Search Results

Search found 29636 results on 1186 pages for 'fine uploader'.

Page 471/1186 | < Previous Page | 467 468 469 470 471 472 473 474 475 476 477 478  | Next Page >

• Toshiba Equium A110-252 laptop won't boot Windows.

  - by Drew Gibson

  I have a Toshiba Equium A110-252 laptop (XP Pro) which stopped booting a couple of weeks ago. The symptoms are that the laptop would display its DOS Toshiba splash screen, then the Windows (XP) boot screen would display, then a very brief blue screen flash, then back to the boot options screen (offering safe mode, safe mode with networking etc, last known good config, etc... none of these work). I assumed a duff HD, and swapped it for a new one and reinstalled from a TrueImage backup. This worked until I installed windows updates I think (the backup was a few months old), and now the PC is doing the same thing. I have installed a third, old HD (60GB) with Ubuntu 11.04 on it, and everything is fine. PC boots and runs Ubuntu beautifully. I need Windows running on it though ! Given these symptoms, could it a windows update issue ? Or might I have a hardware fault still ?

  Read the article

• Problem with running a flash Program from flashdrive

  - by rajivpradeep

  Hi, I have a USB drive with two partitions in it. one hidden and the other normal. i have an application which swaps the memory and runs the flash application in hidden zone. The problem is that the application works fine on windows7 and when run on WINXp, it swaps the partitions but doesn't run the flash applications but just keeps running in the background. I can see it in task manager. But, when i copy the application to desktop and run , it runs with no glitch I was facing the same problem on WIN7 too , but it was running as required when i ran it using "Run in Xp mode" and then i applied a SHIM and is running since then as required. the application is built using VC++ 2008 , What might be the problem.

  Read the article

• How to specify multiple HostName/Port combinations in .ssh/config

  - by leoluk

  I have multiple notebooks and workstations which pull and push from multiple Mercurial repositories on a central server. I usually use .ssh/config to set an alias: Host repo-server HostName server.somedomain User user143 IdentityOnly yes IdentityFile ~/hgkey Port 156 ... and some more options, you get the idea. I can then simply do a hg push ssh://repo-server//hgroot/someproject on every local repository, and I can change the server address and port in one place. For workstations, this works fine, but the notebooks can access the server either from inside the network or from outside, using a different address and a different port. Is there any way I can specify multiple HostName/Port combinations so that SSH automatically tries them in order? This way, the users could push and pull without having to care about the correct address. (of course, using a VPN would be the most correct solution)

  Read the article

• Interactive mode of PSExec not working for console application

  - by Focker

  I am trying to use PSExec to kick off a console application on a remote computer in an interactive state. When I run something like this: PsExec.exe -s -d -i 1 \\MyServer notepad.exe It launches Notepad just fine. If I then run this: PsExec.exe -s -d -i 1 \\MyServer C:\Temp\MyConsoleApp.exe It launches the command windows but doesn't do anything as far as I can tell. As in, when I run my console application locally, it displays a "heartbeat" every 5 seconds, but when I run it remotely, nothing is displayed in the command window. The .exe does show up as a process in Task Manager. Any ideas?

  Read the article

• Trouble with mod_proxy and mongrel_rails

  - by x3ro

  Hey there I'm trying to set up a mod_proxy - mongrel combination, but somehow, apache/mod_proxy is unable to access mongrel locally. The following is my configuration for mod_proxy: ProxyRequests Off ProxyPreserveHost On <Location / ProxyPass http://localhost:3000/ ProxyPassReverse http://localhost:3000/ Order deny,allow Allow from all </Location Mongrel/Rails ist running just fine, because I can access it from my browser, and even with lynx on the server. However, I get the following error when trying to use the proxy: [error] [client 127.0.0.1] Invalid Content-Length I would appreciate any help :D PS: Oh, and the server is running Plesk to configure vhosts, if thats important.

  Read the article

• Cannot connect to FTP server from external host

  - by h3.

  I have a FTP server (vsftpd) setuped on a Linux box (Ubuntu server). When I try to connect with a computer on the same network everything works fine as expected. But as soon the IP is external it won't connect.. I first assumed the port was blocked, but then: localserver:$ sudo tail -f /var/log/vsftpd.log Wed Jan 13 14:21:17 2010 [pid 2407] CONNECT: Client "xxx.xxx.107.4" remotemachine:$ netcat svn-motion.no-ip.biz 21 220 FTP Server And it hangs there. Do any ports other than 21 need to be open?

  Read the article

• Win Server 2003 - Task Scheduler - Tasks with GUI and Services

  - by august_month

  I need to run excel macro daily. I scheduled it with Windows Scheduler and it worked fine until I had to change my password. I wonder if it's possible to have a task scheduled without a password? As alternative we have third party scheduling software, but this software cannot launch excel. The tech support said that since excel has gui and scheduling software runs as service with "Allow to interact to Desktop" disabled, it cannot launch excel. Also tech support mentioned that "Allow to interact to Desktop" is not supported as of Vista. I totally trust tech support guy, I just need a work around that would make my network administrator and me happy. Regards.

  Read the article

• Can't ssh from Ubuntu to RHEL or CentOS

  - by Alex N

  I am trying to setup publickey based authenitcation for 2 different boxes. One RHEL another on e is CentOS. I am having same issue with both where ssh fails and falls back to password based authentication. Error that seems to be causing this is quite obscure: debug1: Unspecified GSS failure. Minor code may provide more information Credentials cache file '/tmp/krb5cc_1000' not found Both boxes are completely unrelated. I have my public key in .ssh/authorized_keys file on both boxes, all permissions are checked and good(700 for .ssh and 600 for internals) I have bunch of other servers that are running on various flavors(Gentoo, Fedora, FreeBSD etc.) and publickey ssh works just fine, but CentOS and RHEL giving me this for some reason :( Anyone experienced this before? I am not even sure how to further analyze this issue :(

  Read the article

• Microsoft DNS Server (Windows 2008) CNAME issue

  - by Lukes123

  I am using the DNS role in Windows Server 2008 R2. I have my records set up correctly with the following CNAMEs: {removed domain names for security} Currently, only the 'wsp' cname works. All the records are identically set up. I have checked with a DNS checker, and the other two CNAMEs do not resolve to anything. I have tried restarting the server, re-creating the forward lookup zone. Can anyone see what is wrong? 'A' records work fine when set.

  Read the article

• Windows Server 2008 R2 and OSX 10.5/.6/.7

  - by Keith Loughnane

  I'm handling a migration from a on old mac server to a Windows Server 2008 R2 machine running a 12TB(10 usable) RAID5 server. It's using an SMB share and now the OSX 10.5/.6 users can search sometimes it works but takes up to 10 minutes. The OSX 10.7 machine seems to be fine. I've looked in the root of the shared drive for a .Spotlight-V100 file (ls -a) but it doesn't seem to be there. mdutil says indexing is on for that volume and I have cleared the index using mdutil -E /Volumes/MeSharedVolume numerous times. Any ideas?

  Read the article

• VirtualBox cloned Ubuntu Server network error

  - by Luke

  I run a number of virtual servers on my network and I want to be able to easily clone base installations of Ubuntu Server. I use the VBoxManage command to clone the actual hard disk and I then create a new profile for my VM and copy over the settings of the original VM. However, when I boot into the cloned VM, there seems to be a network problem. When I issue a PING I get the message "Network unreachable". I traced it down to the fact that the virtual network card of the cloned VM has a different MAC address then the original VM. When I copy the MAC address the clone seems to work fine. How can I have the cloned VM have it's own MAC address?

  Read the article

• Nginx (for static files) and Apache (for dynamic content)?

  - by matthewsteiner

  So, my entire application runs on apache just fine. However, I want to test how much the requests per second increases if I put all static files through nginx instead. I found this thread: http://stackoverflow.com/questions/869001/how-to-serve-all-existing-static-files-directly-with-nginx-but-proxy-to-apache-t But I have a couple problems. I'm completely new to nginx, so I'm not sure where to put the configuration. (The file is at /etc/nginx/nginx.conf, but I don't know if I just add the code to the bottom or what?) Also, how can I have both servers running at the same time? Is it because they both listen on port 80? Right now I have to stop one to start the other, and that's as far as I've gotten. Thanks for any help.

  Read the article

• Best Practice: Migrating Email Boxes (maildir format)

  - by GruffTech

  So here's the situation. I've got about 20,000 maildir email accounts chewing up a several hundred GB of space on our email server. Maildir by nature keeps thousands of tiny a** little files, instead of one .mbox file or the like... So i need to migrate all of these several millions of files from one server to the other, for both space and life-cycle reasons. the conventional methods i would use all work just fine. rsync is the option that comes immediately to mind, however i wanted to see if there are any other "better" options out there. Rsync not handling multi-threaded transfers in this situation sucks because it never actually gets up to speed and saturates my network connection, because of this the transfer from one server to another will take hours beyond hours, when it shouldn't really take more then one or two. I know this is highly opinionated and subjective and will therefore be marked community wiki.

  Read the article

• Microsoft Wireless Keyboard 3000 v2.0 not working, but paired Wireless Mouse 5000 on same receiver does?

  - by John Straka

  I have a Microsoft Wireless Keyboard 3000 v2.0 that was bought paired with a Microsoft Wireless Mouse 5000. They're both Bluetooth and use the same receiver. The keyboard no longer works. The receiver is fine, as the mouse still works. The keyboard is still detected by Windows when the receiver is plugged in. The batteries have been replaced. There are no on/off switches on the keyboard or mouse, and no re-sync button on them or the receiver. Results are the same when using the receiver in a different USB port, or on a different machine. Anything else I might try to fix this, or should I hold a funeral for the keyboard?

  Read the article

• 32 bit programs can't access Internet in Windows 7 64 bit

  - by korona

  I recently got a new ASUS laptop with Windows 7 Home Premium pre-installed. It worked OK for a while but a couple of days ago, suddenly I couldn't access the Internet any more. After narrowing down the problem, I've reached the conclusion that what's happened is that 32 bit programs are suddenly not able to use the Internet, but 64 bit applications work just fine. Examples of programs that DON'T work any more: Google chrome Firefox Internet Explorer 8 World of Warcraft Examples of programs that DO work: Internet Explorer 8 (64 bit) ping (command line) nslookup (command line) ftp (command line) I'm pretty sure that those command line apps are 64 bit native. A re-install of Windows using the recovery partition on the laptop did fix the problem temporarily, but now it's back again. And I seem to be stuck between a rock and a hard place getting someone to take the responsibility for this; the vendor says to talk to ASUS, ASUS says it's a software issue, and Microsoft doesn't give support on OEM licenses... Does anyone know how to solve this issue?

  Read the article

• No internet access on Windows 7 - part 2

  - by Vnuk

  This is a continuation of my previous question. The problems started when I turned on my wireless connection for the first time. Since then, every time I boot my Windows 7, my LAN connection does not have internet access. In my previous question, I got a key answer (route delete). Now my procedure to get LAN internet connectivity (local network works fine) when I boot looks like this: Power on WLAN Disconnect LAN cable Power off WLAN Execute route delete 0.0.0.0 if 11 Connect LAN cable Now my LAN connection has internet access. Another behavior that I can't explain - while my LAN connection has no internet access, Network and Sharing center refers to it as Unknown network, with a public icon. When I go through the fore mentioned procedure, it is referred to with my home WLAN network name, with status connected, and the Unknown network disappears.

  Read the article

• Exchange 2010 550 5.7.1 unable to relay

  - by isorfir

  I have a website application that needs to send email via our Exchange servers. It sends email internally fine, but when sending to an external address I get the 550 5.7.1 unable to relay error. I followed this guide to create a connector to allow relay. Unfortunately, all office email was trying to use that connector and was not being routed correctly. It also appeared as though it opened it up for spammers to use. This is obviously unacceptable and a secure method is needed.

  Read the article

• Blocked Chrome by Company's Proxy

  - by gol.d.ace

  Chrome has just suddenly being blocked by my company for accessing internet. Instead, IE still works fine. It blocks the connection, the error says that my Chrome connection is timeout & the server is not responding Error 118 (net::ERR_CONNECTION_TIMED_OUT): The operation timed out). I guess the reason behind this is to standardize all user's browser for only using IE for security reason. I have tried to change the user-agent string (--user-agent="... ") so that the Chrome will pretend to be as IE. and yet, still not working! Could anyone shed my problem here? IE is just not comfortable so-called for surfing the web!

  Read the article

• Windows 7 x64 Hard Freezing (again)

  - by Lanissum

  Awhile ago, my computer was randomly freezing a few minutes after booting, and I ended up replacing the CPU and mobo after testing the RAM and hard drive, I also couldn't find anything wrong with the video card. So after replacing the presumably faulty hardware, everything worked fine for about a month and a half. All of a sudden, My computer is randomly freezing a few minutes after loading up any intensive application (games, mostly). Most of the time it just freezes with the current frame until I hard reset, although once it printed a BSOD message stating that dxgmms1.sys was to blame. The only difference between these two episodes I can think of is that I can do word/internet/work without issue now, as opposed to the near uselessness my computer was rendered last time. For those of you who want to know, I tested my memory with memtest86 (for 64 bit machines). I can't figure out what could have started this latest round of issues, the event logger just states that a kernel-power event has occurred (like last time) but I think thats just a generic "this machine has rebooted after a sudden shutdown" message.

  Read the article

• VM: Windows 7 host, Linux guest, VT-d?

  - by chx

  I am sick of the driver issues of Linux. So I am planning to switch to Windows 7 as a host and virtualize my Linux into it. My laptop has integrated Intel graphics and supports VT-d. For speed reasons I would like to assign that card to Linux. Now, Parallels could do it but this page says Note: If you have only one PCIe video adapter, its name will be grayed out in the PCI Devices list and you will not be able to allocate it to your virtual machines. I would be perfectly fine with a headless Windows 7 (I can remotely admin from other computers or just the Linux guest) -- is there any VM software that doesn't have this restriction?

  Read the article

• netbook losing internet connection

  - by cometbill

  I have a netbook that occassionally, usually once or twice a day, maybe more, will lose its internet connection while I am on Skype (that's when I notice it most, it may happen more often). The little yellow dot appears over the networking icon in the system tray, which when I click on it says no internet access at the top of the popup menu, and next to the router connection that I have. Disconnecting and reconnecting usually rectifies full internet access again. I'm not sure if leaving it for any amount of time allows the netbook to automatically reconnect again. Everything seems fine with my laptop. I don't think this loses connection in the same way. I'm using Windows 7 home premium.

  Read the article

• MySQL Unions/Subselects not utilizing keys from associated tables

  - by Brett

  I've noticed by doing EXPLAINs that when a MySQL union between two tables is used, mysql creates a temporary table, but the temp table does not use keys, so queries are slowed considerably. Here is an example: SELECT * FROM ( SELECT `part_number`, `part_manufacturer_clean`, `part_number_clean`, `part_heci`, `part_manufacturer`, `part_description` FROM `new_products` AS `a` UNION SELECT `part` as `part_number`, `manulower` as `part_manufacturer_clean`, `partdeluxe` as `part_number_clean`, `heci` as `part_heci`, `manu` as `part_manufacturer`, `description` as `part_description` FROM `warehouse` AS `b` ) AS `c` WHERE `part_manufacturer_clean` = 'adc' EXPLAIN yields this: id select_type table type possible_keys key key_len ref rows Extra 1 PRIMARY <derived2> ALL (NULL) (NULL) (NULL) (NULL) 17206 Using where 2 DERIVED a ALL (NULL) (NULL) (NULL) (NULL) 17743 3 UNION b ALL (NULL) (NULL) (NULL) (NULL) 5757 (NULL) UNION RESULT <union2,3> ALL (NULL) (NULL) (NULL) (NULL) (NULL) In this case, part_manufacturer_clean and manulower are keys in both tables. When I don't use the subselects and union, and just use one table, everything works fine. I'm not sure if the issue is with the union or with the subselects. Is there any way to union two tables and still use keys/indexes for performance?

  Read the article

• HP Wireless Printer not working

  - by Omri Spector

  I have installed an HP DeskJet 4620 driver on a win 7 machine. All works perfectly for several days, and than printing is not longer possible. Instead I get the message: "Unable to communicate with printer". This happened on every Win 7 PC I tried, and none of the HP/MS sites contain any relevant info... (Posting this so that the answer appears online, as I did solve it after much work) Solution: It appears that HP installation puts a unique "port" called "HP Network re-discovery". It stops working after some time (possibly after the first time the printer/pc enter sleep mode). BUT, the standard MS TCP port works just fine. So: Go to "Printers" Right click Printer Click "Printer properties" and then "Printer" or "Fax" (for both - do all this twice) Click "Add Port..." Select "Standard TCP Port" Fill in details Move printer to use the new port by un-checking the old one and checking the new one Happy printing.

  Read the article

• Dhcp clients fail after successful import of server to new machine (win2k3)

  - by Tathagata

  I transfered the configs of a dhcp server from one server to another both running Windows Server 2003 R2 following http [://] support.microsoft.com/kb/325473. The new server has a statically configured ip(outside the scope) like the old one. Stopped the server on the old, and started up in the new server (authorized too) - but when I ipconfig /renew from a client its network interface fails with all 0.0.0.0 (or 169...*). I read somewhere I need to reconcile the scope to sync the new registry values ('ll try this tomorrow). What other troubleshooting steps can I take other than these (which didn't help)? Things work fine when the old server resurrects and the new one is taken down. The new server showed there was no requests for offer.

  Read the article

• grep only returns help text

  - by Pete Mancini

  Well, I am perplexed. I am working with an Ubuntu server and I type in grep 'bash' *.sh BUT fgrep 'bash' *.sh works like a champ. which grep and which fgrep both point to their respective executables in /bin. I am perplexed as to what I am doing wrong. EXAMPLE output: $ grep -F 'grounding' repl.clj Usage: grep [OPTION]... PATTERN [FILE]... Search for PATTERN in each FILE or standard input. PATTERN is, by default, a basic regular expression (BRE). Example: grep -i 'hello world' menu.h main.c $ fgrep 'grounding' repl.clj (p/concepts-for-grounding-term imp1 "PERSON" "summary") See? grep is failing but fgrep is working fine. That is why I am perplexed.

  Read the article

< Previous Page | 467 468 469 470 471 472 473 474 475 476 477 478  | Next Page >