Search Results

Search found 3193 results on 128 pages for 'reboot'.

Page 47/128 | < Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >

• Error in mounting HDD

  - by Vikramjeet

  I am getting the following error whenever I mount my external HDD. It was working before and then I opted for safely removing the drive. Now its giving me following error Error mounting: mount exited with exit code 13: ntfs_mst_post_read_fixup_warn: magic: 0x43425355 size: 4096 usa_ofs: 8850 usa_count: 65535: Invalid argument Actual VCN (0x800006009000000) of index buffer is different from expected VCN (0x0). Failed to mount '/dev/sdb1': Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details.

  Read the article

• Purple screen on boot, iMac

  - by Eugene B

  I have just installed Ubuntu 13.10 (special iMac iso found here) on the new iMac (dual boot). Installation of rEFIt was completed successfully, as well as the installation of Ubuntu itself. After the final reboot, rEFIt sees this distributive and allows the choice. When I select "Boot linux from HD", it sends me to grub screen, where I can select Ubuntu. And then it gets stuck on the purple screen (smpboot: Booting Node 0, Processors #1 -- for the recovery mode) with no further action. Does anybody know a solution to this problem? P.S.: I have also tried both 32 and 64-bit pc distributives (occasionally) with the same result.

  Read the article

• Unknown file system : grub Rescue

  - by Rahul Rodrigues

  I have Lenovo Y560 Laptop on which installed Windows 7 and Ubuntu 11.10 as dual boot.Due to some reason i had to recover boot loader using bootrec.exe /fixmbr and bootrec.exe /fix boot,It created one partition of size 198MB named "tet" and my both os were working fine. Ysterday while making some changes in partition table i deleted that "tets" partition and after reboot im getting following error Error:unknow filesystem grub rescue i tried to boot from windows installer cd and but it stucks at "starting windows" so not able to run commands which i have mentioned earliar and tried to boot from Ubuntu 11.10,it stucks after showing following error memory full can't kill anymore process. Please help me out

  Read the article

• Ubiquity crashes when installing Ubuntu 10.10 from CD

  - by Ashes

  I didn't want to take any risks so I ordered a CD from Canonical to get Ubuntu. Thing is, another CD was given to me about 2 days before the CD from Canonical got to me, so I installed Ubuntu 10.10 but there was a problem with the login screen (When the Ubuntu logo should be displayed, it wasn't, instead it would just say "Ubuntu 10.10") so I decided to reinstall Ubuntu 10.10 with the CD that arrived a few days later. Whenever it's finishing the installation, the installer (ubiquity) crashes, or sometimes it gets to the part where the boot loader should be installed and for some reason it is unable to install the boot loader (if I choose not to install it, I don't get how to start Ubuntu, since you have to reboot my laptop after the installation is over). I'm currently running Ubuntu 10.10 from the CD I ordered, since I have no other OS on this laptop.

  Read the article

• How do I make Powertop changes permanent?

  - by arno

  I'm on a Compaq 615 and it's fan is loud as hell. Not much you can do about that but I'm trying to keep the CPU/GPU as cool as possible. This is what Powertop has to say: If I change all of them to "good", the changes don't survive a reboot. Also, upon exiting Powertop I get this: Loaded 8 prior measurements Cannot load from file /var/cache/powertop/saved_parameters.powertop Leaving PowerTOP I added the line to the "grub"-file as suggested here Upon closing gedit I get this: (gedit:2728): Gtk-WARNING **: Attempting to store changes into `/root/.local/share/recently-used.xbel', but failed: Datei »/root/.local/share/recently-used.xbel.9CIMAW« konnte nicht angelegt werden: Datei oder Verzeichnis nicht gefunden The part in German says: Couldn't be created: File or directory not found.

  Read the article

• Ubiquity crashes when installing from CD

  - by Ashes

  I didn't want to take any risks so I ordered a CD from Canonical to get Ubuntu. Thing is, another CD was given to me about 2 days before the CD from Canonical got to me, so I installed Ubuntu 10.10 but there was a problem with the login screen (When the Ubuntu logo should be displayed, it wasn't, instead it would just say "Ubuntu 10.10") so I decided to reinstall Ubuntu 10.10 with the CD that arrived a few days later. Whenever it's finishing the installation, the installer (ubiquity) crashes, or sometimes it gets to the part where the boot loader should be installed and for some reason it is unable to install the boot loader (if I choose not to install it, I don't get how to start Ubuntu, since you have to reboot my laptop after the installation is over). I'm currently running Ubuntu 10.10 from the CD I ordered, since I have no other OS on this laptop.

  Read the article

• HDMI not working after installing ubuntu-gnome-desktop on Ubuntu 14.04

  - by Mauricio

  So, I installed ubuntu-gnome-desktop on ubuntu 14.04 and HDMI stopped working (not sure what else isn't working anymore, but HDMI is the most immediate thing I noticed). I also have kubuntu-desktop installed and HDMI doesn't work there either. So I ran xrandr and, as I feared, it doesn't detect HDMI anymore. HDMI worked fine before installing gnome, and it literally stopped working after the reboot right after the install. Any help? I've already removed ubuntu-gnome-desktop and rebooted to no avail. Many thanks!

  Read the article

• Cannot boot Ubuntu 12.04 on Lenovo V570 fresh install

  - by Jonathan

  I just did a fresh install of Kubuntu 64 bit 12.04 (from the DVD) to a Lenovo V570 laptop. I did a dual boot install with Windows 7. I used the boot layout leftover from Linux Mint 12 (which was working). The installation finished with what seemed to be a success. However, when rebooting, I get this error: GRUB: “invalid arch independent ELF magic” after install on SSD Then I did grub-install and update-grub (I didn't install grub-efi, so maybe this is the problem?) Then I got "unknown filesystem error" at the grub prompt. Desperately, I gave /boot the bootable flag. Then on a reboot,... I got some strange screen with the letters PXE. It flashed momentarily, too fast to read, and then the computer jumped to a screen which asked me from which drive was the boot desired to be. As of now, I have no idea what I am doing.

  Read the article

• Flash completely freeze computer

  - by Yanick Rochon

  Since this morning, and ever so frequently, Flash will completely freeze the computer as soon as something launches it. First, the web page will stop responding, then the entire browser, and after about 2 seconds, the mouse and keyboard will stop responding and the computer will escalate to 100% usage, and all that's left is to perform a hard reboot. I tried re-installing Flash, downgrade my kernel, nothing will do. I'm running Mint 13 64-bit (based on Ubuntu 12.04) with XFCE (not Xubuntu, I installed XFCE as separate package). It never freezes otherwise, so I know it's caused by Flash. How do I solve this issue? What could cause this?

  Read the article

• How can I disable usb-autosuspend for a specific device?

  - by black_puppydog

  This is related to the issue discussed in this question. Summary: the mouse freezes when operating on battery since it is autosuspended after a certain time and needs more time to wake up. Disabling usb-autosuspend for the mouse's receiver in powertop is a temporary solution but does not survive a reboot. How can I permanently disable the usb autosuspend for only one specific device? A solution that does not involve installing additional packages is preferred (after all, I want to disable something) but not required. Removing powertop (which seems to be a solution for some) is not what I want - I like poertop... And installing laptop-mode-tools to disable usb_autosuspend alltogether is not what I want, either, thus the new question. Also: will this affect the battery of my notebook? The logitech unifying receiver for the mouse stays connected all the time, so if that prevents the autosuspend from happening for all devices that would probably be bad.

  Read the article

• Computer Boot/Installation Failure

  - by Marcus

  I recently tried to insatll Kubuntu and it failed. It completely removed everything off of my HDD and there is no operating system. Everytime I try to install a Distro it fails during instillation. I got Ubuntu 13.04 to work but it required a reboot and after that it did not work. I tried to re-install Ubuntu but it failed. I have tried Ubuntu, Kubuntu, and Xubuntu and they all failed. With Kubuntu and Xubuntu I get an error saying, "The 'grub-efi-amd64-signed' package failed to install into /target/. Without the GRUB boot loader, the installed system will not boot". When I select try (distro) it loads up but the installation won't finish. I do not want to have to try the distro everytime I want to get on it. Any help?

  Read the article

• Problems with HP laptop

  - by Jan

  So the problem is...every time I reboot or shutdown laptop and when the laptop is booting again I get screen (before loading OS) that HP discovered overheating and system went into hibernate. But the point is that laptop is not overheating nor going into hibernate by itself. Also becouse of the hybrid graphic cards I cannot install additional drivers. Desktop resolution and all works perfectly but I cannot use unity 3D also openGL doesn't work as it should (with cairo docks) As i've read some posts, people say that switcheero doesn't work on 12.04 so I haven't tried it.

  Read the article

• Lenovo ThinkPad T400 and docking station

  - by harry

  Developer in me woke up this morning and asked me to fix this before Christmas. (As his Christmas gift). So, if I power on the laptop after docking it, everything works fine. But if I am working on it standalone and then try to dock it, I cannot get the display. Same way, if I undock it while working, I loose the display. Basically, I need to reboot for any docking/undocking dance to work. Questions: 1) What kind of information should I be looking for to understand the problem? 2) Where to find that information. After this, I can go and try to figure out what is going wrong.

  Read the article

• monitor screen dead.....not even shows bios screen

  - by megatronous

  Re: /host/ubuntu/disks/root.disk does not exist :( ALERT! /host/ubuntu/disks/root.siak does not exist. Dropping to a shell! BusyBox v1.15.3 (Ubuntu 1:1.15.3-1ubuntu5) built-in shell (ash) (initramfs) alll thought the above problem was solved my issue now is..when i booted my pc again after this solving this to solve the above problem i had pressed e in the grub menu then corrected the partition then after starting i did sudo grub-update then i made some automatic update updates then in next reboot......my screen had gone blank .... and i am not even able to see bios screen....in the start ...the monitior just stays blank..................i have even tried disconnectiong my hard disk but still not able to get the display......solution required ....urgently.....

  Read the article

• Install unetbootin on Ubuntu 12.04

  - by Matteo

  I'm trying to install UNetbootin on Ubuntu 12.04 LTS. I downloaded the executable file from this link and followed the instructions below: If using Linux, make the file executable (using either the command chmod +x ./unetbootin-linux, or going to Properties-Permissions and checking "Execute"), then start the application, you will be prompted for your password to grant the application administrative rights, then the main dialog will appear, where you select a distribution and install target (USB Drive or Hard Disk), then reboot when prompted.\ So I typed on my terminal sudo chmod +x unetbootin-linux-584 and tried to execute the binary file with ./unetbootin-linux-584 but got this output: ./unetbootin-linux-584: error while loading shared libraries: libXrandr.so.2: cannot open shared object file: No such file or directory However when I checked for libraries libXrandr on my system I actually found them $> locate libXrandr /usr/lib/x86_64-linux-gnu/libXrandr.so.2 /usr/lib/x86_64-linux-gnu/libXrandr.so.2.2.0 /usr/lib/x86_64-linux-gnu/libXrandr_ltsq.so.2 /usr/lib/x86_64-linux-gnu/libXrandr_ltsq.so.2.2.0 so I really don't have a clue of what's the problem and how can I fix it, any ideas?

  Read the article

• Problem mounting USB Mobile Broadband dongle in Ubuntu 13.04

  - by Still A Learner

  I have been using Ubuntu 13.04 since last two months and I have problem mounting my USB dongle. I have Lenovo G-580 series laptop. It has 3 USB ports which are 3.0. When I attach dongle to one of the three USB ports the device gets mounted immediately but in the other two ports I have to reboot the OS while the dongle is attached to the laptop in order to mount it and connect to the internet. My dongle is of ZTE. I don't get what is going wrong.

  Read the article

• Need Help Unable to Mount Location

  - by Don't ASk Ubun

  I am not able to start Windows and am using a DVD copy of Ubuntu to start up. I see my 750 GB Hard Disk, but if I click it i get this error: Error mounting: mount exited with exit code 13: ntfs_attr_pread_i: ntfs_pread failed: Input/output error Failed to read NTFS $Bitmap: Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details. After googling for a while I think I need to do sudo apt-get install ntfsprogs but when I try that: E: Package 'ntfsprogs' has no installation candidate My problem is a lot like this thread

  Read the article

• Why is the console hanging randomly?

  - by Josh M.

  Ubuntu 10.10 Server x64 installed as Virtual Box VM. Fresh install plus postgresql and tomcat6 installed via aptitude. Rebooted the server and now when I run some command the console hangs. For instance, I run "sudo shutdown now" and then nothing happens but I am not returned to the prompt. I hit CTRL+C and nothing happens except ^C appears on the following line. I can type whatever and it will show up inline. I switch to tty2 and try to login and I only get as far as [username][enter] and that console hangs. One other thing - after "sudo reboot" the console appears to hang (just like above) when shutting down tomcat6. Any idea what's going on or what I should check? Thanks!

  Read the article

• My ubuntu partition was deleted and I can't boot from either a DVD or USB

  - by ropudito

  It's my first time installing ubuntu. I have Windows 7 and 8 before in my laptop (Acer Aspire 4752z). After Ubuntu (12.04) installed in my laptop, the Windows boot loader didn't recognize my Ubuntu so I updated grub from a live USB. And after grub updated, Ubuntu was booting perfectly but my Windows wasn't listed in the grub menu. So I follow someone instruction to update grub again. And after reboot, the grub menu didn't show anymore. After searching about this problem on the net and trying to update grub again and again, I decided to delete the Ubuntu partition from live USB. And shortly after, I booted to Windows with Hiren boot and I used mbrfix. But i think it failed. Now i cant show my BIOS setup or boot from DVD or USB. After that, the only screen i can see after booting is: error: unknown filesystem grub rescue>

  Read the article

• A question about "add-apt-repository"(gcc 4.7 or bumblebee)

  - by girlkoo

  I install ubuntu 12.04 in my notebook and I use c++. I want to use c++11,so I want to upgrade my gcc to gcc4.7. I do like this: sudo add-apt-repository ppa:ubuntu-toolchain-r/test sudo apt-get update sudo apt-get install gcc-4.7 sudo apt-get install g++-4.7 but when I run "sudo apt-get install gcc-4.7", it just can find gcc-4.7-base not gcc-4.7, and when I run "sudo apt-get install g++-4.7", it can find nothing... Today, I want to install the "bumblebee" and do like this: sudo add-apt-repository ppa:bumblebee/stable sudo apt-get update sudo apt-get install bumblebee bumblebee-nvidia sudo reboot but when I run "sudo apt-get install bumblebee bumblebee-nvidia", it tells me the packages can't be find. The ways I methoded are specially use to ubuntu 12.04, the links is: Installing gcc 4.7 https://wiki.ubuntu.com/Bumblebee#Installation What can I do? Thank you!My email is [email protected]

  Read the article

• Wireless internet sharing stops working after client disconnects

  - by Mandy

  I'm running Unbuntu 11.10 with the latest service packs, sharing an ether connection over wireless. Everything works fine, up to the point that the client (a laptop) sleeps or otherwise disconnects. The wireless connection at that point no longer functions, not showing up when searching for the hotspot with the laptop. The only way to recover is to reboot the machine, or toggle the wireless share off/on. I've double checked the wireless card has power management off. Currently what I'm doing is keeping an Ipod plugged into the box 24/7 to keep the wireless connection up when the laptop disconnects. I've searched the internet far and wide, found many issues with wireless problems after an ubuntu box itself sleeps, but nothing directly related to my problem. Hoping someone has some idea of where to look and what to check. A girl needs her Ipod back!

  Read the article

• Installing Microsoft VX1000 webcam

  - by KRistian

  I found a tutorial with people saying it works; here are the instructions I followed. I opened a shell as root on my system and launched the following: wget http://linuxtv.org/hg/v4l-dvb/archive/tip.tar.gz tar zxvf tip.tar.gz cd v4l... (whatever the newly created directory name is) make all sudo make install Then I edited /etc/modprobe.d/blacklist-custom and added blacklist sn9c102. After reboot, I launched sudo gstreamer-properties. However when I type tar zxvf tip.tar.gz it displays: tar: You may not specify more than one `-Acdtrux' or `--test-label' option Try `tar --help' or `tar --usage' for more information. Why? How can I do this? Thanks in advance.

  Read the article

• Unable to recognize hard drive after replacing a drive

  - by Peter Schriver

  I have a Poweredge 830 that I had been using with 1 OS Sata drive and 3 data drives. One of the drives had some failing sectors so I replaced it with a different drive. For some bizarre reason the computer would not reboot so I disconnected all of the media drives and did a clean reinstall on the OS drive. Only the boot drive and one of the media drives are now recognized by my Bios. Drive 0 and 2. Drive 1 and 3 are listed in the Bios as "Unkown Device" Any help would be appreciated I think there may be something wrong with the install. For some reason when I attempt to change the display it says I have a laptop.If you think a reinstall is in order I will try that.

  Read the article

• Can't mount windows partition?

  - by C.J.

  When I try to open the Windows Partition from Ubuntu I receive the error: Unable to mount 55 GB Filesystem Error mounting: mount exited without exit code 13: ntfs_mst_post_read_fixup_warn: magic: 0x04010400 size: 1024 usa_ofs: 1026 usa_count: 1026: Invalid argument Record 6 has no FILE magic (0x4010400) Failed to open inode FILE_Bitmap: Input/output error Failed to mount '/dev/sda2': Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more detail. Additionally, I can't open the Windows Partition. I've tried updating it many times but it won't show up on GRUB. Does anybody know what all this means? And how I might fix it? I thank you for any help in advance

  Read the article

• Interface is too empty

  - by Nade Ali

  I have recently installed Ubuntu 12.04 0n my PC without any third-party software (cause i havent been able to get my dial-up to work). When i open Ubuntu after reboot, there is absolutely nothing on the desktop screen except for an 'Untitled' folder at the corner of the screen. There is no menu, no taskbars at the top whatever. I dont know why this is happening. The .iso from which i have booted amd installed Ubuntu is fine. I have already conducted an md5sum test and it was all fine. Looking forward to your response.

  Read the article

< Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >