add service reference - Page 477

Add a small RAID card? Will it help overall stability and performance of my nine hard drives?

- by Ray

Hi, Will I get any extra genuine added performance and RAID stability if I insert a basic RAID card into a PCI-E x1 slot? I am considering the Adaptec 1220SA - 2 port SATA , pci-express (1x) , raid 0/1. Ok it only supports two SATA drives. Purpose is to help support the eight internal hard drives (1TB each), a DVD drive and an external e-SATA connected 2TB hard drive - by dealing with two of the internal hard drives. My current configuration of eight internal 1TB Barracuda (7200.12) SATA hard drives, one external 2TB SATA Western Digital Green Drive (e-SATA) and one DVD drive can already be supported by the Intel P55 & JMicron controllers on the ASUS motherboard : the Intel P55 (controls six HDD; configured as three x RAID 1), and the JMicron (controls two HDD as one RAID 1, as well as the DVD drive and the external SATA drive via the motherboard's e-SATA port (controlled by the JMicron)). Bigger picture details : I have an ASUS motherboard designed for the LGA1156 type processor and it includes the Intel P55 Express Chipset and JMicron. I am using the Intel Core i7-870 processor, and have 8GB DDR3 (1333) memory (four x 2GB Corsair DIMMs). Enough overall power. The power supply is more than sufficicient for the system. Corsair AX850. The system will never need the full 850 watts (future : second graphics card). The RAID card would provide hardware RAID 1 for two of the eight intrnal drives. It would either reduce the load on : the Intel P55 firmware RAID support, or replace the JMicron controller's RAID 1 set. I am busy installing the above configuration using Windows 7 Ultimate 64-bit as the OS. The RAID card is a last minute addition to the plan. Is it worth spending the extra R700 - R900 on the Adaptec 1220SA, or equivalent RAID card? I cannot afford to spend yet another R2000 - R3000 on a RAID card that would support many SATA2 hard drives, with a better RAID, example the RAID 5. My Issue & assumption : I am trusting that the Intel P55 chipset can properly handle six drives, configured as three * RAID 1. I am assuming that the JMicron can handle, using its RED SATA ports, one RAID-1 (two HDDs). The DVD drive connects to the JMicron optical SATA port 1 (white port 1). White port 2 is not used. The e-SATA connection is from the JMicron straight to, and through the motherboard - to an on-board (rear panel) e-SATA port. Am I being a little hopeful in only using the on-board Intel P55 and the JMicron? Is it a waste of money to install a RAID card that handles two SATA2 drives? OR Is it wisdom to take the pressure a little off the Intel P55? Obviously I am interested in data security, hence RAID 1, not RAID Zero. RAID 5 would be nice. The CPU, Intel Core i7-870 will provide the clout. Context to nine drives : I am using virtualisation with Windows 7 Ultimate. Bootable VMs. The operating system gets a mirror. Loaded apps gets a mirror. The current design data is kept in another mirror and Another mirror is back-up one and / or VM territory. Then the external 2TB drive (via e-SATA) is the next layer of data security and then finally, I use off-site data security. Thanks.

Read the article

Generic Http Module

- by MartinF

The problem I am trying to make a generic http module in asp.net C# for handling roles defined by an enum which i want to be able to change by a generic parameter. This will make it possible to use the generic module with any kind of enum defined for each project. The module hooks into the Authenticate event of the FormsAuthenticationModule, and is called on each request to the website. The module exposes public events which could be defined in the global.asax. But i cant seem to figure out how to make the generic http module work like a non generic module. There is 3 main problems. I cant register the generic http module in the web.config like any other module as i cant specify the generic parameter, or is possible somehow ? The way to solve that as far as i can figure out is to create a non-generic http module that intializes the generic HttpModule (the generic parameter is defined in a custom section for the module in the web.config). But that introduces the next problem. I cant find out how to make the public events exposed by the generic module available to hook into through the global.asax as you would normally do with a non-generic module by just making a public method with the name like ModuleClassName_PublicEventName. The init() method on the http module gets an reference to the HttpApplication object created in the global.asax. I dont know if it somehow could be possible with reflection to search for the methods and if they are defined in the global.asax (HttpApplication super class) hook them up with the correct event handler ? or if any methods on the HttpApplication object can be used? How would i store and later get a reference to the generic module created in the non-generic module ? I can get the non-generic module with HttpContext.Current.ApplicationInstance.Modules.Get("TheModule"); but is there any way i can store a reference to the generic module in the non-generic module (cant figure out how it should be possible), or store it somewhere else so i can always get it? If I can get a reference to the generic module from the global.asax etc. the events mentioned in nr. 2 can be manually wired to the methods. Thoughts and other possible solutions Instead of registering the module in the web.config it can be manually initialized by overridding the Init method of the HttpApplication and calling the Init method on the module. But that will introduce some new problems. The module will no longer be added to the the ModulesCollection. So I will need to store a reference somewhere else. This could be done with a property in the global.asax, and by implementing an interface, or by creating an generic abstract base type inheriting from HttpApplication, that the global.asax could inherit from. In the generic abstract base type i could also override the init method. It will still not automatically hook up methods in the global.asax with events in the generic module. If it is possible with reflection to search for defined methods in the super type of the HttpApplication it could be automatically done that way. But i can wire the methods in the global.asax with the events in the generic module manually either in the Init method or anywhere else by getting reference to the generic module. It doesnst really need to implement the IHttpModule interface if i choose to manually initalize the generic module. I could just aswell move all the code to the abstract base type inheriting from the HttpApplication. I would prefer to register the module simply by defining it in the web.config as it will be the easiest and most natural / logical solution. Also it would be great if it could be kept as a HttpModule instead of having to define a an abstract base type inheriting from HttpApplication, else it will be more thighed up and not as loose and plugable as i wanted it to be (but maybe it is not possible). Another alternative would be to make it all static. As far as i can figure out i would have to somehow make sure that only one method can be added to the public static events, so it wont add a reference each time a new instance of the global.asax is created. I simply cant find out what is the best solution. I have been messing around with this and thinking about it for days now. Maybe there is an option that i havent thought of ? Hope anyone out there can help me.

Read the article

problem with revalidating a jframe.

- by John Quesie

I have this code which should take the radio button input do a little math and display a popup. which it does fine. but then it is supposed to re validate and ask the next question. when i get to the second question, the answer always comes out as the isSelected(true) value no matter which radio button you click on. SO to be clear the first time through it works fin but when the second question comes up, it just takes the default radio button every time. public class EventHandler implements ActionListener { private Main gui; public EventHandler(Main gui){ this.gui = gui; } public void actionPerformed(ActionEvent e){ String answer = ""; double val = 1; //get current answer set String [] anArr = gui.getAnswers(gui.currentStage, gui.currentQuestion); if(e.getSource() == gui.exit){ System.exit(0); } if(e.getSource() == gui.submit){ if(gui.a1.isSelected()){ answer = anArr[0]; val = gui.getScore(1); } if(gui.a2.isSelected()){ answer = anArr[1]; val = gui.getScore(2); } if(gui.a3.isSelected()){ answer = anArr[2]; val = gui.getScore(3); } if(gui.a4.isSelected()){ answer = anArr[3];; val = gui.getScore(4); } JOptionPane.showMessageDialog(null, popupMessage(answer, val), "Your Answer", 1); //compute answer here //figure out what next question is to send gui.moveOn(); gui.setQA(gui.currentStage, gui.currentQuestion); //resets gui gui.goWest(); gui.q.revalidate(); } } public String popupMessage(String ans, double val){ //displays popup after an answer has been choosen gui.computeScore(val); String text = " You Answered " + ans + " Your score is now " + gui.yourScore ; return text; } } public class Main extends JFrame { public JLabel question; public JButton exit; public JButton submit; public JRadioButton a1; public JRadioButton a2; public JRadioButton a3; public JRadioButton a4; public ButtonGroup bg; public double yourScore = 1; public int currentQuestion = 1; public String currentStage = "startup"; JPanel q; public Main(){ setTitle("Ehtics Builder"); setLocation(400,400); setLayout(new BorderLayout(5,5)); setQA("startup", 1); goNorth(); goEast(); goWest(); goSouth(); goCenter(); pack(); setVisible(true); setDefaultCloseOperation(EXIT_ON_CLOSE); } public void goNorth(){ } public void goWest(){ q = new JPanel(); q.setLayout(new GridLayout(0,1)); q.add(question); bg.add(a1); bg.add(a2); bg.add(a3); bg.add(a4); a1.setSelected(true); q.add(a1); q.add(a2); q.add(a3); q.add(a4); add(q, BorderLayout.WEST); System.out.println(); } public void goEast(){ } public void goSouth(){ JPanel p = new JPanel(); p.setLayout(new FlowLayout(FlowLayout.CENTER)); exit = new JButton("Exit"); submit = new JButton("Submit"); p.add(exit); p.add(submit); add(p, BorderLayout.SOUTH); EventHandler myEventHandler = new EventHandler(this); exit.addActionListener(myEventHandler); submit.addActionListener(myEventHandler); } public void goCenter(){ } public static void main(String[] args) { Main open = new Main(); } public String getQuestion(String type, int num){ //reads the questions from a file String question = ""; String filename = ""; String [] ques; num = num - 1; if(type.equals("startup")){ filename = "startup.txt"; }else if(type.equals("small")){ filename = "small.txt"; }else if(type.equals("mid")){ filename = "mid.txt"; }else if(type.equals("large")){ filename = "large.txt"; }else{ question = "error"; return question; } ques = readFile(filename); for(int i = 0;i < ques.length;i++){ if(i == num){ question = ques[i]; } } return question; } public String [] getAnswers(String type, int num){ //reads the answers from a file String filename = ""; String temp = ""; String [] group; String [] ans; num = num - 1; if(type.equals("startup")){ filename = "startupA.txt"; }else if(type.equals("small")){ filename = "smallA.txt"; }else if(type.equals("mid")){ filename = "midA.txt"; }else if(type.equals("large")){ filename = "largeA.txt"; }else{ System.out.println("Error"); } group = readFile(filename); for(int i = 0;i < group.length;i++){ if(i == num){ temp = group[i]; } } ans = temp.split("-"); return ans; } public String [] getValues(String type, int num){ //reads the answers from a file String filename = ""; String temp = ""; String [] group; String [] vals; num = num - 1; if(type.equals("startup")){ filename = "startupV.txt"; }else if(type.equals("small")){ filename = "smallV.txt"; }else if(type.equals("mid")){ filename = "midV.txt"; }else if(type.equals("large")){ filename = "largeV.txt"; }else{ System.out.println("Error"); } group = readFile(filename); for(int i = 0;i < group.length;i++){ if(i == num){ temp = group[i]; } } vals = temp.split("-"); return vals; } public String [] readFile(String filename){ //reads the contentes of a file, for getQuestions and getAnswers String text = ""; int i = -1; FileReader in = null; File f = new File(filename); try{ in = new FileReader(f); }catch(FileNotFoundException e){ System.out.println("file does not exist"); } try{ while((i = in.read()) != -1) text += ((char)i); }catch(IOException e){ System.out.println("Error reading file"); } try{ in.close(); }catch(IOException e){ System.out.println("Error reading file"); } String [] questions = text.split(":"); return questions; } public void computeScore(double val){ //calculates you score times the value of your answer yourScore = val * yourScore; } public double getScore(int aNum){ //gets the score of an answer, stage and q number is already set in the class aNum = aNum - 1; double val = 0; double [] valArr = new double[4]; for(int i = 0;i < getValues(currentStage, currentQuestion).length;i++){ val = Double.parseDouble(getValues(currentStage, currentQuestion)[i]); valArr[i] = val; } if(aNum == 0){ val = valArr[0]; } if(aNum == 1){ val = valArr[1]; } if(aNum == 2){ val = valArr[2]; } if(aNum == 3){ val = valArr[3]; } // use current stage and questiion and trhe aNum to get the value for that answer return val; } public void nextQuestion(int num){ //sets next question to use currentQuestion = num; } public void nextStage(String sta){ // sets next stage to use currentStage = sta; } public void moveOn(){ // uses the score and current question and stage to determine wher to go next and what stage to use next nextQuestion(2); nextStage("startup"); } public void setQA(String level, int num){ String [] arr = getAnswers(level, num); question = new JLabel(getQuestion(level, num)); bg = new ButtonGroup(); a1 = new JRadioButton(arr[0]); a2 = new JRadioButton(arr[1]); a3 = new JRadioButton(arr[2]); a4 = new JRadioButton(arr[3]); } }

Read the article

I added a validation to one of my models, now Rails is telling me to add validation to the partial. Help!

- by marcamillion

This is the error I am getting: ArgumentError in Home#index Showing /app/views/clients/_form.html.erb where line #6 raised: You need to supply at least one validation Extracted source (around line #6): 3: render :partial => "clients/form", 4: :locals => {:client => client} 5: -%> 6: <% client ||= Client.new 7: new_client = client.new_record? %> 8: <%= form_for(client, :html => { :class=>"ajax-form", :id => "client-ajax-form"}, :remote => true, :disable_with => (new_client ? "Adding..." : "Saving...")) do |f| %> 9: <div class="validation-error" style="display:none"></div> My client model looks like this: class Client < ActiveRecord::Base # the user model for the client belongs_to :user has_many :projects, :order => 'created_at DESC', :dependent => :destroy #The following produces the designers for a particular client. #Get them from the relations where the current user is a client. has_one :ownership, :dependent => :destroy has_one :designer, :through => :ownership validates :name, :presence => true, :length => {:minimum => 1, :maximum => 128} validates :number_of_clients def number_of_clients Authorization.current_user.clients.count <= Authorization.current_user.plan.num_of_clients end end This is how the app/views/client/_form.html.erb partial looks: <%# Edit a single client render :partial => "clients/form", :locals => {:client => client} -%> <% client ||= Client.new new_client = client.new_record? %> <%= form_for(client, :html => { :class=>"ajax-form", :id => "client-ajax-form"}, :remote => true, :disable_with => (new_client ? "Adding..." : "Saving...")) do |f| %> <div class="validation-error" style="display:none"></div> <div> <label for="client_name"><span class="icon name-icon"> </span></label> <input type="text" class="name" size="20" name="client[name]" id="client_name" value="<%= client.name %>" > <%= f.submit(new_client ? "Add" : "Save", :class=> "green awesome")%> </div> <% end %> <% content_for(:deferred_js) do %> // From the Client Form $('#client-ajax-form') .bind("ajax:success", function(evt, data, status, xhr){ console.log("Calling Step View"); compv.updateStepView('client', xhr); }); <% end %> How do I fix that error ?

Read the article

Using an alternate JSON Serializer in ASP.NET Web API

- by Rick Strahl

The new ASP.NET Web API that Microsoft released alongside MVC 4.0 Beta last week is a great framework for building REST and AJAX APIs. I've been working with it for quite a while now and I really like the way it works and the complete set of features it provides 'in the box'. It's about time that Microsoft gets a decent API for building generic HTTP endpoints into the framework. DataContractJsonSerializer sucks As nice as Web API's overall design is one thing still sucks: The built-in JSON Serialization uses the DataContractJsonSerializer which is just too limiting for many scenarios. The biggest issues I have with it are: No support for untyped values (object, dynamic, Anonymous Types) MS AJAX style Date Formatting Ugly serialization formats for types like Dictionaries To me the most serious issue is dealing with serialization of untyped objects. I have number of applications with AJAX front ends that dynamically reformat data from business objects to fit a specific message format that certain UI components require. The most common scenario I have there are IEnumerable query results from a database with fields from the result set rearranged to fit the sometimes unconventional formats required for the UI components (like jqGrid for example). Creating custom types to fit these messages seems like overkill and projections using Linq makes this much easier to code up. Alas DataContractJsonSerializer doesn't support it. Neither does DataContractSerializer for XML output for that matter. What this means is that you can't do stuff like this in Web API out of the box:public object GetAnonymousType() { return new { name = "Rick", company = "West Wind", entered= DateTime.Now }; } Basically anything that doesn't have an explicit type DataContractJsonSerializer will not let you return. FWIW, the same is true for XmlSerializer which also doesn't work with non-typed values for serialization. The example above is obviously contrived with a hardcoded object graph, but it's not uncommon to get dynamic values returned from queries that have anonymous types for their result projections. Apparently there's a good possibility that Microsoft will ship Json.NET as part of Web API RTM release. Scott Hanselman confirmed this as a footnote in his JSON Dates post a few days ago. I've heard several other people from Microsoft confirm that Json.NET will be included and be the default JSON serializer, but no details yet in what capacity it will show up. Let's hope it ends up as the default in the box. Meanwhile this post will show you how you can use it today with the beta and get JSON that matches what you should see in the RTM version. What about JsonValue? To be fair Web API DOES include a new JsonValue/JsonObject/JsonArray type that allow you to address some of these scenarios. JsonValue is a new type in the System.Json assembly that can be used to build up an object graph based on a dictionary. It's actually a really cool implementation of a dynamic type that allows you to create an object graph and spit it out to JSON without having to create .NET type first. JsonValue can also receive a JSON string and parse it without having to actually load it into a .NET type (which is something that's been missing in the core framework). This is really useful if you get a JSON result from an arbitrary service and you don't want to explicitly create a mapping type for the data returned. For serialization you can create an object structure on the fly and pass it back as part of an Web API action method like this:public JsonValue GetJsonValue() { dynamic json = new JsonObject(); json.name = "Rick"; json.company = "West Wind"; json.entered = DateTime.Now; dynamic address = new JsonObject(); address.street = "32 Kaiea"; address.zip = "96779"; json.address = address; dynamic phones = new JsonArray(); json.phoneNumbers = phones; dynamic phone = new JsonObject(); phone.type = "Home"; phone.number = "808 123-1233"; phones.Add(phone); phone = new JsonObject(); phone.type = "Home"; phone.number = "808 123-1233"; phones.Add(phone); //var jsonString = json.ToString(); return json; } which produces the following output (formatted here for easier reading):{ name: "rick", company: "West Wind", entered: "2012-03-08T15:33:19.673-10:00", address: { street: "32 Kaiea", zip: "96779" }, phoneNumbers: [ { type: "Home", number: "808 123-1233" }, { type: "Mobile", number: "808 123-1234" }] } If you need to build a simple JSON type on the fly these types work great. But if you have an existing type - or worse a query result/list that's already formatted JsonValue et al. become a pain to work with. As far as I can see there's no way to just throw an object instance at JsonValue and have it convert into JsonValue dictionary. It's a manual process. Using alternate Serializers in Web API So, currently the default serializer in WebAPI is DataContractJsonSeriaizer and I don't like it. You may not either, but luckily you can swap the serializer fairly easily. If you'd rather use the JavaScriptSerializer built into System.Web.Extensions or Json.NET today, it's not too difficult to create a custom MediaTypeFormatter that uses these serializers and can replace or partially replace the native serializer. Here's a MediaTypeFormatter implementation using the ASP.NET JavaScriptSerializer:using System; using System.Net.Http.Formatting; using System.Threading.Tasks; using System.Web.Script.Serialization; using System.Json; using System.IO; namespace Westwind.Web.WebApi { public class JavaScriptSerializerFormatter : MediaTypeFormatter { public JavaScriptSerializerFormatter() { SupportedMediaTypes.Add(new System.Net.Http.Headers.MediaTypeHeaderValue("application/json")); } protected override bool CanWriteType(Type type) { // don't serialize JsonValue structure use default for that if (type == typeof(JsonValue) || type == typeof(JsonObject) || type== typeof(JsonArray) ) return false; return true; } protected override bool CanReadType(Type type) { if (type == typeof(IKeyValueModel)) return false; return true; } protected override System.Threading.Tasks.Taskobject OnReadFromStreamAsync(Type type, System.IO.Stream stream, System.Net.Http.Headers.HttpContentHeaders contentHeaders, FormatterContext formatterContext) { var task = Taskobject.Factory.StartNew(() = { var ser = new JavaScriptSerializer(); string json; using (var sr = new StreamReader(stream)) { json = sr.ReadToEnd(); sr.Close(); } object val = ser.Deserialize(json,type); return val; }); return task; } protected override System.Threading.Tasks.Task OnWriteToStreamAsync(Type type, object value, System.IO.Stream stream, System.Net.Http.Headers.HttpContentHeaders contentHeaders, FormatterContext formatterContext, System.Net.TransportContext transportContext) { var task = Task.Factory.StartNew( () = { var ser = new JavaScriptSerializer(); var json = ser.Serialize(value); byte[] buf = System.Text.Encoding.Default.GetBytes(json); stream.Write(buf,0,buf.Length); stream.Flush(); }); return task; } } } Formatter implementation is pretty simple: You override 4 methods to tell which types you can handle and then handle the input or output streams to create/parse the JSON data. Note that when creating output you want to take care to still allow JsonValue/JsonObject/JsonArray types to be handled by the default serializer so those objects serialize properly - if you let either JavaScriptSerializer or JSON.NET handle them they'd try to render the dictionaries which is very undesirable. If you'd rather use Json.NET here's the JSON.NET version of the formatter:// this code requires a reference to JSON.NET in your project #if true using System; using System.Net.Http.Formatting; using System.Threading.Tasks; using System.Web.Script.Serialization; using System.Json; using Newtonsoft.Json; using System.IO; using Newtonsoft.Json.Converters; namespace Westwind.Web.WebApi { public class JsonNetFormatter : MediaTypeFormatter { public JsonNetFormatter() { SupportedMediaTypes.Add(new System.Net.Http.Headers.MediaTypeHeaderValue("application/json")); } protected override bool CanWriteType(Type type) { // don't serialize JsonValue structure use default for that if (type == typeof(JsonValue) || type == typeof(JsonObject) || type == typeof(JsonArray)) return false; return true; } protected override bool CanReadType(Type type) { if (type == typeof(IKeyValueModel)) return false; return true; } protected override System.Threading.Tasks.Taskobject OnReadFromStreamAsync(Type type, System.IO.Stream stream, System.Net.Http.Headers.HttpContentHeaders contentHeaders, FormatterContext formatterContext) { var task = Taskobject.Factory.StartNew(() = { var settings = new JsonSerializerSettings() { NullValueHandling = NullValueHandling.Ignore, }; var sr = new StreamReader(stream); var jreader = new JsonTextReader(sr); var ser = new JsonSerializer(); ser.Converters.Add(new IsoDateTimeConverter()); object val = ser.Deserialize(jreader, type); return val; }); return task; } protected override System.Threading.Tasks.Task OnWriteToStreamAsync(Type type, object value, System.IO.Stream stream, System.Net.Http.Headers.HttpContentHeaders contentHeaders, FormatterContext formatterContext, System.Net.TransportContext transportContext) { var task = Task.Factory.StartNew( () = { var settings = new JsonSerializerSettings() { NullValueHandling = NullValueHandling.Ignore, }; string json = JsonConvert.SerializeObject(value, Formatting.Indented, new JsonConverter[1] { new IsoDateTimeConverter() } ); byte[] buf = System.Text.Encoding.Default.GetBytes(json); stream.Write(buf,0,buf.Length); stream.Flush(); }); return task; } } } #endif One advantage of the Json.NET serializer is that you can specify a few options on how things are formatted and handled. You get null value handling and you can plug in the IsoDateTimeConverter which is nice to product proper ISO dates that I would expect any Json serializer to output these days. Hooking up the Formatters Once you've created the custom formatters you need to enable them for your Web API application. To do this use the GlobalConfiguration.Configuration object and add the formatter to the Formatters collection. Here's what this looks like hooked up from Application_Start in a Web project:protected void Application_Start(object sender, EventArgs e) { // Action based routing (used for RPC calls) RouteTable.Routes.MapHttpRoute( name: "StockApi", routeTemplate: "stocks/{action}/{symbol}", defaults: new { symbol = RouteParameter.Optional, controller = "StockApi" } ); // WebApi Configuration to hook up formatters and message handlers // optional RegisterApis(GlobalConfiguration.Configuration); } public static void RegisterApis(HttpConfiguration config) { // Add JavaScriptSerializer formatter instead - add at top to make default //config.Formatters.Insert(0, new JavaScriptSerializerFormatter()); // Add Json.net formatter - add at the top so it fires first! // This leaves the old one in place so JsonValue/JsonObject/JsonArray still are handled config.Formatters.Insert(0, new JsonNetFormatter()); } One thing to remember here is the GlobalConfiguration object which is Web API's static configuration instance. I think this thing is seriously misnamed given that GlobalConfiguration could stand for anything and so is hard to discover if you don't know what you're looking for. How about WebApiConfiguration or something more descriptive? Anyway, once you know what it is you can use the Formatters collection to insert your custom formatter. Note that I insert my formatter at the top of the list so it takes precedence over the default formatter. I also am not removing the old formatter because I still want JsonValue/JsonObject/JsonArray to be handled by the default serialization mechanism. Since they process in sequence and I exclude processing for these types JsonValue et al. still get properly serialized/deserialized. Summary Currently DataContractJsonSerializer in Web API is a pain, but at least we have the ability with relatively limited effort to replace the MediaTypeFormatter and plug in our own JSON serializer. This is useful for many scenarios - if you have existing client applications that used MVC JsonResult or ASP.NET AJAX results from ASMX AJAX services you can plug in the JavaScript serializer and get exactly the same serializer you used in the past so your results will be the same and don't potentially break clients. JSON serializers do vary a bit in how they serialize some of the more complex types (like Dictionaries and dates for example) and so if you're migrating it might be helpful to ensure your client code doesn't break when you switch to ASP.NET Web API. Going forward it looks like Microsoft is planning on plugging in Json.Net into Web API and make that the default. I think that's an awesome choice since Json.net has been around forever, is fast and easy to use and provides a ton of functionality as part of this great library. I just wish Microsoft would have figured this out sooner instead of now at the last minute integrating with it especially given that Json.Net has a similar set of lower level JSON objects JsonValue/JsonObject etc. which now will end up being duplicated by the native System.Json stuff. It's not like we don't already have enough confusion regarding which JSON serializer to use (JavaScriptSerializer, DataContractJsonSerializer, JsonValue/JsonObject/JsonArray and now Json.net). For years I've been using my own JSON serializer because the built in choices are both limited. However, with an official encorsement of Json.Net I'm happily moving on to use that in my applications. Let's see and hope Microsoft gets this right before ASP.NET Web API goes gold.© Rick Strahl, West Wind Technologies, 2005-2012Posted in Web Api AJAX ASP.NET Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article

Tools and Utilities for the .NET Developer

- by mbcrump

Tweet this list! Add a link to my site to your bookmarks to quickly find this page again! Add me to twitter! This is a list of the tools/utilities that I use to do my job/hobby. I wanted this page to load fast and contain information that only you care about. If I have missed a tool that you like, feel free to contact me and I will add it to the list. Also, this list took a lot of time to complete. Please do not steal my work, if you like the page then please link back to my site. I will keep the links/information updated as new tools/utilities are created. Windows/.NET Development – This is a list of tools that any Windows/.NET developer should have in his bag. I have used at some point in my career everything listed on this page and below is the tools worth keeping. Name Description License AnkhSVN Subversion support for Visual Studio. It also works with VS2010. Free Aurora XAML Designer One of the best XAML creation tools available. Has a ton of built in templates that you can copy/paste into VS2010. COST/Trial BeyondCompare Beyond Compare 3 is the ideal tool for comparing files and folders on your Windows or Linux system. Visualize changes in your code and carefully reconcile them. COST/Trial BuildIT Automated Task Tool Its main purpose is to automate tasks, whether it is the final packaging of a product, an automated daily build, maybe sending out a mailing list, even backing-up files. Free C Sharper for VB Convert VB to C#. COST CLRProfiler Analyze and improve the behavior of your .NET app. Free CodeRush Direct competitor to ReSharper, contains similar feature. This is one of those decide for yourself. COST/Trial Disk2VHD Disk2vhd is a utility that creates VHD (Virtual Hard Disk - Microsoft's Virtual Machine disk format) versions of physical disks for use in Microsoft Virtual PC or Microsoft Hyper-V virtual machines (VMs). Free Eazfuscator.NET Is a free obfuscator for .NET. The main purpose is to protect intellectual property of software. Free EQATEC Profiler Make your .NET app run faster. No source code changes are needed. Just point the profiler to your app, run the modified code, and get a visual report. COST Expression Studio 3/4 Comes with Web, Blend, Sketch Flow and more. You can create websites, produce beautiful XAML and more. COST/Trial Expresso The award-winning Expresso editor is equally suitable as a teaching tool for the beginning user of regular expressions or as a full-featured development environment for the experienced programmer or web designer with an extensive knowledge of regular expressions. Free Fiddler Fiddler is a web debugging proxy which logs all HTTP(s) traffic between your computer and the internet. Free Firebug Powerful Web development tool. If you build websites, you will need this. Free FxCop FxCop is an application that analyzes managed code assemblies (code that targets the .NET Framework common language runtime) and reports information about the assemblies, such as possible design, localization, performance, and security improvements. Free GAC Browser and Remover Easy way to remove multiple assemblies from the GAC. Assemblies registered by programs like Install Shield can also be removed. Free GAC Util The Global Assembly Cache tool allows you to view and manipulate the contents of the global assembly cache and download cache. Free HelpScribble Help Scribble is a full-featured, easy-to-use help authoring tool for creating help files from start to finish. You can create Win Help (.hlp) files, HTML Help (.chm) files, a printed manual and online documentation (on a web site) all from the same Help Scribble project. COST/Trial IETester IETester is a free Web Browser that allows you to have the rendering and JavaScript engines of IE9 preview, IE8, IE7 IE 6 and IE5.5 on Windows 7, Vista and XP, as well as the installed IE in the same process. Free iTextSharp iText# (iTextSharp) is a port of the iText open source java library for PDF generation written entirely in C# for the .NET platform. Use the iText mailing list to get support. Free Kaxaml Kaxaml is a lightweight XAML editor that gives you a "split view" so you can see both your XAML and your rendered content. Free LINQPad LinqPad lets you interactively query databases in a LINQ. Free Linquer Many programmers are familiar with SQL and will need a help in the transition to LINQ. Sometimes there are complicated queries to be written and Linqer can help by converting SQL scripts to LINQ. COST/Trial LiquidXML Liquid XML Studio 2010 is an advanced XML developers toolkit and IDE, containing all the tools needed for designing and developing XML schema and applications. COST/Trial Log4Net log4net is a tool to help the programmer output log statements to a variety of output targets. log4net is a port of the excellent log4j framework to the .NET runtime. We have kept the framework similar in spirit to the original log4j while taking advantage of new features in the .NET runtime. For more information on log4net see the features document. Free Microsoft Web Platform Installer The Microsoft Web Platform Installer 2.0 (Web PI) is a free tool that makes getting the latest components of the Microsoft Web Platform, including Internet Information Services (IIS), SQL Server Express, .NET Framework and Visual Web Developer easy. Free Mono Development Don't have Visual Studio - no problem! This is an open Source C# and .NET development environment for Linux, Windows, and Mac OS X Free Net Mass Downloader While it’s great that Microsoft has released the .NET Reference Source Code, you can only get it one file at a time while you’re debugging. If you’d like to batch download it for reading or to populate the cache, you’d have to write a program that instantiated and called each method in the Framework Class Library. Fortunately, .NET Mass Downloader comes to the rescue! Free nMap Nmap ("Network Mapper") is a free and open source (license) utility for network exploration or security auditing. Many systems and network administrators also find it useful for tasks such as network inventory, managing service upgrade schedules, and monitoring host or service uptime. Free NoScript (Firefox add-in) The NoScript Firefox extension provides extra protection for Firefox, Flock, Seamonkey and other Mozilla-based browsers: this free, open source add-on allows JavaScript, Java and Flash and other plug-ins to be executed only by trusted web sites of your choice (e.g. your online bank), and provides the most powerful Anti-XSS protection available in a browser. Free NotePad 2 Notepad2, a fast and light-weight Notepad-like text editor with syntax highlighting. This program can be run out of the box without installation, and does not touch your system's registry. Free PageSpy PageSpy is a small add-on for Internet Explorer that allows you to select any element within a webpage, select an option in the context menu, and view detailed information about both the coding behind the page and the element you selected. Free Phrase Express PhraseExpress manages your frequently used text snippets in customizable categories for quick access. Free PowerGui PowerGui is a free community for PowerGUI, a graphical user interface and script editor for Microsoft Windows PowerShell! Free Powershell Comes with Win7, but you can automate tasks by using the .NET Framework. Great for network admins. Free Process Explorer Ever wondered which program has a particular file or directory open? Now you can find out. Process Explorer shows you information about which handles and DLLs processes have opened or loaded. Also, included in the SysInterals Suite. Free Process Monitor Process Monitor is an advanced monitoring tool for Windows that shows real-time file system, Registry and process/thread activity. Free Reflector Explore and analyze compiled .NET assemblies, viewing them in C#, Visual Basic, and IL. This is an Essential for any .NET developer. Free Regular Expression Library Stuck on a Regular Expression but you think someone has already figured it out? Chances are they have. Free Regulator Regulator makes Regular Expressions easy. This is a must have for a .NET Developer. Free RenameMaestro RenameMaestro is probably the easiest batch file renamer you'll find to instantly rename multiple files COST ReSharper The one program that I cannot live without. Supports VS2010 and offers simple refactoring, code analysis/assistance/cleanup/templates. One of the few applications that is worth the $$$. COST/Trial ScrewTurn Wiki ScrewTurn Wiki allows you to create, manage and share wikis. A wiki is a collaboratively-edited, information-centered website: the most famous is Wikipedia. Free SharpDevelop What is #develop? SharpDevelop is a free IDE for C# and VB.NET projects on Microsoft's .NET platform. Free Show Me The Template Show Me The Template is a tool for exploring the templates, be their data, control or items panel, that comes with the controls built into WPF for all 6 themes. Free SnippetCompiler Compiles code snippets without opening Visual Studio. It does not support .NET 4. Free SQL Prompt SQL Prompt is a plug-in that increases how fast you can work with SQL. It provides code-completion for SQL server, reformatting, db schema information and snippets. Awesome! COST/Trial SQLinForm SQLinForm is an automatic SQL code formatter for all major databases including ORACLE, SQL Server, DB2, UDB, Sybase, Informix, PostgreSQL, Teradata, MySQL, MS Access etc. with over 70 formatting options. COST/OnlineFree SSMS Tools SSMS Tools Pack is an add-in for Microsoft SQL Server Management Studio (SSMS) including SSMS Express. Free Storm STORM is a free and open source tool for testing web services. Free Telerik Code Convertor Convert code from VB to C Sharp and Vice Versa. Free TurtoiseSVN TortoiseSVN is a really easy to use Revision control / version control / source control software for Windows.Since it's not an integration for a specific IDE you can use it with whatever development tools you like. Free UltraEdit UltraEdit is the ideal text, HTML and hex editor, and an advanced PHP, Perl, Java and JavaScript editor for programmers. UltraEdit is also an XML editor including a tree-style XML parser. An industry-award winner, UltraEdit supports disk-based 64-bit file handling (standard) on 32-bit Windows platforms (Windows 2000 and later). COST/Trial Virtual Windows XP Comes with some W7 version and allows you to run WinXP along side W7. Free VirtualBox Virtualization by Sun Microsystems. You can virtualize Windows, Linux and more. Free Visual Log Parser SQL queries against a variety of log files and other system data sources. Free WinMerge WinMerge is an Open Source differencing and merging tool for Windows. WinMerge can compare both folders and files, presenting differences in a visual text format that is easy to understand and handle. Free Wireshark Wireshark is one of the best network protocol analyzer's for Unix and windows. This has been used several times to get me out of a bind. Free XML Notepad 07 Old, but still one of my favorite XML viewers. Free Productivity Tools – This is the list of tools that I use to save time or quickly navigate around Windows. Name Description License AutoHotKey Automate almost anything by sending keystrokes and mouse clicks. You can write a mouse or keyboard macro by hand or use the macro recorder. Free CLCL CLCL is clipboard caching utility. Free Ditto Ditto is an extension to the standard windows clipboard. It saves each item placed on the clipboard allowing you access to any of those items at a later time. Ditto allows you to save any type of information that can be put on the clipboard, text, images, html, custom formats, ..... Free Evernote Remember everything from notes to photos. It will synch between computers/devices. Free InfoRapid Inforapid is a search tool that will display all you search results in a html like browser. If you click on a word in that browser, it will start another search to the word you clicked on. Handy if you want to trackback something to it's true origin. The word you looked for will be highlighted in red. Clicking on the red word will open the containing file in a text based viewer. Clicking on any word in the opened document will start another search on that word. Free KatMouse The prime purpose of the KatMouse utility is to enhance the functionality of mice with a scroll wheel, offering 'universal' scrolling: moving the mouse wheel will scroll the window directly beneath the mouse cursor (not the one with the keyboard focus, which is default on Windows OSes). This is a major increase in the usefulness of the mouse wheel. Free ScreenR Instant Screencast with nothing to download. Works with Mac or PC and free. Free Start++ Start++ is an enhancement for the Start Menu in Windows Vista. It also extends the Run box and the command-line with customizable commands. For example, typing "w Windows Vista" will take you to the Windows Vista page on Wikipedia! Free Synergy Synergy lets you easily share a single mouse and keyboard between multiple computers with different operating systems, each with its own display, without special hardware. It's intended for users with multiple computers on their desk since each system uses its own monitor(s). Free Texter Texter lets you define text substitution hot strings that, when triggered, will replace hotstring with a larger piece of text. By entering your most commonly-typed snippets of text into Texter, you can save countless keystrokes in the course of the day. Free Total Commander File handling, FTP, Archive handling and much more. Even works with Win3.11. COST/Trial Available Wizmouse WizMouse is a mouse enhancement utility that makes your mouse wheel work on the window currently under the mouse pointer, instead of the currently focused window. This means you no longer have to click on a window before being able to scroll it with the mouse wheel. This is a far more comfortable and practical way to make use of the mouse wheel. Free Xmarks Bookmark sync and search between computers. Free General Utilities – This is a list for power user users or anyone that wants more out of Windows. I usually install a majority of these whenever I get a new system. Name Description License µTorrent µTorrent is a lightweight and efficient BitTorrent client for Windows or Mac with many features. I use this for downloading LEGAL media. Free Audacity Audacity® is free, open source software for recording and editing sounds. It is available for Mac OS X, Microsoft Windows, GNU/Linux, and other operating systems. Learn more about Audacity... Also check our Wiki and Forum for more information. Free AVast Free FREE Antivirus. Free CD Burner XP Pro CDBurnerXP is a free application to burn CDs and DVDs, including Blu-Ray and HD-DVDs. It also includes the feature to burn and create ISOs, as well as a multilanguage interface. Free CDEX You can extract digital audio CDs into mp3/wav. Free Combofix Combofix is a freeware (a legitimate spyware remover created by sUBs), Combofix was designed to scan a computer for known malware, spyware (SurfSideKick, QooLogic, and Look2Me as well as any other combination of the mentioned spyware applications) and remove them. Free Cpu-Z Provides information about some of the main devices of your system. Free Cropper Cropper is a screen capture utility written in C#. It makes it fast and easy to grab parts of your screen. Use it to easily crop out sections of vector graphic files such as Fireworks without having to flatten the files or open in a new editor. Use it to easily capture parts of a web site, including text and images. It's also great for writing documentation that needs images of your application or web site. Free DropBox Drag and Drop files to sync between computers. Free DVD-Fab Converts/Copies DVDs/Blu-Ray to different formats. (like mp4, mkv, avi) COST/Trial Available FastStone Capture FastStone Capture is a powerful, lightweight, yet full-featured screen capture tool that allows you to easily capture and annotate anything on the screen including windows, objects, menus, full screen, rectangular/freehand regions and even scrolling windows/web pages. Free ffdshow FFDShow is a DirectShow decoding filter for decompressing DivX, XviD, H.264, FLV1, WMV, MPEG-1 and MPEG-2, MPEG-4 movies. Free Filezilla FileZilla Client is a fast and reliable cross-platform FTP, FTPS and SFTP client with lots of useful features and an intuitive graphical user interface. You can also download a server version. Free FireFox Web Browser, do you really need an explanation? Free FireGestures A customizable mouse gestures extension which enables you to execute various commands and user scripts with five types of gestures. Free FoxIt Reader Light weight PDF viewer. You should install this with the advanced setting or it will install a toolbar and setup some shortcuts. Free gSynchIt Synch Gmail and Outlook. Even supports Outlook 2010 32/64 bit COST/Trial Available Hulu Desktop At home or in a hotel, this has replaced my cable/satellite subscription. Free ImgBurn ImgBurn is a lightweight CD / DVD / HD DVD / Blu-ray burning application that everyone should have in their toolkit! Free Infrarecorder InfraRecorder is a free CD/DVD burning solution for Microsoft Windows. It offers a wide range of powerful features; all through an easy to use application interface and Windows Explorer integration. Free KeePass KeePass is a free open source password manager, which helps you to manage your passwords in a secure way. Free LastPass Another password management, synchronize between browsers, automatic form filling and more. Free Live Essentials One download and lots of programs including Mail, Live Writer, Movie Maker and more! Free Monitores MonitorES is a small windows utility that helps you to turnoff monitor display when you lock down your machine.Also when you lock your machine, it will pause all your running media programs & set your IM status message to "Away" / Custom message(via options) and restore it back to normal when you back. Free mRemote mRemote is a full-featured, multi-tab remote connections manager. Free Open Office OpenOffice.org 3 is the leading open-source office software suite for word processing, spreadsheets, presentations, graphics, databases and more. It is available in many languages and works on all common computers. It stores all your data in an international open standard format and can also read and write files from other common office software packages. It can be downloaded and used completely free of charge for any purpose. Free Paint.NET Simple, intuitive, and innovative user interface for editing photos. Free Picasa Picasa is free photo editing software from Google that makes your pictures look great. Free Pidgin Pidgin is an easy to use and free chat client used by millions. Connect to AIM, MSN, Yahoo, and more chat networks all at once. Free PING PING is a live Linux ISO, based on the excellent Linux From Scratch (LFS) documentation. It can be burnt on a CD and booted, or integrated into a PXE / RIS environment. Free Putty PuTTY is an SSH and telnet client, developed originally by Simon Tatham for the Windows platform. Free Revo Uninstaller Revo Uninstaller Pro helps you to uninstall software and remove unwanted programs installed on your computer easily! Even if you have problems uninstalling and cannot uninstall them from "Windows Add or Remove Programs" control panel applet.Revo Uninstaller is a much faster and more powerful alternative to "Windows Add or Remove Programs" applet! It has very powerful features to uninstall and remove programs. Free Security Essentials Microsoft Security Essentials is a new, free consumer anti-malware solution for your computer. Free SetupVirtualCloneDrive Virtual CloneDrive works and behaves just like a physical CD/DVD drive, however it exists only virtually. Point to the .ISO file and it appears in Windows Explorer as a Drive. Free Shark 007 Codec Pack Play just about any file format with this download. Also includes my W7 Media Playlist Generator. Free Snagit 9 Screen Capture on steroids. Add arrows, captions, etc to any screenshot. COST/Trial Available SysinternalsSuite Go ahead and download the entire sys internals suite. I have mentioned multiple programs in this suite already. Free TeraCopy TeraCopy is a compact program designed to copy and move files at the maximum possible speed, providing the user with a lot of features. Free for Home TrueCrypt Free open-source disk encryption software for Windows 7/Vista/XP, Mac OS X, and Linux Free TweetDeck Fully featured Twitter client. Free UltraVNC UltraVNC is a powerful, easy to use and free software that can display the screen of another computer (via internet or network) on your own screen. The program allows you to use your mouse and keyboard to control the other PC remotely. It means that you can work on a remote computer, as if you were sitting in front of it, right from your current location. Free Unlocker Unlocks locked files. Pretty simple right? Free VLC Media Player VLC media player is a highly portable multimedia player and multimedia framework capable of reading most audio and video formats Free Windows 7 Media Playlist This program is special to my heart because I wrote it. It has been mentioned on podcast and various websites. It allows you to quickly create wvx video playlist for Windows Media Center. Free WinRAR WinRAR is a powerful archive manager. It can backup your data and reduce the size of email attachments, decompress RAR, ZIP and other files downloaded from Internet and create new archives in RAR and ZIP file format. COST/Trial Available Blogging – I use the following for my blog. Name Description License Insert Code for Windows Live Writer Insert Code for Windows Live Writer will format a snippet of text in a number of programming languages such as C#, HTML, MSH, JavaScript, Visual Basic and TSQL. Free LiveWriter Included in Live Essentials, but the ultimate in Windows Blogging Free PasteAsVSCode Plug-in for Windows Live Writer that pastes clipboard content as Visual Studio code. Preserves syntax highlighting, indentation and background color. Converts RTF, outputted by Visual Studio, into HTML. Free Desktop Management – The list below represent the best in Windows Desktop Management. Name Description License 7 Stacks Allows users to have "stacks" of icons in their taskbar. Free Executor Executor is a multi purpose launcher and a more advanced and customizable version of windows run. Free Fences Fences is a program that helps you organize your desktop and can hide your icons when they are not in use. Free RocketDock Rocket Dock is a smoothly animated, alpha blended application launcher. It provides a nice clean interface to drop shortcuts on for easy access and organization. With each item completely customizable there is no end to what you can add and launch from the dock. Free WindowsTab Tabbing is an essential feature of modern web browsers. Window Tabs brings the productivity of tabbed window management to all of your desktop applications. Free

Read the article

Quick guide to Oracle IRM 11g: Server configuration

- by Simon Thorpe

Quick guide to Oracle IRM 11g index Welcome to the second article in this quick quide to Oracle IRM 11g. Hopefully you've just finished the first article which takes you through deploying the software onto a Linux server. This article walks you through the configuration of this new service and contains a subset of information from the official documentation and is focused on installing the server on Oracle Enterprise Linux. If you are planning to deploy on a non-Linux platform, you will need to reference the documentation for platform specific information. Contents Introduction Create IRM WebLogic Domain Starting the Admin Server and initial configuration Introduction In the previous article the database was prepared, the WebLogic Application Server installed and the files required for an IRM server installed. But we don't actually have a configured system yet. We need to now create a WebLogic Domain in which the IRM server will run, then configure some of the settings and crypography so that we can create a context and be ready to seal some content and test it all works. This article doesn't cover the configuration of SSL communication from client to server. This is quite a big topic and a separate article has been dedicated for this area. In these articles I also use the hostname, irm.company.internal to reference the IRM server and later on use the hostname irm.company.com in reference to the public facing service. Create IRM WebLogic Domain First step is creating the WebLogic domain, in a console switch to the newly created IRM installation folder as shown below and we will run the domain configuration wizard. [oracle@irm /]$ cd /oracle/middleware/Oracle_IRM/common/bin [oracle@irm bin]$ ./config.sh First thing the wizard will ask is if you wish to create a new or extend an existing domain. This guide is creating a standalone system so you should select to create a new domain. Next step is to choose what technologies from the Oracle ECM Suite you wish this domain to host. You are only interested in selecting the option "Oracle Information Rights Management". When you select this check box you will notice that it also selects "Oracle Enterprise Manager" and "Oracle JRF" as these are dependencies of the IRM server. You then need to specify where you wish to place the domain files. I usually just change the domain name from base_domain or irm_domain and leave the others with their defaults. Now the domain will have a single user initially and by default this user is called "weblogic". I usually change this account name to "sysadmin" or "administrator", but in this guide lets just accept the default. With respects to the next dialog, again for eval or dev reasons, leave the server startup mode as development. The JDK should also be automatically detected. We now need to provide details of the database. This guide is using the Oracle 11gR2 database and the settings I used can be seen in the image to the right. There is a lot of configuration that can now be done for the admin server, any managed servers and where the deployments reside. In this guide I am leaving all of these to their defaults so do not check any of the boxes. However I will on this blog be detailing later how you can go back and setup things such as automated startup of an IRM server which require changes to these default settings. But for now, lets leave it all alone and just click next. Now we are ready to install. Note that from this dialog you can scroll the left window and see there are going to be two servers created from the defaults. The AdminServer which is where you modify settings for the WebLogic Server and also hosts the Oracle Enterprise Manager for IRM which allows to monitor the IRM service performance and also make service related settings (which we shortly do below) and the IRM_server1 which hosts the actual IRM services themselves. So go right ahead and hit create, the process is pretty quick and usually under 10 minutes. When the domain creation ends, it will give you the URL to the admin server. It's worth noting this down and the URL is usually; http://irm.company.internal:7001 Starting the Admin Server and initial configuration First thing to do is to start the WebLogic Admin server and review the initial IRM server settings. In this guide we are going to run the Admin server and IRM server in console windows, in another article I will discuss running these as background services. So for now, start a console and run the Admin server by doing the following. cd /oracle/middleware/user_projects/domains/irm_domain/ ./startWebLogic.sh Wait for the server to start, you are looking for the following line to be reported in the console window. <BEA-00360><Server started in RUNNING mode> First step is configuring the IRM service via Enterprise Manager. Now that the Admin server is running you can point a browser at http://irm.company.internal:7001/em. Login with the username and password you supplied when you created the domain. In Enterprise Manager the IRM service administrator is able to make server wide configuration. However finding where to access the pages with these settings can be a bit of a challenge. After logging in on the left you'll see a tree containing elements of the Enterprise Manager farm Farm_irm_domain. Open up Content Management, then Information Rights Management and finally select the IRM node. On the right then select the IRM menu item, navigate to the Administration section and now we have four options, for now, we are just going to look at General Settings. The image on the right proves that a picture is worth a thousand words (or 113 in this case). The General Settings page allows you to set the cryptographic algorithms used for protecting sealed content. Unless you have a burning need to increase the key lengths or you need to comply to a regulation or government mandate, AES192 is a good start. You can change this later on without worry. The most important setting here we need to make is the Server URL. In this blog article I go over why this URL is so important, basically every single piece of content you protect with Oracle IRM is going to have this URL embedded in it, so if it's wrong or unresolvable, then nobody can open the secured documents. Note that in our environment we have yet to do any SSL configuration of the service. If you intend to build a server without SSL, then use http as the protocol instead of https. But I would recommend using SSL and setting this up is described in the next article. I would also probably up the device count from 1 to 3. This means that any user can retrieve rights to access content onto 3 computers at any one time. The default of 1 doesn't really make sense in development, evaluation nor even production environments and my experience is that 3 is a better number. Next step is to create the keystore for the IRM server. When a classification (called a context) is created, Oracle IRM generates a unique set of symmetric keys which are used to secure the content itself. These keys are then encrypted with a set of "wrapper" asymmetric cryptography keys which are stored externally to the server either in a Java Key Store or a HSM. These keys need to be generated and the following shows my commands and the resulting output. I have greyed out the responses from the commands so you can see the input a little easier. [oracle@irmsrv ~]$ cd /oracle/middleware/wlserver_10.3/server/bin/ [oracle@irmsrv bin]$ ./setWLSEnv.sh CLASSPATH=/oracle/middleware/patch_wls1033/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/oracle/middleware/patch_ocp353/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/usr/java/jdk1.6.0_18/lib/tools.jar:/oracle/middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/oracle/middleware/wlserver_10.3/server/lib/weblogic.jar:/oracle/middleware/modules/features/weblogic.server.modules_10.3.3.0.jar:/oracle/middleware/wlserver_10.3/server/lib/webservices.jar:/oracle/middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/oracle/middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar: PATH=/oracle/middleware/wlserver_10.3/server/bin:/oracle/middleware/modules/org.apache.ant_1.7.1/bin:/usr/java/jdk1.6.0_18/jre/bin:/usr/java/jdk1.6.0_18/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/home/oracle/bin Your environment has been set. [oracle@irmsrv bin]$ cd /oracle/middleware/user_projects/domains/irm_domain/config/fmwconfig/ [oracle@irmsrv fmwconfig]$ keytool -genkeypair -alias oracle.irm.wrap -keyalg RSA -keysize 2048 -keystore irm.jks Enter keystore password: Re-enter new password: What is your first and last name? [Unknown]: Simon Thorpe What is the name of your organizational unit? [Unknown]: Oracle What is the name of your organization? [Unknown]: Oracle What is the name of your City or Locality? [Unknown]: San Francisco What is the name of your State or Province? [Unknown]: CA What is the two-letter country code for this unit? [Unknown]: US Is CN=Simon Thorpe, OU=Oracle, O=Oracle, L=San Francisco, ST=CA, C=US correct? [no]: yes Enter key password for (RETURN if same as keystore password): At this point we now have an irm.jks in the directory /oracle/middleware/user_projects/domains/irm_domain/config/fmwconfig. The reason we store it here is this folder would be backed up as part of a domain backup. As with any cryptographic technology, DO NOT LOSE THESE KEYS OR THIS KEY STORE. Once you've sealed content against a context, the keys will be wrapped with these keys, lose these keys, and you can't get access to any secured content, pretty important. Now we've got the keys created, we need to go back to the IRM Enterprise Manager and set the location of the key store. Going back to the General Settings page in Enterprise Manager scroll down to Keystore Settings. Leave the type as JKS but change the location to; /oracle/Middleware/user_projects/domains/irm_domain/config/fmwconfig/irm.jks and hit Apply. The final step with regards to the key store is we need to tell the server what the password is for the Java Key Store so that it can be opened and the keys accessed. Once more fire up a console window and run these commands (again i've greyed out the clutter to see the commands easier). You will see dummy passed into the commands, this is because the command asks for a username, but in this instance we don't use one, hence the value dummy is passed and it isn't used. [oracle@irmsrv fmwconfig]$ cd /oracle/middleware/Oracle_IRM/common/bin/ [oracle@irmsrv bin]$ ./wlst.sh ... lots of settings fly by... Welcome to WebLogic Server Administration Scripting Shell Type help() for help on available commands wls:/offline>connect('weblogic','password','t3://irmsrv.us.oracle.com:7001') Connecting to t3://irmsrv.us.oracle.com:7001 with userid weblogic ... Successfully connected to Admin Server 'AdminServer' that belongs to domain 'irm_domain'. Warning: An insecure protocol was used to connect to the server. To ensure on-the-wire security, the SSL port or Admin port should be used instead. wls:/irm_domain/serverConfig>createCred("IRM","keystore:irm.jks","dummy","password") Location changed to domainRuntime tree. This is a read-only tree with DomainMBean as the root. For more help, use help(domainRuntime)wls:/irm_domain/serverConfig>createCred("IRM","key:irm.jks:oracle.irm.wrap","dummy","password") Already in Domain Runtime Tree wls:/irm_domain/serverConfig> At last we are now ready to fire up the IRM server itself. The domain creation created a managed server called IRM_server1 and we need to start this, use the following commands in a new console window. cd /oracle/middleware/user_projects/domains/irm_domain/bin/ ./startManagedWebLogic.sh IRM_server1 This will start up the server in the console, unlike the Admin server, you need to provide the username and password for the service to start. Enter in your weblogic username and password when prompted. You can change this behavior by putting the password into a boot.properties file, read more about this in the WebLogic Server documentation. Once running, wait until you see the line; <Notice><WebLogicServer><BEA-000360><Server started in RUNNING mode> At this point we can now login to the Oracle IRM Management Website at the URL. http://irm.company.internal:1600/irm_rights/ The server is just configured for HTTP at the moment, no SSL involved. Just want to ensure we can get a working system up and running. You should now see a login like the image on the right and you can now login using your weblogic username and password. The next article in this guide goes over adding SSL and now testing your server by actually adding a few users, sealing some content and opening this content as a user.

Read the article

Developing web apps using ASP.NET MVC 3, Razor and EF Code First - Part 2

- by shiju

In my previous post Developing web apps using ASP.NET MVC 3, Razor and EF Code First - Part 1, we have discussed on how to work with ASP.NET MVC 3 and EF Code First for developing web apps. We have created generic repository and unit of work with EF Code First for our ASP.NET MVC 3 application and did basic CRUD operations against a simple domain entity. In this post, I will demonstrate on working with domain entity with deep object graph, Service Layer and View Models and will also complete the rest of the demo application. In the previous post, we have done CRUD operations against Category entity and this post will be focus on Expense entity those have an association with Category entity. You can download the source code from http://efmvc.codeplex.com . The following frameworks will be used for this step by step tutorial. 1. ASP.NET MVC 3 RTM 2. EF Code First CTP 5 3. Unity 2.0 Domain Model Category Entity public class Category { public int CategoryId { get; set; } [Required(ErrorMessage = "Name Required")] [StringLength(25, ErrorMessage = "Must be less than 25 characters")] public string Name { get; set;} public string Description { get; set; } public virtual ICollection<Expense> Expenses { get; set; } } Expense Entity public class Expense { public int ExpenseId { get; set; } public string Transaction { get; set; } public DateTime Date { get; set; } public double Amount { get; set; } public int CategoryId { get; set; } public virtual Category Category { get; set; } } We have two domain entities - Category and Expense. A single category contains a list of expense transactions and every expense transaction should have a Category. Repository class for Expense Transaction Let’s create repository class for handling CRUD operations for Expense entity public class ExpenseRepository : RepositoryBase<Expense>, IExpenseRepository { public ExpenseRepository(IDatabaseFactory databaseFactory) : base(databaseFactory) { } } public interface IExpenseRepository : IRepository<Expense> { } Service Layer If you are new to Service Layer, checkout Martin Fowler's article Service Layer . According to Martin Fowler, Service Layer defines an application's boundary and its set of available operations from the perspective of interfacing client layers. It encapsulates the application's business logic, controlling transactions and coordinating responses in the implementation of its operations. Controller classes should be lightweight and do not put much of business logic onto it. We can use the service layer as the business logic layer and can encapsulate the rules of the application. Let’s create a Service class for coordinates the transaction for Expense public interface IExpenseService { IEnumerable<Expense> GetExpenses(DateTime startDate, DateTime ednDate); Expense GetExpense(int id); void CreateExpense(Expense expense); void DeleteExpense(int id); void SaveExpense(); } public class ExpenseService : IExpenseService { private readonly IExpenseRepository expenseRepository; private readonly IUnitOfWork unitOfWork; public ExpenseService(IExpenseRepository expenseRepository, IUnitOfWork unitOfWork) { this.expenseRepository = expenseRepository; this.unitOfWork = unitOfWork; } public IEnumerable<Expense> GetExpenses(DateTime startDate, DateTime endDate) { var expenses = expenseRepository.GetMany(exp => exp.Date >= startDate && exp.Date <= endDate); return expenses; } public void CreateExpense(Expense expense) { expenseRepository.Add(expense); unitOfWork.Commit(); } public Expense GetExpense(int id) { var expense = expenseRepository.GetById(id); return expense; } public void DeleteExpense(int id) { var expense = expenseRepository.GetById(id); expenseRepository.Delete(expense); unitOfWork.Commit(); } public void SaveExpense() { unitOfWork.Commit(); } } View Model for Expense Transactions In real world ASP.NET MVC applications, we need to design model objects especially for our views. Our domain objects are mainly designed for the needs for domain model and it is representing the domain of our applications. On the other hand, View Model objects are designed for our needs for views. We have an Expense domain entity that has an association with Category. While we are creating a new Expense, we have to specify that in which Category belongs with the new Expense transaction. The user interface for Expense transaction will have form fields for representing the Expense entity and a CategoryId for representing the Category. So let's create view model for representing the need for Expense transactions. public class ExpenseViewModel { public int ExpenseId { get; set; } [Required(ErrorMessage = "Category Required")] public int CategoryId { get; set; } [Required(ErrorMessage = "Transaction Required")] public string Transaction { get; set; } [Required(ErrorMessage = "Date Required")] public DateTime Date { get; set; } [Required(ErrorMessage = "Amount Required")] public double Amount { get; set; } public IEnumerable<SelectListItem> Category { get; set; } } The ExpenseViewModel is designed for the purpose of View template and contains the all validation rules. It has properties for mapping values to Expense entity and a property Category for binding values to a drop-down for list values of Category. Create Expense transaction Let’s create action methods in the ExpenseController for creating expense transactions public ActionResult Create() { var expenseModel = new ExpenseViewModel(); var categories = categoryService.GetCategories(); expenseModel.Category = categories.ToSelectListItems(-1); expenseModel.Date = DateTime.Today; return View(expenseModel); } [HttpPost] public ActionResult Create(ExpenseViewModel expenseViewModel) { if (!ModelState.IsValid) { var categories = categoryService.GetCategories(); expenseViewModel.Category = categories.ToSelectListItems(expenseViewModel.CategoryId); return View("Save", expenseViewModel); } Expense expense=new Expense(); ModelCopier.CopyModel(expenseViewModel,expense); expenseService.CreateExpense(expense); return RedirectToAction("Index"); } In the Create action method for HttpGet request, we have created an instance of our View Model ExpenseViewModel with Category information for the drop-down list and passing the Model object to View template. The extension method ToSelectListItems is shown below public static IEnumerable<SelectListItem> ToSelectListItems( this IEnumerable<Category> categories, int selectedId) { return categories.OrderBy(category => category.Name) .Select(category => new SelectListItem { Selected = (category.CategoryId == selectedId), Text = category.Name, Value = category.CategoryId.ToString() }); } In the Create action method for HttpPost, our view model object ExpenseViewModel will map with posted form input values. We need to create an instance of Expense for the persistence purpose. So we need to copy values from ExpenseViewModel object to Expense object. ASP.NET MVC futures assembly provides a static class ModelCopier that can use for copying values between Model objects. ModelCopier class has two static methods - CopyCollection and CopyModel.CopyCollection method will copy values between two collection objects and CopyModel will copy values between two model objects. We have used CopyModel method of ModelCopier class for copying values from expenseViewModel object to expense object. Finally we did a call to CreateExpense method of ExpenseService class for persisting new expense transaction. List Expense Transactions We want to list expense transactions based on a date range. So let’s create action method for filtering expense transactions with a specified date range. public ActionResult Index(DateTime? startDate, DateTime? endDate) { //If date is not passed, take current month's first and last dte DateTime dtNow; dtNow = DateTime.Today; if (!startDate.HasValue) { startDate = new DateTime(dtNow.Year, dtNow.Month, 1); endDate = startDate.Value.AddMonths(1).AddDays(-1); } //take last date of start date's month, if end date is not passed if (startDate.HasValue && !endDate.HasValue) { endDate = (new DateTime(startDate.Value.Year, startDate.Value.Month, 1)).AddMonths(1).AddDays(-1); } var expenses = expenseService.GetExpenses(startDate.Value ,endDate.Value); //if request is Ajax will return partial view if (Request.IsAjaxRequest()) { return PartialView("ExpenseList", expenses); } //set start date and end date to ViewBag dictionary ViewBag.StartDate = startDate.Value.ToShortDateString(); ViewBag.EndDate = endDate.Value.ToShortDateString(); //if request is not ajax return View(expenses); } We are using the above Index Action method for both Ajax requests and normal requests. If there is a request for Ajax, we will call the PartialView ExpenseList. Razor Views for listing Expense information Let’s create view templates in Razor for showing list of Expense information ExpenseList.cshtml @model IEnumerable<MyFinance.Domain.Expense> <table> <tr> <th>Actions</th> <th>Category</th> <th> Transaction </th> <th> Date </th> <th> Amount </th> </tr> @foreach (var item in Model) { <tr> <td> @Html.ActionLink("Edit", "Edit",new { id = item.ExpenseId }) @Ajax.ActionLink("Delete", "Delete", new { id = item.ExpenseId }, new AjaxOptions { Confirm = "Delete Expense?", HttpMethod = "Post", UpdateTargetId = "divExpenseList" }) </td> <td> @item.Category.Name </td> <td> @item.Transaction </td> <td> @String.Format("{0:d}", item.Date) </td> <td> @String.Format("{0:F}", item.Amount) </td> </tr> } </table> <p> @Html.ActionLink("Create New Expense", "Create") | @Html.ActionLink("Create New Category", "Create","Category") </p> Index.cshtml @using MyFinance.Helpers; @model IEnumerable<MyFinance.Domain.Expense> @{ ViewBag.Title = "Index"; } <h2>Expense List</h2> <script src="@Url.Content("~/Scripts/jquery.unobtrusive-ajax.min.js")" type="text/javascript"></script> <script src="@Url.Content("~/Scripts/jquery-ui.js")" type="text/javascript"></script> <script src="@Url.Content("~/Scripts/jquery.ui.datepicker.js")" type="text/javascript"></script> <link href="@Url.Content("~/Content/jquery-ui-1.8.6.custom.css")" rel="stylesheet" type="text/css" /> @using (Ajax.BeginForm(new AjaxOptions{ UpdateTargetId="divExpenseList", HttpMethod="Get"})) { <table> <tr> <td> <div> Start Date: @Html.TextBox("StartDate", Html.Encode(String.Format("{0:mm/dd/yyyy}", ViewData["StartDate"].ToString())), new { @class = "ui-datepicker" }) </div> </td> <td><div> End Date: @Html.TextBox("EndDate", Html.Encode(String.Format("{0:mm/dd/yyyy}", ViewData["EndDate"].ToString())), new { @class = "ui-datepicker" }) </div></td> <td> <input type="submit" value="Search By TransactionDate" /></td> </tr> </table> } <div id="divExpenseList"> @Html.Partial("ExpenseList", Model) </div> <script type="text/javascript"> $().ready(function () { $('.ui-datepicker').datepicker({ dateFormat: 'mm/dd/yy', buttonImage: '@Url.Content("~/Content/calendar.gif")', buttonImageOnly: true, showOn: "button" }); }); </script> Ajax search functionality using Ajax.BeginForm The search functionality of Index view is providing Ajax functionality using Ajax.BeginForm. The Ajax.BeginForm() method writes an opening <form> tag to the response. You can use this method in a using block. In that case, the method renders the closing </form> tag at the end of the using block and the form is submitted asynchronously by using JavaScript. The search functionality will call the Index Action method and this will return partial view ExpenseList for updating the search result. We want to update the response UI for the Ajax request onto divExpenseList element. So we have specified the UpdateTargetId as "divExpenseList" in the Ajax.BeginForm method. Add jQuery DatePicker Our search functionality is using a date range so we are providing two date pickers using jQuery datepicker. You need to add reference to the following JavaScript files to working with jQuery datepicker. jquery-ui.js jquery.ui.datepicker.js For theme support for datepicker, we can use a customized CSS class. In our example we have used a CSS file “jquery-ui-1.8.6.custom.css”. For more details about the datepicker component, visit jquery UI website at http://jqueryui.com/demos/datepicker . In the jQuery ready event, we have used following JavaScript function to initialize the UI element to show date picker. <script type="text/javascript"> $().ready(function () { $('.ui-datepicker').datepicker({ dateFormat: 'mm/dd/yy', buttonImage: '@Url.Content("~/Content/calendar.gif")', buttonImageOnly: true, showOn: "button" }); }); </script> Source Code You can download the source code from http://efmvc.codeplex.com/ . Summary In this two-part series, we have created a simple web application using ASP.NET MVC 3 RTM, Razor and EF Code First CTP 5. I have demonstrated patterns and practices such as Dependency Injection, Repository pattern, Unit of Work, ViewModel and Service Layer. My primary objective was to demonstrate different practices and options for developing web apps using ASP.NET MVC 3 and EF Code First. You can implement these approaches in your own way for building web apps using ASP.NET MVC 3. I will refactor this demo app on later time.

Read the article

How to create a new WCF/MVC/jQuery application from scratch

- by pjohnson

As a corporate developer by trade, I don't get much opportunity to create from-the-ground-up web sites; usually it's tweaks, fixes, and new functionality to existing sites. And with hobby sites, I often don't find the challenges I run into with enterprise systems; usually it's starting from Visual Studio's boilerplate project and adding whatever functionality I want to play around with, rarely deploying outside my own machine. So my experience creating a new enterprise-level site was a bit dated, and the technologies to do so have come a long way, and are much more ready to go out of the box. My intention with this post isn't so much to provide any groundbreaking insights, but to just tie together a lot of information in one place to make it easy to create a new site from scratch. Architecture One site I created earlier this year had an MVC 3 front end and a WCF 4-driven service layer. Using Visual Studio 2010, these project types are easy enough to add to a new solution. I created a third Class Library project to store common functionality the front end and services layers both needed to access, for example, the DataContract classes that the front end uses to call services in the service layer. By keeping DataContract classes in a separate project, I avoided the need for the front end to have an assembly/project reference directly to the services code, a bit cleaner and more flexible of an SOA implementation. Consuming the service Even by this point, VS has given you a lot. You have a working web site and a working service, neither of which do much but are great starting points. To wire up the front end and the services, I needed to create proxy classes and WCF client configuration information. I decided to use the SvcUtil.exe utility provided as part of the Windows SDK, which you should have installed if you installed VS. VS also provides an Add Service Reference command since the .NET 1.x ASMX days, which I've never really liked; it creates several .cs/.disco/etc. files, some of which contained hardcoded URL's, adding duplicate files (*1.cs, *2.cs, etc.) without doing a good job of cleaning up after itself. I've found SvcUtil much cleaner, as it outputs one C# file (containing several proxy classes) and a config file with settings, and it's easier to use to regenerate the proxy classes when the service changes, and to then maintain all your configuration in one place (your Web.config, instead of the Service Reference files). I provided it a reference to a copy of my common assembly so it doesn't try to recreate the data contract classes, had it use the type List<T> for collections, and modified the output files' names and .NET namespace, ending up with a command like: svcutil.exe /l:cs /o:MyService.cs /config:MyService.config /r:MySite.Common.dll /ct:System.Collections.Generic.List`1 /n:*,MySite.Web.ServiceProxies http://localhost:59999/MyService.svc I took the generated MyService.cs file and drop it in the web project, under a ServiceProxies folder, matching the namespace and keeping it separate from classes I coded manually. Integrating the config file took a little more work, but only needed to be done once as these settings didn't often change. A great thing Microsoft improved with WCF 4 is configuration; namely, you can use all the default settings and not have to specify them explicitly in your config file. Unfortunately, SvcUtil doesn't generate its config file this way. If you just copy & paste MyService.config's contents into your front end's Web.config, you'll copy a lot of settings you don't need, plus this will get unwieldy if you add more services in the future, each with its own custom binding. Really, as the only mandatory settings are the endpoint's ABC's (address, binding, and contract) you can get away with just this: <system.serviceModel> <client> <endpoint address="http://localhost:59999/MyService.svc" binding="wsHttpBinding" contract="MySite.Web.ServiceProxies.IMyService" /> </client></system.serviceModel> By default, the services project uses basicHttpBinding. As you can see, I switched it to wsHttpBinding, a more modern standard. Using something like netTcpBinding would probably be faster and more efficient since the client & service are both written in .NET, but it requires additional server setup and open ports, whereas switching to wsHttpBinding is much simpler. From an MVC controller action method, I instantiated the client, and invoked the method for my operation. As with any object that implements IDisposable, I wrapped it in C#'s using() statement, a tidy construct that ensures Dispose gets called no matter what, even if an exception occurs. Unfortunately there are problems with that, as WCF's ClientBase<TChannel> class doesn't implement Dispose according to Microsoft's own usage guidelines. I took an approach similar to Technology Toolbox's fix, except using partial classes instead of a wrapper class to extend the SvcUtil-generated proxy, making the fix more seamless from the controller's perspective, and theoretically, less code I have to change if and when Microsoft fixes this behavior. User interface The MVC 3 project template includes jQuery and some other common JavaScript libraries by default. I updated the ones I used to the latest versions using NuGet, available in VS via the Tools > Library Package Manager > Manage NuGet Packages for Solution... > Updates. I also used this dialog to remove packages I wasn't using. Given that it's smart enough to know the difference between the .js and .min.js files, I was hoping it would be smart enough to know which to include during build and publish operations, but this doesn't seem to be the case. I ended up using Cassette to perform the minification and bundling of my JavaScript and CSS files; ASP.NET 4.5 includes this functionality out of the box. The web client to web server link via jQuery was easy enough. In my JavaScript function, unobtrusively wired up to a button's click event, I called $.ajax, corresponding to an action method that returns a JsonResult, accomplished by passing my model class to the Controller.Json() method, which jQuery helpfully translates from JSON to a JavaScript object.$.ajax calls weren't perfectly straightforward. I tried using the simpler $.post method instead, but ran into trouble without specifying the contentType parameter, which $.post doesn't have. The url parameter is simple enough, though for flexibility in how the site is deployed, I used MVC's Url.Action method to get the URL, then sent this to JavaScript in a JavaScript string variable. If the request needed input data, I used the JSON.stringify function to convert a JavaScript object with the parameters into a JSON string, which MVC then parses into strongly-typed C# parameters. I also specified "json" for dataType, and "application/json; charset=utf-8" for contentType. For success and error, I provided my success and error handling functions, though success is a bit hairier. "Success" in this context indicates whether the HTTP request succeeds, not whether what you wanted the AJAX call to do on the web server was successful. For example, if you make an AJAX call to retrieve a piece of data, the success handler will be invoked for any 200 OK response, and the error handler will be invoked for failed requests, e.g. a 404 Not Found (if the server rejected the URL you provided in the url parameter) or 500 Internal Server Error (e.g. if your C# code threw an exception that wasn't caught). If an exception was caught and handled, or if the data requested wasn't found, this would likely go through the success handler, which would need to do further examination to verify it did in fact get back the data for which it asked. I discuss this more in the next section. Logging and exception handling At this point, I had a working application. If I ran into any errors or unexpected behavior, debugging was easy enough, but of course that's not an option on public web servers. Microsoft Enterprise Library 5.0 filled this gap nicely, with its Logging and Exception Handling functionality. First I installed Enterprise Library; NuGet as outlined above is probably the best way to do so. I needed a total of three assembly references--Microsoft.Practices.EnterpriseLibrary.ExceptionHandling, Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.Logging, and Microsoft.Practices.EnterpriseLibrary.Logging. VS links with the handy Enterprise Library 5.0 Configuration Console, accessible by right-clicking your Web.config and choosing Edit Enterprise Library V5 Configuration. In this console, under Logging Settings, I set up a Rolling Flat File Trace Listener to write to log files but not let them get too large, using a Text Formatter with a simpler template than that provided by default. Logging to a different (or additional) destination is easy enough, but a flat file suited my needs. At this point, I verified it wrote as expected by calling the Microsoft.Practices.EnterpriseLibrary.Logging.Logger.Write method from my C# code. With those settings verified, I went on to wire up Exception Handling with Logging. Back in the EntLib Configuration Console, under Exception Handling, I used a LoggingExceptionHandler, setting its Logging Category to the category I already had configured in the Logging Settings. Then, from code (e.g. a controller's OnException method, or any action method's catch block), I called the Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.ExceptionPolicy.HandleException method, providing the exception and the exception policy name I had configured in the Exception Handling Settings. Before I got this configured correctly, when I tried it out, nothing was logged. In working with .NET, I'm used to seeing an exception if something doesn't work or isn't set up correctly, but instead working with these EntLib modules reminds me more of JavaScript (before the "use strict" v5 days)--it just does nothing and leaves you to figure out why, I presume due in part to the listener pattern Microsoft followed with the Enterprise Library. First, I verified logging worked on its own. Then, verifying/correcting where each piece wires up to the next resolved my problem. Your C# code calls into the Exception Handling module, referencing the policy you pass the HandleException method; that policy's configuration contains a LoggingExceptionHandler that references a logCategory; that logCategory should be added in the loggingConfiguration's categorySources section; that category references a listener; that listener should be added in the loggingConfiguration's listeners section, which specifies the name of the log file. One final note on error handling, as the proper way to handle WCF and MVC errors is a whole other very lengthy discussion. For AJAX calls to MVC action methods, depending on your configuration, an exception thrown here will result in ASP.NET'S Yellow Screen Of Death being sent back as a response, which is at best unnecessarily and uselessly verbose, and at worst a security risk as the internals of your application are exposed to potential hackers. I mitigated this by overriding my controller's OnException method, passing the exception off to the Exception Handling module as above. I created an ErrorModel class with as few properties as possible (e.g. an Error string), sending as little information to the client as possible, to both maximize bandwidth and mitigate risk. I then return an ErrorModel in JSON format for AJAX requests: if (filterContext.HttpContext.Request.IsAjaxRequest()){ filterContext.Result = Json(new ErrorModel(...)); filterContext.ExceptionHandled = true;} My $.ajax calls from the browser get a valid 200 OK response and go into the success handler. Before assuming everything is OK, I check if it's an ErrorModel or a model containing what I requested. If it's an ErrorModel, or null, I pass it to my error handler. If the client needs to handle different errors differently, ErrorModel can contain a flag, error code, string, etc. to differentiate, but again, sending as little information back as possible is ideal. Summary As any experienced ASP.NET developer knows, this is a far cry from where ASP.NET started when I began working with it 11 years ago. WCF services are far more powerful than ASMX ones, MVC is in many ways cleaner and certainly more unit test-friendly than Web Forms (if you don't consider the code/markup commingling you're doing again), the Enterprise Library makes error handling and logging almost entirely configuration-driven, AJAX makes a responsive UI more feasible, and jQuery makes JavaScript coding much less painful. It doesn't take much work to get a functional, maintainable, flexible application, though having it actually do something useful is a whole other matter.

Read the article

CodePlex Daily Summary for Saturday, June 18, 2011

CodePlex Daily Summary for Saturday, June 18, 2011Popular ReleasesEffectControls-Silverlight controls with animation effects: EffectControls: EffectControlsMedia Companion: MC 3.408b weekly: Some minor fixes..... Fixed messagebox coming up during batch scrape Added <originaltitle></originaltitle> to movie nfo's - when a new movie is scraped, the original title will be set as the returned title. The end user can of course change the title in MC, however the original title will not change. The original title can be seen by hovering over the movie title in the right pane of the main movie tab. To update all of your current nfo's to add the original title the same as your current ...NLog - Advanced .NET Logging: NLog 2.0 Release Candidate: Release notes for NLog 2.0 RC can be found at http://nlog-project.org/nlog-2-rc-release-notesPowerGUI Visual Studio Extension: PowerGUI VSX 1.3.5: Changes - VS SDK no longer required to be installed (a bug in v. 1.3.4).Gendering Add-In for Microsoft Office Word 2010: Gendering Add-In: This is the first stable Version of the Gendering Add-In. Unzip the package and start "setup.exe". The .reg file shows how to config an alternate path for suggestion table.TerrariViewer: TerrariViewer v3.1 [Terraria Inventory Editor]: This version adds tool tips. Almost every picture box you mouse over will tell you what item is in that box. I have also cleaned up the GUI a little more to make things easier on my end. There are various bug fixes including ones associated with opening different characters in the same instance of the program. As always, please bring any bugs you find to my attention.CommonLibrary.NET: CommonLibrary.NET - 0.9.7 Beta: A collection of very reusable code and components in C# 3.5 ranging from ActiveRecord, Csv, Command Line Parsing, Configuration, Holiday Calendars, Logging, Authentication, and much more. Samples in <root>\src\Lib\CommonLibrary.NET\Samples CommonLibrary.NET 0.9.7Documentation 6738 6503 New 6535 Enhancements 6583 6737DropBox Linker: DropBox Linker 1.2: Public sub-folders are now monitored for changes as well (thanks to mcm69) Automatic public sync folder detection (thanks to mcm69) Non-Latin and special characters encoded correctly in URLs Pop-ups are now slot-based (use first free slot and will never be overlapped — test it while previewing timeout) Public sync folder setting is hidden when auto-detected Timeout interval is displayed in popup previews A lot of major and minor code refactoring performed .NET Framework 4.0 Client...Terraria World Viewer: Version 1.3: Update June 15th Removed "Draw Markers" checkbox from main window because of redundancy/confusing. (Select all or no items from the Settings tab for the same effect.) Fixed Marker preferences not being saved. It is now possible to render more than one map without having to restart the application. World file will not be locked while the world is being rendered. Note: The World Viewer might render an inaccurate map or even crash if Terraria decides to modify the World file during the pro...MVC Controls Toolkit: Mvc Controls Toolkit 1.1.5 RC: Added Extended Dropdown allows a prompt item to be inserted as first element. RequiredAttribute, if present, trggers if no element is chosen Client side javascript function to set/get the values of DateTimeInput, TypedTextBox, TypedEditDisplay, and to bind/unbind a "change" handler The selected page in the pager is applied the attribute selected-page="selected" that can be used in the definition of CSS rules to style the selected page items controls now interpret a null value as an empr...Umbraco CMS: Umbraco CMS 5.0 CTP 1: Umbraco 5 Community Technology Preview Umbraco 5 will be the next version of everyone's favourite, friendly ASP.NET CMS that already powers over 100,000 websites worldwide. Try out our first CTP of version 5 today! If you're new to Umbraco and would like to get a quick low-down on our popular and easy-to-learn approach to content management, check out our intro video here. What's in the v5 CTP box? This is a preview version of version 5 and includes support for the following familiar Umbr...Coding4Fun Kinect Toolkit: Coding4Fun.Kinect Toolkit: Version 1.0Kinect Mouse Cursor: Kinect Mouse Cursor v1.0: The initial release of the Kinect Mouse Cursor project!patterns & practices: Project Silk: Project Silk Community Drop 11 - June 14, 2011: Changes from previous drop: Many code changes: please see the readme.mht for details. New "Client Data Management and Caching" chapter. Updated "Application Notifications" chapter. Updated "Architecture" chapter. Updated "jQuery UI Widget" chapter. Updated "Widget QuickStart" appendix and code. Guidance Chapters Ready for Review The Word documents for the chapters are included with the source code in addition to the CHM to help you provide feedback. The PDF is provided as a separat...Orchard Project: Orchard 1.2: Build: 1.2.41 Published: 6/14/2010 How to Install Orchard To install Orchard using Web PI, follow these instructions: http://www.orchardproject.net/docs/Installing-Orchard.ashx. Web PI will detect your hardware environment and install the application. Alternatively, to install the release manually, download the Orchard.Web.1.2.41.zip file. http://orchardproject.net/docs/Manually-installing-Orchard-zip-file.ashx The zip contents are pre-built and ready-to-run. Simply extract the contents o...Snippet Designer: Snippet Designer 1.4.0: Snippet Designer 1.4.0 for Visual Studio 2010 Change logSnippet Explorer ChangesReworked language filter UI to work better in the side bar. Added result count drop down which lets you choose how many results to see. Language filter and result count choices are persisted after Visual Studio is closed. Added file name to search criteria. Search is now case insensitive. Snippet Editor Changes Snippet Editor ChangesAdded menu option for the $end$ symbol which indicates where the c...Mobile Device Detection and Redirection: 1.0.4.1: Stable Release 51 Degrees.mobi Foundation is the best way to detect and redirect mobile devices and their capabilities on ASP.NET and is being used on thousands of websites worldwide. We’re highly confident in our software and we recommend all users update to this version. Changes to Version 1.0.4.1Changed the BlackberryHandler and BlackberryVersion6Handler to have equal CONFIDENCE values to ensure they both get a chance at detecting BlackBerry version 4&5 and version 6 devices. Prior to thi...Rawr: Rawr 4.1.06: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr AddonWe now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including bag and bank items) like Char...AcDown????? - Anime&Comic Downloader: AcDown????? v3.0 Beta6: ??AcDown?????????????，?????????????，????、????。?????Acfun????? ????32??64? Windows XP/Vista/7 ????????????? ??：????????Windows XP???,?????????.NET Framework 2.0???(x86)?.NET Framework 2.0???(x64)，?????"?????????"??? ??v3.0 Beta6 ?????(imanhua.com)????? ???? ?? ??"????","?????","?????","????"?????? "????"?????"????????"?? ??????????? ?????????????? ?????????????/???? ?? ????Windows 7???????????? ????????? ?? ????????????? ???????/??????????? ???????????? ?? ?? ?????(imanh...Pulse: Pulse Beta 2: - Added new wallpapers provider http://wallbase.cc. Supports english search, multiple keywords* - Improved font rendering in Options window - Added "Set wallpaper as logon background" option* - Fixed crashes if there is no internet connection - Fixed: Rewalls downloads empty images sometimes - Added filters* Note 1: wallbase provider supports only english search. Rewalls provider supports only russian search but Pulse automatically translates your english keyword into russian using Google Tr...New Projects.NET Entities Framework Utils: Project for creating supporting code to work with .NET Entity Framework.A Simple Demo of Industrial Process Monitoring System based on .NET & Arduino: The demo show some key points of .NET 1 .NET WPF 2 WCF 3 Sinverlight 4 ADO.Net The demo is a good sample for learing .NET and developing process monitoring system. The demo get temperture from Arduinot It is also a good Arduin sample.AHtml Pad: AHtml Pad is a powerfull html and css editor. It's made for beginnners and experimented programmers. It's made in vb.net with visual studio 2010Allena la mente: Raccolta di minigames per migliorare Memoria, Riflessi, Logica e Matematica. Applicazione in silverlight per Windows Phone. Carousel TeamAnorexia World: Ich habe ein kleines Project geschrieben dass mit einen MDI Formular eine komplette Office Suite (noch in hartz4) in einen verheint!AutomaSolution - IT Automation made easy!: AutomaSolution is a console application written in C#. It takes a single .xml file as input, and processes each section to perform an automation task. AzureManagmentAPI.NET: .NET Wrapper for Microsoft Windows Azure Service Managment REST API. It's developed in C# and uses .NET 4.0 Framework. More Information about the Windows Azure Service Management REST API can be found here: http://msdn.microsoft.com/en-us/library/ee460799.aspxCirrus: Projet en C# qui sert au recueillement de données multi-sites.Cruise Control .NET TV: Cruise Control .NET TV puts your project's integration status on a TV and adds coverage graphs generated through NCover.DBML Updater: External tool for Visual Studio which automatically updating DBML files, according to configuration files (XML). You can also specify rules for editing and deleting elements in DBML file. And supports source code generation on the end.EPiServer CMS Page Type Extensions: EPiServer PageTypeExtensions provide additional features related to page types in EPiServer CMS 6. They allow the developer to set restrictions on the number of pages that can be created under a page and also provide page type image preview functionality.Excel add-in library: Create Excel xll add-ins.Gendering Add-In for Microsoft Office Word 2010: Word Add-In that assists user by giving hints to write gender-neutral documents. The current function is a post-processing function to verify a written text against the rules of gender-neutral definition in German Language. The definitions are implemented in form of words and phrases and their gender-neutral replacement as a suggestion. The documentation is written in German. Word Add-In, das eine Unterstützung bietet, einen bereits geschriebenen Text zu überprüfen, nach einem definierten ...Kinductor: Kinductor puts you on the podium and in control of a full symphonic orchestra using just your hands and Kinect.LPFM Last.fm Scrobbler: LPFM Last.fm Scrobbler is a simple .NET API library for scrobbling to the Last.fm web service. It is designed for desktop, web and mobile applications that target the .NET 4 Framework. The library supports the Scrobble and Now Playing functionality of the Last.fm API version 2.0MDB RIA Service Generator: Auto-generates RIA service from a given mdb to create a lightswitch extension.mediaplayer-isen: super projet qui envoie du fat !!! ^^Metodología General Ajustada - MGA: Herramienta tecnológica que apoya la Metodología para la formulación y evaluación de Proyectos de Inversión Pública mejorada en Colombia. Metodología General Ajustada - MGA. Desarrollado en Visual C# 2008 y Base de datos SQL Server 2008.M-i-c-r-o-S-o-f-t-W-M-S: M8i8c8r8o8S8o8f8t M8i8c8r8o8S8o8f8t M8i8c8r8o8S8o8f8tmim: TBAMinecraft data viewing tools: A little toolset for Minecraft server. Contains a basic NBT reader and ingame map viewer.PHPCSERP: PHPCS ERP ????????????????????，???????????PDF???。 ???????????，??，??。 PHPCS ERP ??????????????????。 PHPCS ERP ?????????????，??????????????????????IT?????????????。 ??????????????? PHPCS ERP。 ??????IT?????????，??????????。Rangers Build Customization Guide: Scenario based and hands-on guidance for the customization and deployment of TFS Builds activities such as versioning, code signing, branching. Rangers Lab Management Guide: Practical and scenario-based guidance, backed by custom VM Template automation for reference environments Snail-Blog: ??asp.net?????SSIS Extensions - SFTP Task, PGP Task, Zip Task: A set of custom tasks to extend SSIS. Includes a SFTP task, PGP encryption task and zip/unzip task.stage: asp.net opensource testprojectTimeBook: Project Description A simple asp.net mvc project to manage time. The main reason for the project is to learn asp.net mvc. The end product will have the following features. Multiple companies/individuals can sign up. Each company/individual can add/remove/update their clients. UMDH Tracer: Tool that generates & exploits UMDH Dump so that leaks detection is easier.

Read the article

ASP.NET MVC 3 Hosting :: How to Deploy Web Apps Using ASP.NET MVC 3, Razor and EF Code First - Part II

- by mbridge

In previous post, I have discussed on how to work with ASP.NET MVC 3 and EF Code First for developing web apps. In this post, I will demonstrate on working with domain entity with deep object graph, Service Layer and View Models and will also complete the rest of the demo application. In the previous post, we have done CRUD operations against Category entity and this post will be focus on Expense entity those have an association with Category entity. Domain Model Category Entity public class Category { public int CategoryId { get; set; } [Required(ErrorMessage = "Name Required")] [StringLength(25, ErrorMessage = "Must be less than 25 characters")] public string Name { get; set;} public string Description { get; set; } public virtual ICollection<Expense> Expenses { get; set; } } Expense Entity public class Expense { public int ExpenseId { get; set; } public string Transaction { get; set; } public DateTime Date { get; set; } public double Amount { get; set; } public int CategoryId { get; set; } public virtual Category Category { get; set; } } We have two domain entities - Category and Expense. A single category contains a list of expense transactions and every expense transaction should have a Category. Repository class for Expense Transaction Let’s create repository class for handling CRUD operations for Expense entity public class ExpenseRepository : RepositoryBase<Expense>, IExpenseRepository { public ExpenseRepository(IDatabaseFactory databaseFactory) : base(databaseFactory) { } } public interface IExpenseRepository : IRepository<Expense> { } Service Layer If you are new to Service Layer, checkout Martin Fowler's article Service Layer . According to Martin Fowler, Service Layer defines an application's boundary and its set of available operations from the perspective of interfacing client layers. It encapsulates the application's business logic, controlling transactions and coordinating responses in the implementation of its operations. Controller classes should be lightweight and do not put much of business logic onto it. We can use the service layer as the business logic layer and can encapsulate the rules of the application. Let’s create a Service class for coordinates the transaction for Expense public interface IExpenseService { IEnumerable<Expense> GetExpenses(DateTime startDate, DateTime ednDate); Expense GetExpense(int id); void CreateExpense(Expense expense); void DeleteExpense(int id); void SaveExpense(); } public class ExpenseService : IExpenseService { private readonly IExpenseRepository expenseRepository; private readonly IUnitOfWork unitOfWork; public ExpenseService(IExpenseRepository expenseRepository, IUnitOfWork unitOfWork) { this.expenseRepository = expenseRepository; this.unitOfWork = unitOfWork; } public IEnumerable<Expense> GetExpenses(DateTime startDate, DateTime endDate) { var expenses = expenseRepository.GetMany(exp => exp.Date >= startDate && exp.Date <= endDate); return expenses; } public void CreateExpense(Expense expense) { expenseRepository.Add(expense); unitOfWork.Commit(); } public Expense GetExpense(int id) { var expense = expenseRepository.GetById(id); return expense; } public void DeleteExpense(int id) { var expense = expenseRepository.GetById(id); expenseRepository.Delete(expense); unitOfWork.Commit(); } public void SaveExpense() { unitOfWork.Commit(); } } View Model for Expense Transactions In real world ASP.NET MVC applications, we need to design model objects especially for our views. Our domain objects are mainly designed for the needs for domain model and it is representing the domain of our applications. On the other hand, View Model objects are designed for our needs for views. We have an Expense domain entity that has an association with Category. While we are creating a new Expense, we have to specify that in which Category belongs with the new Expense transaction. The user interface for Expense transaction will have form fields for representing the Expense entity and a CategoryId for representing the Category. So let's create view model for representing the need for Expense transactions. public class ExpenseViewModel { public int ExpenseId { get; set; } [Required(ErrorMessage = "Category Required")] public int CategoryId { get; set; } [Required(ErrorMessage = "Transaction Required")] public string Transaction { get; set; } [Required(ErrorMessage = "Date Required")] public DateTime Date { get; set; } [Required(ErrorMessage = "Amount Required")] public double Amount { get; set; } public IEnumerable<SelectListItem> Category { get; set; } } The ExpenseViewModel is designed for the purpose of View template and contains the all validation rules. It has properties for mapping values to Expense entity and a property Category for binding values to a drop-down for list values of Category. Create Expense transaction Let’s create action methods in the ExpenseController for creating expense transactions public ActionResult Create() { var expenseModel = new ExpenseViewModel(); var categories = categoryService.GetCategories(); expenseModel.Category = categories.ToSelectListItems(-1); expenseModel.Date = DateTime.Today; return View(expenseModel); } [HttpPost] public ActionResult Create(ExpenseViewModel expenseViewModel) { if (!ModelState.IsValid) { var categories = categoryService.GetCategories(); expenseViewModel.Category = categories.ToSelectListItems(expenseViewModel.CategoryId); return View("Save", expenseViewModel); } Expense expense=new Expense(); ModelCopier.CopyModel(expenseViewModel,expense); expenseService.CreateExpense(expense); return RedirectToAction("Index"); } In the Create action method for HttpGet request, we have created an instance of our View Model ExpenseViewModel with Category information for the drop-down list and passing the Model object to View template. The extension method ToSelectListItems is shown below public static IEnumerable<SelectListItem> ToSelectListItems( this IEnumerable<Category> categories, int selectedId) { return categories.OrderBy(category => category.Name) .Select(category => new SelectListItem { Selected = (category.CategoryId == selectedId), Text = category.Name, Value = category.CategoryId.ToString() }); } In the Create action method for HttpPost, our view model object ExpenseViewModel will map with posted form input values. We need to create an instance of Expense for the persistence purpose. So we need to copy values from ExpenseViewModel object to Expense object. ASP.NET MVC futures assembly provides a static class ModelCopier that can use for copying values between Model objects. ModelCopier class has two static methods - CopyCollection and CopyModel.CopyCollection method will copy values between two collection objects and CopyModel will copy values between two model objects. We have used CopyModel method of ModelCopier class for copying values from expenseViewModel object to expense object. Finally we did a call to CreateExpense method of ExpenseService class for persisting new expense transaction. List Expense Transactions We want to list expense transactions based on a date range. So let’s create action method for filtering expense transactions with a specified date range. public ActionResult Index(DateTime? startDate, DateTime? endDate) { //If date is not passed, take current month's first and last dte DateTime dtNow; dtNow = DateTime.Today; if (!startDate.HasValue) { startDate = new DateTime(dtNow.Year, dtNow.Month, 1); endDate = startDate.Value.AddMonths(1).AddDays(-1); } //take last date of start date's month, if end date is not passed if (startDate.HasValue && !endDate.HasValue) { endDate = (new DateTime(startDate.Value.Year, startDate.Value.Month, 1)).AddMonths(1).AddDays(-1); } var expenses = expenseService.GetExpenses(startDate.Value ,endDate.Value); //if request is Ajax will return partial view if (Request.IsAjaxRequest()) { return PartialView("ExpenseList", expenses); } //set start date and end date to ViewBag dictionary ViewBag.StartDate = startDate.Value.ToShortDateString(); ViewBag.EndDate = endDate.Value.ToShortDateString(); //if request is not ajax return View(expenses); } We are using the above Index Action method for both Ajax requests and normal requests. If there is a request for Ajax, we will call the PartialView ExpenseList. Razor Views for listing Expense information Let’s create view templates in Razor for showing list of Expense information ExpenseList.cshtml @model IEnumerable<MyFinance.Domain.Expense> <table> <tr> <th>Actions</th> <th>Category</th> <th> Transaction </th> <th> Date </th> <th> Amount </th> </tr> @foreach (var item in Model) { <tr> <td> @Html.ActionLink("Edit", "Edit",new { id = item.ExpenseId }) @Ajax.ActionLink("Delete", "Delete", new { id = item.ExpenseId }, new AjaxOptions { Confirm = "Delete Expense?", HttpMethod = "Post", UpdateTargetId = "divExpenseList" }) </td> <td> @item.Category.Name </td> <td> @item.Transaction </td> <td> @String.Format("{0:d}", item.Date) </td> <td> @String.Format("{0:F}", item.Amount) </td> </tr> } </table> <p> @Html.ActionLink("Create New Expense", "Create") | @Html.ActionLink("Create New Category", "Create","Category") </p> Index.cshtml @using MyFinance.Helpers; @model IEnumerable<MyFinance.Domain.Expense> @{ ViewBag.Title = "Index"; } <h2>Expense List</h2> <script src="@Url.Content("~/Scripts/jquery.unobtrusive-ajax.min.js")" type="text/javascript"></script> <script src="@Url.Content("~/Scripts/jquery-ui.js")" type="text/javascript"></script> <script src="@Url.Content("~/Scripts/jquery.ui.datepicker.js")" type="text/javascript"></script> <link href="@Url.Content("~/Content/jquery-ui-1.8.6.custom.css")" rel="stylesheet" type="text/css" /> @using (Ajax.BeginForm(new AjaxOptions{ UpdateTargetId="divExpenseList", HttpMethod="Get"})) { <table> <tr> <td> <div> Start Date: @Html.TextBox("StartDate", Html.Encode(String.Format("{0:mm/dd/yyyy}", ViewData["StartDate"].ToString())), new { @class = "ui-datepicker" }) </div> </td> <td><div> End Date: @Html.TextBox("EndDate", Html.Encode(String.Format("{0:mm/dd/yyyy}", ViewData["EndDate"].ToString())), new { @class = "ui-datepicker" }) </div></td> <td> <input type="submit" value="Search By TransactionDate" /></td> </tr> </table> } <div id="divExpenseList"> @Html.Partial("ExpenseList", Model) </div> <script type="text/javascript"> $().ready(function () { $('.ui-datepicker').datepicker({ dateFormat: 'mm/dd/yy', buttonImage: '@Url.Content("~/Content/calendar.gif")', buttonImageOnly: true, showOn: "button" }); }); </script> Ajax search functionality using Ajax.BeginForm The search functionality of Index view is providing Ajax functionality using Ajax.BeginForm. The Ajax.BeginForm() method writes an opening <form> tag to the response. You can use this method in a using block. In that case, the method renders the closing </form> tag at the end of the using block and the form is submitted asynchronously by using JavaScript. The search functionality will call the Index Action method and this will return partial view ExpenseList for updating the search result. We want to update the response UI for the Ajax request onto divExpenseList element. So we have specified the UpdateTargetId as "divExpenseList" in the Ajax.BeginForm method. Add jQuery DatePicker Our search functionality is using a date range so we are providing two date pickers using jQuery datepicker. You need to add reference to the following JavaScript files to working with jQuery datepicker. - jquery-ui.js - jquery.ui.datepicker.js For theme support for datepicker, we can use a customized CSS class. In our example we have used a CSS file “jquery-ui-1.8.6.custom.css”. For more details about the datepicker component, visit jquery UI website at http://jqueryui.com/demos/datepicker . In the jQuery ready event, we have used following JavaScript function to initialize the UI element to show date picker. <script type="text/javascript"> $().ready(function () { $('.ui-datepicker').datepicker({ dateFormat: 'mm/dd/yy', buttonImage: '@Url.Content("~/Content/calendar.gif")', buttonImageOnly: true, showOn: "button" }); }); </script> Summary In this two-part series, we have created a simple web application using ASP.NET MVC 3 RTM, Razor and EF Code First CTP 5. I have demonstrated patterns and practices such as Dependency Injection, Repository pattern, Unit of Work, ViewModel and Service Layer. My primary objective was to demonstrate different practices and options for developing web apps using ASP.NET MVC 3 and EF Code First. You can implement these approaches in your own way for building web apps using ASP.NET MVC 3. I will refactor this demo app on later time.

Read the article

in MSSQL Server 2005 Dev Edition, I faced index corruption

- by tranhuyhung

Hi all, When running stored procedures in MSSQL Server, I found it failed and the DBMS (MSSQL Server 2005 Dev Edition) notified that some indexes are corrupted. Please advice me, here below is DBCC logs: DBCC results for 'itopup_dev'. Service Broker Msg 9675, State 1: Message Types analyzed: 14. Service Broker Msg 9676, State 1: Service Contracts analyzed: 6. Service Broker Msg 9667, State 1: Services analyzed: 3. Service Broker Msg 9668, State 1: Service Queues analyzed: 3. Service Broker Msg 9669, State 1: Conversation Endpoints analyzed: 0. Service Broker Msg 9674, State 1: Conversation Groups analyzed: 0. Service Broker Msg 9670, State 1: Remote Service Bindings analyzed: 0. DBCC results for 'sys.sysrowsetcolumns'. There are 1148 rows in 14 pages for object "sys.sysrowsetcolumns". DBCC results for 'sys.sysrowsets'. There are 187 rows in 2 pages for object "sys.sysrowsets". DBCC results for 'sysallocunits'. There are 209 rows in 3 pages for object "sysallocunits". DBCC results for 'sys.sysfiles1'. There are 2 rows in 1 pages for object "sys.sysfiles1". DBCC results for 'sys.syshobtcolumns'. There are 1148 rows in 14 pages for object "sys.syshobtcolumns". DBCC results for 'sys.syshobts'. There are 187 rows in 2 pages for object "sys.syshobts". DBCC results for 'sys.sysftinds'. There are 0 rows in 0 pages for object "sys.sysftinds". DBCC results for 'sys.sysserefs'. There are 209 rows in 1 pages for object "sys.sysserefs". DBCC results for 'sys.sysowners'. There are 15 rows in 1 pages for object "sys.sysowners". DBCC results for 'sys.sysprivs'. There are 135 rows in 1 pages for object "sys.sysprivs". DBCC results for 'sys.sysschobjs'. There are 817 rows in 21 pages for object "sys.sysschobjs". DBCC results for 'sys.syscolpars'. There are 2536 rows in 71 pages for object "sys.syscolpars". DBCC results for 'sys.sysnsobjs'. There are 1 rows in 1 pages for object "sys.sysnsobjs". DBCC results for 'sys.syscerts'. There are 0 rows in 0 pages for object "sys.syscerts". DBCC results for 'sys.sysxprops'. There are 12 rows in 4 pages for object "sys.sysxprops". DBCC results for 'sys.sysscalartypes'. There are 27 rows in 1 pages for object "sys.sysscalartypes". DBCC results for 'sys.systypedsubobjs'. There are 0 rows in 0 pages for object "sys.systypedsubobjs". DBCC results for 'sys.sysidxstats'. There are 466 rows in 15 pages for object "sys.sysidxstats". DBCC results for 'sys.sysiscols'. There are 616 rows in 6 pages for object "sys.sysiscols". DBCC results for 'sys.sysbinobjs'. There are 23 rows in 1 pages for object "sys.sysbinobjs". DBCC results for 'sys.sysobjvalues'. There are 1001 rows in 376 pages for object "sys.sysobjvalues". DBCC results for 'sys.sysclsobjs'. There are 14 rows in 1 pages for object "sys.sysclsobjs". DBCC results for 'sys.sysrowsetrefs'. There are 0 rows in 0 pages for object "sys.sysrowsetrefs". DBCC results for 'sys.sysremsvcbinds'. There are 0 rows in 0 pages for object "sys.sysremsvcbinds". DBCC results for 'sys.sysxmitqueue'. There are 0 rows in 0 pages for object "sys.sysxmitqueue". DBCC results for 'sys.sysrts'. There are 1 rows in 1 pages for object "sys.sysrts". DBCC results for 'sys.sysconvgroup'. There are 0 rows in 0 pages for object "sys.sysconvgroup". DBCC results for 'sys.sysdesend'. There are 0 rows in 0 pages for object "sys.sysdesend". DBCC results for 'sys.sysdercv'. There are 0 rows in 0 pages for object "sys.sysdercv". DBCC results for 'sys.syssingleobjrefs'. There are 317 rows in 2 pages for object "sys.syssingleobjrefs". DBCC results for 'sys.sysmultiobjrefs'. There are 3607 rows in 37 pages for object "sys.sysmultiobjrefs". DBCC results for 'sys.sysdbfiles'. There are 2 rows in 1 pages for object "sys.sysdbfiles". DBCC results for 'sys.sysguidrefs'. There are 0 rows in 0 pages for object "sys.sysguidrefs". DBCC results for 'sys.sysqnames'. There are 91 rows in 1 pages for object "sys.sysqnames". DBCC results for 'sys.sysxmlcomponent'. There are 93 rows in 1 pages for object "sys.sysxmlcomponent". DBCC results for 'sys.sysxmlfacet'. There are 97 rows in 1 pages for object "sys.sysxmlfacet". DBCC results for 'sys.sysxmlplacement'. There are 17 rows in 1 pages for object "sys.sysxmlplacement". DBCC results for 'sys.sysobjkeycrypts'. There are 0 rows in 0 pages for object "sys.sysobjkeycrypts". DBCC results for 'sys.sysasymkeys'. There are 0 rows in 0 pages for object "sys.sysasymkeys". DBCC results for 'sys.syssqlguides'. There are 0 rows in 0 pages for object "sys.syssqlguides". DBCC results for 'sys.sysbinsubobjs'. There are 0 rows in 0 pages for object "sys.sysbinsubobjs". DBCC results for 'TBL_BONUS_TEMPLATES'. There are 0 rows in 0 pages for object "TBL_BONUS_TEMPLATES". DBCC results for 'TBL_ROLE_PAGE_GROUP'. There are 18 rows in 1 pages for object "TBL_ROLE_PAGE_GROUP". DBCC results for 'TBL_BONUS_LEVELS'. There are 0 rows in 0 pages for object "TBL_BONUS_LEVELS". DBCC results for 'TBL_SUPERADMIN'. There are 1 rows in 1 pages for object "TBL_SUPERADMIN". DBCC results for 'TBL_ADMIN_ROLES'. There are 11 rows in 1 pages for object "TBL_ADMIN_ROLES". DBCC results for 'TBL_ADMIN_USER_ROLE'. There are 42 rows in 1 pages for object "TBL_ADMIN_USER_ROLE". DBCC results for 'TBL_BONUS_CALCULATION_HISTORIES'. There are 0 rows in 0 pages for object "TBL_BONUS_CALCULATION_HISTORIES". DBCC results for 'TBL_MERCHANT_MOBILES'. There are 0 rows in 0 pages for object "TBL_MERCHANT_MOBILES". DBCC results for 'TBL_ARCHIVE_EXPORTED_SOFTPINS'. There are 16030918 rows in 35344 pages for object "TBL_ARCHIVE_EXPORTED_SOFTPINS". DBCC results for 'TBL_ARCHIVE_LOGS'. There are 280 rows in 2 pages for object "TBL_ARCHIVE_LOGS". DBCC results for 'TBL_ADMIN_USERS'. There are 29 rows in 1 pages for object "TBL_ADMIN_USERS". DBCC results for 'TBL_SYSTEM_ALERT_GROUPS'. There are 4 rows in 1 pages for object "TBL_SYSTEM_ALERT_GROUPS". DBCC results for 'TBL_EXPORTED_TRANSACTIONS'. There are 7848 rows in 89 pages for object "TBL_EXPORTED_TRANSACTIONS". DBCC results for 'TBL_SYSTEM_ALERTS'. There are 968 rows in 9 pages for object "TBL_SYSTEM_ALERTS". DBCC results for 'TBL_SYSTEM_ALERT_GROUP_MEMBERS'. There are 1 rows in 1 pages for object "TBL_SYSTEM_ALERT_GROUP_MEMBERS". DBCC results for 'TBL_ESTIMATED_TIME'. There are 11 rows in 1 pages for object "TBL_ESTIMATED_TIME". DBCC results for 'TBL_SYSTEM_ALERT_MEMBERS'. There are 0 rows in 1 pages for object "TBL_SYSTEM_ALERT_MEMBERS". DBCC results for 'TBL_COMMISSIONS'. There are 10031 rows in 106 pages for object "TBL_COMMISSIONS". DBCC results for 'TBL_CATEGORIES'. There are 3 rows in 1 pages for object "TBL_CATEGORIES". DBCC results for 'TBL_SERVICE_PROVIDERS'. There are 11 rows in 1 pages for object "TBL_SERVICE_PROVIDERS". DBCC results for 'TBL_CATEGORY_SERVICE_PROVIDER'. There are 11 rows in 1 pages for object "TBL_CATEGORY_SERVICE_PROVIDER". DBCC results for 'TBL_PRODUCTS'. There are 73 rows in 6 pages for object "TBL_PRODUCTS". DBCC results for 'TBL_MERCHANT_KEYS'. There are 291 rows in 30 pages for object "TBL_MERCHANT_KEYS". DBCC results for 'TBL_POS_UNLOCK_KEYS'. There are 0 rows in 0 pages for object "TBL_POS_UNLOCK_KEYS". DBCC results for 'TBL_POS'. There are 0 rows in 0 pages for object "TBL_POS". DBCC results for 'TBL_IMPORT_BATCHES'. There are 3285 rows in 84 pages for object "TBL_IMPORT_BATCHES". DBCC results for 'TBL_IMPORT_KEYS'. There are 2 rows in 1 pages for object "TBL_IMPORT_KEYS". DBCC results for 'TBL_PRODUCT_COMMISSION_TEMPLATES'. There are 634 rows in 4 pages for object "TBL_PRODUCT_COMMISSION_TEMPLATES". DBCC results for 'TBL_POS_SETTLE_TRANSACTIONS'. There are 0 rows in 0 pages for object "TBL_POS_SETTLE_TRANSACTIONS". DBCC results for 'TBL_CHANGE_KEY_SOFTPINS'. There are 0 rows in 1 pages for object "TBL_CHANGE_KEY_SOFTPINS". DBCC results for 'TBL_POS_RETURN_TRANSACTIONS'. There are 0 rows in 0 pages for object "TBL_POS_RETURN_TRANSACTIONS". DBCC results for 'TBL_POS_SOFTPINS'. There are 0 rows in 0 pages for object "TBL_POS_SOFTPINS". DBCC results for 'TBL_POS_MENUS'. There are 0 rows in 0 pages for object "TBL_POS_MENUS". DBCC results for 'TBL_COMMISSION_TEMPLATES'. There are 23 rows in 1 pages for object "TBL_COMMISSION_TEMPLATES". DBCC results for 'TBL_DOWNLOAD_TRANSACTIONS'. There are 170820 rows in 1789 pages for object "TBL_DOWNLOAD_TRANSACTIONS". DBCC results for 'TBL_IMPORT_TEMP_SOFTPINS'. There are 0 rows in 1 pages for object "TBL_IMPORT_TEMP_SOFTPINS". DBCC results for 'TBL_REGIONS'. There are 2 rows in 1 pages for object "TBL_REGIONS". DBCC results for 'TBL_SOFTPINS'. There are 9723677 rows in 126611 pages for object "TBL_SOFTPINS". DBCC results for 'sysdiagrams'. There are 0 rows in 0 pages for object "sysdiagrams". DBCC results for 'TBL_SYNCHRONIZE_TRANSACTIONS'. There are 9302 rows in 53 pages for object "TBL_SYNCHRONIZE_TRANSACTIONS". DBCC results for 'TBL_SALEMEN'. There are 32 rows in 1 pages for object "TBL_SALEMEN". DBCC results for 'TBL_RESERVATION_SOFTPINS'. There are 131431 rows in 1629 pages for object "TBL_RESERVATION_SOFTPINS". DBCC results for 'TBL_SYNCHRONIZE_TRANSACTION_ITEMS'. There are 5345 rows in 16 pages for object "TBL_SYNCHRONIZE_TRANSACTION_ITEMS". DBCC results for 'TBL_ACCOUNTS'. There are 1 rows in 1 pages for object "TBL_ACCOUNTS". DBCC results for 'TBL_SYNCHRONIZE_TRANSACTION_SOFTPIN'. There are 821988 rows in 2744 pages for object "TBL_SYNCHRONIZE_TRANSACTION_SOFTPIN". *DBCC results for 'TBL_EXPORTED_SOFTPINS'. Msg 8928, Level 16, State 1, Line 1 Object ID 1716917188, index ID 1, partition ID 72057594046119936, alloc unit ID 72057594050838528 (type In-row data): Page (1:677314) could not be processed. See other errors for details. Msg 8939, Level 16, State 7, Line 1 Table error: Object ID 1716917188, index ID 1, partition ID 72057594046119936, alloc unit ID 72057594050838528 (type In-row data), page (1:677314). Test (m_freeData = PAGEHEADSIZE && m_freeData <= (UINT)PAGESIZE - m_slotCnt * sizeof (Slot)) failed. Values are 15428 and 7240. There are 2267937 rows in 6133 pages for object "TBL_EXPORTED_SOFTPINS". CHECKDB found 0 allocation errors and 2 consistency errors in table 'TBL_EXPORTED_SOFTPINS' (object ID 1716917188).* DBCC results for 'TBL_DOWNLOAD_SOFTPINS'. There are 7029404 rows in 17999 pages for object "TBL_DOWNLOAD_SOFTPINS". DBCC results for 'TBL_MERCHANT_BALANCE_CREDIT_PAID'. There are 0 rows in 0 pages for object "TBL_MERCHANT_BALANCE_CREDIT_PAID". DBCC results for 'TBL_ARCHIVE_SOFTPINS'. There are 44015040 rows in 683692 pages for object "TBL_ARCHIVE_SOFTPINS". DBCC results for 'TBL_ACCOUNT_BALANCE_LOGS'. There are 0 rows in 0 pages for object "TBL_ACCOUNT_BALANCE_LOGS". DBCC results for 'TBL_BLOCK_BATCHES'. There are 23 rows in 1 pages for object "TBL_BLOCK_BATCHES". DBCC results for 'TBL_BLOCK_BATCH_SOFTPIN'. There are 396 rows in 1 pages for object "TBL_BLOCK_BATCH_SOFTPIN". DBCC results for 'TBL_MERCHANTS'. There are 290 rows in 22 pages for object "TBL_MERCHANTS". DBCC results for 'TBL_DOWNLOAD_TRANSACTION_ITEMS'. There are 189296 rows in 1241 pages for object "TBL_DOWNLOAD_TRANSACTION_ITEMS". DBCC results for 'TBL_BLOCK_BATCH_CONDITIONS'. There are 23 rows in 1 pages for object "TBL_BLOCK_BATCH_CONDITIONS". DBCC results for 'TBL_SP_ADVERTISEMENTS'. There are 6 rows in 1 pages for object "TBL_SP_ADVERTISEMENTS". DBCC results for 'TBL_SERVER_KEYS'. There are 1 rows in 1 pages for object "TBL_SERVER_KEYS". DBCC results for 'TBL_ARCHIVE_DOWNLOAD_SOFTPINS'. There are 27984122 rows in 60773 pages for object "TBL_ARCHIVE_DOWNLOAD_SOFTPINS". DBCC results for 'TBL_ACCOUNT_BALANCE_REQUESTS'. There are 0 rows in 0 pages for object "TBL_ACCOUNT_BALANCE_REQUESTS". DBCC results for 'TBL_MERCHANT_TERMINALS'. There are 633 rows in 4 pages for object "TBL_MERCHANT_TERMINALS". DBCC results for 'TBL_SP_PREFIXES'. There are 6 rows in 1 pages for object "TBL_SP_PREFIXES". DBCC results for 'TBL_DIRECT_TOPUP_TRANSACTIONS'. There are 43 rows in 1 pages for object "TBL_DIRECT_TOPUP_TRANSACTIONS". DBCC results for 'TBL_MERCHANT_BALANCE_REQUESTS'. There are 19367 rows in 171 pages for object "TBL_MERCHANT_BALANCE_REQUESTS". DBCC results for 'TBL_ACTION_LOGS'. There are 133714 rows in 1569 pages for object "TBL_ACTION_LOGS". DBCC results for 'sys.queue_messages_1977058079'. There are 0 rows in 0 pages for object "sys.queue_messages_1977058079". DBCC results for 'sys.queue_messages_2009058193'. There are 0 rows in 0 pages for object "sys.queue_messages_2009058193". DBCC results for 'TBL_CODES'. There are 98 rows in 1 pages for object "TBL_CODES". DBCC results for 'TBL_MERCHANT_BALANCE_LOGS'. There are 183498 rows in 3178 pages for object "TBL_MERCHANT_BALANCE_LOGS". DBCC results for 'TBL_MERCHANT_CHANNEL_TEMPLATE'. There are 397 rows in 2 pages for object "TBL_MERCHANT_CHANNEL_TEMPLATE". DBCC results for 'sys.queue_messages_2041058307'. There are 0 rows in 0 pages for object "sys.queue_messages_2041058307". DBCC results for 'TBL_VNPTEPAY'. There are 0 rows in 0 pages for object "TBL_VNPTEPAY". DBCC results for 'TBL_PAGE_GROUPS'. There are 10 rows in 1 pages for object "TBL_PAGE_GROUPS". DBCC results for 'TBL_PAGE_GROUP_PAGE'. There are 513 rows in 2 pages for object "TBL_PAGE_GROUP_PAGE". DBCC results for 'TBL_ACCOUNT_CHANNEL_TEMPLATE'. There are 0 rows in 0 pages for object "TBL_ACCOUNT_CHANNEL_TEMPLATE". DBCC results for 'TBL_PAGES'. There are 148 rows in 3 pages for object "TBL_PAGES". CHECKDB found 0 allocation errors and 2 consistency errors in database 'itopup_dev'. repair_allow_data_loss is the minimum repair level for the errors found by DBCC CHECKDB (itopup_dev). DBCC execution completed. If DBCC printed error messages, contact your system administrator.

Read the article

Puppet nodes cant' find master, ec2 public versus internal ip addresses and hosts files

- by Blankman

If I setup my hosts files such that they reference all other ec2 nodes using the internal ip addresses, will this work or do I have to use the external ip addresses? Do I need to specify anything in my security group to get internal ip addresses to work? e.g. /etc/hosts ip-10-11-12-13.internal some_node_name If I do this, can I reference some_node_name anywhere in my scripts where I would have used the ip address previously? On my puppet agent servers, I have a reference to my puppet master like: public-ip-here puppet When I reboot my puppet agent's, syslog shows they couldn't find the master with the message: getaddinfo : name or service not known I did get it to work by updating /etc/default/puppet and I added to the options: --server=public-ip-here From what I read, puppet will by default try using 'puppet', and I set this in my hosts file so why wouldn't it be picking this up?

Read the article

trying to use mod_proxy with httpd and tomcat

- by techsjs2012

I been trying to use mod_proxy with httpd and tomcat... I have on VirtualBox running Scientific Linux which has httpd and tomcat 6 on it.. I made two nodes of tomcat6. I followed this guide like 10 times and still cant get the 2nd node of tomcat working.. http://www.richardnichols.net/2010/08/5-minute-guide-clustering-apache-tomcat/ Here is the lines from my http.conf file <Proxy balancer://testcluster stickysession=JSESSIONID> BalancerMember ajp://127.0.0.1:8009 min=10 max=100 route=node1 loadfactor=1 BalancerMember ajp://127.0.0.1:8109 min=10 max=100 route=node2 loadfactor=1 </Proxy> ProxyPass /examples balancer://testcluster/examples <Location /balancer-manager> SetHandler balancer-manager AuthType Basic AuthName "Balancer Manager" AuthUserFile "/etc/httpd/conf/.htpasswd" Require valid-user </Location> Now here is my server.xml from node1 <?xml version='1.0' encoding='utf-8'?>   <Server port="8005" shutdown="SHUTDOWN">  <Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" />  <Listener className="org.apache.catalina.core.JasperListener" />  <Listener className="org.apache.catalina.core.JreMemoryLeakPreventionListener" />  <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" /> <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />  <GlobalNamingResources>  <Resource name="UserDatabase" auth="Container" type="org.apache.catalina.UserDatabase" description="User database that can be updated and saved" factory="org.apache.catalina.users.MemoryUserDatabaseFactory" pathname="conf/tomcat-users.xml" /> </GlobalNamingResources>  <Service name="Catalina">         <Connector port="8009" protocol="AJP/1.3" redirectPort="8443" />   <Engine name="Catalina" defaultHost="localhost" jvmRoute="node1">      <Realm className="org.apache.catalina.realm.UserDatabaseRealm" resourceName="UserDatabase"/>  <Host name="localhost" appBase="webapps" unpackWARs="true" autoDeploy="true" xmlValidation="false" xmlNamespaceAware="false">     </Host> </Engine> </Service> </Server> now here is the server.xml file from node2 <?xml version='1.0' encoding='utf-8'?>   <Server port="8105" shutdown="SHUTDOWN">  <Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" />  <Listener className="org.apache.catalina.core.JasperListener" />  <Listener className="org.apache.catalina.core.JreMemoryLeakPreventionListener" />  <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" /> <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />  <GlobalNamingResources>  <Resource name="UserDatabase" auth="Container" type="org.apache.catalina.UserDatabase" description="User database that can be updated and saved" factory="org.apache.catalina.users.MemoryUserDatabaseFactory" pathname="conf/tomcat-users.xml" /> </GlobalNamingResources>  <Service name="Catalina">         <Connector port="8109" protocol="AJP/1.3" redirectPort="8443" />   <Engine name="Catalina" defaultHost="localhost" jvmRoute="node2">      <Realm className="org.apache.catalina.realm.UserDatabaseRealm" resourceName="UserDatabase"/>  <Host name="localhost" appBase="webapps" unpackWARs="true" autoDeploy="true" xmlValidation="false" xmlNamespaceAware="false">     </Host> </Engine> </Service> </Server> I dont know what it is. but I been trying for days

Read the article

Keyboard shortcut / navigation references

- by jerryjvl

I use the mouse much too freely, and my wrists are not thanking me for it. I have been meaning to try and use the keyboard more as my sole means of navigating Windows, but I am having trouble sticking with it because when I need to do something and I cannot find the right shortcut, I grab the mouse and forget to let go of it again. Personally, the main software that I need keyboard reference sheets for would be: Firefox Thunderbird Visual Studio Windows itself But I would encourage more general inclusion of shortcut references in the answers in case anyone else tries to make the same transition I am attempting ;) What I am looking for is reference material that is as comprehensive as possible so that over time I can hopefully learn to do everything with the keyboard and spare my wrists. Bonus points for references that can be printed in a reasonable size so I can keep them next to my machine in hardcopy. I know there is an answer for Windows already: Is there a definitive reference for Windows shortcuts keys?, but I am leaving it in my question in case anyone has a better printable alternative.

Read the article

How can I get GrowlTunes to Launch whenever iTunes Launches?

- by Orion751

I think I would be able to do this by modifying iTunes' launch services. Any idea how to go about that? Would editing its info.plist file in a manner similar to below do what I'm looking for? <keyLSOpenApplication</key <string?</string EDIT: Would http://developer.apple.com/library/mac/#documentation/Carbon/Reference/LaunchServicesReference/Reference/reference.html%23//apple_ref/c/func/LSOpenApplication provide any hints? EDIT2: Last.fm's official Mac Scrobbler (http://www.last.fm/download) is a perfect example of the functionality that I'm looking for.

Read the article

Complex SQL query help on aggregating values for nested subquery

- by François Beausoleil

Hi! I have people, companies, employees, events and event kinds. I'm making a report/followup sheet where people, companies and employees are the rows, and the columns are event kinds. Event kinds are simple values describing: "Promised Donation", "Received Donation", "Phoned", "Followed up" and such. Event kinds are ordered: CREATE TABLE event_kinds ( id, name, position); Events hold the actual reference to the event: CREATE TABLE events ( id, person_id, company_id, referrer_id, event_kind_id, created_at); referrer_id is another reference to people. It is the person which sent the information/tip along, and is an optional field, although I sometimes want to filter on an event_kind that has a specific referrer, while I don't for other event kinds. Notice I don't have an employee ID reference. The reference exists, but is implied. I have application code to validate that person_id and company_id really reference an employee record. The other tables are pretty basic: CREATE TABLE people ( id, name); CREATE TABLE companies ( id, name); CREATE TABLE employees ( id, person_id, company_id); I'm trying to achieve the following report: Referrer Phoned Promised Donated Francois Feb 16th Feb 20th Mar 1st Apple (Steve Jobs) Steve Ballmer Mar 3rd IBM Bill Gates Mar 7th The first row is a people record, the 2nd is an employee, and the 3rd is a company. If I asked for referrer Bill Gates for Phoned event kinds, I'd only see the 3rd row, while asking for Steve and Phoned would return no rows. Right now, I do 3 queries, one for companies, one for people and a last one for employees. I want the event kind columns to be ordered, but I do that in application code and show it properly there. Here's where I'm at so far: SELECT companies.id, companies.name, (SELECT events.id FROM events WHERE events.referrer_id = 1470 AND events.company_id = companies.id AND events.person_id IS NULL AND events.event_kind_id = 9 ORDER BY created_at DESC LIMIT 1) event_kind_9, (SELECT events.id FROM events WHERE events.company_id = companies.id AND events.person_id IS NULL AND events.event_kind_id = 10 ORDER BY created_at DESC LIMIT 1) event_kind_10, (SELECT events.created_at FROM events WHERE events.referrer_id = 1470 AND events.company_id = companies.id AND events.person_id IS NULL AND events.event_kind_id = 9 ORDER BY created_at DESC LIMIT 1) event_kind_9_order FROM "companies" SELECT people.id, people.name, (SELECT events.id FROM events WHERE events.referrer_id = 1470 AND events.company_id IS NULL AND events.person_id = people.id AND events.event_kind_id = 9 ORDER BY created_at DESC LIMIT 1) event_kind_9, (SELECT events.id FROM events WHERE events.company_id IS NULL AND events.person_id = people.id AND events.event_kind_id = 10 ORDER BY created_at DESC LIMIT 1) event_kind_10, (SELECT events.created_at FROM events WHERE events.referrer_id = 1470 AND events.company_id IS NULL AND events.person_id = people.id AND events.event_kind_id = 9 ORDER BY created_at DESC LIMIT 1) event_kind_9_order FROM "people" SELECT employees.id, employees.company_id, employees.person_id, (SELECT events.id FROM events WHERE events.referrer_id = 1470 AND events.company_id = employees.company_id AND events.person_id = employees.person_id AND events.event_kind_id = 9 ORDER BY created_at DESC LIMIT 1) event_kind_9, (SELECT events.id FROM events WHERE events.company_id = employees.company_id AND events.person_id = employees.person_id AND events.event_kind_id = 10 ORDER BY created_at DESC LIMIT 1) event_kind_10, (SELECT events.created_at FROM events WHERE events.referrer_id = 1470 AND events.company_id = employees.company_id AND events.person_id = employees.person_id AND events.event_kind_id = 9 ORDER BY created_at DESC LIMIT 1) event_kind_9_order FROM "employees" I rather suspect I'm doing this wrong. There should be an "easier" way to do it. One other filter criteria would be to filter on people/company names: WHERE LOWER(companies.name) LIKE '%apple%'. Note that I'm ordering by the dates of event_kind_9 here, and a secondary sort is by person/company name. To summarize: I want to paginate the result set, find the latest event for each cell, order the result set by the date of the latest event, and by company/person name, filter by referrer in some event kinds, but not others. For reference, I'm using PostgreSQL, from Ruby, ActiveRecord/Rails. The solution is pure SQL though.

Read the article

jQuery DataTables server side processing and ASP.Net

- by Chad

I'm trying to use the server side functionality of the jQuery Datatables plugin with ASP.Net. The ajax request is returning valid JSON, but nothing is showing up in the table. I originally had problems with the data I was sending in the ajax request. I was getting a "Invalid JSON primative" error. I discovered that the data needs to be in a string instead of JSON serialized, as described in this post: http://encosia.com/2008/06/05/3-mistakes-to-avoid-when-using-jquery-with-aspnet-ajax/. I wasn't quite sure how to fix that, so I tried adding this in the ajax request: "data": "{'sEcho': '" + aoData.sEcho + "'}" If the aboves eventually works I'll add the other parameters later. Right now I'm just trying to get something to show up in my table. The returning JSON looks ok and validates, but the sEcho in the post is undefined, and I think thats why no data is being loaded into the table. So, what am I doing wrong? Am I even on the right track or am I being stupid? Does anyone ran into this before or have any suggestions? Here's my jQuery: $(document).ready(function() { $("#grid").dataTable({ "bJQueryUI": true, "sPaginationType": "full_numbers", "bServerSide":true, "sAjaxSource": "GridTest.asmx/ServerSideTest", "fnServerData": function(sSource, aoData, fnCallback) { $.ajax({ "type": "POST", "dataType": 'json', "contentType": "application/json; charset=utf-8", "url": sSource, "data": "{'sEcho': '" + aoData.sEcho + "'}", "success": fnCallback }); } }); }); HTML: <table id="grid"> <thead> <tr> <th>Last Name</th> <th>First Name</th> <th>UserID</th> </tr> </thead> <tbody> <tr> <td colspan="5" class="dataTables_empty">Loading data from server</td> </tr> </tbody> </table> Webmethod: <WebMethod()> _ Public Function ServerSideTest() As Data Dim list As New List(Of String) list.Add("testing") list.Add("chad") list.Add("testing") Dim container As New List(Of List(Of String)) container.Add(list) list = New List(Of String) list.Add("testing2") list.Add("chad") list.Add("testing") container.Add(list) HttpContext.Current.Response.ContentType = "application/json" Return New Data(HttpContext.Current.Request("sEcho"), 2, 2, container) End Function Public Class Data Private _iTotalRecords As Integer Private _iTotalDisplayRecords As Integer Private _sEcho As Integer Private _sColumns As String Private _aaData As List(Of List(Of String)) Public Property sEcho() As Integer Get Return _sEcho End Get Set(ByVal value As Integer) _sEcho = value End Set End Property Public Property iTotalRecords() As Integer Get Return _iTotalRecords End Get Set(ByVal value As Integer) _iTotalRecords = value End Set End Property Public Property iTotalDisplayRecords() As Integer Get Return _iTotalDisplayRecords End Get Set(ByVal value As Integer) _iTotalDisplayRecords = value End Set End Property Public Property aaData() As List(Of List(Of String)) Get Return _aaData End Get Set(ByVal value As List(Of List(Of String))) _aaData = value End Set End Property Public Sub New(ByVal sEcho As Integer, ByVal iTotalRecords As Integer, ByVal iTotalDisplayRecords As Integer, ByVal aaData As List(Of List(Of String))) If sEcho <> 0 Then Me.sEcho = sEcho Me.iTotalRecords = iTotalRecords Me.iTotalDisplayRecords = iTotalDisplayRecords Me.aaData = aaData End Sub Returned JSON: {"__type":"Data","sEcho":0,"iTotalRecords":2,"iTotalDisplayRecords":2,"aaData":[["testing","chad","testing"],["testing2","chad","testing"]]}

Read the article

.NET Oracle Provider: Why will my stored proc not work?

- by Matt

I am using the Oracle .NET Provider and am calling a stored procedure in a package. The message I get back is "Wrong number or types in call". I have ensured that the order in which the parameters are being added are in the correct order and I have gone over the OracleDbType's thoroughly though I suspect that is where my problem is. Here is the code-behind: //setup intial stuff, connection and command string msg = string.Empty; string oraConnString = ConfigurationManager.ConnectionStrings["OracleServer"].ConnectionString; OracleConnection oraConn = new OracleConnection(oraConnString); OracleCommand oraCmd = new OracleCommand("PK_MOVEMENT.INSERT_REC", oraConn); oraCmd.CommandType = CommandType.StoredProcedure; try { //iterate the array //grab 3 items at a time and do db insert, continue until all items are gone. Will always be divisible by 3. for (int i = 0; i < theData.Length; i += 3) { //3 items hardcoded for now string millCenter = "0010260510"; string movementType = "RECEIPT"; string feedCode = null; string userID = "GRIMMETTM"; string inventoryType = "INGREDIENT"; //set to FINISHED for feed stuff string movementDate = theData[i + 0]; string ingCode = System.Text.RegularExpressions.Regex.Match(theData[i + 1], @"^([0-9]*)").ToString(); string pounds = theData[i + 2].Replace(",", ""); //setup parameters OracleParameter p1 = new OracleParameter("A_MILL_CENTER", OracleDbType.NVarchar2, 10); p1.Direction = ParameterDirection.Input; p1.Value = millCenter; oraCmd.Parameters.Add(p1); OracleParameter p2 = new OracleParameter("A_INGREDIENT_CODE", OracleDbType.NVarchar2, 50); p2.Direction = ParameterDirection.Input; p2.Value = ingCode; oraCmd.Parameters.Add(p2); OracleParameter p3 = new OracleParameter("A_FEED_CODE", OracleDbType.NVarchar2, 30); p3.Direction = ParameterDirection.Input; p3.Value = feedCode; oraCmd.Parameters.Add(p3); OracleParameter p4 = new OracleParameter("A_MOVEMENT_TYPE", OracleDbType.NVarchar2, 10); p4.Direction = ParameterDirection.Input; p4.Value = movementType; oraCmd.Parameters.Add(p4); OracleParameter p5 = new OracleParameter("A_MOVEMENT_DATE", OracleDbType.NVarchar2, 10); p5.Direction = ParameterDirection.Input; p5.Value = movementDate; oraCmd.Parameters.Add(p5); OracleParameter p6 = new OracleParameter("A_MOVEMENT_QTY", OracleDbType.Int64, 12); p6.Direction = ParameterDirection.Input; p6.Value = pounds; oraCmd.Parameters.Add(p6); OracleParameter p7 = new OracleParameter("INVENTORY_TYPE", OracleDbType.NVarchar2, 10); p7.Direction = ParameterDirection.Input; p7.Value = inventoryType; oraCmd.Parameters.Add(p7); OracleParameter p8 = new OracleParameter("A_CREATE_USERID", OracleDbType.NVarchar2, 20); p8.Direction = ParameterDirection.Input; p8.Value = userID; oraCmd.Parameters.Add(p8); OracleParameter p9 = new OracleParameter("A_RETURN_VALUE", OracleDbType.Int32, 10); p9.Direction = ParameterDirection.Output; oraCmd.Parameters.Add(p9); //open and execute oraConn.Open(); oraCmd.ExecuteNonQuery(); oraConn.Close(); } } catch (OracleException oraEx) { msg = "An error has occured in the database: " + oraEx.ToString(); } catch (Exception ex) { msg = "An error has occured: " + ex.ToString(); } finally { //close connection oraConn.Close(); } return msg;

Read the article

WPF ListBox/View Data Binding weird result

- by Aviatrix

I have this problem when i try to synchronize a observable list with listbox/view it displays the first item X times (x total amount of records in the list) but it doesn't change the variable's here is the XAML <ListBox x:Name="PostListView" BorderThickness="0" MinHeight="300" Background="{x:Null}" BorderBrush="{x:Null}" Foreground="{x:Null}" VerticalContentAlignment="Top" ScrollViewer.HorizontalScrollBarVisibility="Disabled" ScrollViewer.VerticalScrollBarVisibility="Disabled" DataContext="{Binding Source={StaticResource PostListData}}" ItemsSource="{Binding Mode=OneWay}" IsSynchronizedWithCurrentItem="True" MinWidth="332" SelectedIndex="0" SelectionMode="Extended" AlternationCount="1"> <ListBox.ItemTemplate> <DataTemplate> <DockPanel x:Name="SinglePost" VerticalAlignment="Top" ScrollViewer.CanContentScroll="True" ClipToBounds="True" Width="333" Height="70" d:LayoutOverrides="VerticalAlignment" d:IsEffectDisabled="True"> <DockPanel.DataContext> <local:PostList/> </DockPanel.DataContext> <StackPanel x:Name="AvatarNickHolder" Width="60"> <Label x:Name="Nick" HorizontalAlignment="Center" Margin="5,0" VerticalAlignment="Top" Height="15" Content="{Binding Path=pUsername, FallbackValue=pUsername}" FontFamily="Arial" FontSize="10.667" Padding="5,0"/> <Image x:Name="Avatar" HorizontalAlignment="Center" Margin="5,0,5,5" VerticalAlignment="Top" Width="50" Height="50" IsHitTestVisible="False" Source="1045443356IMG_0972.jpg" Stretch="UniformToFill"/> </StackPanel> <TextBlock x:Name="userPostText" Margin="0,0,5,0" VerticalAlignment="Center" FontSize="10.667" Text="{Binding Path=pMsg, FallbackValue=pMsg}" TextWrapping="Wrap"/> </DockPanel> </DataTemplate> </ListBox.ItemTemplate> </ListBox> and here is the ovservable list class public class PostList : ObservableCollection<PostData> { public PostList() : base() { Add(new PostData("this is test msg", "Cather", "1045443356IMG_0972.jpg")); Add(new PostData("this is test msg1", "t1", "1045443356IMG_0972.jpg")); Add(new PostData("this is test msg2", "t2", "1045443356IMG_0972.jpg")); Add(new PostData("this is test msg3", "t3", "1045443356IMG_0972.jpg")); Add(new PostData("this is test msg4", "t4", "1045443356IMG_0972.jpg")); Add(new PostData("this is test msg5", "t5", "1045443356IMG_0972.jpg")); // Add(new PostData("Isak", "Dinesen")); // Add(new PostData("Victor", "Hugo")); // Add(new PostData("Jules", "Verne")); } } public class PostData { private string Username; private string Msg; private string Avatar; private string LinkAttached; private string PicAttached; private string VideoAttached; public PostData(string msg ,string username, string avatar=null, string link=null,string pic=null ,string video=null) { this.Username = username; this.Msg = msg; this.Avatar = avatar; this.LinkAttached = link; this.PicAttached = pic; this.VideoAttached = video; } public string pMsg { get { return Msg; } set { Msg = value; } } public string pUsername { get { return Username; } set { Username = value; } } public string pAvatar { get { return Avatar; } set { Avatar = value; } } public string pLink { get { return LinkAttached; } set { LinkAttached = value; } } public string pPic { get { return PicAttached; } set { PicAttached = value; } } public string pVideo { get { return VideoAttached; } set { VideoAttached = value; } } } Any ideas ?

Read the article

How to handle Oracle Stored Proc with ASP.NET and Oracle Data Provider?

- by Matt

I have been struggling with this for quite some time having been accustomed to SQL Server. I have the following code and I have verified that the OracleDbType's are correct and have verified that the actual values being passed to the parameters match. I think my problem may rest with the return value. All it does is give me the row count. I read somewhere that the return parameter must be set at the top. The specific error I am getting says, PLS-00306: wrong number or types of arguments in call to \u0027INSERT_REC\u0027 ORA-06550: line 1, column 7:\nPL/SQL: Statement ignored The stored procedure is: PROCEDURE INSERT_REC ( A_MILL_CENTER IN GRO_OWNER.MOVEMENT.MILL_CENTER%TYPE, --# VARCHAR2(10) A_INGREDIENT_CODE IN GRO_OWNER.MOVEMENT.INGREDIENT_CODE%TYPE, --# VARCHAR2(50) A_FEED_CODE IN GRO_OWNER.MOVEMENT.FEED_CODE%TYPE, --# VARCHAR2(30) --# A_MOVEMENT_TYPE should be ‘RECEIPT’ for ingredient receipts A_MOVEMENT_TYPE IN GRO_OWNER.MOVEMENT.MOVEMENT_TYPE%TYPE, --# VARCHAR2(10) A_MOVEMENT_DATE IN VARCHAR2, --# VARCHAR2(10) A_MOVEMENT_QTY IN GRO_OWNER.MOVEMENT.MOVEMENT_QTY%TYPE, --# NUMBER(12,4) --# A_INVENTORY_TYPE should be ‘INGREDIENT’ or ‘FINISHED’ A_INVENTORY_TYPE IN GRO_OWNER.MOVEMENT.INVENTORY_TYPE%TYPE, --# VARCHAR2(10) A_CREATE_USERID IN GRO_OWNER.MOVEMENT.CREATE_USERID%TYPE, --# VARCHAR2(20) A_RETURN_VALUE OUT NUMBER --# NUMBER(10,0) ); My code is as follows: //3 items hardcoded for now string millCenter = "0010260510"; string movementType = "RECEIPT"; string feedCode = "test this"; string userID = "GRIMMETTM"; string inventoryType = "INGREDIENT"; //set to FINISHED for feed stuff string movementDate = theData[i]; string ingCode = System.Text.RegularExpressions.Regex.Match(theData[i + 1], @"^([0-9]*)").ToString(); //int pounds = Convert.ToInt32(theData[i + 2].Replace(",", "")); int pounds = 100; //setup parameters OracleParameter p9 = new OracleParameter("A_RETURN_VALUE", OracleDbType.Int32, 30); p9.Direction = ParameterDirection.ReturnValue; oraCmd.Parameters.Add(p9); OracleParameter p1 = new OracleParameter("A_MILL_CENTER", OracleDbType.Varchar2, 10); p1.Direction = ParameterDirection.Input; p1.Value = millCenter; oraCmd.Parameters.Add(p1); OracleParameter p2 = new OracleParameter("A_INGREDIENT_CODE", OracleDbType.Varchar2, 50); p2.Direction = ParameterDirection.Input; p2.Value = ingCode; oraCmd.Parameters.Add(p2); OracleParameter p3 = new OracleParameter("A_FEED_CODE", OracleDbType.Varchar2, 30); p3.Direction = ParameterDirection.Input; p3.Value = feedCode; oraCmd.Parameters.Add(p3); OracleParameter p4 = new OracleParameter("A_MOVEMENT_TYPE", OracleDbType.Varchar2, 10); p4.Direction = ParameterDirection.Input; p4.Value = movementType; oraCmd.Parameters.Add(p4); OracleParameter p5 = new OracleParameter("A_MOVEMENT_DATE", OracleDbType.Varchar2, 10); p5.Direction = ParameterDirection.Input; p5.Value = movementDate; oraCmd.Parameters.Add(p5); OracleParameter p6 = new OracleParameter("A_MOVEMENT_QTY", OracleDbType.Int32, 12); p6.Direction = ParameterDirection.Input; p6.Value = pounds; oraCmd.Parameters.Add(p6); OracleParameter p7 = new OracleParameter("A_INVENTORY_TYPE", OracleDbType.Varchar2, 10); p7.Direction = ParameterDirection.Input; p7.Value = inventoryType; oraCmd.Parameters.Add(p7); OracleParameter p8 = new OracleParameter("A_CREATE_USERID", OracleDbType.Varchar2, 20); p8.Direction = ParameterDirection.Input; p8.Value = userID; oraCmd.Parameters.Add(p8); //open and execute oraConn.Open(); oraCmd.ExecuteNonQuery(); oraConn.Close();

Read the article

Binding DataTable To GridView, But No Rows In GridViewRowCollection Despite GridView Population?

- by KSwift87

Problem: I've coded a GridView in the markup in a page. I have coded a DataTable in the code-behind that takes data from a collection of custom objects. I then bind that DataTable to the GridView. (Specific problem mentioned a couple code-snippets below.) GridView Markup: <asp:GridView ID="gvCart" runat="server" CssClass="pList" AutoGenerateColumns="false" DataKeyNames="ProductID"> <Columns> <asp:BoundField DataField="ProductID" HeaderText="ProductID" /> <asp:BoundField DataField="Name" HeaderText="ProductName" /> <asp:ImageField DataImageUrlField="Thumbnail" HeaderText="Thumbnail"></asp:ImageField> <asp:BoundField DataField="Unit Price" HeaderText="Unit Price" /> <asp:TemplateField HeaderText="Quantity"> <ItemTemplate> <asp:TextBox ID="Quantity" runat="server" Text="<%# Bind('Quantity') %>" Width="25px"></asp:TextBox> </ItemTemplate> </asp:TemplateField> <asp:BoundField DataField="Total Price" HeaderText="Total Price" /> </Columns> </asp:GridView> DataTable Code-Behind: private void View(List<OrderItem> cart) { DataSet ds = new DataSet(); DataTable dt = ds.Tables.Add("Cart"); if (cart != null) { dt.Columns.Add("ProductID"); dt.Columns.Add("Name"); dt.Columns.Add("Thumbnail"); dt.Columns.Add("Unit Price"); dt.Columns.Add("Quantity"); dt.Columns.Add("Total Price"); foreach (OrderItem item in cart) { DataRow dr = dt.NewRow(); dr["ProductID"] = item.productId.ToString(); dr["Name"] = item.productName; dr["Thumbnail"] = ResolveUrl(item.productThumbnail); dr["Unit Price"] = "$" + item.productPrice.ToString(); dr["Quantity"] = item.productQuantity.ToString(); dr["Total Price"] = "$" + (item.productPrice * item.productQuantity).ToString(); dt.Rows.Add(dr); } gvCart.DataSource = dt; gvCart.DataBind(); gvCart.Width = 500; for (int counter = 0; counter < gvCart.Rows.Count; counter++) { gvCart.Rows[counter].Cells.Add(Common.createCell("<a href='cart.aspx?action=update&prodId=" + gvCart.Rows[counter].Cells[0].Text + "'>Update</a><br /><a href='cart.aspx?action='action=remove&prodId=" + gvCart.Rows[counter].Cells[0].Text + "/>Remove</a>")); } } } Error occurs below in the foreach - the GridViewRowCollection is empty! private void Update(string prodId) { List<OrderItem> cart = (List<OrderItem>)Session["cart"]; int uQty = 0; foreach (GridViewRow gvr in gvCart.Rows) { if (gvr.RowType == DataControlRowType.DataRow) { if (gvr.Cells[0].Text == prodId) { uQty = int.Parse(((TextBox)gvr.Cells[4].FindControl("Quantity")).Text); } } } Goal: I'm basically trying to find a way to update the data in my GridView (and more importantly my cart Session object) without having to do everything else I've seen online such as utilizing OnRowUpdate, etc. Could someone please tell me why gvCart.Rows is empty and/or how I could accomplish my goal without utilizing OnRowUpdate, etc.? When I execute this code, the GridView gets populated but for some reason I can't access any of its rows in the code-behind.

Read the article

asp.net listbox

- by lodun

Why this code don't work,when i want run this code vwd 2008 express show me this error: Object reference not set to an instance of an object. Line 73: kom.Parameters.Add("@subcategories", SqlDbType.Text).Value = s_categoreis.SelectedItem.ToString(); This is my ascx file: <asp:ListBox ID="categories" runat="server" Height="380px" CssClass="kat" AutoPostBack="true" DataSourceID="SqlDataSource1" DataTextField="Categories" DataValueField="ID" onselectedindexchanged="kategorije_SelectedIndexChanged"></asp:ListBox> <asp:Button ID="Button1" CssClass="my" runat="server" Text="click" onclick="Button1_Click" /> <asp:UpdatePanel ID="UpdatePanel1" runat="server"> <ContentTemplate> <asp:ListBox ID="s_categoreis" CssClass="pod" Height="150px" Enabled="true" runat="server"></asp:ListBox></ContentTemplate> <Triggers> <asp:AsyncPostBackTrigger ControlID="categories" EventName="SelectedIndexChanged" /> </Triggers> </asp:UpdatePanel> <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:estudent_piooConnectionString %>" SelectCommand="SELECT [ID], [Categories] FROM [categories]"> </asp:SqlDataSource> and this is my ascx.cs: SqlConnection veza; SqlCommand kom = new SqlCommand(); SqlParameter par1 = new SqlParameter(); SqlParameter par2 = new SqlParameter(); SqlParameter par3 = new SqlParameter(); SqlParameter par4 = new SqlParameter(); SqlParameter par5 = new SqlParameter(); SqlParameter par6 = new SqlParameter(); SqlParameter par7 = new SqlParameter(); SqlParameter par8 = new SqlParameter(); SqlParameter par9 = new SqlParameter(); protected void Page_Load(object sender, EventArgs e) { Listapod_kategorije(1); } protected void kategorije_SelectedIndexChanged(object sender, EventArgs e) { Listapod_kategorije(Convert.ToInt32(kategorije.SelectedValue)); } private void Listapod_kategorije(int broj) { SqlDataSource ds = new SqlDataSource(); ds.ConnectionString = ConfigurationManager.ConnectionStrings["estudent_piooConnectionString"].ConnectionString; ds.SelectCommand = "Select * from pod_kategorije where kat_id=" + broj; pod_kategorije.DataSource = ds; pod_kategorije.DataTextField = "pkategorija"; pod_kategorije.DataValueField = "ID"; pod_kategorije.DataBind(); } protected void Button1_Click(object sender, EventArgs e) { Guid jk = new Guid(); object datum = DateTime.Now; veza = new SqlConnection(@"server=85.94.76.170\PADME; database=estudent_pioo;uid=pioo;pwd=1234567"); Random broj = new Random(); int b_kor = broj.Next(1, 1000); kom.Parameters.Add("@text", SqlDbType.Text).Value = str; kom.Parameters.Add("@user", SqlDbType.UniqueIdentifier).Value = jk; kom.Parameters.Add("@date", SqlDbType.DateTime).Value = datum; kom.Parameters.Add("@visits", SqlDbType.Int).Value = 0; kom.Parameters.Add("@answers", SqlDbType.Int).Value = 0; kom.Parameters.Add("@username", SqlDbType.Text).Value = "unknown_" + b_kor.ToString(); ; kom.Parameters.Add("@categories", SqlDbType.Text).Value = categories.SelectedItem.ToString(); kom.Parameters.Add("@sub_categories", SqlDbType.Text).Value = s_categoreis.SelectedItem.ToString(); veza.Open(); kom.ExecuteNonQuery(); veza.Close(); Response.Redirect("default.aspx");

Read the article

Table header is not shown

- by Vivien

My error is that the table headers of my two tables are not shown. Right now I am setting the header with new JTable(data, columnNames). Here is an example which shows, my problem: public class Test extends JFrame { private static final long serialVersionUID = -4682396888922360841L; private JMenuBar menuBar; private JMenu mAbout; private JMenu mMain; private JTabbedPane tabbedPane; public SettingsTab settings = new SettingsTab(); private void addMenuBar() { menuBar = new JMenuBar(); mMain = new JMenu("Main"); mAbout = new JMenu("About"); menuBar.add(mMain); menuBar.add(mAbout); setJMenuBar(menuBar); } public void createTabBar() { tabbedPane = new JTabbedPane(JTabbedPane.TOP); tabbedPane.addTab("Settings", settings.createLayout()); add(tabbedPane); tabbedPane.setTabLayoutPolicy(JTabbedPane.SCROLL_TAB_LAYOUT); } private void makeLayout() { setTitle("Test"); setLayout(new BorderLayout()); setPreferredSize(new Dimension(1000, 500)); addMenuBar(); createTabBar(); setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); pack(); setVisible(true); } public void start() { javax.swing.SwingUtilities.invokeLater(new Runnable() { public void run() { makeLayout(); } }); } public static void main(String[] args) { Test gui = new Test(); gui.start(); } public class SettingsTab extends JPanel { public JScrollPane createLayout() { JPanel panel = new JPanel(new MigLayout("")); JScrollPane sp = new JScrollPane(panel); sp.setVerticalScrollBarPolicy(ScrollPaneConstants.VERTICAL_SCROLLBAR_ALWAYS); panel.add(table1(), "growx, wrap"); panel.add(Box.createRigidArea(new Dimension(0,10))); panel.add(table2()); // panel.add(Box.createRigidArea(new Dimension(0,10))); return sp; } public JPanel table1() { JPanel panel1 = new JPanel(); String[] columnNames = {"First Name", "Last Name"}; Object[][] data = { {"Kathy", "Smith"}, {"John", "Doe"}, {"Sue", "Black"}, {"Jane", "White"}, {"Joe", "Brown"}, {"John", "Doe"}, {"Sue", "Black"}, {"Jane", "White"}, {"Joe", "Brown"} }; final JTable table = new JTable(data, columnNames); tableProperties(table); panel1.add(table); panel1.setLayout(new BoxLayout(panel1, BoxLayout.Y_AXIS)); return panel1; } public JPanel table2() { JPanel panel1 = new JPanel(); String[] columnNames = {"First Name", "Last Name"}; Object[][] data = { {"Kathy", "Smith"}, {"John", "Doe"}, {"Sue", "Black"}, {"Jane", "White"}, {"Joe", "Brown"}, {"John", "Doe"}, {"Sue", "Black"}, {"Jane", "White"}, {"Joe", "Brown"} }; final JTable table = new JTable(data, columnNames); table.setPreferredScrollableViewportSize(new Dimension(500, 70)); table.setFillsViewportHeight(true); tableProperties(table); panel1.add(table); panel1.setLayout(new BoxLayout(panel1, BoxLayout.Y_AXIS)); return panel1; } public void tableProperties(JTable table) { table.setAutoResizeMode(JTable.AUTO_RESIZE_ALL_COLUMNS); table.repaint(); table.revalidate(); } } } Any recommendations what I am doing wrong?

Read the article

wxPthon problems with Wrapping StaticText

- by Scott B

Hello. I am having an issue with wxPython. A simplified version of the code is posted below (white space, comments, etc removed to reduce size - but the general format to my program is kept roughly the same). When I run the script, the static text correctly wraps as it should, but the other items in the panel do not move down (they act as if the statictext is only one line and thus not everything is visible). If I manually resize the window/frame, even just a tiny amount, everything gets corrected and displays as it is should. I took screen shots to show this behavior, but I just created this account and thus don't have the required 10 reputation points to be allowed to post pictures. Why does it not display correctly to begin with? I've tried all sorts of combination's of GetParent().Refresh() or Update() and GetTopLevelParent().Update() or Refresh(). I've tried everything I can think of but cannot get it to display correctly without manually resizing the frame/window. Once re-sized, it works exactly as I want it to. Information: Windows XP Python 2.5.2 wxPython 2.8.11.0 (msw-unicode) Any suggestions? Thanks! Code: #! /usr/bin/python import wx class StaticWrapText(wx.PyControl): def __init__(self, parent, id=wx.ID_ANY, label='', pos=wx.DefaultPosition, size=wx.DefaultSize, style=wx.NO_BORDER, validator=wx.DefaultValidator, name='StaticWrapText'): wx.PyControl.__init__(self, parent, id, pos, size, style, validator, name) self.statictext = wx.StaticText(self, wx.ID_ANY, label, style=style) self.wraplabel = label #self.wrap() def wrap(self): self.Freeze() self.statictext.SetLabel(self.wraplabel) self.statictext.Wrap(self.GetSize().width) self.Thaw() def DoGetBestSize(self): self.wrap() #print self.statictext.GetSize() self.SetSize(self.statictext.GetSize()) return self.GetSize() class TestPanel(wx.Panel): def __init__(self, *args, **kwargs): # Init the base class wx.Panel.__init__(self, *args, **kwargs) self.createControls() def createControls(self): # --- Panel2 ------------------------------------------------------------- self.Panel2 = wx.Panel(self, -1) msg1 = 'Below is a List of Files to be Processed' staticBox = wx.StaticBox(self.Panel2, label=msg1) Panel2_box1_v1 = wx.StaticBoxSizer(staticBox, wx.VERTICAL) Panel2_box2_h1 = wx.BoxSizer(wx.HORIZONTAL) Panel2_box3_v1 = wx.BoxSizer(wx.VERTICAL) self.wxL_Inputs = wx.ListBox(self.Panel2, wx.ID_ANY, style=wx.LB_EXTENDED) sz = dict(size=(120,-1)) wxB_AddFile = wx.Button(self.Panel2, label='Add File', **sz) wxB_DeleteFile = wx.Button(self.Panel2, label='Delete Selected', **sz) wxB_ClearFiles = wx.Button(self.Panel2, label='Clear All', **sz) Panel2_box3_v1.Add(wxB_AddFile, 0, wx.TOP, 0) Panel2_box3_v1.Add(wxB_DeleteFile, 0, wx.TOP, 0) Panel2_box3_v1.Add(wxB_ClearFiles, 0, wx.TOP, 0) Panel2_box2_h1.Add(self.wxL_Inputs, 1, wx.ALL|wx.EXPAND, 2) Panel2_box2_h1.Add(Panel2_box3_v1, 0, wx.ALL|wx.EXPAND, 2) msg = 'This is a long line of text used to test the autowrapping ' msg += 'static text message. ' msg += 'This is a long line of text used to test the autowrapping ' msg += 'static text message. ' msg += 'This is a long line of text used to test the autowrapping ' msg += 'static text message. ' msg += 'This is a long line of text used to test the autowrapping ' msg += 'static text message. ' staticMsg = StaticWrapText(self.Panel2, label=msg) Panel2_box1_v1.Add(staticMsg, 0, wx.ALL|wx.EXPAND, 2) Panel2_box1_v1.Add(Panel2_box2_h1, 1, wx.ALL|wx.EXPAND, 0) self.Panel2.SetSizer(Panel2_box1_v1) # --- Combine Everything ------------------------------------------------- final_vbox = wx.BoxSizer(wx.VERTICAL) final_vbox.Add(self.Panel2, 1, wx.ALL|wx.EXPAND, 2) self.SetSizerAndFit(final_vbox) class TestFrame(wx.Frame): def __init__(self, *args, **kwargs): # Init the base class wx.Frame.__init__(self, *args, **kwargs) panel = TestPanel(self) self.SetClientSize(wx.Size(500,500)) self.Center() class wxFileCleanupApp(wx.App): def __init__(self, *args, **kwargs): # Init the base class wx.App.__init__(self, *args, **kwargs) def OnInit(self): # Create the frame, center it, and show it frame = TestFrame(None, title='Test Frame') frame.Show() return True if __name__ == '__main__': app = wxFileCleanupApp() app.MainLoop() EDIT: See my post below for a solution that works!

Search Results

Search found 65196 results on 2608 pages for 'add service reference'.

Page 477/2608 | < Previous Page | 473 474 475 476 477 478 479 480 481 482 483 484 | Next Page >

- by Ray

- by MartinF

- by John Quesie

- by marcamillion

- by Rick Strahl

- by mbcrump

- by Simon Thorpe

- by shiju

- by pjohnson

- by mbridge

- by tranhuyhung

- by Blankman

- by techsjs2012

- by jerryjvl

- by Orion751

- by François Beausoleil

- by Chad

- by Matt

- by Aviatrix

- by Matt

- by KSwift87

- by lodun

- by Vivien

- by Scott B

< Previous Page | 473 474 475 476 477 478 479 480 481 482 483 484 | Next Page >