Search Results

Search found 21392 results on 856 pages for 'audio output'.

Page 470/856 | < Previous Page | 466 467 468 469 470 471 472 473 474 475 476 477  | Next Page >

• Songbird looping my library playlist

  - by Logi

  I'm using Songbird (on Windows) as my iTunes replacement. There's two things that annoy me about Songbird: 1) It has a web browser built in. I can ignore this as I don't use it. But, seriously, a web browser? :/ 2) It loops my library. This, I don't like. The way I play my audio is by launching Windows Explorer, navigating to my media library and double clicking on a single MP3. I only want to hear that one MP3. I don't use the Media Import function in Songbird - Or any other media player. But it insists on adding every song I play to the Library. Disabling this would be excellent but, falling short of that, I'd at least like to stop it repeating every song in the library. When Songbird finishes playing the last song in the Library (which is the song I just opened via Windows Explorer (gets appended to the library)), it jumps to the top of the library and starts playing all the songs again. How can I stop this? Songbird is set to 'Repeat none'

  Read the article

• New SSD freezing on older motherboard (intel G31)

  - by DJM

  I have an ECS G31T-M motherboard running a Core2 Quad processor, 4gb RAM, Windows 7 32bit, Geforce 9600GT. Bought a Sandisk Extreme III 120GB (SDSSDX-120G-G25) and installed today. I'm outputting this from my 9600GT with included TV-out adapter to Component video (to my HDTV). This motherboard is SATA 2 and from what I can tell, SSDs run on the IDE controller and there is nothing fancy to set up advanced features of SSDs. I've noticed on other forums (but not verifying with ECS) this board does not support AHCI. I have two versions of Windows 7 installed on two drives, the SSD and an old 500G disc drive. When booted from my older 500G HDD, video plays fine on the HDTV. When booting the SSD windows 7 install, I am freezing constantly, as in, video plays OK for a minute, then picture freezes for 1-3 minutes (sometimes as audio continues playing) and returns for 20-30 seconds before doing the same thing again. Other tasks such as basic maneuvering through file folders seems to be no problem. Please help!! Do I need a new system for this thing to work, or could there be other fixes? I updated firmware to R201 to no avail. DJM

  Read the article

• Apple Service Diagnostic application on USB key?

  - by Matt 'Trouble' Esse

  I found the following in a text file, and I would like to use the Apple Service Diagnostic Application from a bootable USB key but I cannot find where to download it or set it up? Also is this free software or does it require a separate licence? It sounds like it would be a useful tool for diagnosing Mac problems. The Apple Service Diagnostic application is designed to run both EFI and Mac OS X tests from an external USB hard drive. Apple Service Diagnostic (EFI) runs low-level tests of the hardware directly and does not require Mac OS X, while Apple Service Diagnostic (OS) uses Mac OS X to run tests. Booting and Using the Apple Service Diagnostic Application - Before using Apple Service Diagnostic, disconnect any Ethernet network, USB, and audio cables. - With the USB hard drive containing ASD 3S123 plugged into a USB port, restart the computer and hold down the option key as the computer boots up into the Startup Manager. To run ASD (EFI) select the "ASD EFI 3S123" drive icon and press return or select it with a mouse click. To run ASD (OS) select the "ASD OS 3S123" drive icon and press return or select it with a mouse click. ASD (EFI) will load in 20-30 seconds; ASD (OS) will load in 2-3 minutes. - After running ASD (OS) or ASD (EFI), press the Restart button to restart the computer back into the normal startup volume, or hold down the option key to get back to the Startup Manager. ASD is no longer delivered as an image to be restored onto a DVD. ASD 3S117 and newer versions requires installation onto an external USB hard drive. For more information, please refer to the document "Installing ASD on a USB hard drive".

  Read the article

• Users loggin to 3Com switches authenticated by radius not getting admin priv and no access available

  - by 3D1L

  Hi, Following the setup that I have for my Cisco devices, I got some basic level of functionality authenticating users that loggin to 3Com switches authenticated against a RADIUS server. Problem is that I can not get the user to obtain admin privileges. I'm using Microsoft's IAS service. According to 3Com documentation when configuring the access policy on IAS the value of 010600000003 have to be used to specify admin access level. That value have to be input in the Dial-in profile section: 010600000003 - indicates admin privileges 010600000002 - manager 010600000001 - monitor 010600000000 - visitor Here is the configuration on the switch: radius scheme system server-type standard primary authentication XXX.XXX.XXX.XXX accounting optional key authentication XXXXXX key accounting XXXXXX domain system scheme radius-scheme system local-user admin service-type ssh telnet terminal level 3 local-user manager service-type ssh telnet terminal level 2 local-user monitor service-type ssh telnet terminal level 1 The configuration is working with the IAS server because I can check user login events with the Eventviewer tool. Here is the output of the DISPLAY RADIUS command at the switch: [4500]disp radius SchemeName =system Index=0 Type=standard Primary Auth IP =XXX.XXX.XXX.XXX Port=1645 State=active Primary Acct IP =127.0.0.1 Port=1646 State=active Second Auth IP =0.0.0.0 Port=1812 State=block Second Acct IP =0.0.0.0 Port=1813 State=block Auth Server Encryption Key= XXXXXX Acct Server Encryption Key= XXXXXX Accounting method = optional TimeOutValue(in second)=3 RetryTimes=3 RealtimeACCT(in minute)=12 Permitted send realtime PKT failed counts =5 Retry sending times of noresponse acct-stop-PKT =500 Quiet-interval(min) =5 Username format =without-domain Data flow unit =Byte Packet unit =1 Total 1 RADIUS scheme(s). 1 listed Here is the output of the DISPLAY DOMAIN and DISPLAY CONNECTION commands after users log into the switch: [4500]display domain 0 Domain = system State = Active RADIUS Scheme = system Access-limit = Disable Domain User Template: Idle-cut = Disable Self-service = Disable Messenger Time = Disable Default Domain Name: system Total 1 domain(s).1 listed. [4500]display connection Index=0 ,Username=admin@system IP=0.0.0.0 Index=2 ,Username=user@system IP=xxx.xxx.xxx.xxx On Unit 1:Total 2 connections matched, 2 listed. Total 2 connections matched, 2 listed. [4500] Here is the DISP RADIUS STATISTICS: [4500] %Apr 2 00:23:39:957 2000 4500 SHELL/5/LOGIN:- 1 - ecajigas(xxx.xxx.xxx.xxx) in un it1 logindisp radius stat state statistic(total=1048): DEAD=1046 AuthProc=0 AuthSucc=0 AcctStart=0 RLTSend=0 RLTWait=2 AcctStop=0 OnLine=2 Stop=0 StateErr=0 Received and Sent packets statistic: Unit 1........................................ Sent PKT total :4 Received PKT total:1 Resend Times Resend total 1 1 2 1 Total 2 RADIUS received packets statistic: Code= 2,Num=1 ,Err=0 Code= 3,Num=0 ,Err=0 Code= 5,Num=0 ,Err=0 Code=11,Num=0 ,Err=0 Running statistic: RADIUS received messages statistic: Normal auth request , Num=1 , Err=0 , Succ=1 EAP auth request , Num=0 , Err=0 , Succ=0 Account request , Num=1 , Err=0 , Succ=1 Account off request , Num=0 , Err=0 , Succ=0 PKT auth timeout , Num=0 , Err=0 , Succ=0 PKT acct_timeout , Num=3 , Err=1 , Succ=2 Realtime Account timer , Num=0 , Err=0 , Succ=0 PKT response , Num=1 , Err=0 , Succ=1 EAP reauth_request , Num=0 , Err=0 , Succ=0 PORTAL access , Num=0 , Err=0 , Succ=0 Update ack , Num=0 , Err=0 , Succ=0 PORTAL access ack , Num=0 , Err=0 , Succ=0 Session ctrl pkt , Num=0 , Err=0 , Succ=0 RADIUS sent messages statistic: Auth accept , Num=0 Auth reject , Num=0 EAP auth replying , Num=0 Account success , Num=0 Account failure , Num=0 Cut req , Num=0 RecError_MSG_sum:0 SndMSG_Fail_sum :0 Timer_Err :0 Alloc_Mem_Err :0 State Mismatch :0 Other_Error :0 No-response-acct-stop packet =0 Discarded No-response-acct-stop packet for buffer overflow =0 The other problem is that when the RADIUS server is not available I can not log in to the switch. The switch have 3 local accounts but none of them works. How can I specify the switch to use the local accounts in case that the RADIUS service is not available?

  Read the article

• Tablet as Car Computer

  - by luxurychair

  Okay, so forward this off to the right place if this isn't the right place to ask this question. I want to use a tablet computer as a car-computer. Minimum features would be to run my music (through iPod, Pandora, whatever I want) and GPS Navigation, watch TV or movies while I'm parked waiting for people, and the hard one: it needs to answer my phone calls with a pleasant interface much like in-dash systems do. It needs to detect that my phone is ringing in my pocket and provide an on-screen answer/ignore and then route the audio through the cars speakers. It would be nice to dial out and have address book access, but that is somewhat secondary. I have an iPhone myself and I figured that an iPad with 3G might make a good system for this - but I'm open to other options if an iPad can't do everything I need. I'm willing to write code, and I'm willing to jailbreak one or both devices. I haven't done much work in Obj-C, but I'm not opposed to learning a new language for this project. It's self enrichment for the most part, as I'm sure I can buy an indash entertainment system for less. Does anyone have experience with the iPhone/iPad SDK that can tell me whether or not it would be possible to get it an iPad to answer my calls in the car? What about an Android tablet? (that Adam looks promising, too).

  Read the article

• UFW as an active service on Ubuntu

  - by lamcro

  Every time I restart my computer, and check the status of the UFW firewall (sudo ufw status), it is disabled, even if I then enable and restart it. I tried putting sudo ufw enable as one of the startup applications but it asks for the sudo password every time I log on, and I'm guessing it does not protect anyone else who logs on my computer. How can I setup ufw so it is activated when I turn on my computer, and protects all accounts? Update I just tried /etc/init.d/ufw start, and it activated the firewall. Then I restarted the computer, and again it was disabled. content of /etc/ufw/ufw.conf # /etc/ufw/ufw.conf # # set to yes to start on boot ENABLED=yes # set to one of 'off', 'low', 'medium', 'high' LOGLEVEL=full content of /etc/default/ufw # /etc/default/ufw # # Set to yes to apply rules to support IPv6 (no means only IPv6 on loopback # accepted). You will need to 'disable' and then 'enable' the firewall for # the changes to take affect. IPV6=no # Set the default input policy to ACCEPT, ACCEPT_NO_TRACK, DROP, or REJECT. # ACCEPT enables connection tracking for NEW inbound packets on the INPUT # chain, whereas ACCEPT_NO_TRACK does not use connection tracking. Please note # that if you change this you will most likely want to adjust your rules. DEFAULT_INPUT_POLICY="DROP" # Set the default output policy to ACCEPT, ACCEPT_NO_TRACK, DROP, or REJECT. # ACCEPT enables connection tracking for NEW outbound packets on the OUTPUT # chain, whereas ACCEPT_NO_TRACK does not use connection tracking. Please note # that if you change this you will most likely want to adjust your rules. DEFAULT_OUTPUT_POLICY="ACCEPT" # Set the default forward policy to ACCEPT, DROP or REJECT. Please note that # if you change this you will most likely want to adjust your rules DEFAULT_FORWARD_POLICY="DROP" # Set the default application policy to ACCEPT, DROP, REJECT or SKIP. Please # note that setting this to ACCEPT may be a security risk. See 'man ufw' for # details DEFAULT_APPLICATION_POLICY="SKIP" # By default, ufw only touches its own chains. Set this to 'yes' to have ufw # manage the built-in chains too. Warning: setting this to 'yes' will break # non-ufw managed firewall rules MANAGE_BUILTINS=no # # IPT backend # # only enable if using iptables backend IPT_SYSCTL=/etc/ufw/sysctl.conf # extra connection tracking modules to load IPT_MODULES="nf_conntrack_ftp nf_nat_ftp nf_conntrack_irc nf_nat_irc" Update Followed your advise and ran update-rc.d with no luck. lester@mcgrath-pc:~$ sudo update-rc.d ufw defaults update-rc.d: warning: /etc/init.d/ufw missing LSB information update-rc.d: see <http://wiki.debian.org/LSBInitScripts> Adding system startup for /etc/init.d/ufw ... /etc/rc0.d/K20ufw -> ../init.d/ufw /etc/rc1.d/K20ufw -> ../init.d/ufw /etc/rc6.d/K20ufw -> ../init.d/ufw /etc/rc2.d/S20ufw -> ../init.d/ufw /etc/rc3.d/S20ufw -> ../init.d/ufw /etc/rc4.d/S20ufw -> ../init.d/ufw /etc/rc5.d/S20ufw -> ../init.d/ufw lester@mcgrath-pc:~$ ls -l /etc/rc?.d/*ufw lrwxrwxrwx 1 root root 13 2009-12-20 20:34 /etc/rc0.d/K20ufw -> ../init.d/ufw lrwxrwxrwx 1 root root 13 2009-12-20 20:34 /etc/rc1.d/K20ufw -> ../init.d/ufw lrwxrwxrwx 1 root root 13 2009-12-20 20:34 /etc/rc2.d/S20ufw -> ../init.d/ufw lrwxrwxrwx 1 root root 13 2009-12-20 20:34 /etc/rc3.d/S20ufw -> ../init.d/ufw lrwxrwxrwx 1 root root 13 2009-12-20 20:34 /etc/rc4.d/S20ufw -> ../init.d/ufw lrwxrwxrwx 1 root root 13 2009-12-20 20:34 /etc/rc5.d/S20ufw -> ../init.d/ufw lrwxrwxrwx 1 root root 13 2009-12-20 20:34 /etc/rc6.d/K20ufw -> ../init.d/ufw

  Read the article

• Nagios notifications definitions

  - by Colin

  I am trying to monitor a web server in such a way that I want to search for a particular string on a page via http. The command is defined in command.cfg as follows # 'check_http-mysite command definition' define command { command_name check_http-mysite command_line /usr/lib/nagios/plugins/check_http -H mysite.example.com -s "Some text" } # 'notify-host-by-sms' command definition define command { command_name notify-host-by-sms command_line /usr/bin/send_sms $CONTACTPAGER$ "Nagios - $NOTIFICATIONTYPE$ :Host$HOSTALIAS$ is $HOSTSTATE$ ($OUTPUT$)" } # 'notify-service-by-sms' command definition define command { command_name notify-service-by-sms command_line /usr/bin/send_sms $CONTACTPAGER$ "Nagios - $NOTIFICATIONTYPE$: $HOSTALIAS$/$SERVICEDESC$ is $SERVICESTATE$ ($OUTPUT$)" } Now if nagios doesn't find "Some text" on the home page mysite.example.com, nagios should notify a contact via sms through the Clickatell http API which I have a script for that that I have tested and found that it works fine. Whenever I change the command definition to search for a string which is not on the page, and restart nagios, I can see on the web interface that the string was not found. What I don't understand is why isn't the notification sent though I have defined the host, hostgroup, contact, contactgroup and service and so forth. What I'm I missing, these are my definitions, In my web access through the cgi I can see that I have notifications have been defined and enabled though I don't get both email and sms notifications during hard status changes. host.cfg define host { use generic-host host_name HAL alias IBM-1 address xxx.xxx.xxx.xxx check_command check_http-mysite } *hostgroups_nagios2.cfg* # my website define hostgroup{ hostgroup_name my-servers alias All My Servers members HAL } *contacts_nagios2.cfg* define contact { contact_name colin alias Colin Y service_notification_period 24x7 host_notification_period 24x7 service_notification_options w,u,c,r,f,s host_notification_options d,u,r,f,s service_notification_commands notify-service-by-email,notify-service-by-sms host_notification_commands notify-host-by-email,notify-host-by-sms email [email protected] pager +254xxxxxxxxx } define contactgroup{ contactgroup_name site_admin alias Site Administrator members colin } *services_nagios2.cfg* # check for particular string in page via http define service { hostgroup_name my-servers service_description STRING CHECK check_command check_http-mysite use generic-service notification_interval 0 ; set > 0 if you want to be renotified contacts colin contact_groups site_admin } Could someone please tell me where I'm going wrong. Here are the generic-host and generic-service definitions *generic-service_nagios2.cfg* # generic service template definition define service{ name generic-service ; The 'name' of this service template active_checks_enabled 1 ; Active service checks are enabled passive_checks_enabled 1 ; Passive service checks are enabled/accepted parallelize_check 1 ; Active service checks should be parallelized (disabling this can lead to major performance problems) obsess_over_service 1 ; We should obsess over this service (if necessary) check_freshness 0 ; Default is to NOT check service 'freshness' notifications_enabled 1 ; Service notifications are enabled event_handler_enabled 1 ; Service event handler is enabled flap_detection_enabled 1 ; Flap detection is enabled failure_prediction_enabled 1 ; Failure prediction is enabled process_perf_data 1 ; Process performance data retain_status_information 1 ; Retain status information across program restarts retain_nonstatus_information 1 ; Retain non-status information across program restarts notification_interval 0 ; Only send notifications on status change by default. is_volatile 0 check_period 24x7 normal_check_interval 5 retry_check_interval 1 max_check_attempts 4 notification_period 24x7 notification_options w,u,c,r contact_groups site_admin register 0 ; DONT REGISTER THIS DEFINITION - ITS NOT A REAL SERVICE, JUST A TEMPLATE! } *generic-host_nagios2.cfg* define host{ name generic-host ; The name of this host template notifications_enabled 1 ; Host notifications are enabled event_handler_enabled 1 ; Host event handler is enabled flap_detection_enabled 1 ; Flap detection is enabled failure_prediction_enabled 1 ; Failure prediction is enabled process_perf_data 1 ; Process performance data retain_status_information 1 ; Retain status information across program restarts retain_nonstatus_information 1 ; Retain non-status information across program restarts max_check_attempts 10 notification_interval 0 notification_period 24x7 notification_options d,u,r contact_groups site_admin register 1 ; DONT REGISTER THIS DEFINITION - ITS NOT A REAL HOST, JUST A TEMPLATE! }

  Read the article

• Suspected Router problems, [closed]

  - by jordon_user

  I am new to this forum. I appreciate any help you can offer. I have been troubleshooting an error with both my WIRED Internet Connection I have 3 desktops running through this working connection (Router) with no problems. Two computers, one laptop and desktop experience the issue. If I connect directly to the Modem, on either, no problem on the internet. Through the Router, my computer connects for a period of time but if ever awaking my comp, or restarting, the yellow explanation mark returns. The only way I can get the connection up = cmd. ipconfig /release, ipconfig /renew. This constant command is annoying and was hoping for a permanent fix. Audio is also not working. I know its likely a driver error, but its an old comp we put together and if there's an easy fix itd be great to hear from you! If you need any more info just let me know. Thanks! THanks guys!

  Read the article

• What service do you use for music on hold?

  - by Russ Warren

  This may not be a sysadmin question for some, but it is definitely a hurdle I have to jump as the sysadmin for my company. We recently rolled-out a company wide VoiP system (Switchvox, to be exact) that has come preloaded with some royalty-free music on hold. Our customers have been complaining that the music on hold sounds like "funeral music." This may be the case (although I wouldn't want it played at my funeral), but it is all we have and we aren't willing to be sued over using music that isn't properly licensed. So, that brings me to the question asked in the title -- what and/or how do you provide decent music on hold? I'm assuming many people here use a PBX that allows customized music, so this has to apply to many of you. We've been looking at some sites that allow you to download royalty-free music for a one-time fee, but the music seems...lame. Something like a one-year subscription from ibaudio.com seems to be the best bet so far. Have you been able to discover something a little more mainstream for a decent licensing fee? Thank you. EDIT: Our PBX allows the playback of MP3 and OGG files, but does not allow streaming of a live audio source, Internet-based or otherwise. It also does not allow the use of a "line-in" source such as a CD player or radio. Don't let this stop you from sharing your setup, though. I'm interested in hearing what everyone uses!

  Read the article

• Centos/OVH: public IP on KVM virtual machine

  - by Sébastien

  Since a few days, I'm trying to configure my KVM vm to have a public IP address, without any success. First, I'm on OVH, and you need to know they don't allow networking from different mac addresses. I have so registered a virtual mac address associated with my failover IP Here's my configuration: Guest wanted IP: 46.105.40.x Host IP: 176.31.240.x Host configuration dummy0 interface: ifcfg-dummy0 BOOTPROTO=static IPADDR=10.0.0.1 NETMASK=255.0.0.0 ONBOOT=yes NM_CONTROLLED=no ARP=yes BRIDGE=br0 br0 bridge: ifcfg-br0 DEVICE=br0 TYPE=Bridge DELAY=0 ONBOOT=yes BOOTPROTO=static IPADDR=192.168.1.1 NETMASK=255.255.255.0 PEERDNS=yes NM_CONTROLLED=no ARP=yes Failover ip is redirected to the br0 bridge with ip route add 46.105.40.xxx dev br0 > cat /proc/sys/net/ipv4/ip_forward 1 > cat /proc/sys/net/ipv4/conf/vnet0/proxy_arp 1 > route -n Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 176.31.240.254 0.0.0.0 UG 0 0 0 eth0 46.105.40.x 0.0.0.0 255.255.255.255 UH 0 0 0 br0 176.31.240.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 Guest configuration: KVM: <interface type='bridge'> <mac address='02:00:00:30:22:05'/> <source bridge='br0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> </interface> I've borrowed most of the OVH configuration here (in french, http://guides.ovh.com/BridgeClient) for the guest configuration eth0 interface: ifcfg-eth0 DEVICE="eth0" BOOTPROTO=none HWADDR="02:00:00:30:22:05" NM_CONTROLLED="yes" ONBOOT="yes" TYPE="Ethernet" UUID="e9138469-0d81-4ee6-b5ab-de0d7d17d1c8" USERCTL=no PEERDNS=yes IPADDR=46.105.40.xxx NETMASK=255.255.255.255 GATEWAY=176.31.240.254 ARP=yes For the routes, I have in route-eth0: 176.31.240.254 dev eth0 default via 176.31.240.254 dev eth0 With this configuration, I don't have any access to the internet. The only thing I can do is to ping the public ip of the host, nothing more. My final conclusion is that the route does not work, because, when, on the guest, I run ping 8.8.8.8, I have, on the host: > tcpdump -i vnet0 icmp tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on br0, link-type EN10MB (Ethernet), capture size 65535 bytes 13:38:09.009324 IP 46-105-40-xxx.kimsufi.com > google-public-dns-a.google.com: ICMP echo request, id 50183, seq 1, length 64 13:38:09.815344 IP 46-105-40-xxx.kimsufi.com > google-public-dns-a.google.com: ICMP echo request, id 50183, seq 2, length 64 I never get the ping reply, only the request. It seems Guest - Host communication is fine. On eth0: > tcpdump -i eth0 icmp tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes 13:39:40.240561 IP 46-105-40-xxx.kimsufi.com > google-public-dns-a.google.com: ICMP echo request, id 50439, seq 1, length 64 13:39:40.250161 IP google-public-dns-a.google.com > 46-105-40-xxx.kimsufi.com: ICMP echo reply, id 50439, seq 1, length 64 I have the request and the reply on eth0, but reply is not forwarded to the bridge. I really don't understand why, I though it was the aim of the route to do that! IPtables is disabled on both host and guest. I really hope some of you will be able to help me! Many thanks in advance, Sébastien

  Read the article

• http request via iptables --to-destination ip redirect results in no response

  - by Wouter Vegter

  I have two Ubuntu servers with each having their own ip addresses. Let's call them server1 and server2, having respectively ip 1.1.1.1 and 2.2.2.2 I have a nginx running on server2. The sole purpose I want server1 to have is to redirect all incoming http (so port 80) requests to server2 without clients noticing that their request is being redirected. I tried the following command on server1: iptables -t nat -A PREROUTING -p tcp --dport 80 -j DNAT --to-destination 2.2.2.2 But when I enter 1.1.1.1 in my browser I get no respond: the page keeps trying to load without giving any message or error message (I get a time-out after 2-3 mins). But when I do remove the above iptables rule I immediately do get a "page not found error" when I enter 1.1.1.1 in my browser; so something is working but not as it should: when I enter 1.1.1.1 I want the html page to load that is hosted on 2.2.2.2 Because when i enter 2.2.2.2 in my browser I do see the webpage loaded. Could anyone please help me with this? I am searching quite some time (on severfault & Google) on this now so that's why I ask. Many thanks for reading my question! Update: Thank you all for you information. Unfortunately I still get no response I have the following iptables configuration: root@ip-10-48-238-216:/home/ubuntu# sudo iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination root@ip-10-48-238-216:/home/ubuntu# sudo iptables -t nat -L Chain PREROUTING (policy ACCEPT) target prot opt source destination DNAT tcp -- anywhere anywhere tcp dpt:www to:2.2.2.2 Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain POSTROUTING (policy ACCEPT) target prot opt source destination When i run tcpdump and do request via chrome to 1.1.1.1 i get the following root@ip-10-48-238-216:/home/ubuntu# sudo tcpdump -i eth0 port 80 -vv tcpdump: listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes 13:56:18.346625 IP (tos 0x0, ttl 52, id 12055, offset 0, flags [DF], proto TCP (6), length 60) 212-123-161-112.ip.telfort.nl.16386 ip-10-48-238-216.eu-west-1.compute.internal.www: Flags [S], cksum 0xb398 (correct), seq 2639758575, win 5840, options [mss 1460,sackOK,TS val 1223672 ecr 0,nop,wscale 6], length 0 13:56:18.346662 IP (tos 0x0, ttl 51, id 12055, offset 0, flags [DF], proto TCP (6), length 60) 212-123-161-112.ip.telfort.nl.16386 ww1dc1.shopreme.com.www: Flags [S], cksum 0x9ee0 (correct), seq 2639758575, win 5840, options [mss 1460,sackOK,TS val 1223672 ecr 0,nop,wscale 6], length 0 13:56:18.598747 IP (tos 0x0, ttl 52, id 10138, offset 0, flags [DF], proto TCP (6), length 60) 212-123-161-112.ip.telfort.nl.16387 ip-10-48-238-216.eu-west-1.compute.internal.www: Flags [S], cksum 0xac40 (correct), seq 2645658541, win 5840, options [mss 1460,sackOK,TS val 1223735 ecr 0,nop,wscale 6], length 0 13:56:18.598777 IP (tos 0x0, ttl 51, id 10138, offset 0, flags [DF], proto TCP (6), length 60) 212-123-161-112.ip.telfort.nl.16387 ww1dc1.shopreme.com.www: Flags [S], cksum 0x9788 (correct), seq 2645658541, win 5840, options [mss 1460,sackOK,TS val 1223735 ecr 0,nop,wscale 6], length 0 ^C 4 packets captured 4 packets received by filter 0 packets dropped by kernel the mentioned address relate to the following 212-123-161-112.ip.telfort.nl.16386 : my personal computer ww1dc1.shopreme.com.www : dns of server2 (2.2.2.2) ip-10-48-238-216.eu-west-1.compute.internal.www : amazon web services ec2 internal address of server1 (1.1.1.1) However, the tcpdump log on server2 (2.2.2.2) stays empty and I get no response back in my browser. I am able to ping from server1 to server2. And net.ipv4.ip_forward is set to 1 and so is /proc/sys/net/ipv4/ip_forward Could there be anything else that is missing?

  Read the article

• Driver issue for 7850 HD Diamond Windows 7

  - by Mr.Student

  I have an issue with windows 7 implementing the drivers ati provides for my 7850 HD Diamond video card. The video card is plugged in correctly to the PCIE 2.0 slots of my motherboard (p6t asus) with more then enough power. Fortunately the card works as I have my monitor plugged into the card itself and I can see just fine. However windows 7 does not replace the standard vga default microsoft driver with catalyst drivers that I've tried installing from online as well as the CD. Every time I install the drivers using Catalyst Install manager it always finishes with "Install complete(Warnings occured)". I then see the warnings it has which it instead reports that it successfully installed the SDK, Catalyst Install Manager, and HDMI/AUDIO packages. When I check my device manager after that, the display adapter still shows as standard vga and that its still using microsoft default display adapter. Now this current card is replacing an old card of mine which is the ATI 4890 HD which works beautifully. In fact for the old card to work, all I need to do is go to device manager and right click on standard vga - click update driver and windows 7 magically finds the correct driver to install and everything is good. Not so with the new card. I've even went into my regedits and uninstalled every bit of ati driver software before reinstalling my new card. Nothing's worked thus far. I've already exchanged my card out once and talked to customer support from my motherboard, microsoft, and ati all blaming the other. Please help me out!!

  Read the article

• SPDIF passthrough not working in Windows 7

  - by adriangrigore

  Hi, I'm running Windows 7 on a computer with an Audigy Platinum eX sound card connected to a surround receiver via optical cabling. Sound works fine when listening to non-surround audio sources, such as windows sounds or MP3. However, when I view a DVD in Media Center and the SPDIF passthrough kicks in, I can only hear an awful noise instead of the movie soundtrack. Also, the receiver does not show the Dolby Digital or DTS symbol, but stays at Dolby Prologic, so it seems it doesn't identify the sound encoding properly. I could switch off SPDIF passthrough and use the sound card's decoder instead, but that's not an option for me since it would create more problems with regular MP3 playback via additional Stereo Receiver which is also connected to the same sound card. I've tried both the default Audigy drivers that come with Windows 7 and the latest drivers from the Soundblaster website, but the problem remains unchanged. Also, I have ensured that the receiver's Dolby Digital decoder is not broken by successfully connecting it to my PS3 to view a Dolby Digital DVD. Besides, SPDIF passthrough was working fine in Vista before I upgraded to Windows 7. Is there anything else I could try?

  Read the article

• iOrgSoft Video Converter for Mac

  - by terryhao

  [url=http://www.iorgsoft.com/Video-Converter-for-Mac/]video converter for mac[/url] IOrgSoft[url=http://www.iorgsoft.com/Video-Converter-for-Mac/]video converter for mac[/url] is an excellent video converting and editing software for Macintosh users. A built-in powerful video player, trimming, splitter/joiner/merger tools give you everything you need to manage your videos on mac. This mac converter supports many video formats like AVI, MP4, WMV, MPEG-1,2, YouTube(FLV), Limewire, Realplayer(RM,RMVB), Quicktime(MOV), MKV, MOD, TOD, ASF, 3GP, 3G2, AVCHD/M2TS/MTS/TS/TRP/TS, MXF, etc. Video Converter for Mac features a very clean user interface which makes this task a breeze. You can trim/clip any segments and optionally merge/join and sort them to create your personal movie, crop frame size to remove any unwanted area in the frame just like a pair of smart scissors and set the output video parameters such as video resolution, video frame rate, audio codec, video codec and video quality. Converted videos can be imported into imovie/itunes/FCE/FCP/QuickTime Pro or played on iPad, iPod touch, iPod classic, iPod nano, iPhone, iPhone 3GS, Apple TV, PSP, PS3, Creative Zen, iRiver PMP, Archos, mobile phones and other MP4/MP3 players. Video Converter for Mac makes video conversion easy. Free download now and have a try for yourself! [url=http://www.iorgsoft.com/Video-Editor-for-Mac/]Video Editor for Mac[/url] [url=http://www.iorgsoft.com/Mod-Converter/]mod converter[/url] [url=http://www.iorgsoft.com/Mod-Converter-for-Mac/]mod converter for mac[/url]

  Read the article

• 2 drives, slow software RAID1 (md)

  - by bart613

  Hello, I've got a server from hetzner.de (EQ4) with 2* SAMSUNG HD753LJ drives (750G 32MB cache). OS is CentOS 5 (x86_64). Drives are combined together into two RAID1 partitions: /dev/md0 which is 512MB big and has only /boot partitions /dev/md1 which is over 700GB big and is one big LVM which hosts other partitions Now, I've been running some benchmarks and it seems like even though exactly the same drives, speed differs a bit on each of them. # hdparm -tT /dev/sda /dev/sda: Timing cached reads: 25612 MB in 1.99 seconds = 12860.70 MB/sec Timing buffered disk reads: 352 MB in 3.01 seconds = 116.80 MB/sec # hdparm -tT /dev/sdb /dev/sdb: Timing cached reads: 25524 MB in 1.99 seconds = 12815.99 MB/sec Timing buffered disk reads: 342 MB in 3.01 seconds = 113.64 MB/sec Also, when I run eg. pgbench which is stressing IO quite heavily, I can see following from iostat output: Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 0.00 231.40 0.00 298.00 0.00 9683.20 32.49 0.17 0.58 0.34 10.24 sda1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 sda2 0.00 231.40 0.00 298.00 0.00 9683.20 32.49 0.17 0.58 0.34 10.24 sdb 0.00 231.40 0.00 301.80 0.00 9740.80 32.28 14.19 51.17 3.10 93.68 sdb1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 sdb2 0.00 231.40 0.00 301.80 0.00 9740.80 32.28 14.19 51.17 3.10 93.68 md1 0.00 0.00 0.00 529.60 0.00 9692.80 18.30 0.00 0.00 0.00 0.00 md0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 dm-0 0.00 0.00 0.00 0.60 0.00 4.80 8.00 0.00 0.00 0.00 0.00 dm-1 0.00 0.00 0.00 529.00 0.00 9688.00 18.31 24.51 49.91 1.81 95.92 Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 0.00 152.40 0.00 330.60 0.00 5176.00 15.66 0.19 0.57 0.19 6.24 sda1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 sda2 0.00 152.40 0.00 330.60 0.00 5176.00 15.66 0.19 0.57 0.19 6.24 sdb 0.00 152.40 0.00 326.20 0.00 5118.40 15.69 19.96 55.36 3.01 98.16 sdb1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 sdb2 0.00 152.40 0.00 326.20 0.00 5118.40 15.69 19.96 55.36 3.01 98.16 md1 0.00 0.00 0.00 482.80 0.00 5166.40 10.70 0.00 0.00 0.00 0.00 md0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 dm-0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 dm-1 0.00 0.00 0.00 482.80 0.00 5166.40 10.70 30.19 56.92 2.05 99.04 Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 0.00 181.64 0.00 324.55 0.00 5445.11 16.78 0.15 0.45 0.21 6.87 sda1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 sda2 0.00 181.64 0.00 324.55 0.00 5445.11 16.78 0.15 0.45 0.21 6.87 sdb 0.00 181.84 0.00 328.54 0.00 5493.01 16.72 18.34 61.57 3.01 99.00 sdb1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 sdb2 0.00 181.84 0.00 328.54 0.00 5493.01 16.72 18.34 61.57 3.01 99.00 md1 0.00 0.00 0.00 506.39 0.00 5477.05 10.82 0.00 0.00 0.00 0.00 md0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 dm-0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 dm-1 0.00 0.00 0.00 506.39 0.00 5477.05 10.82 28.77 62.15 1.96 99.00 And this is completely getting me confused. How come two exactly the same specced drives have such a difference in write speed (see util%)? I haven't really paid attention to those speeds before, so perhaps that something normal -- if someone could confirm I would be really grateful. Otherwise, if someone have seen such behavior again or knows what is causing such behavior I would really appreciate answer. I'll also add that both "smartctl -a" and "hdparm -I" output are exactly the same and are not indicating any hardware problems. The slower drive was changed already two times (to new ones). Also I asked to change the drives with places, and then sda were slower and sdb quicker (so the slow one was the same drive). SATA cables were changed two times already.

  Read the article

• Degraded RAID5 and no md superblock on one of remaining drive

  - by ark1214

  This is actually on a QNAP TS-509 NAS. The RAID is basically a Linux RAID. The NAS was configured with RAID 5 with 5 drives (/md0 with /dev/sd[abcde]3). At some point, /dev/sde failed and drive was replaced. While rebuilding (and not completed), the NAS rebooted itself and /dev/sdc dropped out of the array. Now the array can't start because essentially 2 drives have dropped out. I disconnected /dev/sde and hoped that /md0 can resume in degraded mode, but no luck.. Further investigation shows that /dev/sdc3 has no md superblock. The data should be good since the array was unable to assemble after /dev/sdc dropped off. All the searches I done showed how to reassemble the array assuming 1 bad drive. But I think I just need to restore the superblock on /dev/sdc3 and that should bring the array up to a degraded mode which will allow me to backup data and then proceed with rebuilding with adding /dev/sde. Any help would be greatly appreciated. mdstat does not show /dev/md0 # cat /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] [multipath] md5 : active raid1 sdd2[2](S) sdc2[3](S) sdb2[1] sda2[0] 530048 blocks [2/2] [UU] md13 : active raid1 sdd4[3] sdc4[2] sdb4[1] sda4[0] 458880 blocks [5/4] [UUUU_] bitmap: 40/57 pages [160KB], 4KB chunk md9 : active raid1 sdd1[3] sdc1[2] sdb1[1] sda1[0] 530048 blocks [5/4] [UUUU_] bitmap: 33/65 pages [132KB], 4KB chunk mdadm show /dev/md0 is still there # mdadm --examine --scan ARRAY /dev/md9 level=raid1 num-devices=5 UUID=271bf0f7:faf1f2c2:967631a4:3c0fa888 ARRAY /dev/md5 level=raid1 num-devices=2 UUID=0d75de26:0759d153:5524b8ea:86a3ee0d spares=2 ARRAY /dev/md0 level=raid5 num-devices=5 UUID=ce3e369b:4ff9ddd2:3639798a:e3889841 ARRAY /dev/md13 level=raid1 num-devices=5 UUID=7384c159:ea48a152:a1cdc8f2:c8d79a9c With /dev/sde removed, here is the mdadm examine output showing sdc3 has no md superblock # mdadm --examine /dev/sda3 /dev/sda3: Magic : a92b4efc Version : 00.90.00 UUID : ce3e369b:4ff9ddd2:3639798a:e3889841 Creation Time : Sat Dec 8 15:01:19 2012 Raid Level : raid5 Used Dev Size : 1463569600 (1395.77 GiB 1498.70 GB) Array Size : 5854278400 (5583.08 GiB 5994.78 GB) Raid Devices : 5 Total Devices : 4 Preferred Minor : 0 Update Time : Sat Dec 8 15:06:17 2012 State : active Active Devices : 4 Working Devices : 4 Failed Devices : 1 Spare Devices : 0 Checksum : d9e9ff0e - correct Events : 0.394 Layout : left-symmetric Chunk Size : 64K Number Major Minor RaidDevice State this 0 8 3 0 active sync /dev/sda3 0 0 8 3 0 active sync /dev/sda3 1 1 8 19 1 active sync /dev/sdb3 2 2 8 35 2 active sync /dev/sdc3 3 3 8 51 3 active sync /dev/sdd3 4 4 0 0 4 faulty removed [~] # mdadm --examine /dev/sdb3 /dev/sdb3: Magic : a92b4efc Version : 00.90.00 UUID : ce3e369b:4ff9ddd2:3639798a:e3889841 Creation Time : Sat Dec 8 15:01:19 2012 Raid Level : raid5 Used Dev Size : 1463569600 (1395.77 GiB 1498.70 GB) Array Size : 5854278400 (5583.08 GiB 5994.78 GB) Raid Devices : 5 Total Devices : 4 Preferred Minor : 0 Update Time : Sat Dec 8 15:06:17 2012 State : active Active Devices : 4 Working Devices : 4 Failed Devices : 1 Spare Devices : 0 Checksum : d9e9ff20 - correct Events : 0.394 Layout : left-symmetric Chunk Size : 64K Number Major Minor RaidDevice State this 1 8 19 1 active sync /dev/sdb3 0 0 8 3 0 active sync /dev/sda3 1 1 8 19 1 active sync /dev/sdb3 2 2 8 35 2 active sync /dev/sdc3 3 3 8 51 3 active sync /dev/sdd3 4 4 0 0 4 faulty removed [~] # mdadm --examine /dev/sdc3 mdadm: No md superblock detected on /dev/sdc3. [~] # mdadm --examine /dev/sdd3 /dev/sdd3: Magic : a92b4efc Version : 00.90.00 UUID : ce3e369b:4ff9ddd2:3639798a:e3889841 Creation Time : Sat Dec 8 15:01:19 2012 Raid Level : raid5 Used Dev Size : 1463569600 (1395.77 GiB 1498.70 GB) Array Size : 5854278400 (5583.08 GiB 5994.78 GB) Raid Devices : 5 Total Devices : 4 Preferred Minor : 0 Update Time : Sat Dec 8 15:06:17 2012 State : active Active Devices : 4 Working Devices : 4 Failed Devices : 1 Spare Devices : 0 Checksum : d9e9ff44 - correct Events : 0.394 Layout : left-symmetric Chunk Size : 64K Number Major Minor RaidDevice State this 3 8 51 3 active sync /dev/sdd3 0 0 8 3 0 active sync /dev/sda3 1 1 8 19 1 active sync /dev/sdb3 2 2 8 35 2 active sync /dev/sdc3 3 3 8 51 3 active sync /dev/sdd3 4 4 0 0 4 faulty removed fdisk output shows /dev/sdc3 partition is still there. [~] # fdisk -l Disk /dev/sdx: 128 MB, 128057344 bytes 8 heads, 32 sectors/track, 977 cylinders Units = cylinders of 256 * 512 = 131072 bytes Device Boot Start End Blocks Id System /dev/sdx1 1 8 1008 83 Linux /dev/sdx2 9 440 55296 83 Linux /dev/sdx3 441 872 55296 83 Linux /dev/sdx4 873 977 13440 5 Extended /dev/sdx5 873 913 5232 83 Linux /dev/sdx6 914 977 8176 83 Linux Disk /dev/sda: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 66 530113+ 83 Linux /dev/sda2 67 132 530145 82 Linux swap / Solaris /dev/sda3 133 182338 1463569695 83 Linux /dev/sda4 182339 182400 498015 83 Linux Disk /dev/sda4: 469 MB, 469893120 bytes 2 heads, 4 sectors/track, 114720 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk /dev/sda4 doesn't contain a valid partition table Disk /dev/sdb: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdb1 * 1 66 530113+ 83 Linux /dev/sdb2 67 132 530145 82 Linux swap / Solaris /dev/sdb3 133 182338 1463569695 83 Linux /dev/sdb4 182339 182400 498015 83 Linux Disk /dev/sdc: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdc1 1 66 530125 83 Linux /dev/sdc2 67 132 530142 83 Linux /dev/sdc3 133 182338 1463569693 83 Linux /dev/sdc4 182339 182400 498012 83 Linux Disk /dev/sdd: 2000.3 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdd1 1 66 530125 83 Linux /dev/sdd2 67 132 530142 83 Linux /dev/sdd3 133 243138 1951945693 83 Linux /dev/sdd4 243139 243200 498012 83 Linux Disk /dev/md9: 542 MB, 542769152 bytes 2 heads, 4 sectors/track, 132512 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk /dev/md9 doesn't contain a valid partition table Disk /dev/md5: 542 MB, 542769152 bytes 2 heads, 4 sectors/track, 132512 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk /dev/md5 doesn't contain a valid partition table

  Read the article

• URL sniffer/downloader

  - by Ricket

  Some websites have Flash content that plays music or videos. Most of the time they don't show you the URL of these music or videos, but for example, you can sniff a YouTube webpage and find the flv file that YouTube is actually requesting and playing. Right now I'm using Orbit Downloader, which has a feature called Grab++ that does just this; you start it, and then you refresh the page, and it shows you all files of certain types (image, audio, video) that the webpage requests, and then you can select one or more and download and it downloads them. But, I don't like Orbit, it installs plugins and has the whole download manager thing which I don't really want. What is a good alternative program? I'm not looking for websites like kickyoutube.com, I want a URL sniffer I guess. HTTPGuideDog used to be my Firefox add-on that did exactly this, but it hasn't been updated even to FF3 (and yes I know I can hack it to load anyway, I'm looking for something natively available preferably). I vaguely know of WireShark but last time I used it, I believe it captures individual packets, which is a little too fine-tuned for me. I just want to be able to see what's happening, and download something that the webpage downloaded. Oh, and I'm using Windows 7. Linux probably has some fancy command-line tool, but it just won't cut it for me. :-\ Edit: Oh, and something free please. Feel free to mention paid solutions though.

  Read the article

• ASUS EAH5450 Graphics Card (ATI Radeon HD5450 - 1 GB DDR3) on Windows 2003? Anybody got it to work?

  - by JJarava

  Hi all! I've just bought an ASUS EAH5450 Graphics Card (ATI Radeon HD5450, 1 GB DDR3) for my main system, but I haven't been able to make it work under Windows 2003 (my OS in that system). When I plugged the card, I got a couple of "installing drivers" prompt for things such as "ATI High Definition Audio Device" that got themselves sorted out of the Internet, and then a "Standard VGA Graphics Adapter". The CD that came with the card installs something called "ATI Catalyst Install Manager" and .net 2.0, but no drivers. I've downloaded the latest (WinXP 32bits) drivers from ATI, and the experience is the same: I don't get any drivers installed. My Motherboard is an ASUS A8N-SLI with nVidia nForce 4 chipset (for an Athlon 64X2, somewhat old), but my previous card was an ATi Radeon X700, so it's been working with ATI cards before. On POST, during boot I see a "Display Card" Device (Vendor ID 1002-68F9-0300) and a "Multimedia Device" (1002-AA68-0403), and when viewing the properties of the "Standard VGA", they match the device ID. Any hints? I'd really hate having to get rid of the card, and I'm sure it's not that strange what I'm trying to do...

  Read the article

• Since upgrading to Solaris 11, my ARC size has consistently targeted 119MB, despite having 30GB RAM. What? Why?

  - by growse

  I ran a NAS/SAN box on Solaris 11 Express before Solaris 11 was released. The box is an HP X1600 with an attached D2700. In all, 12x 1TB 7200 SATA disks, 12x 300GB 10k SAS disks in separate zpools. Total RAM is 30GB. Services provided are CIFS, NFS and iSCSI. All was well, and I had a ZFS memory usage graph looking like this: A fairly healthy Arc size of around 23GB - making use of the available memory for caching. However, I then upgraded to Solaris 11 when that came out. Now, my graph looks like this: Partial output of arc_summary.pl is: System Memory: Physical RAM: 30701 MB Free Memory : 26719 MB LotsFree: 479 MB ZFS Tunables (/etc/system): ARC Size: Current Size: 915 MB (arcsize) Target Size (Adaptive): 119 MB (c) Min Size (Hard Limit): 64 MB (zfs_arc_min) Max Size (Hard Limit): 29677 MB (zfs_arc_max) It's targetting 119MB while sitting at 915MB. It's got 30GB to play with. Why? Did they change something? Edit To clarify, arc_summary.pl is Ben Rockwood's, and the relevent lines generating the above stats are: my $mru_size = ${Kstat}->{zfs}->{0}->{arcstats}->{p}; my $target_size = ${Kstat}->{zfs}->{0}->{arcstats}->{c}; my $arc_min_size = ${Kstat}->{zfs}->{0}->{arcstats}->{c_min}; my $arc_max_size = ${Kstat}->{zfs}->{0}->{arcstats}->{c_max}; my $arc_size = ${Kstat}->{zfs}->{0}->{arcstats}->{size}; The Kstat entries are there, I'm just getting odd values out of them. Edit 2 I've just re-measured the arc size with arc_summary.pl - I've verified these numbers with kstat: System Memory: Physical RAM: 30701 MB Free Memory : 26697 MB LotsFree: 479 MB ZFS Tunables (/etc/system): ARC Size: Current Size: 744 MB (arcsize) Target Size (Adaptive): 119 MB (c) Min Size (Hard Limit): 64 MB (zfs_arc_min) Max Size (Hard Limit): 29677 MB (zfs_arc_max) The thing that strikes me is that the Target Size is 119MB. Looking at the graph, it's targeted the exact same value (124.91M according to cacti, 119M according to arc_summary.pl - think the difference is just 1024/1000 rounding issues) ever since Solaris 11 was installed. It looks like the kernel's making zero effort to shift the target size to anything different. The current size is fluctuating as the needs of the system (large) fight with the target size, and it appears equilibrium is between 700 and 1000MB. So the question is now a little more pointed - why is Solaris 11 hard setting my ARC target size to 119MB, and how do I change it? Should I raise the min size to see what happens? I've stuck the output of kstat -n arcstats over at http://pastebin.com/WHPimhfg Edit 3 Ok, weirdness now. I know flibflob mentioned that there was a patch to fix this. I haven't applied this patch yet (still sorting out internal support issues) and I've not applied any other software updates. Last thursday, the box crashed. As in, completely stopped responding to everything. When I rebooted it, it came back up fine, but here's what my graph now looks like. It seems to have fixed the problem. This is proper la la land stuff now. I've literally no idea what's going on. :(

  Read the article

• Expert iptables help needed?

  - by Asad Moeen

  After a detailed analysis, I collected these details. I am under a UDP Flood which is more of application dependent. I run a Game-Server and an attacker is flooding me with "getstatus" query which makes the GameServer respond by making the replies to the query which cause output to the attacker's IP as high as 30mb/s and server lag. Here are the packet details, Packet starts with 4 bytes 0xff and then getstatus. Theoretically, the packet is like "\xff\xff\xff\xffgetstatus " Now that I've tried a lot of iptables variations like state and rate-limiting along side but those didn't work. Rate Limit works good but only when the Server is not started. As soon as the server starts, no iptables rule seems to block it. Anyone else got more solutions? someone asked me to contact the provider and get it done at the Network/Router but that looks very odd and I believe they might not do it since that would also affect other clients. Responding to all those answers, I'd say: Firstly, its a VPS so they can't do it for me. Secondly, I don't care if something is coming in but since its application generated so there has to be a OS level solution to block the outgoing packets. At least the outgoing ones must be stopped. Secondly, its not Ddos since just 400kb/s input generates 30mb/s output from my GameServer. That never happens in a D-dos. Asking the provider/hardware level solution should be used in that case but this one is different. And Yes, Banning his IP stops the flood of outgoing packets but he has many more IP-Addresses as he spoofs his original so I just need something to block him automatically. Even tried a lot of Firewalls but as you know they are just front-ends to iptables so if something doesn't work on iptables, what would the firewalls do? These were the rules I tried, iptables -A INPUT -p udp -m state --state NEW -m recent --set --name DDOS --rsource iptables -A INPUT -p udp -m state --state NEW -m recent --update --seconds 1 --hitcount 5 --name DDOS --rsource -j DROP It works for the attacks on un-used ports but when the server is listening and responding to the incoming queries by the attacker, it never works. Okay Tom.H, your rules were working when I modified them somehow like this: iptables -A INPUT -p udp -m length --length 1:1024 -m recent --set --name XXXX --rsource iptables -A INPUT -p udp -m string --string "xxxxxxxxxx" --algo bm --to 65535 -m recent --update --seconds 1 --hitcount 15 --name XXXX --rsource -j DROP They worked for about 3 days very good where the string "xxxxxxxxx" would be rate-limited, blocked if someone flooded and also didn't affect the clients. But just today, I tried updating the chain to try to remove a previously blocked IP so for that I had to flush the chain and restore this rule ( iptables -X and iptables -F ), some clients were already connected to servers including me. So restoring the rules now would also block some of the clients string completely while some are not affected. So does this mean I need to restart the server or why else would this happen because the last time the rules were working, there was no one connected?

  Read the article

• VLC tv card streaming

  - by Franco

  I'm trying to stream the output of my desktop's tv card to my laptop using vlc without success. I have on both pcs ArchLinux installed. I'm stuck here: $ cvlc v4l2:///dev/video0:norm=pal-nc:frequency=543250:size=640x480:channel=0:input-slave=alsa:///dev/dsp:audio=0 --sout '#transcode{vcodec=mp4v,acodec=mpga,vb=3000,ab=256,vt=800000,keyint=80,deinterlace}:standard{access=http,mux=ogg,dst=192.168.0.2:8080}' --ttl 12 VLC media player 1.1.4 The Luggage (revision exported) Blocked: call to unsetenv("DBUS_ACTIVATION_ADDRESS") Blocked: call to unsetenv("DBUS_ACTIVATION_BUS_TYPE") [0x1c9e480] inhibit interface error: Failed to connect to the D-Bus session daemon: /usr/bin/dbus-launch terminated abnormally with the following error: Autolaunch error: X11 initialization failed. [0x1c9e480] main interface error: no suitable interface module [0x1ca1500] main interface error: no suitable interface module [0x1bb3120] main libvlc error: interface "globalhotkeys,none" initialization failed [0x1c9f940] dummy interface: using the dummy interface module... [0x1ca4850] main access out: creating httpd [0x1ebb340] mux_ogg mux: Open And on my laptop: $ vlc http://192.168.0.2:8080 VLC media player 1.1.4.1 The Luggage (revision exported) Blocked: call to unsetenv("DBUS_ACTIVATION_ADDRESS") Blocked: call to unsetenv("DBUS_ACTIVATION_BUS_TYPE") Blocked: call to setlocale(6, "") Blocked: call to sigaction(17, 0xb25c7058, 0xb25c70e4) Warning: call to signal(13, 0x1) Warning: call to signal(13, 0x1) Blocked: call to setenv("ORBIT_SOCKETDIR", "/tmp/orbit-zf", 1) Warning: call to srand(1287690122) Warning: call to rand() Blocked: call to setlocale(6, "") (process:17933): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. Warning: call to signal(13, 0x1) Blocked: call to setlocale(6, "") [0x8af5f04] main stream error: cannot pre fill buffer Any idea why this isn't working?

  Read the article

• Why do most songs in my media collection play twice? - Corrupt media?

  - by Dean

  Problem: Whether I'm playing the media with Rhythmbox on Ubuntu, Winamp on Windows, or my Nokia N95's media player, most of my audio files (OK, maybe only 40%) play twice. Info: I have a 500GB external 2.5" WD HDD, with a 150GB primary FAT32 partition labeled MUSIC. Inside this, I have about 500 folders containing about 10,000 MP3/WMA/M4A/WAV files. I manage the drive using Ubuntu 9.10, and frequently copy data to/from it using RSYNC, or on windows, TotalCopy. The visual output is different in each media player, but it behaves as if the 1 MP3 has the same song on it twice, and as soon as it ends it begins again. Winamp shows that the song goes for 2x as long as it should, The N95's media player shows the progress bar off the right-hand-side of the screen when it begins playing (then jumps back to the left, then continues along...). Rhythmbox doesn't show me how long the song is, nor does the progress bar move along the screen. Plea: It seams to me somewhere along the lines my collection has become corrupt... but where? And how? and please someone tell me I can fix it!! TIA, Dean.

  Read the article

• KVM + Cloudmin + IpTables

  - by Alex

  I have a KVM virtualization on a machine. I use Ubuntu Server + Cloudmin (in order to manage virtual machine instances). On a host system I have four network interfaces: ebadmin@saturn:/var/log$ ifconfig br0 Link encap:Ethernet HWaddr 10:78:d2:ec:16:38 inet addr:192.168.0.253 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::1278:d2ff:feec:1638/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:589337 errors:0 dropped:0 overruns:0 frame:0 TX packets:334357 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:753652448 (753.6 MB) TX bytes:43385198 (43.3 MB) br1 Link encap:Ethernet HWaddr 6e:a4:06:39:26:60 inet addr:192.168.10.1 Bcast:192.168.10.255 Mask:255.255.255.0 inet6 addr: fe80::6ca4:6ff:fe39:2660/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:16995 errors:0 dropped:0 overruns:0 frame:0 TX packets:13309 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2059264 (2.0 MB) TX bytes:1763980 (1.7 MB) eth0 Link encap:Ethernet HWaddr 10:78:d2:ec:16:38 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:610558 errors:0 dropped:0 overruns:0 frame:0 TX packets:332382 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:769477564 (769.4 MB) TX bytes:44360402 (44.3 MB) Interrupt:20 Memory:fe400000-fe420000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:239632 errors:0 dropped:0 overruns:0 frame:0 TX packets:239632 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:50738052 (50.7 MB) TX bytes:50738052 (50.7 MB) tap0 Link encap:Ethernet HWaddr 6e:a4:06:39:26:60 inet6 addr: fe80::6ca4:6ff:fe39:2660/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:17821 errors:0 dropped:0 overruns:0 frame:0 TX packets:13703 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:2370468 (2.3 MB) TX bytes:1782356 (1.7 MB) br0 is connected to a real network, br1 is used to create a private network shared between guest systems. Now I need to configure iptables for network access. First of all I allow ssh sessions on port 8022 on the host system, then I allow all connections in state RELATED, ESTABLISHED. This is working ok. I install another system as guest, it's IP address is 192.168.10.2, and now I have two problems: I want to allow the access from this host to the outside world, cannot accomplish this. I can ssh from the host. I want to be able to ssh to the guest from the outside world using 8023 port. Cannot accomplish this. Full iptables configuration is following: ebadmin@saturn:/var/log$ sudo iptables --list [sudo] password for ebadmin: Chain INPUT (policy DROP) target prot opt source destination ACCEPT all -- anywhere anywhere ACCEPT tcp -- anywhere anywhere tcp dpt:8022 ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED LOG all -- anywhere anywhere LOG level warning Chain FORWARD (policy ACCEPT) target prot opt source destination LOG all -- anywhere anywhere LOG level warning Chain OUTPUT (policy ACCEPT) target prot opt source destination LOG all -- anywhere anywhere LOG level warning ebadmin@saturn:/var/log$ sudo iptables -t nat --list Chain PREROUTING (policy ACCEPT) target prot opt source destination DNAT tcp -- anywhere anywhere tcp spt:8023 to:192.168.10.2:22 Chain INPUT (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain POSTROUTING (policy ACCEPT) target prot opt source destination The worst of all is that I don't know how to interpret iptables logs. I don't see the final decision of the firewall. Need help urgently.

  Read the article

• Identify differences between MP3 files

  - by Thingomy

  I have 2 old similar directory trees with MP3 files in them. I am happily using tools like diff and Rsync to identify and merge the files that are only present on one side, or are identical, I'm left with a bunch of files that are bitwise different. On running diff over a pair actually different files, (with -a tag to force text analysis) it produces incomprehensible gibberish. I have listened to files from both sides, and they both seem to play fine (but at nearly 10 minutes per song, when listening to them twice each, I haven't done many) I suspect the differences are due to some player in the past "enhancing" my collection by messing about with ID3 tags, but I can't be certain. Even if I identify differences in ID3 tags, I would like to confirm that no cosmic ray or file copy error issues have damaged any of the files. One method that occurs to be is finding the byte locations of the differences, and ignoring all changes in the first ~10kb of each file, but I don't know how to do this. I have on the order of a hundred or so files that differ across the directory tree. I found How to compare mp3, flac audio data in a file, ignoring header data (ID3 tag) etc.? -- but I can't run alldup due to being Linux only, and from the sounds of it, it would only partially solve my issues anyway.

  Read the article

• SSH Public Key Authentication only works if active session exists before

  - by Webx10

  I have a rather strange problem with my SSH configuration. I set up my server with the help of a Remote Access Card and configured everything with a KVM viewer. So while being logged into the server via the KVM Viewer I configured SSH with only pubkey and tried to login from my local laptop. It worked fine. If I quit the KVM Session (or logout with the user in the KVM session) I cannot login via ssh anymore (pubkey denied). SSH login only works as long as the user is somewhere still logged in. Any hints what the problem might be? Console output for a failed login (all personal data exchanged): OpenSSH_6.2p2, OSSLShim 0.9.8r 8 Dec 2011 debug1: Reading configuration data /Users/mylocaluser/.ssh/config debug1: Reading configuration data /etc/ssh_config debug1: /etc/ssh_config line 20: Applying options for * debug1: /etc/ssh_config line 103: Applying options for * debug1: Connecting to 100.100.100.100 [100.100.100.100] port 12345. debug1: Connection established. debug1: identity file /Users/mylocaluser/.ssh/id_rsa type 1 debug1: identity file /Users/mylocaluser/.ssh/id_rsa-cert type -1 debug1: identity file /Users/mylocaluser/.ssh/id_dsa type -1 debug1: identity file /Users/mylocaluser/.ssh/id_dsa-cert type -1 debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_6.2 debug1: Remote protocol version 2.0, remote software version OpenSSH_6.6.1p1 Ubuntu-2ubuntu2 debug1: match: OpenSSH_6.6.1p1 Ubuntu-2ubuntu2 pat OpenSSH* debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr [email protected] none debug1: kex: client->server aes128-ctr [email protected] none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA ab:12:23:34:45:56:67:78:89:90:12:23:34:45:56:67 debug1: Host '[100.100.100.100]:12345' is known and matches the RSA host key. debug1: Found key in /Users/mylocaluser/.ssh/known_hosts:36 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /Users/mylocaluser/.ssh/id_rsa debug1: Authentications that can continue: publickey debug1: Offering RSA public key: /Users/mylocaluser/.ssh/id_rsa2 debug1: Authentications that can continue: publickey debug1: Trying private key: /Users/mylocaluser/.ssh/id_dsa debug1: No more authentication methods to try. Permission denied (publickey). Console output for a successfull login (only possible while "active session" exists): OpenSSH_6.2p2, OSSLShim 0.9.8r 8 Dec 2011 debug1: Reading configuration data /Users/mylocaluser/.ssh/config debug1: Reading configuration data /etc/ssh_config debug1: /etc/ssh_config line 20: Applying options for * debug1: /etc/ssh_config line 103: Applying options for * debug1: Connecting to 100.100.100.100 [100.100.100.100] port 12345. debug1: Connection established. debug1: identity file /Users/mylocaluser/.ssh/id_rsa type 1 debug1: identity file /Users/mylocaluser/.ssh/id_rsa-cert type -1 debug1: identity file /Users/mylocaluser/.ssh/id_dsa type -1 debug1: identity file /Users/mylocaluser/.ssh/id_dsa-cert type -1 debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_6.2 debug1: Remote protocol version 2.0, remote software version OpenSSH_6.6.1p1 Ubuntu-2ubuntu2 debug1: match: OpenSSH_6.6.1p1 Ubuntu-2ubuntu2 pat OpenSSH* debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr [email protected] none debug1: kex: client->server aes128-ctr [email protected] none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA ab:12:23:34:45:56:67:78:89:90:12:23:34:45:56:67 debug1: Host '[100.100.100.100]:12345' is known and matches the RSA host key. debug1: Found key in /Users/mylocaluser/.ssh/known_hosts:36 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /Users/mylocaluser/.ssh/id_rsa debug1: Server accepts key: pkalg ssh-rsa blen 279 debug1: Authentication succeeded (publickey). Authenticated to 100.100.100.100 ([100.100.100.100]:12345). debug1: channel 0: new [client-session] debug1: Requesting [email protected] debug1: Entering interactive session. debug1: Sending environment. debug1: Sending env LANG = de_DE.UTF-8 Welcome to Ubuntu 14.04.1 LTS

  Read the article

< Previous Page | 466 467 468 469 470 471 472 473 474 475 476 477  | Next Page >