Search Results

Search found 34195 results on 1368 pages for 'try'.

Page 469/1368 | < Previous Page | 465 466 467 468 469 470 471 472 473 474 475 476  | Next Page >

• Raid 1 array won't assemble after power outage. How do I fix this ext4 mirror?

  - by Forkrul Assail

  Two ext4 drives on Raid 1 with mdadm won't reassemble after the power went out for an extended period (UPS drained). After turning the machine back on, mdadm said that the array was degraded, after which it took about 2 days for a full resync, which completed without problems. On trying to remount the array I get: mount: you must specify the filesystem type cat /etc/fstab lines relevant to setup: /dev/md127 /media/mediapool ext4 defaults 0 0 dmesg | tail (on trying to mount) says: [ 1050.818782] EXT3-fs (md127): error: can't find ext3 filesystem on dev md127. [ 1050.849214] EXT4-fs (md127): VFS: Can't find ext4 filesystem [ 1050.944781] FAT-fs (md127): invalid media value (0x00) [ 1050.944782] FAT-fs (md127): Can't find a valid FAT filesystem [ 1058.272787] EXT2-fs (md127): error: can't find an ext2 filesystem on dev md127. cat /proc/mdstat says: Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10] md127 : active (auto-read-only) raid1 sdj[2] sdi[0] 2930135360 blocks super 1.2 [2/2] [UU] unused devices: <none> fsck /dev/md127 says: fsck from util-linux 2.20.1 e2fsck 1.42 (29-Nov-2011) fsck.ext2: Superblock invalid, trying backup blocks... fsck.ext2: Bad magic number in super-block while trying to open /dev/md127 The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device> mdadm -E /dev/sdi gives me: /dev/sdi: Magic : a92b4efc Version : 1.2 Feature Map : 0x0 Array UUID : 37ac1824:eb8a21f6:bd5afd6d:96da6394 Name : sojourn:33 Creation Time : Sat Nov 10 10:43:52 2012 Raid Level : raid1 Raid Devices : 2 Avail Dev Size : 5860271016 (2794.40 GiB 3000.46 GB) Array Size : 2930135360 (2794.39 GiB 3000.46 GB) Used Dev Size : 5860270720 (2794.39 GiB 3000.46 GB) Data Offset : 262144 sectors Super Offset : 8 sectors State : clean Device UUID : 3e6e9a4f:6c07ab3d:22d47fce:13cecfd0 Update Time : Tue Nov 13 20:34:18 2012 Checksum : f7d10db9 - correct Events : 27 Device Role : Active device 0 Array State : AA ('A' == active, '.' == missing) boot@boot ~ $ sudo mdadm -E /dev/sdj /dev/sdj: Magic : a92b4efc Version : 1.2 Feature Map : 0x0 Array UUID : 37ac1824:eb8a21f6:bd5afd6d:96da6394 Name : sojourn:33 Creation Time : Sat Nov 10 10:43:52 2012 Raid Level : raid1 Raid Devices : 2 Avail Dev Size : 5860271016 (2794.40 GiB 3000.46 GB) Array Size : 2930135360 (2794.39 GiB 3000.46 GB) Used Dev Size : 5860270720 (2794.39 GiB 3000.46 GB) Data Offset : 262144 sectors Super Offset : 8 sectors State : clean Device UUID : 7fb84af4:e9295f7b:ede61f27:bec0cb57 Update Time : Tue Nov 13 20:34:18 2012 Checksum : b9d17fef - correct Events : 27 Device Role : Active device 1 Array State : AA ('A' == active, '.' == missing) machine@user ~ dmesg | tail [ 61.785866] init: alsa-restore main process (2736) terminated with status 99 [ 68.433548] eth0: no IPv6 routers present [ 534.142511] EXT4-fs (sdi): ext4_check_descriptors: Block bitmap for group 0 not in group (block 2838187772)! [ 534.142518] EXT4-fs (sdi): group descriptors corrupted! [ 546.418780] EXT2-fs (sdi): error: couldn't mount because of unsupported optional features (240) [ 549.654127] EXT3-fs (sdi): error: couldn't mount because of unsupported optional features (240) Since this is Raid 1 it was suggested that I try and mount or fsck the drives separately. After a long fsck on one drive, it ended with this as tail: Illegal double indirect block (2298566437) in inode 39717736. CLEARED. Illegal block #4231180 (2611866932) in inode 39717736. CLEARED. Error storing directory block information (inode=39717736, block=0, num=1092368): Memory allocation failed Recreate journal? yes Creating journal (32768 blocks): Done. *** journal has been re-created - filesystem is now ext3 again *** The drive however still doesn't want to mount: dmesg | tail [ 170.674659] md: export_rdev(sdc) [ 170.675152] md: export_rdev(sdc) [ 195.275288] md: export_rdev(sdc) [ 195.275876] md: export_rdev(sdc) [ 1338.540092] CE: hpet increased min_delta_ns to 30169 nsec [26125.734105] EXT4-fs (sdc): ext4_check_descriptors: Checksum for group 0 failed (43502!=37987) [26125.734115] EXT4-fs (sdc): group descriptors corrupted! [26182.325371] EXT3-fs (sdc): error: couldn't mount because of unsupported optional features (240) [27083.316519] EXT4-fs (sdc): ext4_check_descriptors: Checksum for group 0 failed (43502!=37987) [27083.316530] EXT4-fs (sdc): group descriptors corrupted! Please help me fix this. I never in my wildest nightmares thought a complete mirror would die this badly. Am I missing something? Suggestions on fixing this? Could someone explain why it would resync after the powerout, only to seemingly nuke the drive? Thanks for reading. Any help much appreciated. I've tried everything I can think of, including booting and filesystem checking with SystemRescue and Ubuntu liveboot discs.

  Read the article

• Outlook 2013 keeps freezing, semi-consistently

  - by AviD

  I have an oddity of problem with my Outlook's stability. It seems to be freezing up, not at random intervals, but based on a seemingly strange combination of configurations. I have been trying many different combinations, I've even devolved to "Cargo-cult" debugging, since I have no clue what is causing this... Here is my set up - since I don't know for sure which settings are causing the lockup, I'll probably mention irrelevant things: (relatively) clean install of Windows 8 (on hyper-v, if that matters) Clean install of Outlook 2013, fully updated 3 accounts configured: Hotmail account configured with ActiveSync Gmail account Large-ish account (several GB) connected with IMAP Only a few folders are subscribed in IMAP Outlook is set to only display subscribed folders configured to keep messages permanently Google Apps account, connected with IMAP Small account connected with IMAP All folders IMAP subscribed Outlook is set to only display subscribed folders configured to keep messages permanently Several Send/Receive Groups configured, to try different configurations of enabling/disable/partial the different accounts - with different send times, from 60 minutes down to 5 minutes. The problem is that at certain points Outlook completely freezes up and I have to kill it. This is not consistent - there are some things that cause it immediately almost consistently, there are some times that it just happens by itself after some period of time (sometimes a few moments, sometimes a few hours; sometimes while using it, sometimes after I've been away from it for a few hours). I have searched all over, and there seem to be many with similar (apparently) problem, and found numerous "solutions" (some even more cargocultish than mine), but so far none of them worked. I've removed all the accounts, both all together and one at a time, and re-configured them - eventually it freezes up. I've tried uninstalling Outlook, cleaning it up completely - removing files, app settings, registry keys, etc - then reinstalling - eventually it freezes up. I've only enabled the Hotmail account, disabling (but not removing) the Google accounts - apparently this does not lock up. I've enabled the Hotmail and the Gmail accounts, leaving the Apps one disabled - it seems like it does not lock up. With all accounts enabled, it locks up almost immediately after doing a send/receive. With only the Apps account enabled, it seems to not lock up. With the Hotmail and the Apps accounts enabled (Gmail disabled), it seems like it locks up after a random amount of time. With Hotmail enabled, and Gmail and Apps both enabled but set to receive only custom folder downloading (not all subscribed folders) - sometimes it locks up right after a send/receive, sometimes it goes for hours without locking up, and sometimes it only locks up when I send an email. I've tried switching the ports for the Google accounts (SSL/465 vs TLS/587), though I have no idea if this should affect, but no real difference. In short, I honestly have no idea what is actually causing Outlook to lock up, I might be completely barking up the wrong tree. At this point I don't really know what else to try, I'm flipping switches at random here. I would like to have all 3 accounts enabled, ideally in several groups (e.g. pull down only important folders in a group with short interval, and all other folders in a longer interval) - obviously without freezing up at all. I've tried putting in all the important details, if there is anything else important to add please let me know. Another issue that occurred to me might also be connected - the Google accounts don't always synchronize properly, even after a send/receive or "update folder". At least not consistently... though I haven't been able to find a significant connection between this and that.

  Read the article

• Outlook 2007 Does Not Accept Login Credentials, OWA Webmail Does. Troubleshooting Advice?

  - by Chris

  I am trying to connect Outlook 2007 to Exchange (Hosted Exchange from Rackspace). Soon, I will need to roll this out for our entire office. With the Exchange account added to Outlook, Outlook starts up and asks for the user's username and password. Unfortunately, it doesn't like the password I use for it. I can confirm this username (email address) and password combo works by using Outlook WebMail, and another user (in another network/office) confirmed the Exchange account does work within his Outlook client. In my network/office, I can confirm that an Outlook 2007 client (under Windows 7) can connect to the Hosted Exchange server from Rackspace. However, I have not been able to get Outlook 2007 (under Windows XP SP3) to connect to the very same Exchange server Outlook 2007 (under Windows 7) can connect to. Outlook continuously prompts me for the username and password and does not accept the correct combination. Now, regarding the Outlook client that cannot connect/login to Exchange: The user has full admin rights on the workstation We do not run a domain controller/LDAP The firewall on the workstation has been disabled Real time file scanning in Microsoft Security Essentials has been disabled There are no virus scanning applications that would interface with Outlook or an email server. The Exchange account is setup to run on a newly created Outlook profile The network firewall does not log any blocked attempts A packet capture at the router reveals communication between the workstation and the Exchange server or proxy (though, this is SSL encrypted, so I don't know what the computers are saying) I have applied a fix (Added DWORD value of 0 for DefConnectOpts under HKEY_CURRENT_USER\Software\Microsoft\Office\12.0\Outlook\RPC) that was recommended to make RPC function when the workstation does not have a default gateway set. Workstation is configured as DHCP. This fix did nothing, and it may be worth noting the RPC subkey was not present until I added it. RPC service is running on the workstation The program is not running under any compatibility mode. Side note: Outlook 2007 installs with compatibility mode for XP enabled by default in windows 7. Outlook 2007 will not even try to connect to exchange if this compatibility mode is checked. In windows xp, I tried checking compatibility mode for windows 2000, and was unable to connect to exchange as well. Here is the specific configuration I've used in a blank outlook profile: Microsoft Exchange Server: ##MASKED##-MBX-C18.mex07a.mlsrvr.com Username: (Full Email Address: [email protected]) Password: ##MASKED## Outlook Anywhere: Connect to Microsoft Exchange using HTTP Exchange Proxy Settings: Proxy Server: mex07a.emailsrvr.com Check "Connect using SSL only" Under "Only connect to proxy servers...", enter: msstd:mex07a.emailsrvr.com Check "On fast networks, connect using HTTP first, then connect using TCP/IP" Check "On slow networks, connect using HTTP first, then connect using TCP/IP" Proxy authentication settings: Basic Authentication Notes: mex07a.mlsrvr.com and mex07a.emailsrvr.com may look incorrect at first glance, but this is not a typo - these instructions were handed down from rackspace and are confirmed to be working, just not on this workstation. I have tried to use the RpcPing utility but must have been using it wrong. I got as far as "Bad Interface Descriptor". It would seem to me getting Outlook and Exchange to work together would be a breeze, especially since everything is done over port 80 with web services. Unfortunately, the user is stuck with WebMail access only, because Outlook won't accept the Exchange credentials. Do you have any ideas of other things I could try to debug this issue further? Any and all help is greatly appreciated. Thank you! -Chris

  Read the article

• conflict in debian packages

  - by Alaa Alomari

  I have Debian 4 server (i know it is very old) cat /etc/issue Debian GNU/Linux 4.0 \n \l I have the following in /etc/apt/sources.list deb http://debian.uchicago.edu/debian/ stable main deb http://ftp.debian.org/debian/ stable main deb-src http://ftp.debian.org/debian/ stable main deb http://security.debian.org/ stable/updates main apt-get upgrade Reading package lists... Done Building dependency tree... Done You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies. libt1-5: Depends: libc6 (= 2.7) but 2.3.6.ds1-13etch10+b1 is installed locales: Depends: glibc-2.11-1 but it is not installable E: Unmet dependencies. Try using -f. Now it shows that i have Debian 6!! cat /etc/issue Debian GNU/Linux 6.0 \n \l EDIT I have tried apt-get update Get: 1 http://debian.uchicago.edu stable Release.gpg [1672B] Hit http://debian.uchicago.edu stable Release Ign http://debian.uchicago.edu stable/main Packages/DiffIndex Hit http://debian.uchicago.edu stable/main Packages Get: 2 http://security.debian.org stable/updates Release.gpg [836B] Hit http://security.debian.org stable/updates Release Get: 3 http://ftp.debian.org stable Release.gpg [1672B] Ign http://security.debian.org stable/updates/main Packages/DiffIndex Hit http://security.debian.org stable/updates/main Packages Hit http://ftp.debian.org stable Release Ign http://ftp.debian.org stable/main Packages/DiffIndex Ign http://ftp.debian.org stable/main Sources/DiffIndex Hit http://ftp.debian.org stable/main Packages Hit http://ftp.debian.org stable/main Sources Fetched 3B in 0s (3B/s) Reading package lists... Done apt-get dist-upgrade Reading package lists... Done Building dependency tree... Done You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies. libt1-5: Depends: libc6 (= 2.7) but 2.3.6.ds1-13etch10+b1 is installed locales: Depends: glibc-2.11-1 E: Unmet dependencies. Try using -f. apt-get -f install Reading package lists... Done Building dependency tree... Done Correcting dependencies...Done The following extra packages will be installed: gcc-4.4-base libbsd-dev libbsd0 libc-bin libc-dev-bin libc6 Suggested packages: glibc-doc Recommended packages: libc6-i686 The following packages will be REMOVED libc6-dev libedit-dev libexpat1-dev libgcrypt11-dev libjpeg62-dev libmcal0-dev libmhash-dev libncurses5-dev libpam0g-dev libsablot0-dev libtool libttf-dev The following NEW packages will be installed gcc-4.4-base libbsd-dev libbsd0 libc-bin libc-dev-bin The following packages will be upgraded: libc6 1 upgraded, 5 newly installed, 12 to remove and 349 not upgraded. 7 not fully installed or removed. Need to get 0B/5050kB of archives. After unpacking 23.1MB disk space will be freed. Do you want to continue [Y/n]? y Preconfiguring packages ... dpkg: regarding .../libc-bin_2.11.3-2_i386.deb containing libc-bin: package uses Breaks; not supported in this dpkg dpkg: error processing /var/cache/apt/archives/libc-bin_2.11.3-2_i386.deb (--unpack): unsupported dependency problem - not installing libc-bin Errors were encountered while processing: /var/cache/apt/archives/libc-bin_2.11.3-2_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1) Now: it seems there is a conflict!! how can i fix it? and is it true that the server has became debian 6!!?? Thanks for your help

  Read the article

• Computer makes hissing noise, turns off after few seconds

  - by Kaustubh P

  I have a problem similar to the questions posted here and here. This is my config: Asus M3N78-EM, with AMD Phenom X3 720 2800 Black Edition, 4GB Transcend DDR2 RAM, Nvidia 9400GT. HD is a 160 GB IDE, and a LG IDE DVD-ROM. The power button is a bit off, I have removed the cover of the switch, and the only way it turns on is just giving the "stick" under the cover a gentle press. It turns on sometimes, and at other times, I have to cut-off the power from the PSU, and try again. I will describe my problem in as detail as possible, please bear with me: The problem has started in the last week, a few months after I changed the to the powerswitch arrangement as described above. The PC makes a hissing noise, and I wasn't able to pin-point the noise source, because of the various other fans. At first, removing the HD, rebooting w/o the HD, turning it off, reconnecting and booting made the problem go away. But of late, it doesn't happen. As suggested in the other questions, I tried reducing the load by disconnecting both the IDE drives, and the problem (noise + turn-off) still occurs. I also connected another 80G IDE HD,today morning, adn it still made that noise, and turned off. I also opened up the PSU, but I couldn't see any fault in that, I tried rotating the fan by blowing into the blades, and with my fingers, but the hissing noise didn't come from there. Or maybe the speed wasn't enough to evoke that noise. A few weeks ago: I had cleaned the Cabinet and had repasted the processor and its fan using some thermal paste. Could that be at fault? I also used a vacuum to blow the dust out of the PSU, could the power have been too much, to maybe offset the fan or something? A label on the PSU says it uses a ball-bearing fan. That only leaves me with the Processor fan and the processor itself. I didn't try removing the processor fan and processor from the motherboard, and then turning the PC on, fearing damage. Will doing so cause any damage? What can I do to localize and pin-point the problem? Also, after a few tries, the Computer starts up. Sometimes it turns of within 2 seconds, sometimes after the POST. Once it turned off at the grub. Another time it booted completely and then turned off. The only way to ensure that the PC wont turn off, is if the hissing noise stops. EDIT: I suspect it to be the Processor/Processor fan, owing to the source of noise. All the config, except for the Cabinet, is just over a year old. EDIT2: I also just remembered, that I had set the "On-power resume" to turn on, i.e. If I supply he PC with power, it will turn itself on, w/o me needing to press the switch. I had done that to workaround the faulty power-switch, as noted above. EDIT3: I calculated the power my system needs, from the antec site, and I just arrived at 292W

  Read the article

• Cannot open simple script application on mac

  - by streetpc

  Mac OS X 10.6 I created a very simple app, which is only a wrapper of a shell script (so that I can select this script in application selectors, like startup apps). I try to launch it and yesterday it worked, but today I changed the executable script's content and name (with something that perfeclty works in a shell script launched in the Terminal) and it will only display a Finder-iconed dialog saying Cannot open the application because it is not supported on this kind of Mac. I restored the previous script (content/name) but I still get the error! Same when re-bundling the app from scratch, or completely changing the bundle identifier… If I try to open it in the Terminal using open My.app, I get The application cannot be opened because it has an incorrect executable format. But when I executes directly the Contents/MacOS/Script, it allways works (iwth both contents). Also, it is displayed with correct icon and meta-information in the Finder (so I guess the Info.plist is understood). The app's file tree is: Contents/ Info.plist MacOS/ Script (executable bit set, works when launched directly) PkgInfo Resources/ AppIcon.icns Here is the Info.plist content: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>CFBundleExecutable</key> <string>Script</string> <key>CFBundleIconFile</key> <string>AppIcon</string> <key>CFBundleIdentifier</key> <string>asdf.ScriptApp</string> <key>CFBundleInfoDictionaryVersion</key> <string>6.0</string> <key>CFBundleName</key> <string>My script</string> <key>CFBundlePackageType</key> <string>APPL</string> <key>CFBundleShortVersionString</key> <string>1.0</string> <key>CFBundleSignature</key> <string>????</string> <key>CFBundleVersion</key> <string>1</string> <key>LSMinimumSystemVersion</key> <string>10.4</string> </dict> </plist> And the PkgInfo file only contains APPL????. I tested the Script with a simple echo "ok" and echo "ok" >/tmp/test (plus #!/bin/sh header). So my questions are: Is there some kind of validity caching for applications ? based on what ? how do I flush it ? Where does this message come from ? I tried to google it but all I get is a page talking about 32/64 bits Java…

  Read the article

• nginx : backend https, proxy_pass shows ip

  - by Vulpo

  I am using nginx as a reverse proxy listening at port 80 (http). I am using proxy_pass to forward requests to backend http and https servers. Everything works fine for my http server but when I try to reach the https server through nginx reverse proxy the ip of the https server is shown in the client's web browser. I want the uri of the nginx server to be shown instead of the https backend server's ip (once again, this works fine with the http server but not for the https server). See this post on the forum Here is my configuration file : server { listen 80; server_name domain1.com; access_log off; root /var/www; if ($request_method !~ ^(GET|HEAD|POST)$ ) { return 444; } location / { proxy_pass http://ipOfHttpServer:port/; } } server { listen 80; server_name domain2.com; access_log off; root /var/www; if ($request_method !~ ^(GET|HEAD|POST)$ ) { return 444; } location / { proxy_pass http://ipOfHttpsServer:port/; proxy_set_header X_FORWARDED_PROTO https; #proxy_set_header Host $http_host; } } When I try the "proxy_set_header Host $http_host" directive and "proxy_set_header Host $host" the web page can't be reached (page not found). But when I comment it, the ip of the https server is shown in the browser (which is bad). Does anyone have an idea ? My other configs files are : proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; #proxy_hide_header X-Powered-By; proxy_intercept_errors on; proxy_buffering on; proxy_cache_key "$scheme://$host$request_uri"; proxy_cache_path /var/cache/nginx levels=1:2 keys_zone=cache:10m inactive=7d max_size=700m; user www-data; worker_processes 2; error_log /var/log/nginx/error.log; pid /var/run/nginx.pid; events { worker_connections 1024; } http { include /etc/nginx/mime.types; default_type application/octet-stream; access_log /var/log/nginx/access.log; server_names_hash_bucket_size 64; sendfile off; tcp_nopush on; #keepalive_timeout 0; keepalive_timeout 65; tcp_nodelay on; gzip on; gzip_comp_level 5; gzip_http_version 1.0; gzip_min_length 0; gzip_types text/plain text/html text/css image/x-icon application/x-javascript; gzip_vary on; include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; } Thanks for your help !

  Read the article

• How to delete files and folders that cannot be deleted?

  - by glenneroo

  I have a backup copy of a previous Windows' Documents and Settings folder which only contains my original user and within 2 more directories: Favorites and Local Settings. When I try to delete Local Settings I get this error: When I try to delete Favorites, I get this error: I ran this in a cmd shell: attrib *.* -r -a -s -h /s ...but it did not help, nor did it return any errors/warnings. I used Unlocker v1.8.5 and LockHunter repeatedly at multiple levels to see if any files are in use, but both always say: No Files Locked. Update #1: I was able to rename the directory, which now gives me this warning before (trying to) delete: If I press Yes (or Yes to All) then I get this error: Update #2: I let chkdsk /f run which required a reboot since it's on my primary system partition. During Stage 2 scanning, I received about 40 of these: Deleting an index entry from index $0 of file 25. ...followed by: Deleting index entry cookies in index $I30 of file 37576. ...but I still get the first error dialog above when trying to delete. I ran chkdsk again, this time: chkdsk /f /r. Produced no messages. Same result when deleting. Update #3: Digging deeper, the 99 is the name of one of many directories located deep in here: C:\Documents and Settings.OLD\User\Local Settings\Application Data\Microsoft\Messenger\[email protected]\SharingMetadata\[email protected]\DFSR\Staging\CS{D4E4AE55-B5E2-F03B-5189-6C4DA6E41788}\ Inside each of those directories were files with names such as: 2300-{C93D01AC-0739-4FD9-88C7-13D2F21A208E}-v2300-{C93D01AC-0739-4FD9-88C7-13D2F21A208E}-v2300-Downloaded.frx I noticed that, unlike all the directories, I couldn't rename any of these files. I also noticed that the file + dir names were extremely long: Original directory = 194 characters Filenames = 100+ characters Together the length exceeds the 255-char limit which is bad and would explain the error message I posted in Update #1. Partial Solution: Rename all directories until the total path length is less than 100. Afterwards I was able to rename the .frx files, not to mention delete everything inside the Local Settings directory. This is only a partial solution because these (empty) directories are still not deleteable, C:\1\2\Favorites\Wien\What To Do.. C:\1\2\Favorites\Photography\FIRE Same error as above: Here is what Explorer properties shows for both folders: Update #4 (another partial solution): Using harrymc's answer combined with thoroughly reading through this amazing MS-KB article which contains nearly everyone's idea and then some, inconspicuously titled: You cannot delete a file or a folder on an NTFS file system volume. I was able to delete the 2nd folder C:\1\2\Favorites\Photography\FIRE - the problem being that there was an invisible trailing space at the end. I got lucky when I did an auto-complete whilst playing around with the del "\\?\<path>" command which he suggested. NOTE: A normal del did NOT work, nor did deleting from explorer. Now all that is left is the first directory C:\1\2\Favorites\Wien\What To Do.. (yes I tried endlessly with multiple combinations of the above solution ;) Keep 'em coming! =)

  Read the article

• Asus P8P67 Rev. 3.1 Motherboard issues powering on and saving settings

  - by Scott

  Edit: New Information Have some updated information from the old question below: So basically my issue right now is somewhat similar, but I've been able to rule out a couple of things. I don't think this has anything to do with light on the motherboard. No matter what lights are on/off on the motherboard when the computer is off, they don't affect this issue. The main power LED on the Mobo is always lit when the power supply is turned on, and that's what matters anyway. Even when the main power LED is on, the PC will NOT boot up the first time I hit the power switch. I have to go reset the power supply (make all lights turn off on the Mobo and back on), and THEN hit the power switch. Then everything boots up. Also, the BIOS settings are reset every time this happens. Asus Tech Support told me to try jumping the power with something metal to try and rule out that it's a problem with the connectors getting power, or if it's a problem with the case power switch pins - haven't done that yet though. Any ideas? This is a lot simpler than it was before when I thought it had to do with certain LED indicators for RAM, EPU, etc. Original Question So I built my new desktop just about 3 weeks ago. I've been having a few issues which I think are all related to my motherboard, an Asus P8P67 Revision 3.1, but I'm not 100% sure as this is really the first from-scratch build I've ever done. I've posted these questions on the Asus forums, Asus Tech Support, and the Corsair forums as well as I thought it might have something to do with my power supply at one point. None of these avenues have solved my issue until now completely, so I thought I'd come here to see what you guys think. Here's what's happening: My computer is off, and I go to power it on. I press the power switch on the case (Antec Nine Hundred), and nothing seems to happen. Upon further inspection, I see that what this actually does is simply turn on the EPU LED on my motherboard, but doesn't actually boot anything up. I then have to go and flip the main power switch on the power supply off and back on. What this does is turn off all lights on the Motherboard after a few seconds, and turn them all back on (including the EPU LED that was off before I hit the power switch the first time). Now, hitting the power switch works. The machine boots up fine, and starts going through the boot up process. As a side note: My Motherboard is set to "Force BIOS", and every single time I change this to do the opposite, the next time my computer boots up that change reverts itself. I think this may be due to the fact that I am doing the hard reset on the power supply each time, but I'm not sure. I had thought that the Motherboard would keep its BIOS settings unless you did something to the Mobo itself - so this may be a related issue, or something else completely. That's basically it. Once it's on, it's on. It works fine, recognizes all of my hardware, and runs great. All fans/lights in the case work great, and I'm getting standard readings. The next time I go to shut the computer down however, I can expect the same exact process getting it up and running, including being forced to go into BIOS and exit again before I can load Windows. Another side note: If I power on my computer using the power switch DIRECTLY after shutting it down, it powers right back on (I think this is because the EPU LED light doesn't have time to turn off). It looks as if as long as the EPU LED is lit up on the motherboard before I hit the power switch on the case, the thing will boot up fine (although this doesn't explain the "Force BIOS" issue, at least it's something). Any ideas? Thanks guys. P.S. - System Specs Asus P8P67 Rev. 3.1 Motherboard Intel Core i7 2600K Processor 16GB (4x4GB) G-Skill 1600 RAM NVIDIA EVGA GTX 570 Video Card Crucial 128GB SSD HD Corsair 850W Power Supply Seagate 2TB HDD

  Read the article

• e2fsck / resize2fs problems

  - by BlakBat

  I've got 6 drives (each 1.5T, all same model and firmware revision) that are part of a RAID5 array. The RAID5 makes a LVM volume group and a logical group. The latter contains only one ext3 partition. I've recently ran: e2fsck -f /dev/vg03/lv01 && resize2fs -M /dev/vg03/lv01 which exited without an error. Now when I try to mount /dev/vg03/lv01 I get: EXT3-fs error (device dm-0): ext3_check_descriptors: Block bitmap for group 30533 not in group (block 1000532368)! EXT3-fs: group descriptors corrupted! How do I get out of this predicament? This is all the info I can currently give you: fdisk -l /dev/sd[cdefgh] shows (correctly) that they are "Linux raid autodetect" but fdisk now shows: fdisk -l /dev/md0 Disk /dev/md0: 7501.5 GB, 7501495664640 bytes ... Disk identifier: 0x00000000 Disk /dev/md0 doesn't contain a valid partition table (instead of a LVM type partition) fdisk -l /dev/vg03/lv01 Disk /dev/vg03/lv01: 7501.5 GB, 7501491732480 bytes ... Disk identifier: 0x00000000 Disk /dev/vg03/lv01 doesn't contain a valid partition table (instead of a ext3 type partition) I've tried: e2fsck -fy /dev/vg03/lv01 e2fsck 1.41.12 (17-May-2010) e2fsck: Group descriptors look bad... trying backup blocks... Block bitmap for group 30533 is not in group. (block 1000532368) Relocate? yes Inode bitmap for group 30533 is not in group. (block 1000532369) Relocate? yes Pass 1: Checking inodes, blocks, and sizes Relocating group 30533's block bitmap to 1000524246... Error allocating 1 contiguous block(s) in block group 30533 for inode bitmap: Could not allocate block in ext2 filesystem e2fsck: aborted Extra information I can give you: cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active (auto-read-only) raid5 sdg1[0] sdh1[5] sdf1[4] sde1[3] sdc1[2] sdd1[1] 7325679360 blocks level 5, 128k chunk, algorithm 2 [6/6] [UUUUUU] bitmap: 1/175 pages [4KB], 4096KB chunk unused devices: Lastly, all smartctl tests (short and extendend) showed no errors on any of the disks. Should I try to resize2fs to grow /dev/vg03/lv01 and redo a e2fsck ? Should I cfdisk /dev/md0 and /dev/vg03/lv01 back to their real types? Thanks in advance for all and any help. 2011-09-20 UPDATE I issued the following commands and was able to remount the partition, but by viewing the size (df) of before and after, it seems that 1Tb of data have gone missing. By checking the MD5SUMS (from an old backup) of some files with the "same" files from the remounted partition, some errors have been detected. Commands issued to remount the partition were: dumpe2fs /dev/vg03/lv01 Block count: 1000491435<br /> Block size: 4096<br /> tune2fs -O ^has_journal /dev/vg03/lv01 resize2fs -p /dev/vg03/lv01 dumpe2fs /dev/vg03/lv01 Block count: 1831418880<br /> Block size: 4096<br /> mount -o ro,noatime /dev/vg03/lv01 /mnt/raid OK... but files have been damaged / gone missing.

  Read the article

• DNS with name.com and Amazon S3

  - by aledalgrande

  I have a website on a bucket in Amazon S3, and recently started to get emails from Google "Googlebot can't access your site". When I go to Webmaster Tools and I try to fetch in fact it doesn't work. Also people in locations different from mine sometimes reported they could not access the website. Now for curiosity I tried from my terminal: $ host xxx xxx is an alias for xxx.s3-website-us-west-1.amazonaws.com. xxx.s3-website-us-west-1.amazonaws.com is an alias for s3-website-us-west-1.amazonaws.com. s3-website-us-west-1.amazonaws.com has address yyy.yyy.yyy.yyy And when I try with dig: $ dig xxx ; <<>> DiG 9.8.3-P1 <<>> xxx ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 17860 ;; flags: qr rd ra; QUERY: 1, ANSWER: 3, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;xxx. IN A ;; ANSWER SECTION: xxx. 300 IN CNAME xxx.s3-website-us-west-1.amazonaws.com. xxx.s3-website-us-west-1.amazonaws.com. 60 IN CNAME s3-website-us-west-1.amazonaws.com. s3-website-us-west-1.amazonaws.com. 60 IN A yyy ;; Query time: 1514 msec ;; SERVER: 75.75.75.75#53(75.75.75.75) ;; WHEN: Fri Aug 22 12:32:13 2014 ;; MSG SIZE rcvd: 127 It seems OK to me. Why would Google tell me there is a DNS error? UPDATE: Google also cannot fetch robots.txt, but I can fetch it from my browser. UPDATE 2: I have a forwarding on the root to the www.* hostname: $ dig thenifty.me ; <<>> DiG 9.8.3-P1 <<>> thenifty.me ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 49286 ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: ;thenifty.me. IN A ;; AUTHORITY SECTION: thenifty.me. 300 IN SOA ns1hwy.name.com. support.name.com. 1 10800 3600 604800 300 ;; Query time: 148 msec ;; SERVER: 75.75.75.75#53(75.75.75.75) ;; WHEN: Fri Aug 22 13:32:56 2014 ;; MSG SIZE rcvd: 88

  Read the article

• obtaining nimbuzz server certificate for nmdecrypt expert in NetMon

  - by lurscher

  I'm using Network Monitor 3.4 with the nmdecrypt expert. I'm opening a nimbuzz conversation node in the conversation window and i click Expert- nmDecrpt - run Expert that shows up a window where i have to add the server certificate. I am not sure how to retrieve the server certificate for nimbuzz XMPP chat service. Any idea how to do this? this question is a follow up question of this one. Edit for some background so it might be that this is encrypted with the server pubkey and i cannot retrieve the message, unless i debug the native binary and try to intercept the encryption code. I have a test client (using agsXMPP) that is able to connect with nimbuzz with no problems. the only thing that is not working is adding invisible mode. It seems this is some packet sent from the official client during login which i want to obtain. any suggestions to try to grab this info would be greatly appreciated. Maybe i should get myself (and learn) IDA pro? This is what i get inspecting the TLS frames on Network Monitor: Frame: Number = 81, Captured Frame Length = 769, MediaType = ETHERNET + Ethernet: Etype = Internet IP (IPv4),DestinationAddress:[...],SourceAddress:[....] + Ipv4: Src = ..., Dest = 192.168.2.101, Next Protocol = TCP, Packet ID = 9939, Total IP Length = 755 - Tcp: Flags=...AP..., SrcPort=5222, DstPort=3578, PayloadLen=715, Seq=4101074854 - 4101075569, Ack=1127356300, Win=4050 (scale factor 0x0) = 4050 SrcPort: 5222 DstPort: 3578 SequenceNumber: 4101074854 (0xF4716FA6) AcknowledgementNumber: 1127356300 (0x4332178C) + DataOffset: 80 (0x50) + Flags: ...AP... Window: 4050 (scale factor 0x0) = 4050 Checksum: 0x8841, Good UrgentPointer: 0 (0x0) TCPPayload: SourcePort = 5222, DestinationPort = 3578 TLSSSLData: Transport Layer Security (TLS) Payload Data - TLS: TLS Rec Layer-1 HandShake: Server Hello.; TLS Rec Layer-2 HandShake: Certificate.; TLS Rec Layer-3 HandShake: Server Hello Done. - TlsRecordLayer: TLS Rec Layer-1 HandShake: ContentType: HandShake: - Version: TLS 1.0 Major: 3 (0x3) Minor: 1 (0x1) Length: 42 (0x2A) - SSLHandshake: SSL HandShake ServerHello(0x02) HandShakeType: ServerHello(0x02) Length: 38 (0x26) - ServerHello: 0x1 + Version: TLS 1.0 + RandomBytes: SessionIDLength: 0 (0x0) TLSCipherSuite: TLS_RSA_WITH_AES_256_CBC_SHA { 0x00, 0x35 } CompressionMethod: 0 (0x0) - TlsRecordLayer: TLS Rec Layer-2 HandShake: ContentType: HandShake: - Version: TLS 1.0 Major: 3 (0x3) Minor: 1 (0x1) Length: 654 (0x28E) - SSLHandshake: SSL HandShake Certificate(0x0B) HandShakeType: Certificate(0x0B) Length: 650 (0x28A) - Cert: 0x1 CertLength: 647 (0x287) - Certificates: CertificateLength: 644 (0x284) - X509Cert: Issuer: nimbuzz.com,Nimbuzz,NL, Subject: nimbuzz.com,Nimbuzz,NL + SequenceHeader: - TbsCertificate: Issuer: nimbuzz.com,Nimbuzz,NL, Subject: nimbuzz.com,Nimbuzz,NL + SequenceHeader: + Tag0: + Version: (2) + SerialNumber: -1018418383 + Signature: Sha1WithRSAEncryption (1.2.840.113549.1.1.5) - Issuer: nimbuzz.com,Nimbuzz,NL - RdnSequence: nimbuzz.com,Nimbuzz,NL + SequenceOfHeader: 0x1 + Name: NL + Name: Nimbuzz + Name: nimbuzz.com + Validity: From: 02/22/10 20:22:32 UTC To: 02/20/20 20:22:32 UTC + Subject: nimbuzz.com,Nimbuzz,NL - SubjectPublicKeyInfo: RsaEncryption (1.2.840.113549.1.1.1) + SequenceHeader: + Algorithm: RsaEncryption (1.2.840.113549.1.1.1) - SubjectPublicKey: - AsnBitStringHeader: - AsnId: BitString type (Universal 3) - LowTag: Class: (00......) Universal (0) Type: (..0.....) Primitive TagValue: (...00011) 3 - AsnLen: Length = 141, LengthOfLength = 1 LengthType: LengthOfLength = 1 Length: 141 bytes BitString: + Tag3: + Extensions: - SignatureAlgorithm: Sha1WithRSAEncryption (1.2.840.113549.1.1.5) - SequenceHeader: - AsnId: Sequence and SequenceOf types (Universal 16) + LowTag: - AsnLen: Length = 13, LengthOfLength = 0 Length: 13 bytes, LengthOfLength = 0 + Algorithm: Sha1WithRSAEncryption (1.2.840.113549.1.1.5) - Parameters: Null Value - Sha1WithRSAEncryption: Null Value + AsnNullHeader: - Signature: - AsnBitStringHeader: - AsnId: BitString type (Universal 3) - LowTag: Class: (00......) Universal (0) Type: (..0.....) Primitive TagValue: (...00011) 3 - AsnLen: Length = 129, LengthOfLength = 1 LengthType: LengthOfLength = 1 Length: 129 bytes BitString: + TlsRecordLayer: TLS Rec Layer-3 HandShake:

  Read the article

• how to use ajax with json in ruby on rails

  - by rafik860

  I am implemeting a facebook application in rails using facebooker plugin, therefore it is very important to use this architecture if i want to update multiple DOM in my page. if my code works in a regular rails application it would work in my facebook application. i am trying to use ajax to let the user know that the comment was sent, and update the comments bloc. migration: class CreateComments < ActiveRecord::Migration def self.up create_table :comments do |t| t.string :body t.timestamps end end def self.down drop_table :comments end end controller: class CommentsController < ApplicationController def index @comments=Comment.all end def create @comment=Comment.create(params[:comment]) if request.xhr? @comments=Comment.all render :json=>{:ids_to_update=>[:all_comments,:form_message], :all_comments=>render_to_string(:partial=>"comments" ), :form_message=>"Your comment has been added." } else redirect_to comments_url end end end view: <script> function update_count(str,message_id) { len=str.length; if (len < 200) { $(message_id).innerHTML="<span style='color: green'>"+ (200-len)+" remaining</span>"; } else { $(message_id).innerHTML="<span style='color: red'>"+ "Comment too long. Only 200 characters allowed.</span>"; } } function update_multiple(json) { for( var i=0; i<json["ids_to_update"].length; i++ ) { id=json["ids_to_update"][i]; $(id).innerHTML=json[id]; } } </script> <div id="all_comments" > <%= render :partial=>"comments/comments" %> </div> Talk some trash: <br /> <% remote_form_for Comment.new, :url=>comments_url, :success=>"update_multiple(request)" do |f|%> <%= f.text_area :body, :onchange=>"update_count(this.getValue(),'remaining');" , :onkeyup=>"update_count(this.getValue(),'remaining');" %> <br /> <%= f.submit 'Post'%> <% end %> <p id="remaining" >&nbsp;</p> <p id="form_message" >&nbsp;</p> <br><br> <br> if i try to do alert(json) in the first line of the update_multiple function , i got an [object Object]. if i try to do alert(json["ids_to_update"][0]) in the first line of the update_multiple function , there is no dialog box displayed. however the comment got saved but nothing is updated. it seems like the object sent by rails is nil or cant be parsed by JSON.parse(json). questions: 1.how can javascript and rails know that i am dealing with json objects?deos ROR sent it a object format or a text format?how can it check that the json object has been sent 2.how can i see what is the returned json?do i have to parse it?how? 2.how can i debug this problem? 3.how can i get it to work?

  Read the article

• Can't communicate between lan ports on openwrt router

  - by ScaryAardvark

  I've got a WBMR-HP-G300H Buffalo Airstation router on which I've installed the lates OpenWRT software. All is working well (ADSL, WIFI etc) except for one niggle. I can't communicate between lan ports. i.e. if I have one computer connected on lan port 1 and I try to ping another computer on lan port 2 then I get "destination unreachable". I can ping both computers from the router itself and can also ping each computer from a seperate laptop connected wirelessly. All computers are in the same subnet range (10.0.0.?/24). I suspect that I may need to configure a vlan on the switch but everytime I try and do this with various google'ed configuration I keep freezing out all lan-ports and I have to revert back using a wirelessly connected laptop. Here's my /etc/config/network: config interface 'loopback' option ifname 'lo' option proto 'static' option ipaddr '127.0.0.1' option netmask '255.0.0.0' config interface 'lan' option type 'bridge' option proto 'static' option netmask '255.255.255.0' option ipaddr '10.0.0.1' option _orig_ifname 'eth0 wlan0' option _orig_bridge 'true' option ifname 'eth0' config adsl-device 'adsl' option fwannex 'a' option annex 'a2p' config interface 'wan' option _orig_ifname 'nas0' option _orig_bridge 'false' option proto 'pppoa' option encaps 'vc' option atmdev '0' option vci '38' option vpi '0' option username '?????????????' option password '??????????????' Any help would be warmly received. Here's some more config stuff. root@OpenWrt:~# ifconfig -a br-lan Link encap:Ethernet HWaddr 00:24:A5:BD:66:08 inet addr:10.0.0.1 Bcast:10.0.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:226576 errors:0 dropped:346 overruns:0 frame:0 TX packets:269292 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:26771676 (25.5 MiB) TX bytes:183986450 (175.4 MiB) eth0 Link encap:Ethernet HWaddr 00:24:A5:BD:66:08 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) ifb0 Link encap:Ethernet HWaddr 36:60:EC:DF:13:A1 BROADCAST NOARP MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) ifb1 Link encap:Ethernet HWaddr 4A:7B:75:67:54:E0 BROADCAST NOARP MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:780 errors:0 dropped:0 overruns:0 frame:0 TX packets:780 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:58369 (57.0 KiB) TX bytes:58369 (57.0 KiB) mon.wlan0 Link encap:UNSPEC HWaddr 00-24-A5-BD-66-08-00-48-00-00-00-00-00-00-00-00 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2424 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:320188 (312.6 KiB) TX bytes:0 (0.0 B) pppoa-wan Link encap:Point-to-Point Protocol inet addr:81.136.179.204 P-t-P:81.134.80.1 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:258894 errors:0 dropped:0 overruns:0 frame:0 TX packets:212976 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:177341656 (169.1 MiB) TX bytes:25192459 (24.0 MiB) wlan0 Link encap:Ethernet HWaddr 00:24:A5:BD:66:08 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:204063 errors:0 dropped:0 overruns:0 frame:0 TX packets:245516 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:26613140 (25.3 MiB) TX bytes:162799765 (155.2 MiB) root@OpenWrt:~# brctl show bridge name bridge id STP enabled interfaces br-lan 8000.0024a5bd6608 no wlan0 eth0 root@OpenWrt:~# swconfig dev eth0 show Global attributes: enable_vlan: 0 Port 0: pvid: 0 link: port:0 link:up speed:1000baseT full-duplex txflow rxflow Port 1: pvid: 0 link: port:1 link:down Port 2: pvid: 0 link: port:2 link:down Port 3: pvid: 0 link: port:3 link:down Port 4: pvid: 0 link: port:4 link:up speed:100baseT full-duplex txflow rxflow auto Port 5: pvid: 0 link: port:5 link:up speed:100baseT full-duplex txflow rxflow auto Regards Mark.

  Read the article

• ubuntu mount iso but some files are unreadable

  - by Chao

  I'm new to Linux and just installed ubuntu 12.04 amd64 this month. I had failed installing Texlive with texlive2012 iso image. I used the recommended command to mount: "mount -t iso9660 -o ro,loop,noauto /your/texlive2012.iso /mnt " But the installer failed to read some file. The iso is fine, I checked the md5. I extracted everything from iso with archive manager, and it installed successfully. So, why mount is not working? Thanks. UPDATE with furius iso mount tool, mount with Fuse, and it installed, with warning: Summary of warning messages during installation: Downloaded ./archive/calligra-type1.tar.xz, size equal, but md5sum differs; downloading again. While mount with Loop, it failed to install. Updated Error message from terminal, mounted with furius iso mount, loop. texlive2012-20120701_iso$ ./install-tl -gui Loading ./tlpkg/texlive.tlpdb Installing TeX Live 2012 from: . Platform: x86_64-linux = 'x86_64 with GNU/Linux' Distribution: inst (compressed) Directory for temporary files: /tmp Installing [0001/2481, time/total: ??:??/??:??]: 12many [3k] Installing [0002/2481, time/total: 00:00/00:00]: 2up [4k] Installing [0003/2481, time/total: 00:00/00:00]: Asana-Math [457k] Installing [0004/2481, time/total: 00:00/00:00]: ESIEEcv [2k] ... Installing [0265/2481, time/total: 00:10/01:09]: calctab [5k] Installing [0266/2481, time/total: 00:10/01:09]: calligra [42k] Installing [0267/2481, time/total: 00:10/01:09]: calligra-type1 [59k] Downloaded ./archive/calligra-type1.tar.xz, size equal, but md5sum differs; downloading again. ./tlpkg/installer/xz/xzdec.x86_64-linux: (stdin): File is corrupt tar: Unexpected EOF in archive tar: rmtlseek not stopped at a record boundary tar: Error is not recoverable: exiting now untar: untarring /home/lichao/ttt/temp/calligra-type1.tar failed (in /home/lichao/ttt/texmf-dist) untarring /home/lichao/ttt/temp/calligra-type1.tar failed, stopping install. Installation failed. Rerunning the installer will try to restart the installation. Or you can restart by running the installer with: install-tl --profile installation.profile [EXTRA-ARGS] ./install-tl: Could not write to install-tl.log, so flushing messages to stderr. Loading ./tlpkg/texlive.tlpdb Installing TeX Live 2012 from: . Platform: x86_64-linux = 'x86_64 with GNU/Linux' Distribution: inst (compressed) Directory for temporary files: /tmp Installer revision: 26794 Database revision: 26935 Installing [0001/2481, time/total: ??:??/??:??]: 12many [3k] Installing [0002/2481, time/total: 00:00/00:00]: 2up [4k] Installing [0003/2481, time/total: 00:00/00:00]: Asana-Math [457k] Installing [0004/2481, time/total: 00:00/00:00]: ESIEEcv [2k] Installing [0005/2481, time/total: 00:00/00:00]: FAQ-en [1k] ... Installing [0262/2481, time/total: 00:10/01:09]: c90 [2k] Installing [0263/2481, time/total: 00:10/01:09]: cachepic [5k] Installing [0264/2481, time/total: 00:10/01:09]: cachepic.x86_64-linux [1k] Installing [0265/2481, time/total: 00:10/01:09]: calctab [5k] Installing [0266/2481, time/total: 00:10/01:09]: calligra [42k] Installing [0267/2481, time/total: 00:10/01:09]: calligra-type1 [59k] Downloaded ./archive/calligra-type1.tar.xz, size equal, but md5sum differs; downloading again. untar: untarring /home/lichao/ttt/temp/calligra-type1.tar failed (in /home/lichao/ttt/texmf-dist) untarring /home/lichao/ttt/temp/calligra-type1.tar failed, stopping install. Installation failed. Rerunning the installer will try to restart the installation. Or you can restart by running the installer with: install-tl --profile installation.profile [EXTRA-ARGS] Segmentation fault (core dumped) I am sure that the iso is fine. I can open it with archive manager and all files are good. But after mounting it, even archive manager failed to open some files (which can be opened when the iso is opened in archive manager).

  Read the article

• Tomcat and ASP site under IIS6 with SSL

  - by Rafe

  I've been working on migrating our companies' website from it's original server to a new one and am having two different but possibly related problems. The box this is sitting on is a Windows 2003 server x64 running IIS 6. The Tomcat version is 5.5.x as it was the version the original deployment was built on. There are two other sites on the server one in plain HTML, another in PHP and the one I am trying to migrate is a combination of Java and ASP (the introductory/sign in pages being Java as well as many reports used for our clients and the administration pages being in ASP) First of all I can only access the site if I enter the ip followed by :8080 (xxx.xxx.xxx.xxx:8080). The original setup had an index.html file in the root of the site with a bit of javascript in the header that pointed the site to 'www.mysite.com/app/public' but if I try going directly to the site without the 8080 I get a 'page not found error' and the javascript redirector causes the same problem because it doesn't add the 8080 into the URL even though on the original site the 8080 wasn't present so I don't understand why it would need it now. The js redirect looks like this: <script language="JavaScript"> <!-- location.href = "/app/public/" location.replace("/app/public/"); //--> </script> When setting the site up I used the command line to unbind IIS from all of the ip's on the system (there are 12 ip's on this box) because I was led to believe Tomcat wanted to use localhost which wasn't accessible. I'm not sure if this was the right thing to do but I'm throwing it in for the sake of completeness. And actually, at this point trying to go to localhost from the server itself throws up a 'could not connect to localhost' error. If I go to localhost:8080 I get the tomcat welcome page. If I do localhost:8080/app/public I get the intro page to our website. So I'm not sure what I'm even looking at in this case, that is what the proper behavior should be. The second part of the problem is that if I do go to either the ip or localhost such as above (localhost:8080/app/public) and click on our login link it is supposed to transfer me to our login page yet instead I receive a 'could not connect' error and the url has changed to localhost:8443/app/secure. From my research I see that port 8443 is Tomcats SSL port and the server.xml alludes to it as follows: <Connector port="8080" maxHttpHeaderSize="8192" maxThreads="150" minSpareThreads="25" maxSpareThreads="75" enableLookups="false" redirectPort="8443" acceptCount="100" connectionTimeout="20000" disableUploadTimeout="true" /> I have an SSL certificate assigned to the site via IIS and was under the impression that by default Tomcat allowed IIS to handle secure connections but apparently something is munged because it's not working. There is another section in the server.xml that reads like this: <Connector port="8009" enableLookups="false" redirectPort="443" protocol="AJP/1.3" /> Which I'm not sure what it is for although port 443 is the SSL port that IIS uses so I'm confused as to what this is supposed to be doing. Another question I have is when does the isap_redirector actually come into play? How does it know when to try and serve pages through Tomcat and when not to? I've hunted around the 'net for an answer and have yet to find a clear dialogue on the subject. Anyone have any pointers as to where to look for a solution to all of this?

  Read the article

• Do hard drive enclosures fail/is it the HDD or enclosure?

  - by x0a

  I'm having a whole host of problems with an external hard drive that was working just fine a couple of hours ago. I've had this problem before once, and that was about 3 months ago, here's what I documented: So a couple of hours ago I turned off all my computers and shut off the power to all my devices in my room, then went and turned the power off at the main switch so I could change an outlet. A couple hours later, after I've already slowly turned everything back on, I go to my xbox to try and watch a movie and it can't seem to list any of the movies I've got. So I go to my desktop to find that my external hard drive isn't there.. even though it's on and connected. It's also stationary and hidden behind something so there's not a whole lot of tampering/physical wear to that external. I plug it into my laptop to try and see what's going on. It starts making this endless loud screeching noise. None of that clicking that's usually associated with hd damage. It's not listed in my computers, and it shows up in Disk Management as "uninitialized" asking me to choose between two different partition types. After carefully disconnecting it and connecting it back, it asks me to format it, which I cancel. I start googling about my issue, starting to accept the situation, torn as hell and helpless and just about ready to toss the thing. Suddenly the screeching stops, after almost 45 minutes of it going, and Disk Management lists the drive as "Online" and "Healthy". Explorer pops up with all my files! I'm still being really careful with it and weary and treating it as though it's in fragile shape. I've downloaded some S.M.A.R.T. software to read the values and everything is listed as "OK" . No reallocated sectors, no read errors, no seek errors. I also ran a quick self-test, which completed without error. Everything seems fine. It looks to be a perfectly healthy external hard drive. So what the hell was that about? Was it doing some sort of maintenance or self-test? How am I supposed to tell the difference? I would've undoubtedly killed the drive for sure if had it gone on a bit longer. I've got the same problem now, with one exception: it doesn't magically reappear after the screeching stops. Occasionally I manage to get some S.M.A.R.T. diagnostics information, which basically reads everything as fine. The only problem is that my HD isn't initializing (so I can't access anything in it). I'm able to successfully run a quick smart test but not an extended one (I've only tried it once but got conflicting indications as to whether it was actually making any progress or not (was stuck on Random read test). So, final question (if all else fails): Could the hard drive enclosure be failing rather than the HDD? Is this a likely possibility at all? How would I know?

  Read the article

• Windows Media Player won't launch on Vista - how to repair or reinstall it?

  - by rpm1200

  My friend asked me to look at her Acer Aspire laptop with Vista Home Premium as it is no longer playing DVDs. I found that Windows Media Player would not launch. I found this thread, which contained a number of suggestions, none of which solved the problem. Here is what I tried: Tried running WMP via desktop shortcut, QuickLaunch bar or going to Program Files\Windows Media Player\wmplayer.exe. In all cases, wmplayer would launch then terminate immediately (verified through the Processes tab in Task Manager). Tried running wmplayer.exe as Administrator. The UAC dialog would come up, I'd approve, then wmplayer would launch and terminate immediately. Uninstalled all non-Microsoft media programs except RealPlayer, iTunes, QuickTime, Acer Arcade (the laptop owner uses all those apps). Tried running Program Files\Windows Media Player\setup_wm.exe as Administrator, it launched but said that a newer version of WMP was already installed. Deleted the "Windows Media" folder located under %userprofile%\appdata\local\Microsoft then tried starting WMP - wmplayer would launch and terminate immediately. Register wmp.dll by typing "regsvr32 wmp.dll" in an Administrator cmd window then tried starting WMP - wmplayer would launch and terminate immediately. Run "SFC /SCANFILE" in an Administrator cmd window - get an error message that it found invalid system files and could not fix them, so look at the log file cbs.log. The log file shows that there are broken files associated with Windows Sidebar (which the user does not use) but none relating to WMP. Log off to safe mode and run "SFC /SCANFILE" in an Administrator cmd window again - same results. Try to download and install XP WMP - the microsoft.com site recognizes the OS as Genuine and allows the download, but when I launch the installer it says the system is not Genuine. Clicking the link directs me back to IE where I can authenticate the system as Genuine. The installer still fails to recognize the system as Genuine. It is a Genuine Vista installation. Try to run this update (KB931621). The installer said it did not apply to the system. Set Windows Media Player as default in Program Access and Defaults. Same results. Tried running "for %a in (%systemroot%\system32\wm*.dll) do regsvr32 /s %a" in an Administrator cmd window - same results. Went to this Knowledge Base article (947541) and ran the Microsoft Fix It. The Fix It ran successfully, but WMP would still launch and terminate immediately. Multiple reboots in the process of doing all of these steps. After all this, looked in the Application and Security logs. No events pertaining to WMP were logged. The computer was preinstalled with Vista Home Premium and I have the Acer backup DVDs which will reimage the drive. I do not have Vista install DVDs. Reimaging the system is not an option. I'd also rather not restore the system to an earlier point unless it's absolutely necessary. What else can I do to repair or reinstall WMP?

  Read the article

• Cannot open simplest mac application

  - by streetpc

  I created a very simple app, which is only a wrapper of a shell script (so that I can select this script in application selectors, like startup apps). I try to launch it and yesterday it worked, but today I changed the executable script's content and name (with something that perfeclty works in a shell script launched in the Terminal) and it will only display a Finder-iconed dialog saying Cannot open the application because it is not supported on this kind of Mac. I restored the previous script (content/name) but I still get the error! Same when re-bundling the app from scratch, or completely changing the bundle identifier… If I try to open it in the Terminal using open My.app, I get The application cannot be opened because it has an incorrect executable format. But when I executes directly the Contents/MacOS/Script, it allways works (iwth both contents). Also, it is displayed with correct icon and meta-information in the Finder (so I guess the Info.plist is understood). The app's file tree is: Contents/ Info.plist MacOS/ Script (executable bit set, works when launched directly) PkgInfo Resources/ AppIcon.icns Here is the Info.plist content: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>CFBundleExecutable</key> <string>Script</string> <key>CFBundleIconFile</key> <string>AppIcon</string> <key>CFBundleIdentifier</key> <string>asdf.ScriptApp</string> <key>CFBundleInfoDictionaryVersion</key> <string>6.0</string> <key>CFBundleName</key> <string>My script</string> <key>CFBundlePackageType</key> <string>APPL</string> <key>CFBundleShortVersionString</key> <string>1.0</string> <key>CFBundleSignature</key> <string>????</string> <key>CFBundleVersion</key> <string>1</string> <key>LSMinimumSystemVersion</key> <string>10.4</string> </dict> </plist> And the PkgInfo file only contains APPL????. I tested the Script with a simple echo "ok" and echo "ok" >/tmp/test (plus #!/bin/sh header). So my questions are: * Is there some kind of validity caching for applications ? based on what ? how do I flush it ? * Where does this message come from ? I tried to google it but all I get is a page talking about 32/64 bits Java…

  Read the article

• Installing .NET application on IIS 7.5 issues

  - by Juw

  Really need some help here. I am at a loss. I am trying to install a webservice that some other guy wrote in .NET. I have some basic IIS understanding. The webservice works just fine on my dev computer. But now i try to move the webservice to a production server and bad things happens. The webservice has been located in C:\inetpub\wwwroot\ dir on the dev server. But on this production server it is to be located in D:\services\ I have managed to install an application on the production server and everything seems fine and dandy. But when i "Test Settings" in the initial setup i get "Invalid application path" error. But i can just close it down and still install it. But when i try to access the webservice with: http://myserver.com/webservice/GetData nothing happens. Just a blank page and when i check the response headers...500 error. I don´t know what is going on here or where the problem is. I post the config file here so someone hopefully might notice something odd. Thanx in advance! EDIT: The config file is from my dev server. I just copied it to my production server...but that obviously didn´t work :-) UPDATE: I noticed that my dev server run in an Application pool with Net 4 and in "classic" "mode". On the production server it was in NET 4 but in "integrated" mode. So i changed it to "classic". I still get a blank page. But checking the log will output this: 2012-10-03 14:57:00 ip removed GET /boo/GetData - 80 - ip removed Mozilla/5.0+(Windows+NT+6.1;+WOW64;+rv:15.0)+Gecko/20100101+Firefox/15.0.1 404 2 1260 203 <?xml version="1.0" encoding="UTF-8"?> <configuration> <system.web> <identity impersonate="true" /> <!-- Impersonate NT AUTHORITY/IUSR --> <compilation targetFramework="4.0"> <assemblies> <add assembly="System.Data.Entity, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b7735c561131e089" /> </assemblies> </compilation> <pages controlRenderingCompatibilityVersion="3.5" clientIDMode="AutoID" /> </system.web> <system.webServer> <modules runAllManagedModulesForAllRequests="true" /> <httpErrors existingResponse="PassThrough" /> <httpProtocol> <customHeaders> <add name="Access-Control-Allow-Origin" value="*" /> </customHeaders> </httpProtocol> <directoryBrowse enabled="false" /> </system.webServer> <system.serviceModel> <serviceHostingEnvironment aspNetCompatibilityEnabled="true" /> <standardEndpoints> <webHttpEndpoint> <!-- Configure the WCF REST service base address via the global.asax.cs file and the default endpoint via the attributes on the <standardEndpoint> element below --> <standardEndpoint name="" helpEnabled="true" automaticFormatSelectionEnabled="true" /> </webHttpEndpoint> </standardEndpoints> </system.serviceModel> <connectionStrings> <add name="Entities" connectionString="metadata=res://*/DataModel.csdl|res://*/DataModel.ssdl|res://*/DataModel.msl;provider=System.Data.SqlClient;provider connection string=&quot;data source=someip;initial catalog=db_90;User ID=user1;Password=access2;multipleactiveresultsets=True;App=EntityFramework&quot;" providerName="System.Data.EntityClient" /> </connectionStrings> </configuration>

  Read the article

• Debian dependency problems / partially installed

  - by Michael

  I tried to install curl support for php 5 on my debian squeeze machine and since I'm having problems. After trying to install curl I got dependency issues which I tried to solve by removing what started the issues. From one thing came another and I'm currently looking at ~29 issues when I try to do an apt-get upgrade. These issues vary from unable to config, dependency and unable to remove errors. I tried apt-get upgrade -f and installing packages using dpkg command. I tried removing using purge and force. I manually removed stuff to try and fix it. I tried running dpkg --configure -a. I've to say I'm still pretty new to linux so I'm out of idea's and cant seem to find an answer online that matches my problems. Here's a part of the apt-get upgrade command output: Reading package lists... Building dependency tree... Reading state information... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 29 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Setting up libgeoip1 (1.4.7~beta6+dfsg-1) ... Bus error dpkg: error processing libgeoip1 (--configure): subprocess installed post-installation script returned error exit status 135 Setting up libisc62 (1:9.7.3.dfsg-1~squeeze3) ... Bus error dpkg: error processing libisc62 (--configure): subprocess installed post-installation script returned error exit status 135 dpkg: dependency problems prevent configuration of libdns69: libdns69 depends on libgeoip1 (>= 1.4.7~beta6+dfsg); however: Package libgeoip1 is not configured yet. libdns69 depends on libisc62; however: Package libisc62 is not configured yet. dpkg: error processing libdns69 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libisccc60: libisccc60 depends on libisc62; however: Package libisc62 is not configured yet. dpkg: error processing libisccc60 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libisccfg62: libisccfg62 depends on libdns69; however: Package libdns69 is not configured yet. .. continues Errors were encountered while processing: libgeoip1 libisc62 libdns69 libisccc60 libisccfg62 libbind9-60 liblwres60 bind9-host libavahi-core7 libdaemon0 avahi-daemon libexif12 libffi5 libgomp1 libgphoto2-port0 libgphoto2-2 libperl5.10 libsensors4 libsnmp15 libhpmud0 libieee1284-3 libnss-mdns libossp-uuid16 libpq5 libv4l-0 libsane libsane-hpaio libssh2-1 python-gobject dpkg --configure -a Setting up libpq5 (8.4.8-0squeeze2) ... Bus error dpkg: error processing libpq5 (--configure): subprocess installed post-installation script returned error exit status 135 Setting up libperl5.10 (5.10.1-17squeeze2) ... Bus error dpkg: error processing libperl5.10 (--configure): subprocess installed post-installation script returned error exit status 135 Setting up libffi5 (3.0.9-3) ... Bus error dpkg: error processing libffi5 (--configure): subprocess installed post-installation script returned error exit status 135 Setting up libexif12 (0.6.19-1) ... .. continues Suggestions are really welcome I really don't know what to do. Michael.

  Read the article

• AMD Catalyst 13.9 installation failure

  - by Simon Verbeke

  Earlier today I installed Windows 8.1, and when I wanted to go into Catalyst Control Center, I noticed some odd error of CCC not being able to display options. I then figured I needed a driver update, so I downloaded the latest drivers, version 13.9, and tried to install them. While it was trying to install the display drivers, I got a blue screen. Tried again and got the same. Then I used an uninstall tool from AMD to remove all traces of my old drivers and tried to install the new drivers. Again, a blue screen. This is all I could think of to try. Would anyone know some other things I can try? EDIT: thought I might want to include the log entry for the crash: - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> - <System> <Provider Name="Microsoft-Windows-WER-SystemErrorReporting" Guid="{ABCE23E7-DE45-4366-8631-84FA6C525952}" EventSourceName="BugCheck" /> <EventID Qualifiers="16384">1001</EventID> <Version>0</Version> <Level>2</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2013-10-19T20:59:25.000000000Z" /> <EventRecordID>26587</EventRecordID> <Correlation /> <Execution ProcessID="0" ThreadID="0" /> <Channel>System</Channel> <Computer>Simon-PC</Computer> <Security /> </System> - <EventData> <Data Name="param1">0x0000007e (0xffffffffc0000005, 0xfffff80002a86dca, 0xffffd00025f250e8, 0xffffd00025f248f0)</Data> <Data Name="param2">C:\WINDOWS\MEMORY.DMP</Data> <Data Name="param3">101913-8953-01</Data> </EventData> </Event> Another edit: As it turns out, the graphics card isn't showing up any more in the device manager. But as far as I can tell, it is still working (the fans are spinning and my screen is plugged into that graphics card). This is solved. it appears that my graphics card is now running with a default windows driver. I also tried the forced method mentioned here: AMD Graphics Drivers won't install properly . But I still get a BSOD. Third edit: Slight succes! Managed to install version 13.4. Everything appears to be working fine now. I think I'm just going to skip version 13.9.

  Read the article

• Cannot open simplest script mac application

  - by streetpc

  I created a very simple app, which is only a wrapper of a shell script (so that I can select this script in application selectors, like startup apps). I try to launch it and yesterday it worked, but today I changed the executable script's content and name (with something that perfeclty works in a shell script launched in the Terminal) and it will only display a Finder-iconed dialog saying Cannot open the application because it is not supported on this kind of Mac. I restored the previous script (content/name) but I still get the error! Same when re-bundling the app from scratch, or completely changing the bundle identifier… If I try to open it in the Terminal using open My.app, I get The application cannot be opened because it has an incorrect executable format. But when I executes directly the Contents/MacOS/Script, it allways works (iwth both contents). Also, it is displayed with correct icon and meta-information in the Finder (so I guess the Info.plist is understood). The app's file tree is: Contents/ Info.plist MacOS/ Script (executable bit set, works when launched directly) PkgInfo Resources/ AppIcon.icns Here is the Info.plist content: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>CFBundleExecutable</key> <string>Script</string> <key>CFBundleIconFile</key> <string>AppIcon</string> <key>CFBundleIdentifier</key> <string>asdf.ScriptApp</string> <key>CFBundleInfoDictionaryVersion</key> <string>6.0</string> <key>CFBundleName</key> <string>My script</string> <key>CFBundlePackageType</key> <string>APPL</string> <key>CFBundleShortVersionString</key> <string>1.0</string> <key>CFBundleSignature</key> <string>????</string> <key>CFBundleVersion</key> <string>1</string> <key>LSMinimumSystemVersion</key> <string>10.4</string> </dict> </plist> And the PkgInfo file only contains APPL????. I tested the Script with a simple echo "ok" and echo "ok" >/tmp/test (plus #!/bin/sh header). So my questions are: Is there some kind of validity caching for applications ? based on what ? how do I flush it ? Where does this message come from ? I tried to google it but all I get is a page talking about 32/64 bits Java…

  Read the article

• Windows Media Player won't launch on Vista - how to repair or reinstall it?

  - by rpm1200

  My friend asked me to look at her Acer Aspire laptop with Vista Home Premium as it is no longer playing DVDs. I found that Windows Media Player would not launch. I found this thread, which contained a number of suggestions, none of which solved the problem. Here is what I tried: Tried running WMP via desktop shortcut, QuickLaunch bar or going to Program Files\Windows Media Player\wmplayer.exe. In all cases, wmplayer would launch then terminate immediately (verified through the Processes tab in Task Manager). Tried running wmplayer.exe as Administrator. The UAC dialog would come up, I'd approve, then wmplayer would launch and terminate immediately. Uninstalled all non-Microsoft media programs except RealPlayer, iTunes, QuickTime, Acer Arcade (the laptop owner uses all those apps). Tried running Program Files\Windows Media Player\setup_wm.exe as Administrator, it launched but said that a newer version of WMP was already installed. Deleted the "Windows Media" folder located under %userprofile%\appdata\local\Microsoft then tried starting WMP - wmplayer would launch and terminate immediately. Register wmp.dll by typing "regsvr32 wmp.dll" in an Administrator cmd window then tried starting WMP - wmplayer would launch and terminate immediately. Run "SFC /SCANFILE" in an Administrator cmd window - get an error message that it found invalid system files and could not fix them, so look at the log file cbs.log. The log file shows that there are broken files associated with Windows Sidebar (which the user does not use) but none relating to WMP. Log off to safe mode and run "SFC /SCANFILE" in an Administrator cmd window again - same results. Try to download and install XP WMP - the microsoft.com site recognizes the OS as Genuine and allows the download, but when I launch the installer it says the system is not Genuine. Clicking the link directs me back to IE where I can authenticate the system as Genuine. The installer still fails to recognize the system as Genuine. It is a Genuine Vista installation. Try to run this update (KB931621). The installer said it did not apply to the system. Set Windows Media Player as default in Program Access and Defaults. Same results. Tried running "for %a in (%systemroot%\system32\wm*.dll) do regsvr32 /s %a" in an Administrator cmd window - same results. Went to this Knowledge Base article (947541) and ran the Microsoft Fix It. The Fix It ran successfully, but WMP would still launch and terminate immediately. Multiple reboots in the process of doing all of these steps. After all this, looked in the Application and Security logs. No events pertaining to WMP were logged. The computer was preinstalled with Vista Home Premium and I have the Acer backup DVDs which will reimage the drive. I do not have Vista install DVDs. Reimaging the system is not an option. I'd also rather not restore the system to an earlier point unless it's absolutely necessary. What else can I do to repair or reinstall WMP?

  Read the article

• Hosed Windows 7 permissons

  - by Anthony

  Here is the most interesting thing I've noticed since the problems started: If I go into a control panel/system module (in this case the Resource Monitor) that has a "Check Online" type option, Firefox (my default browser) opens right up without a problem. But if I just start Firefox from any shortcuts (start menu, desktop, etc), the Firefox process starts up (and the start menu icon starts glowing) only to end without notice a few seconds later. Possibly related: If I start up in Safe-Mode (w/o Networking, but haven't tried with yet), I can start up FF or Chrome just fine, but if I attempt to open Chrome normally, I get a permissions error. Opera and Safari seem to be okay (mostly). Safari crashes when I try to download any files. All of the above leads me to believe that some (but clearly not all) core files have messed up permissions. Or rather, that I no longer have permission. System still does, based on Firefox opening without fail when the system initiates it. I've run MS Forefront once in normal mode, Malwarebytes twice in normal mode and once in safe-mode. One trojan found and deleted, but the problem persists. Two other things worth mentioning: I accidentally duplicated my library... I thought I'd try to add the "Internet" folder to my start menu, next to music and downloads. The first advanced thing I tried was "create new library". I clearly misunderstood what this means. I thought it was a way to add virtual folders to the library (which I thought, in turn, would allow me to choose it as a link on the start menu), but instead it recreated my already existing user folder, AppData and all. I didn't notice this until today. Then I tried setting permissions for my User folder to full control, recursively... Confused but not giving up,I thought I could maybe create a shortcut to the NetHood folder manually, but instead got hit with an access denied error. So I tried to change the permission levels for all sub-folders to my user folder so that I had full control. I got several access denied errors along the way. At this point I gave up, went out, ended up caught in the rain and stuck on a friend's couch and showing up late for work the next day. Thanks for nothing, Microsoft. When I finally got home today (20 hours later), I noticed that Firefox was acting really strange. I tried opening Chrome to see if the problem was client side or server side, and instead got the above-mentioned "you don't have permission to open this program" alert. And I think that's the whole story. Oh, I also did a system restore, but not chose a point from this morning (an auto update), and it worked but the problem wasn't fixed. And then all the earlier restore points were gone. So the questions are: a) is there a way to set the admin and user privs back to "default"? b) would this, in anyone's expert opinion, fix the problems I'm having? c) how come being logged in as an admin isn't the same as being logged in with admin privs? It seems that half the time I have to do run as admin for fairy standard things because i'm being treated as me-theuser and not me-theadmin. Thanks for reading.

  Read the article

< Previous Page | 465 466 467 468 469 470 471 472 473 474 475 476  | Next Page >