Search Results

Search found 14598 results on 584 pages for 'address'.

Page 469/584 | < Previous Page | 465 466 467 468 469 470 471 472 473 474 475 476  | Next Page >

• Can't ping my Window 7 machine from within a Windows XP virtual machine

  - by Jonathan Conway

  I have Windows 7 installed as my primary operating system, on a laptop that's on my home network (wireless). I'm using Microsoft Virtual PC 2007 SP1 to run a virtual machine of Windows XP SP3, in which I want to access the Windows 7 instance, both to browse a shared folder and access the local Apache server. So far I can ping my Windows 7 IP address (IPv4) and access the apache server through the web browser through HTTP. However using my machine name never seems to work. Pinging it fails, and I can't access my apache server using it either. The problem seems to be something to do with my machine's name being registered under IPv6 rather than IPv4. I'm at a loss what to do. Should I try to set up IPv6 on the virtual machine? Not sure how to go about that. Or maybe I should somehow get my machine name on Windows 7 to work with IPv4? Although I think it already does, because I can ping it from a separate box (running Ubuntu), which is only registered under IPv6.

  Read the article

• I need an admin toolset for Windows 2003 and 2008

  - by eugeneK

  i know this is way too general question but anyway. I need few tools, will write down my tasks as sysadmin and if you have any to automate my job i would be glad to hear. I don't mind paying for software needed unless it is way too expensive. First of i backup all files on server at local/office storage. I 7zip all SQL backup files and then move them over network to centralized location and then FTP them from office PC which has no FTP server installed and cannot have one. Backups happen at 4AM at the morning thus i need to set time for compressing and afterward FTPing. Then i FTP all IIS web application as differentiation backup, same goes for VOD movies. Second tool i need is system monitor which will monitor all servers from themselves and from external location for CPU/Memory/Hard disk and other basic failures. This tool should able to execute Website address with parameters which will send me an email with all report on failure. Third tool i need is a way to get all Event Logs from 10 Windows based servers without accessing each any of them manually. If you know any solution, thanks in advance.

  Read the article

• Sync clock on Windows XP machine to external (non-domain, non-workgroup) Windows Server 2008 R2 machine

  - by Eric

  I have two machines and I'd like their clocks to be in sync for various reasons. Machine 1 is an XP machine located in the office. Machine 2 is a VPS hosted by a third party running Windows Server 2008 R2. These machines are not in any kind of workgroup or on a domain together. They are completely separate machines. Machine 2 is currently syncing once a week to time.windows.com. The clock on Machine 2 does seem to wander a bit within that week interval. What I would like to do is have Machine 1 set its clock based on the clock of Machine 2. I have tried configuring w32tm on the XP machine. This is what I used for configuration: w32tm /config /syncfromflags:manual /manualpeerlist:"<ip address of machine 2>" However, whenever I issue the /resync command I get "The computer did not resync because no time data was available". I have made sure to start the windows time service on machine 2, and I have added firewall exceptions for UDP port 123. Is there something I need to configure on Machine 2 (other than just starting the time service) in order to get it to respond? Edit: I have also run w32tm /config /reliable:YES /update on Machine 2. I am still getting "The computer did not resync because no time data was available". Is there something else I'm missing?

  Read the article

• adding or routing additional domain email addresses

  - by Mustafa Ismail Mustafa

  We have exchange 2007 and we bought a new domain name and we're still keeping the old one so that we can wean everyone off of the old emails. Now, I'm wondering how to go about this. I need to add the new domain as accepted and authoritative by the exchange server. Emails on the new domain need to get routed to the inbox and ditto the old emails, however, I want to be able to change the reply-to in the header to the new email address automatically. I also want to set the new email addresses as the defaults. Ideally, I'd like to be able to add a message at the bottom of every externally outgoing email saying that the new email is [email protected]. But this is a nice to have, certainly not a must have. I've added the new domain as authoritative, and managed to change the primary smtp email addresses to the new one, but sent emails are not being routed to them and neither are the old email addresses! Now how the heck would I go about fixing all of that? I'm completely stumped! TIA

  Read the article

• Trying to use a SmartHost with my Exchange 2010 server

  - by Pure.Krome

  Hi folks, I'm trying to use a SmartHost with my Exchange 2010 Server. SmartHost details: Secure SMTPS: securemail.internode.on.net 465 <-- Note: that's port 465 Configure your existing SMTP settings (in your email program) to: use authentication (enter your Internode username and password, enter your username as [email protected]). enable SSL for sending email (SMTPS). So I've added the smart host details to my Org Config -> Hub Transport. I then used PowerShell to add the port:- Set-SendConnector "securemail.internode.on.net" -port 465 I've then added my username/password (as suggested above) to the SmartHost as Basic Authentication (with no TLS). Then I try sending an email and I get the following error message :- 451 4.4.0 Primary target IP address responded with: "421 4.4.2 Connection dropped due to ConnectionReset." So i'm not sure how to continue. I also tried ticking the TLS box but stll I get the same error. If i don't use SMTPS (secure SMTP, on port 465) and use basic SMTP on port 25 with no Authentication, email gets sent. Any ideas? EDIT: Btw, I can telnet to that server on port 465 from my mail server .. just to make sure i'm not getting firewall'd, etc.

  Read the article

• Debian network bridge configuration - /etc/network/interfaces

  - by Mathias

  I'm running a Lenny Xen dom0 hosting multiple virtual machines in a routed IP setup. To get an additional private subnet, I created the bridge xenbr0 in the dom0 with the following commands: brctl addbr xenbr0 ifconfig xenbr0 10.0.0.1 netmask 255.255.255.0 ifconfig xenbr0 up This works as expected, and domU interfaces are added to the bridge by Xen on VM start. My only problem is: how the heck do i specify this configuration in /etc/network/interfaces that it remains permanent and the bridge is available after a reboot? I tried the following config as found on a lot of tutorials: auto xenbr0 iface xenbr0 inet static address 10.0.0.1 netmask 255.255.255.0 network 10.0.0.0 broadcast 10.0.0.255 bridge_stp no I get 2 different errors, depending on if the bridge already exists or not. If it doesn't exist: root@dom0:~# brctl show bridge name bridge id STP enabled interfaces root@dom0:~# /etc/init.d/networking restart Reconfiguring network interfaces...if-up.d/mountnfs[eth0]: waiting for interface xenbr0 before doing NFS mounts (warning). SIOCSIFADDR: No such device xenbr0: ERROR while getting interface flags: No such device SIOCSIFNETMASK: No such device SIOCSIFBRDADDR: No such device xenbr0: ERROR while getting interface flags: No such device xenbr0: ERROR while getting interface flags: No such device Failed to bring up xenbr0. done. And if it exists: root@dom0:~# brctl show bridge name bridge id STP enabled interfaces xenbr0 8000.000000000000 no root@dom0:~# /etc/init.d/networking restart Reconfiguring network interfaces...if-up.d/mountnfs[eth0]: waiting for interface xenbr0 before doing NFS mounts (warning). RTNETLINK answers: File exists Failed to bring up xenbr0. done. Could anyone point me in the right direction please? The bridge works fine when created manually, i just need the right config file entries. The most tutorials I found add some devices to the bridge in the config, is that maybe the problem why it is not working? I don't have any interfaces I want to add to the bridge on creation as they get added later on VM start... Thanks, Mathias

  Read the article

• Email bouncing sent from Google

  - by davidmck

  I'm hoping someone here has an idea of where to look next. We have a domain we support which has email sent to it from one particular user bounce with the following message: Delivery to the following recipient failed permanently: [email protected] Technical details of permanent failure: Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 550 550 Unrouteable address (state 14). We only have reports of bouncing form this one particular user (who is someone we don't support - except they'd like to be able to contact our customer and we're trying to figure out if the problem is on our end). Many people can successfully send to this domain and the user who is getting bounce messages can send to other domains that we support (so it's clearly something specific with the princetonscoop.com domain and not our setup in general). I've reviewed the MX records multiple times and the server logs don't show a connection which generates this error (in fact this error is not one that our mail server would ever return). So it appears that google is contacting a different mail server for some reason. I have tested sending from my gmail account and that works. I believe the sender is using a google-apps account (the account they are using is from their own domain, not a gmail account). Any ideas on what might be happening here or what to test/investigate next? Thanks.

  Read the article

• I am under DDoS. What can I do?

  - by Falcon Momot

  This is a Canonical Question about DoS and DDoS mitigation. I found a massive traffic spike on a website that I host today; I am getting thousands of connections a second and I see I'm using all 100Mbps of my available bandwidth. Nobody can access my site because all the requests time out, and I can't even log into the server because SSH times out too! This has happened a couple times before, and each time it's lasted a couple hours and gone away on its own. Occasionally, my website has another distinct but related problem: my server's load average (which is usually around .25) rockets up to 20 or more and nobody can access my site just the same as the other case. It also goes away after a few hours. Restarting my server doesn't help; what can I do to make my site accessible again, and what is happening? Relatedly, I found once that for a day or two, every time I started my service, it got a connection from a particular IP address and then crashed. As soon as I started it up again, this happened again and it crashed again. How is that similar, and what can I do about it?

  Read the article

• How do I get "Back to My Mac" (using MobileMe) from Windows?

  - by benzado

  I have a MobileMe subscription and a Mac at home with "Back to My Mac" enabled. When I'm away from home, this service lets me use another Mac to connect to my Mac back home and access file sharing, screen sharing, etc. As far as I know, the service doesn't use any proprietary protocols, so in theory I should also be able to get "Back to My Mac" from a Windows PC. This MacWorld article explains how it works. Basically, it uses Wide-Area Bonjour to give your Mac a domain name like hostname.username.members.mac.com. Remote computers can find your Mac using that address, then connect to it using a private VPN. The "Wide Area Bonjour" part seems to make it a little more complicated than simply a regular domain name, though. Note that I'm not interested in using the methods described by LifeHacker, which doesn't use the MobileMe service at all. I don't want to use a totally different dynamic DNS service. I'd like to use the one I'm already paying for, or at least find out why that's not possible from Windows. Also, my primary problem is finding a network route back to my mac... once I've got that I know how to enable services so that Windows can talk to it. UPDATE: Based on some additional research, it appears that Apple is only assigning IPv6 addresses to the hostname.username.members.mac.com names. So any solution will require enabling IPv6 support on Windows, if possible.

  Read the article

• Adobe Reader Wants Sensitive Email Details

  - by KDM

  When I run Adobe Reader, it tells me: Either there is no default mail client or the current mail client cannot fulfill the messaging request. Please run Microsoft Outlook and set it as the default mail client. I have a couple of issues with this: 1) It presupposes everyone has Microsoft Office installed. Not all home users have the budget or inclination for this. 2) It presupposes everyone wants Microsoft Outlook to be their default mail client. 3) I have Microsoft Office (incl. Outlook) installed and set as my default mail client. Even if I make it the default mail client from within the Adobe Reader Preferences, that doesn't stop the dialog appearing. 4) I thought I'd give Adobe Reader a new email address in the preferences, just to get it to stop bugging me. I notice, though, that it want's the SMTP and POP addresses and the account password? They have got to be kidding? I just want to view PDF files. How do I get the message to go away without telling Adobe my life story, giving them my mother's maiden name, my favourite movie, my place of birth, the name of my first goldfish and emptying the contents of my wallet for them?

  Read the article

• SORT empties my file?

  - by Jonathan Sampson

  I'm attempting to sort a csv on my machine, but I seem to be erasing the contents each time I use the sort command. I've basically created a copy of my csv lacking the first row: sed '1d' original.csv > newcopy.csv To confirm that my new copy exists lacking the first row I can check with head: head 1 newcopy.csv Sure enough, it finds my file and shows me the original second now (now first row). My csv consists of numerous values seperated by commas: Jonathan Sampson,,,,[email protected],,,GA,United States,, Jane Doe,Mrs,,,[email protected],,,FL,United States,32501, As indicated above, some fields are empty. I want to sort based upon the email address field, which is either 4, or 5 - depending on whether the sort command uses a zero-based index. So I'm trying the following: sort -t, +4 -5 newcopy.csv > newcopy.csv So I'm using -t, to indicate that my fields are terminated by the comma, rather than a space. I'm not sure if +4 -5 actually sorts on the email field or not - I could use some help here. And then newcopy.csv > newcopy.csv to overwrite the original file with new sort results. After I do this, if I try to read in the first line: head 1 newcopy.csv I get the following error: head: cannot open `1' for reading: No such file or directory == newcopy.csv <== Sure enough, if I check my directory the file is now empty, and 0 bytes.

  Read the article

• How to configure VirtualBox server for performance at home

  - by BluJai

  I currently have two physical Ubuntu Server 10.10 servers at home: one serves as our firewall/router/DHCP/VPN server and the other performs double-duty as a file server and a VirtualBox host for an Ubuntu Desktop 10.10 machine which I use from remote connections (via NoMachine) for many thin-client purposes which are irrelevant to my question. What I'd like to accomplish is to consolidate the two physical machines into one which is a dedicated VirtualBox host (most likely running Ubuntu Server 10.10). Note that I'd like to stick with VirtualBox (if possible) because I'm most comfortable with it and use it on a daily basis at both home and work. Specifically, I plan to have one VM set up as file server, another as the firewall/router/DHCP/VPN (or possibly split those a bit) and a third, which is the only current VM (already VirtualBox), which is the thin-client host. My question comes down to performance and/or recommendations about the file server VM. The file server hosts about 6 terabytes of data across 4 drives. What I'd like to do is use raw disk access from the VM directly to the existing disks. However, I'm curious what performance advantage/disadvantage that would have as compared to using shared folders from the VM host and basically just have the whole drive served as a shared folder to the VM which would then serve it to the other machines on the network. I don't know if virtual disks would even work in this scenario and I certainly wouldn't want a drive to be filled with just a single file which is 1.5 TB (disk image). To add understanding of context, but not to get additional advice, I want to virtualize these machines because I intend to regularly use the snapshot capabilities of VirtualBox for the system disks (which will be virtual drives) of the VMs and I have some physical space/power needs to address (as I mentioned, this is at home).

  Read the article

• How to get my W2003-server (back) into the web (after setting up bridged networking)

  - by MBaas

  I have recently set up Virtualbox on a W2003-Server (which is also used as webserver, accessed from the web). My vbox worked nicely, but then I wanted more, I wanted to have the vm appear in the intranet like any ordinary pc. I was advised to setup bridged networking as opposed to NAT. I did so, and in the server's network connections have bridged the LAN-Connection and the "VirtualBox Host-Only Network" (yes, it says "host only network", but I assure that VBox networking is configured to use network bridge). So now my VM is visible in the intranet and it also has www-accesss, the server can also access the web. The only problem that came up is that the server is no longer accessible from the web. I've traced an HTTP-Request and it says "Can't connect to *:80 (connect: No route to host)". So maybe something in the router's config needs to be adjusted (yeah, well, the server's IP-Address changed from 192.168.1.199 to ...198). So I went into the router-config, reviewed port-forwarding for port 80 and adjusted the IP there, but it still didn't work. Unsure if it was a router-problem or rather something in the server's config, I've setup a "demilitarized zone" in the router and have put the server into it. (My understanding is that this would put the server straight into the web...) But the result of the HTTP-Requests is still the same :(

  Read the article

• Setup Entourage for Exchange via HTTP communication

  - by Johandk

  Our ISP set up a hosted exchange server for all our mail. I've setup all our Outlook users with no problems. We have two people using Mac OSX Leopard and Entourage. Entourage has the option of adding an Exchange account, but I have no idea how to tell it to connect to exchange via HTTP. Heres an excerpt from the client setup docs the hosting company sent me for Outlook: 1 .Go to control panel 2. Select ‘Mail’ 3. Select ‘Email accounts’ Under the E-mail tab select ‘New’ Select ‘Manually configure server settings......’ - click next Select ‘Microsoft Exchange’ – click next Complete details as below with Microsoft Exchange Server as: [server address] Do not select ‘Check Name’. Instead select ‘More Settings’. Go to the Connection tab, and select the bottom option ‘Connect to Microsoft Exchange using HTTP’. And then select the ‘Exchange Proxy Settings’ button. Enter Proxy server for Exchange Check Only connect to proxy servers that have this principal name in their certificate, Enter msstd:[servername] Proxy Authentication - select Basic Authentication Select OK, and again, so that you return to the main screen. Now select ‘Check Name’. Enter Username and Password: The username should now be the full name and underlined. If so select next, and then finish. Next time you open Outlook, enter username and password Any help GREATLY appreciated.

  Read the article

• location of index.html CentOS 6

  - by user2118559

  Based on this http://www.servermom.com/how-to-add-new-site-into-your-apache-based-centos-server/454/ tutorial installed Apache-based CentOS Server I use putty.exe as editor vi /etc/httpd/conf/httpd.conf at very bottom modified to <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /var/www/fikitipis.com/public_html ServerName www.fikitipis.com ServerAlias fikitipis.com ErrorLog /var/www/fikitipis.com/error.log CustomLog /var/www/fikitipis.com/requests.log common </VirtualHost> So expect that index is at /var/www/fikitipis.com/public_html When in browser type ip address of server, see Apache 2 Test Page powered by CentOS and so on You may now add content to the directory /var/www/html/ Then [root@vps ~]# ls /var/www/ see cgi-bin domain.com error fikitipis.com html icons Checking content of directories ls /var/www/domain.com/public_html, ls /var/www/fikitipis.com/public_html, /var/www/html/ are empty Where is index.html? Did touch /var/www/fikitipis.com/public_html/index1.html then vi /var/www/fikitipis.com/public_html/index1.html, typed a, then wrote some text in file, then Escape and shift+zz. And in browser http://111.111.11.111/index1.html and see what I had wrote. So until now seems that all works

  Read the article

• Understanding mail failure notices, 554

  - by goran

  I'd like to confirm the meaining of a mail failure notice. Here's the message Hi. This is the qmail-send program at mydomain.com I'm afraid I wasn't able to deliver your message to the following addresses. This is a permanent error; I've given up. Sorry it didn't work out. <[email protected]>: 1.2.3.4 does not like recipient. Remote host said: 554 <[email protected]>: Relay access denied Giving up on 1.2.3.4 The way I understand this is, that 1.2.3.4 is not setup to receive mail for this domain. dig domain.com MX shows ;; ANSWER SECTION: domain.com. 6245 IN MX 10 mail.domain.com. domain.com. 6245 IN MX 20 mx.anotherdomain.com. (1.2.3.4 is mx.anotherdomain.com.). The puzzling part is that I have reports that messages sent from gmail get delivered to this address. P.S. Is this a proper question for serverfault?

  Read the article

• SharePoint Business Connectivity Services (BCS) Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'

  - by g18c

  I am running SharePoint 2010 with SQL 2012, I am trying to get Business Connectivity Services (BCS) running but I am facing a double-hope authentication issue. Everytime I try to connect to the external BCS list created in SharePoint designer, I get the error Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. In the event viewer on the SQL server I see a login failure for an anonymous user from the SP server IP address. Background information below: I have enabled Kerberos under SharePoint Central admin. I have the following AD domain accounts: SP_Farm - main website pool SP_Services - for SharePoint services (including BCS) SQL_Engine - SQL database engine I then created the following with SetSPN: SetSPN -S http/intranet mydomain\SP_Farm SetSPN -S http/intranet.mydomain.local mydomain\SP_Farm SetSPN -S SPSvc/SPS mydomain\SP_Farm SetSPN -S MSSQLSvc/SQL1 mydomain\SQL_DatabaseEngine SetSPN -S MSSQLSvc/SQL1.mydomain.local mydomain\SQL_DatabaseEngine SetSPN -S MSSQLSvc/SQL1:1433 mydomain\SQL_DatabaseEngine SetSPN -S MSSQLSvc/SQL1.mydomain.local:1433 mydomain\SQL_DatabaseEngine I then delegated the AD accounts for any authentication protocol to the following: SP_Farm - SP_Farm (http service type, intranet) SP_Farm - SQL_DatabaseEngine (MSSQLSvc, sql1) SP_Service - SP_Service (SPSvc) SP_Service - SQL_DatabaseEngine (MSSQLSvc, sql1) I have also checked the WFE is being logged on to with Kerberos, with the WFE server event log showing event ID 4624 with Kerberos authentication, this is OK. The SQL is also showing connections authenticated as Kerberos from the WFE with the following query: Select s.session_id, s.login_name, s.host_name, c.auth_scheme from sys.dm_exec_connections c inner join sys.dm_exec_sessions s on c.session_id = s.session_id Despite the above, credentials are not passed from the client through the SharePoint server to the SQL server, only the anonymous account is used. I get the following error in the WFE server for 'BusinessData' ID 8080: Could not open connection using 'data source=sql1.mydomain.local;initial catalog=MSCRM;integrated security=SSPI;pooling=true;persist security info=false' in App Domain '/LM/W3SVC/1848937658/ROOT-1-129922939694071446'. The full exception text is: Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. If I set a username and password with the Secure Store Service and set the external list to use the impersonated credentials, the list works. Any ideas what I have missed and what can be tried next?

  Read the article

• Windows errors, how do I find root cause and fix it? Getting several errors

  - by Eric Martin

  My server is having issues and not responding to customer's https requests. I checked the event viewer and found several errors. These two are listed a couple of times: WINS encountered a database error. This may or may not be a serious error. WINS will try to recover from it. You can check the database error events under 'Application Log' category of the Event Viewer for the Exchange Component, ESENT, source to find out more details about database errors. If you continue to see a large number of these errors consistently over time (a span of few hours), you may want to restore the WINS database from a backup. The error number is in the second DWORD of the data section. And this one: An error occured while using SSL configuration for socket address 0.0.0.0:444. The error status code is contained within the returned data. SQL Server is not ready to accept new client connections. Wait a few minutes before trying again. If you have access to the error log, look for the informational message that indicates that SQL Server is ready before trying to connect again. [CLIENT: xxx.xxx.xxxx.xxx] I also found this in the event viewer but the computer has been restarted since this message and I have not seen it again. Configuring the Page file for crash dump failed. Make sure there is a page file on the boot partition and that is large enough to contain all physical memory. This is my virtual memory settings: I'm not familiar with WINS so I wasn't sure if that is where I start or how to resolve it. Is the WINS error causing the other problems or should I be looking somewhere else?

  Read the article

• Amazon VPC NAT not working

  - by rpkelly

  I'm trying to create a NAT instance for my VPC to allow instances on private subnets connect to the internet (most importantly, S3). I tried following the instructions here: http://docs.amazonwebservices.com/AmazonVPC/2011-07-15/UserGuide/index.html?VPC_NAT_Instance.html . Unfortunately, the instances in the private subnet (call it 10.10.2.0/24) cannot reach the internet. I have done the following: Create a NAT instance (Amazon's ami-vpc-nat-1.0.0-beta.i386-ebs (ami-d8699bb1)) in public subnet (call it 10.10.1.0/24). Changed "Source / Dest Check" to disabled. Created a new entry in the default routing table (which is used by 10.10.2.0/24) and had it point to the ID of the newly created instance. Associated an Elastic IP address with the NAT instance. Allowed all outbound traffic on the security group of the NAT instance. Ensured that all traffic could pass between the two subnets. I've tried also doing this with an existing instance using iptables, but had no luck. And I have verified that sys.net.ipv4.ip_forward is 1, just in case anyone was wondering. And I still have no internet connectivity from the instances on 10.10.2.0/24. Does anyone have any suggestions?

  Read the article

• Setting up Red Hat Enterprise Linux Server as a mail exchange server

  - by Syedur

  I am a Unix/Linux/Windows Server noob. So, keep that in mind before you throw your stones at my glass house. :P I have a Windows Server 2008 R2 machine that's acting as domain controller, Server A. It's also running a DNS server. I have a Red Hat Enterprise Linux Server 5.3, Server B that is intended for mail server. In order for the mail delivery to happen, I understand that I have to set an MX record on Server A and point it to Server B. Well, I did. I manually added a host name on Server A and pointed to Server B's IP address. Then I added an MX record and pointed it to the host name. That didn't do the trick. After taking the above steps, I used the "dig" command on Server B to lookup the MX record coming back from Server A and it wasn't what I was expecting. What am I doing wrong here? I have noticed that... my Windows machines that are joined to the domain (Server A) are listed under the host names. The machines that are not joined to the domain are not list. This is fine, I am not worried about this. What does concern me, do I have to join the Server B to domain in order for Server A to recognize as a valid host and forward the MX properly? If so, some simple steps on how to join Server B to the domain would also help.

  Read the article

• Where to place Nginx IP blacklist config file?

  - by ProfessionalAmateur

  I have an Nginx web server hosting two sites. I created a blockips.conf file to blacklist IP addresses that are constantly probing the server and included this file in the nginx.conf file. However in my access logs for the sites I still see these IP addresses showing up. Do I need to include the black list in each site's conf instead of the global conf for Nginx? Here is my nginx.conf user nginx; worker_processes 1; error_log /var/log/nginx/error.log warn; pid /var/run/nginx.pid; events { worker_connections 1024; } http { include /etc/nginx/mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log /var/log/nginx/access.log main; sendfile on; keepalive_timeout 65; include /etc/nginx/conf.d/*.conf; # Load virtual host configuration files. include /etc/nginx/sites-enabled/*; # BLOCK SPAMMERS IP ADDRESSES include /etc/nginx/conf.d/blockips.conf; } blockips.conf deny 58.218.199.250; access.log still shows this IP address. 58.218.199.250 - - [27/Sep/2012:06:41:03 -0600] "GET http://59.53.91.9/proxy/judge.php HTTP/1.1" 403 570 "-" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1)" "-" What am I doing incorrectly?

  Read the article

• Cannot ping Google Public DNS on 8.8.8.8

  - by Tibor

  I have a weird problem on my Windows 7 (x64) computer. I seem to cannot ping the Google Public DNS on one of its addresses (while the other works fine). The peculiar thing is that it fails with the General failure. error message which usually means that there is a problem with a network adapter/base connectivity and not a timeout as one would expect. I checked my routing tables for any anomalies and I even flushed them but the problem seems unrelated. All the other hosts I tried ping fine (either respond or timeout). If I try to tracert or connect to the address via browser (yes, I know that it doesn't listen on port 80), it also fails instantaneously. The reason I need to ping 8.8.8.8 is that I commonly use it as a test of Internet conectivity due to it being rememberable. The problem occurs no matter where I connect to the Internet (it is a laptop computer). What could be the cause of this anomaly? Note: I use native IPv6 connectivity.

  Read the article

• Trying to setup catchall mail forwarding on my rackspace's cloudspace server

  - by bob_cobb

  I'm running Ubuntu 12 Precise Pangolin and am trying to configure my server to catchall mail sent to it and forward it to my gmail address. I've been trying lots of examples online like editing my main.cf file which looks like this: smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. myhostname = destiny alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = destiny, localhost.localdomain, localhost relayhost = smtp.sendgrid.net mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_size_limit = 51200000 recipient_delimiter = + inet_interfaces = all inet_protocols = all In my /etc/postfix/virtual I have: @mydomain.com [email protected] @myotherdomain.com [email protected] Which isn't working when I email [email protected] or [email protected]. So I got the recommendation to add the following to my /etc/alias: postmaster:root root:[email protected] restarted postfix, and tried emailing [email protected] or [email protected] but it still won't send. Does anyone have any idea what I'm doing wrong here? I'd appreciate any help.

  Read the article

• Postfix Whitelist before recipient restrictions

  - by GruffTech

  Alright. Some background. We have an anti-spam cluster trucking about 2-3 million emails per day, blocking somewhere in the range of 99% of spam email from our end users. The underlying SMTP server is Postfix 2.2.10. The "Frontline defense" before mail gets carted off to SpamAssassin/ClamAV/ ect ect, is attached below. ...basic config.... smtpd_recipient_restrictions = reject_unauth_destination, reject_rbl_client b.barracudacentral.org, reject_rbl_client cbl.abuseat.org, reject_rbl_client bl.mailspike.net, check_policy_service unix:postgrey/socket ...more basic config.... As you can see, standard RBL services from various companies, as well as a Postgrey service. The problem is, I have one client (out of thousands) who is very upset that we blocked an important email of theirs. It was sent through a russian freemailer who was currently blocked in two of our three RBL servers. I explained the situation to them, however they are insisting we do not block any of their emails. So i need a method of whitelisting ANY email that comes to domain.com, however i need it to take place before any of the recipient restrictions, they want no RBL or postgrey blocking at all. I've done a bit of research myself, http://www.howtoforge.com/how-to-whitelist-hosts-ip-addresses-in-postfix seemed to be a good guide at first, almost fixing my problem, But i want it to accept based on TO address, not originating server.

  Read the article

• Unable to ping domain.local, but can ping server.domain.local

  - by Force Flow

  I have a single windows 2008 server running active directory, group policy, and DNS. DHCP is running from the firewall (this is because there are multiple branch locations, and each location has its own firewall supplying DHCP. But, for this problem, the server and workstation are at the same location). On an XP workstation, if I try to visit \\domain.local or ping domain.local, the workstation can't find it. A ping returns Ping request could not find host domain.local. If I try to visit \\server or \\server.domain.local or ping server or server.domain.local, I'm able to connect normally. If I ping or visit domain.local on the server, I'm able to connect normally. A-Records are in place in the DNS service for server, domain.local, and server.domain.local. A reverse lookup zone also is enabled and PTR records are in place. If I wait 20-30 minutes, I am eventually able to ping and visit domain.local--but, when attempting to ping, it takes 30 second to return an IP address. I am also unable to join a new workstation to the domain during this wait period. If I try, the error message returned is "network path not found". Is there something I'm missing?

  Read the article

< Previous Page | 465 466 467 468 469 470 471 472 473 474 475 476  | Next Page >