)oracle.com

  Recently I have started my journey Oracle SOA Suite and the first big hurdle everyone warned me off is setting up Oracle SOA Suite environment in our personal machine for learning. My laziness pushed me to search for much easier way than regular all download, configuration stuff and bang..! I found in the solution oracle site itself. Oracle SOA Suite on Virtual Box. For those who are not aware of Virtual Box, it’s a virtualization software which enables u to install multiple operating systems on a virtual hard drive which in turn managed by Virtual Box. In short pack ur Operating System, Software, Files everything into a VM and carry it wherever u go. Coming to Oracle SOA Suite, Oracle is offering a prebuilt VM for download which u can mount on ur Virtual box and that all you need. Here is the link for Virtual Box image of Oracle SOA Suite. Virtual Box can be downloaded here It’s a huge download. I’m yet to try it myself. Will get back to my writer again once I’m done.

  Read the article

• Last Chance At Space

  - by Grant Fritchey

  All entries for the DBA In Space contest have to be in by this Friday, the 18th. I’m so jealous of all of you who can enter this contest. Just think about it. You’re getting a chance to take a sub-orbital rocket ride. But, here’s the kicker, the chances are limited to data professionals. That’s a pretty small sub-set when you think about it. Further, you have to gotten the answers to the quiz questions correct, which only takes a little bit of honest research, but come on. That further limits the result set. You’ve really got an excellent shot at this (and the jealousy rears it’s ugly head again). If you haven’t finished your entry, go on over to the link and get it taken care of. There’s really no reason to not do it. Oh, and by the way, if you’re one of those (I’d say crazy) people who don’t want to ride the rocket, you can take the prize in cash. Although I’d be mighty disappointed in you if you did.

  Read the article

• Is 192.168.122.1 a valid IP?

  - by Louise Hoffman

  From my understanding the networks is as follows Class A: 10.0.0.1 - 10.255.255.254 Class B: 172.16.0.1 - 172.16.255.254 Class C: 192.168.0.1 - 192.168.0.254 But then I look at ifconfig virbr0 on my Linux computer: virbr0 Link encap:Ethernet HWaddr 42:40:99:CB:02:7F inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:16 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:2842 (2.7 KiB) Here the IP address is 192.168.122.1. Is that an allowed IP? And if so, is 192.168 than actually a Class B network?

  Read the article

• Can you have a WMI query for GPO Filter based on user's OU?

  - by Jordan Weinstein

  I'm wondering if there is a way to have a WMI query check the OU of the user logging on. I'd like a GPO (linked to Citrix servers OU) to apply only to users if the user is in a certain OU - this is for Citrix so the overly obvious answer of - well just link it to the OU the user is in does not apply. This also cannot be done using security groups because a long time ago those started to get used as Distribution Groups also and now too many are widely inaccurate. Lastly I need to apply this to the entire GPO as there are more than just group policy preferences included so I can't use the item-level targeting feature either. But my OUs are accurate so I'd like to use those if I can. I'd like a WMI query filter to say, apply GPO if user is member of OU 'x' that doable?

  Read the article

• How do I unmount a charging device in Linux?

  - by PeanutsMonkey

  I have a mobile device attached via USB to a Linux box and wish to unmount it. I ran the command fdisk -l however it does not list a mount point. I then ran the command lsusb which yielded the screenshot below. I then proceeded to search the /dev/disk/by-id directory and was found the following file The file is a symbolic link to what appears to be /dev/sdc Questions Why does it not appear when I run the command fdisk -l? How do I unmount it properly without simply yanking the USB cord from the USB port?

  Read the article

• installing a script as startup service in ubuntu

  - by Jibin

  I have a script openerp-server.py in ~/openerp/stable6/server/bin/.I want it to be run at startup.(As a service or not - I don't know the difference) These are the steps I followed 1 Created a script 'openerp-server' with the following lines in /etc/init.d/ #!/bin/sh cd ~/openerp/stable6/server/bin/ exec /usr/bin/python ./openerp-server.py $@ 2 Made the script executable by using the following command sudo chmod +x /etc/init.d/openerp-server 3 Made the link run on startup by using the following command sudo update-rc.d openerp-server I checked using sysv-rc-conf.And openerp-server was selected for run level 2,3,4,5. Now after restarting I checked if the openerp-server.py is running, it was not running. Please help.

  Read the article

• How can I transfer a logged in user's login data from one server to another?

  - by Martin

  I have one server "A" where users can login. Login is verified by an LDAP server "L". I have a different server "B" were users can log in, too. Login is verified by the same LDAP server as before. Both servers are standard web servers with PHP. My goal is: If a user is logged in to server "A", and if he clicks a link to log in to server "B", the user should automatically be logged in without re-entering username and password. What is a good and secure way to achieve this? I can't submit username and crypted password to server "B". I can't use the PHP session of server "A", because it does not exit on "B". Cookies won't work either. I think that there is a way, but I just can't see it. Any help is very much appreciated.

  Read the article

• Connecting PS3 dualshock on Ubuntu 14.04 with 3.13.0-34-generic?

  - by 5th Wheel

  The last entries/queries I can find about PS3 dual shock controller are dealing with older kernel versions. It looks like there may still be a problem with using the PS3 dual shock via USB(or bluetooth) with 14.04? I'm only guessing because I get no sign of detection or input when I plug in the USB. When I run dmesg | grep sony [ 4687.762302] sony 0003:054C:0268.0003: can't set operational mode [ 4687.770639] sony: probe of 0003:054C:0268.0003 failed with error -38 So at this point, I don't know if it's worth running : sudo apt-get install xboxdrv I also found this article LINK but it's dated 01/2013. I was considering installing steam, and checking out some of the games. There are a few in particular I want to check out, but I'm afraid of purchasing them and then my controller does not work. I don't have a ps3, I just have the controller for Sixaxis/emulator/Android set up... I see mentions for QTsixa and xboxdrv, but the posts are at least a year old(older distibution/kernels) Ideally, I'd like to just plug in USB, and play. No Bluetooth.

  Read the article

• recent unreliable wireless connection with Netgear KWGR614 router

  - by gabkdlly

  Recently, my internet connection over wireless ( via a Netgear KWGR614 router ) has become unreliable, on both a Dell laptop running Ubuntu 10.04 as well as my Desktop running Ubuntu 10.10 . The problem does not seem to occur on a laptop running Windows Vista, nor on a Desktop running Windows 7 ( this machine is connected with an ethernet cable ). The problem does not seem to occur on my Openmoko Freerunner ( running Android 1.5 ), though I hardly ever use this device to connect over WLAN, so the problem may have just slipped by. On my main Ubuntu Desktop, I have tried the following wireless devices: a Longshine PCI card ( an old device with an RTL8180L chip ) a D-Link DWL-510 PCI card ( this device threw warnings in dmesg ) a USB device from MSI ( US54EX ). Usually my wireless network shows up in the network manager with a normal signal strength, even when the connection speed is slow or the connection gets reset ( asking me to click connect to re-authenticate my wireless connection ). I know that this router is susceptible to denial of service attacks, as I have previously been able to disrupt its operation by putting an nmap scan into a while loop. Is it possible that someone is jamming my signal ?

  Read the article

• Areca 1880ix RAID hangs

  - by Dave

  Areca RAID controller ARC-1880ix-12 (firmware 1.50) hangs when on high load. My setup is: Chenbro 3U chassis Intel S5500BC mainboard Xeon 5603 CPU 16GB of RAM 12 Seagate SAS drives ST32000645SS (2 of them as hot spare, 10 as RAID10) Mellanox Infiniband HBA card This server is working as external infiniband storage for Xen VMs. When load is quite big Areca's firmware hangs - it becomes unreachable even from Areca's ethernet adapter. After resetting the server power it returns to normal operation. While Areca is hanged I can confirm that it is powered (ethernet link is active) and Infiniband HBA works Ok. Thanks in advance for any idea or suggestion where the problem might be!

  Read the article

• Using a second wifi router as a wireless bridge

  - by Greg-J

  I purchased a D-Link DGL-4500 to replace my aging WRT54G around a year ago, only to find it nowhere near as reliable. It's been collecting dust since. I'm wondering if there is a way to use it as a wireless bridge so I can connect it to my home network and then use it's ethernet ports to provide network access to several devices. Is this something that can be done? If not, are there devices meant for this? Any help would be appreciated.

  Read the article

• Don't miss Virtual Developer Day - All about ADF next week

  - by Shay Shmeltzer

  In case you haven't heard we are holding a free online virtual developer day next week - July 10th that you should attend - even if you think you already know ADF. First the registration link - http://bit.ly/fusiondev. While one of the tracks is aimed at developer who are relatively new to ADF - and cover ADF Faces, ADF Controller and a comparison of productivity with Forms and other tools - the two other tracks have great content on some topics that you might not be familiar with even if you already work with ADF. This include sessions about the upcoming ADF Mobile, The new ADF support in Eclipse and information about Application Life Cycle Management with ADF and JDeveloper. As well as sessions that will open your mind to the areas where ADF integrates with other Fusion Middleware Solutions such as ADF integration with BI, WebCenter and SOA. Most of the sessions are quite heavy on demos and you'll get a chance to interact with the presenters and ask questions during the live event. You should register even if you can't attend the live event - this way you'll get an email pointing you to the recorded sessions for on demand viewing. See you next week.

  Read the article

• why is there so much variance in prices for a 2-bay NAS?

  - by jcollum

  I'm considering buying a 2bay NAS for media storage. I'm perplexed by the variety of prices. They go from about $115 to $1200. The only thing I could see that differentiated the high end drive was encryption and a dual gigabit ethernet port. I don't understand how that can add up to $800+ dollars. Clearly I should know why there's this price variance before considering buying a 2 Bay NAS. Newegg link to 2 Bay NAS Should I move this question to serverfault?

  Read the article

• Adult Swim Brings Their Programming Lineup to iOS Devices

  - by ETC

  If you’re a fan of the programming lineup on Adult Swim–such as Family Guy, Aqua Teen Hunger Force, and The Boondocks–you can now get the entire lineup for free on your iOS device. Adult Swim’s new iOS app streams Adult Swim’s programming lineup including popular shows such as Robot Chicken, Aqua Teen Hunger Force, Family Guy, The Boondocks, Metalocalypse. Hit up the link below to read more and grab a free copy. Adult Swim [iTunes App Store via Download Squad] Latest Features How-To Geek ETC What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions How to Enable User-Specific Wireless Networks in Windows 7 How to Use Google Chrome as Your Default PDF Reader (the Easy Way) How To Remove People and Objects From Photographs In Photoshop Make Efficient Use of Tab Bar Space by Customizing Tab Width in Firefox See the Geeky Work Done Behind the Scenes to Add Sounds to Movies [Video] Use a Crayon to Enhance Engraved Lettering on Electronics Adult Swim Brings Their Programming Lineup to iOS Devices Feel the Chill of the South Atlantic with the Antarctica Theme for Windows 7 Seas0nPass Now Offers Untethered Apple TV Jailbreaking

  Read the article

• How to access MySQL when I delete the root user on openSUSE 11?

  - by Negin Nicki

  Unfortunately I deleted MySQL users with the command delete from mysql.user and now I can't access MySQL. I tried looking at MySQL - ERROR 1045 - Access denied, but it is not proper for me because I don't have any user for MySQL. I uninstalled and reinstalled MySQL but I can't access MySQL. What should I do? I wanted to have phpMyAdmin without login and I ruined the whole thing. After uninstalling and having no result, I tried to delete the directories of MySQL and again installing them but again no result and now I have this error: Error 2002:can't connect to local mysql server through socket /var/lib/mysql/mysql.sock I don't have any user to reset the password of, but if I have by reinstalling which I don't know how to connect to MySQL. I tried MySQL -u root I tried MySQL I tried mysqld-safe and etc in the link

  Read the article

< Previous Page | 458 459 460 461 462 463 464 465 466 467 468 469  | Next Page >