Search Results

Search found 54311 results on 2173 pages for 'right click menu'.

Page 465/2173 | < Previous Page | 461 462 463 464 465 466 467 468 469 470 471 472  | Next Page >

• How do I reset/update my BIOS for Optiplex GX280?

  - by Sam Langlhey

  So far this has been a nightmare for me, which has been frustrating me constantly. I am using Dell Optiplex GX280 with Windows XP home edition, which is running a BIOS version A04. Recently, i've rebooted the pc to find out that its not booting. It will get to the Windows boot up screen with the progress bar but only to restart to the same process again, over and over. Frustrated that I am, i've inserted the Windows recovery CD to at least either repair of reinstall the operating system to find out that was not possible. I hit F8 to have the boot options, each of the boot option that I've selected gave me an error saying: "Selected boot device is not available." Right after that, I went to the BIOS setting and did a diagnostic test, which recognized all the Boot devices onboard. Now, I cannot even repair of reinstall Windows XP, because the system is not booting from none of the boot devices. The surprise is when I removed the hard-drive from the computer and loaded it on into another computer successfully; that's right, there is nothing wrong with the hard drive. After that I was totally puzzled. I found a few pointers online saying that the BIOS start-up block might be corrupted itself and I might need to flash/update the BIOS. I found the detailed instruction on how to create a Boot up disk by downloading the BIOS firmware from the manufacture's website. I did exactly as instructed below: Download the latest version or your choose version of BIOS file for your computer or motherboard from the manufacturer’s support site. Rename the downloaded file to AMIBOOT.ROM. Copy the file to a floppy disk. Insert the floppy disk to the floppy drive. Turn on the system. After I did that and powered on the PC to boot from the floppy drive, it gave me this error message: "Non-System Disk or Disk Error. Replace and Strike any key when ready." I did all that, and I kept on pressing [Ctrl]+[Home] to force it, but it did not did any satisfying result. Desperate as I am, my next attempt is to try the instruction below. Since I want to be ready, in the event it does not work, do you have any solution that you can provide? Please keep in mind that I cannot boot from any of the devices at this moment. My only hope now is to come on with a solution that will work through the Floppy drive, since that's the only drive that affected. Thank you very much for your advice and support in advance. To create a Windows startup disk, insert a floppy disk into the drive of a similarly configured, working Windows XP system, launch My Computer, right-click the floppy disk icon, and select the Format command from the context menu. When you see the Format dialog box, leave all the default settings as they are and click the Start button. Once the format operation is complete, close the Format dialog box to return to My Computer, double-click the drive C icon to access the root directory, and copy the following three files to the floppy disk: Boot.ini NTLDR Ntdetect.com

  Read the article

• Can spliting an access database cause printer and reporting issues?

  - by leeand00

  We have a setup in which our users log into an access database using MS Access 2003 over an RDP connection. The user's login to their own machines first using a roaming profile. They then click an rdp connection file on the desktop and login to the remote server, via RDP, where they use MS Access as the shell; they don't have any access to any of explorer.exe features such as the start menu. The database they are logging into is more of an application, and provides functionality for entering data, querying data, and running reports via form based menus. It all worked pretty well until we split the database as it was nearing 2GBs in size. We moved out the payroll data into a separate partition, a database with the same name in a different folder, both of them on the server. Only two tables were moved into this new database partition, and they were re-linked as external tables in the new partition. Now while everything appears to be working fine data-wise after the split, there's a new issue when our users login via RDP and attempt to run reports: often the report will not display and instead the user sees an error about the click event of the form. At first I didn't even know it was printer-related, as we didn't really change anything related to the printers as far as I knew. Confused about the error, I talked to the guy who previously worked here and who was in charge of splitting the database, and he told me to tell the users to set their default printers (on their local machines, not on the server) to the "printer" Microsoft XPS Document Writer which isn't a physical printer at all. This allowed the user's to display their reports, but if they want to print out reports, they are required to go to the File menu and select Print, clicking the print icon on the toolbar takes them to a Save As... dialog as would be expected when using the Microsoft XPS Document Writer as your default printer. It's easy to tell if the user is having a problem because a quick mouseover of the printer icon will yield a tooltip of (none) when they cannot access their reports, and a tooltip of Microsoft XPS Document Writer when they can view the reports. If the user's printer is set to anything other than Microsoft XPS Document Writer as the default on their local machine, then (none) is always displayed when they rdp to the database. The RDP settings are setup to transfer the local printer to the server. Telling the users to do this to print has been more of a band-aid on the whole situation until we find a better solution and an explanation as to why splitting a database would prevent users from printing or even viewing access database reports. Which is why I'm here asking this question. Also of note all the printers on the network now show up on the server so that when the users do click File->Print to print their reports on a physical printer, they have to look through a huge list of printers to find theirs in the dropdown. So the little band-aid fix we have is not ideal. Previously, only the printers on the user's local machine displayed here, and not all the printers on the network. My co-worker seems to think this has something to do with permissions, I personally think it has to do with roaming profiles, and Group Policies which is what I've been reading up on. I really don't know how to fix this or how it is related to splitting the database.

  Read the article

• SQL SERVER – Auto Complete and Format T-SQL Code – Devart SQL Complete

  - by pinaldave

  Some people call it laziness, some will call it efficiency, some think it is the right thing to do. At any rate, tools are meant to make a job easier, and I like to use various tools. If we consider the history of the world, if we all wanted to keep traditional practices, we would have never invented the wheel.  But as time progressed, people wanted convenience and efficiency, which then led to laziness. Wanting a more efficient way to do something is not inherently lazy.  That’s how I see any efficiency tools. A few days ago I found Devart SQL Complete.  It took less than a minute to install, and after installation it just worked without needing any tweaking.  Once I started using it I was impressed with how fast it formats SQL code – you can write down any terms or even copy and paste.  You can start typing right away, and it will complete keywords, object names, and fragmentations. It completes statement expressions.  How many times do we write insert, update, delete?  Take this example: to alter a stored procedure name, we don’t remember the code written in it, you have to write it over again, or go back to SQL Server Studio Manager to create and alter which is very difficult.  With SQL Complete , you can write “alter stored procedure,” and it will finish it for you, and you can modify as needed. I love to write code, and I love well-written code.  When I am working with clients, and I find people whose code have not been written properly, I feel a little uncomfortable.  It is difficult to deal with code that is in the wrong case, with no line breaks, no white spaces, improper indents, and no text wrapping.  The worst thing to encounter is code that goes all the way to the right side, and you have to scroll a million times because there are no breaks or indents.  SQL Complete will take care of this for you – if a developer is too lazy for proper formatting, then Devart’s SQL formatter tool will make them better, not lazier. SQL Management Studio gives information about your code when you hover your mouse over it, however SQL Complete goes further in it, going into the work table, and the current rate idea, too. It gives you more information about the parameters; and last but not least, it will just take you to the help file of code navigation.  It will open object explorer in a document viewer.  You can start going through the various properties of your code – a very important thing to do. Here are are interesting Intellisense examples: 1) We are often very lazy to expand *however, when we are using SQL Complete we can just mouse over the * and it will give us all the the column names and we can select the appropriate columns. 2) We can put the cursor after * and it will give us option to expand it to all the column names by pressing the Tab key. 3) Here is one more Intellisense feature I really liked it. I always alias my tables and I always select the alias with special logic. When I was using SQL Complete I selected just a tablename (without schema name) and…(just like below image) … and it autocompleted the schema and alias name (the way I needed it). I believe using SQL Complete we can work faster.  It supports all versions of SQL Server, and works SQL formatting.  Many businesses perform code review and have code standards, so why not use an efficiency tool on everyone’s computer and make sure the code is written correctly from the first time?  If you’re interested in this tool, there are free editions available.  If you like it, you can buy it.  I bought it because it works.  I love it, and I want to hear all your opinions on it, too. You can get the product for FREE.  Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Utility, T SQL, Technology

  Read the article

• Installer Reboots at "Detecting hardware" (disks and other hardware) on all recent Server Installs

  - by Ryan Rosario

  I have a very frustrating problem with my PC. I cannot install any recent version of Ubuntu Server (or even Desktop) since 9.04 even using the text-based installer. I boot from a USB stick created by Unetbootin (I also tried other methods such as startup disk creator with no difference). On the Server installer, it gets to "Detecting Hardware" (the second one about disks and all other hardware, not network hardware) and then either hangs at 0% (waited 24 hours), or reboots after a minute or two. My system (late 2007): ASUS P5NSLI motherboard Intel Core 2 Duo E6600 2.4Ghz 2 x 1GB Corsair 667MHz RAM nVidia GeForce 6600 I have unplugged everything (including the only hard disk, CD-ROMs and floppy). I have only one stick of RAM (tried each one to no avail) and am booting the installer from a USB stick (booting from CD-ROM yields the same problem). I also tried several of the boot options (nomodeset, nousb, acpi=off, noapic, i915.modeset=1/0, xforcevesa) in all combinations) to no avail. The only active parts of my system are the video card, mouse, keyboard and USB stick. I have also updated the BIOS to the most recent version. (FWIW, on the Desktop installer, I get a black screen after hitting the Install option.) Even after removing "quiet" I am unable to see what kernel panic is occurring (or not occurring) to cause the install to crash. I am only able to save the debug logs via a simple webserver in the installer. After the last line (I repeatedly refreshed), the server stops responding and the installer hangs or reboots: Jan 2 01:04:03 main-menu[302]: INFO: Menu item 'disk-detect' selected Jan 2 01:04:04 kernel: [ 309.154372] sata_nv 0000:00:0e.0: version 3.5 Jan 2 01:04:04 kernel: [ 309.154409] sata_nv 0000:00:0e.0: Using SWNCQ mode Jan 2 01:04:04 kernel: [ 309.154531] sata_nv 0000:00:0e.0: setting latency timer to 64 Jan 2 01:04:04 kernel: [ 309.164442] scsi0 : sata_nv Jan 2 01:04:04 kernel: [ 309.167610] scsi1 : sata_nv Jan 2 01:04:04 kernel: [ 309.167762] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd400 irq 10 Jan 2 01:04:04 kernel: [ 309.167774] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd408 irq 10 Jan 2 01:04:04 kernel: [ 309.167948] sata_nv 0000:00:0f.0: Using SWNCQ mode Jan 2 01:04:04 kernel: [ 309.168071] sata_nv 0000:00:0f.0: setting latency timer to 64 Jan 2 01:04:04 kernel: [ 309.171931] scsi2 : sata_nv Jan 2 01:04:04 kernel: [ 309.173793] scsi3 : sata_nv Jan 2 01:04:04 kernel: [ 309.173943] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xe800 irq 11 Jan 2 01:04:04 kernel: [ 309.173954] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xe808 irq 11 Jan 2 01:04:04 kernel: [ 309.174061] pata_amd 0000:00:0d.0: version 0.4.1 Jan 2 01:04:04 kernel: [ 309.174160] pata_amd 0000:00:0d.0: setting latency timer to 64 Jan 2 01:04:04 kernel: [ 309.177045] scsi4 : pata_amd Jan 2 01:04:04 kernel: [ 309.178628] scsi5 : pata_amd Jan 2 01:04:04 kernel: [ 309.178801] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 Jan 2 01:04:04 kernel: [ 309.178811] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 Jan 2 01:04:04 net/hw-detect.hotplug: Detected hotpluggable network interface eth0 Jan 2 01:04:04 net/hw-detect.hotplug: Detected hotpluggable network interface lo Jan 2 01:04:04 kernel: [ 309.485062] ata3: SATA link down (SStatus 0 SControl 300) Jan 2 01:04:04 kernel: [ 309.633094] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Jan 2 01:04:04 kernel: [ 309.641647] ata1.00: ATA-8: ST31000528AS, CC38, max UDMA/133 Jan 2 01:04:04 kernel: [ 309.641658] ata1.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 31/32) Jan 2 01:04:04 kernel: [ 309.657614] ata1.00: configured for UDMA/133 Jan 2 01:04:04 kernel: [ 309.657969] scsi 0:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5 Jan 2 01:04:04 kernel: [ 309.658482] sd 0:0:0:0: Attached scsi generic sg0 type 0 Jan 2 01:04:04 kernel: [ 309.658588] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) Jan 2 01:04:04 kernel: [ 309.658812] sd 0:0:0:0: [sda] Write Protect is off Jan 2 01:04:04 kernel: [ 309.658823] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Jan 2 01:04:04 kernel: [ 309.658918] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jan 2 01:04:04 kernel: [ 309.675630] sda: sda1 sda2 Jan 2 01:04:04 kernel: [ 309.676440] sd 0:0:0:0: [sda] Attached SCSI disk Jan 2 01:04:05 kernel: [ 309.969102] ata2: SATA link down (SStatus 0 SControl 300) Jan 2 01:04:05 kernel: [ 310.281137] ata4: SATA link down (SStatus 0 SControl 300) Anybody have any additional ideas I could try? I am getting ready to just toss the motherboard.

  Read the article

• SQL SERVER – Transcript of Learning SQL Server Performance: Indexing Basics – Interview of Vinod Kumar by Pinal Dave

  - by pinaldave

  Recently I just wrote a blog post on about Learning SQL Server Performance: Indexing Basics and I received lots of request that if we can share some insight into the course. Here is 200 seconds interview of Vinod Kumar I took right after completing the course. We have few free codes to watch the course, please your comment at http://facebook.com/SQLAuth and we will few of first ones, we will send the code. There are many people who said they would like to read the transcript of the video. Here I have generated the same. Pinal: Vinod, we recently released this course, SQL Server Indexing. It is about performance tuning. So tell me – how do indexes help performance? Vinod: I think what happens in the industry when it comes to performance is that developers and DBAs look at indexes first.  So that’s the first step for any performance tuning exercise, indexing is one of the most critical aspects and it is important to learn it the right way. Pinal: Correct. So what you mean to say is that if you know indexing you can pretty much tune any server and query. Vinod: So I might contradict my false statement now. Indexing is usually a stepping stone but it does not lead you to the end. But it’s good to start with indexing and there are lots of nuances to indexing that you need to understand, like how SQL uses indexing and how performance can improve because of the strategies that you have made. Pinal: But now I’m confused. First you said indexes are good, and then you said that indexes can degrade your performance.  So what is this course about?  I mean how does this course really make an impact? Vinod: Ok -so from the course perspective, what we are trying to do is give you a capsule which gives you a good start. Every journey needs a beginning, you need that first step.  This course is that first step in understanding. This is the most basic, fundamental course that we have tried to attack. This is the fundamentals of indexing, some of the key things that you must know about indexing.   Some of the basics of indexing are lesser known and so I think this course is geared towards each and every one of you out there who wants to understand little bit more about indexing. Pinal: So what I understand is that if I enrolled in this course I will have a minimum understanding about indexing when dealing with performance tuning.  Right? Vinod: Exactly. In this course is we have tried to give you a nice summary. We are talking about clustered indexing, non clustered indexing, too many indexes, too few indexes, over indexing, under indexing, duplicate indexing, columns tune indexing, with SQL Server 2012. There’s lot’s to learn. Pinal: You can see the URL [http://bit.ly/sql-index] of the course on the screen. Go ahead, attend, and let us know what you think about it. Thank you. Vinod: Thank you. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Index, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Technology, Video

  Read the article

• Clean Code: A Handbook of Agile Software Craftsmanship – book review

  - by DigiMortal

     Writing code that is easy read and test is not something that is easy to achieve. Unfortunately there are still way too much programming students who write awful spaghetti after graduating. But there is one really good book that helps you raise your code to new level – your code will be also communication tool for you and your fellow programmers. “Clean Code: A Handbook of Agile Software Craftsmanship” by Robert C. Martin is excellent book that helps you start writing the easily readable code. Of course, you are the one who has to learn and practice but using this book you have very good guide that keeps you going to right direction. You can start writing better code while you read this book and you can do it right in your current projects – you don’t have to create new guestbook or some other simple application to start practicing. Take the project you are working on and start making it better! My special thanks to Robert C. Martin I want to say my special thanks to Robert C. Martin for this book. There are many books that teach you different stuff and usually you have markable learning curve to go before you start getting results. There are many books that show you the direction to go and then leave you alone figuring out how to achieve all that stuff you just read about. Clean Code gives you a lot more – the mental tools to use so you can go your way to clean code being sure you will be soon there. I am reading books as much as I have time for it. Clean Code is top-level book for developers who have to write working code. Before anything else take Clean Code and read it. You will never regret your decision. I promise. Fragment of editorial review “Even bad code can function. But if code isn’t clean, it can bring a development organization to its knees. Every year, countless hours and significant resources are lost because of poorly written code. But it doesn’t have to be that way. What kind of work will you be doing? You’ll be reading code—lots of code. And you will be challenged to think about what’s right about that code, and what’s wrong with it. More importantly, you will be challenged to reassess your professional values and your commitment to your craft. Readers will come away from this book understanding How to tell the difference between good and bad code How to write good code and how to transform bad code into good code How to create good names, good functions, good objects, and good classes How to format code for maximum readability How to implement complete error handling without obscuring code logic How to unit test and practice test-driven development This book is a must for any developer, software engineer, project manager, team lead, or systems analyst with an interest in producing better code.” Table of contents Clean code Meaningful names Functions Comments Formatting Objects and data structures Error handling Boundaries Unit tests Classes Systems Emergence Concurrency Successive refinement JUnit internals Refactoring SerialDate Smells and heuristics A Concurrency II org.jfree.date.SerialDate Cross references of heuristics Epilogue Index

  Read the article

• EVENT RECAP: Oracle Day & Product Fair - Ft. Lauderdale

  - by cwarticki

  Are you attending any of the Oracle Days and other Events? They are fantastic!  Keep track of the Oracle Events by following @OracleEvents on Twitter.  Also, stay in the know by subscribing to one of the several Oracle Newsletters. Those will also keep you posted of upcoming in-person and webcast events. From the Oracle Events website, simply navigate to your geography and refine your options to locate what interests you. You can also perform keyword searches. Today, I had the opportunity to participate in the Oracle Day & Product Fair in Ft. Lauderdale, Florida  Thanks to those who stopped by to ask your support questions and watched me demo My Oracle Support features and best practices. (Bob Stanoch, Sales Consulting Manager giving the 2nd keynote address on Exadata below) Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} It was a pleasant surprise to run into my former Oracle colleague Josh Tieso.  Josh (pictured right) is Sr. Oracle DBA at United Healthcare. He used to work for Oracle Support years ago but for the last 6 years at UHC. Josh is a member of the ERP DBA team, working with Exalogic, Oracle ERP R12, & RAC. Along the exhibit/vendor row, I met with Marco Gangano, National Sales Manager at Mythics. It was great getting to meet Marco and I look forward to working with his company with regards to Support Best Practices. In addition, Lissette Paez (left) was representing TAM Training.  TAM Training is an Oracle University, award-winning training partner.  They cover training across the scope of Oracle products with 7 facilities in the U.S.  Lissette and I have done a couple of these Oracle Days before.  It's great to see familiar faces.  A little while ago, I was down in this area to work with Citrix with an onsite session on Support Best Practices.  Pablo Leon and Alberto Gonzalez (right)came to chat with me over at the Support booth.  They wanted to know when I was giving my session.  Unfortunately, not this time guys. I'm on booth duty only. Keep in touch. Many thanks to our sponsors: BIAS, Cloudera, Intel and TekStream Solutions.Come attend one of the many Oracle Days & other events planned for you. -Chris WartickiGlobal Customer Management

  Read the article

• Visual Studio &amp; TFS &ndash; List of addins, extensions, patches and hotfixes &ndash; Latest and Greatest

  - by terje

  This post is a list of the addins and extensions we (I ) recommend for use in Inmeta.  It’s coming up all the time – what to install, where are the download sites, etc etc, and thus I thought it better to post it here and keep it updated. The basics are Visual Studio 2010 connected to a Team Foundation Server 2010.  The edition of Visual Studio I use is the Ultimate Edition, but as many stay with the Premium Edition I’ve marked the extensions which only works with the Ultimate with a . I’ve also split the group into Recommended (which means Required) and Optional (which means Recommended) and Nice to Have (which means Optional) .   The focus is to get a setup which can be used for a complete coding experience for the whole ALM process.  The Code Gallery is found either through the Tools/Extension Manager menu in Visual Studio or through this link. The ones to really download is the Recommended category.  Then consider the Optional based on your needs.  The list of course reflects what I use for my work , so it is by no means complete, and for some of the tools there are equally useful alternatives.  The components directly associated with Visual Studio from Microsoft should be common, see the Microsoft column.     Product Available on Code Gallery Latest Version License Rec/Opt/N2H Applicable to Microsoft TFS Power Tools Sept 2010 Complete setup msi on link, split into parts on CG Sept 2010 Free Recommended TFS integration Yes Productivity Power Tools Yes 10.0.11019.3 Free Recommended Coding Yes Code Contracts No 1.4.30903 Free Recommended Coding & Quality Yes Code Contracts Editor Extensions Yes 1.4.30903 Free Recommended Coding & Quality Yes VSCommands Yes 3.6.4.1 Lite version Free (Good enough) Nice to have Coding No Power Commands Yes 1.0.2.3 Free Recommended Coding Yes FeaturePack 2   No.  MSDN Subscriber download under Visual Studio 2010 FP2 Part of MSDN Subscription Recommended Modeling & Testing Yes ReSharper No (Trial only) 5.1.1 Licensed Recommended Coding & Quality No dotTrace No 4.0.1 Licensed Optional Quality No NDepends No (Trial only) Licensed Optional Quality No tangible T4 editor Yes 1.950 Lite version Free (Good enough) Optional Coding (T4 templates) No Reflector No (Trial of Pro version only) 6.5 Lite version Free (Good enough) Recommended Coding/Investigation No LinqPad No 4.26.2 Licensed Nice to have Coding No Beyond Compare No 3.1.11 Licensed Recommended Coding/Investigation No Pex and Moles No (Moles available alone on CG) . Complete on MSDN Subscriber download under Visual Studio 2010 0.94.51023 Part of MSDN Subscription Optional Coding & Unit Testing Yes ApexSQL No Licensed Nice to have SQL No                 Some important Patches, upgrades and fixes Product Date Information Rec/Opt Applicable to Scrolling context menu KB2345133 and KB2413613 October 2010 Here Recommended Visual Studio MTM Patch October 2010 Here and here  KB2387011 Recommended (if you use MTM) MTM Data warehouse fix June 2010 Iteration dates fails with SQL 2008 R2.  KB2222312. Affects Burndown chart in Agile workbook Only for SQL 2008 R2 Server Upgrade 2008 to 2010 issue and hotfix August 2010 Fixes problems with labels and branches which are lost during upgrade. Apply before upgrade. Note: This has been fixed in the latest re-release of the TFS Server dated Aug 5th 2010. See here. Recommends downloading the latest bits. Only if upgrade from 2008 from earlier bits Server

  Read the article

• Add a Hovering Image Toolbar to Firefox

  - by Asian Angel

  When you work with webpage images in Firefox you normally have to use the Context Menu to do anything with them. The Image Toolbar extension provides an extra toolbar to use when you hover your mouse over webpage images. Note: This extension will not function if you have the NoScript extension installed/enabled unless JavaScript has permission to be active on that page. Before You can see the available “Context Menu” options for working with images here. Not bad but it would be nice if some other convenient options were available as well. Image Toolbar in Action Once you have installed the extension you will be able to view the toolbar whenever you hover your mouse over an image. All of the commands are active by default but you can choose what is available in the options. The toolbar will also appear in the upper left region of the image but can be set to appear relative to the cursor. Note: The default minimum image size for the toolbar to appear over is “260 x 260 pixels” so you will probably want to change it to a much smaller size (see options below). Here is what is available in the Image Toolbar: Save – Choose between being prompted when saving or automatically saving to a specified location Copy – Copies image and image URL so that you can paste the image or URL depending on the app pasted into Print – Provides print preview and printing capabilities Info – Opens a window with “properties information” about the image Folder – Opens browser’s download folder in Windows Explorer The “Save, Copy, Print, & Folder Commands” are all pretty clear in what you can expect from them but what about the “Info Command”? This is what you will see if you use the “Info Command” and expand the window out all the way. Very nice… Options There are quite a few options available for what appears to be such a small toolbar. The first “Tab Area” lets you set up the “Save Scheme” that best suits your personal needs. You can choose which commands are available in the toolbar, decide if you would like text labels visible, and enable small icons if desired. As mentioned above the default image size for the toolbar to appear is “260 x 260 pixels”…we set ours for “10 x 10 pixels”. If you would like the toolbar to appear relative to your mouse cursor as opposed to the upper left corner of the image then you can select for that here. Conclusion If you have been wanting more options for working with webpage images in Firefox then this will make a very useful and convenient addition to your browser. Links Download the Image Toolbar extension (Mozilla Add-ons) Similar Articles Productive Geek Tips Conserve Space in Firefox by Combining ToolbarsShow Alexa Ranking in FirefoxLightweight Extension to Show PageRank in FirefoxSwitch Windows by Hovering the Mouse Over a Window in Windows 7 or VistaQuick Tip: Show PageRank in Firefox while Google Toolbar is Hidden TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Roadkill’s Scan Port scans for open ports Out of 100 Tweeters Out of band Security Update for Internet Explorer 7 Cool Looking Screensavers for Windows SyncToy syncs Files and Folders across Computers on a Network (or partitions on the same drive) If it were only this easy

  Read the article

• UPK 3.6.1 (is Coming)

  - by marc.santosusso

  In anticipation of the release of UPK 3.6.1, I'd like to briefly describe some of the features that will be available in this new version. Topic Editor in Tabs Topic Editors now open in tabs instead of separate Developer windows. This offers several improvements: First, the bubble editor can be docked and resized in the same way as other editor panes. That's right, you can resize the bubble editor! The second enhancement that this changes brings is an improved undo and redo which allows each action to be undone and redone in the Topic Editor. New Sound Editor The topic and web page editors include a new sound editor with all the bells and whistles necessary to record, edit, import, and export, sound. Sound can be captured during topic recording--which is great for a Subject Matter Expert (SME) to narrate what they're recording--or after the topic has been recorded. Sound can also be added to web pages and played on the concept panes of modules, sections and topics. Turn off bubbles in Topics Authors may opt to hide bubbles either per frame or for an entire topic. When you want to draw a user's attention to the content on the screen instead of the bubble. This feature works extremely well in conjunction with the new sound capabilities. For instance, consider recording conceptual information with narration and no bubbles. Presentation Output UPK content can be published as a Presentation in Microsoft PowerPoint format. Publishing for Presentation will create a presentation for each topic published. The presentation template can be customized Using the same methods offered for the UPK document outputs, allowing your UPK-generated presentations to match your corporate branding. Autosave and Recovery The Developer will automatically save your work as often as you would like. This affords authors the ability to recover these automatically saved documents if their system or UPK were to close unexpectedly. The Developer defaults to save open documents every ten minutes. Package Editor Enhancement Files in packages will now open in the associated application when double-clicked. Authors can also choose to "Open with..." from the context menu (AKA right click menu.) See It! Window See It! mode may now be launched in a non-fullscreen window. This is available from the kp.html file in any Player package. This version of See It! mode offers on-screen navigation controls including previous frame, next frame, pause etc. Firefox Enhancments The UPK Player will now offer both Do It! mode and sound playback when viewed using Firefox web browser. Player Support for Safari The UPK Player is now fully supported on the Safari web browser for both Mac OS and Windows platforms. Keep document checked out Authors may choose to keep a document checked out when performing a check in. This allows an author to have a new version created on the server and continue editing. Close button on individual tabs A close button has been added to the tabs making it easier to close a specific tab. Outline Editor Enhancements Authors will have the option to prevent concepts from immediately displaying in the Developer when an outline item is selected. This makes it faster to move around in the outline editor. Tell us which feature you're most excited to use in the comments.

  Read the article

• &lsquo;Publish&hellip;&rsquo; Resulting in Directory With No Files

  - by ToStringTheory

  I was pulling my hair out with this one…  Which isn’t good considering I have so little of it left!  I had just upgraded to the Windows Azure 1.7 SDK the day before with no problems, and used the upgraded ‘Publish…’ dialog to successfully publish a website to my hard disk for hosting on an internal development server.  However, when trying to deploy another project to my file system, it said it was successful, but there were no files in the directory.  The only difference, the first project was an Azure project, the second was a standard ASP.Net Web Application.  If you installed the Windows Azure 1.7 SDK, you may want to read this. The Problem At first it appears that there is no problem: However you may remember that when publishing a web application, the output window will generally iterate through each of the directories as it copies the files from that directory over.  Sure enough, when looking at the output directory – there are no files, no bin directory, no nothing… Troubleshooting Since one site published and the other did not, I believed that the failure may have been to a failed SQL Server 2012 installation that happened between publish.  I rolled back the installation, however that did not work either.  I also checked the Configuration Manager dialog, and ensured that the projects were selected to actually build (just checking, even though the output said it built them..)  I checked the properties of the solution and the projects, and a selection of files in the project to make sure that they were selected for content…  Nothing seemed to work. I then decided to uninstall the Azure 1.7 SDK to see if that was the culprit.  When I opened the Windows 7 ‘Uninstall a Program’ dialog, I noticed that the Azure SDK came with 2 extra packages that just so happen to be in a Release Candidate state from Microsoft – ‘Microsoft Web Deploy 3.0’ and ‘Microsoft Web Publish – Visual Studio 2010’.  It dawned on me that the publish dialog must not be just for Azure, since it appeared when I tried to deploy the regular web application as well.  Therefore, it must have been an upgrade to the publish mechanism in Visual Studio.  I uninstalled both of the programs and received my old publish dialog once again, and was able to successfully publish the solution above as I had done before. After celebrating solving the problem, I tried reinstalling the Azure package, to see if it would repair the publishing process. Even though it brought back the updated dialogs, it did not publish any files. Instead of uninstalling and retreating, I now KNEW what the cause was, and these were packages not just for Azure. I now knew a product name to search for. The Solution Sure enough, with the correct search term in Google – ‘microsoft web publish no files’, and setting the timeline to 1 week, I found what I needed - Microsoft Connect - Publish Web Application FAILS! (by Andrew Rits). I am surprised that I missed something that ended up being so simple…  In the Configuration Manager, I had the following settings: This is how I had been building and debugging the solution always…  However, apparently when installing the new Web Publishing package, it does things a little differently in its configuration for publishing: You see the difference?  The configuration here is set to ‘x86’ instead of ‘Any CPU’.  Sure enough, as soon as I switched the configuration to ‘Release – Any CPU’, the deployment built and published all of my files as I expected. Conclusion It was a small change, but apparently the new ‘Publish web application’ defaults to the x86 configuration, thereby not copying any of the project/bin files to the publish target directory.  I spent forever trying things, but this small drop down eluded me until I was able to target that the dialog was actually working apparently, I just didn’t have the correct configuration. I hope that this saves you the hours of frustration and hastened hair loss that it caused me…  I also hope that before Microsoft brings this publishing package out of RC status, that they change the behavior of that menu to default to the settings of the old publish menu for the first time. Happy Coding!

  Read the article

• Interviews Gone Bad.....Now What Do I Do?

  - by david.talamelli

  We have all done it at some stage of our working careers - you know those times when you leave an interview and then you think to yourself "why didn't I ask that question" or "I can't believe I said that" or "how could I have forgotten to say that". It happens to everyone but how you handle things moving forwards could be critical in helping you land that dream job. There is nothing better than seeing that dream job with the dream company that you are looking to work for advertised (or in some cases getting called by the Recruiter to let you know about that job). The role may seem perfect and it could be just what you are looking for and it is with the right company as well. You have sent in your resume and have subsequently had one, two or maybe three interviews for the role. After each step of the process you get a little bit more excited about the role as you start to think about your work day in your new role/company. Then it happens, you get it: you get The Phone Call to inform you that you have not been successful in securing the position that you have invested so much time and effort into. It can be disappointing to hear this news but what you do next is important in potentially keeping that door open for future opportunities with that company. How you handle yourself in this situation is important: if any of you remember the Choose Your Own Adventure Books do you: Tell the Recruiter (maybe get aggressive) they are wrong in their assessment and that you are the right candidate for the role Switch off and say ok thanks and hang up without engaging in any further dialogue Thank the company for their time and enquire if there may be any other opportunities in the future to explore If you chose the first option - the company in question may consider whether or not to look at you for other opportunities. How you handle yourself in the recruitment process could be an indication of how you would deal with clients/colleagues in your role and the impression that you leave a potential employer may be what sticks in their mind when they think of you (eg: isn't that the person who couldn't handle it when we told him he wasn't right for our role). The second option potentially produces a similar outcome. If you rush to get off the phone, the company may come back to you to talk about other roles when they come up, but you also leave open the potential thought with the company you were only interested in that role and therefore not interested in any other opportunities. Why take the risk of the company thinking that and potentially not getting back to you in the future. By picking the third option, you actively engage with the company and keep the dialogue open for future discussions. Ok, so you didn't get the role you interviewed for - you don't know who else the company may have been interviewing - maybe they found someone who was a better fit, or maybe there were too many boxes you didn't tick to step straight into that specific role. Take a deep breath and keep the company engaged. You are fresh in their mind - take advantage of that fact and let them know that while you respect their decision, that you are still interested in the company and would like to be kept in mind for future roles. Ask if it is ok to keep in touch and when they would like to keep in touch, as long as you are interested let them know you are still interested. You do need to balance that though if you come across as too keen or start stalking people - it could equally damage your brand. Companies normally have more than one open role. New roles are created all the time, circumstances change and hiring people is not a static business, it changes course from everyone's best laid initial plans. If you didn't get that initial role you wanted, keep the door open with that company so that when those new roles do come up or when circumstances do change you have already laid the ground to step into those new positions.

  Read the article

• SQL SERVER – Top 10 “Ease of Use” Features of expressor Studio

  - by pinaldave

  expressor Studio is new data integration platform that is being marketed as the most easy to use tool of its kind.  But “easy to use” can be a relative term – an expert can find a very complex system easy, but a beginner might be stumped.  A recent article online discussed exactly what makes expressor Studio so easy use, and here is my view on this subject. Simple Installation There is one pop-up for one .exe file, and nothing more.  You can’t get much simpler than this.  It is also in the familiar Windows design, so there should be no surprises. No 3rd party software dependency Have you ever tried to download software, only to be slowed down by the need to download a compatible system to run the program, and another to read the user manual, and so on?  expressor Studio was designed specifically to avoid this problem. Microsoft Office Like Ribbon Bar and Menus As mentioned before, everything is in the familiar Windows design, from the pop up windows to the tool bars and menus.  There should be no learning curve for using this program, or even simply trying to navigate around a new system. General Development Design Interface This software has been designed to be simple and straightforward.  Projects can be arranged in a simple “tree” design, that is totally collapsible and can easy be added to or “trimmed” with a click of a button.  It was meant to be logical and easy to follow. Integrated Contextual Help This is a fancy way of saying that you can practically yell “help!” if you do get stuck on something.  Solving a problem is as simple as highlighting and hitting F1 for contextual help. Visual Indicators and Messages Wouldn’t it be nice to know exactly where something has gone wrong before trying to complete a project.  expressor Studio has a built in system to catch mistakes and highlight them in a bright color, flash a warning message, and even disable functions before you can continue – and possibly lose hours of work. Property Inputs and Selectors Every operator will have a list of requirements that need to be filled in.  But don’t worry; you won’t have to make stuff up to fill in the boxes.  Each one will have a drop-down menu with options to choose from – but not too many as to be confusing. Connection Wizards Configuring connections can be the hardest part of a project.  But not with the expressor Studioconnection wizard.  A familiar, Windows-style menu will walk you through connections so quickly you’ll forget what trouble it used to be. Templates With large, complex projects, a majority of your time is often spent simply setting up the files and inputting data.  But expressor Studio allows you to create one file and then save it as a template, saving you hours of boring data input. Extension Manager Let’s say that you need a little more functionality or some new features on your program. A lot of software requires you to download complex plug-ins that need to be decompressed and installed.  However, expressor Studio has extended its system to an Extension Manager, which allows for quick and easy installation of the functionality you need, without the need to download and decompress. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Utility, T SQL, Technology

  Read the article

• Major Analyst Report Chooses Oracle As An ECM Leader

  - by brian.dirking(at)oracle.com

  Oracle announced that Gartner, Inc. has named Oracle as a Leader in its latest "Magic Quadrant for Enterprise Content Management" in a press release issued this morning. Gartner's Magic Quadrant reports position vendors within a particular quadrant based on their completeness of vision and ability to execute. According to Gartner, "Leaders have the highest combined scores for Ability to Execute and Completeness of Vision. They are doing well and are prepared for the future with a clearly articulated vision. In the context of ECM, they have strong channel partners, presence in multiple regions, consistent financial performance, broad platform support and good customer support. In addition, they dominate in one or more technology or vertical market. Leaders deliver a suite that addresses market demand for direct delivery of the majority of core components, though these are not necessarily owned by them, tightly integrated, unique or best-of-breed in each area. We place more emphasis this year on demonstrated enterprise deployments; integration with other business applications and content repositories; incorporation of Web 2.0 and XML capabilities; and vertical-process and horizontal-solution focus. Leaders should drive market transformation." "To extend content governance and best practices across the enterprise, organizations need an enterprise content management solution that delivers a broad set of functionality and is tightly integrated with business processes," said Andy MacMillan, vice president, Product Management, Oracle. "We believe that Oracle's position as a Leader in this report is recognition of the industry-leading performance, integration and scalability delivered in Oracle Enterprise Content Management Suite 11g." With Oracle Enterprise Content Management Suite 11g, Oracle offers a comprehensive, integrated and high-performance content management solution that helps organizations increase efficiency, reduce costs and improve content security. In the report, Oracle is grouped among the top three vendors for execution, and is the furthest to the right, placing Oracle as the most visionary vendor. This vision stems from Oracle's integration of content management right into key business processes, delivering content in context as people need it. Using a PeopleSoft Accounts Payable user as an example, as an employee processes an invoice, Oracle ECM Suite brings that invoice up on the screen so the processor can verify the content right in the process, improving speed and accuracy. Oracle integrates content into business processes such as Human Resources, Travel and Expense, and others, in the major enterprise applications such as PeopleSoft, JD Edwards, Siebel, and E-Business Suite. As part of Oracle's Enterprise Application Documents strategy, you can see an example of these integrations in this webinar: Managing Customer Documents and Marketing Assets in Siebel. You can also get a white paper of the ROI Embry Riddle achieved using Oracle Content Management integrated with enterprise applications. Embry Riddle moved from a point solution for content management on accounts payable to an infrastructure investment - they are now using Oracle Content Management for accounts payable with Oracle E-Business Suite, and for student on-boarding with PeopleSoft e-Campus. They continue to expand their use of Oracle Content Management to address further use cases from a core infrastructure. Oracle also shows its vision in the ability to deliver content optimized for online channels. Marketers can use Oracle ECM Suite to deliver digital assets and offers as part of an integrated campaign that understands website visitors and ensures that they are given the most pertinent information and offers. Oracle also provides full lifecycle management through its built-in records management. Companies are able to manage the lifecycle of content (both records and non-records) through built-in retention management. And with the integration of Oracle ECM Suite and Sun Storage Archive Manager, content can be routed to the appropriate storage media based upon content type, usage data or other business rules. This ensures that the most accessed content is instantly available, and archived content is stored on a more appropriate medium like tape. You can learn more in this webinar - Oracle Content Management and Sun Tiered Storage. If you are interested in reading more about why Oracle was chosen as a Leader, view the Gartner Magic Quadrant for Enterprise Content Management.

  Read the article

• NServiceBus Generic Host and mqsvc.exe high CPU

  - by Michael Stephenson

  We have been doing some work with NServiceBus recently and observed some unusual behaviour which was caused by our mistake and seemed worthy of a small post.   The Scenario In our solution we were doing some standard NServiceBus stuff by pushing a message to a queue using NServiceBus.  We had a direct send/receive scenario rather than a publish/subscribe one.   The background process which was meant to collect the message and then process it was a normal NServiceBus message handler.  We would run the NServiceBus.Host.exe which would find the handler and then do the usual NServiceBus magic.   The Problem In this solution we were creating some automated tests around this module of the integration process to ensure that it would work well.  We had two tests.   Test 1 This test would start NServiceBus.Host.exe using the Process object, then seed a message to the queue via our web service façade sitting above the queue which wrapped NServiceBus.  The background process would then process the message and the test would check the message had been processed fine.   If all was well then the NServiceBus.Host.exe process was stopped.   Test 2 In test 2 we would do a very similar thing except that instead of starting the process the test would install NServiceBus.Host.exe as a windows service and then start the service before the test and once the test was executed it would stop the test.   The Results of the Tests Test 1 worked really well, however in test 2 we found that it didn’t really work at all, instead of doing the background process we were finding that between mqsvc.exe and NServiceBus.Host.exe the CPU on the machine was maxed and nothing was really happening.   The Solution After trying a few things we found it was the permissions on the queue were not set correctly.  Once this was resolved it all worked fine and CPU was not excessive and ran just like the console application.   I think the couple of take aways from this are:   Make sure you set the windows service for NserviceBus Generic Host to the right credentials When you install the generic host as a windows service then by default it will use the default windows credentials.  For any production like scenario you should be using a domain account to run the process as via the windows service. Make sure you have the queue set with the right permissions For the credentials you have used to configure the generic host as a windows service you should ensure that this user has the appropriate permissions for any queues it will interact with. Make sure you turn on the right logging configuration in NServiceBus When this wasnt working correctly we didnt know there was an issue, we were just experiencing the high CPU condition.  I am a little surprised that there wasnt something logged and that the process didnt crash.  I guess this could be by design bearing in mind that the process could be monitoring many queues.  In this point Im just saying that originally we didnt have all of the log4net logging which is available from NServiceBus turned on.  Its probably a good idea to have this turned on and configured until you are happy your solution is working fine.   Thanks to Ahmed Hashmi on my team who got this working in the end.

  Read the article

• Upgrade Office 2003 to 2010 on XP or Run them Side by Side

  - by Mysticgeek

  If you’re still running XP, currently have Office 2003 installed on your machine, and skipped Office 2007, you might want to upgrade to Office 2010. In this guide we will show you the upgrade process or how to run them side by side. In this example we are upgrading from Office 2003 Standard to Office Professional Plus 2010 RTM (Final) on XP Professional. System Requirements To run Office 2010 on your XP machine you have to make sure you have Service Pack 3 and Microsoft Silverlight installed (links below). Or you can just install them through Windows Update. Recommended Hardware 1GHZ CPU or higher 512 MB of RAM or higher 1024×768 Resolution or higher DirectX 9.0c compatible graphics card with 64 MB of memory or higher Installing Office 2010 Simply kick off the Office Professional Plus 2010 installation. Enter in your product key… Agree to the EULA…   Select the Customize button… Setup will detect Office 2003 and allow you to remove all applications, keep them, or select only the ones you want to keep. In this example we’re going to remove Excel and PowerPoint, and keep Outlook and Word 2003. Next, click the Installation Options tab and select Office programs you want to install. Since we’re keeping Outlook 2003 and don’t want to use Outlook 2010, we’re making sure not to install Outlook 2010. However, we want to run Word 2003 and 2010 on the same machine. After you’ve made your selections click the Upgrade button. The installation begins and you’re shown the progress. The amount of time it takes to install will vary between systems. Installation is complete and you can close out of the installer. Now when you go into the Start menu under Microsoft Office, you’ll see both versions of the Office apps available. Here is a shot of Word 2003 and 2010 running together on our XP machine.   Conclusion If you’re moving from Office 2003 to 2010, this allows you to install both versions side by side. It gives you a chance to learn 2010 features, and still work in the familiar 2003 environment when you need to get things done quickly. If you’re having problems installing Office 2010 make sure to check out our article on how to fix problems upgrading Office 2010 beta to RTM (Final) release. Also, if you were using Office 2007 and are currently using the 2010 beta, we have a guide on how to switch back to Office 2007 after the 2010 beta ends. Links XP Service Pack 3 Microsoft Silverlight Details on Office 2010 System Requirements Similar Articles Productive Geek Tips Add Word/Excel 97-2003 Documents Back to the "New" Context Menu After Installing Office 2007Make Word 2007 Always Save in Word 2003 FormatMake Excel 2007 Always Save in Excel 2003 FormatRemove Office 2010 Beta and Reinstall Office 2007How to Find Office 2003 Commands in Office 2010 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Enable or Disable the Task Manager Using TaskMgrED Explorer++ is a Worthy Windows Explorer Alternative Error Goblin Explains Windows Error Codes Twelve must-have Google Chrome plugins Cool Looking Skins for Windows Media Player 12 Move the Mouse Pointer With Your Face Movement Using eViacam

  Read the article

• Silverlight Cream for February 22, 2011 -- #1050

  - by Dave Campbell

  In this Issue: Robby Ingebretsen, Victor Gaudioso, Andrea Boschin(-2-), Rudi Grobler(-2-), Michael Crump, Deborah Kurata, Dennis Delimarsky, Pete Vickers, Yochay Kiriaty, Peter Kuhn, WindowsPhoneGeek, and Jesse Liberty(-2-). Above the Fold: Silverlight: "Silverlight Simple MVVM Printing" Deborah Kurata WP7: "Creating theme friendly UI in WP7 using OpacityMask" WindowsPhoneGeek Tools: "KAXAML v1.8" Robby Ingebretsen Shoutouts: Peter Foot posted Silverlight for Windows Phone Toolkit–Feb 2011 Rudi Grobler posts his top requested features for WP7, Silverlight, and WCF: vNext ... see you in Seattle, Rudi! From SilverlightCream.com: KAXAML v1.8 Robby Ingebretsen just posted KAXML v1.8 that now supports .NET 4.0, WPF, and Silferlight4 ... go grab it. Learn how to use Blend to create a Data Store, Add Properties to it, etc... Victor Gaudioso has 3 new Silverlight and/or Expression Blend video tutorials up... first is this one on Creating a Data store, adding properties to it, oh... read the title :), Next up is: Send async messages across UserControls or even applications, followed by the latest: Create a Sketchflow Animation using the Sketchflow Animation Panel A base class for threaded Application Services Andrea Boschin continues his IApplicationServices series with this one on a base class he created to develop Application Services that runs a thread. Windows Phone 7 - Part #6: Taking advantage of the phone Andrea Boschin also has part 6 of his series at SilverlightShow on WP7... this one is covering a bunch of items... Capabilities, Launchers/Choosers, and gestures... plus the source for a fun game. {homebrew} Skype for WP7 Rudi Grobler posted about the availability of (some features of) Skype for WP7 being available. The XDA guys have working contacts and the ability to chat going, plus they're looking for poeple to join in... Follow Rudi's link, and let them know you're up for it! Simple menu for your WP7 application Rudi Grobler has another post up about a very simple menu control for WP7 that he produced that is also very easy to use. Attaching a Command to the WP7 Application Bar Michael Crump shows how to bind the application bar to a Relay Command with the use of MVVMLight in 7 Easy Steps :) Silverlight Simple MVVM Printing Deborah Kurata continues her MVVM series with this one on printing what your user sees on the page... but doing so within the MVVM pattern. Enhancing the general Zune experience on Windows Phone 7 with Zune web API Dennis Delimarsky apparently likes the Zune as much as I do, and has ratted out tons of information about the Zune API for use in WP7 apps... and lots of code... Validating input forms in Windows Phone 7 Pete Vickers takes a great detailed spin through validation on the WP7... the rules have changed, but Pete explains with some code examples. Windows Phone Shake Gestures Library Yochay Kiriaty discusses Shake Gestures for the WP7 device and then describes the "Windows Phone Shake Gesture Library" that detects shake gestures in 3D space... and after a great description has the link for downloading. What difference does a sprite sheet make? Peter Kuhn is writing a series at SilverlightShow on XNA for Silverlight Devs that I've highlighted. An outshoot of that is this discussion of the use of sprite sheets and game development. Creating theme friendly UI in WP7 using OpacityMask WindowsPhoneGeek has a new post up today on using Opacity Masks in WP7 to enable using one set of icons for either the dark or light theme.. too cool, you'll wanna check this out! Linq to XML Jesse Liberty continues with Linq with regard to WP7 with this post on Linq to XML... and why XML? crap... I was just saving/loading XML today! :) Lambda–Not as weird as it sounds Jesse Liberty then jumps into Lambda expressions... maybe it's a chance for me to learn WTF the lambdas really do that I use all the time! Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Kanban Tools Review

  - by GeekAgilistMercenary

  The first two sessions on Sunday were Collaboration and why it is so hard and the following, which was a perfect following session was on Kanban.  While in that second session two online Saas Style Tools were mentioned; AgileZen and Leankit.  I decided right then and there that I would throw together some first impressions and setup some sample projects.  I did this by setting up an account and creating the projects. Agile Zen Account Creation Setting up the initial account required an e-mail verification, which is understandable.  Within a few seconds it was mailed out and I was logged in. Setting Up the Kanban Board The initial setup of the board was pretty easy.  I maybe clicked around an extra few times, but overall everything I needed to use the tool was immediately available.  The representation of everything was very similar to what one expects in a real Kanban Board too.  This is a HUGE plus, especially if a team is smart and places this tool in a centrally viewable area to allow for visibility. Each of the board items is just like a post it, being blue, grey, green, pink, or one of another few colors.  Dragging them onto each swim lane on the board was flawless, making changes through the work super easy and intuitive. The other thing I really liked about AgileZen is that the Kanban Board had the swim lanes setup immediately.  One can change them, but when you know you immediately need a Ready Lane, Working Lane, and a Complete Lane it is nice to just have them right in front of you in the interface.  In addition, the Backlog is simply a little tab on the left hand side.  This is perfect for the Backlog Queue.  Out of the way, with the focus on the primary items. Once  I got the items onto the board I was easily able to get back to the actual work at hand versus playing around with the tool.  The fact that it was so easy to use, fast and easy UX, and overall a great layout put me back to work on things I needed to do versus sitting a playing with the tool.  That, in the end is the key to using these tools. LeanKit Kanban Account Creation Setting up the account got me straight into the online tool.  This I thought was pretty cool. Setting Up the Kanban Board Setting up the Kanban Board within Leankit was a bit of trouble.  There were multiple UX issues in regard to process and intuitiveness.  The Leankit basically forces one to design the whole board first, making no assumptions about how the board should look.  The swim lanes in my humble opinion should be setup immediately without any manipulation with the most common lanes;  ready, working, and complete. The other UX hiccup that I had a problem with is that as soon as I managed to get the swim lanes into place, I wanted to remove the redundant Backlog Lane.  The Backlog Lane, or Backlog Bucket should be somewhere that I accidentally added as a lane.  Then on top of that I screwed up and added an item inside the lane, which then prevented me from deleting the lane.  I had to go back out of the lane manipulation, remove the item, and then remove the excess lane.  Summary Leankit wasn't a bad interface, it just wasn't as good as AgileZen.  The AgileZen interface was just better UX design overall.  AgileZen also presents a much better user interface graphical design all together.  It is much closer to what the Kanban Board would look like if it were a physical Kanban Board.  Since one of the HUGE reasons for Kanban is to increase visibility, the fact the design is similar to what a real Kanban Board is actually a pretty big deal. This is an image (click for larger) that shows the two Kanban Boards side by side.  The one on the left is AgileZen and the right is Leankit. Original Entry

  Read the article

• Clone a Hard Drive Using an Ubuntu Live CD

  - by Trevor Bekolay

  Whether you’re setting up multiple computers or doing a full backup, cloning hard drives is a common maintenance task. Don’t bother burning a new boot CD or paying for new software – you can do it easily with your Ubuntu Live CD. Not only can you do this with your Ubuntu Live CD, you can do it right out of the box – no additional software needed! The program we’ll use is called dd, and it’s included with pretty much all Linux distributions. dd is a utility used to do low-level copying – rather than working with files, it works directly on the raw data on a storage device. Note: dd gets a bad rap, because like many other Linux utilities, if misused it can be very destructive. If you’re not sure what you’re doing, you can easily wipe out an entire hard drive, in an unrecoverable way. Of course, the flip side of that is that dd is extremely powerful, and can do very complex tasks with little user effort. If you’re careful, and follow these instructions closely, you can clone your hard drive with one command. We’re going to take a small hard drive that we’ve been using and copy it to a new hard drive, which hasn’t been formatted yet. To make sure that we’re working with the right drives, we’ll open up a terminal (Applications > Accessories > Terminal) and enter in the following command sudo fdisk –l We have two small drives, /dev/sda, which has two partitions, and /dev/sdc, which is completely unformatted. We want to copy the data from /dev/sda to /dev/sdc. Note: while you can copy a smaller drive to a larger one, you can’t copy a larger drive to a smaller one with the method described below. Now the fun part: using dd. The invocation we’ll use is: sudo dd if=/dev/sda of=/dev/sdc In this case, we’re telling dd that the input file (“if”) is /dev/sda, and the output file (“of”) is /dev/sdc. If your drives are quite large, this can take some time, but in our case it took just less than a minute. If we do sudo fdisk –l again, we can see that, despite not formatting /dev/sdc at all, it now has the same partitions as /dev/sda.  Additionally, if we mount all of the partitions, we can see that all of the data on /dev/sdc is now the same as on /dev/sda. Note: you may have to restart your computer to be able to mount the newly cloned drive. And that’s it…If you exercise caution and make sure that you’re using the right drives as the input file and output file, dd isn’t anything to be scared of. Unlike other utilities, dd copies absolutely everything from one drive to another – that means that you can even recover files deleted from the original drive in the clone! Similar Articles Productive Geek Tips Reset Your Ubuntu Password Easily from the Live CDHow to Browse Without a Trace with an Ubuntu Live CDRecover Deleted Files on an NTFS Hard Drive from a Ubuntu Live CDCreate a Bootable Ubuntu 9.10 USB Flash DriveWipe, Delete, and Securely Destroy Your Hard Drive’s Data the Easy Way TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Windows Media Player Glass Icons (icons we like) How to Forecast Weather, without Gadgets Outlook Tools, one stop tweaking for any Outlook version Zoofs, find the most popular tweeted YouTube videos Video preview of new Windows Live Essentials 21 Cursor Packs for XP, Vista & 7

  Read the article

• Non-standard installation (installing Linux from Linux)

  - by Evan Plaice

  So, here's my setup. I have one partition with the newest version installed, a second partition with an older version installed (as a backup just in case), a swap partition that both share, and a boot partition so the bootloader doesn't need to be setup after each upgrade. Partitions: sda1 ext3 /boot sda2 ext4 / (current version) sda3 ext4 / (old version) sda4 swap /swap sda5 ntfs (contains folders symbolically linked to /home on /) So far it has been a very good setup. I can create new boot loaders without screwing it up and adding my personal files into a new install is as simple as creating some symbolic links (the partition is NTFS in case I need to load windows on the system again). Here's the issue. I'd like to be able to drop the install into /distro on the current version and install a new version on / on the old version effectively replacing/upgrading it. The goal is to be able to just swap out new versions as they are released while maintaining redundancy in case I don't like th update. So far I have: downloaded the install.iso created a folder in /distro copied the install.iso into /distro extracted vmlinuz and initrd.lz into /distro Then I modified /boot/grub/menu.lst with the following entry: title Install Linux root (hd0,1) kernel /distro/vmlinuz initrd /distro/initrd.lz vmlinuz loads perfectly but it says it can't find initrd.lz on boot. I have also tried to uncompress the image with: unlzma < initrd.lz > initrd.img And, updating the menu.lst file to match; but that doesn't work either. I'm assuming that vmlinuz (linux kernel) loads, fires up the virtual filesystem by creating a ramdisk (initrd), mounts the iso, and launches the installer. Am I missing something here? Update: First, I wanted to say that the accepted answer would have been the best option if I was doing a normal Ubuntu install. Unfortunately, I was installing Linux Mint (which lacks the script needed to make debootstrap work. So the problem I with the above approach was, I was missing the command that vmlinuz (linux kernel) needed to execute to start boot into LiveCD mode. By looking in the /boot/grub/grub.cfg file I found what I was missing. Although this method will work, it requires that the installation files reside on their own partition. I took the easy route and used unetbootin to drop the LiveCD on a usb drive and booted from that. Like I said before. Debootstrap would have been the ideal solution here. Even though I couldn't use it I wrote down the steps it would've taken to use it. Step One: Format sda3 (the partition with the old copy of linux that's being overwritten) I used gparted to format it as ext4 from within the current linux install. How this is done varies based on what tools you prefer to use. Step Two: Mount the newly formatted partition (we'll call the mount ubuntu for simplicity) sudo mkdir /mnt/ubuntu sudo mount -o -loop /dev/sda3 /mnt/ubuntu Step Three: Get debootstrap sudo apt-get install debootstrap Step Four: Mount the install disk (replace ubuntu.iso with the name if your install disk) sudo mkdir /media/cdrom sudo mount -o loop ~/ubuntu.iso /media/cdrom Step Five: Install the OS using debootstrap (replace fiesty with the version you're installing and amd64 with your processor's architecture) sudo debootstrap --arch amd64 fiesty /mnt/ubuntu file:/media/cdrom The settings here varies. While I loaded debootstrap using an install iso, you can also have debootstrap automatically download and install if with a repository link (While most of these repositories contain debian versions I'm still not clear as to whether Ubuntu has similar repositories). Here a list of the debian package repositories and their mirrors. This is how you'd deploy debootstrap if you were doing it directly from a repository: sudo debootstrap --arch amd64 squeeze /mnt/debian http://ftp.us.debian.org/debian Here's the link that I primarily used to figure this out.

  Read the article

• RTL (Arabic and Hebrew) Support for Windows Phone 7

  - by Daniel Moth

  Problem and Background Currently there is no support for Right-To-Left rendering in Windows Phone 7, when developing with Silverlight (itself built on .NET Compact Framework). When I encountered that limitation, I had a flashback to 2005 when I complained about the luck of RTL on NETCF. Unfortunately, the partial solution I proposed back then requires PInvoke and there is no such support on Windows Phone today. Fortunately, my RTL requirements this time were more modest: all I wanted to do was display correctly a translation (of Hebrew or Arabic) in my FREE WP7 translator app. For v1.0 of the app, the code received a string from the service and just put it up on the screen as the translated text. In Arabic and Hebrew, that string (incorrectly) appeared reversed. I knew that, but decided that since it is a platform limitation, I could live with it and so could the users. Yuval P, a colleague at Microsoft, pushed me to offer support for Hebrew (something that I wasn't motivated to pursue if I am honest). After many back and forths, we landed on some code that works. It is certainly not the most efficient code (quite the opposite), but it works and met the bar of minimum effort for v1.1. Thanks Yuval for insisting and contributing most of the code! After Hebrew support was there, I thought the same solution would work for Arabic. Apparently, reversing the Arabic text is not enough: Arabic characters render themselves differently dependent on what preceded/succeeds them(!). So I needed some kind of utility that takes a reversed Arabic string and returns the same string but with the relevant characters "fixed". Luckily, another MS colleague has put out such a library (thanks Bashar): http://arabic4wp7.codeplex.com/. RTL Solution So you have a reversed RTL string and want to make it "right" before displaying on the screen. This is what worked for me (ymmv). Need to split the string into "lines". Not doing this and just reversing the string and sticking it a wrapping text control means that the user not only has to read right to left, they also have to read bottom up. The previous step must take into account a line length that works for both portrait and landscape modes, and of course, not break words in the middle, i.e. find natural breaks. For each line, break it up into words and reverse the order of the words and the order of the letters within each word On the previous step, do not reverse words that should be preserved, e.g. Windows and other such English words that are mixed in with the Arabic or Hebrew words. The same exclusion from reversal applies to numbers. Specifically, for Arabic, once there is a word that is reversed also change its characters. For some code paths, the above has to take into account whether the translation is "from" an RTL language or if it is "to" an RTL language. I packaged the solution in a single code file containing a static class (see the 'Background" section above for… background and credits). Download RTL.cs for your Windows Phone app (to see its usage in action download for FREE "The best translator app") Enjoy, and if you decide to improve on the code, feel free to share back with me… Comments about this post welcome at the original blog.

  Read the article

• Using Managed Beans with your ADF Mobile Client Applications

  - by [email protected]

  Did you know it's easy to extend your ADF Mobile Client application with a Managed Bean just like it is with an ADF web application?  Here's how: Using the New Gallery (File -> New), create a new Java class.  This class should extend oracle.adfnmc.el.utils.BeanResolver.         Add this java class as a managed bean: Go to your task flow, select the Overview tab at the bottom and go to the Managed Bean section.  Add an entry and name your new Managed Bean and point to the java class you just created.        Add your custom methods and properties to your java class   Since reflection is not supported in the J2ME version on some platforms (BlackBerry), you need to provide dispatch code if you want to invoke/access any of your methods/properties from EL.  Here's a sample:  MyBeanClass.java    Use Expression Language (EL) to access your properties and invoke your methods on your MCX pages.  Here's an sample:     <?xml version="1.0" encoding="UTF-8" ?><amc:view xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"          xmlns:amc="http://xmlns.oracle.com/jdev/amc">  <amc:form id="form0">    <amc:menuControl refId="menu0"/>    <amc:panelGroupLayout id="panelGroupLayout1" width="100%">      <amc:panelGroupLayout id="panelGroupLayout2" layout="horizontal"                            width="100%">        <amc:image id="image1" source="logo_sm.png"/>        <amc:outputText value="Home" id="outputText1" verticalAlign="center"                        fontSize="20" fontWeight="bold"                        foregroundColor="#ff0000"/>      </amc:panelGroupLayout>      <amc:commandLink text="#{MyBean.property1}" id="commandLink1"                       actionListener="#{MyBean.doFoo}"                       foregroundColor="#0000ff" action="patientlist"/>    </amc:panelGroupLayout>  </amc:form>  <amc:menu type="main" id="menu0">    <amc:menuGroup id="menuGroup1">      <amc:commandMenuItem id="commandMenuItem1" action="exit" label="Exit"                           index="1" weight="0"/>    </amc:menuGroup>  </amc:menu></amc:view> 

  Read the article

• SQLAuthority News – Monthly list of Puzzles and Solutions on SQLAuthority.com

  - by pinaldave

  This month has been very interesting month for SQLAuthority.com we had multiple and various puzzles which everybody participated and lots of interesting conversation which we have shared. Let us start in latest puzzles and continue going down. There are few answers also posted on facebook as well. SQL SERVER – Puzzle Involving NULL – Resolve – Error – Operand data type void type is invalid for sum operator This puzzle involves NULL and throws an error. The challenge is to resolve the error. There are multiple ways to resolve this error. Readers has contributed various methods. Few of them even have supplied the answer why this error is showing up. NULL are very important part of the database and if one of the column has NULL the result can be totally different than the one expected. SQL SERVER – T-SQL Scripts to Find Maximum between Two Numbers I modified script provided by friend to find greatest number between two number. My script has small bug in it. However, lots of readers have suggested better scripts. Madhivanan has written blog post on the subject over here. SQL SERVER – BI Quiz Hint – Performance Tuning Cubes – Hints This quiz is hosted on my friend Jacob‘s site. I have written many hints how one can tune cubes. Now one can take part here and win exciting prizes. SQL SERVER – Solution – Generating Zero Without using Any Numbers in T-SQL Madhivanan has asked very interesting question on his blog about How to Generate Zero without using Any Numbers in T-SQL. He has demonstrated various methods how one can generate Zero. I asked the same question on blog and got many interesting answers which I have shared. SQL SERVER – Solution – Puzzle – Statistics are not Updated but are Created Once I have to accept that this was most difficult puzzle. In this puzzle I have asked even though settings are correct, why statistics of the tables are not getting updated. In this puzzle one is tested with various concepts 1) Indexes, 2) Statistics, 3) database settings etc. There are multiple ways of solving this puzzles. It was interesting as many took interest but only few got it right. SQL SERVER – Question to You – When to use Function and When to use Stored Procedure This is rather straight forward question and not the typical puzzle. The answers from readers are great however, still there is chance of more detailed answers. SQL SERVER – Selecting Domain from Email Address I wrote on selecting domains from email addresses. Madhivanan makes puzzle out of a simple question. He wrote a follow-up post over here. In his post he writes various way how one can find email addresses from list of domains. Well, this is not a puzzle but amazing Guest Post by Feodor Georgiev who has written on subject Job Interviewing the Right Way (and for the Right Reasons). An article which everyone should read. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, Readers Contribution, Readers Question, SQL, SQL Authority, SQL Puzzle, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Technology

  Read the article

• SQL SERVER – Read Only Files and SQL Server Management Studio (SSMS)

  - by pinaldave

  Just like any other Developer or DBA SQL Server Management Studio is my favorite application. Any any moment of the time I have multiple instances of the same application are open and I am working on it. Recently, I have come across a very interesting feature in SSMS related to “Read Only” files. I believe it is a little unknown feature as well so decided to write a blog about the same. First create a read only SQL file. You can make any file read by Right Click >> Properties >> Select Attribute Read Only. Now open the same file in SQL Server Management Studio. You will find that besides the file name there is a small ‘lock’ icon. This small icon indicates that the file is read only. Now let us attempt to edit the read only file. It will let us edit the file any way we want, however when we attempt to save it, it gives following pop-up value. The options in the pop-up are self explanatory and I liked it. The goal of the read only file is to prevent users to make un-intended changes. However, when a user should have complete control over the user file. User should be aware that the file is read only but if he wants to edit the file or save as a new file the choices should be present in front of it and the pop-up menu precisely captures the same. Now let us check option related to this feature in SSMS. Go to Menu >> Options >> Environment >> Documents You will find the third option which is “Allow editing of read-only files; warn when attempt to save”. In the above scenario it was already checked. Let us uncheck the same and do the same exercise which we have done earlier. I closed all the earlier window to avoid confusion. With the new option selected when I attempt to even modify the Read Only file, it gives me totally different pop up screen. It gives me an option like “Edit In-Memory”, “Make Writeable” etc. When you select “Edit In-Memory” it allows you to edit the file and later you can save as new file – just like the earlier scenario which we have discussed. . If clicked on the Make Writeable it will remove the restriction of the Read Only and file can be edited as pleased. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Camera frustum calculation coming out wrong

  - by Telanor

  I'm trying to calculate a view/projection/bounding frustum for the 6 directions of a point light and I'm having trouble with the views pointing along the Y axis. Our game uses a right-handed, Y-up system. For the other 4 directions I create the LookAt matrix using (0, 1, 0) as the up vector. Obviously that doesn't work when looking along the Y axis so for those I use an up vector of (-1, 0, 0) for -Y and (1, 0, 0) for +Y. The view matrix seems to come out correctly (and the projection matrix always stays the same), but the bounding frustum is definitely wrong. Can anyone see what I'm doing wrong? This is the code I'm using: camera.Projection = Matrix.PerspectiveFovRH((float)Math.PI / 2, ShadowMapSize / (float)ShadowMapSize, 1, 5); for(var i = 0; i < 6; i++) { var renderTargetView = shadowMap.GetRenderTargetView((TextureCubeFace)i); var up = DetermineLightUp((TextureCubeFace) i); var forward = DirectionToVector((TextureCubeFace) i); camera.View = Matrix.LookAtRH(this.Position, this.Position + forward, up); camera.BoundingFrustum = new BoundingFrustum(camera.View * camera.Projection); } private static Vector3 DirectionToVector(TextureCubeFace direction) { switch (direction) { case TextureCubeFace.NegativeX: return -Vector3.UnitX; case TextureCubeFace.NegativeY: return -Vector3.UnitY; case TextureCubeFace.NegativeZ: return -Vector3.UnitZ; case TextureCubeFace.PositiveX: return Vector3.UnitX; case TextureCubeFace.PositiveY: return Vector3.UnitY; case TextureCubeFace.PositiveZ: return Vector3.UnitZ; default: throw new ArgumentOutOfRangeException("direction"); } } private static Vector3 DetermineLightUp(TextureCubeFace direction) { switch (direction) { case TextureCubeFace.NegativeY: return -Vector3.UnitX; case TextureCubeFace.PositiveY: return Vector3.UnitX; default: return Vector3.UnitY; } } Edit: Here's what the values are coming out to for the PositiveX and PositiveY directions: Constants: Position = {X:0 Y:360 Z:0} camera.Projection = [M11:0.9999999 M12:0 M13:0 M14:0] [M21:0 M22:0.9999999 M23:0 M24:0] [M31:0 M32:0 M33:-1.25 M34:-1] [M41:0 M42:0 M43:-1.25 M44:0] PositiveX: up = {X:0 Y:1 Z:0} target = {X:1 Y:360 Z:0} camera.View = [M11:0 M12:0 M13:-1 M14:0] [M21:0 M22:1 M23:0 M24:0] [M31:1 M32:0 M33:0 M34:0] [M41:0 M42:-360 M43:0 M44:1] camera.BoundingFrustum: Matrix = [M11:0 M12:0 M13:1.25 M14:1] [M21:0 M22:0.9999999 M23:0 M24:0] [M31:0.9999999 M32:0 M33:0 M34:0] [M41:0 M42:-360 M43:-1.25 M44:0] Top = {A:0.7071068 B:-0.7071068 C:0 D:254.5584} Bottom = {A:0.7071068 B:0.7071068 C:0 D:-254.5584} Left = {A:0.7071068 B:0 C:0.7071068 D:0} Right = {A:0.7071068 B:0 C:-0.7071068 D:0} Near = {A:1 B:0 C:0 D:-1} Far = {A:-1 B:0 C:0 D:5} PositiveY: up = {X:0 Y:0 Z:-1} target = {X:0 Y:361 Z:0} camera.View = [M11:-1 M12:0 M13:0 M14:0] [M21:0 M22:0 M23:-1 M24:0] [M31:0 M32:-1 M33:0 M34:0] [M41:0 M42:0 M43:360 M44:1] camera.BoundingFrustum: Matrix = [M11:-0.9999999 M12:0 M13:0 M14:0] [M21:0 M22:0 M23:1.25 M24:1] [M31:0 M32:-0.9999999 M33:0 M34:0] [M41:0 M42:0 M43:-451.25 M44:-360] Top = {A:0 B:0.7071068 C:0.7071068 D:-254.5585} Bottom = {A:0 B:0.7071068 C:-0.7071068 D:-254.5585} Left = {A:-0.7071068 B:0.7071068 C:0 D:-254.5585} Right = {A:0.7071068 B:0.7071068 C:0 D:-254.5585} Near = {A:0 B:1 C:0 D:-361} Far = {A:0 B:-1 C:0 D:365} When I use the resulting BoundingFrustum to cull regions outside of it, this is the result: Pass PositiveX: Drew 3 regions Pass NegativeX: Drew 6 regions Pass PositiveY: Drew 400 regions Pass NegativeY: Drew 36 regions Pass PositiveZ: Drew 3 regions Pass NegativeZ: Drew 6 regions There are only 400 regions to draw and the light is in the center of them. As you can see, the PositiveY direction is drawing every single region. With the near/far planes of the perspective matrix set as small as they are, there's no way a single frustum could contain every single region.

  Read the article

< Previous Page | 461 462 463 464 465 466 467 468 469 470 471 472  | Next Page >