Search Results

Search found 41497 results on 1660 pages for 'fault'.

Page 467/1660 | < Previous Page | 463 464 465 466 467 468 469 470 471 472 473 474  | Next Page >

• Renamed Windows 2008 R2 domain ---WindowsXP client could not updated with new Domain name

  - by satishap

  I have renamed Windows Server 2008 R2 with all the steps using rendom,repadmin,gpupdate and successfully updated domain. My windows vista and above client got updated new domain when restarted. The help taken is from site http://www.youtube.com/watch?v=RwXyi1_UDWo But problem is with windows XP clients, they could not get new domain logon screen ans showing old domain name in logon screen.. Kindly anyone help me.........

  Read the article

• Can you have more than one ~/.ssh/config file?

  - by DrewVS

  We have a bastion server that we use to connect to multiple hosts, and our .ssh/config has grown to over a thousand lines (we have hundreds of hosts that we connect to). This is beginning to get a little unwieldy and I'd like to know if there is a way to break the .ssh/config file up into multiple files. Ideally, we'd specify somewhere that other files would be treated as an .ssh/config file, possibly like: ~/.ssh/config ~/.ssh/config_1 ~/.ssh/config_2 ~/.ssh/config_3 ... I have read the documentation on ssh/config, and I don't see that this is possible. But maybe someone else has had a similar issue and has found a solution.

  Read the article

• I have a Windows Server 2008 R2 box with IIS 7.5

  - by bao

  In Event viewer i have found this: The World Wide Web Publishing Service service entered the stopped state. - - 7036 0 4 0 0 0x8080000000000000 6913 System w2k8x64 - World Wide Web Publishing Service stopped 570033005300560043002F0031000000 How to determine, was server stopped by clicking "Stop" in IIS manager or it stopped itself because of some other reasons? When the stop event occured I was logged in via RDP but I don't remember and clicks in IIS Manager...:( there are no error messages in event viewer

  Read the article

• SSH_ORIGINAL_ENVIRONMENT error with snow leopard client to a gitosis server on debian

  - by Mica

  I have a server running gitosis (installed from the package manager) on debian lenny. I am able to perform all operations from my linux mint laptop, but from my Mac running an up-to-date Snow Leopard gives me the following error: mica@waste Desktop$ git clone [email protected]:Poems.git Initialized empty Git repository in /Users/micas/Desktop/Poems/.git/ ERROR:gitosis.serve.main:Repository read access denied fatal: The remote end hung up unexpectedly mica@waste Desktop$ ssh -v [email protected] OpenSSH_5.2p1, OpenSSL 0.9.8l 5 Nov 2009 debug1: Reading configuration data /etc/ssh_config debug1: Applying options for * debug1: Connecting to 192.168.0.156 [192.168.0.156] port 22. debug1: Connection established. debug1: identity file /Users/micas/.ssh/identity type -1 debug1: identity file /Users/micas/.ssh/id_rsa type 1 debug1: identity file /Users/micas/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.1p1 Debian-5 debug1: match: OpenSSH_5.1p1 Debian-5 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.2 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host '192.168.0.156' is known and matches the RSA host key. debug1: Found key in /Users/mica/.ssh/known_hosts:5 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password debug1: Next authentication method: publickey debug1: Offering public key: /Users/mica/.ssh/id_rsa debug1: Remote: Forced command: gitosis-serve mica@waste debug1: Remote: Port forwarding disabled. debug1: Remote: X11 forwarding disabled. debug1: Remote: Agent forwarding disabled. debug1: Remote: Pty allocation disabled. debug1: Server accepts key: pkalg ssh-rsa blen 277 debug1: Remote: Forced command: gitosis-serve micas@waste debug1: Remote: Port forwarding disabled. debug1: Remote: X11 forwarding disabled. debug1: Remote: Agent forwarding disabled. debug1: Remote: Pty allocation disabled. debug1: Authentication succeeded (publickey). debug1: channel 0: new [client-session] debug1: Requesting [email protected] debug1: Entering interactive session. debug1: Requesting authentication agent forwarding. PTY allocation request failed on channel 0 ERROR:gitosis.serve.main:Need SSH_ORIGINAL_COMMAND in environment. debug1: client_input_channel_req: channel 0 rtype exit-status reply 0 debug1: client_input_channel_req: channel 0 rtype [email protected] reply 0 debug1: channel 0: free: client-session, nchannels 1 Connection to 192.168.0.156 closed. Transferred: sent 2544, received 2888 bytes, in 0.1 seconds Bytes per second: sent 29642.1, received 33650.3 debug1: Exit status 1 Extensive googling of the error isn't returning much-- I changed the /etc/sshd_config file on my Mac as per http://www.schmidp.com/2009/06/23/enable-ssh-agent-key-forwarding-on-snow-leopard/. I still get the same error.

  Read the article

• fast way to find network user computer on domain hogging all wan bandwidth

  - by dasko

  i have a network of about 40 domain users and i have huge latency wan issues, like 1400ms for google.com pings. I have noticed that the problem goes away after everyone goes home for the day. I would like to know if i should use something like a hub with wireshark on the router or modem to see if there are any irregular activity. I am open to suggestions but i need to isolate which user has the bug. I am assuming it is either downloads or someone spamming out heavily and not knowing. It would be best to trace to ip number so i can just look into dns and find the pc hostname with the problem? This is the first client i have this problem with so never really needed to address it before but not suprised as users don't actually listen to any best practices that we have suggested. Please help, thanks. just to update, pc's to routers and other computers have ping latency of 1ms so it is right after i hit the wan, using tracert to a web site (random), that i get the massive delay in the responses. As well this is a dsl line with 5mb down and 650kb up (maybe upload saturation?) thanks.

  Read the article

• Using Lighttpd: apache proxy or direct connection?

  - by Halfgaar

  Hi, I'm optimizing a site by using lighttpd for the static media. I've found that a recommended solution is to use Apache Proxy to point to the lighttpd server. But, does that use up an Apache thread/process per request? In my setup, I've noticed that all my processes are used up, even though they aren't doing anything, CPU wise. To free up apache processes, I've configured lighttpd and the amount of processes needed is lowered significantly, Munin shows. However, I've set it up to connect directly to lighty, to prevent apache workers from being occupied by serving static media. My question is: when using Apache Proxy, does that also use up a process/worker per request?

  Read the article

• When running PowerShell script as a scheduled task some Exchange 2010 database properties are null

  - by barophobia

  Hello, I've written a script that intends to retrieve the DatabaseSize of a database from Exchange 2010. I created a new AD user for this script to run under as a scheduled task. I gave this user admin rights to the Exchange Organization (as a last resort during my testing) and local admin rights on the Exchange machine. When I run this script manually by starting powershell (with runas /noprofile /user:domain\user powershell) everything works fine. All the database properties are available. When I run the script as a scheduled task a lot of the properties are null including the one I want: DatabaseSize. I've also tried running the script as the domain admin account with the same results. There must be something different in the two contexts but I can't figure out what it is. My script: Add-PSSnapin Microsoft.Exchange.Management.PowerShell.E2010 Write-EventLog 'Windows PowerShell' -source PowerShell -eventid 100 -message "Starting script" $databases = get-mailboxdatabase -status if($databases -ne $null) { Write-EventLog 'Windows PowerShell' -source PowerShell -eventid 100 -message "Object created" $databasesize_text = $databases.databasesize.tomb().tostring() if($databasesize_text -ne $null) { $output = "echo "+$databasesize_text+":ok" Write-EventLog 'Windows PowerShell' -source PowerShell -eventid 100 -message "Path check" if(test-path "\\mon-01\prtgsensors\EXE\") { Write-EventLog 'Windows PowerShell' -source PowerShell -eventid 100 -message "Path valid" Set-Content \\mon-01\prtgsensors\EXE\ex-05_db_size.bat -value $output } Write-EventLog 'Windows PowerShell' -source PowerShell -eventid 100 -message "Exiting program" } else { Write-EventLog 'Windows PowerShell' -source PowerShell -eventid 100 -message "databasesize_text is empty. nothing to do" } } else { Write-EventLog 'Windows PowerShell' -source PowerShell -eventid 100 -message "object not created. nothing to do" } exit 0

  Read the article

• IIS7 - Virtual Directories' Parent Paths behaving differently than previous versions

  - by MisterZimbu

  I'm doing a migration of a web server running on IIS 5 to IIS 7. I'm noticing that the virtual directories are behaving differently between the two. I have a site located at c:\inetpub\SiteName. This site contains a virtual directory "bob" that points at c:\virtualdirs\bob. There's a script in the bob folder (script.asp) that contains just: <!--#include virtual="../index.asp"--> I'm noticing different behaviors between IIS5 and IIS7 when I attempt to run the script by going to http://SiteName/bob/script.asp: IIS5 references the parent path of the site, and imports c:\inetpub\SiteName\index.asp. IIS7 references the parent folder of the virtual directory, and looks for a c:\virtualdirs\index.asp (that doesn't exist). Doing a Response.Write of a Server.MapPath confirms this. Is there a way to get IIS7 to behave like IIS5 in this regard? Unfortunately, moving index.asp and its logic into the virtualdirs folder isn't an option as the virtual directory will be shared across many sites (with differing index.asps). Thanks.

  Read the article

• sql server 2008 snapshot agent problem

  - by Dmitri

  Hi! I've just installed mssql 2008 sp1 x64 on windows 7 RTM, and have the problem with creating snapshots, whenever I try to launch the snapshot agent (i.e. to setup transactional replication publication), it throws the error that 'the file is missing'. I have looked into c:\program files\microsoft sql server\100\com and there are no executable files at all, like snapshot.exe! I tried a crazy move to copy all the files from my mssql 2005 com folder, without replacing ofcourse, and now it doesn't give an error, but says 'starting' all the time, but nothing happens. (Now I have removed those files again) I have all of the relevant features installed. So please help me figure out what to do now! Thanks! Dmitri.

  Read the article

• Current wisdom on SQL Server and Hyperthreading?

  - by BradC

  Lots of articles out there (see Slava Oks's original SQL 2000 article and Kevin Kline's SQL 2005 update) recommend disabling hyperthreading on SQL servers, or at least testing your specific workload before enabling it on your servers. This issue is gradually becoming less relevant as true multi-core processors replace hyperthreaded ones, but what's the current wisdom on this issue? Does this advice change any with SQL 2005 64-bit, or SQL 2008, or Windows Server 2008? Ideally, this should be tested in advance in a staging environment, but what about for servers that have already made it into production with HT enabled? How can I tell if performance issues we're experiencing might be related to HT? Is there some specific combination of perfmon counters that might point me in that direction, as opposed to all the other things I normally pursue when working on improving SQL performance? Edit: This is especially attractive because of the potential for an across the board improvement for some of my high-cpu servers, but the client is going to want to see something concrete that helps me identify which servers really could benefit from disabling hyperthreading. Of course, conventional performance troubleshooting is ongoing, but sometimes any little bit helps.

  Read the article

• Xen DomU on DRBD device: barrier errors

  - by Halfgaar

  I'm testing setting up a Xen DomU with a DRBD storage for easy failover. Most of the time, immediatly after booting the DomU, I get an IO error: [ 3.153370] EXT3-fs (xvda2): using internal journal [ 3.277115] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.336014] nf_conntrack version 0.5.0 (3899 buckets, 15596 max) [ 3.515604] init: failsafe main process (397) killed by TERM signal [ 3.801589] blkfront: barrier: write xvda2 op failed [ 3.801597] blkfront: xvda2: barrier or flush: disabled [ 3.801611] end_request: I/O error, dev xvda2, sector 52171168 [ 3.801630] end_request: I/O error, dev xvda2, sector 52171168 [ 3.801642] Buffer I/O error on device xvda2, logical block 6521396 [ 3.801652] lost page write due to I/O error on xvda2 [ 3.801755] Aborting journal on device xvda2. [ 3.804415] EXT3-fs (xvda2): error: ext3_journal_start_sb: Detected aborted journal [ 3.804434] EXT3-fs (xvda2): error: remounting filesystem read-only [ 3.814754] journal commit I/O error [ 6.973831] init: udev-fallback-graphics main process (538) terminated with status 1 [ 6.992267] init: plymouth-splash main process (546) terminated with status 1 The manpage of drbdsetup says that LVM (which I use) doesn't support barriers (better known as tagged command queuing or native command queing), so I configured the drbd device not to use barriers. This can be seen in /proc/drbd (by "wo:f, meaning flush, the next method drbd chooses after barrier): 3: cs:Connected ro:Primary/Secondary ds:UpToDate/UpToDate C r---- ns:2160152 nr:520204 dw:2680344 dr:2678107 al:3549 bm:9183 lo:0 pe:0 ua:0 ap:0 ep:1 wo:f oos:0 And on the other host: 3: cs:Connected ro:Secondary/Primary ds:UpToDate/UpToDate C r---- ns:0 nr:2160152 dw:2160152 dr:0 al:0 bm:8052 lo:0 pe:0 ua:0 ap:0 ep:1 wo:f oos:0 I also enabled the option disable_sendpage, as per the drbd docs: cat /sys/module/drbd/parameters/disable_sendpage Y I also tried adding barriers=0 to fstab as mount option. Still it sometimes says: [ 58.603896] blkfront: barrier: write xvda2 op failed [ 58.603903] blkfront: xvda2: barrier or flush: disabled I don't even know if ext3 has a nobarrier option. And, because only one of my storage systems is battery backed, it would not be smart anyway. Why does it still compain about barriers when I disabled that? Both host are: Debian: 6.0.4 uname -a: Linux 2.6.32-5-xen-amd64 drbd: 8.3.7 Xen: 4.0.1 Guest: Ubuntu 12.04 LTS uname -a: Linux 3.2.0-24-generic pvops drbd resource: resource drbdvm { meta-disk internal; device /dev/drbd3; startup { # The timeout value when the last known state of the other side was available. 0 means infinite. wfc-timeout 0; # Timeout value when the last known state was disconnected. 0 means infinite. degr-wfc-timeout 180; } syncer { # This is recommended only for low-bandwidth lines, to only send those # blocks which really have changed. #csums-alg md5; # Set to about half your net speed rate 60M; # It seems that this option moved to the 'net' section in drbd 8.4. (later release than Debian has currently) verify-alg md5; } net { # The manpage says this is recommended only in pre-production (because of its performance), to determine # if your LAN card has a TCP checksum offloading bug. #data-integrity-alg md5; } disk { # Detach causes the device to work over-the-network-only after the # underlying disk fails. Detach is not default for historical reasons, but is # recommended by the docs. # However, the Debian defaults in drbd.conf suggest the machine will reboot in that event... on-io-error detach; # LVM doesn't support barriers, so disabling it. It will revert to flush. Check wo: in /proc/drbd. If you don't disable it, you get IO errors. no-disk-barrier; } on host1 { # universe is a VG disk /dev/universe/drbdvm-disk; address 10.0.0.1:7792; } on host2 { # universe is a VG disk /dev/universe/drbdvm-disk; address 10.0.0.2:7792; } } DomU cfg: bootloader = '/usr/lib/xen-default/bin/pygrub' vcpus = '2' memory = '512' # # Disk device(s). # root = '/dev/xvda2 ro' disk = [ 'phy:/dev/drbd3,xvda2,w', 'phy:/dev/universe/drbdvm-swap,xvda1,w', ] # # Hostname # name = 'drbdvm' # # Networking # # fake IP for posting vif = [ 'ip=1.2.3.4,mac=00:16:3E:22:A8:A7' ] # # Behaviour # on_poweroff = 'destroy' on_reboot = 'restart' on_crash = 'restart' In my test setup: the primary host's storage is 9650SE SATA-II RAID PCIe with battery. The secondary is software RAID1. Isn't DRBD+Xen widely used? With these problems, it's not going to work.

  Read the article

• Could not retrieve backup settings for primary ID in Log shipping

  - by user1723139

  I am doing log shipping between two Amazon EC2 instances running Windows Server 2008 R2 with SQL Server 2008 R2 standard edition. Both the instances are in the same domain and I can access the shared folders between the instances. The SQL server service account, agent service account are all running under a domain account. When I activate log shipping (with stand by mode restore in secondary server), the initial backup gets restored on the secondary. After that the backup operation is getting failed and i get the following error message: *** Error: Could not retrieve backup settings for primary ID 'xxxxxx-xxxx-xxxx-xxxx-4d772cd7337e'.(Microsoft.SqlServer.Management.LogShipping) *** *** Error: Failed to connect to server IP-0A7653F2.(Microsoft.SqlServer.ConnectionInfo) *** ****** Error: A network-related or instance-specific error occurred while establishing a connection to SQL Server.******** **The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(.Net SqlClient Data Provider) *** **----- END OF TRANSACTION LOG BACKUP -----**** Any ideas?

  Read the article

• Route all traffic via OpenVPN client

  - by Ilya

  I've got OpenVPN client running on 192.168.0.3. What I'd like to do is route all the traffic from the second computer with 192.168.0.100 via OpenVPN client that's running on the first computer. My router ip is 192.168.0.1 Network topology: Computer with OpenVPN client: 192.168.0.3 Computer that has to be rerouted: 192.168.0.100 Router: 192.168.0.1 I want it to work in the following way: 192.168.0.100 computer => 192.168.0.3 computer => OpenVPN => 192.168.0.1 How can I achieve that by only modifying windows' routing table? I've tried the following, which didn't work (it just dropped my internet connection): route delete 0.0.0.0 mask 255.255.255.255 192.168.0.1 route add 0.0.0.0 mask 255.255.255.255 192.168.0.100 Thanks!

  Read the article

• Windows typeperf and pound signs.

  - by Weegee

  I'm currently trying to use typeperf to access some Windows performance counters. Unfortunately, a few of the instances I'm trying to check are of the format service#1. The command typeperf "\\server\Process(service#1)\Working Set Peak" is unfortunately returning the data for \\server\Process(service)\Working Set Peak rather than the data for the instance service#1. This holds true for any of the services that have pound signs in the counter string. Does anyone know of a method to get around this problem? Sample output: I:\>typeperf -s server "\Process(service#1)\Working Set" "(PDH-CSV 4.0)","\\server\Process(service)\Working Set" "10/08/2009 09:37:29.070","1643274240.000000" "10/08/2009 09:37:30.070","1643274240.000000" "10/08/2009 09:37:31.070","1643274240.000000" The command completed successfully. I:\>typeperf -s server "\Process(service#2)\Working Set" "(PDH-CSV 4.0)","\\server\Process(service)\Working Set" "10/08/2009 09:37:39.273","1643274240.000000" "10/08/2009 09:37:40.273","1643274240.000000" "10/08/2009 09:37:41.273","1643274240.000000" "10/08/2009 09:37:42.273","1643274240.000000" "10/08/2009 09:37:43.273","1643274240.000000" The command completed successfully. I can confirm in PerfMon that the Working Set value "1643274240.000000" is incorrect for both service#1 and service#2. I am running Windows XP Service Pack 2, but a co-worker who is running Windows Server 2003 was having the same troubles.

  Read the article

• Installing Alfresco on Ubuntu 9.10

  - by C.W.Holeman II

  Are there differences for installing Alfresco on Ubuntu 9.10 compared to Installing Alfresco on Ubuntu 8.04 ?

  Read the article

• RHEL server Yum dependencies not working

  - by Tony

  I have a redhat server that isnt resolving dependencies correctly. I want to install httpd via yum "yum install httpd" and it installs correctly, but when i go to start httpd I get the following error: /sbin/service httpd restart Stopping httpd: [FAILED] Starting httpd: /usr/sbin/httpd: error while loading shared libraries: libaprutil-1.so.0: cannot open shared object file: No such file or directory [FAILED] It is missing the dependency for apr-util package. Weirdly the i386 package is installed and not the x86_64 package. Can anyone shed any light on why the dependencies might not be resolved correctly? ldd /usr/sbin/httpd libm.so.6 => /lib64/libm.so.6 (0x00002b02370db000) libpcre.so.0 => /lib64/libpcre.so.0 (0x00002b023735e000) libselinux.so.1 => /lib64/libselinux.so.1 (0x00002b023757a000) libaprutil-1.so.0 => not found libcrypt.so.1 => /lib64/libcrypt.so.1 (0x00002b0237793000) libldap-2.3.so.0 => /usr/lib64/libldap-2.3.so.0 (0x00002b02379cb000) liblber-2.3.so.0 => /usr/lib64/liblber-2.3.so.0 (0x00002b0237c06000) libdb-4.3.so => /lib64/libdb-4.3.so (0x00002b0237e14000) libexpat.so.0 => /lib64/libexpat.so.0 (0x00002b0238109000) libapr-1.so.0 => not found libpthread.so.0 => /lib64/libpthread.so.0 (0x00002b023832c000) libdl.so.2 => /lib64/libdl.so.2 (0x00002b0238547000) libc.so.6 => /lib64/libc.so.6 (0x00002b023874c000) libsepol.so.1 => /lib64/libsepol.so.1 (0x00002b0238aa3000) /lib64/ld-linux-x86-64.so.2 (0x00002b0236ebe000) libresolv.so.2 => /lib64/libresolv.so.2 (0x00002b0238ce9000) libsasl2.so.2 => /usr/lib64/libsasl2.so.2 (0x00002b0238eff000) libssl.so.6 => /lib64/libssl.so.6 (0x00002b0239118000) libcrypto.so.6 => /lib64/libcrypto.so.6 (0x00002b0239364000) libgssapi_krb5.so.2 => /usr/lib64/libgssapi_krb5.so.2 (0x00002b02396b6000) libkrb5.so.3 => /usr/lib64/libkrb5.so.3 (0x00002b02398e4000) libcom_err.so.2 => /lib64/libcom_err.so.2 (0x00002b0239b79000) libk5crypto.so.3 => /usr/lib64/libk5crypto.so.3 (0x00002b0239d7c000) libz.so.1 => /usr/lib64/libz.so.1 (0x00002b0239fa1000) libkrb5support.so.0 => /usr/lib64/libkrb5support.so.0 (0x00002b023a1b5000) libkeyutils.so.1 => /lib64/libkeyutils.so.1 (0x00002b023a3be000) yet this is the i386 package apr-util-1.2.7-11.el5.i386 : Apache Portable Runtime Utility library Repo : installed Matched from: Filename : /usr/lib/libaprutil-1.so.0

  Read the article

• Re-deploy Reports on SCOM Management Packs

  - by Gabriel Guimarães

  I've migrated Reporting Services on a SCOM 2007 R2 install, and noticed that the reports have not being copied. I can create a new report, but the ones I've had because of the management packs are gone. I've tried re-applying the Management Packs however it doesn't re-deploy them and when I try to access for example: Monitoring - Microsoft Windows Print Server - Microsoft Windows Server 2000 and 2003 Print Services - State View - select any item and click Alerts on the right menu. I get the following error: Date: 12/24/2010 12:40:35 PM Application: System Center Operations Manager 2007 R2 Application Version: 6.1.7221.0 Severity: Error Message: Cannot initialize report. Microsoft.Reporting.WinForms.ReportServerException: The item '/Microsoft.SystemCenter.DataWarehouse.Report.Library/Microsoft.SystemCenter.DataWarehouse.Report.Alert' cannot be found. (rsItemNotFound) at Microsoft.Reporting.WinForms.ServerReport.GetExecutionInfo() at Microsoft.Reporting.WinForms.ServerReport.GetParameters() at Microsoft.EnterpriseManagement.Mom.Internal.UI.Reporting.Parameters.ReportParameterBlock.Initialize(ServerReport serverReport) at Microsoft.EnterpriseManagement.Mom.Internal.UI.Console.ReportForm.SetReportJob(Object sender, ConsoleJobEventArgs args) The report doesn't exist on the reporting services side. how do I re-deploy this reports? Thanks in advance.

  Read the article

• shutdown -i all computers in active directory domain

  - by Sihan Zheng

  I'm not sure if this is possible, but this is my goal: At the end of the day, I want to be able to turn off all the computers in the domain from a client. My account has sufficient privileges to shutdown any single computer remotely using shutdown -I, and I can RDP into any computer in the domain. However, is there an automated technique that does this? the computers in the domain are predictably named (computer1, computer2, etc), but than manipulating a list of 2000 computers in shutdown -I is pretty clumsy. Is there a way to shutdown every single computer in the domain from a single client? The domain server is windows 2003, and the clients all run windows xp thanks

  Read the article

• Public-to-Public IPSec tunnel: NAT confusion

  - by WuckaChucka

  I know this is possible -- and apparently fairly common with larger companies that don't/can't route private addresses for overlap reasons -- but I can't wrap my head around how to get this to work. I'm playing around with pfSense, Vyatta and a Cisco 5505 right now, hardware-wise. So here's my setup: WEST: Vyatta outside: 10.0.0.254/24 inside: 172.16.0.1/24 machine a: 172.16.0.200/24 EAST: Cisco 5505 outside: 10.0.0.210/24 inside: 192.168.10.1 machine b (webserver): 192.168.10.2 So what we're trying to do is this: route traffic across the tunnel from machine A to machine B without using private addresses. i.e. 172.16.0.200 makes a TCP request to 10.0.0.210:80, and as far as EAST is concerned, it sees a src IP of 10.0.0.254. On WEST, I have your typical many-to-one Source NAT to translate 172.16.0.0/24 to 10.0.0.254 and that's confirmed to be working. Also on WEST, I have the following IPSec config: Local IP: 10.0.0.254 Peer IP: 10.0.0.210 local subnet: 10.0.0.254/32 remote subnet: 10.0.0.210/32 I have the reversed configuration on EAST. What happens when I make a request from machine A to 10.0.0.210:80 is that the SNAT translates the private address of machine A to 10.0.0.254 and it's routed out (and discarded at the other end) without establishing the tunnel. What I'm assuming is happening is that the inside interface on WEST receives a packet from 172.16.0.200 and since this doesn't match the local subnet defined in the tunnel configuration, it's not processed by the IPSec engine and the tunnel is not established. How do you make this work? Seems like a chicken and egg thing with the NAT and IPSec and I just can't wrap my head around how this can be done: can I say, "if a packet is received on the inside interface with a destination of 10.0.0.210, translate it to 10.0.0.254 before the IPSec engine inspects it"?

  Read the article

• Backing up an online database

  - by Veejay

  I havea 70MB db of my website which is hosted with a provider. I am able to access my db using SSMS 2008 remotely. On a running website, which is the best way I can back up the db locally on machine Thanks

  Read the article

• google.com different IP in different countries. How?

  - by HeavyWave

  If you ping google.com from different countries you will get replies from local google servers. How does that work? Can a DNS record have multiple A addresses? Could someone point me to the technology they use to do that? Update. OK, so Google's DNS server gives out a different IP based on the location. But, as Alexandre Jasmin pointed out, how do they track the location? Surely their DNS won't ever see your IP address. Is the server querying Google's DNS guaranteed to be from the location it represents?

  Read the article

• Reason for perpetual dynamic DNS updates?

  - by mad_vs

  I'm using dynamic DNS (the "adult" version from RFC 2136, not à la DynDNS), and for a while now I've been seeing my laptops with MacOS 10.6.x churning out updates about every 10 seconds. And seemingly redundant updates at that, as the IP is more or less stable (consumer broadband). I don't remember seeing that frequency in the (distant...) past. The lowest time-to-live that MacOS pushes on the entries is 2 minutes, so I have no clue what's going on. ... Jan 12 13:17:18 lambda named[18683]: info: client 84.208.X.X#48715: updating zone 'dynamic.foldr.org/IN': deleting rrset at 'rCosinus._afpovertcp._tcp.dynamic.foldr.org' SRV Jan 12 13:17:18 lambda named[18683]: info: client 84.208.X.X#48715: updating zone 'dynamic.foldr.org/IN': adding an RR at 'rCosinus._afpovertcp._tcp.dynamic.foldr.org' SRV Jan 12 13:17:26 lambda named[18683]: info: client 84.208.X.X#48715: updating zone 'dynamic.foldr.org/IN': deleting rrset at 'rcosinus.dynamic.foldr.org' AAAA ... Additionally, I can't find out what triggers the updates on the laptop-side. Is this a known problem, and how would I go about debugging it? One of the machines is freshly purchased and installed. The only "major" change was installation of the Miredo client for IPv6/Teredo, but even disabling it didn't make a change (except that AAAA records are no longer published).

  Read the article

• HTTPS is not working in transparent proxy with Squid

  - by Supratik

  Hi I am using Squid proxy 3.1, all systems in the LAN connects to the internet through proxy. Direct connection is blocked using the iptables from the gateway server. There are some devices which does not have options for auto proxy or manual proxy and can only connect to the internet directly. So I enabled transparent proxy in Squid and redirected packets for port 80 and 443 to Squid proxy using iptables. Now the problem is it is working fine for HTTP port but HTTPS is not working. It is throwing "ssl_error_rx_record_too_long" error. If it is not possible through transparent proxy can you please suggest me another solution. Warm Regards Supratik

  Read the article

• Authentication problem: can't bypass the login prompt when browsing to the SQL Reporing Services website

  - by laurens

  I'm having a hard time configuring Reporting services on one of our servers. I'm not uninitiated in the domain of IIS7 but I cannot get rid of the login prompt when I'm surfing to the Reporting services website. What I did: I made a windows and SQL user with the same name: Then I choose Anonymous authentication in II7 and filled in the credentials of the specific R.S. user http://img32.imageshack.us/i/iis7auth.jpg/ I choose 'Local Service' as the service account in the R.S. configuration mgr http://img88.imageshack.us/i/rsconfigmgr.jpg/ The first problem is that there's always a pop-up when surfing to the website The second is that when I'm able to log in I get the message that the user doesn't have the appropriate permissions. The pop-up: http://img693.imageshack.us/i/loginpopup.jpg/ The server is a 2008 Web Server with SQL 2008 R2 Express. What am I doing wrong? Thanks in advance!

  Read the article

• VPN Trunk Between Cisco ASA 5520 and DrayTek Vigor 2930

  - by David Heggie

  I'm a bit of a VPN newbie, so please go easy on me ... I'm trying to use the VPN trunking capabilities of the DrayTek Vigor 2930 firewall to bond two IPSec VPN connections to a Cisco ASA 5520 device and I'm getting myself tied in knots and hope someone here with more knowledge / experience can help. I have a remote site with two ADSL connections and the DrayTek box. The main office site has the Cisco ASA device. I am able to setup a single IPSec connection between the two sites on either of the ADSL connections' public IP addresses, but as soon as I try to use the VPN bonding, nothing works. The VPN tunnels are both still up, but the traffic is getting lost somewhere. I suspect it's due to the ASA not knowing how to route the traffic back over the VPN - one minute, traffic from my remote office's network is coming from public ip address #1, the next it's coming from public address #2 and it doesn't know what to do. Well, that's my newbie impression of what's going wrong, but I don't really know: If this is really what's happening If what I'm trying to do (bond two VPN connections from a single remote network to improve the bandwidth / resiliency) is possible with the kit I've got Could anyone help?

  Read the article

< Previous Page | 463 464 465 466 467 468 469 470 471 472 473 474  | Next Page >