Search Results

Search found 29686 results on 1188 pages for 'ubuntu minimal'.

Page 464/1188 | < Previous Page | 460 461 462 463 464 465 466 467 468 469 470 471  | Next Page >

• Battery life starts at 2:30 hrs (99%), but less than 1 minute later is only 1:30 hrs (99%)

  - by zondu

  After searching this and other forums, I haven't seen this same issue listed anywhere for Ubuntu 12. Prior to installing Ubuntu 12.10, my Netbook (Acer AspireOne D250, SATA HDD) was consistently getting 2:30-3 hrs battery life under Windows XP Home, SP3. However, immediately after installing Ubuntu 12.10, the battery life starts out at 2:30 hrs (99%), but less than 1 minute later suddenly drops to 1:30 hrs (99%), which seems very odd. It could be a complete coincidence that the battery is suddenly flaky at the exact same moment that Ubuntu 12.10 was installed, but that doesn't seem likely. I'm a newbie to Ubuntu, so I don't have much experience tweaking/trouble-shooting yet. Here's what I've tried so far: enabled laptop mode (sudo su, then echo 5 /proc/sys/vm/laptop_mode) and checked that it is running when the A/C adapter is unplugged, but it doesn't seem to have made any noticeable difference in battery life, installed Jupiter, but it didn't work and messed up the system, so I had to uninstall it, disabled bluetooth (wifi is still on b/c it is necessary), set the screen to lowest brightness, etc., run through at least 1 full power cycle (running until the netbook shut itself off due to critical battery) and have been using it normally (sometimes plugged in, often unplugged until the battery gets very low) for a week since installing Ubuntu 12.10. installed powertop, but have no idea how to interpret its results. Here are the results of acpi -b: w/ A/C adapter: Battery 0: Full, 100% immediately after unplugging: Battery 0: Discharging, 99%, 02:30:20 remaining 1 minute after unplugging: Battery 0: Discharging, 99%, 01:37:49 remaining 2-3 minutes after unplugging: Battery 0: Discharging, 95%, 01:33:01 remaining 10 minutes after unplugging: Battery 0: Discharging, 85%, 01:13:38 remaining Results of cat /sys/class/power_supply/BAT0/uevent: w/ A/C adapter: POWER_SUPPLY_NAME=BAT0 POWER_SUPPLY_STATUS=Full POWER_SUPPLY_PRESENT=1 POWER_SUPPLY_TECHNOLOGY=Li-ion POWER_SUPPLY_CYCLE_COUNT=0 POWER_SUPPLY_VOLTAGE_MIN_DESIGN=10800000 POWER_SUPPLY_VOLTAGE_NOW=12136000 POWER_SUPPLY_CURRENT_NOW=773000 POWER_SUPPLY_CHARGE_FULL_DESIGN=4500000 POWER_SUPPLY_CHARGE_FULL=1956000 POWER_SUPPLY_CHARGE_NOW=1956000 POWER_SUPPLY_MODEL_NAME=UM08B32 POWER_SUPPLY_MANUFACTURER=SANYO POWER_SUPPLY_SERIAL_NUMBER= immediately after unplugging: POWER_SUPPLY_NAME=BAT0 POWER_SUPPLY_STATUS=Discharging POWER_SUPPLY_PRESENT=1 POWER_SUPPLY_TECHNOLOGY=Li-ion POWER_SUPPLY_CYCLE_COUNT=0 POWER_SUPPLY_VOLTAGE_MIN_DESIGN=10800000 POWER_SUPPLY_VOLTAGE_NOW=11886000 POWER_SUPPLY_CURRENT_NOW=773000 POWER_SUPPLY_CHARGE_FULL_DESIGN=4500000 POWER_SUPPLY_CHARGE_FULL=1956000 POWER_SUPPLY_CHARGE_NOW=1937000 POWER_SUPPLY_MODEL_NAME=UM08B32 POWER_SUPPLY_MANUFACTURER=SANYO POWER_SUPPLY_SERIAL_NUMBER= 1 minute later: POWER_SUPPLY_NAME=BAT0 POWER_SUPPLY_STATUS=Discharging POWER_SUPPLY_PRESENT=1 POWER_SUPPLY_TECHNOLOGY=Li-ion POWER_SUPPLY_CYCLE_COUNT=0 POWER_SUPPLY_VOLTAGE_MIN_DESIGN=10800000 POWER_SUPPLY_VOLTAGE_NOW=11728000 POWER_SUPPLY_CURRENT_NOW=1174000 POWER_SUPPLY_CHARGE_FULL_DESIGN=4500000 POWER_SUPPLY_CHARGE_FULL=1956000 POWER_SUPPLY_CHARGE_NOW=1937000 POWER_SUPPLY_MODEL_NAME=UM08B32 POWER_SUPPLY_MANUFACTURER=SANYO POWER_SUPPLY_SERIAL_NUMBER= 2-3 minutes later: POWER_SUPPLY_NAME=BAT0 POWER_SUPPLY_STATUS=Discharging POWER_SUPPLY_PRESENT=1 POWER_SUPPLY_TECHNOLOGY=Li-ion POWER_SUPPLY_CYCLE_COUNT=0 POWER_SUPPLY_VOLTAGE_MIN_DESIGN=10800000 POWER_SUPPLY_VOLTAGE_NOW=11583000 POWER_SUPPLY_CURRENT_NOW=1209000 POWER_SUPPLY_CHARGE_FULL_DESIGN=4500000 POWER_SUPPLY_CHARGE_FULL=1956000 POWER_SUPPLY_CHARGE_NOW=1878000 POWER_SUPPLY_MODEL_NAME=UM08B32 POWER_SUPPLY_MANUFACTURER=SANYO POWER_SUPPLY_SERIAL_NUMBER= 10 minutes later: POWER_SUPPLY_NAME=BAT0 POWER_SUPPLY_STATUS=Discharging POWER_SUPPLY_PRESENT=1 POWER_SUPPLY_TECHNOLOGY=Li-ion POWER_SUPPLY_CYCLE_COUNT=0 POWER_SUPPLY_VOLTAGE_MIN_DESIGN=10800000 POWER_SUPPLY_VOLTAGE_NOW=11230000 POWER_SUPPLY_CURRENT_NOW=1239000 POWER_SUPPLY_CHARGE_FULL_DESIGN=4500000 POWER_SUPPLY_CHARGE_FULL=1956000 POWER_SUPPLY_CHARGE_NOW=1644000 POWER_SUPPLY_MODEL_NAME=UM08B32 POWER_SUPPLY_MANUFACTURER=SANYO POWER_SUPPLY_SERIAL_NUMBER= Results of upower -i /org/freedesktop/UPower/devices/battery_BAT0: w/ A/C adapter: native-path: /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0A:00/power_supply/BAT0 vendor: SANYO model: UM08B32 power supply: yes updated: Tue Nov 27 15:24:58 2012 (823 seconds ago) has history: yes has statistics: yes battery present: yes rechargeable: yes state: fully-charged energy: 21.1248 Wh energy-empty: 0 Wh energy-full: 21.1248 Wh energy-full-design: 48.6 Wh energy-rate: 8.3484 W voltage: 12.173 V percentage: 100% capacity: 43.4667% technology: lithium-ion immediately after unplugging: native-path: /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0A:00/power_supply/BAT0 vendor: SANYO model: UM08B32 power supply: yes updated: Tue Nov 27 15:41:25 2012 (1 seconds ago) has history: yes has statistics: yes battery present: yes rechargeable: yes state: discharging energy: 20.9196 Wh energy-empty: 0 Wh energy-full: 21.1248 Wh energy-full-design: 48.6 Wh energy-rate: 8.3484 W voltage: 11.86 V time to empty: 2.5 hours percentage: 99.0286% capacity: 43.4667% technology: lithium-ion History (charge): 1354023683 99.029 discharging 1 minute later: native-path: /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0A:00/power_supply/BAT0 vendor: SANYO model: UM08B32 power supply: yes updated: Tue Nov 27 15:42:31 2012 (17 seconds ago) has history: yes has statistics: yes battery present: yes rechargeable: yes state: discharging energy: 20.9196 Wh energy-empty: 0 Wh energy-full: 21.1248 Wh energy-full-design: 48.6 Wh energy-rate: 13.5432 W voltage: 11.753 V time to empty: 1.5 hours percentage: 99.0286% capacity: 43.4667% technology: lithium-ion History (charge): 1354023683 99.029 discharging History (rate): 1354023751 13.543 discharging 2-3 minutes later: native-path: /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0A:00/power_supply/BAT0 vendor: SANYO model: UM08B32 power supply: yes updated: Tue Nov 27 15:45:06 2012 (20 seconds ago) has history: yes has statistics: yes battery present: yes rechargeable: yes state: discharging energy: 20.2824 Wh energy-empty: 0 Wh energy-full: 21.1248 Wh energy-full-design: 48.6 Wh energy-rate: 13.7484 W voltage: 11.545 V time to empty: 1.5 hours percentage: 96.0123% capacity: 43.4667% technology: lithium-ion History (charge): 1354023906 96.012 discharging 1354023844 97.035 discharging History (rate): 1354023906 13.748 discharging 1354023875 12.992 discharging 1354023844 13.284 discharging 10 minutes later: native-path: /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0A:00/power_supply/BAT0 vendor: SANYO model: UM08B32 power supply: yes updated: Tue Nov 27 15:54:24 2012 (28 seconds ago) has history: yes has statistics: yes battery present: yes rechargeable: yes state: discharging energy: 18.1764 Wh energy-empty: 0 Wh energy-full: 21.1248 Wh energy-full-design: 48.6 Wh energy-rate: 13.2948 W voltage: 11.268 V time to empty: 1.4 hours percentage: 86.0429% capacity: 43.4667% technology: lithium-ion History (charge): 1354024433 86.043 discharging History (rate): 1354024464 13.295 discharging 1354024433 13.662 discharging 1354024402 13.781 discharging I noticed that between #2 and #3 (0 and 1 minutes after unplugging), while the battery still reports 99% charge and drops from 2:30 hr to 1:30 hr, the energy usage goes from 8.34 W to 13.54 W and the current_now increases, but shouldn't it be using less energy in battery mode since the screen is much dimmer and it's in power saving mode? (or is that normal behavior?) It also seems to drain more quickly than what it predicts, especially with the 1-1.25 hour drop in the first minute of being unplugged, which seems odd. What really concerns me is that Ubuntu 12.10 may not be properly managing the battery (with the sudden change in charge/life from 2:30 to 1:30 or 1:15 within a minute of unplugging), and that a new battery may quickly die under Ubuntu 12.10. I'd greatly appreciate any advice/suggestions on what to do, and especially whether there's a way to get back the 1-1.5 hrs of battery life that were suddenly lost when changing from WinXp to Ubuntu 12.10. Thanks :)

  Read the article

• unable to compile a servlet in ubuntu

  - by codeomnitrix

  I am newbie to j2ee. I have download and installed j2eesdk-1_4_03-linux.bin in my ubuntu 10.04 distribution. and then i tried to code my first servlet in it as: import java.io.*; import javax.servelet.*; import javax.servelet.http.*; public class HowdyServelet extends HttpServelet{ public void doGet(HttpServeletRequest request, HttpServeletResponse response) throws IOException, ServeletException{ PrintWriter out = response.getWriter(); response.setContentType("text/html"); out.println("<html>"); out.println("<head><title>howdy</title></head>"); out.println("<body>"); out.println("<center><h1>Howdy</h1></center>"); out.println("</body>"); out.println("</html>"); } } and here are the environment variables i set after installation: 1. J2EE_HOME=/home/vinit/SUNWappserver 2. JAVA_HOME=/home/vinit/SUNWappserver/jdk 3. CLASSPATH=/home/vinit/SUNWappserver/lib and now i tried to compile the servlet using javac HowdyServelet.java But i got following errors: HowdyServelet.java:2: package javax.servelet does not exist import javax.servelet.*; ^ HowdyServelet.java:3: package javax.servelet.http does not exist import javax.servelet.http.*; ^ HowdyServelet.java:5: cannot find symbol symbol: class HttpServelet public class HowdyServelet extends HttpServelet{ ^ HowdyServelet.java:6: cannot find symbol symbol : class HttpServeletRequest location: class HowdyServelet public void doGet(HttpServeletRequest request, HttpServeletResponse response) throws IOException, ServeletException{ ^ HowdyServelet.java:6: cannot find symbol symbol : class HttpServeletResponse location: class HowdyServelet public void doGet(HttpServeletRequest request, HttpServeletResponse response) throws IOException, ServeletException{ ^ HowdyServelet.java:6: cannot find symbol symbol : class ServeletException location: class HowdyServelet public void doGet(HttpServeletRequest request, HttpServeletResponse response) throws IOException, ServeletException{ ^ 6 errors So how to compile this servlet. Thanks in advance.

  Read the article

• install barnyard2 ubuntu 12.04

  - by Muhammad Ardiansyah

  I trying to install barnyard2 in ubuntu 12.04 32-bit I'm configure using syntax: ./configure --with-mysql-libraries=/usr/lib/x86_64-linux-gnu and when I trying to compile daq-1.1.1 using a makefile, I encountered the following errors: make[3]: Leaving directory /root/snortinstall/barnyard2/src' make[2]: Leaving directory/root/snortinstall/barnyard2/src' Making all in etc make[2]: Entering directory /root/snortinstall/barnyard2/etc' make[2]: Nothing to be done forall'. make[2]: Leaving directory /root/snortinstall/barnyard2/etc' Making all in doc make[2]: Entering directory/root/snortinstall/barnyard2/doc' make[2]: Nothing to be done for all'. make[2]: Leaving directory /root/snortinstall/barnyard2/doc' Making all in rpm make[2]: Entering directory /root/snortinstall/barnyard2/rpm' make[2]: Nothing to be done forall'. make[2]: Leaving directory /root/snortinstall/barnyard2/rpm' Making all in schemas make[2]: Entering directory/root/snortinstall/barnyard2/schemas' make[2]: Nothing to be done for all'. make[2]: Leaving directory /root/snortinstall/barnyard2/schemas' Making all in m4 make[2]: Entering directory /root/snortinstall/barnyard2/m4' make[2]: Nothing to be done forall'. make[2]: Leaving directory /root/snortinstall/barnyard2/m4' make[2]: Entering directory /root/snortinstall/barnyard2' make[2]: Nothing to be done for all-am'. make[2]: Leaving directory/root/snortinstall/barnyard2' make[1]: Leaving directory `/root/snortinstall/barnyard2'

  Read the article

• Installing SVN plugin for Eclipse on Ubuntu

  - by Zac

  I am a brand new Linux user configuring my first-ever dev sandbox in Ubuntu. I have installed Java and Eclipse and am trying to get either Subversive or Subclipse (I don't have a preference either way) but have a few questions before I start that process. I just opened Synaptic and downloaded subversion through it. (1) I'm not really sure how SVN deploys locally. My understanding is that SVN has a client and a server; the server manages the repository(ies) and the clieent just sends commands to the server. Is this correct? If so, then what did I download through Synaptic? The client, and/or the server? (2) Do these Eclipse plugins come with SVN (client or server...?) or do you have to pre-install SVN prior to installing these plugins? Basically: is SVN a pre-req for Subclipse or Subversive? Looking back at these 2 questions if someone could first explain to me the architecture of SVN, then explain how that architecture translates to downloading SVN via Synaptic, and then how it translates to downloading/installing either Eclipse plugin, I would see the "big picture" a lot better. Thanks for any and all help!

  Read the article

• Another thread pool

  A simple thread pool with minimal dependencies

  Read the article

• Automatic logging with Policy Injection Block, Structure Map, and log4net

  Log the entrance and exit of all methods in a project with minimal code clutter

  Read the article

• A lightweight FileTreeView with MultiSelect

  A lightweight event driven control with minimal recursion and no manual tracking of selected items

  Read the article

• DWinLib: An Overview

  An overview to DWinLib - a minimal Windows wrapper

  Read the article

• Howto install acts_as_xapian on Ubuntu

  - by normalocity

  I've run into some great resources for installing "acts_as_xapian", and the supporting native libraries that are necessary to make it work. I've even got it to work well on my dev machine (OS X). However, I've followed the instructions on this site, and it doesn't work on my Ubuntu 9.10 (Karmic) production box. After successfully installing the "core" and "bindings" for xapian, the start of the mongrel server fails with the following: => Booting Mongrel => Rails 2.3.5 application starting on http://0.0.0.0:3000 acts_as_xapian: No Ruby bindings for Xapian installed /home/feelgoodtrader/.gem/ruby/1.8/gems/activesupport-2.3.5/lib/active_support/dependencies.rb:105:in `const_missing': uninitialized constant ActsAsXapian::Search::Xapian (NameError) from /var/lib/gems/1.8/gems/acts_as_xapian-0.1.3/lib/acts_as_xapian/search.rb:8 from /usr/lib/ruby/1.8/rubygems/custom_require.rb:31:in `gem_original_require' from /usr/lib/ruby/1.8/rubygems/custom_require.rb:31:in `require' from /home/feelgoodtrader/.gem/ruby/1.8/gems/activesupport-2.3.5/lib/active_support/dependencies.rb:156:in `require' from /home/feelgoodtrader/.gem/ruby/1.8/gems/activesupport-2.3.5/lib/active_support/dependencies.rb:521:in `new_constants_in' from /home/feelgoodtrader/.gem/ruby/1.8/gems/activesupport-2.3.5/lib/active_support/dependencies.rb:156:in `require' from /var/lib/gems/1.8/gems/acts_as_xapian-0.1.3/lib/acts_as_xapian.rb:2 from /var/lib/gems/1.8/gems/acts_as_xapian-0.1.3/lib/acts_as_xapian.rb:1:in `each' from /var/lib/gems/1.8/gems/acts_as_xapian-0.1.3/lib/acts_as_xapian.rb:1 from /usr/lib/ruby/1.8/rubygems/custom_require.rb:31:in `gem_original_require' from /usr/lib/ruby/1.8/rubygems/custom_require.rb:31:in `require' from /home/feelgoodtrader/.gem/ruby/1.8/gems/activesupport-2.3.5/lib/active_support/dependencies.rb:156:in `require' from /home/feelgoodtrader/.gem/ruby/1.8/gems/activesupport-2.3.5/lib/active_support/dependencies.rb:521:in `new_constants_in' from /home/feelgoodtrader/.gem/ruby/1.8/gems/activesupport-2.3.5/lib/active_support/dependencies.rb:156:in `require' from /home/feelgoodtrader/.gem/ruby/1.8/gems/rails-2.3.5/lib/rails/gem_dependency.rb:208:in `load' from /home/feelgoodtrader/.gem/ruby/1.8/gems/rails-2.3.5/lib/initializer.rb:307:in `load_gems' from /home/feelgoodtrader/.gem/ruby/1.8/gems/rails-2.3.5/lib/initializer.rb:307:in `each' from /home/feelgoodtrader/.gem/ruby/1.8/gems/rails-2.3.5/lib/initializer.rb:307:in `load_gems' from /home/feelgoodtrader/.gem/ruby/1.8/gems/rails-2.3.5/lib/initializer.rb:164:in `process' from /home/feelgoodtrader/.gem/ruby/1.8/gems/rails-2.3.5/lib/initializer.rb:113:in `send' from /home/feelgoodtrader/.gem/ruby/1.8/gems/rails-2.3.5/lib/initializer.rb:113:in `run' from /home/feelgoodtrader/feelgoodtrader/config/environment.rb:13 from /usr/lib/ruby/1.8/rubygems/custom_require.rb:31:in `gem_original_require' from /usr/lib/ruby/1.8/rubygems/custom_require.rb:31:in `require' from /home/feelgoodtrader/.gem/ruby/1.8/gems/activesupport-2.3.5/lib/active_support/dependencies.rb:156:in `require' from /home/feelgoodtrader/.gem/ruby/1.8/gems/activesupport-2.3.5/lib/active_support/dependencies.rb:521:in `new_constants_in' from /home/feelgoodtrader/.gem/ruby/1.8/gems/activesupport-2.3.5/lib/active_support/dependencies.rb:156:in `require' from /home/feelgoodtrader/.gem/ruby/1.8/gems/rails-2.3.5/lib/commands/server.rb:84 from /usr/lib/ruby/1.8/rubygems/custom_require.rb:31:in `gem_original_require' from /usr/lib/ruby/1.8/rubygems/custom_require.rb:31:in `require' from script/server:3

  Read the article

• How to connect to a wireless network that has a two word name with a space?

  - by grinan

  Ok, I have searched for some time in earnest for an answer to this question. I have a Beagleboard which has Ubuntu 10.10 Minimal install for Arm running on it. With the default install, minimal tools, no GUI, I am unable to connect to my wireless network. The name of my network is "MYNAME NETWORK". Using a text editor to edit /etc/network/interfaces I can not seem to connect at all. As an experiment, I connected to a friends network, which has a one word name "dystek",and was able to connect with Zero issues, and update and install a full GUI for ubuntu Arm. The problem is that I don't want a full blown gui on the beagleboard, just a minimal install of ubuntu with CLI is all I need or want. Is there anyway to connect to my wireless network via editing the /etc/network/interfaces file. Surely there is... I just don't know how. Right now my interfaces file looks like this: auto lo iface lo inet loopback auto wlan0 iface wlan0 inet static address 192.168.1.200 netmask 255.255.255.0 gateway 192.168.1.1 wireless-essid BARRETT NETWORK wireless-key 46456xxxxxxxx Any help would be appreciated.

  Read the article

• Creating Python C module from Fortran sources on Ubuntu 10.04 LTS

  - by Botondus

  In a project I work on we use a Python C module compiled from Fortran with f2py. I've had no issues building it on Windows 7 32bit (using mingw32) and on the servers it's built on 32bit Linux. But I've recently installed Ubuntu 10.04 LTS 64bit on my laptop that I use for development, and when I build it I get a lot of warnings (even though I've apparently installed all gcc/fortran libraries/compilers), but it does finish the build. However when I try to use the built module in the application, most of it seems to run well but then it crashes with an error: * glibc detected /home/botondus/Envs/gasit/bin/python: free(): invalid next size (fast): 0x0000000006a44760 ** Warnings on running *f2py -c -m module_name ./fortran/source.f90* customize UnixCCompiler customize UnixCCompiler using build_ext customize GnuFCompiler Could not locate executable g77 Found executable /usr/bin/f77 gnu: no Fortran 90 compiler found gnu: no Fortran 90 compiler found customize IntelFCompiler Could not locate executable ifort Could not locate executable ifc customize LaheyFCompiler Could not locate executable lf95 customize PGroupFCompiler Could not locate executable pgf90 Could not locate executable pgf77 customize AbsoftFCompiler Could not locate executable f90 absoft: no Fortran 90 compiler found absoft: no Fortran 90 compiler found absoft: no Fortran 90 compiler found absoft: no Fortran 90 compiler found absoft: no Fortran 90 compiler found absoft: no Fortran 90 compiler found customize NAGFCompiler Found executable /usr/bin/f95 customize VastFCompiler customize GnuFCompiler gnu: no Fortran 90 compiler found gnu: no Fortran 90 compiler found customize CompaqFCompiler Could not locate executable fort customize IntelItaniumFCompiler Could not locate executable efort Could not locate executable efc customize IntelEM64TFCompiler customize Gnu95FCompiler Found executable /usr/bin/gfortran customize Gnu95FCompiler customize Gnu95FCompiler using build_ext I have tried building a 32bit version by installing the gfortran multilib packages and running f2py with -m32 option (but with no success): f2py -c -m module_name ./fortran/source.f90 --f77flags="-m32" --f90flags="-m32" Any suggestions on what I could try to either build 32bit version or correctly build the 64bit version? Edit: It looks like it crashes right at the end of a subroutine. The 'write' executes fine... which is strange. write(6,*)'Eh=',Eh end subroutine calcolo_involucro The full backtrace is very long and I'm not sure if it's any help, but here it is: *** glibc detected *** /home/botondus/Envs/gasit/bin/python: free(): invalid next size (fast): 0x0000000007884690 *** ======= Backtrace: ========= /lib/libc.so.6(+0x775b6)[0x7fe24f8f05b6] /lib/libc.so.6(cfree+0x73)[0x7fe24f8f6e53] /usr/local/lib/python2.6/dist-packages/numpy/core/multiarray.so(+0x4183c)[0x7fe24a18183c] /home/botondus/Envs/gasit/bin/python[0x46a50d] /usr/local/lib/python2.6/dist-packages/numpy/core/multiarray.so(+0x4fbd8)[0x7fe24a18fbd8] /usr/local/lib/python2.6/dist-packages/numpy/core/multiarray.so(+0x5aded)[0x7fe24a19aded] /home/botondus/Envs/gasit/bin/python(PyEval_EvalFrameEx+0x516e)[0x4a7c5e] /home/botondus/Envs/gasit/bin/python(PyEval_EvalFrameEx+0x5a60)[0x4a8550] /home/botondus/Envs/gasit/bin/python(PyEval_EvalCodeEx+0x911)[0x4a9671] /home/botondus/Envs/gasit/bin/python[0x537620] /home/botondus/Envs/gasit/bin/python(PyObject_Call+0x47)[0x41f0c7] /home/botondus/Envs/gasit/bin/python[0x427dff] /home/botondus/Envs/gasit/bin/python(PyObject_Call+0x47)[0x41f0c7] /home/botondus/Envs/gasit/bin/python[0x477bff] /home/botondus/Envs/gasit/bin/python[0x46f47f] /home/botondus/Envs/gasit/bin/python(PyObject_Call+0x47)[0x41f0c7] /home/botondus/Envs/gasit/bin/python(PyEval_EvalFrameEx+0x4888)[0x4a7378] /home/botondus/Envs/gasit/bin/python(PyEval_EvalCodeEx+0x911)[0x4a9671] /home/botondus/Envs/gasit/bin/python(PyEval_EvalFrameEx+0x4d19)[0x4a7809] /home/botondus/Envs/gasit/bin/python(PyEval_EvalCodeEx+0x911)[0x4a9671] /home/botondus/Envs/gasit/bin/python(PyEval_EvalFrameEx+0x4d19)[0x4a7809] /home/botondus/Envs/gasit/bin/python(PyEval_EvalCodeEx+0x911)[0x4a9671] /home/botondus/Envs/gasit/bin/python[0x537620] /home/botondus/Envs/gasit/bin/python(PyObject_Call+0x47)[0x41f0c7] /home/botondus/Envs/gasit/bin/python(PyEval_CallObjectWithKeywords+0x43)[0x4a1b03] /usr/local/lib/python2.6/dist-packages/numpy/core/multiarray.so(+0x2ee94)[0x7fe24a16ee94] /home/botondus/Envs/gasit/bin/python(_PyObject_Str+0x61)[0x454a81] /home/botondus/Envs/gasit/bin/python(PyObject_Str+0xa)[0x454b3a] /home/botondus/Envs/gasit/bin/python[0x461ad3] /home/botondus/Envs/gasit/bin/python[0x46f3b3] /home/botondus/Envs/gasit/bin/python(PyObject_Call+0x47)[0x41f0c7] /home/botondus/Envs/gasit/bin/python(PyEval_EvalFrameEx+0x4888)[0x4a7378] /home/botondus/Envs/gasit/bin/python(PyEval_EvalCodeEx+0x911)[0x4a9671] /home/botondus/Envs/gasit/bin/python(PyEval_EvalFrameEx+0x4d19)[0x4a7809] /home/botondus/Envs/gasit/bin/python(PyEval_EvalFrameEx+0x5a60)[0x4a8550] ======= Memory map: ======== 00400000-0061c000 r-xp 00000000 08:05 399145 /home/botondus/Envs/gasit/bin/python 0081b000-0081c000 r--p 0021b000 08:05 399145 /home/botondus/Envs/gasit/bin/python 0081c000-0087e000 rw-p 0021c000 08:05 399145 /home/botondus/Envs/gasit/bin/python 0087e000-0088d000 rw-p 00000000 00:00 0 01877000-07a83000 rw-p 00000000 00:00 0 [heap] 7fe240000000-7fe240021000 rw-p 00000000 00:00 0 7fe240021000-7fe244000000 ---p 00000000 00:00 0 7fe247631000-7fe2476b1000 r-xp 00000000 08:03 140646 /usr/lib/libfreetype.so.6.3.22 7fe2476b1000-7fe2478b1000 ---p 00080000 08:03 140646 /usr/lib/libfreetype.so.6.3.22 7fe2478b1000-7fe2478b6000 r--p 00080000 08:03 140646 /usr/lib/libfreetype.so.6.3.22 7fe2478b6000-7fe2478b7000 rw-p 00085000 08:03 140646 /usr/lib/libfreetype.so.6.3.22 7fe2478b7000-7fe2478bb000 r-xp 00000000 08:03 263882 /usr/lib/python2.6/dist-packages/PIL/_imagingft.so 7fe2478bb000-7fe247aba000 ---p 00004000 08:03 263882 /usr/lib/python2.6/dist-packages/PIL/_imagingft.so 7fe247aba000-7fe247abb000 r--p 00003000 08:03 263882 /usr/lib/python2.6/dist-packages/PIL/_imagingft.so 7fe247abb000-7fe247abc000 rw-p 00004000 08:03 263882 /usr/lib/python2.6/dist-packages/PIL/_imagingft.so 7fe247abc000-7fe247abf000 r-xp 00000000 08:03 266773 /usr/lib/python2.6/lib-dynload/_bytesio.so 7fe247abf000-7fe247cbf000 ---p 00003000 08:03 266773 /usr/lib/python2.6/lib-dynload/_bytesio.so 7fe247cbf000-7fe247cc0000 r--p 00003000 08:03 266773 /usr/lib/python2.6/lib-dynload/_bytesio.so 7fe247cc0000-7fe247cc1000 rw-p 00004000 08:03 266773 /usr/lib/python2.6/lib-dynload/_bytesio.so 7fe247cc1000-7fe247cc5000 r-xp 00000000 08:03 266786 /usr/lib/python2.6/lib-dynload/_fileio.so 7fe247cc5000-7fe247ec4000 ---p 00004000 08:03 266786 /usr/lib/python2.6/lib-dynload/_fileio.so 7fe247ec4000-7fe247ec5000 r--p 00003000 08:03 266786 /usr/lib/python2.6/lib-dynload/_fileio.so 7fe247ec5000-7fe247ec6000 rw-p 00004000 08:03 266786 /usr/lib/python2.6/lib-dynload/_fileio.so 7fe247ec6000-7fe24800c000 r-xp 00000000 08:03 141358 /usr/lib/libxml2.so.2.7.6 7fe24800c000-7fe24820b000 ---p 00146000 08:03 141358 /usr/lib/libxml2.so.2.7.6 7fe24820b000-7fe248213000 r--p 00145000 08:03 141358 /usr/lib/libxml2.so.2.7.6 7fe248213000-7fe248215000 rw-p 0014d000 08:03 141358 /usr/lib/libxml2.so.2.7.6 7fe248215000-7fe248216000 rw-p 00000000 00:00 0 7fe248216000-7fe248229000 r-xp 00000000 08:03 140632 /usr/lib/libexslt.so.0.8.15 7fe248229000-7fe248428000 ---p 00013000 08:03 140632 /usr/lib/libexslt.so.0.8.15 7fe248428000-7fe248429000 r--p 00012000 08:03 140632 /usr/lib/libexslt.so.0.8.15 7fe248429000-7fe24842a000 rw-p 00013000 08:03 140632 /usr/lib/libexslt.so.0.8.15 7fe24842a000-7fe248464000 r-xp 00000000 08:03 141360 /usr/lib/libxslt.so.1.1.26 7fe248464000-7fe248663000 ---p 0003a000 08:03 141360 /usr/lib/libxslt.so.1.1.26 7fe248663000-7fe248664000 r--p 00039000 08:03 141360 /usr/lib/libxslt.so.1.1.26 7fe248664000-7fe248665000 rw-p 0003a000 08:03 141360 /usr/lib/libxslt.so.1.1.26 7fe248665000-7fe24876e000 r-xp 00000000 08:03 534240 /usr/local/lib/python2.6/dist-packages/lxml/etree.so 7fe24876e000-7fe24896d000 ---p 00109000 08:03 534240 /usr/local/lib/python2.6/dist-packages/lxml/etree.so 7fe24896d000-7fe24896e000 r--p 00108000 08:03 534240 /usr/local/lib/python2.6/dist-packages/lxml/etree.so 7fe24896e000-7fe248999000 rw-p 00109000 08:03 534240 /usr/local/lib/python2.6/dist-packages/lxml/etree.so 7fe248999000-7fe2489a7000 rw-p 00000000 00:00 0 7fe2489a7000-7fe2489bd000 r-xp 00000000 08:03 132934 /lib/libgcc_s.so.1

  Read the article

• not able to make entry of ubuntu 10.04 grub.cfg into redhat 5.1 menu.lst file to run 2 linux os and

  - by Deepak Narwal

  Hello friend... In my computer there are three operating systems.. First i installed Windows 7 then i installed ubuntu 10.04 and in last i installed redhat 5.1 NOw i know one thing as i installed redhat then grub installed by ubuntu will be overwritten by redhat grub..and i know that to see all three operating syetm at the startup i have to make entry of /boot/grub/cfg into /boot/grub/menu.lst file.. Now the problem is like this In te previous version it was very easy to play with ubuntu grub file but now this file is modified..NOw i dont know what is to be picked up from ubuntu /grub/grub.cfg file so that i can make entry in redhat /boot/grub/menu.lst file.. In short i am not able to put entry of grub.cfg file into redhat menu.lst file.. will u help me plz i want to work on these thre eOS..

  Read the article

• Windows 7 host with Ubuntu Guest and a performance hit, memory locks?

  - by Cyrylski

  I have a brand new Lenovo T510 with Core i5 and 4GB of RAM with Windows 7 on it. I Installed Ubuntu 10.10 in a Virtualbox. For some reason system gets really slow on this setup which makes me really angry. There's a video card shared with full 3D support enabled and 1GB of RAM allocated for the Ubuntu machine. It may sound stupid, but WHY is the whole memory consumed in an instant when I run Virtualbox? I struggled for like 10 minutes restraining myself from a brutal reset, and now everything runs smooth but memory "in use" in Resource Monitor is 3GB flat with only Chrome running. I'm new to Windows 7, but I'm really disappointed with performance at this point... I used to work in a different environment with much slower hardware and there was no such problem (WinXP over Ubuntu, 1GB out of 2GB allocated for WinXP guest on intel GMA). This is, until I clogged RAM totally there. But I was capable of running Chrome, Firefox and Apache server on a 1GB RAM in Ubuntu there and Photoshop CS4 on Windows XP and it worked. In this case I can't go beyond setting up Ubuntu properly. I bet I'm doing something wrong.

  Read the article

• How to fix "BASIC runtime error 1; Type: com.sun.star.uno.Runtime Exception, Message: Toolbar do not exist " error in Libreoffice calc, Ubuntu 12.04

  - by PDeb

  I get the following error while openning a .xls file in Libreoffice Calc, Ubuntu 12.04 [LibreOffice 3.5.5.2; Build ID: 350m 1 (Build:2)] To overcome this I checked the LibreOffice Security Level to Low under Macro Security (from Tools---- Options--- Security tab. Then I went ahead intalling java by running the following commands from the terminal window (with some tips from various forums) sudo add-apt-repository ppa:libreoffice/ppa sudo apt-get update sudo apt-get install libreoffice libreoffice-java-common libreoffice-math libreoffice-gnome libreoffice-java-common Still I got the BASIC runtime error (as in the title), even after clicking Tools---- Options ---- Java and checking the 'Use a Java runtime environment option' and then clicking on 'Sun Microsystems Inc' under listed JRE environments installed. Even I ran the following commands to install latest Java run time environments from terminal window sudo apt-get install openjdk-7-jre icedtea-7-plugin But still I get the same Basicruntime error (details as in the title bar). This particular file opens perfectly in Microsoft Excel 2007, in Win XP Professional.

  Read the article

• Used DBAN to wipe Lenovo u410 then installed Ubuntu. Need to install windows 8, but I get an error.

  - by David

  When I try to boot from my windows 8 USB (tested on a separate PC), I get this error text "The boot configuration data for your pc is missing or contains errors." I want to install windows again so I can fix a battery issue I'm having. Lenovo's power management app has an option to keep the battery at 60% if the laptop stays plugged in most of the time. I enabled this, then formatted without changing it back. I think there might be a raid setup that I may need to remove or something. I don't mind removing Ubuntu and starting fresh. I would just love some help with all this, I'm a noob when it comes to Linux.

  Read the article

• I/O errors are reported when I try to install Ubuntu, but the SMART data is good. Is my hard disk dying?

  - by James

  When I try to install linux, it tells me there is an input output error on dev sda. I have tried both Ubuntu and Mint on two different computers. So that narrows it down to the hdd. After hours of googling and trying different things I tried making the hardrive ext4 with gparted but that comes up with an error. This makes me think that the hdd is bad. There are a few reasons I think the hdd isn't bad. I can use the hdd in windows fully. Windows and gparted disk health checks both say it is fine. Its SMART data is all good. So... help?

  Read the article

• Can aynone tell me what exactly 32bit/64bit and x86 and AMD64 have to do with the different choices on the download site of Ubuntu?

  - by Elysium

  SORRY for the newbie question, but I am still learning. I am wondering if x86 simply refers to the intel CPUs and AMD64 simply refers to the AMD CPUs? While....32bit and 64bit to the processor types? I was trying to download the intel 64bit version of the Ubuntu installer, but it wont give the option of x86 and AMD64....only the 32bit and 64bit can be chosen. Does this mean that someone with an Intel CPU and another person with an AMD CPU will download the same install file? (obviously depending on the bit version of their CPUs this might differ....but that's another thing).

  Read the article

• Windows 7/Ubuntu 12 dual boot deleted for Windows 8 installation. How to make grub rescue go away?

  - by dimious

  I had a Windows 7/Ubuntu 12 dual boot and I decided to clean install Windows 8 over them. The problem is that after I deleted all partitions and installed windows I was getting an "Operation system not found", however after an "enter" the system will normally boot into Windows 8. I realized that Windows did their trick and put the system (not partition anymore?!?) "tag" (Disk Management) on my media hard drive. After trying to fix the boot/mbr to be able to boot from my main drive the "Operation system not found" changed to the "grub rescue" prompt. I know that I cannot use that because I have killed the grub files. Windows can still boot as long as I choose to boot from the media drive. The question is, is there any way to move the "system", whatever it is now, to the main drive and have the PC boot from there, while making grub disappear? And if that is possible after that, can I just make the Media drive inactive or I will have to somehow remove the "system" tag?

  Read the article

• I tried to install Ubuntu (with Unity), but I couldn't select the keyboard layout on install. How can I do it?

  - by Pascual

  I can select language, (I wanted English), but I wanted to select "international (with dead tilde)" and I cannot find an option to do it unlike Xubuntu or Lubuntu. Usually, in previous editions, before unity, there were two columns ... one for selecting language and other to select the kind of layout and there was a box so you can test the keyboard. Now, there is only one column and I need the dead tilde. How can I do it? Why Ubuntu is hiding these options? Thanks

  Read the article

• Problem! I can't add work areas in gnome flashback ubuntu 14.04 or make the alt-tab work!

  - by user2970454

  Please, I have been dealing with the alt-tab problem for a long time. I have alreade check keyboard shortcuts in the configuration panel but it still doesn't work. (I already had this problem in ubuntu 12.04, but since I installed 14.04 another problem came arround. I can't add work spaces. I tryed changing the amount of work areas by right clicking in the desktop's miniature but it does't chenge. Anyone can help me find this parameters in a file wich I may be able to edit using "sudo nano" or something similar? Thaks! PS: I also have problems with the backlight but that may be another issue since I had to install samsung-backlight in 12.04 but it isn't availabe for 14.04. I just mention it in case someone knows somthing about it.

  Read the article

• Ubuntu 14.04 upgrade succeeded partially - I would like to use a different mirror; how can I do that?

  - by user290648

  When I wanted to upgrade from Ubuntu 13.10 to 14.04 the update manager told me that there was an unresolvable problem with calculating the upgrade. In order to see more details I performed the following on the command line: apt-get update apt-get upgrade apt-get dist-upgrade apt-get install update-manager-core do-release-upgrade Now do-release-upgrade tells me that no newer version is available but the "about" box in the main menu tells me I am still on 13.10. I think the latter is right, as for instance in the "system settings" there is no way to select local menus, which is present in 14.04 (I tried with a DVD, and there it is). Maybe the problem is related to the fact that "apt-get update" cannot get two resources called "saucy/InRelease" and "saucy/main/binary-i386/Packages" from the mirror (mirror.informatik.uni-mannheim.de; 404 not found). I would like to use a different mirror; how can I do that? Any help appreciated, thanks in advance.

  Read the article

• when i load ubuntu i get the log on screen, but even with correct password i cant log on.. have looged in several times before successfully!

  - by mybox

  I have been using ubuntu 12.04 for a few months now. but have now come across a problem that i cant get past. I am stuck at the log on screen= i enter my password but i get a black screen flases up and the log on prompt reappears!!! tried using terminal prompts and i actually have loggin it- but not according to the main log onm screen. I cant get my desktop active as the log on prompt is there. when i put a wrong password in i get an invalid password message- with the correct password the log on screen just reappears!!!please help.

  Read the article

• Wired PS/2 Keyboard and Mouse do not work in 12.04 Live CD or after fresh 12.04 install - Foxconn D270S Atom Motherboard

  - by david krajewski

  My Wired PS/2 keyboard and mouse do not work in 12.04, either in a fresh install or from the Live CD. A USB keyboard and mouse will work. The PS/2 keyboard and mouse will work using the same hardware and a fresh 10.04 Ubuntu install or a fresh Windows 7 install. The motherboard is a Foxconn D270S Atom based motherboard. This problem is specific to this motherboard and Ubuntu 12.04. So far I've tried running in the fresh 12.04 install: sudo apt-get install sudo apt-get upgrade sudo apt-get dist-upgrade After the apt-get upgraded the first time, I now get to the point where there are 0 items to be upgraded. Rebooted and still no PS/2 keyboard/mouse. I've also tried adding the following lines to GRUB at boot time (the PS/2 keyboard works in GRUB) acpi=noirq acpi=off Neither setting made any difference. The motherboard is a Foxconn D270S Atom based motherboard. Even more interestingly, 12.04 recognizes the same PS/2 keyboard and mouse on a separate Gigabyte AM3+ based motherboard. I only have this problem on this particular motherboard with Ubuntu 12.04. Any help would be appreciated. I bought this low-power motherboard specifically for the task of running Ubuntu 12.04 for the next five years... Update... I dug out an old PS/2 mouse that does not use a PS/2 to USB adapter but is directly wired for PS/2. Still no PS/2 keyboard or mouse after reboot. Again, I only have this problem with this motherboard and 12.04 Ubuntu. Other motherboards work fine with 12.04 and this motherboard works fine with 10.04. Update 2... I installed the 12.04 Server version. The text-based installer recognized the keyboard without issue, but after the first boot into the installed OS, the PS/2 keyboard would no longer respond. I tried installing Gnome on the Server install and the PS/2 mouse and keyboard don't work in Gnome either. I Opened bug #995570 for this issue

  Read the article

• Installation after boot shows no display

  - by matthias

  I just booted 12.04 for installation from USB-stick. But there is a problem with the display. After boot I see a rectangle on the lower left corner of the screen, after a while I see "Ubuntu 12.04 ..." loading from USB-Stick, the Ubuntu-Desktop starts fine, clicking on Ubuntu-Install seems to work ... till identification, then Installation-window closed and ... nothing more happens. So I want to try Installation direct from the Menu at the beginning - before Ubuntu-12.04-loading. Butt I cannot see any menus at that time. I think there is an graphic-problem? How can I get the installation by menus, how would the Installation via Desktop going to work? Bye Matthias

  Read the article

• Why do apache2 upgrades remove and not re-install libapache2-mod-php5?

  - by nutznboltz

  We repeatedly see that when an apache2 update arrives and is installed it causes the libapache2-mod-php5 package to be removed and does not subsequently re-install it automatically. We must subsequently re-install the libapache2-mod-php5 manually in order to restore functionality to our web server. Please see the following github gist, it is a contiguous section of our server's dpkg.log showing the November 14, 2011 update to apache2: https://gist.github.com/1368361 it includes 2011-11-14 11:22:18 remove libapache2-mod-php5 5.3.2-1ubuntu4.10 5.3.2-1ubuntu4.10 Is this a known issue? Do other people see this too? I could not find any launchpad bug reports about it. Platform details: $ lsb_release -ds Ubuntu 10.04.3 LTS $ uname -srvm Linux 2.6.38-12-virtual #51~lucid1-Ubuntu SMP Thu Sep 29 20:27:50 UTC 2011 x86_64 $ dpkg -l | awk '/ii.*apache/ {print $2 " " $3 }' apache2 2.2.14-5ubuntu8.7 apache2-mpm-prefork 2.2.14-5ubuntu8.7 apache2-utils 2.2.14-5ubuntu8.7 apache2.2-bin 2.2.14-5ubuntu8.7 apache2.2-common 2.2.14-5ubuntu8.7 libapache2-mod-authnz-external 3.2.4-2+squeeze1build0.10.04.1 libapache2-mod-php5 5.3.2-1ubuntu4.10 Thanks At a high-level the update process looks like: package package_name do action :upgrade case node[:platform] when 'centos', 'redhat', 'scientific' options '--disableplugin=fastestmirror' when 'ubuntu' options '-o Dpkg::Options::="--force-confdef" -o Dpkg::Options::="--force-confold"' end end But at a lower level def install_package(name, version) run_command_with_systems_locale( :command = "apt-get -q -y#{expand_options(@new_resource.options)} install #{name}=#{version}", :environment = { "DEBIAN_FRONTEND" = "noninteractive" } ) end def upgrade_package(name, version) install_package(name, version) end So Chef is using "install" to do "update". This sort of moves the question around to "how does apt-get safe-upgrade" remember to re-install libapache-mod-php5? The exact sequence of packages that triggered this was: apache2 apache2-mpm-prefork apache2-mpm-worker apache2-utils apache2.2-bin apache2.2-common But the code is attempting to run checks to make sure the packages in that list are installed already before attempting to "upgrade" them. case node[:platform] when 'debian', 'centos', 'fedora', 'redhat', 'scientific', 'ubuntu' # first primitive way is to define the updates in the recipe # data bags will be used later %w/ apache2 apache2-mpm-prefork apache2-mpm-worker apache2-utils apache2.2-bin apache2.2-common /.each{ |package_name| Chef::Log.debug("is #{package_name} among local packages available for changes?") next unless node[:packages][:changes].keys.include?(package_name) Chef::Log.debug("is #{package_name} available for upgrade?") next unless node[:packages][:changes][package_name][:action] == 'upgrade' package package_name do action :upgrade case node[:platform] when 'centos', 'redhat', 'scientific' options '--disableplugin=fastestmirror' when 'ubuntu' options '-o Dpkg::Options::="--force-confdef" -o Dpkg::Options::="--force-confold"' end end tag('upgraded') } # after upgrading everything, run yum cache updater if tagged?('upgraded') # Remove old orphaned dependencies and kernel images and kernel headers etc. # Remove cached deb files. case node[:platform] when 'ubuntu' execute 'apt-get -y autoremove' execute 'apt-get clean' # Re-check what updates are available soon. when 'centos', 'fedora', 'redhat', 'scientific' node[:packages][:last_time_we_looked_at_yum] = 0 end untag('upgraded') end end But it's clear that it fails since the dpkg.log has 2011-11-14 11:22:25 install apache2-mpm-worker 2.2.14-5ubuntu8.7 on a system which does not currently have apache2-mpm-worker. I will have to discuss this with the author, thanks again.

  Read the article

< Previous Page | 460 461 462 463 464 465 466 467 468 469 470 471  | Next Page >