Search Results

Search found 15160 results on 607 pages for 'boot disk'.

Page 468/607 | < Previous Page | 464 465 466 467 468 469 470 471 472 473 474 475  | Next Page >

• Can I change from BIOS IDE mode to AHCI mode at any time?

  - by Software Monkey

  Currently my Windows 7 computer is crashing during startup, after loading the AMD achix64s.sys driver, if I enable BIOS AHCI mode for the disks. It boots fine with IDE mode. Since I need my computer working, I am wondering if I can just use IDE mode for now, and later change to AHCI mode, when I figure out what is wrong. Background: I was running RAID mode, which needed additional drivers to install/boot Windows. But the MoBo RAID is flaky so I'm trying to switch to using a Windows mirrored volume instead - for that I expected to use AHCI mode.

  Read the article

• My NTFS Partition keeps becoming "unusable" on Ubuntu, Any Ideas?

  - by gopherman

  I just purchased a new 2TB Drive External Seagate, My main system uses both Windows and Ubuntu So I am pretty much stuck with keeping my drive as NTFS. I have done this without any problems before but since I got this new drive I have been having issues. When I first load up Ubuntu the drive mounts and runs fine, after an unspecified amount of time i start getting Input/Output errors when accessing the drive. When I goto the Disk Utility I get a message stating the drive is "Unknown or Unused", If I disconnect and reconnect the drive or reboot everything is fine again. There's no errors coming up with S.M.A.R.T and it seems to work fine while under windows. Any thoughts?

  Read the article

• My NTFS Partition keeps becoming "unusable" on Ubuntu, Any Ideas?

  - by gopherman

  I just purchased a new 2TB Drive External Seagate, My main system uses both Windows and Ubuntu So I am pretty much stuck with keeping my drive as NTFS. I have done this without any problems before but since I got this new drive I have been having issues. When I first load up Ubuntu the drive mounts and runs fine, after an unspecified amount of time i start getting Input/Output errors when accessing the drive. When I goto the Disk Utility I get a message stating the drive is "Unknown or Unused", If I disconnect and reconnect the drive or reboot everything is fine again. There's no errors coming up with S.M.A.R.T and it seems to work fine while under windows. Any thoughts?

  Read the article

• Why has my Mac been running fsck_hfs for two days now?

  - by Nate

  I first noticed that fsck_hfs was running, taking up 50-75% of a CPU, yesterday. It continues to run today. ps shows that it is doing /sbin/fsck_hfs -f -n -x -E /dev/disk3. Only problem: I don’t think I have a /dev/disk3. Why is it running? Will it ever finish? Can I kill it? What is /dev/disk3? Could it be my Time Machine volume, which is not mounted at the moment? System Info: MacBook Pro (2008). It has two disks installed—the internal disk (/dev/disk1) and a PC Card SSD (/dev/disk0, surprisingly). It connects to a remote Time Machine volume attached to an Airport Extreme base station.

  Read the article

• Improve efficiency when using parallel to read from compressed stream

  - by Yoga

  Is another question extended from the previous one [1] I have a compressed file and stream them to feed into a python program, e.g. bzcat data.bz2 | parallel --no-notice -j16 --pipe python parse.py > result.txt The parse.py can read from stdin continusuoly and print to stdout My ec2 instance is 16 cores but from the top command it is showing 3 to 4 load average only. From the ps, I am seeing a lot of stuffs like.. sh -c 'dd bs=1 count=1 of=/tmp/7D_YxccfY7.chr 2>/dev/null'; I know I can improve using the -a in.txtto improve performance, but with my case I am streaming from bz2 (I cannot exact it since I don't have enought disk space) How to improve the efficiency for my case? [1] Gnu parallel not utilizing all the CPU

  Read the article

• Would upgrading memory from 4GB to 8GB on my laptop solve swapping issues?

  - by Tom

  I have a laptop with 4GB of memory with Windows 7 on it and I often experience with Eclipse that it is swapped out to disk. On the net they usually write 4GB of RAM is more than enough for average use and aside from Eclipse+Android Emulator I don't really use other extra apps, yet Eclipse is always swapped out if I haven't used it for a while (say, 1 day) and it is annoying it to wait for it to be resurrected from swap. My question is: would an upgrade to 8GB solve the issue of swapped out applications? With 8GB would windows 7 keep everything in memory? Or it wouldn't change anything and Eclipse would be swapped out regardless of the amount of memory, because Win 7 has a habit of kicking out every application from memory which hasn't be used for a while?

  Read the article

• Dell Inspiron 1501 battery no longer "recognized"

  - by mwalling

  My parents were on vacation last weekend and franticly called me saying that they couldn't get their Inspiron 1501 to boot anymore without the BIOS whining about the battery. Before this happened, they said the "battery went dead with negligible pre-warning". On bootup, the computer says: WARNING: The battery cannot be identified. This system will be unable to charge this battery. With options to enter the BIOS or continue booting. I got to look at the machine last night. The battery still holds a charge, and will recharge. Windows detects it as a DellPY9617 battery manufactured by "DynaPack". I didn't get the BIOS revision, but the machine's ship date was 7/21/2007. The recommendations I could find on the internet varied from "discharge the battery completely" to "your computer is too old" to "update the BIOS", and wanted a more specific answer before doing something drastic.

  Read the article

• Can I move my Picasa data from one machine to another?

  - by Stuart Hemming

  I have lots of photos stored on an external hard disk. I have Picasa installed on my Windows 7 laptop and have spent a lot of time cataloging the collection, put names to faces and the like. I now have a new machine and I want all the hard work I did on my laptop to be available when I plug my external HD in to the new machine. Is there a magic spell I need to cast to make this happen? Or is all the data I need stored with the photos?

  Read the article

• Multiple users writing to one Samba mount point in OSX

  - by Sam

  I have an OSX box containing a script which writes a unique file to a Samba share. The first part of the script mounts the share. On the machine are 2 users- UserA and UserB. Each requires to run this script at any given time however only the user who mounted the share is able to write to it. I really need both users to have rwx access. Here is what I have tried: Mounting then chmod'ing the mountpoint (no effect- overruled by Samba server?) chmod'ing the mountpoint then mounting (same as above) sudo mount_smbfs Both users have admin privileges. Ideally a solution would be executable by one of the users (contained in the script) and not rely on mounting at machine boot time. Any ideas appreciated, thanks!

  Read the article

• Move/migrate vbox virtual machine to another computer along with snapshots

  - by user53864

  I have sun virtualbox(2.2) installed on windows xp and I've some VMs(ubuntu server) running with many snapshots . How do I move virtualbox VDIs along with all the snapshots to new windows system?. I tried copying the base vdi and creating it newly on a new system and it worked fine but could not move the snapshots of the vms. I even tried copying Virtualbox.xml and machine's xml file to the new system and manually editing the snapshots location to the new place in the virtualbox.xml file, the snapshots are listed in the snapshots tab(but when I checked snapshots location in the vm's settings it's showing the default location having edited it) but when I try to use the snapshots, reverting to current, it's not booting(some snapshots giving grub 2 error, some got stalled at the boot). I also tried export and import but only current state I could export and use it on the new system with no snapshots. Is there any way I could achieve this?. Please need help...

  Read the article

• Program that converts Windows 7 install files into iso

  - by Stephen R

  I recently got to build a custom image of Windows 7 and I can successfully install it on other computers. The problem I have is right now I have to do the installs from a bootable hard drive. I would much rather do this from a disk or ISO. I know there is a program that will take the Windows 7 system files and convert it to ISO image, but I can't think of it. Otherwise, could I just simply burn the files to a DVD? Would that work?

  Read the article

• Linux USB to work as cd rom on mac

  - by user157483

  I am working in driver development in linux USB modules. I have written driver for usb and it is working as cd rom in windows machine 1)I made first partation as fat32 "modprobe g_hidmass file=/dev/mmcblk0p1 cdrom=1 stall=0 removable=1" this works fine in windows 2)I made first partation as hfs partation "modprobe g_hidmass file=/dev/mmcblk0p1 cdrom=1 stall=0 removable=1" but same thing i applied with hfs partation in MAC it is getting error like this "The disk you inserted was not readable by this computer" in diskutil it is shown as CD-rom but not reading the file system. frame like this Please help me how can I overcome this error...

  Read the article

• Minimize writes to SSD disks with Windows 7

  - by mark

  Most people use their SSD as their primary system installation disk with Windows 7. W7 already has a lot of optimizations for SSDs, both in terms of performance and lifetime. Minimizing writes increases the lifetime of SSDs, so post each suggestion as an answer and let others vote on them. Update: I'm not sure anymore that minimizing writes is a good thing [tm], hard facts that SSDs will degrade within a noticeable time are missing and it seems this it can create a bit FUD about the functionality of the SSD. In other words: I question the usefulness of my wiki question.

  Read the article

• File corruption

  - by firesoul

  Recently, almost every file I try to copy into my HDDs gets corrupted. When writing to the disk, some portion of the file is replaced by random bytes (Checked using Diff apps) There's no problem reading existing files. I'm pretty sure it's not the HDD, becasue I've tried another HDD (a brand new 1TB WD) and the problem still remains. I have an AMD Athlon 64 X2 CPU, an ASUS M2NE motherboard, 2 WD SATA II HDDs (320GB + 1TB) and 3GB of Corsair RAM. My OS is Windows 7 (64 bit) Now, what could be the cause of this? If it's the motherboard, can it be fixed by using a PCI SATA card?

  Read the article

• Reset my windows server 2003

  - by Tim Thoirp

  I was recently given an HP Proliant Server from a friend as a gift. It has Windows Server 2003 installed on it. When I go to boot the system however to log in to Windows Server 2003 it requires an Admin password. I can't figure out the password and my friend doesn't know it either as it has been years since hes used the machine. I don't care about any of the data on the machine I just want to have a new clean version of Windows server 2003 running on it. Any advice would be helpful? And no I don't want to pay for a password cracking tool. Thanks

  Read the article

• Best usb storage for my router, Asus RT-AC66U?

  - by Jason94

  I have the ASUS RT-AC66U and I want to add a USB storage to it. It has 2x USB, and Im already using one for my printer. So the last one I want to use to attach a USB storage, and I've read some reviews stating the throughput of the USB could be up to 18 mb/s. So in regard of USB storage, should I care about hard disk cache? Simple powered-over-usb seems to have 8 mb cache, other (externally powered) has 16 for instance.

  Read the article

• Install Windows with QEMU

  - by Radium

  I want to understand if it is possible to install Windows from Qemu to a physical HDD. I was trying to do that by doing something like this: qemu-system-x64 -m1024 -vnc :1 -hda /dev/sda -cdrom .../Windows.iso Installed successfully. But when i tried to boot normally got a blue screen telling me that a hardware change appeared so go away. I guess the problem is not because of QEMU-CPU emulation or smth, but because of HDD`s UID change which is used inside of Windows registry. Am i right? So if yes how to workaround this? Maybe i need to prepare Windows before the reboot? I have successfully installed FreeBSD via QEMU and thought with Windows it will go the same ...

  Read the article

• Late Model 2011 Macbook Pro with SSD appears to be off somehow

  - by chris

  Ok, I just got a SSD for my Macbook Pro Late-2011. The specs from what I read are that the laptop is capable of 6gbps, so I got myself a OZC Agility 240gb 6gbps SSD. Decided to join the club and speed test it with Blackmagic Disk Speed Test.. and the results are equivilent to that of a 3gbps setup. So.. I am wondering overall is there a configuration setting somewhere I can tweak? The original HD was a 500gb HDD the spinning kind. So I'm figuring maybe thats why there may be a setting somewhere hidden I dunno about that I can tweak, just wanna see if anyone else knows if this is the case. edit should also mention did a fresh factory install, nothing carried over from original hd

  Read the article

• How to automate slipstream?

  - by Gregory MOUSSAT

  Since years I use slipstreamed Windows installations. This works very well, but preparing them is tedious : 1 - install a Windows with the last slipstreamed version we have (automated install) 2 - check Windowsupdate to see what's new, and take note 3 - download each new update available 4 - go to step 2 until no new update is available 5 - slipstream them into the last version we have (I already automated this step) I'd like a way to automate parts or all of this. Maybe a program able to know which updates are installed (already saw one, I don't remember which, and I know PowerShell can do this)... and able to download them ? Or to get them from local disk ? So the steps become : 1 - install a Windows with the last slipstreamed version we have (automated install) 2 - use Windowsupdate until no new update is available (any way to automate ?) 3 - use the magic program 4 - slipstream

  Read the article

• Why does my USB stick not show up in Windows Vista?

  - by Kjensen

  Just reinstalled a Lenovo laptop with Vista. Two separate USB sticks, that work fine on another computer, will not show up on this Vista computer. USB ports work fine for other stuff. USB sticks worked before I reinstalled the computer. After looking around, I tried going into Disk management, to see if they appear there - they don't. Is there some sort of service, that might be disabled, not allowing removable drives to mount? Or what else can be wrong?

  Read the article

• Finding throuput of CPU and Hardrive on Solaris

  - by Jim

  How do I find the throughput of a CPU and the hard disk on an OpenSolaris machine? Using mpstat or iostat? I'm having a hard time identifying the throughput if it is given at all in the commands output. For example, in mpstat there is very little explanation as to what the columns mean. I've been using the syscl column divided by time interval to find the throughput but to be honest I have no idea what a system call truly is. I'm trying to to analyze a hardrive and CPU while writing a file to the hardisk and when at rest.

  Read the article

• How to setup VM in KVM? Qcow or LVM etc.

  - by JohnAdams

  Finally, after quite a bit of this vs that, I have chosen to virtualize a couple of my servers with KVM. I did do a test setup as well, but I have a few questions about setting VM's in KVM. Would appreciate pointers. What is the best storage to use - Qcow2 or LVM? I like the fact that I can copy the VM file easily with a Qcow2 but what about LVM, how do I take a backup or make copy on a development server to play with? I know I can clone a LVM, but how do I bring to my development server? How do I setup the guest partitioning? For example, when setting up Ubuntu inside Ubuntu, do I choose LVM for that VM or regular fdisk partitioning? Can I increase the partition size then later, if I need a bigger disk?

  Read the article

• X server not starting up after new kernel compilation

  - by tech_learner

  I have compiled the Kernel on my 64-bit Debian XPS Studio 1340 Dell system. srikanth@debian:~ - 05:40:52 PM - $ uname -a Linux debian 2.6.32-5-amd64 #1 SMP Thu Mar 22 17:26:33 UTC 2012 x86_64 GNU/Linux Kernel version that I have used and compiled from kernel.org is 2.6.35.13 I have nvidia installed on old kernel. I got the old config and I used the same config to compile the new kernel. Everything went well and I got two debian packages ( image and headers ) which I have installed on my system. When I select the new kernel on the boot menu and I go into it, the X server is not starting up possibly because I have to "rebuild" ( not sure how to do that ) according to this link: http://www.linuxquestions.org/questions/slackware-14/x-server-not-starting-after-kernel-compilation-605265/ Can you suggest how to do the rebuild on nvidia module so that I can start x ( without seeing any blank screen or error saying nvidia module is missing ) ? PS: The link that I have used to compile the kernel is https://help.ubuntu.com/community/Kernel/Compile#Alternate_Build_Method:_The_Old-Fashioned_Debian_Way

  Read the article

• What's the best encoding for videos on the Zune?

  - by Will

  I've got videos I want to encode to put on the zune. Have the encoding software (using Expression Encoder), but I'm not sure about what I should transcode to. I used the settings built into EE for the Zune, but the sync software still shows these videos are being converted before sync. I already have to get these videos into an acceptable format, so encoding twice is a waste of time and space. What I'm looking for is a video codec, audio codec, bitrate, WxH, and anything else I need to encode a video so it goes straight from my disk onto my Zune without re-encoding.

  Read the article

• Putting a whole linux server under source control (git)

  - by Tobias Hertkorn

  I am thinking about putting my whole linux server under version control using git. The reason behind it being that that might be the easiest way to detect malicious modifications/rootkits. All I would naively think is necessary to check the integrity of the system: Mount the linux partition every week or so using a rescue system, check if the git repository is still untempered and then issue a git status to detect any changes made to the system. Apart from the obvious waste in disk space, are there any other negative side-effects? Is it a totally crazy idea? Is it even a secure way to check against rootkits since I most likely would have to at least exclude /dev and /proc ?

  Read the article

< Previous Page | 464 465 466 467 468 469 470 471 472 473 474 475  | Next Page >