Search Results

Search found 15646 results on 626 pages for 'port 80'.

Page 467/626 | < Previous Page | 463 464 465 466 467 468 469 470 471 472 473 474  | Next Page >

• Freebsd or Linux? as BGP router over 100mbps

  - by Yucong Sun

  I am building a server to act as a BGP border router for my 100mbps uplink in ISP. I needs these feature: 1) Dual stack BGP peering/routing (at least 100Mbps, maybe more). 2) Potential full internet BGP feed. 3) Some basic ACL functionality. The hardware is L3426/8G ram. NIC will be on-board dual port Broadcom 5716. I've worked with Linux extensively before and it seems to be able to handle 100mbps, but I heard FreeBSD is faster on networking stuff. Which one should I use? And do we have some performance benchmark numbers out there? Cheers.

  Read the article

• How can I monitor network traffic in an all Mac home network?

  - by raiglstorfer

  I have an all Mac network consisting of an Airport Extreme, 1 MacPro, 1 Mac Mini, 2 MackBook Pros, 2 iPads, and 2 iPhones. The Mac Pro is connected directly to the Airport Extreme via Cat5 and the rest is all running via Wireless. Lately I've been getting prompted by Google to enter Capchas frequently. The message states that I might have software running on my network I'm not aware of. My wireless router is password protected using WPA2 Personal and I frequently change my password so I don't think someone is using the network from outside (but I've no way to confirm this). I'm looking for a relatively cheap (preferably open source) solution that would enable me to monitor and profile the network usage by machine and port. Can someone recommend a solution?

  Read the article

• Varnish does not recognize req.hash

  - by Yogesh

  I have Varnish 3.0.2 on Redhat and service varnish start fails after I added vcl_hash section. I did varnishd and then loaded the vcl using vcl.load vcl.load default default.vcl Message from VCC-compiler: Unknown variable 'req.hash' At: ('input' Line 24 Pos 9) set req.hash += req.url; --------########------------ Running VCC-compiler failed, exit 1 cat default.vcl backend default { .host = "127.0.0.1"; .port = "8080"; } sub vcl_recv { if( req.url ~ "\.(css|js|jpg|jpeg|png|swf|ico|gif|jsp)$" ) { unset req.http.cookie; } } sub vcl_hash { set req.hash += req.url; set req.hash += req.http.host; if( req.httpCookie == "JSESSIONID" ) { set req.http.X-Varnish-Hashed-On = regsub( req.http.Cookie, "^.*?JSESSIONID=([a-zA-z0-9]{32}\.[a-zA-Z0-9]+)([\s$\n])*.*?$", "\1" ); set req.hash += req.http.X-Varnish-Hashed-On; } return(hash); } What could be wrong?

  Read the article

• Problem with VPN using 2 Wire Router with a Linksys Router.

  - by Hiram Hubbard

  I am having a problem with a VPN between a 2 Wire router and a Linksys router. 2 wire is the client PC using Linksys Quick VPN software and Linksys RVS4000 is the server. The PC is not the issue. It works on a different network not using 2 wire. Also the Linksys RVS4000 is not the issue, 3 other user can VPN to it with no problem not using 2 Wire. The problem is with 2 Wire. The client PC is getting this error: "The remote gateway is not responding" What configuration changes are needed on the 2 Wire router (port, UPNP, etc...) and what changes are needed if any on the Linksys RVS4000? Thanks.

  Read the article

• Security question pertaining web application deployment

  - by orokusaki

  I am about to deploy a web application (in a couple months) with the following set-up (perhaps anyways): Ubuntu Lucid Lynx with: IP Tables firewall (white-list style with only 3 ports open) Custom SSH port (like 31847 or something) No "root" SSH access Long, random username (not just "admin" or something) with a long password (65 chars) PostgreSQL which only listens to localhost 256 bit SSL Cert Reverse proxy from NGINX to my application server (UWSGI) Assume that my colo is secure (Physical access isn't my concern for the time being) Application-level security (SQL injection, XSS, Directory Traversal, CSRF, etc) Perhaps IP masquerading (but I don't really understand this yet) Does this sound like a secure setup? I hear about people's web apps getting hacked all the time, and part of me thinks, "maybe they're just neglecting something", but the other part of me thinks, "maybe there's nothing you can do to protect your server, and those things are just measures to make it a little harder for script kiddies to get in". If I told you all of this, gave you my IP address, and told you what ports were available, would it be possible for you to get in (assuming you have a penetration testing tool), or is this really protected well.

  Read the article

• AIX network parameters to close TCP sockets of unplugged devices

  - by ADD Geek

  Hi there We have an AIX box, running what we call in banking "ATM Switch" not the ATM networking switch, but the bank ATM driver. where we have some ATM machines connected to two server processes. The problem is, when we disconnect any of these machines, the netstat -na| grep <port number> command shows that the socket established for this disconnected device is still established, we have to manually send a command from the software to make the socket aware that it is not live anymore. Is there a parameter on tcp level to make this connection aware within a minute or two that this device is not connected anymore? we had the following parameters set with root privileges: no -o tcp_keepidle=1000 no -o tcp_keepcnt=2 no -o tcp_keepintvl=150 no -o tcp_finwait2=100 it was originally having the default values. but even after we changed these parameters and restarted the server processes, the problem was still there.

  Read the article

• Apache 2.2.16 + PHP 5.2.14 sometimes causes Apache to not stop properly

  - by ZiggyTheHamster

  Sometimes, Apache decides not to shut down nicely. killall apache2 or kill -9 (apache2 PID here) shuts it down so that it can actually start back up without the port being in use. Other posts seem to indicate that PHP 5.2 might have issues hanging up Apache. I'm using the worker MPM on an x86_64 Gentoo Linux system if that helps. Any other things I should consider hanging up Apache besides PHP? Should I be stopping Apache with /etc/init.d/apache2 gracefulstop instead of /etc/init.d/apache2 stop?

  Read the article

• IIS7 FTP Setup - An error occured during the authentication process. 530 End Login failed

  - by robmzd

  I'm having a problem very similar to IIS 7.5 FTP IIS Manager Users Login Fail (530) on Windows Server 2008 R2 Standard. I have created an FTP site and IIS Manager user but am having trouble logging in. I could really do with getting this working with the IIS Manager user rather than by creating a new system user since I'm fairly restricted with those accounts. Here is the output when connecting locally through command prompt: C:\Windows\system32>ftp localhost Connected to MYSERVER. 220 Microsoft FTP Service User (MYSERVER:(none)): MyFtpLogin 331 Password required for MyFtpLogin. Password: *** 530-User cannot log in. Win32 error: Logon failure: unknown user name or bad password. Error details: An error occured during the authentication process. 530 End Login failed. I have followed the guide to configure ftp with iis manager authentication in iis 7 and Adding FTP Publishing to a Web Site in IIS 7 Things I have done and checked: The FTP Service is installed (along with FTP Extensibility). Local Service and Network Service have been given access to the site folder Permission has been given to the config files Granted read/write permissions to the FTP Root folder The Management Service is installed and running Enable remote connections is ticked with 'Windows credentials or IIS manager credentials' selected The IIS Manager User has been added to the server (root connection in the IIS connections branch) The new FTP site has been added IIS Manager Authentication has been added to the FTP authentication providers The IIS Manager user has been added to the IIS Manager Permissions list for the site Added Read/Write permissions for the user in the FTP Authorization Rules Here's a section of the applicationHost config file associated with the FTP site <site name="MySite" id="8"> <application path="/" applicationPool="MyAppPool"> <virtualDirectory path="/" physicalPath="D:\Websites\MySite" /> </application> <bindings> <binding protocol="http" bindingInformation="*:80:www.mydomain.co.uk" /> <binding protocol="ftp" bindingInformation="*:21:www.mydomain.co.uk" /> </bindings> <ftpServer> <security> <ssl controlChannelPolicy="SslAllow" dataChannelPolicy="SslAllow" /> <authentication> <basicAuthentication enabled="true" /> <customAuthentication> <providers> <add name="IisManagerAuth" enabled="true" /> </providers> </customAuthentication> </authentication> </security> </ftpServer> </site> ... <location path="MySite"> <system.ftpServer> <security> <authorization> <add accessType="Allow" users="MyFtpLogin" permissions="Read, Write" /> </authorization> </security> </system.ftpServer> </location> If I connect to the Site (not FTP) from my local IIS Manager using the same IIS Manager account details then it connects fine, I can browse files and change settings as I would locally (though I don't seem to have an option to upload files). Trying to connect via FTP though either through the browser or FileZilla etc... gives me: Status: Resolving address of www.mydomain.co.uk Status: Connecting to 123.456.12.123:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: USER MyFtpLogin Response: 331 Password required for MyFtpLogin. Command: PASS ********* Response: 530 User cannot log in. Error: Critical error Error: Could not connect to server I have tried collecting etw traces for ftp sessions, in the logs I get a FailBasicLogon followed by a FailCustomLogon, but no other info: FailBasicLogon SessionId={cad26a97-225d-45ba-ab1f-f6acd9046e55} | ErrorCode=0x8007052E StartCustomLogon SessionId={cad26a97-225d-45ba-ab1f-f6acd9046e55} | LogonProvider=IisManagerAuth StartCallProvider SessionId={cad26a97-225d-45ba-ab1f-f6acd9046e55} | provider=IisManagerAuth EndCallProvider SessionId={cad26a97-225d-45ba-ab1f-f6acd9046e55} EndCustomLogon SessionId={cad26a97-225d-45ba-ab1f-f6acd9046e55} FailCustomLogon SessionId={cad26a97-225d-45ba-ab1f-f6acd9046e55} | ErrorCode=0x8007052E FailFtpCommand SessionId={cad26a97-225d-45ba-ab1f-f6acd9046e55} | ReturnValue=0x8007052E | SubStatus=ERROR_DURING_AUTHENTICATION In the normal FTP logs I just get: 2012-10-23 16:13:11 123.456.12.123 - 123.456.12.123 21 ControlChannelOpened - - 0 0 e2d4e935-fb31-4f2c-af79-78d75d47c18e - 2012-10-23 16:13:11 123.456.12.123 - 123.456.12.123 21 USER MyFtpLogin 331 0 0 e2d4e935-fb31-4f2c-af79-78d75d47c18e - 2012-10-23 16:13:11 123.456.12.123 - 123.456.12.123 21 PASS *** 530 1326 41 e2d4e935-fb31-4f2c-af79-78d75d47c18e - 2012-10-23 16:13:11 123.456.12.123 - 123.456.12.123 21 ControlChannelClosed - - 0 0 e2d4e935-fb31-4f2c-af79-78d75d47c18e - If anyone has any ideas than I would be very grateful to hear them. Many thanks.

  Read the article

• SMTP error 503 when sending mail with Windows Mail & Mobile Me:

  - by Marty Pitt

  I've started getting an error on my windows machine when sending an email through Windows Mail, using Mobile Me: An unknown error has occurred. Subject 'Test' Server Error: 503 Server Response: 503 5.7.0 TLS already in use. Server: 'smtp.me.com' Windows Live Mail Error ID: 0x800CCC65 Protocol: SMTP Port: 587 Secure(SSL): Yes I've checked and double-checked my credentials, and outbound mail settings, and they're correct. I've deleted and re-added the account, and I get the same issue. I'm able to receive email fine. Note - this issue only affects one PC - my laptop has no issues. Any suggestions on what Error 503 means, or how I would fix this?

  Read the article

• Windows 7 Internet Sharing - How to have simultaneous Internet Access to my client

  - by Marl

  The condition: I'm running on windows 7, I'm using a usb broad band for my computer, then my computer is connected to the router tp-link tl-wr340g (in this sense my computer is the internet source since my router has no usb port for this type of broad band). I set the broad band to have internet sharing. I got 3-4 client connected through the router. The problem is whenever a client is using the internet, other clients including me don't have internet connection, additionally, If I have the internet access other clients don't have internet access. In my setup in windows XP (bridging the broad band and the router network) it works perfectly fine, every one has simultaneous internet. To clarify, how can I have all clients including me have internet connection simultaneously in my windows 7 OS? //Additionally, the create "network bridge" setup is missing, from this link the "Bridge Connection is missing", how can I fix that?

  Read the article

• Can I set up OpenVPN on two or more machines so that they can each act as client and server?

  - by ianfuture

  The question summarises what I want to achieve. In more detail: I have a Windows XP Pro PC at a work location that I want to be able to access my home Windows XP Pro PC and other home computers from. But I also want to be able to connect to the work PC from home. I think the term generally used is a "mesh" network. Can I do this with OpenVPN ? If so how would I do it? What are the most important things to remember to do? EDIT: The work Windows XP Pro PC is largely managed by IT Dept, I do have local admin rights to install things. Some settings are disabled. My main concern was firewalls and port forwarding on the work PC. Any suggestions?

  Read the article

• What could cause my LAN Pings be greater than 100ms?

  - by James Holland

  I have 2 servers (Both: Windows Server 2008, Dual Xeon 2.8Ghz, 32GB RAM, 8 x 15k SAS Drives). One of them is a DC / Web server / Exchange Server, the other is a SQL Server (2008). I have a 48 port Netgear GS748T Gigabit switch. When I ping from server to server, I get ping times <1ms, great, but when I ping from a PC, I get varying pings from the occasional <1ms to 500ms!! If I log into either server and look at Task Manager, CPU usage peaks at 20%, memory usage is 100%, but I am led to believe this is normal as Exchange will just use as much as you have, and release it when requested. Network usage peaks at 1%. I really don't understand how the ping can vary that much. I know I am giving very little info, but this is all I know, I apologise, but can anyone help? In response to question, I have pinged by both IP address and hostname, no difference in ping times.

  Read the article

• SATA Backward compatibility? [closed]

  - by Fladur

  Possible Duplicate: Can I connect a SATA-II hard drive to a SATA-I connection? Hello everyone One of my system is really old, but I still use it, right now, the HDD is and old IDE drive that is starting to fail (I got to many damaged sectors) and I'm planing to replace it. The motherboard supports Serial ATA 1 and I have a real nice offer on a SATA 2 drive, can I use that drive on a SATA 1 interface (obviously with reduced speed) just like a USB 2.0 device on a 1.0 port? Thanks in advance.

  Read the article

• Can't run node.js script on server reboot

  - by webstyle

  I need to listen events on port 3240 and I'm using node.js for that purpose. I need to execute my script with forever tool. I also need to run forever on server reboot. When I run forever glh.js everything works: forever list says there is a running process. But when I'm trying to run forever on server reboot I can't get it working. I've created a file in /etc/init.d with the following content: #!/bin/bash /var/www/yan/data/gitlabhook/runglh.sh &>/var/www/yan/data/gitlabhook/runglh.log When I reboot the server, the output log is the following (the same as when I run it manually via console): info: Forever processing file: glh.js But in this case forever doesn't start a process. forever list outputs: info: No forever processes running

  Read the article

• Is to possible to achieve the SATA II's 3Gbps (375MBps) between home network storage and home computers?

  - by techaddict

  Gigabit ethernet only has 1Gbps (125MBps), whereas SATA II has up to three times that rate. Is it possible to achieve the rate of three times Gigabit ethernet connection which is SATA II speeds, between home network storage and the laptops and desktops with SATA II hard drives? If so, how? Or, is the limitation of a gigabit ethernet port on the laptops the limitng factor, making 1000Gbps the fastest practical transfer speed possible? (practical, meaning that without taking apart the laptop and doing physical modifications like branching a SATA II transfer cable, etc.) -- I just realized -- wouldn't a USB 3.0 cable do the trick? Since USB 3.0 can reach up to 675MBps?

  Read the article

• Is there a free-embedded SSH solution ?

  - by ereOn

  Hi, I'm working for an important company which has some severe network policies. I'd like to connect from my work, to my home linux server (mainly because it allows me to monitor my home-automated installation, but that's off-topic) but of course, any ssh connection (tcp port 22) to an external site is blocked. While I understand why this is done (to avoid ssh tunnels I guess), I really need to have some access to my box. (Well, "need" might be exagerated, but that would be nice ;) Do you know any web-based solution that I could install on my home linux server that would give me some pseudo-terminal (served using https) embedded in a web page ? I'm not necessarily looking for something graphical: a simple web-embedded ssh console would do the trick. Or do you guys see any other solution that wouldn't compromise network security ? Thank you very much for your solutions/advices.

  Read the article

• Configuring Apache reverse proxy

  - by Martin

  I have loadbalancer server and edges. I am trying to configure reverse proxy in order to hide the backend servers PL1,2,3. PL 1,2,3 are not located in same subnet. They are located in different locations. PL1 Lb1 -> PL2 PL3 I tried to configure Apache reverse proxy but it is not sending request to PL1,2,3. Reverse proxy worked only when I configured apache to send request to local server on other port. ProxyRequests Off <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass /PL1 http://PL1server.com/ ProxyPassReverse /PL1 http://PL1server.com/ The above configuration did not worked. Could you help me to solve the issue. Or is there other proxy types like Squid,Socks5 to solve this issue. Does the reverse proxy fails if we use IP address or domain URL in ProxyPass and ProxyPassReverse ?

  Read the article

• How do I send mail from Tripwire using SMTP?

  - by ThomasG33K

  I have just installed tripwire using Ubuntu repos and have gone into the configuration files and changed everything to what I want. When in comes to the options for SMTP mail method and the server and port to use, I am stumped. When I run the test email I get this error message. /usr/sbin/tripwire --test --email blah@nowhere Sending a test message to: blah@nowhere ### Error: The SMTP connection could not be established. ### Server: localhost ### Exiting... Email test failed. I have made appropriate changes to the firewall. I don't have an smtp server installed. Do I need to? Any other ways I could use without installing an SMTP server due to security issues?

  Read the article

• Tomcat: how to change location of manager and host-manager to a subdirectory

  - by rolandpish

  Hi there. I'm running a Tomcat 6.0.28 at port 8080 in a Debian Squeeze box. I'm a newbie in tomcat. I would like to change the location of manager and host-manager applications. That is, instead of going to: http://myserver:8080/manager/html I would like that to be: http://myserver:8080/somesubdirectory/manager/html Is this possible? If yes, how can I achieve this? I would really appreciate any help in this. I've been trying to change the context of /etc/tomcat6/Catalina/localhost/manager.xml from /manager to /somesubdirectory/manager with no success. Also I tried to create a symlink under /var/lib/tomcat6/webapps/ROOT/somesubdirectory/manager with no success. Thanks in advance. Cheers.

  Read the article

• Gathering IP's from a complicated log

  - by Harry

  I have a question regarding the use of some more advanced grep, awk, sed. I have a log file, for a proprietary MTA, that contains IP's in a string, delimited by [redacted]^~x.x.x.x^[redacted]. So far all of my grepping, awking, and sedding hasn't gotten me very far. This log file has 331520 lines in it. My goal was to simply grep out the ip's, then do a for loop with sed, to sed 's/$i/redacted'. I'm including a sample of one of the log entries. If you all have any idea, I would be greatly appreciative. Jun 4 15:21:52 host.name mta-name: 13388^~88/CC-04671-FCA0DCF4^~D^~<redactedmessageid>^~@^[email protected]^~redacted.hostname^~000.00.000.000^~port^~esmtp^~^~external_routing_nobounce^~0^~0.51^~subjectofmessage^~250 2.6.0 <redactedmessageid> [InternalId=2178458] Queued mail for delivery

  Read the article

• Troubleshooting MySQL : can connect to localhost but not to 127.0.0.1 or IP

  - by mireille raad

  Hello, I'd appreciate some help on this, it is bit tricky to find the correct keywords to google :) Using PHP i am able to connect using the following connection string : $link = mysql_connect('localhost', 'wlek' , 'wlek'); but when i use 127.0.0.1 or 10.10.40.15 (self-IP), i am getting connection failed Could not connect: Can't connect to MySQL server on '10.10.40.15' (13) I used yum install mysql , yum install php yum install php-mysql 1 - is there anything more i should install for php ? 2 - any troubleshooting tips ? 3 - what keywords, links do u recommend | % | mir | xdb | | 10.10.40.15 | mir | xdb | | localhost | mir | xdb | [mysqld] datadir=/var/lib/mysql socket=/var/lib/mysql/mysql.sock user=mysql port=3306 bind-address=0.0.0.0 old_passwords=1 [mysqld_safe] log-error=/var/log/mysqld.log pid-file=/var/run/mysqld/mysqld.pid ~ appreciate it :)

  Read the article

• My linux server takes more than an hour to boot. Suggestions?

  - by jamieb

  I am building a CentOS 5.4 system that boots off a compact flash card using a card reader that emulates an IDE drive. It literally takes about an hour to boot. The ultra-slow part occurs when Grub is loading the kernel. Once that's done, the rest of the boot process only takes about a minute to get to a login prompt. Does anyone have any suggestions? I suspect that it may have to do with UDMA. Everything IDE-related in my BIOS seems to checkout. The read performance hdparm is telling me 1.77 MB/s. Ouch! (But even at that rate, it still shouldn't take an hour to decompress and load the kernel) [root@server ~]# hdparm -tT /dev/hdc /dev/hdc: Timing cached reads: 2444 MB in 2.00 seconds = 1222.04 MB/sec Timing buffered disk reads: 6 MB in 3.39 seconds = 1.77 MB/sec Trying to enable DMA is a no-go though: [root@server ~]# hdparm -d1 /dev/hdc /dev/hdc: setting using_dma to 1 (on) HDIO_SET_DMA failed: Operation not permitted using_dma = 0 (off) Here's some command outputs that might help: System [root@server ~]# uname -a Linux server.localdomain 2.6.18-164.el5xen #1 SMP Thu Sep 3 04:47:32 EDT 2009 i686 i686 i386 GNU/Linux PCI info: [root@server ~]# lspci -v 00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02) Subsystem: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub Flags: bus master, fast devsel, latency 0 Capabilities: [e0] Vendor Specific Information 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) (prog-if 00 [VGA controller]) Subsystem: Intel Corporation 82945G/GZ Integrated Graphics Controller Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at fdf00000 (32-bit, non-prefetchable) [size=512K] I/O ports at ff00 [size=8] Memory at d0000000 (32-bit, prefetchable) [size=256M] Memory at fdf80000 (32-bit, non-prefetchable) [size=256K] Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Capabilities: [d0] Power Management version 2 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 Flags: bus master, medium devsel, latency 0, IRQ 16 I/O ports at fe00 [size=32] 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 Flags: bus master, medium devsel, latency 0, IRQ 17 I/O ports at fd00 [size=32] 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 Flags: bus master, medium devsel, latency 0, IRQ 18 I/O ports at fc00 [size=32] 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 Flags: bus master, medium devsel, latency 0, IRQ 19 I/O ports at fb00 [size=32] 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller Flags: bus master, medium devsel, latency 0, IRQ 16 Memory at fdfff000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 [Subtractive decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: 00000000fdd00000-00000000fdd00000 Capabilities: [50] #0d [0000] 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) Subsystem: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge Flags: bus master, medium devsel, latency 0 Capabilities: [e0] Vendor Specific Information 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01) (prog-if 80 [Master]) Subsystem: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 17 I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at f800 [size=16] Capabilities: [70] Power Management version 2 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) Subsystem: Intel Corporation 82801G (ICH7 Family) SMBus Controller Flags: medium devsel, IRQ 17 I/O ports at 0500 [size=32] 01:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ Flags: bus master, medium devsel, latency 32, IRQ 18 I/O ports at de00 [size=256] Memory at fdeff000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 01:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ Flags: bus master, medium devsel, latency 32, IRQ 17 I/O ports at dc00 [size=256] Memory at fdefe000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 01:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ Flags: bus master, medium devsel, latency 32, IRQ 19 I/O ports at da00 [size=256] Memory at fdefd000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 hdparm ouput: [root@server ~]# hdparm /dev/hdc /dev/hdc: multcount = 0 (off) IO_support = 0 (default 16-bit) unmaskirq = 0 (off) using_dma = 0 (off) keepsettings = 0 (off) readonly = 0 (off) readahead = 256 (on) geometry = 8146/16/63, sectors = 8211168, start = 0 [root@server ~]# hdparm -I /dev/hdc /dev/hdc: ATA device, with non-removable media Model Number: InnoDisk Corp. - iCF4000 4GB Serial Number: 20091023AACA70000753 Firmware Revision: 081107 Standards: Supported: 5 Likely used: 6 Configuration: Logical max current cylinders 8146 8146 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 8211168 LBA user addressable sectors: 8211168 device size with M = 1024*1024: 4009 MBytes device size with M = 1000*1000: 4204 MBytes (4 GB) Capabilities: LBA, IORDY(can be disabled) Standby timer values: spec'd by Vendor R/W multiple sector transfer: Max = 2 Current = 2 DMA: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: * Power Management feature set * WRITE_BUFFER command * READ_BUFFER command * NOP cmd * CFA feature set * Mandatory FLUSH_CACHE HW reset results: CBLID- above Vih Device num = 0 CFA power mode 1: enabled and required by some commands Maximum current = 100ma Checksum: correct

  Read the article

• How can I secure Postgres for remote access when not in a private network?

  - by orokusaki

  I have a database server on a VMWare VM (Ubuntu 12.04.1 LTS server), and it just occurred to me that the server is accessible via the web, since the same physical server contains a VM that hosts public websites. My iptables in the database are such that only SSH traffic, loopback traffic, and TCP on port 5432 are allowed. I will only allow host access to the Postgres server from the IP of the other VM on the same physical machine. Does this seem sufficient for security, assuming there aren't gaping holes in my general OS configuration, or is Postgres one of those services that should never be web facing, (assuming there are some of "those"). Will I need to use hostssl instead of host in my pg_hba.conf, even though the data will travel only on my own network, presumably?

  Read the article

• Error with FTP since binding via httpcfg

  - by Linda

  I was in a similar posistion to this question and bound two IP addresses using httpcfg. Since doing this ftp does not seem to be working on IIS6 in Windows Server 2003. Any ideas what could be wrong? The command I ran was: httpcfg set iplisten -i xxx.xxx.x.x I get the following when I try to conenct via Filezilla: Error: Connection timed out Error: Failed to retrieve directory listing The log file is returning the following: #Software: Microsoft Internet Information Services 6.0 #Version: 1.0 #Date: 2009-08-17 13:54:05 #Fields: date time c-ip cs-username cs-method cs-uri-stem sc-status sc-win32-status 2009-08-17 13:54:05 91.85.70.17 Client [1]USER Client 331 0 2009-08-17 13:54:05 91.85.70.17 Client [1]PASS - 230 0 In the ftp site settings I have the site pointing to the IP address used using httpcfg and the port set to 21. Update: I can see a directory listing if I connect via the inbuilt commandline ftp client in wondows vista. If I try to connect via a windows explorer I start in the incorrect folder and no files are listed just directories.

  Read the article

• tcp flags in iptables: What's the difference between RST SYN and RST and SYN RST ? When to use ALL?

  - by Kris

  I'm working on a firewall for a virtual dedicated server and one of the things I'm looking into is port scanners. TCP flags are used for protection. I have 2 questions. The rule: -p tcp --tcp-flags SYN,ACK,FIN,RST SYN -j DROP First argument says check packets with flag SYN Second argument says make sure the flags ACK,FIN,RST SYN are set And when that's the case (there's a match), drop the tcp packet First question: I understand the meaning of RST and RST/ACK but in the second argument RST SYN is being used. What's the difference between RST SYN and RST and SYN RST ? Is there a "SYN RST" flag in a 3 way handshake ? Second question is about the difference between -p tcp --tcp-flags SYN,ACK,FIN,RST SYN -j DROP and -p tcp --tcp-flags ALL SYN,ACK,FIN,RST SYN -j DROP When should ALL be used ? When I use ALL, does that mean if the tcp packet with the syn flag doesn't have the ACK "and" the FIN "and" the RST SYN flags set, there will be no match ?

  Read the article

< Previous Page | 463 464 465 466 467 468 469 470 471 472 473 474  | Next Page >