Search Results

Search found 23004 results on 921 pages for 'internet mapping'.

Page 475/921 | < Previous Page | 471 472 473 474 475 476 477 478 479 480 481 482  | Next Page >

• Laptop connects to other network but not to my home wireless

  - by Nilesh

  My home network's wireless SSID is say "XYZ" I also have an ethernet wire from the same router. I have two laptops A and B Earlier both A and B were able to connect to my home internet through the ethernet and wireless. Suddenly, the laptop B can no longer connect to XYZ or through ethernet. When I do plug the wire, i get the connection icon all green but when I try to access any web page it errors out (page not found) But strangely laptop B connects to my neighbours wireless SSID "ABC". I have also tested laptop B with other networks and it connects fine. Laptop A and many other devices still connect fine with my home wireless "XYZ" Strange thing is when my laptop B connects wireless through XYz, it gets the IP address but then none of the browsers (chrome,firefox, IE) can show any web pages. What settings should I be checking on laptop B that is preventing it to connect to my home internet. Thank you

  Read the article

• write to depth buffer while using multiple render targets

  - by DocSeuss

  Presently my engine is set up to use deferred shading. My pixel shader output struct is as follows: struct GBuffer { float4 Depth : DEPTH0; //depth render target float4 Normal : COLOR0; //normal render target float4 Diffuse : COLOR1; //diffuse render target float4 Specular : COLOR2; //specular render target }; This works fine for flat surfaces, but I'm trying to implement relief mapping which requires me to manually write to the depth buffer to get correct silhouettes. MSDN suggests doing what I'm already doing to output to my depth render target - however, this has no impact on z culling. I think it might be because XNA uses a different depth buffer for every RenderTarget2D. How can I address these depth buffers from the pixel shader?

  Read the article

• 2nd/3rd version of wireless network appears

  - by neildeadman

  I replaced an old SpeedTouch ADSL router with a Netgear DG384 that I have and whilst doing so decided to change the wireless password. For this question assume my wireless network SSID is DeddersHome. On my netbook and macbook pro (running Win7) it won't connect to the Internet. When I hover over the tray icon for wireless it says "DeddersHome 2" and "DeddersHome 3" have no internet connection. What are these additional wireless networks? I can't see them in the wireless network list on any wireless device I have. Wired connections and wireless through my iPhone work fine. I saw this before with the SpeedTouch, but it just went away!! I also have one Apple AirPort Express connected to the wireless network which my Xbox is connected to (wired). This all worked before... I am going to remove AirPort to see if it is this causing the problem, but thought I'd ask the question to give it time for an answer whilst I continue to search. Cheers

  Read the article

• Davicom DM9601 USB LAN NIC Ubuntu 11.10 issue

  - by Gaurav_Java

  I have a davicom dm9601 USB ethernet card. When I plug in the device, it is detected and drivers are loaded, but I can't connect to internet using it. It works perfectly on XP, other laptop but not working on Ubuntu 11.10 How can I install the driver for this? I have tried many things But nothing is working. If I go to this link driver but not compiling or may I be doing something wrong. I found this one but don't know how to follow these steps . This is my lsusb output: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 004: ID 064e:a103 Suyin Corp. Acer/HP Integrated Webcam [CN0314] Bus 003 Device 002: ID 08ff:1600 AuthenTec, Inc. AES1600 Bus 005 Device 002: ID 0a46:9601 Davicom Semiconductor, Inc. DM9601 Fast Ethernet Adapter Bus 006 Device 002: ID 046d:c045 Logitech, Inc. Optical Mouse Bus 003 Device 003: ID 0a5c:2101 Broadcom Corp. Bluetooth Controller Bus 004 Device 002: ID 04d9:1702 Holtek Semiconductor, Inc. But when I connected my Internet from different system its start working.

  Read the article

• Windows 7 will not install a root certificate

  - by Farseeker

  I have a web service that uses a self-signed certificate, so I need to install the certificate as a Trusted Root so that I can avoid all the security errors that having a self-signed certificate brings with it. Using Windows 7, I'm going to: Start > Internet Explorer > Run as Administrator > Tools > Internet Options > Content > Certificates > Trusted Root Certification Authorities > Import > (select file) > Next > OK, and Windows reports Import Successful However, the import is NOT successful. The certificate does not show in the list of trusted roots, and certificate errors still show up. If I import the certificate into the Trusted Publishers container, it imports correctly, but this does not solve my security errors. Any ideas?

  Read the article

• Using EUSM to manage EUS mappings in OUD

  - by Sylvain Duloutre

  EUSM is a command line tool that can be used to manage the EUS settings starting with the 11.1 release of Oracle. In the 11.1 release the tool is not yet documented in the Oracle EUS documentation, but this is planned for a coming release. The same commands used by EUSM can be performed from the Database Console GUI or from Grid Control*. For more details, search for the document ID 1085065.1 on OTN. The examples below don't include all the EUSM options, only the options that are used by EUS. EUSM is user friendly and intuitive. Typing eusm help <option> lists the parameters to be used for any of the available options. Here are the options related to connectivity with OUD : ldap_host="gnb.fr.oracle.com" - name of the OUD server. ldap_port=1389 - nonSSL (SASL) port used for OUD connections.  ldap_user_dn="cn=directory manager" - OUD administrator nameldap_user_password="welcome1" - OUD administrator password Find below common commands: To List Enterprise roles in OUD eusm listEnterpriseRoles domain_name=<Domain> realm_dn=<realm> ldap_host=<hostname> ldap_port=<port> ldap_user_dn=<oud administrator> ldap_user_password=<oud admin password> To List Mappings eusm listMappings domain_name=<Domain> realm_dn=<realm> ldap_host=<hostname> ldap_port=<port> ldap_user_dn=<oud admin> ldap_user_password=<oud admin password> To List Enterprise Role Info eusm listEnterpriseRoleInfo enterprise_role=<rdn of enterprise role> domain_name=<Domain> realm_dn=<realm> ldap_host=<hostname> ldap_port=<port> ldap_user_dn="<oud admin>" ldap_user_password=<oud admin password> To Create Enterprise Role eusm createRole enterprise_role=<rdn of the enterprise role> domain_name=<Domain> realm_dn=<realm> ldap_host=<hostname> ldap_port=<port> ldap_user_dn="<oud admin>" ldap_user_password=<oud admin password> To Create User-Schema Mapping eusm createMapping database_name=<SID of target database> realm_dn="<realm>" map_type=<ENTRY/SUBTREE> map_dn="<dn of enterprise user>" schema="<name of the shared schema>" ldap_host=<oud hostname> ldap_port=<port> ldap_user_dn="<oud admin>" ldap_user_password="<oud admin password>" To Create Proxy Permission eusm createProxyPerm proxy_permission=<Name of the proxypermission> domain_name=<Domain> realm_dn="<realm>" ldap_host=<hostname> ldap_port=<port> ldap_user_dn="<oud admin>" ldap_user_password=<oud admin password> To Grant Proxy permission to Proxy group eusm grantProxyPerm proxy_permission=<Name of the proxy permission> domain_name=<Domain> realm_dn="<realm>" ldap_host=<hostname> ldap_port=<port> ldap_user_dn="<oud admin>" ldap_user_password=<password> group_dn="<dn of the enterprise group>" To Map proxy permission to proxy user in DB eusm addTargetUser proxy_permission=<Name of the proxy permission> domain_name=<Domain> realm_dn="<realm>" ldap_host=<hostname> ldap_port=<port> ldap_user_dn="<oud admin>" ldap_user_password=<oud admin password> database_name=<SID of the target database> target_user=<target database user> dbuser=<Database user with DBA privileges> dbuser_password=<database user password> dbconnect_string=<database_host>:<port>:<DBSID> Enterprise role to Global role mapping eusm addGlobalRole enterprise_role=<rdn of the enterprise role> domain_name=<Domain> realm_dn="<realm>" database_name=<SID of the target database> global_role=<name of the global role defined in the target database> dbuser=<database user> dbuser_password=<database user password> dbconnect_string=<database_host>:<port>:<DBSID> ldap_host=<oid_hostname> ldap_port=<port> ldap_user_dn="<oud admin>" ldap_user_password=<oud admin password>

  Read the article

• ICAM Webcast Replay and slides

  - by Darin Pendergraft

  On October 10, 2012 Derrick Harcey and I co-presented on how Oracle IDM helps customers address the guidelines of Identity Credential Access Management, from a Federal (FICAM) and a State (SICAM) perspective. If you missed the webcast, here is a link to the replay:  webcast replay link. Derrick did a nice job reviewing the various ICAM components and architectures, and then invited me to provide additional detail on the Oracle technology stack.  He then closed by mapping the ICAM architectures to various components of the Oracle IDM platform. Icam oracle-webcast-2012-10-10 from OracleIDM The next webcast in the Secure Government Training Series, Safeguarding Government Cyberspace will be held Wednesday, November 28th.

  Read the article

• Data Source Security Part 5

  - by Steve Felts

  If you read through the first four parts of this series on data source security, you should be an expert on this focus area.  There is one more small topic to cover related to WebLogic Resource permissions.  After that comes the test, I mean example, to see with a real set of configuration parameters what the results are with some concrete values. WebLogic Resource Permissions All of the discussion so far has been about database credentials that are (eventually) used on the database side.  WLS has resource credentials to control what WLS users are allowed to access JDBC resources.  These can be defined on the Policies tab on the Security tab associated with the data source.  There are four permissions: “reserve” (get a new connection), “admin”, “shrink”, and reset (plus the all-inclusive “ALL”); we will focus on “reserve” here because we are talking about getting connections.  By default, JDBC resource permissions are completely open – anyone can do anything.  As soon as you add one policy for a permission, then all other users are restricted.  For example, if I add a policy so that “weblogic” can reserve a connection, then all other users will fail to reserve connections unless they are also explicitly added.  The validation is done for WLS user credentials only, not database user credentials.  Configuration of resources in general is described at “Create policies for resource instances” http://docs.oracle.com/cd/E24329_01/apirefs.1211/e24401/taskhelp/security/CreatePoliciesForResourceInstances.html.  This feature can be very useful to restrict what code and users can get to your database. There are the three use cases: API Use database credentials User for permission checking getConnection() True or false Current WLS user getConnection(user,password) False User/password from API getConnection(user,password) True Current WLS user If a simple getConnection() is used or database credentials are enabled, the current user that is authenticated to the WLS system is checked. If database credentials are not enabled, then the user and password on the API are used. Example The following is an actual example of the interactions between identity-based-connection-pooling-enabled, oracle-proxy-session, and use-database-credentials. On the database side, the following objects are configured.- Database users scott; jdbcqa; jdbcqa3- Permission for proxy: alter user jdbcqa3 grant connect through jdbcqa;- Permission for proxy: alter user jdbcqa grant connect through jdbcqa; The following WebLogic Data Source objects are configured.- Users weblogic, wluser- Credential mapping “weblogic” to “scott”- Credential mapping "wluser" to "jdbcqa3"- Data source descriptor configured with user “jdbcqa”- All tests are run with Set Client ID set to true (more about that below).- All tests are run with oracle-proxy-session set to false (more about that below). The test program:- Runs in servlet- Authenticates to WLS as user “weblogic” Use DB Credentials Identity based getConnection(scott,***) getConnection(weblogic,***) getConnection(jdbcqa3,***) getConnection()  true  true Identity scottClient weblogicProxy null weblogic fails - not a db user User jdbcqa3Client weblogicProxy null Default user jdbcqaClient weblogicProxy null  false  true scott fails - not a WLS user User scottClient scottProxy null jdbcqa3 fails - not a WLS user User scottClient scottProxy null  true  false Proxy for scott fails weblogic fails - not a db user User jdbcqa3Client weblogicProxy jdbcqa Default user jdbcqaClient weblogicProxy null  false  false scott fails - not a WLS user Default user jdbcqaClient scottProxy null jdbcqa3 fails - not a WLS user Default user jdbcqaClient scottProxy null If Set Client ID is set to false, all cases would have Client set to null. If this was not an Oracle thin driver, the one case with the non-null Proxy in the above table would throw an exception because proxy session is only supported, implicitly or explicitly, with the Oracle thin driver. When oracle-proxy-session is set to true, the only cases that will pass (with a proxy of "jdbcqa") are the following.1. Setting use-database-credentials to true and doing getConnection(jdbcqa3,…) or getConnection().2. Setting use-database-credentials to false and doing getConnection(wluser, …) or getConnection(). Summary There are many options to choose from for data source security.  Considerations include the number and volatility of WLS and Database users, the granularity of data access, the depth of the security identity (property on the connection or a real user), performance, coordination of various components in the software stack, and driver capabilities.  Now that you have the big picture (remember that table in part 1), you can make a more informed choice.

  Read the article

• Tip: Keeping the ADF Mobile PDF Guide up to date

  - by Chris Muir

  This is a little tip for customers using Oracle's ADF Mobile. If you're like me, it's possible you don't rely on the online HTML version of the Mobile Developer's Guide for ADF, but rather download a PDF version of the file to use locally (look to the "PDF" link to the top right of the guide).  For me the convenience of the PDF is it's faster, I can search the whole document easily, I can split read the document across two pages on my home monitor, if I lose my internet connection the document is still available, and it's easy to read on my iPad (especially on long haul flights to the US across the Pacific where there is no internet connection!). The trigger point for me to download the Oracle PDF documentation has always been on a new point release of JDeveloper.  However in the case of ADF Mobile, as an extension to JDeveloper it is releasing at a much faster and independent schedule to JDeveloper and this includes updates to the documentation. As such the 11.1.2.4.0 ADF Mobile PDF guide you have locally might be out of date and you should take the opportunity to download the latest version.  This is also particularly important for ADF Mobile as not only are many new features being added for each release and included in the new documentation, but the guide is under rapid improvement to clarify much of what has been written to date.  Our documentation teams are super responsive to suggestions on how to improve the guides and this often shows per point release. How do you tell you've the latest guide? Look to the document part number which right now is "E24475-03".  This is a unique ID per release for the document, the first part being the document number, and the part after the dash the revision number.  If the website document number has a higher revision number, time to download a new up to date PDF. One last thing to share, you can follow the ADF Mobile guide document manager Brian Duffield on Twitter to keep abreast of updates. Image courtesy of Stuart Miles / FreeDigitalPhotos.net

  Read the article

• Where should I go to learn about networking? [closed]

  - by Ollie Saunders

  I wonder if anyone could recommend resource or resources such as a good book that: explains how all the important protocols work and interact. I’m interested in those that are relevant in a typical home network and used over the Internet explains in detail how ADSL Internet connections work to the level of depth necessary so that I’m able to tweak and measure performance settings starts from the beginning but attempts to provide proper understanding rather than idiot-oriented steps to follow Basically, I’m interested in how these technologies work and tend to be implemented in hardware and software rather than “here’s what to do if…” I’m interested in Computer Networking by Andrew S. Tanenbaum and I wonder if anyone else has any experience with that title. It’s expensive but I could probably loan a copy for £3 from the library or so.

  Read the article

• Can't ping self

  - by Paddy

  I have a wireless internet connection setup on my Mac. (v10.5.6) Am connected to the internet and everything is running smoothly. I recently discovered a quirky behaviour while setting up apache web server. When i typed in my dynamic ip (http://117.254.149.11/) in the webbrowser to visit my site pages it just timed out. In terminal i tried pinging localhost and it worked. $ ping localhost PING localhost (127.0.0.1): 56 data bytes 64 bytes from 127.0.0.1: icmp_seq=0 ttl=64 time=0.063 ms 64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.056 ms 64 bytes from 127.0.0.1: icmp_seq=2 ttl=64 time=0.044 ms But if i pinged my ip it would just time out. $ ping 117.254.149.11 PING 117.254.149.11 (117.254.149.11): 56 data bytes ^C --- 117.254.149.11 ping statistics --- 10 packets transmitted, 0 packets received, 100% packet loss Pinging any other site works though. I am completely stumped. Any help would be greatly appreciated.

  Read the article

• Reverse proxy using hop and RDP

  - by Sergei

  I am trying to connect from Vista to XP using RDP via reverse proxy using putty and an intermidiate host. There are myriad articles on the internet how to do it using vnc, ssh servers, winsshd, etc, but I can't find anything that helps me in this specific case. What I have: Windows XP host behind the firewall - 'destination' linux host running ssh on the internet - 'intermediate' windows host behind the firewall - 'source' All I want to do is open reverse tunnel from destination to intermidiate and use this tunnel for connecting back from the source. That should be simple to setup, however I just cannot make it. This is what I do: On 'destination', open putty session, create tunnel to 'intermediate' using following settings: source port 3389, destination is 'source:33389', direction is local On 'source', open putty session, create tunnel to 'intermediate'using following settings: source port 33389, destination is 'destination:33389', direction is local Finally, on source, open termnal services client and connect it to localhost:33389.Unfortunately it seems like packets do go somewhere but eventually client times out. Am I totally misunderstanding the concept? Please help!

  Read the article

• Horse Drawn Fiber Optics Bring Broadband to Remote Areas

  - by Jason Fitzpatrick

  When you think of fiber optics and high speed internet the last thing you likely think of is… horses. Yet horses have been put to use rolling out fiber optics to remote rural locations. In Vermont a Belgium draft horse named Fred, seen in the photo above being tended by his handler Claude, is a distinctly 19th century solution to a 21st century problem; how to run fiber optic cable through remote areas where trucks cannot easily pass. The man and animal are indispensable to cable and phone-service provider FairPoint Communications because they easily can access hard-to-reach job sites along country roads, which bulky utility trucks often cannot. “It just saves so much work – it would take probably 15 guys to do what Fred and Claude can do,” said Paul Clancy, foreman of a line crew from FairPoint. “They can pull 5,000 feet of cable with no sweat.” You can read more about the use of draft horses to draw lines and the roll out of broadband to rural Vermont at the link below. Vermont Uses Draft Horse to Lay Cables for Internet Access [Reuters] How To Encrypt Your Cloud-Based Drive with BoxcryptorHTG Explains: Photography with Film-Based CamerasHow to Clean Your Dirty Smartphone (Without Breaking Something)

  Read the article

• Host a subdomain from an IIS7 server on another server

  - by brennanmur

  I am running a network with two server, one running SBS 2008 which hosts a majority of the network services (DNS, DHCP, Exchange, IIS, DC, AD...), including the primary webpage at mydomain.com. The other server is a linux box running an apache web server. I'm trying to set the apache server to host the site site2.mydomain.com. I have changed the DNS settings on the first server so that site2.mydomain.com can be accessed from the internal network, but I cannot access site2.mydomain.com from the internet. I have tried using server farms and application request routing cache, as described on this page, http://forums.iis.net/t/1156458.aspx, but I still can't access site2.mydomain.com from the internet. I don't have much experience with web servers, I usually just administer local networks, so I'm not sure if I'm going about this the right way. Any help or suggestions would be much appreciated.

  Read the article

• Virtual Hosting in RHEL5

  - by Kumar P

  We having RHEL5 linux server with few windows xp clients. We providing web development in php. Now my developers as for common local php server for keep their projects in same place. Currently proxy server and samba sharing are running in RHEL5 server. I installed httpd,php,MySQL in server. And i would like to configure virtual hosting too for LAN. What i want do for it ? In server we have 2 Ethernet ports, 1 for local connection and another one for Internet. Internet provided by ADSL provider. (192.168.0.0 series for ADSL modem connection and 10.1.1.0 for LAN connection. If i want to use virtual hosting , am i want to setup local DNS server ? My requirements are, setup php with mySQL server for Local clients with multiple hosting , without disturbing proxy and samba. Help me to solve it.

  Read the article

• samsung pc studio not install on ubuntu

  - by subhash

  i want to install samsung pc studio for make a internet connection via GPRS on ubuntu 9.10 but without this software it is not possible so give me suggestion

  Read the article

• Any website/software where I can add some text rows on daily basis

  - by Moorage

  I have few notes or text like few remembering lines on daily or weekly basis. I want to write it. but i should be able to see at any backdate /monthly or yearly. The date-time should also be stored when i enter text. is it possible EDIT: I will explain clearly what i exactly want. Suppose while working on internet 1)i find "ABC is good for BCD". now i want to add that text to some online site where i can see later 2)Now i can add those type of things any time and on internet i can see that in tabular form like click to see montly list , yearly or weekly 3)Other thing is i should be able to add text as easy as possible like in firefox if i can press some shotcut and enter something and it gets added there rather than opening the site and then write The to do list do that sort of thing but they dont have creation date , rather they filter based on due date.

  Read the article

• Cannot assign port 4 to WAN on TP-Link WR740N by DD-WRT wiki

  - by Victor Sergienko

  I'm following the DD-WRT instruction to get TP-Link WR740N v3's Port 4 on a different VLAN, but this doesn't happen. First, I have no "Setup VLANs" settinngs tab in DD-WRT v24-sp2 (07/20/12) std r19519. I can get Internet on Wi-Fi if assigning eth1 to "WAN Port", but then all Ethernet ports get on the same VLAN and any wired connection grabs the DHCP address and Internet connection from router. When following the "old" instruction, if I run, say, nvram set vlan2ports="2 5*", should there appear a new interface, vlan2, in ifconfig, after ifconfig vlan2 up? It doesn't - does it mean there is no support for different VLANs in my software/hardware? What am I missing? Is it impossible to create more VLANs on TP-Link740?

  Read the article

• Loss of wireless network connectivity when playing video via HDMI cable

  - by Jeff Fohl

  Hi Folks - New to Super User, so I hope this question fits in with the guidelines. Very strange problem I am having, and I am at a loss as to how to continue troubleshooting this one. The basic problem is that when I attempt to watch streamed video on a particular display device (an Optoma HD180 projector), my network connectivity drops like a stone to barely measurable levels. This is my setup: I have a Dell H2C 730x running Windows 7 64bit. This particular computer has two ATI Radeon HD 4800 video cards. I have two Samsung 22" monitors connected to one card, and an Optoma HD180 digital projector connected to the other card via an HDMI cable. My internet connection is normally a reliable 6Mbps. The problem I am having occurs when I stream video (or even just browse the web) on the Optoma Projector. When I do this, my internet connection drops to practically zero (just a few kilobits per second). When I move the browser away from the projector, and over to one of my Samsung monitors, the internet connection comes right back. Note that the Optoma projector is on and enabled as a third monitor all this time. I can move the mouse around on the projector without triggering the problem. I tried pinging my router when I was playing a movie on one of the monitors, and I get a 1 millisecond response. However, when I have the movie playing on the Optoma projecter, pinging the router gives me response times in the hundreds of milliseconds, or times out completely. So, it clearly is something local to my machine - and not some sort of throttling occurring down the line. I would think that it is possibly something to do with the HDMI driver conflicting somehow with my network driver (which is a USB-based wireless connection). This one has me really stumped. Anyone have any ideas? EDIT: I am now leaning towards the possibility that the HDMI cable is somehow interfering with the wireless network, when large amounts of data are being pushed through the cable. Is this possible?

  Read the article

• Putting DSMD into Remission

  - by Justin Greenwood

  As a programmer with over ten years of professional experience, I've often suffered from DSMD (distraction surplus/motivation deficit) disorder. I know I'm not alone. Many of my colleagues have shared their experiences with this productivity cancer to me in support groups or in moments of inebriated intimacy. Often, I observe friends unknowingly surrendering to it - sitting at their computer, cycling through the same set of web sites (blogs, facebook, youtube, news providers, wikipeida, etc.), over and over again. Intermittently, they get up, take a walk around the office, make small talk with their colleagues, get another cup of coffee, then sit down and start the cycle all over again. It is completely controlled by the subconscious mind and will destroy your ability to get into that groove you used to live in back in your better days. Programming requires extended periods of focused attention, and this type of behavior will really kill productivity and in the end, when deadlines are near, launch your stress level to near emotional breakdown levels.DiagnosisThe best way to diagnose infection is to completely disconnect your devices from the internet while working. If you find yourself launching web browsers every minute or so, then you're down with the sickness.TreatmentA few techniques I've found that will help send this ailment into regression are as follows:Segment your day into two to three hour work segments. For example: 9:00-11:00, 1:00-3:00, 3:30-5:00.Define a few small one to two hour tasks you want to accomplish in your day. Assign each of those tasks to one of the short work segments.If possible, turn off the internet and any other distractions during these work segments (at least until you regain control of your browsing habits) - this includes instant messaging and email. You can check your email and waste time surfing in the hours between work segments.Reward yourself on productive days with a beer or whatever butters your muffins.

  Read the article

• help download and install and save and use my wireless stick modem and software

  - by ADAM

  i installed Linux Ubuntu after my win os went totally dead by fatal blue screen. cannot reboot or install form CD ROM or get safe mode i installed Linux Ubuntu i still unable to install my wireless stick usb modem to connect and surf the Internet wireless form my provider. i use wireless network from neighborhood And i find it difficult to download and install and save porg and application from the INTERNET like skype and real player and others. it is different form windows and not that easy to use. i click to download for example and find real player but when click on it it opens as text file only and i cannot use it as it should be used for video and download and record from you tube. how to do it. and is there with Linux Ubuntu similar prog to download and record and save from you tube as in windows? Is there any trick to restart or reboot windows OS from the dead. can i use linux to reboot windows or to import my files from the blue screen stopped windows7? Any help is highly appreciated. thanks please email me to : [email protected]

  Read the article

• Time out while mounting samba share

  - by nullDev

  I am trying to mount a hard-disk connected to my WDTV Live box. The following command smbclient -L 192.168.1.2 -U guest gives the following output: Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.5.1] Sharename Type Comment --------- ---- ------- Expansion_Drive Disk Expansion_Drive MICROVAULT Disk MICROVAULT IPC$ IPC IPC Service (WDTV LIVE) Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.5.1] Server Comment --------- ------- WDTVLIVE WDTV LIVE Workgroup Master --------- ------- WORKGROUP But if I try sudo smbmount //WDTVLIVE/Expansion_Drive /home/ashish/wdtvlive/ -o guest,rw I get the following: Warning: mapping 'guest' to 'guest,sec=none' mount error(110): Connection timed out Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) I am able to browse and mount through Nautilus as well, but I dont want the drive to be mounted at gvfs.

  Read the article

• Mac OS X: pushing all traffic through a VMWare VM

  - by bj99

  I want to set up an Astaro (Sophos) UTM in a Virtual Machine. The Setup should be at the end the following: Cable Modem (one IP adress) | [Ethernet] Sophos UTM (running as VM [VMWare Fusion 5] on the MacMini) | [WIFI] Airport Express v2 (for sharing Local Network to wireless and wired clients) 1)| [WIFI] 2)| [Ethernet over Thunderbolt Ethernet Adapter]* Clients MacMini (Local File Server) *To have the Mini also protected behind the UTM So the setup process for the UTM works fine, but then the problems start: I just have one external IP (from my cable modem provider)== So if I put the VM in briged mode my Internet connection drops, because the MacMini also has its IP adress. If I put the VM to NAT mode the Mini itself is not protected by the UTM So: is there a way to hide the en0 interface(Ethernet) and the en1 interface (Wifi) from the MacMini, so that they not even appear in System Preferences Network section but are available to the VM? That way the Mini must connect to the en2 interface (Thunderbolt adapter) to make any Internet/LAN connection and I just use the given single IP from the Cable Modem. Thaks for any suggestions... Sebastian

  Read the article

• BGP Router reccomendations for simple redundancy [closed]

  - by Jona

  We have two sites that each have an internet connection and have a dedicated dark fibre between them. Each site has it's own IP space and we have an AS number. We're looking to be resilient to failure of the internet connection to either site and so need to buy a pair of approriate routers. Requirements are: Able to run 2 bgp sessions (one with the ISP, one with the other site router) Option to take a full table from the upstream ISPs would be nice. Able to provide HA gateways on the LAN side (e.g. 192.168.0.254 will automatically migrate if it's host router lost power) A dedicated device rather than a server running Linux / BSD Not crazy expensive. Any help / advice much appreciated.

  Read the article

• Ubuntu on Thinkpad Edge 11

  - by lasseespeholt

  Hi, I think a community wiki on problems (and solutions) when installing Ubuntu (10.10) on a Thinkpad Edge 11 would be nice (because I just got one ;)). I'll contribute with my own problems and solutions, and hope others will join too. Thinkwiki entry for the Edge 11 Known problems: No wifi-driver, solution: answer #1, answer #2 Fan is load, even though it's on auto. No solution. Thinkfan is a possible solution, but correction values for sensors should be supplied (mapping sensors to specific areas). Also, one sensor is between -100C and +100C - maybe some kind of deactivation would help.

  Read the article

< Previous Page | 471 472 473 474 475 476 477 478 479 480 481 482  | Next Page >