Search Results

Search found 44940 results on 1798 pages for 'first rock'.

Page 468/1798 | < Previous Page | 464 465 466 467 468 469 470 471 472 473 474 475  | Next Page >

• Multiple SSL Certificates Running on Mac OS X 10.6

  I have been running into walls with this for a while, so I posted at stackoverflow, and I was pointed over here... I am attempting to setup multiple IP addresses on Snow Leopard so that I can develop with SSL certificates. I am running XAMPP - I don't know if that is the problem, but I guess I would run into the same problems, considering the built in apache is turned off. So first up I looked into starting up the IPs on start up. I got up an running with a new StartupItem that runs correctly, because I can ping the ip address: ping 127.0.0.2 ping 127.0.0.1 And both of them work. So now I have IP addresses, which as you may know are not standard on OSx. I edited the /etc/hosts file to include the new sites too: 127.0.0.1 site1.local 127.0.0.2 site2.local I had already changed the httpd.conf to use the httpd-vhosts.conf - because I had a few sites running on the one IP address. I have edited the vhosts file so a site looks like this: <VirtualHost 127.0.0.1:80> DocumentRoot "/Users/jim/Documents/Projects/site1/web" ServerName site1.local <Directory "/Users/jim/Documents/Projects/site1"> Order deny,allow Deny from All Allow from 127.0.0.1 AllowOverride All </Directory> </VirtualHost> <VirtualHost 127.0.0.1:443> DocumentRoot "/Users/jim/Documents/Projects/site1/web" ServerName site1.local SSLEngine On SSLCertificateFile "/Applications/XAMPP/etc/ssl-certs/myssl.crt" SSLCertificateKeyFile "/Applications/XAMPP/etc/ssl-certs/myssl.key" SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown <Directory "/Users/jim/Documents/Projects/site1"> Order deny,allow Deny from All Allow from 127.0.0.1 AllowOverride All </Directory> </VirtualHost> In the above code, you can change the 1's to 2's and it is the setup for the second site. They do use the same certificate, which is why they are on different IP addresses. I also included the NameVirtualHost information at the top of the file: NameVirtualHost 127.0.0.1:80 NameVirtualHost 127.0.0.2:80 NameVirtualHost 127.0.0.1:443 NameVirtualHost 127.0.0.2:443 I can ping site1.local and site2.local. I can use telnet ( telnet site2.local 80 ) to get into both sites. But in Safari I can only get to the first site1.local - navigating to site2.local gives me either the localhost main page (which is included in the vhosts) or gives me a Access forbidden!. I am usure what to do, any suggestions would be awesome.

  Read the article

• asterisk queues priority and penalty

  - by MealstroM

  queues.conf shared_lascall=yes strategy=rrmemory wrapuptime=15 A1,A2,A3 are members of 2 queues: queue1(Q1) and queue2(Q2) A3 has penalty 3 in Q1 where min/max penalty are 0/3 and A3 has penalty 0 at Q2 where min/max penalty are 0/3. A3 has just ended a call and is on wrapuptime pause. User1 (U1) enters Q1 with priority 10, and user2 (U2) enters Q2 with priority 15. A3 wrapuptime ends. What user U1 or U2 will be served first?

  Read the article

• "Can't Connect to Server" from 2nd virtual host on VPS

  - by chaoskreator

  I'm using Debian 7 Wheezy and Apache 2.2.22, and I'm setting up Virtual Hosts for a number of websites on my VPS. I've successfully configured the VirtualHost directives for one of the sites, but the second one continually gives "Problem Loading Page" in Firefox. I've run configtest and it has verified all my syntax is correct, and I've checked all the permissions. Everything on the 2nd domain is pretty much copy/pasted from the first, so I'm not sure what the issue is, as there are no entries into /var/log/apache2/error.log other than where I have reloaded the configurations: /# cat /var/log/apache2/error.log [Thu May 29 01:19:00 2014] [notice] Graceful restart requested, doing restart [Thu May 29 01:19:00 2014] [info] Init: Seeding PRNG with 656 bytes of entropy [Thu May 29 01:19:00 2014] [info] Init: Generating temporary RSA private keys (512/1024 bits) [Thu May 29 01:19:00 2014] [info] Init: Generating temporary DH parameters (512/1024 bits) [Thu May 29 01:19:00 2014] [debug] ssl_scache_shmcb.c(253): shmcb_init allocated 512000 bytes of shared memory [Thu May 29 01:19:00 2014] [debug] ssl_scache_shmcb.c(272): for 511920 bytes (512000 including header), recommending 32 subcaches, 133 indexes each [Thu May 29 01:19:00 2014] [debug] ssl_scache_shmcb.c(306): shmcb_init_memory choices follow [Thu May 29 01:19:00 2014] [debug] ssl_scache_shmcb.c(308): subcache_num = 32 [Thu May 29 01:19:00 2014] [debug] ssl_scache_shmcb.c(310): subcache_size = 15992 [Thu May 29 01:19:00 2014] [debug] ssl_scache_shmcb.c(312): subcache_data_offset = 3208 [Thu May 29 01:19:00 2014] [debug] ssl_scache_shmcb.c(314): subcache_data_size = 12784 [Thu May 29 01:19:00 2014] [debug] ssl_scache_shmcb.c(316): index_num = 133 [Thu May 29 01:19:00 2014] [info] Shared memory session cache initialised [Thu May 29 01:19:00 2014] [info] Init: Initializing (virtual) servers for SSL [Thu May 29 01:19:00 2014] [info] mod_ssl/2.2.22 compiled against Server: Apache/2.2.22, Library: OpenSSL/1.0.1e [Thu May 29 01:19:00 2014] [notice] Apache/2.2.22 (Debian) PHP/5.4.4-14+deb7u9 mod_ssl/2.2.22 OpenSSL/1.0.1e mod_perl/2.0.7 Perl/v5.14.2 configured -- resuming normal operations [Thu May 29 01:19:00 2014] [info] Server built: Mar 4 2013 22:05:16 [Thu May 29 01:19:00 2014] [debug] prefork.c(1023): AcceptMutex: sysvsem (default: sysvsem) I've ensured to enable each vhost with a2ensite {sitename.conf} with no errors there, either. Below are the contents of the configuration files... /etc/apache2/apache2.conf # Global configuration # LockFile ${APACHE_LOCK_DIR}/accept.lock PidFile ${APACHE_PID_FILE} Timeout 300 KeepAlive On MaxKeepAliveRequests 100 KeepAliveTimeout 5 ## ## Server-Pool Size Regulation (MPM specific) ## # prefork MPM # StartServers: number of server processes to start # MinSpareServers: minimum number of server processes which are kept spare # MaxSpareServers: maximum number of server processes which are kept spare # MaxClients: maximum number of server processes allowed to start # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_prefork_module> StartServers 5 MinSpareServers 5 MaxSpareServers 10 MaxClients 150 MaxRequestsPerChild 0 </IfModule> # worker MPM # StartServers: initial number of server processes to start # MinSpareThreads: minimum number of worker threads which are kept spare # MaxSpareThreads: maximum number of worker threads which are kept spare # ThreadLimit: ThreadsPerChild can be changed to this maximum value during a # graceful restart. ThreadLimit can only be changed by stopping # and starting Apache. # ThreadsPerChild: constant number of worker threads in each server process # MaxClients: maximum number of simultaneous client connections # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_worker_module> StartServers 2 MinSpareThreads 25 MaxSpareThreads 75 ThreadLimit 64 ThreadsPerChild 25 MaxClients 150 MaxRequestsPerChild 0 </IfModule> # event MPM # StartServers: initial number of server processes to start # MinSpareThreads: minimum number of worker threads which are kept spare # MaxSpareThreads: maximum number of worker threads which are kept spare # ThreadsPerChild: constant number of worker threads in each server process # MaxClients: maximum number of simultaneous client connections # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_event_module> StartServers 2 MinSpareThreads 25 MaxSpareThreads 75 ThreadLimit 64 ThreadsPerChild 25 MaxClients 150 MaxRequestsPerChild 0 </IfModule> # These need to be set in /etc/apache2/envvars User ${APACHE_RUN_USER} Group ${APACHE_RUN_GROUP} # # AccessFileName: The name of the file to look for in each directory # for additional configuration directives. See also the AllowOverride # directive. # AccessFileName .htaccess # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # <Files ~ "^\.ht"> Order allow,deny Deny from all Satisfy all </Files> DefaultType None HostnameLookups Off ErrorLog ${APACHE_LOG_DIR}/error.log LogLevel debug # Include module configuration: Include mods-enabled/*.load Include mods-enabled/*.conf # Include list of ports to listen on and which to use for name based vhosts Include ports.conf # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # If you are behind a reverse proxy, you might want to change %h into %{X-Forwarded-For}i # # LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %O" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent <Directory "/var/www"> Order allow,deny Allow from all Require all granted </Directory> # Include generic snippets of statements Include conf.d/ # Include the virtual host configurations: Include sites-enabled/*.conf NameVirtualHost *:80 /etc/apache2/sites-available/site1.net.conf <VirtualHost *:80> ServerName site1.net ServerAlias site1.net *.site1.net DocumentRoot "/var/www/site1" ErrorLog "/var/www/site1/logs/error.log" CustomLog "/var/www/site1/logs/access.log" vhost_combined <Directory "/var/www/site1"> Options None AllowOverride All Order allow,deny Allow from all Satisfy Any </Directory> </VirtualHost> /etc/apache2/sites-available/site2.com.conf <VirtualHost *:80> ServerName site2.com ServerAlias site2.com *.site2.com DocumentRoot "/var/www/site2" ErrorLog "/var/www/site2/logs/error.log" CustomLog "/var/www/site2/logs/access.log" vhost_combined <Directory "/var/www/site2"> Options None AllowOverride All Order allow,deny Allow from all Satisfy Any </Directory> </VirtualHost> I've also tried setting NameVirtualHost like: Listen 80 NameVirtualHost 23.88.121.82:80 NameVirtualHost 127.0.0.1:80 and the VirtualHost Directives: <VirtualHost 23.88.121.82:80> ... </VirtualHost> for both sites, but that causes the first site to fail, as well. I'm wondering if I need to set up individual IPs for each site, possibly? I have 2 more IPv4 and 3 IPv6 addresses available, if that would make a difference. Also, in the grand scheme of things, I will need to enable SSL for the first site. I've been reading that I'll need to basically just mimic the directives for listening on port 80, only on port 443, and make sure mod_ssl is enabled? EDIT: I just ran apache2 -t to test the config files that way, and got the error: apache2: bad user name ${APACHE_RUN_USER}. However, apachectl configtest returns Syntax OK. There are no other mentions of errors with the mutex anywhere else, however. I was pretty sure if there was an error with the user apache was supposed to run under, the server wouldn't start at all... EDIT 2: Restarting apache fixed the bad user name error.

  Read the article

• Does a USB hub affect performance?

  - by user1018733

  I have two devices I want maximum throughput and latency with. (Midi drums and midi keyboard for example) Would connecting both to the same USB port via a hub effectively limit the maximum data transfer rate to 1/2 to each of them? I am assuming yes, but I didn't know if USB hubs had a handshaking and priority giving protocol available (e.g. let the device with the longer built up buffer of data communicate first) Thanks

  Read the article

• VMware Fusion: transfer programs/config from one Windows to another...

  - by frankyleonard

  Both virtual machines on VMWare Fusion - with the first one, it is impossible to connect to the internet, so I installed another XP. What I want to do is to import all the programs in the new one. Someone can help me? Thanks a lot! Franky

  Read the article

• How Do i configure sip2sip, sipdroid, pbxes, and google voice on my andriod g1

  - by Bliss

  I've been trying to configure the above for two days i used ipkall at first and it registered with my sipdroid app because i got a green status light and whenever i make a call from sipdroid it will show it in the pbxes call log but the call drops asap..i downloaded sip2sip to get another number ive gotten the new number from sip2sip now i need to configure sip2sip with sipdroid and google voice...can someone please help me my e-mail is [email protected]

  Read the article

• Why is the VGA Cable attached to new monitors

  - by ahsteele

  When opening a new monitor I am amazed that the VGA cable is always attached. Even with new high end monitors that include Display Port and DVI cables the old VGA cable is always attached while the others are just left in the box. What is the reasoning behind attaching a cable in the first place and why the VGA cable in particular?

  Read the article

• Copying a large file from portable hard drive to another in Windows results nothing.

  - by Martti Laine

  Hello I'm trying to copy mu music-library (about 125gb) to another portable hard drive. However, When I try to do it, Windows' copy-alert just pops and then goes away. I've also tried to first copy them on C:\ without any progress. All of the drives are NTFS. Martti Laine

  Read the article

• Simple IPV6 Address Question

  - by Daniel

  Hello, I have a /96 block of IPV6 addresses and i'm wondering how i could some how find the next address (Since ipv6 addresses can contain numbers and letters). I know the first address could be in numbers but i've yet to find out how i could really find in some kind of order for that amount of addresses E.G: What technique could i use to make sure i'll actually be able to use all of the addresses

  Read the article

• No display on computer due to connection problem

  - by whamsicore

  My computer is booting but has no display. The optical drive has power, but the USB doesn't, so I figured that I had a broken motherboard. However I tried to boot my computer again laying flat, and it worked fine for two seconds, and then froze like it did the first time. It had no display after that. I have come to the conclusion that it is a connection problem (someone had a similar problem on one of the online forums).

  Read the article

• Run a script after I unlock my Windows session?

  - by TomWij

  How do I run a script each time I unlock my Windows 7 session? So, if I lock my session and then log in again, I want the script to run. Do login scripts configured in the Group Policy do this or will they only work the first time?

  Read the article

• working on ubuntu from windows

  - by doug

  hi there first , i have to say that i have no experience in working with ubuntu or any other unix like distributions. I have two computers and I wish to have the following setup and working scenario. In one computer i need to have ubuntu and to connect to it from a windows station using my lan. Can anyone recommend me a tutorial (link, video, anything)? TY

  Read the article

• Can I install a Windows 8 Pro upgrade in a virtual machine?

  - by Dean Schulze

  I bought a Lenovo 430K with Windows 7 Home Premium and upgraded it to Windows 8 Pro. I created a DVD from which I installed the Windows 8 Pro upgrade. I'm underwhelmed with Windows 8, however. I want to install Linux as the host OS and run Windows 8 Pro as a guest OS. Will the Windows 8 Pro DVD that I created install Windows 8 Pro in a virtual machine, or would that virtual machine have to have Windows 7 installed first in order to install the upgrade?

  Read the article

• On linux how can make a list of files that are owned by a particular owner and then fix the group and owner?

  - by Stuart Woodward

  I have a deep and complex file system where some files have been accidently written by root. I want to change the ownership of those files back to the original owner in one go. I am playing with commands like: find /folder -type f | xargs ls -l | grep "root root" but there is a lot of garbage coming out too. I want to make a list first and then change only the files in that list after confirmation.

  Read the article

• CoreData: Same predicate (IN) returns different fetched results after a Save operation

  - by Jason Lee

  I have code below: NSArray *existedTasks = [[TaskBizDB sharedInstance] fetchTasksWatchedByMeOfProject:projectId]; [context save:&error]; existedTasks = [[TaskBizDB sharedInstance] fetchTasksWatchedByMeOfProject:projectId]; NSArray *allTasks = [[TaskBizDB sharedInstance] fetchTasksOfProject:projectId]; First line returns two objects; Second line save the context; Third line returns just one object, which is contained in the 'two objects' above; And the last line returns 6 objects, containing the 'two objects' returned at the first line. The fetch interface works like below: WXModel *model = [WXModel modelWithEntity:NSStringFromClass([WQPKTeamTask class])]; NSPredicate *predicate = [NSPredicate predicateWithFormat:@"(%@ IN personWatchers) AND (projectId == %d)", currentLoginUser, projectId]; [model setPredicate:predicate]; NSArray *fetchedTasks = [model fetch]; if (fetchedTasks.count == 0) return nil; return fetchedTasks; What confused me is that, with the same fetch request, why return different results just after a save? Here comes more detail: The 'two objects' returned at the first line are: <WQPKTeamTask: 0x1b92fcc0> (entity: WQPKTeamTask; id: 0x1b9300f0 <x-coredata://CFFD3F8B-E613-4DE8-85AA-4D6DD08E88C5/WQPKTeamTask/p9> ; data: { projectId = 372004; taskId = 338001; personWatchers = ( "0xf0bf440 <x-coredata://CFFD3F8B-E613-4DE8-85AA-4D6DD08E88C5/WWPerson/p1>" ); } <WQPKTeamTask: 0xf3f6130> (entity: WQPKTeamTask; id: 0xf3cb8d0 <x-coredata://CFFD3F8B-E613-4DE8-85AA-4D6DD08E88C5/WQPKTeamTask/p11> ; data: { projectId = 372004; taskId = 340006; personWatchers = ( "0xf0bf440 <x-coredata://CFFD3F8B-E613-4DE8-85AA-4D6DD08E88C5/WWPerson/p1>" ); } And the only one object returned at third line is: <WQPKTeamTask: 0x1b92fcc0> (entity: WQPKTeamTask; id: 0x1b9300f0 <x-coredata://CFFD3F8B-E613-4DE8-85AA-4D6DD08E88C5/WQPKTeamTask/p9> ; data: { projectId = 372004; taskId = 338001; personWatchers = ( "0xf0bf440 <x-coredata://CFFD3F8B-E613-4DE8-85AA-4D6DD08E88C5/WWPerson/p1>" ); } Printing description of allTasks: <_PFArray 0xf30b9a0>( <WQPKTeamTask: 0xf3ab9d0> (entity: WQPKTeamTask; id: 0xf3cda40 <x-coredata://CFFD3F8B-E613-4DE8-85AA-4D6DD08E88C5/WQPKTeamTask/p6> ; data: <fault>), <WQPKTeamTask: 0xf315720> (entity: WQPKTeamTask; id: 0xf3c23a0 <x-coredata://CFFD3F8B-E613-4DE8-85AA-4D6DD08E88C5/WQPKTeamTask/p7> ; data: <fault>), <WQPKTeamTask: 0xf3a1ed0> (entity: WQPKTeamTask; id: 0xf3cda30 <x-coredata://CFFD3F8B-E613-4DE8-85AA-4D6DD08E88C5/WQPKTeamTask/p8> ; data: <fault>), <WQPKTeamTask: 0x1b92fcc0> (entity: WQPKTeamTask; id: 0x1b9300f0 <x-coredata://CFFD3F8B-E613-4DE8-85AA-4D6DD08E88C5/WQPKTeamTask/p9> ; data: { projectId = 372004; taskId = 338001; personWatchers = ( "0xf0bf440 <x-coredata://CFFD3F8B-E613-4DE8-85AA-4D6DD08E88C5/WWPerson/p1>" ); }), <WQPKTeamTask: 0xf325e50> (entity: WQPKTeamTask; id: 0xf343820 <x-coredata://CFFD3F8B-E613-4DE8-85AA-4D6DD08E88C5/WQPKTeamTask/p10> ; data: <fault>), <WQPKTeamTask: 0xf3f6130> (entity: WQPKTeamTask; id: 0xf3cb8d0 <x-coredata://CFFD3F8B-E613-4DE8-85AA-4D6DD08E88C5/WQPKTeamTask/p11> ; data: { projectId = 372004; taskId = 340006; personWatchers = ( "0xf0bf440 <x-coredata://CFFD3F8B-E613-4DE8-85AA-4D6DD08E88C5/WWPerson/p1>" ); }) ) UPDATE 1 If I call the same interface fetchTasksWatchedByMeOfProject: in: #pragma mark - NSFetchedResultsController Delegate - (void)controllerDidChangeContent:(NSFetchedResultsController *)controller { I will get 'two objects' as well. UPDATE 2 I've tried: NSPredicate *predicate = [NSPredicate predicateWithFormat:@"(ANY personWatchers == %@) AND (projectId == %d)", currentLoginUser, projectId]; NSPredicate *predicate = [NSPredicate predicateWithFormat:@"(ANY personWatchers.personId == %@) AND (projectId == %d)", currentLoginUserId, projectId]; Still the same result. UPDATE 3 I've checked the save:&error, error is nil.

  Read the article

• How do I completely uninstall MySQL?

  - by snakile

  I have installed and uninstalled MySQL Server for about 100 times. Each time I reinstall the thing, it shows the same configurations, which I think cause problems. I would like to get rid of all traces of MySQL and install it as if it was the first installation. I'v already deleted the MySQL folder, but I still having the same problem. How can I start over and reinstall MySQL? EDIT: My OS is Windows 7.

  Read the article

• Assign a secondary IP address to a Windows machine using DHCP

  - by IndigoFire

  Is it possible to configure dhcpd (on a Linux box) to assign a Windows PC 2 separate IP configurations? Right now I've configured the two IP addresses manually and it does exactly what's needed, but I can't figure out how to achieve the same thing with DHCP. For example, is it possible to set up a virtual interface that piggy-backs onto the first interface and gets its own configuration? Alternatively, is it possible to run a script upon getting IP values from DHCP that would then be able to configure the secondary IP?

  Read the article

• multi-screen switcher

  - by João Melo

  I have a windows 7 machine with vmware and 2 monitors. The first one, with vmware on fullscreen, and the second one as the main screen with windows 7 with the browser and some applications, is there any way to toggle the screens configuration with a hotkey so it switches the main screen to the left and all applications accordingly (Vmware on full screen on the right monitor, and all applications on the left)

  Read the article

• Why did Intel drop the Itanium?

  - by Cole Johnson

  I was reading up on the history of the computer and I came along the IA-64 (Itanium) processors. They sounded really interesting and I was confused as to why Intel would decide to drop them. The ability to choose explicitly what 2 instructions you wanted to run in that cycle is a great idea, especially when writing your program in assembly, for example, a faster bootloader. The hundreds of registers should be convincing for any assembly programmer. You could essentially store all the functions variables in the registers if it doesn't call any other ones. The ability to do instructions like this: (qp) xor r1 = r2, r3 ; r1 = r2 XOR r3 (qp) xor r1 = (imm8), r3 ; r1 = (imm8) XOR r3 versus having to do: ; eax = r1 ; ebx = r2 ; ecx = r3 mov eax, ebx ; first put r2 into r1 xor eax, ecx ; then set r1 equivalent to r2 XOR r3 or ; SAME mov eax, (imm32) ; first put (imm32) into r1 xor eax, ecx ; then set r1 equivalent to (imm32) XOR r3 I heard it was because of no backwards x86 comparability, but couldn't thy be fixed by just adding the Pentium circuitry to it and just add a processor flag that would switch it to Itanium mode (like switching to Protected or Long mode) All the great things about it would have surly put them a giant leap ahead of AMD. Any ideas? Sadly this means you will need a very advanced compiler to do this. Or even one per specific model of the CPU. (E.g. a newer version of the Itanium with an extra feature would require different compiler). When I was working on a WinForms (target only had .NET 2.0) project in Visual Studio 2010, I had a compile target of IA-64. That means that there is a .NET runtime that was able to be compiled for IA-64 and a .NET runtime means Windows. Plus, Hamilton's answer mentions Windows NT. Having a full blown OS like Windows NT means that there is a compiler capable of generating IA-64 machine code.

  Read the article

• How can I fix Problems with interlaced video jerking/flicking when playedback on DVD players? (Mixin

  - by Simon P Stevens

  I'm trying to make a DVD and the final DVD jerks when played on standalone DVD players. It seems to play fine on PCs. I think the problem may be to do with interlacing settings when rendering the final output, but I'll outline the whole editing process I have followed in case I've made a mistake somewhere else. Most of the footage comes from a sony handy cam (one of those mini DVD ones) so isn't great quality. It was set to "high quality" (haha) and 16:9 aspect ratio when it was recorded. I copy the files directly from the mini DVDs onto the hard drive and import them into Cinelerra. In Cinelerra I set the format to 25fps, 720x576, RGBA-8bit, 16:9, interlaced bottom fields first. When I've finished the editing, I add a Fields to frames effect (set to bottom first) to each video track. I render to audio and video separately: Audio: AC3, 128kbps Video: YUV4MPEG steam, video pipe settings: ffmpeg -f yuv4mpegpipe -i - -y -target dvd -flags +ilme+ildct mpeg2video % Cinelerra often crashes during the rendering, so I set it to generate a new video file at each label, and combine them using cat when I've got a sucesful render of each one. Once I've combined them, I use mencoder to re-index them: mencoder -forceidx -oac copy -ovc copy merged.m2v -o mergedReIndexed.m2v I combine the audio and video files using ffmpeg: ffmpeg -i AudioFile.ac3 -i VideoFile.m2v -target dvd -flags +ilme+ildct FinalMovie.mpg Then I build the menus with spumux and I create the DVD file system with dvdauthor, and finally I write it do a dvd-r like this: nice -n -20 growisofs -dvd-compat -speed=2 -Z /dev/dvd -dvd-video -V VIDEO ./ && eject /dev/dvd Originally, when I did it the DVD flickered badly, so as suggested in a guide I added the fields to frames effect in cinelerra. Now it doesn't "flicker", but has become "jerky" when there is lots of motion, particularly when the camera is moving, so the whole background moves. This is what I've tried so far: Removed "mpeg2video" from cinelerra video render pipe. Removed +ilme from render pipe. Removed +ildct from render pipe. Removed +ilme from render audio/video rejoin command. Removed +ildct from render audio/video rejoin command. Added -alt to render pipe. Added -alt to render audio/video rejoin command. Tried with and without the frames to fields effect in Cinelerra. and various combinations of the above. I've also tried this: change the Cinelerra fps to 50, use fields to frames (instead of frames to fields), render to an intermediate QTforlinux jpeg video stream, re-importing that back into Cinelerra, adding a frames to fields effect and then rendering that output as normal (@25fps), and I still have the same problem. Has anyone experienced this "jerking" playback before? Can anyone give any suggestions on how to fix it? (Like I say, it plays back fine on a PC, but not on any of the standalone players I've tried)

  Read the article

• How do you google bad reviews? [closed]

  - by zlog

  The first thing I like to do before I make technology choices or gadget purchases is find bad reviews of the things. That way, taking into consideration of the potential biases of the reviewer, I can evaluate the product/service for the worse it can be. How do people google (or search in general) for bad reviews? I usually just try googling "bad review [product/service]" or "[product/service] sucks", but I'm sure there are better ways.

  Read the article

• LdapErr: DSID-0C0903AA, data 52e: authenticating against AD '08 with pam_ldap

  - by Stefan M

  I have full admin access to the AD '08 server I'm trying to authenticate towards. The error code means invalid credentials, but I wish this was as simple as me typing in the wrong password. First of all, I have a working Apache mod_ldap configuration against the same domain. AuthType basic AuthName "MYDOMAIN" AuthBasicProvider ldap AuthLDAPUrl "ldap://10.220.100.10/OU=Companies,MYCOMPANY,DC=southit,DC=inet?sAMAccountName?sub?(objectClass=user)" AuthLDAPBindDN svc_webaccess_auth AuthLDAPBindPassword mySvcWebAccessPassword Require ldap-group CN=Service_WebAccess,OU=Groups,OU=MYCOMPANY,DC=southit,DC=inet I'm showing this because it works without the use of any Kerberos, as so many other guides out there recommend for system authentication to AD. Now I want to translate this into pam_ldap.conf for use with OpenSSH. The /etc/pam.d/common-auth part is simple. auth sufficient pam_ldap.so debug This line is processed before any other. I believe the real issue is configuring pam_ldap.conf. host 10.220.100.10 base OU=Companies,MYCOMPANY,DC=southit,DC=inet ldap_version 3 binddn svc_webaccess_auth bindpw mySvcWebAccessPassword scope sub timelimit 30 pam_filter objectclass=User nss_map_attribute uid sAMAccountName pam_login_attribute sAMAccountName pam_password ad Now I've been monitoring ldap traffic on the AD host using wireshark. I've captured a successful session from Apache's mod_ldap and compared it to a failed session from pam_ldap. The first bindrequest is a success using the svc_webaccess_auth account, the searchrequest is a success and returns a result of 1. The last bindrequest using my user is a failure and returns the above error code. Everything looks identical except for this one line in the filter for the searchrequest, here showing mod_ldap. Filter: (&(objectClass=user)(sAMAccountName=ivasta)) The second one is pam_ldap. Filter: (&(&(objectclass=User)(objectclass=User))(sAMAccountName=ivasta)) My user is named ivasta. However, the searchrequest does not return failure, it does return 1 result. I've also tried this with ldapsearch on the cli. It's the bindrequest that follows the searchrequest that fails with the above error code 52e. Here is the failure message of the final bindrequest. resultcode: invalidcredentials (49) 80090308: LdapErr: DSID-0C0903AA, comment: AcceptSecurityContext error, data 52e, v1772 This should mean invalid password but I've tried with other users and with very simple passwords. Does anyone recognize this from their own struggles with pam_ldap and AD? Edit: Worth noting is that I've also tried pam_password crypt, and pam_filter sAMAccountName=User because this worked when using ldapsearch. ldapsearch -LLL -h 10.220.100.10 -x -b "ou=Users,ou=mycompany,dc=southit,dc=inet" -v -s sub -D svc_webaccess_auth -W '(sAMAccountName=ivasta)' This works using the svc_webaccess_auth account password. This account has scan access to that OU for use with apache's mod_ldap.

  Read the article

• Innotop and Monit to kill thread using too much resources

  - by pocesar

  Instead of restarting the whole MYSQL process, sometimes I just want to kill the offending thread instead of making everything go down. Usually the spike in CPU is when a bot is crawling the first pages of pagination of my site (over 70.000 paginated results, 45 items per page). Is there a way I could do this automatically using monit and innotop? I couldn't find relevant information on Google, that's why I'm asking here. If these two tools aren't par to the task, which ones should I use?

  Read the article

• V MAX Anyone..Need to learn administrating VMAX

  - by kevinmika

  Hello All, This is going to be my first post here. I 'm working as an Administrator at SNI. I have been responsible for managing Celerra and Clariion,but this new environment has 2 VMAX boxes . Since, I don't have prior experience is managing symmetrix ,i am kinda stuck here ( no training as well) Can some body suggest me a proper link where i can learn the basics as well as the administrative part of V MAX. Thanks in advance for your help! Kevin

  Read the article

• How to copy directory from one Linux server to another with a minimum in-between period?

  - by yegor256

  I have a rather big directory on one server (over 4000 files), which I'd like to copy to another server (which contains a previous version of this directory). rsync is the first option, but it will put the destination folder into waiting status for a rather long period of time (more than a minute). I'd like to do it a bit differently: gzip the source folder scp the archive to the destination server gunzip the file there delete the archive at the source and the destination What is the best way to accomplish all this?

  Read the article

< Previous Page | 464 465 466 467 468 469 470 471 472 473 474 475  | Next Page >