Search Results

Search found 21884 results on 876 pages for 'external address'.

Page 474/876 | < Previous Page | 470 471 472 473 474 475 476 477 478 479 480 481  | Next Page >

• Getting a black laptop screen

  - by Vivek

  I get a black screen when I boot my laptop. The laptop was in sleep mode initially, so when I pressed the power button, it looked as if it woke up from sleep mode, but the screen was blank. So, I held down the power button to force shutdown the laptop and then removed the battery. But after booting the laptop the screen still remains black. The bios/boot screen remains black as well. I have tried connecting it to external hdmi/vga/s-video devices and booting still no go. Windows loads fine, as I can type the password and get the 'Ding', then alt-f4 and shutdown windows. If it helps, the laptop model is Asus G1S-A1. Thanks in advance!

  Read the article

• Screen flicker -> Severe System Slowdown?

  - by Adam Robinson

  I'm using a Dell D830 laptop, and over the last few weeks it's been developing a very irritating screen flicker problem that leads to the system slowing down almost to the point of unusability. At seemingly random times (no commonality between how long the system has been running, what I was doing, what applications were open, etc.) my screen (I use two external LCD's with the laptop closed in a dock) flickers for a moment, then the system becomes incredibly slow. The screen redraws painfully slowly--almost like what you might expect to see with generic graphics drivers installed--and the entire system is maddeningly unresponsive. The only thing that seems to be able to correct the issue is a restart. I've checked the event logs and nothing out of the ordinary is there, and definitely nothing that's common to all of the events. I'm running XP Pro SP2. Any ideas?

  Read the article

• Should app config files be in jboss/bin directory?

  - by djangofan

  I am a Integration Engineer for a software company. My development team has generated various jboss .ear applications that rely on configuration files being in the jboss/bin directory and setting the CLASSPATH externally using batch files (on Windows from an external LIB directory) rather than using jboss's internally loaded classes. Is this the right/standard way of doing things? Would some other location be better (for the config files) such as jboss/server/instancename/deploy or some other directory? Any opinons on how I can direct my development team to doing things in a best practices fashion?

  Read the article

• Why does iChat Server keep connecting to proxy.eu.jabber.org?

  - by Tom Hamming

  I have OS X Server 10.6.5 running on a new Mac Mini (server model), serving several functions among which is iChat Server (iChat and Pidgin on Windows as clients). In the iChat log in Server Admin, I kept seeing entries about connecting to proxy.eu.jabber.org. It's for our office network and I wasn't excited about external access to it, so I disabled server-to-server XMPP federation and now the connections just time out. But why is it doing that in the first place? Sample log entry: (datetime) (servername)jabberd/resolver[portnum]: [xmpp-server._tcp.proxy.eu.jabber.org resolved to 208.68.163.220:5269 (300 seconds to live) then: sending dialback auth request for route '(full server hostname)/proxy.eu.jabber.org' A couple minutes later, it comes back with: dialback for outgoing route '(full server hostname)/proxy.eu.jabber.org' timed out

  Read the article

• Moving the OS X swap file to a faster drive

  - by Milky Joe

  I have a new Mac Mini that's running the latest version of Snow Leopard. The internal drive is a bit of a slouch. I'd like to move the swap file (or whatever it's called is OS X) to my faster external drive (Firewire 800, permanently connected). Is this possible? I've read that the old solutions aren't working in 10.6. My Mac has 2GB of RAM, so the swap file is used quite a bit when I'm doing intensive work (Photoshop etc).

  Read the article

• Vim middle mouse click horizontal scroll

  - by vexe

  I'm running Windows 7 x64 with Gvim 7.4 Using my external mouse, I was wondering how to achieve 'horizontal scroll', I read all the documentation about it but still haven't figured out how to achieve it. 'horizontal scroll' to me means holding down the middle mouse button and moving the mouse horizontally. But that's just not working. Essentially what I want to achieve is something like this VS plugin. I know about zl/zh but I want to scroll horizontally from the mouse (by holding MMB and moving horizontally like I said, somehow, maybe?) So when does ScrollWheelLeft/ScrollWheelRight events get fired? Thanks.

  Read the article

• Windows Server 2008 R2 DNS Server not working?

  - by wolfvilleian

  I have a server running Windows Server 2008 R2 hosting a DNS server, exchange 2010 and is a domain controller. One computer on the network (and domain) can ping the server 25% of the time, also when I try to ping it's own hostname it also does not work. However another computer that is on the domain can ping it fine, and another computer on the network but not domain can ping fine as well. The computer that cannot ping the server is setup to use the DNS server running on the server only (secondary dns points to nothing) and it will resolve the hostname of the server to the external IP not internal when the other two computers correctly resolve the internal All 3 computers and server are connected directly into the same switch. Does anyone have any ideas on how to fix this? Thanks

  Read the article

• One EC2 source with distributed varnish machines

  - by Elad Lachmi

  I have a web site hosted in an EC2 instance (2008 r2 + iis7.5 + sql server). I put one linux box running RHEL with varnish. After some configuration trail and error, I found a configuration that works. Now I want to duplicate the varnish boxes to other availability zones, but continue to pull the pages from the original windows box. It is my understanding that I can put the varnish boxes in different zones and pull from the windows box via it's external IP. But what do I need to do in order for each user to receive content from the box physically closest to them? Is this even possible? Thank you!

  Read the article

• Redmine Subversion: LDAP _and_ local auth

  - by Frank Brenner

  I need to set up a subversion repository with apache authentication against both an external LDAP server as well as the local Redmine database. That is, we have users whose accounts exist only in the LDAP directory and some users whose accounts only exist in the local Redmine db - all should be able to access the repo. I can't quite seem to get the apache config right for this. I know I saw a how-to for this at some point, I think using Redmine.pm, but I can't seem to find it anymore.. Thanks.

  Read the article

• Route traffic on vpn to another interface on an ASA 5510

  - by Dave

  I have a ASA 5510 that has about 60-70 vpn tunnels. I have four interfaces on the device: 1)External, 2)192.168.1.0, 3)192.168.2.0, 4) 192.168.3.0 A VPN tunnel is configured from the remote site (192.168.200.0) to the 192.168.2.0 subnet on the ASA. I have remote applications I would like the users at the remote site to be able to access which are hosted on the 192.168.3.0 subnet. I can route traffic between the subnets that are located on the ASA. Any way I can route traffic from the remote site to the 192.168.3.0?

  Read the article

• Sendmail relay out of Amazon EC2?

  - by Stephen Belanger

  I have a site running on CentOS 5.4 through Amazon EC2. Unfortunately, Amazon has had nothing but trouble with their entire IP range getting black listed from spam tracking services regularly. I need a mail server, so I setup an smtp server elsewhere that I want to send to, but I can't just send directly to it through PHP because the direct smtp request is way too slow. What I want to do is relay through sendmail, but I've never used sendmail before, so I have no idea how to configure it. All I want is for all emails sent from localhost to be relayed to one specific external server, but I don't know how to do that. I tried to find a tutorial online, but couldn't find anything that was particularly clear as to how I go about doing that. Can anyone help me out?

  Read the article

• Darik's Boot And Nuke - ERROR /dev/sda

  - by user1403844

  I'm trying to wipe the drive of an old company computer with DBAN so I can install Redhat Enterprise and learn Linux (it's a Dell Inspiron 1210, if that matters). I burnt DBAN to a CD and boot from that CD (running on an external USB CD drive). Whenever I try to run the utility--whether it's Autonuke, or any of manual wiping methods-- it spits on the errors: ERROR /dev/sdb ERROR /dev/sda From what I've read on some other forums, there are some issues with other drives or removable media interfering however I've disabled all other drives in bios, leaving just CD/DVD and the Hard Disk but still no luck. Any advice on how I can reconcile these errors and wipe the disk?

  Read the article

• The cable of my USB port hub is too short - what to do?

  - by Anna

  Hi, I just bought a new USB port hub "MSY USB 2.0 4-port hub". It has two inputs: A small USB entrance input for external power (?) The problem is that the cable that comes with the hub (small USB on one end, large USB on the other - to input into my computer), is too short for my needs. Is there a solution to this? buying a longer cable might be risky, I know that it might cause problems with power. Is there anything else I can do to make it work? Thanks.

  Read the article

• Screen is black at login screen if display driver is enabled

  - by Amir Rachum

  I have a Lenovo x200 and recently its screen didn't work, so I took it to a repair lab. The guy told me they replaced the screen inverter. I powered up the laptop and the ThinkPad logo was shown, so I was happy. When I got home the computer would boot up, then instead of the logon screen, I got a black screen. Went to safe mode, disabled the display adapters, reset the computer, and I got a clean boot. Then I tried to reinstall the drivers, and it just led to the same condition. My video card is (from device manager): Mobile Intel(R) 4 Series Express Chipset Family. Now my laptop works as I'm working with display drivers disabled, but without display drivers I can't watch movies, etc. Any solution to this problem? Edit: I plugged in an external monitor and it works on it with display drivers enabled. However, it does not find the laptop monitor.

  Read the article

• Dell Latitude E4300 TouchPad - Odd Behavior

  - by Cade Roux

  I'm seeing some intermittent behavior on the touchpad. First it wasn't working at all. Then during restart, for a little while it seemed like the buttons attached to the joystick and external mouse were both swapped left/right. Then I went in to the dell touchpad control and disabled the touchpad and re-enabled it and nothing happened. Then a short while after disabling the joystick the touch pad started working. So I restarted to see if it would keep the settings and before login, the touchpad appeared to work, then after login it stopped working for a few minutes while login continued. Then after the login was almost completed it started to work again. It appeared to have retained the settings for the disabled joystick. It seems like perhaps there are conflicting mouse drivers trying to simultaneously or similar. This doesn't seem normal for the touchpad to be disabled for so long after login. What steps should I take to ensure the drivers are right?

  Read the article

• Dell Latitude E4300 TouchPad - Odd Behavior

  - by Cade Roux

  I'm seeing some intermittent behavior on the touchpad. First it wasn't working at all. Then during restart, for a little while it seemed like the buttons attached to the joystick and external mouse were both swapped left/right. Then I went in to the dell touchpad control and disabled the touchpad and re-enabled it and nothing happened. Then a short while after disabling the joystick the touch pad started working. So I restarted to see if it would keep the settings and before login, the touchpad appeared to work, then after login it stopped working for a few minutes while login continued. Then after the login was almost completed it started to work again. It appeared to have retained the settings for the disabled joystick. It seems like perhaps there are conflicting mouse drivers trying to simultaneously or similar. This doesn't seem normal for the touchpad to be disabled for so long after login. What steps should I take to ensure the drivers are right?

  Read the article

• How do I recover lost/inacessible data from my storage device?

  - by TomWij

  What steps can I take to try to recover lost or inaccessible data from any storage device? Answers: This applies to any main storage devices; eg. internal/external hard drive, USB stick, Flash memory. The most important thing is to STOP using it, any type of I/O can ruin your chances of a recovery. Click here in case you suspect corruption or bad sectors. Click here in case you suspect mechanical issues.

  Read the article

• Windows won't ctrl+c and ctrl+v

  - by Thomasstuck

  Using Ctrl+C and V I am unable to copy or paste anything. I have tried many different applications and still no luck. I am able to copy/paste via the shortcut menu when you right click the mouse. Ctrl+F works which means the Ctrl button is functional. I've tried restoring to an earlier restore point. I also ran SFC /SCANNOW (System File Checker) which did not find any errors. Ctrl+C and then right click and paste doesn't work either. I have tried with external and internal keyboard and still no luck. I've clicked on all the relevant search results from Google but none of them work for me. Does anyone know what may be causing this issue and how I can correct it? This problem comes and goes at random times.

  Read the article

• Setting a Static IP Running FreeBSD8 in VirtualBox hosted on Windows 7

  - by gvkv

  I'm using VirtualBox on Windows 7 (host) to run a FreeBSD (guest) based web server. I`ve assigned a static ip of 192.168.80. 1 to the (virtualized) NIC which is run in bridged mode. The problem is that when I ping an external server (such as google.com) I get a No route to host error: dimetro# ping google.com PING google.com (66.249.90.104): 56 data bytes ping: sendto: No route to host ... I can ping the BSD server from both another virtualized machine and my host machine and from the server, I can ping everything on the network. The router ip is 192.168.1.1/16. ADDENDUM: I have the following lines in /etc/rc.conf on the BSD VM to configure networking: defaultrouter="192.168.1.1" ifconfig_em0="inet 192.168.80.1 netmask 255.255.0.0"

  Read the article

• Dell Studio XPS 16 Runs Hot

  - by dtbarne

  Specs: 1920x1080 i7 1.6 GHz quad core 6GB RAM 1GB ATI Radeon HD 6570M/5700 Series 500GB 7200rpm Hard Drive Love this laptop for many reasons, but it constantly runs hot (CPU is low 70s with basic tasks and often 80+ is not uncommon) and I'm finding it too much to deal with. The laptop feels very hot (almost too hot for a lap) and often gets so hot that the OS slows down or freezes altogether. I've tried cleaning it out and even replacing the thermal paste. I often use an external cooler, but it only helps 3-5 degrees and it's a pain to have to use. I've come to the conclusion that it just runs hot. I have two questions: What is to blame? The i7 processor, the gfx card, or is it just that this laptop has poor cooling? Does the Dell XPS 15 run cooler? I'm looking at replacing my current laptop, but I don't want to run into the same problem.

  Read the article

• How can I run Ghost from a bootable USB key drive?

  - by Joe Philllips

  I have a laptop that does not have a cd-rom or floppy drive. It is able to boot from USB though. I have a disk image (ghost) of the disk that I need to restore back onto the laptop. I can't find a way to actually run the Ghost utility from a USB key though. I believe the ghost.exe should run from within DOS just fine but I can't seem to create a bootable USB key with DOS on it that allows me to run an EXE. Edit: I managed to find a Ghost utility that I could load from a bootable USB drive. Unfortunately, when I plug in my NTFS external drive (USB), it is not detected.

  Read the article

• How do I fix "Setup did not find any hard disk drives installed in your computer" error during Win X

  - by CT

  I just bought a nettop. It came with WinXP Home. I first installed Win 7 on it. I wasn't that happy with the performance so I decided to go back to XP. I am using an external dvd drive and a Win XP Pro disc. I boot from the dvd drive and during the install get this error: Setup did not find any hard disk drives installed in your computer. Make sure any hard disk drives are powered on and properly connected to your computer, and that any disk-related hardware configuration is correct. This may involve running a manufacturer-supplied diagnostic or setup program. Setup cannot continue. To quit Setup, press F3. This is the nettop in question: http://www.newegg.com/Product/Product.aspx?Item=N82E16883103228

  Read the article

• Connect to MySQL EC2 Instance outside of VPC

  - by Brian W

  I have a VPC setup with a few EC2 instances inside. I'm attempting to connect to a MySQL database on an EC2 instance outside the VPC, with no luck. I have the security groups on the VPC EC2 instances set to outbound 0.0.0.0/0 which I assumed would let it connect to any outbound connection. I also followed a tutorial on creating a NAT, but wasn't exactly sure how to use it to connect to an external database. In any case, if anyone has experience and knows the proper way to connect to a database outside the VPC, it would be greatly appreciated!

  Read the article

• HALEVT troubleshooting: VFAT usb storage device gets mounted with root:root user:group

  - by Nova deViator

  Hi, i'm banging my head for number of days around this problem. using Halevt for automounting, everything mostly works, but the only thing is that Halevt mounts external USB storage devices as root. So, as user i cannot write to files on them. Halevt gets run as halevt user on boot through /etc/init.d script. This is Ubuntu Lucid with Awesome WM. No GDM. Running halevt as user seem to not work (halevt runs but doesn't respond on Insert) I know HAL is deprecated and removed and i should probably write my own UDEV rules, but until then it seems there must a be simple hack that enables mounting VFAT/NTFS devices with specific uid/gid. this question/answer helps a lot, but not specifically to the above.

  Read the article

• reverse proxy only from one internal server

  - by hrost

  I have configured a reverse proxy and is working ok for one internal server, for example our mail server. Now, I like to know if it is possible to configure a reverse proxy for only one server /application (in this case our web intranet). Our problem is Intranet call another aplication inside same intranet server and another internal servers, and the only way that I know to publish this resources is make a reverse proxy in our dmz apache for all apllications servers, but I like that from our DMZ reverse apache only intranet will be called, and other applications will be called by intranet server, and not reverse proxy. I like to configure with this system for security reason, and only allow external access to one server. I have configured With Debian Squeeze and apache 2.2 It is possible? How?

  Read the article

< Previous Page | 470 471 472 473 474 475 476 477 478 479 480 481  | Next Page >