Search Results

Search found 18907 results on 757 pages for 'computer history'.

Page 469/757 | < Previous Page | 465 466 467 468 469 470 471 472 473 474 475 476  | Next Page >

• Cannot create zpool, how to get rid of intel raid volume?

  - by nagylzs

  This is a FreeBSD 9.1 amd64 computer. It has 5 disks installed. The ada0 and ada1 disks are used with a hw raid to provide the root filesystem: root@gw:/home/gandalf # ls /dev | grep ada ada0 ada1 ada2 ada3 ada4 root@gw:/home/gandalf # zpool status pool: zroot state: ONLINE scan: none requested config: NAME STATE READ WRITE CKSUM zroot ONLINE 0 0 0 raid/r0s1a ONLINE 0 0 0 errors: No known data errors I want to create a raidz pool for the remaining disks: root@gw:/home/gandalf # zpool create -f data raidz1 ada2 ada3 ada4 cannot create 'data': one or more devices is currently unavailable root@gw:/home/gandalf # dmesg | grep ada2 ada2 at ata4 bus 0 scbus6 target 0 lun 0 ada2: <WDC WD20EARS-00MVWB0 51.0AB51> ATA-8 SATA 2.x device ada2: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) ada2: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) ada2: Previously was known as ad16 root@gw:/home/gandalf # dmesg | grep ada3 ada3 at ata5 bus 0 scbus7 target 0 lun 0 ada3: <SAMSUNG HD103UJ 1AA01118> ATA-7 SATA 2.x device ada3: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) ada3: 953868MB (1953523055 512 byte sectors: 16H 63S/T 16383C) ada3: Previously was known as ad18 GEOM_RAID: Intel-fb8732fa: Disk ada3 state changed from NONE to ACTIVE. GEOM_RAID: Intel-fb8732fa: Subdisk Volume0:0-ada3 state changed from NONE to ACTIVE. root@gw:/home/gandalf # dmesg | grep ada4 ada4 at ata6 bus 0 scbus8 target 0 lun 0 ada4: <TOSHIBA DT01ACA100 MS2OA750> ATA-8 SATA 3.x device ada4: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) ada4: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C) ada4: Previously was known as ad20 root@gw:/home/gandalf # dmesg | grep GEOM_RAID Aha, so ada3 is already part of another raid volume? Let's see: root@gw:/home/gandalf # dmesg | grep GEOM_RAID GEOM_RAID: SiI-130628113902: Array SiI-130628113902 created. GEOM_RAID: SiI-130628113902: Disk ada0 state changed from NONE to ACTIVE. GEOM_RAID: SiI-130628113902: Subdisk SiI Raid1 Set:1-ada0 state changed from NONE to STALE. GEOM_RAID: SiI-130628113902: Disk ada1 state changed from NONE to ACTIVE. GEOM_RAID: SiI-130628113902: Subdisk SiI Raid1 Set:0-ada1 state changed from NONE to STALE. GEOM_RAID: SiI-130628113902: Array started. GEOM_RAID: SiI-130628113902: Subdisk SiI Raid1 Set:0-ada1 state changed from STALE to ACTIVE. GEOM_RAID: SiI-130628113902: Subdisk SiI Raid1 Set:1-ada0 state changed from STALE to RESYNC. GEOM_RAID: SiI-130628113902: Subdisk SiI Raid1 Set:1-ada0 rebuild start at 0. GEOM_RAID: SiI-130628113902: Volume SiI Raid1 Set state changed from STARTING to SUBOPTIMAL. GEOM_RAID: SiI-130628113902: Provider raid/r0 for volume SiI Raid1 Set created. GEOM_RAID: Intel-fb8732fa: Array Intel-fb8732fa created. GEOM_RAID: Intel-fb8732fa: Force array start due to timeout. GEOM_RAID: Intel-fb8732fa: Disk ada3 state changed from NONE to ACTIVE. GEOM_RAID: Intel-fb8732fa: Subdisk Volume0:0-ada3 state changed from NONE to ACTIVE. GEOM_RAID: Intel-fb8732fa: Array started. GEOM_RAID: Intel-fb8732fa: Volume Volume0 state changed from STARTING to DEGRADED. GEOM_RAID: Intel-fb8732fa: Provider raid/r1 for volume Volume0 created. root@gw:/home/gandalf # Yes, indeed. I want to get rid of raid/r1 completely. However, the controller was already set to "IDE" mode in the BIOS. So why it is creating a raid volume??? I have also tried overwritting the first 16k data of ada3 and reboot the computer, but it did not help. How can I delete /dev/raid/r1 ? root@gw:/home/gandalf # graid status Name Status Components raid/r0 SUBOPTIMAL ada0 (ACTIVE (RESYNC 4%)) ada1 (ACTIVE (ACTIVE)) raid/r1 DEGRADED ada3 (ACTIVE (ACTIVE)) root@gw:/home/gandalf # graid delete raid/r1 graid: Array 'raid/r1' not found. root@gw:/home/gandalf # graid delete /dev/raid/r1 graid: Array '/dev/raid/r1' not found. root@gw:/home/gandalf # Thanks

  Read the article

• IP Micro-outages, telephone micro-outages, and CATV micro-outages

  - by Michael Graff

  This is a long and complicated question, mostly because it has been going on for 2.5 years without a solution in sight. It also is only one-third computer related, the other two-thirds are cable TV and cable-phone related. Background I have COX Communications for a cable provider, and we get Internet, digital cable TV, and digital phone service through them. The Internet is a SB5101 right now, and has been a DPC2100 and SB5120 in the past. Same results. The phone service is provided through a telephone interface mounted on the outside of the house (not classic VoIP) and the CATV is through a Scientific Atlanta receiver without DVR. I do have a TiVo connected to the CATV box. Symptoms The CATV shows "blocking" -- sometimes very very short duration where a few blocks appear on the screen. Sometimes it lasts long enough that the video "pauses" for 2-5 seconds, and rarely but not unseen the audio also fails. The CATV decoder box shows no correctable (FEC) or uncorrectable errors. That is, all BER counters are zero for the video stream. The Internet shows "micro-outages" where it appears that sent packets are not making it out, but I continue to receive packets from local modems. That is, pings stop coming back, but I continue to see modems broadcast for DHCP, and sometimes they ask more than once. The cable modem shows no errors during this time, but cable modems lie like you would not believe. It is actually possible to unplug the coax from the modem for 20 seconds and it reports NO ERRORS to the provider's tools. The phone service cuts out for 1-3 seconds, infrequently. When this happens, I hear NOTHING (not even comfort noise) and the remote side hears a "click" as if I were getting a call waiting message. However, there is no call incoming, other than the one I'm currently on of course. Things SEEM to happen more frequently when the temperature outside swings from cold to warm, so fall/spring seems worse than summer/winter. All micro-outages occur between once or twice a day (which I could ignore) to 10 times per hour. All SNR, signal levels, noise levels, etc. show very close to optimal when measured. COX's diagnosis This is a continual pain for me. Over the last 2.5 years, they have opened, "fixed" something, and closed the tickets. They close it without confirming that it is indeed better, and when I reopen they cannot do that, but instead they open a new ticket and send yet another low-level tech out to do the same signal tests and report that all is OK. I've finally gotten a line tech who has a clue and is motivated enough to pursue this with me. We have tried things like switching the local nodes over to UPS and generator power, but this does not trigger the noise. We have tried replacing all cabling, the tap outside my house, the modem, the CATV decoder -- all without resolution. Recently they have decided it is both my computer or switch, my TiVo, and my phone that are all broken and causing this issue. My debugging steps I spent the worse day of my TV-watching life yesterday and part of today. I watched live TV without the TiVo. I witnessed blocking, but it did "feel different." and was actually more severe. Some days it is better, some days it is worse, so perhaps this was just a very bad day. Today, I connected the TiVo to my DVD player, and ran two very long movies through it. I saw no blocking at all during nearly 6 hours of video. Suggestions? Does anyone have any suggestions on what to do next? I understand perhaps only the IP side can be addressed here, but it is one of the more limiting debugging options.

  Read the article

• Windows 7 sometimes boots in VGA mode

  - by TuxRug

  I have an Asus G50VT-x5 laptop with nVidia GeForce9800M-GS graphics. Normally, Windows boots normally, but about 20% of the time (rough estimate), it will boot with the fallback VGA driver, maxing out at 800x600 with no Aero. I've checked the system logs and there is nothing indicating an error loading the nVidia driver. It even specifies in the logs that the Nvidia Display Driver service started successfully, even though it has booted in safe graphics mode. This has been happening for a while, but it's happening a little more often now than it was before. Since the first time my system exhibited this behavior, I have updated my graphics driver a handful of times. I used System Information for Windows to check for problems there, but the only thing that stood out was the following: Core Temperature 4486449 °C (8075639 °F) Shaders Temperature 1171513530 °C (2108724330 °F) I know this reading is incorrect, because my laptop is nowhere near the surface of the sun and my desk has not burst into flames. When it's opererating normally, I get a sane reading like [Core Temperature 58 °C (136 °F)] with no Shaders Temperature listed. All I have to do to resolve the issue is reboot. I have seen no stability issues with the graphics or anything else. A long time ago, I had an issue with this computer where my framerate would suddenly drop during a 3D game from 40fps to <1fps, but after looking at the temperature readout immediately after quitting a game, I removed the bottom panel and blew the dust out of the vent and heatsink. Since then I have no drops in framerate under any situation. I have uploaded a zip containing the SIW reports for when the problem is occurring and when the computer is operating normally. I don't have a paid account so it can only be downloaded 10 times, so please only download the reports if you think you can use them. If you try to download the reports and they are no longer available, please comment and I will re-upload them. If you want to look at the files, they are on Rapidshare. EDIT It happened again, and I looked a little deeper into the System logs. When this happens, there are a lot of errors about other device drivers unable to start. All of these errors are for PnP drivers. Also, my USB keyboard and mouse take a few moments before they actually start working, although this happens sometimes the first normal boot as well. I am quite sure this is related, so I am adding the pnp tag. Also, CHKDSK will not run on boot. Even if a check is scheduled or a volume is manually set as dirty, CHKDSK will be skipped entirely, not even leaving an entry in the System logs. I tried running CHKNTFS /D, which did not work. I then manually changed my HKLM\System\CurrentControlSet\Control\Session Manager BootExecute value to the default listed on Microsoft's website. That did not work either. I ended up booting to repair mode and running CHKDSK there, which found a number of minor inconsistencies on my system drive, but none on my data drive. I have no idea if this is related. Some more information for those who don't download my SIW report file: Antivirus and Firewall are ESET Smart Security I have three different virutalization programs installed: VMware Player, Windows Virtual PC, and VirtualBox. The network adapters for these show up in the log of failed device starts. EDIT 2 I tried running sfc /scannow, which reported that it found corrupted files that could not be fixed. The CBS log is extremely cryptic. I tried booting to my install disk, launching repair mode, and doing an offline sfc from there, which produced the same result.

  Read the article

• Intermittent lockups, unable to diagnose in over a year

  - by Magsol

  Here's a real doosie; I may just give my firstborn child to whomever helps me solve this problem. In July 2008, I assembled what would be my desktop computer for graduate school. Here are the specs of the machine I built: Thermaltake 750W PSU Corsair Dominator 2x2GB 240-pin SDRAM Thermaltake Tower Asus P5K Deluxe Motherboard Intel Core 2 Quad Q9300 2.5GHz CPU 2 x GeForce 8600 GT WD Caviar Blue 640GB hard drive CD burner DVD burner Soon thereafter, I ordered a new motherboard (because I was an idiot; that first motherboard supported CrossFire, not SLI), an Asus P5N-D. I was originally running Windows XP SP3. Pretty much right into the start of the fall semester, my desktop would simply lock up after awhile. If my system was largely idling, it would be after 1-3 days. If was gaming, it often happened an hour or two into my gaming session, indicating a link to activity level. Here's where it started getting interesting. I started looking at the system temps. The CPU was warmer than it should have been (~60s C), so I purchased some more efficient cooling compound a way better cooler for it. Now it hardly goes over 40 C. Intel was even kind enough to swap it out for free, just to rule it out. Lockups continued. The graphics cards were also running pretty warm: about 60 C idling. Removing one of them seemed to improve stability a little bit...as in, it wouldn't lock up quite as frequently, but still always eventually locked up. But it didn't matter which card I used or removed, the lockups continued. I reverted back to the original motherboard, the P5K Deluxe. Lockups continued. I purchased an entirely new motherboard, eVGA's nForce 750i. Lockups continued. Ran memtest86+ over and over and over, with no errors. Even RMA'd the memory. Lockups continued. Replaced the PSU with a Corsair 750W PSU. Lockups continued. Tried disconnecting all IDE drives (HDDs are SATA). Lockups continued. Replaced both graphics cards with a single Radeon HD 4980. Average temps are now always around 50 C when idling, 60 C only when gaming. Lockups continued. Throughout the whole ordeal, the system has been upgraded from Windows XP SP3 to Vista 32-bit, to Vista 64-bit, and is now at Windows 7 64-bit. Lockups have occurred at every step along the way (each OS was in place for at least a few months before the next upgrade). Edit: By "upgrade" I mean clean install each time. In addition to those reformats, I have performed many, many other reformats of the system and a reinstall of whatever OS had been previously installed in an attempt to rectify this problem, to no avail./Edit When the system locks up, there's no blue screen, no reboot, no error message of any kind. It simply freezes in place until I hit the reset button. Very, very rarely, once Windows boots back up, the system informs me that Windows has recovered from an error, but it can never find the source aside from some piece of hardware. I've swapped out every component in this computer, and there are more fans in it than I care to count...though for the sake of completeness: top 80mm case fan (out) rear 80mm case fan (out) rear 120mm case fan (out) front 120mm case fan (in) side 250mm case fan (in) giant CPU fan on-board motherboard fan (the eVGA board) triple-fan memory setup (came with the memory) PSU internal fan another 120mm fan I stuck on the underside of the video card to keep hot air from collecting at the bottom of the case I'm truly out of ideas. ANY help at all would be oh-so-very GREATLY appreciated. Thank you!

  Read the article

• How to get ISA 2006 Web Proxy to work with the Single Network Adapter template

  - by tronda

  I need to test an issue with running our application behind a proxy server with different type of configurations, so I installed ISA 2006 Enterprise on a desktop computer. Since this computer only has a single network card and I want to start out easy, I chose the "Single Network Adapter" template. We have a internal NAT'ed network which is in the 10 range. I have defined the internal network on the ISA server to be 10.XXX.YY.1 - 10.XXX.YY.255 I also have the Default rule which denies all traffic, but I've added the following Rule: Policy - Protocols - From - To Accept HTTP Internal External HTTPS Local Host Internal HTTS Server Localhost Then I configured Internet Explorer on a virutal machine running XP within virtualbox with Brigded network (gets same network address range as regular computers on our network) similar to this Instead of the server name I used the IP address. When I try to access a web page, this doesn't go through and I get the following log messages on the proxy server: Original Client IP Client Agent Authenticated Client Service Referring Server Destination Host Name Transport HTTP Method MIME Type Object Source Source Proxy Destination Proxy Bidirectional Client Host Name Filter Information Network Interface Raw IP Header Raw Payload GMT Log Time Source Port Processing Time Bytes Sent Bytes Received Cache Information Error Information Authentication Server Log Time Client IP Destination IP Destination Port Protocol Action Rule Result Code HTTP Status Code Client Username Source Network Destination Network URL Server Name Log Record Type 10.XXX.YY.174 - TCP - - - 24.08.2010 13:25:24 1080 0 0 0 0x0 0x0 - 24.08.2010 06:25:24 10.XXX.YY.174 10.XXX.YY.175 80 HTTP Initiated Connection MyHTTPAccess 0x0 ERROR_SUCCESS Internal Local Host - PROXYTEST Firewall 10.XXX.YY.175 - TCP - - - 24.08.2010 13:25:24 2275 0 0 0 0x0 0x0 - 24.08.2010 06:25:24 10.XXX.YY.175 10.XXX.YY.175 80 HTTP Initiated Connection 0x0 ERROR_SUCCESS Local Host Local Host - PROXYTEST Firewall 10.XXX.YY.175 - TCP - - - 24.08.2010 13:25:25 2275 0 0 0 0x0 0x0 - 24.08.2010 06:25:25 10.XXX.YY.175 10.XXX.YY.175 80 HTTP Closed Connection 0x80074e20 FWX_E_GRACEFUL_SHUTDOWN Local Host Local Host - PROXYTEST Firewall 10.XXX.YY.175 - TCP - - - 24.08.2010 13:25:25 2276 0 0 0 0x0 0x0 - 24.08.2010 06:25:25 10.XXX.YY.175 10.XXX.YY.175 80 HTTP Initiated Connection 0x0 ERROR_SUCCESS Local Host Local Host - PROXYTEST Firewall 10.XXX.YY.175 - TCP - - - 24.08.2010 13:25:26 2276 0 0 0 0x0 0x0 - 24.08.2010 06:25:26 10.XXX.YY.175 10.XXX.YY.175 80 HTTP Closed Connection 0x80074e20 FWX_E_GRACEFUL_SHUTDOWN Local Host Local Host - PROXYTEST Firewall 10.XXX.YY.175 - TCP - - - 24.08.2010 13:25:26 2277 0 0 0 0x0 0x0 - 24.08.2010 06:25:26 10.XXX.YY.175 10.XXX.YY.175 80 HTTP Initiated Connection 0x0 ERROR_SUCCESS Local Host Local Host - PROXYTEST Firewall 10.XXX.YY.159 - UDP - - - 24.08.2010 13:25:26 68 0 0 0 0x0 0x0 - 24.08.2010 06:25:26 10.XXX.YY.159 255.255.255.255 67 DHCP (request) Denied Connection [Enterprise] Default rule 0xc004000d FWX_E_POLICY_RULES_DENIED Internal Local Host - PROXYTEST Firewall 10.XXX.YY.166 - UDP - - - 24.08.2010 13:25:26 68 0 0 0 0x0 0x0 - 24.08.2010 06:25:26 10.XXX.YY.166 255.255.255.255 67 DHCP (request) Denied Connection [Enterprise] Default rule 0xc004000d FWX_E_POLICY_RULES_DENIED Internal Local Host - PROXYTEST Firewall 0.0.0.0 Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729) Yes Proxy 10.XXX.YY.175 TCP GET Internet - - - Req ID: 096c76ae; Compression: client=No, server=No, compress rate=0% decompress rate=0% - - - 24.08.2010 13:25:27 0 2945 2581 446 0x0 0x40 24.08.2010 06:25:27 10.XXX.YY.174 10.XXX.YY.175 80 http Failed Connection Attempt MyHTTPAccess 10061 anonymous Internal Local Host http://www.vg.no/ PROXYTEST Web Proxy Filter 10.XXX.YY.175 - TCP - - - 24.08.2010 13:25:27 2277 0 0 0 0x0 0x0 - 24.08.2010 06:25:27 10.XXX.YY.175 10.XXX.YY.175 80 HTTP Closed Connection 0x80074e20 FWX_E_GRACEFUL_SHUTDOWN Local Host Local Host - PROXYTEST Firewall

  Read the article

• Server Cabinet/Room Cooling

  - by user37226

  Hello all. I currently have two desktops and three servers in my office sitting on the floor (I know this is bad). With that many servers the ambient temperature in the room goes up quickly. I am located in Dallas, TX so during the winter, if the heat is kept low, it is not a problem, but during the summer it easily jumps the room +10 degrees. I have decided and found a free 42U server cabinet that a hosting company was throwing away to house all of these systems in. One server is in a rack mount case while the other four servers are housed in mid-tower cases. I have purchased shelves for each computer and plan to lay the towers side ways on these shelves (as replacing the cases costs a heck of a lot of money). I like the idea of housing all of these systems in the cabinet because it will save a lot of room and clean up all of the cabling currently laying all over the office floor. When putting this setup together over the next couple of weeks, I want to address issues with dust and cooling. The server cabinet has a fan on top, front plexiglass door and a rear metal door with vent wholes on the bottom. First the cooling issues. I know I am going to want to have cool air enter the bottom of the cabinet and exit the top. I do not want the room heating up though as this will make my work area hot and then make the servers warmer as the air eventually reenters the cabinet. I had an idea to fix this problem, but am unsure if it will work. I was thinking of taking flexible piping and adapting it to the back fans of the computer having the other end of the pipe at the top close to the cabinet's top mounted fan. I was then thinking of creating a duct around the top fan into the attic. Now I am very concerned that the attic will cause issues with this type of setup because during July/August time frame, the attic is easily 120 degrees F. I could also use the flexible pipe to take it to an attic exhaust vent if it would be better to vent it into the 100 degree air outside (at least there may be wind. The other option would be to buy a small portable air conditioner. This may be a possibility, but do I want to spend the extra money on power? I bet this increases the noise. Plus they are around $250 on Amazon. What would you all recommend? Depending on the solution I end up running with above, I would also like to limit the dust that gets into the cabinet. If I were to cut a whole and mount a second cabinet fan on the bottom of the rear door, could I possibly mount a standard home air filter on the other side of that whole? Thanks in advance for your recommendations. I look forward to reading your interesting ideas.

  Read the article

• Server Cabinet/Room Cooling

  - by user37226

  Hello all. I currently have two desktops and three servers in my office sitting on the floor (I know this is bad). With that many servers the ambient temperature in the room goes up quickly. I am located in Dallas, TX so during the winter, if the heat is kept low, it is not a problem, but during the summer it easily jumps the room +10 degrees. I have decided and found a free 42U server cabinet that a hosting company was throwing away to house all of these systems in. One server is in a rack mount case while the other four servers are housed in mid-tower cases. I have purchased shelves for each computer and plan to lay the towers side ways on these shelves (as replacing the cases costs a heck of a lot of money). I like the idea of housing all of these systems in the cabinet because it will save a lot of room and clean up all of the cabling currently laying all over the office floor. When putting this setup together over the next couple of weeks, I want to address issues with dust and cooling. The server cabinet has a fan on top, front plexiglass door and a rear metal door with vent wholes on the bottom. First the cooling issues. I know I am going to want to have cool air enter the bottom of the cabinet and exit the top. I do not want the room heating up though as this will make my work area hot and then make the servers warmer as the air eventually reenters the cabinet. I had an idea to fix this problem, but am unsure if it will work. I was thinking of taking flexible piping and adapting it to the back fans of the computer having the other end of the pipe at the top close to the cabinet's top mounted fan. I was then thinking of creating a duct around the top fan into the attic. Now I am very concerned that the attic will cause issues with this type of setup because during July/August time frame, the attic is easily 120 degrees F. I could also use the flexible pipe to take it to an attic exhaust vent if it would be better to vent it into the 100 degree air outside (at least there may be wind. The other option would be to buy a small portable air conditioner. This may be a possibility, but do I want to spend the extra money on power? I bet this increases the noise. Plus they are around $250 on Amazon. What would you all recommend? Depending on the solution I end up running with above, I would also like to limit the dust that gets into the cabinet. If I were to cut a whole and mount a second cabinet fan on the bottom of the rear door, could I possibly mount a standard home air filter on the other side of that whole? Thanks in advance for your recommendations. I look forward to reading your interesting ideas.

  Read the article

• .AVI Files randomly cease to open, other strange errors too

  - by Ben Franchuk

  I Recently (a couple weeks ago) downloaded the complete series of Seinfeld, all in varying file type. I Watched them in sequence according to season and to airing date, and all was well. All of the files played fine with my media player of choice ("BS Player"), and once I had finished, I went onto watch some other TV I had previously downloaded (The U.S. Series of "The Office"), and after then, some other film and then some music, over the following weeks (keep in mind all of these files are all on the same Hard Drive). Later then, More recently, I Went back to watching Seinfeld. The episodes played well as they did before- with the exclusion of a few in Season 7. I Have not tested all of the episodes in the season, but upon inspection, the majority of them are experiencing this problem; the problem being simply that they don't open! BS Player says that the files are either damaged or that the codecs to play the files are not on my computer-- however I am certain that the files DO have the codecs, and I am pretty sure that they are NOT DAMAGED either. I Have played the files with other players (such as VLC, Media Player Classic, and Windows Media Player), too, only to the same result; of them not opening. Seemingly the only way that I can differentiate between a damaged file and a non-damaged file are the way that the icon shows in Windows Explorer. For example, the below image is how explorer shows the information of a file that is non-damaged... ...and below is how a damaged file appears... The most disturbing and confusing part of this, though, is the last episode in the season- It opens, but not as a video- Instead, as a 1 Hour, 16 Minute, and 35 Second Audio file! The file plays a song for the first 4 or so minutes, and then is pretty much silent (except for some extremely quiet noise) until the last minute or so, when a random array of chopped up sounds and beeping noises play. I Do not recognise the song at the beginning of the file, but by the sounds of it, it is a song by the artist "Mr. Oizo," who's complete works I downloaded a couple weeks before now; and a bit before then I had finished downloading season 9 (not affected by these problems) of Seinfeld. I'd also like to note that the file I told of earlier (which played audio instead of video) reads as the same size as the other files in the season (around 175 MB) and also opens as a video clip. I Have NEVER experienced any of these problems in the past, and they seem to be only effecting the one season of my downloaded TV. The problems have not arisen with any of the other files on my Hard Drive, or any of the files downloaded around the time or after the time of which I downloaded season 7 of Seinfeld- or at least to my noticing. I Use the hard drive these files are located on almost every day, so could that be the cause of these problems? Is this a sign that my HDD is soon going to die? If it helps, the HDD is a Western Digital MyBook 1.5 TB 7500 RPM. It is connected to the computer via U.S.B. 2.0. EDIT! I noticed that this problem is now occurring with Season 9 of Seinfeld- and, presumably, other files on the drive I have yet to check. Please, If you have ANY IDEA AT ALL on what may be causing this or how to fix it, do tell me!

  Read the article

• AMD Catalyst 13.9 installation failure

  - by Simon Verbeke

  Earlier today I installed Windows 8.1, and when I wanted to go into Catalyst Control Center, I noticed some odd error of CCC not being able to display options. I then figured I needed a driver update, so I downloaded the latest drivers, version 13.9, and tried to install them. While it was trying to install the display drivers, I got a blue screen. Tried again and got the same. Then I used an uninstall tool from AMD to remove all traces of my old drivers and tried to install the new drivers. Again, a blue screen. This is all I could think of to try. Would anyone know some other things I can try? EDIT: thought I might want to include the log entry for the crash: - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> - <System> <Provider Name="Microsoft-Windows-WER-SystemErrorReporting" Guid="{ABCE23E7-DE45-4366-8631-84FA6C525952}" EventSourceName="BugCheck" /> <EventID Qualifiers="16384">1001</EventID> <Version>0</Version> <Level>2</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2013-10-19T20:59:25.000000000Z" /> <EventRecordID>26587</EventRecordID> <Correlation /> <Execution ProcessID="0" ThreadID="0" /> <Channel>System</Channel> <Computer>Simon-PC</Computer> <Security /> </System> - <EventData> <Data Name="param1">0x0000007e (0xffffffffc0000005, 0xfffff80002a86dca, 0xffffd00025f250e8, 0xffffd00025f248f0)</Data> <Data Name="param2">C:\WINDOWS\MEMORY.DMP</Data> <Data Name="param3">101913-8953-01</Data> </EventData> </Event> Another edit: As it turns out, the graphics card isn't showing up any more in the device manager. But as far as I can tell, it is still working (the fans are spinning and my screen is plugged into that graphics card). This is solved. it appears that my graphics card is now running with a default windows driver. I also tried the forced method mentioned here: AMD Graphics Drivers won't install properly . But I still get a BSOD. Third edit: Slight succes! Managed to install version 13.4. Everything appears to be working fine now. I think I'm just going to skip version 13.9.

  Read the article

• Rosewill RSV-S5 and it's transferespeeds

  - by DoomStone

  I have just bought a Rosewill RSV-S5, I have installed 5x1,5Tb Western Digital Green disks in it. After that have I created a Raid5 on them all with the software that followed with the hardware. Not the raid it self works fine, but it is SLOW, I can only obtain a maximum of 25 MB/s, and if SABnzbd+ is downloading with 5 MB/s is it having a hard time streaming a normal DIVX (700 mb) movie. Is this normal or is there something wrong? Edit: should be able to handle 3 Gbps = 384 megabytes / second Edit 2: As you can see am I only downloading with 3,76 MB/s and I'm trying to watch V s02e08 (720p), but it is completely unwatchable, as I can see 30 sec, and the it buffers for 20 sec. Edit: Other information there might be required I'm running Windows Server 2008 R2, optimized for program performance. Windows is installed on a 60GB SSD. I have a 50 Mb/s internet connection and a 1 Gb/s LAN, all connected with Cat6 Ethernet cables. The MCE is using a Gigabyte EP35C-DS3R motherboard with 2 GB DDR2 ram. Edit 3: I have used chunk sizes for 128 KB Edit 4: I found this on newegg Pros: Enclosure for 5x2TB hard drive is fine. This is basically a rebranded San Digital TR5M-B product. For support Rosewill tells you to contact San Digital. No direct support from Silicon Image for the computer raid card. Cons: Includes computer Silicon Image 3132 raid card, extremely slow raid 5 write (our tests ~10MB/s). Compare to regular internal local drive write 30-60MB/s. We basically dumped the Sil3132 card and replaced with High Point RocketRaid 622 card for extra $69.99. Note for RR622, turn off ECRC (end to end CRC check) for card to work on IBM xserver. What took 12hrs to copy now took 2-3hrs. San Digital realized the problem and has the newer model TR5M-BP TowerRaid Plus that comes with High Point RocketRaid 622 card. Rosewill should discontinue this product and go with TR5M-BP. Could not get Silicon Image raid management software to work with complicated 2008R2 server with 10 NICs, application doesn't know how to talk to localhost port with all those NICs. No updates from Silicon Image and support from San Digital ignored. Gave up on Sil3132 card. Save yourself from a lot of headaches, get the RR622 card too if you are going to buy this product. Other Thoughts: The newer model is TR5M-BP TowerRaid Plus, comes with High Point RocketRaid 622 raid card for the PC instead of Silicon Image Sil3132. According to San Digital, raid 5 performance for Sil3132 read 80MB/s write 19MB/s, and RR622 read 154MB/s write 149MB/s. Our RR622 tests gave (8TB raid 5) write ~80-110MB/s copying 40GB file took 8mins. So I have now ordered a HighPoint RocketRAID 622 2P ext SATA III and hopes that it will solve my problems.

  Read the article

• How do I connect my Windows XP laptop to the internet?

  - by rubysiddhi

  Hello fellow super users, The Past I have a Acer Travelmate 2300 laptop running Windows XP. 6 months ago I moved into a new apartment and got a new internet connection set up. After getting an internet connection installed in my apartment I reinstalled Windows XP and at the same time wiped my drive clean losing all the original Acer software and drivers. Once XP was reinstalled I had to find all the drivers again to get the Travelmate laptop connected to the internet. So, using my Vista laptop which was connected fine, I went to the Acer Travelmate Series drivers download page to download the necessary drivers. I transferred them to my Acer XP machine and installed them the best I could (there were no easy instructions so I just had to find all the executables and run them). I eventually got connected to the internet but not exactly in the way I had hoped for. The Present To be connected to the internet I need to have an Ethernet cord connecting my computer (via the Ethernet port) to my router. This is a problem since it defeats the purpose of having a Wireless LAN card in my Acer laptop. One of the programs I downloaded from the Acer Travelmate Series page was the Acer Wireless LAN Configuration Utility. This program allows me to see the current network I am connected to and all the available networks I could potentially connect to. It reminds me of XP's Wireless Network Connection window/utility where you can see all available wireless networks, refresh the network list and connect to one of the networks. I should mention that my ISP set up a security enabled wireless network with WPA. This network requires a network key if you want to connect to it. I guess my Vista computer has the network key entered into it already. The problem is that I do not know what the network key is. Now obviously you would say just contact my ISP to get the key. And I will but there is just one extra weird issue. I am able to connect to another unsecured wireless network in the Wireless Network Connection window/utility. I can be on it as long as my Ethernet cable is plugged in. So this is not really wireless is it? And this indicates that even if I do get that network key password from my ISP, I will only solve one of the two problems I have. I will only solve being able to get online as long as I am connected to my router via the Ethernet cable. The Main Questions So how do I enable my acer IPN2220 Wireless LAN Card so that I can use my Acer laptop from anywhere with in my apartment? Or should I first get the network key from my ISP to access my security enabled wireless network? And then deal with getting the acer IPN2220 Wireless LAN Card working? Hard & Learned VS Easy & Stupid Of course contacting the ISP would be easier. Have em just come in here and do there thing. The problem with that is that they do not speak English (yeah, im in Poland) and it'd be a hell of a time trying to understand what they are doing (uncomfortable looking over their shoulder). Also, I want to learn how to do this task myself so that I can fix the problem if it ever happens again. You know, be more self sufficient. I look forward to helpful replies. Thanks, Xaviour

  Read the article

• Using MVVM, how to pass SelectedItems of a XamDataGrid as parameter to the Command raised by the Co

  - by saddaypally

  Hi, I'm trying to pass the item on XamDataGrid on which I do a mouse right click to open a ContextMenu, which raises a Command in my ViewModel. Somehow the method that the Command calls is not reachable in debug mode. This is the snipped from the view <ig:XamDataGrid DataSource="{Binding DrdResults}" Height="700" Width="600"> <ig:XamDataGrid.ContextMenu> <ContextMenu DataContext="{Binding RelativeSource={RelativeSource Mode=Self}, Path=PlacementTarget.DataContext}" AllowDrop="True" Name="cmAudit"> <MenuItem Header="View History" Command="{Binding ViewTradeHistory}" CommandParameter="{Binding Path=SelectedItems}"> </MenuItem> </ContextMenu> </ig:XamDataGrid.ContextMenu> <ig:XamDataGrid.FieldSettings> <ig:FieldSettings AllowFixing="NearOrFar" AllowEdit="False" Width="auto" Height="auto" /> </ig:XamDataGrid.FieldSettings> </ig:XamDataGrid> My code in the corresponding ViewModel for this View is as follows public WPF.ICommand ViewTradeHistory { get { if (_viewTradeHistory == null) { _viewTradeHistory = new DelegateCommand( (object SelectedItems) = { this.OpenTradeHistory(SelectedItems); }); } return _viewTradeHistory; } } And lastly the actual method that gets called by the Command is as below private void OpenTradeHistory(object records) { DataPresenterBase.SelectedItemHolder auditRecords = (DataPresenterBase.SelectedItemHolder)records; // Do something with the auditRecords now. } I'm not sure what am I doing incorrectly here. Any help will be very much appreciated. Thanks, Shravan

  Read the article

• Change font size in ListView - Android/Eclipse

  - by Soren

  How can I change the font size in a ListView element? In my main.xml file, I have tried several different values in for android:textSize (pt,px,sp,dp) and nothing seems to change it. Here is what I have currently for the in my main.xml: <ListView xmlns:android="http://schemas.android.com/apk/res/android" android:id="@android:id/list" android:textColor="#ffffff" android:background="#000080" android:layout_width="fill_parent" android:layout_height="wrap_content" android:clickable="true" android:dividerHeight="1px" android:layout_marginTop="5px" android:textSize="8px"/> Here is my Java: package com.SorenWinslow.TriumphHistory; import android.app.ListActivity; import android.os.Bundle; import android.widget.ArrayAdapter; public class TriumphHistory extends ListActivity { String[] HistoryList; /** Called when the activity is first created. */ @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); ArrayAdapter<String> adapter; HistoryList = getResources().getStringArray(R.array.history); adapter = new ArrayAdapter<String> (this,android.R.layout.simple_list_item_1,HistoryList); setListAdapter(adapter); } }

  Read the article

• How to troubleshoot errors with TeamCity

  - by Tomas Lycken

  I'm following this guide to set up a small environment for source control and automated builds - mostly for learning what it is and how it works, but also for using in those of my hobby projects that I believe will actually be useful some day. However, at the step where he commits and builds, I fail to get a success status in the TeamCity history log. I keep getting the error described in the stack trace below. I have verified with Windows Explorer that the solution file it can't find is actually there, so I really don't know what to do. How do I fix/troubleshoot this? [15:16:06]: Checking for changes [15:16:08]: Clearing temporary directory: C:\Program Files\JetBrains\BuildAgent\temp\buildTmp [15:16:08]: Checkout directory: C:\Program Files\JetBrains\BuildAgent\work\72d50012f70c4588 [15:16:08]: Updating sources: server side checkout... [15:16:08]: [Updating sources: server side checkout...] Building incremental patch for VCS root: DemoProjects [15:16:09]: [Updating sources: server side checkout...] Repository sources transferred [15:16:09]: [Updating sources: server side checkout...] Updating C:\Program Files\JetBrains\BuildAgent\work\72d50012f70c4588 [15:16:10]: Start process: "c:\Program Files\JetBrains\BuildAgent\bin\..\plugins\dotnetPlugin\bin\JetBrains.BuildServer.MsBuildBootstrap.exe" "/workdir:C:\Program Files\JetBrains\BuildAgent\work\72d50012f70c4588" /msbuildPath:C:\Windows\Microsoft.NET\Framework\v4.0.30319\MSBuild.exe [15:16:10]: in: C:\Program Files\JetBrains\BuildAgent\work\72d50012f70c4588 [15:16:11]: TeamCity MSBuild bootstrap v5.1 Copyright (C) JetBrains s.r.o. [15:16:11]: Application failed with internal error: [15:16:11]: Failed to find project file at path: C:\Program Files\JetBrains\BuildAgent\work\72d50012f70c4588\Nehemia\trunk\Nehemiah.sln [15:16:11]: System.Exception: Failed to find project file at path: C:\Program Files\JetBrains\BuildAgent\work\72d50012f70c4588\Nehemia\trunk\Nehemiah.sln [15:16:11]: at JetBrains.BuildServer.MSBuildBootstrap.Impl.MSBuildBootstrapFactory.Create(IClientRunArgs args) in c:\Agent\work\6223f0c8b1d45aaa\src\MSBuildBootstrap.Core\src\Impl\MSBuildBootstrapFactory.cs:line 25 [15:16:11]: at JetBrains.BuildServer.MSBuildBootstrap.Program.Run(String[] _args) in c:\Agent\work\6223f0c8b1d45aaa\src\MSBuildBootstrap\src\Program.cs:line 66 [15:16:11]: Process exited with code -11 [15:16:11]: Build finished

  Read the article

• Data Modeling: Logical Modeling Exercise

  - by swisscheese

  In trying to learn the art of data storage I have been trying to take in as much solid information as possible. PerformanceDBA posted some really helpful tutorials/examples in the following posts among others: is my data normalized? and Relational table naming convention. I already asked a subset question of this model here. So to make sure I understood the concepts he presented and I have seen elsewhere I wanted to take things a step or two further and see if I am grasping the concepts. Hence the purpose of this post, which hopefully others can also learn from. Everything I present is conceptual to me and for learning rather than applying it in some production system. It would be cool to get some input from PerformanceDBA also since I used his models to get started, but I appreciate all input given from anyone. As I am new to databases and especially modeling I will be the first to admit that I may not always ask the right questions, explain my thoughts clearly, or use the right verbage due to lack of expertise on the subject. So please keep that in mind and feel free to steer me in the right direction if I head off track. If there is enough interest in this I would like to take this from the logical to physical phases to show the evolution of the process and share it here on Stack. I will keep this thread for the Logical Diagram though and start new one for the additional steps. For my understanding I will be building a MySQL DB in the end to run some tests and see if what I came up with actually works. Here is the list of things that I want to capture in this conceptual model. Edit for V1.2 The purpose of this is to list Bands, their members, and the Events that they will be appearing at, as well as offer music and other merchandise for sale Members will be able to match up with friends Members can write reviews on the Bands, their music, and their events. There can only be one review per member on a given item, although they can edit their reviews and history will be maintained. BandMembers will have the chance to write a single Comment on Reviews about the Band they are associated with. Collectively as a Band only one Comment is allowed per Review. Members can then rate all Reviews and Comments but only once per given instance Members can select their favorite Bands, music, Merchandise, and Events Bands, Songs, and Events will be categorized into the type of Genre that they are and then further subcategorized into a SubGenre if necessary. It is ok for a Band or Event to fall into more then one Genre/SubGenre combination. Event date, time, and location will be posted for a given band and members can show that they will be attending the Event. An Event can be comprised of more than one Band, and multiple Events can take place at a single location on the same day Every party will be tied to at least one address and address history shall be maintained. Each party could also be tied to more then one address at a time (i.e. billing, shipping, physical) There will be stored profiles for Bands, BandMembers, and general members. So there it is, maybe a bit involved but could be a great learning tool for many hopefully as the process evolves and input is given by the community. Any input? EDIT v1.1 In response to PerformanceDBA U.3) That means no merchandise other than Band merchandise in the database. Correct ? That was my original thought but you got me thinking. Maybe the site would want to sell its own merchandise or even other merchandise from the bands. Not sure a mod to make for that. Would it require an entire rework of the Catalog section or just the identifying relationship that exists with the Band? Attempted a mod to sell both complete albums or song. Either way they would both be in electronic format only available for download. That is why I listed an Album as being comprised of Songs rather then 2 separate entities. U.5) I understand what you bring up about the circular relation with Favorite. I would like to get to this “It is either one Entity with some form of differentiation (FavoriteType) which identifies its treatment” but how to is not clear to me. What am I missing here? u.6) “Business Rules This is probably the only area you are weak in.” Thanks for the honest response. I will readdress these but I hope to clear up some confusion in my head first with the responses I have posted back to you. Q.1) Yes I would like to have Accepted, Rejected, and Blocked. I am not sure what you are referring to as to how this would change the logical model? Q.2) A person does not have to be a User. They can exist only as a BandMember. Is that what you are asking? Minor Issue Zero, One, or More…Oops I admit I forgot to give this attention when building the model. I am submitting this version as is and will address in a future version. I need to read up more on Constraint Checking to make sure I am understanding things. M.4) Depends if you envision OrderPurchase in the future. Can you expand as to what you mean here? EDIT V1.2 In response to PerformanceDBA input... Lessons learned. I was mixing the concept of Identifying / Non-Identifying and Cardinality (i.e. Genre / SubGenre), and doing so inconsistently to make things worse. Associative Tables are not required in Logical Diagrams as their many-to-many relationships can be depicted and then expanded in the Physical Model. I was overlooking the Cardinality in a lot of the relationships The importance of reading through relationships using effective Verb Phrases to reassure I am modeling what I want to accomplish. U.2) In the concept of this model it is only required to track a Venue as a location for an Event. No further data needs to be collected. With that being said Events will take place on a given EventDate and will be hosted at a Venue. Venues will host multiple events and possibly multiple events on a given date. In my new model my thinking was that EventDate is already tied to Event . Therefore, Venue will not need a relationship with EventDate. The 5th and 6th bullets you have listed under U.2) leave me questioning my thinking though. Am I missing something here? U.3) Is it time to move the link between Item and Band up to Item and Party instead? With the current design I don't see a possibility to sell merchandise not tied to the band as you have brought up. U.5) I left as per your input rather than making it a discrete Supertype/Subtype Relationship as I don’t see a benefit of having that type of roll up. Additional Revisions AR.1) After going through the exercise for FavoriteItem, I feel that Item to Review requires a many-to-many relationship so that is indicated. Necessary? Ok here we go for v1.3 I took a few days on this version, going back and forth with my design. Once the logical process is complete, as I want to see if I am on the right track, I will go through in depth what I had learned and the troubles I faced as a beginner going through this process. The big point for this version was it took throwing in some Keys to help see what I was missing in the past. Going through the process of doing a matrix proved to be of great help also. Regardless of anything, if it wasn't for the input given by PerformanceDBA I would still be a lost soul wondering in the dark. Who knows my current design might reaffirm that I still am, but I have learned a lot so I am know I at least have a flashlight in my hand. At this point in time I admit that I am still confused about identifying and non-identifying relationships. In my model I had to use non-identifying relationships with non nulls just to join the relationships I wanted to model. In reading a lot on the subject there seems to be a lot of disagreement and indecisiveness on the subject so I did what I thought represented the right things in my model. When to force (identifying) and when to be free (non-identifying)? Anyone have inputs? EDIT V1.4 Ok took the V1.3 inputs and cleaned things up for this V1.4 Currently working on a V1.5 to include attributes.

  Read the article

• JQgrid - Get Row Number instead of ID

  - by mariojjsimoes

  Hello, all, I am creating a JQGrid from a database table that does not contain a single field primary key. Therefore, the field i am supplying as id is not unique and the same one exists in several rows. Because of this, when passing a reference to the data with ondblClickRow to a function external to the grid i need to use the rownumber and not the id. To test, I'm using ondblClickRow: function(id){alert($("#grid1").getInd('rowid'));}, , and i should be getting and alert with the row number, except that it isn't working. I've been over the documentation and can't understand what i am doing wrong... Any help would be greatly appreciated! Thanks in advance, Mario. Bellow is my full grid: jQuery(document).ready(function(){ var mygrid = jQuery("#grid1").jqGrid({ datatype: 'xmlstring', datastr : grid1RsXML, width: 1024, height: 500, colNames:['DEVICE_ID','JOB_SIZE_IN_BYTES', 'USER_NAME','HOST_NAME','DAY_OF_WEEK','JOB_ID'], colModel:[ {name:'DEVICE_ID',index:'DEVICE_ID', width:55, sortable:true}, {name:'JOB_SIZE_IN_BYTES',index:'JOB_SIZE_IN_BYTES', width:40, sortable:true}, {name:'USER_NAME',index:'USER_NAME', width:60, sortable:true}, {name:'HOST_NAME',index:'HOST_NAME', width:50,align:"right", sortable:true}, {name:'DAY_OF_WEEK',index:'DAY_OF_WEEK', width:10, sortable:true}, {name:'JOB_ID',index:'JOB_ID', width:30, sortable:true} ], rowNum:1000, autowidth: true, //rowList:[10,20,30], rowList:[1], pager: '#grid1Pager', sortname: 'DEVICE_ID', viewrecords: true, rownumbers: true, sortorder: "desc", sortable: true, gridview : true, xmlReader: { root : "recordset", row: "record", repeatitems: false, id: "DEVICE_ID" }, caption:"All Jobs - Double Click for detailed history", ondblClickRow: function(id){alert($("#grid1").getInd('rowid'));}, toolbar: [true,"top"], url: grid1RsXML });

  Read the article

• Negative ItemCount in SharePoint Document Library

  - by ccomet

  What can be done about negative numbers in library item counts? ItemCount is a read-only property, what are you supposed to do when it is drastically incorrect? Earlier last week, I was doing some testing involving the copying and moving of files and folders from one document library to another. I was transfering the items from our actual document library to a sandbox "Test" library that I used to run all sorts of object model and workflow testing in before migrating to the public lists and libraries. I noticed that with files, things worked correctly, but when I copied a folder that had a file inside it (using SPFolder.CopyTo()), the item count for the test library did not actually update. Since this testing was mostly playing around, I paid it little heed. Today I was back in the test library to test a different workflow (regarding PDF conversion). While I was there, I decided to delete the folder I left last week since I didn't need it anymore. And that's when I saw the item count for the list drop to -1 in the All Site Content View. When I deleted the new PDF I had just uploaded, it then dropped to -2! I even checked with the object model... getting an instance of the library I checked the ItemCount property... lo and behold it was also -2. Is there any process which runs in the background, kinda like the one that cleans up workflow history, which will correct this kind of issue? Or is a programmer expected to keep watch for this kind of situation and come up with calculations to compensate the "count penalty", as it were?

  Read the article

• Advice on database design / SQL for retrieving data with chronological order

  - by Remnant

  I am creating a database that will help keep track of which employees have been on a certain training course. I would like to get some guidance on the best way to design the database. Specifically, each employee must attend the training course each year and my database needs to keep a history of all the dates on which they have attend the course in the past. The end user will use the software as a planning tool to help them book future course dates for employees. When they select a given employee they will see: (a) Last attendance date (b) Projected future attendance date(i.e. last attendance date + 1 calendar year) In terms of my database, any given employee may have multiple past course attendance dates: EmpName AttandanceDate Joe Bloggs 1st Jan 2007 Joe Bloggs 4th Jan 2008 Joe Bloggs 3rd Jan 2009 Joe Bloggs 8th Jan 2010 My question is what is the best way to set up the database to make it easy to retrieve the most recent course attendance date? In the example above, the most recent would be 8th Jan 2010. Is there a good way to use SQL to sort by date and pick the MAX date? My other idea was to add a column called ‘MostRecent’ and just set this to TRUE. EmpName AttandanceDate MostRecent Joe Bloggs 1st Jan 2007 False Joe Bloggs 4th Jan 2008 False Joe Bloggs 3rd Jan 2009 False Joe Bloggs 8th Jan 2010 True I wondered if this would simplify the SQL i.e. SELECT Joe Bloggs WHERE MostRecent = ‘TRUE’ Also, when the user updates a given employee’s attendance record (i.e. with latest attendance date) I could use SQL to: Search for the employee and set the MostRecent value to FALSE Add a new record with MostRecent set to TRUE? Would anybody recommended either method over the other? Or do you have a completely different way of solving this problem?

  Read the article

• PayPal IPN Response

  - by Gorkem Tolan

  I am having a problem with PayPal IPN response. After payment is made by the customer, PayPal IPN returns this URL: www.mywebsite.com?orderid=32&tx=2AC67201DL3533325&st=Pending&amt=2.50&cc=USD&cm=&item_number=32 There are a couple of issues Post-back field names are undefined or missing. Thus I can get the INVALID message. I am not sure if my website does not read POST variables. When I looked at IPN history, it shows that each IPN has been sent with the complete url. Payment status keeps coming Pending. Does this issue cause the first issue? Thank you for your responses in advance. Here is the code: Dim strSandbox As String, strLive As String Dim req As HttpWebRequest strSandbox = "http://www.sandbox.paypal.com/cgi-bin/webscr/" strLive = "https://www.paypal.com/cgi-bin/webscr" req = CType(WebRequest.Create(strSandbox), HttpWebRequest) 'Set values for the request back req.Method = "POST" req.ContentType = "application/x-www-form-urlencoded" Dim param() As Byte param = Request.BinaryRead(HttpContext.Current.Request.ContentLength) Dim strRequest As String strRequest = Encoding.ASCII.GetString(param) strRequest = strRequest & "&cmd=_notify-validate" req.ContentLength = strRequest.Length 'Response.Write(strRequest) 'Send the request to PayPal and get the response Dim streamOut As StreamWriter streamOut = New StreamWriter(req.GetRequestStream(), System.Text.Encoding.ASCII) streamOut.Write(strRequest) streamOut.Close() Dim streamIn As StreamReader streamIn = New StreamReader(req.GetResponse().GetResponseStream()) Dim strResponse As String strResponse = streamIn.ReadToEnd() Response.Write(strResponse) streamIn.Close() If (strResponse = "VERIFIED") Then Response.Redirect("thankyou.aspx") ElseIf (strResponse = "INVALID") Then End If

  Read the article

• Migrating complex SVN branch hierarchy to Mercurial

  - by Christian Hang

  Our team has been using SVN for managing an application of decent size and over time a rather complex hierarchy of branches and tags has built up, which is following the basic standard layout for SVN repositories, but is more nested: |-trunk |-branches | |-releases | | |-releaseA | | `-releaseB | `-features | |-featureX | `-featureY |-tags |-releaseA | |-beta | `-RTP `-releaseB |-beta `-RTP (The feature branches are obviously temporary branches but we have to take them into consideration as it won't be feasible to close all of them at once in the near future) For several reasons but primarily because merges have been becoming an increasing pain, we are considering to switch to Mercurial. The main problem we are currently facing is migrating the existing code base without losing our history. I've tried several migration tools (e.g., yasvn2hg, hg convert and svn2hg) with yasvn2hg being the most promising, but none of them seem to be able to deal with nested hierarchies but they all assume that branches and tags are organized in one flat directory respectively. The choice between named branches or clones as the conversion target of old SVN branches is not a limiting factor in this case, as either solution would be appreciated. We are currently experimenting with both options and how they would fit into our current processes but haven't decided on one yet. I'd obviously be interested in recommendations or experiences with similar setups concerning that issue as well. So, what is the best way to convert a nested SVN branch hierarchy like this to Mercurial? Converting one branch at a time into a separate repository would be quite annoying and I am not sure if that would be the right approach in the first place, depending on how the tools handle historic merges and need to be aware of all other branches?

  Read the article

• What is the scope of CONTEXT_INFO in SQL Server?

  - by JasonS

  I am using CONTEXT_INFO to pass a username to a delete trigger for the purposes of an audit/history table. I'm trying to understand the scope of CONTEXT_INFO and if I am creating a potential race condition. Each of my database tables has a stored proc to handle deletes. The delete stored proc takes userId as an parameter, and sets CONTEXT_INFO to the userId. My delete trigger then grabs the CONTEXT_INFO and uses that to update an audit table that indicates who deleted the row(s). The question is, if two deletes sprocs from different users are executing at the same time, can CONTEXT_INFO set in one of the sprocs be consumed by the trigger fired by the other sproc? I've seen this article http://msdn.microsoft.com/en-us/library/ms189252.aspx but I'm not clear on the scope of sessions and batches in SQL Server which is key to the article being helpful! I'd post code, but short on time at the moment. I'll edit later if this isn't clear enough. Thanks in advance for any help.

  Read the article

• Find Port Number and Domain Name to connect to Hive Table

  - by user1419563

  I am new to Hive, MapReduce and Hadoop. I am using Putty to connect to hive table and access records in the tables. So what I did is- I opened Putty and in the host name I typed- ares-ingest.vip.host.com and then I click Open. And then I entered my username and password and then few commands to get to Hive sql. Below is the list what I did $ bash bash-3.00$ hive Hive history file=/tmp/rjamal/hive_job_log_rjamal_201207010451_1212680168.txt hive> set mapred.job.queue.name=hdmi-technology; hive> select * from table LIMIT 1; So my question is- I was trying to connect to Hive Tables using Squirrel SQL Client, so in that my Connection URL is- jdbc:hive://ares-ingest.vip.host.com:10000/default. So whenever I try to connect with these attributes, I always get Hive: Could not establish connection to ares-ingest.vip.host.com:10000/default: java.net.ConnectException: Connection timed out: connect. It might be possible I am using wrong port number or domain name here. Is there any way from the command prompt I can find out these two things, like what Domain Name and Port Number(where Hive server is running) should I use to connect to Hive table from Squirrel SQL Client. As I know host and port are determined by where the hive server is running

  Read the article

• How to roll the log file on startup in logback

  - by Mike Q

  Hi all, I would like to configure logback to do the following. Log to a file Roll the file when it reaches 50MB Only keep 7 days worth of logs On startup always generate a new file (do a roll) I have it all working except for the last item, startup roll. Does anyone know how to achieve that? Here's the config... <appender name="File" class="ch.qos.logback.core.rolling.RollingFileAppender"> <layout class="ch.qos.logback.classic.PatternLayout"> <Pattern>%d{HH:mm:ss.SSS} [%thread] %-5level %logger{36} - %msg \(%file:%line\)%n</Pattern> </layout> <File>server.log</File> <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy"> <FileNamePattern>server.%d{yyyy-MM-dd}.log</FileNamePattern> <!-- keep 7 days' worth of history --> <MaxHistory>7</MaxHistory> <TimeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP"> <MaxFileSize>50MB</MaxFileSize> </TimeBasedFileNamingAndTriggeringPolicy> </rollingPolicy> </appender>

  Read the article

• Distinguishing between .NET exception types

  - by Swingline Rage

  For the love of all things holy, how do you distinguish between different "exception flavors" within the predefined .NET exception classes? For example, a piece of code might throw an XmlException under the following conditions: The root element of the document is NULL Invalid chars are in the document The document is too long All of these are thrown as XmlException objects and all of the internal "tell me more about this exception" fields (such as Exception.HResult, Exception.Data, etc.) are usually empty or null. That leaves Exception.Message as the only thing that allows you to distinguish among these exception types, and you can't really depend on it because, you guessed it, the Exception.Message string is glocabilized, and can change when the culture changes. At least that's my read on the documentation. Exception.HResult and Exception.Data are widely ignored across the .NET libraries. They are the red-headed stepchildren of the world's .NET error-handling code. And even assuming they weren't, the HRESULT type is still the worst, downright nastiest error code in the history of error codes. Why we are still looking at HRESULTs in 2010 is beyond me. I mean if you're doing Interop or P/Invoke that's one thing but... HRESULTs have no place in System.Exception. HRESULTs are a wart on the proboscis of System.Exception. But seriously, it means I have to set up a lot of detailed specific error-handling code in order to figure out the same information that should have been passed as part of the exception data. Exceptions are useless if they force you to work like this. What am I doing wrong?

  Read the article

• Some questions about slugs in ASP.NET MVC content system

  - by mare

  In my application I'm currently using forms which allow to enter Title and Slug fields. Now I've been struggling with the slugs thing for a while because I can never decide once and for all how to handle them. 1) Make Title and Slug indenpendent Should I allow users to enter both Title and Slug separetely? This is what I had first. I also had an option that if user did not enter the Slug it was derived from the Title. If both were enter, the Slug field took precedence. 2) Derive Slug from Title, when content is inserted that's it for the Slug, no more changes Then, I switched to only Title field and derive Slug from title. While doing it I found out that now I have to change all the forms that allowed user to enter a slug. This way of doing it also prevents users to change Slugs - they can change the Title but it has no effect on the Slug. You can think of it like Slug is uniqued ID. 3) Now I'm thinking again of allowing users to change slug Though I don't think it is all that useful. How many times does the content that someone already added, spent time on writing it, even require a change of either Title or slug? I don't think it is that many times. The biggest problem with the 3rd option is that If I use Slugs as IDs, I need to update the reference all over the place when Slug changes. Or maintain a table that would contain somekind of Slug history. What are you thoughts on these, I hope, valid questions?

  Read the article

< Previous Page | 465 466 467 468 469 470 471 472 473 474 475 476  | Next Page >