Search Results

Search found 45833 results on 1834 pages for 'event id'.

Page 477/1834 | < Previous Page | 473 474 475 476 477 478 479 480 481 482 483 484  | Next Page >

  • Exchange 2010 POP3/IMAP4/Transport services complaining that they can't find SSL certificate after blue screen

    - by Graeme Donaldson
    We have a single-server Exchange 2010 setup. In the early hours of this morning the server had a blue screen and rebooted. After coming back up the POP3/IMAP4 and Transport services are complaining that they cannot find the correct SSL certificate for mail.example.com. POP3: Log Name: Application Source: MSExchangePOP3 Date: 2012/04/23 11:45:15 AM Event ID: 2007 Task Category: (1) Level: Error Keywords: Classic User: N/A Computer: exch01.domain.local Description: A certificate for the host name "mail.example.com" couldn't be found. SSL or TLS encryption can't be made to the POP3 service. IMAP4: Log Name: Application Source: MSExchangeIMAP4 Date: 2012/04/23 08:30:44 AM Event ID: 2007 Task Category: (1) Level: Error Keywords: Classic User: N/A Computer: exch01.domain.local Description: A certificate for the host name "mail.example.com" couldn't be found. Neither SSL or TLS encryption can be made to the IMAP service. Transport: Log Name: Application Source: MSExchangeTransport Date: 2012/04/23 08:32:27 AM Event ID: 12014 Task Category: TransportService Level: Error Keywords: Classic User: N/A Computer: exch01.domain.local Description: Microsoft Exchange could not find a certificate that contains the domain name mail.example.com in the personal store on the local computer. Therefore, it is unable to support the STARTTLS SMTP verb for the connector Default EXCH01 with a FQDN parameter of mail.example.com. If the connector's FQDN is not specified, the computer's FQDN is used. Verify the connector configuration and the installed certificates to make sure that there is a certificate with a domain name for that FQDN. If this certificate exists, run Enable-ExchangeCertificate -Services SMTP to make sure that the Microsoft Exchange Transport service has access to the certificate key. The odd part is that Get-ExchangeCertificate show the cert as enabled for all the relevant services, and OWA is working flawlessly using this certificate. [PS] C:\Users\graeme\Desktop>Get-ExchangeCertificate Thumbprint Services Subject ---------- -------- ------- XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX ....S. CN=exch01 YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY ....S. CN=exch01 ZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ IP.WS. CN=mail.example.com, OU=Domain Control Validated, O=mail.exa... Here's the certificate in the computer account's personal cert store: Does anyone have any pointers for getting POP3/IMAP4/SMTP to use the cert again?

    Read the article

  • Recover RAID 5 data after created new array instead of re-using

    - by Brigadieren
    Folks please help - I am a newb with a major headache at hand (perfect storm situation). I have a 3 1tb hdd on my ubuntu 11.04 configured as software raid 5. The data had been copied weekly onto another separate off the computer hard drive until that completely failed and was thrown away. A few days back we had a power outage and after rebooting my box wouldn't mount the raid. In my infinite wisdom I entered mdadm --create -f... command instead of mdadm --assemble and didn't notice the travesty that I had done until after. It started the array degraded and proceeded with building and syncing it which took ~10 hours. After I was back I saw that that the array is successfully up and running but the raid is not I mean the individual drives are partitioned (partition type f8 ) but the md0 device is not. Realizing in horror what I have done I am trying to find some solutions. I just pray that --create didn't overwrite entire content of the hard driver. Could someone PLEASE help me out with this - the data that's on the drive is very important and unique ~10 years of photos, docs, etc. Is it possible that by specifying the participating hard drives in wrong order can make mdadm overwrite them? when I do mdadm --examine --scan I get something like ARRAY /dev/md/0 metadata=1.2 UUID=f1b4084a:720b5712:6d03b9e9:43afe51b name=<hostname>:0 Interestingly enough name used to be 'raid' and not the host hame with :0 appended. Here is the 'sanitized' config entries: DEVICE /dev/sdf1 /dev/sde1 /dev/sdd1 CREATE owner=root group=disk mode=0660 auto=yes HOMEHOST <system> MAILADDR root ARRAY /dev/md0 metadata=1.2 name=tanserv:0 UUID=f1b4084a:720b5712:6d03b9e9:43afe51b Here is the output from mdstat cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid5 sdd1[0] sdf1[3] sde1[1] 1953517568 blocks super 1.2 level 5, 512k chunk, algorithm 2 [3/3] [UUU] unused devices: <none> fdisk shows the following: fdisk -l Disk /dev/sda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000bf62e Device Boot Start End Blocks Id System /dev/sda1 * 1 9443 75846656 83 Linux /dev/sda2 9443 9730 2301953 5 Extended /dev/sda5 9443 9730 2301952 82 Linux swap / Solaris Disk /dev/sdb: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000de8dd Device Boot Start End Blocks Id System /dev/sdb1 1 91201 732572001 8e Linux LVM Disk /dev/sdc: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00056a17 Device Boot Start End Blocks Id System /dev/sdc1 1 60801 488384001 8e Linux LVM Disk /dev/sdd: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000ca948 Device Boot Start End Blocks Id System /dev/sdd1 1 121601 976760001 fd Linux raid autodetect Disk /dev/dm-0: 1250.3 GB, 1250254913536 bytes 255 heads, 63 sectors/track, 152001 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/dm-0 doesn't contain a valid partition table Disk /dev/sde: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x93a66687 Device Boot Start End Blocks Id System /dev/sde1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdf: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xe6edc059 Device Boot Start End Blocks Id System /dev/sdf1 1 121601 976760001 fd Linux raid autodetect Disk /dev/md0: 2000.4 GB, 2000401989632 bytes 2 heads, 4 sectors/track, 488379392 cylinders Units = cylinders of 8 * 512 = 4096 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 524288 bytes / 1048576 bytes Disk identifier: 0x00000000 Disk /dev/md0 doesn't contain a valid partition table Per suggestions I did clean up the superblocks and re-created the array with --assume-clean option but with no luck at all. Is there any tool that will help me to revive at least some of the data? Can someone tell me what and how the mdadm --create does when syncs to destroy the data so I can write a tool to un-do whatever was done? After the re-creating of the raid I run fsck.ext4 /dev/md0 and here is the output root@tanserv:/etc/mdadm# fsck.ext4 /dev/md0 e2fsck 1.41.14 (22-Dec-2010) fsck.ext4: Superblock invalid, trying backup blocks... fsck.ext4: Bad magic number in super-block while trying to open /dev/md0 The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 Per Shanes' suggestion I tried root@tanserv:/home/mushegh# mkfs.ext4 -n /dev/md0 mke2fs 1.41.14 (22-Dec-2010) Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=128 blocks, Stripe width=256 blocks 122101760 inodes, 488379392 blocks 24418969 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=0 14905 block groups 32768 blocks per group, 32768 fragments per group 8192 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968, 102400000, 214990848 and run fsck.ext4 with every backup block but all returned the following: root@tanserv:/home/mushegh# fsck.ext4 -b 214990848 /dev/md0 e2fsck 1.41.14 (22-Dec-2010) fsck.ext4: Invalid argument while trying to open /dev/md0 The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device> Any suggestions? Regards!

    Read the article

  • Run .sh file in linux machine via putty

    - by Prateek
    I want run an .sh file which take an argument in a Linux machine. I'm using plink.exe to execute this .sh file from a windows machine. But I don't know what to write in the batch file in order to run plink.exe which in turn executes the .sh file and this file arguement. I have written following batch command: @echo off start C:\Users\Prateek\Desktop\PLINK.EXE -ssh -P 22 user@host -pw password sh -x "/home/user/copy.sh" On executing it, I get: + echo '' + echo 'Enter partner id' Enter partner id + read pid : Actually 'Enter partner id' is the argument, which I need to pass.

    Read the article

  • Plesk file permissions - Apache/PHP conflicting with user accounts.

    - by hfidgen
    Hiya, I'm building a Drupal site which performs various automatic disk operations using the apache user (id=40). The problem is that the site was set up on a subdomain belonging to user ID 10001 (ie my main FTP account) so the filesystem belongs to that user ID. So I keep getting errors like this: warning: move_uploaded_file() [function.move-uploaded-file]: SAFE MODE Restriction in effect. The script whose uid is 10001 is not allowed to access /var/www/vhosts/domain.com/httpdocs/sites/default/files/images/user owned by uid 48 in /var/www/vhosts/domain.com/httpdocs/includes/file.inc on line 579. I've tried changing the apache group in httpd.conf to apache:psacln, psacln being the default group for all web users but that's not helped. The situation now is: ..../files/images/ = 777 and chown = ftplogin:psacln ..../files/images/user = 775 and chown = apache:psacln ..../files/tmp = 777 and chown = ftplogin:psacln So apparently uid 40 and 10001 both have permissions to write to any of the 3 directories involved, but still can't. Am i missing something here? Can anyone help? Thanks!

    Read the article

  • SharePoint Business Connectivity Services (BCS) Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'

    - by g18c
    I am running SharePoint 2010 with SQL 2012, I am trying to get Business Connectivity Services (BCS) running but I am facing a double-hope authentication issue. Everytime I try to connect to the external BCS list created in SharePoint designer, I get the error Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. In the event viewer on the SQL server I see a login failure for an anonymous user from the SP server IP address. Background information below: I have enabled Kerberos under SharePoint Central admin. I have the following AD domain accounts: SP_Farm - main website pool SP_Services - for SharePoint services (including BCS) SQL_Engine - SQL database engine I then created the following with SetSPN: SetSPN -S http/intranet mydomain\SP_Farm SetSPN -S http/intranet.mydomain.local mydomain\SP_Farm SetSPN -S SPSvc/SPS mydomain\SP_Farm SetSPN -S MSSQLSvc/SQL1 mydomain\SQL_DatabaseEngine SetSPN -S MSSQLSvc/SQL1.mydomain.local mydomain\SQL_DatabaseEngine SetSPN -S MSSQLSvc/SQL1:1433 mydomain\SQL_DatabaseEngine SetSPN -S MSSQLSvc/SQL1.mydomain.local:1433 mydomain\SQL_DatabaseEngine I then delegated the AD accounts for any authentication protocol to the following: SP_Farm - SP_Farm (http service type, intranet) SP_Farm - SQL_DatabaseEngine (MSSQLSvc, sql1) SP_Service - SP_Service (SPSvc) SP_Service - SQL_DatabaseEngine (MSSQLSvc, sql1) I have also checked the WFE is being logged on to with Kerberos, with the WFE server event log showing event ID 4624 with Kerberos authentication, this is OK. The SQL is also showing connections authenticated as Kerberos from the WFE with the following query: Select s.session_id, s.login_name, s.host_name, c.auth_scheme from sys.dm_exec_connections c inner join sys.dm_exec_sessions s on c.session_id = s.session_id Despite the above, credentials are not passed from the client through the SharePoint server to the SQL server, only the anonymous account is used. I get the following error in the WFE server for 'BusinessData' ID 8080: Could not open connection using 'data source=sql1.mydomain.local;initial catalog=MSCRM;integrated security=SSPI;pooling=true;persist security info=false' in App Domain '/LM/W3SVC/1848937658/ROOT-1-129922939694071446'. The full exception text is: Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. If I set a username and password with the Secure Store Service and set the external list to use the impersonated credentials, the list works. Any ideas what I have missed and what can be tried next?

    Read the article

  • Windows errors, how do I find root cause and fix it? Getting several errors

    - by Eric Martin
    My server is having issues and not responding to customer's https requests. I checked the event viewer and found several errors. These two are listed a couple of times: WINS encountered a database error. This may or may not be a serious error. WINS will try to recover from it. You can check the database error events under 'Application Log' category of the Event Viewer for the Exchange Component, ESENT, source to find out more details about database errors. If you continue to see a large number of these errors consistently over time (a span of few hours), you may want to restore the WINS database from a backup. The error number is in the second DWORD of the data section. And this one: An error occured while using SSL configuration for socket address 0.0.0.0:444. The error status code is contained within the returned data. SQL Server is not ready to accept new client connections. Wait a few minutes before trying again. If you have access to the error log, look for the informational message that indicates that SQL Server is ready before trying to connect again. [CLIENT: xxx.xxx.xxxx.xxx] I also found this in the event viewer but the computer has been restarted since this message and I have not seen it again. Configuring the Page file for crash dump failed. Make sure there is a page file on the boot partition and that is large enough to contain all physical memory. This is my virtual memory settings: I'm not familiar with WINS so I wasn't sure if that is where I start or how to resolve it. Is the WINS error causing the other problems or should I be looking somewhere else?

    Read the article

  • Applescript to connect to bluetooth device

    - by Mark117
    I'm trying to create an applescript to allow me to connect to a bluetooth device by it's Bluetooth ID. So far, i've managed to get an applescript to turn on bluetooth if it's off. Here's the code: # This is only necessary, if AppleScripts are not yet allowed to change checkboxes tell application "System Events" to set UI elements enabled to true # Now change the bluetooth status tell application "System Preferences" set current pane to pane id "com.apple.preferences.bluetooth" tell application "System Events" tell process "System Preferences" # Enabled is checkbox number 2 if value of checkbox 2 of window "Bluetooth" is 0 then click checkbox 2 of window "Bluetooth" end if end tell end tell quit end tell Would someone know if and how it's possible to set up a new bluetooth device and if it'd be posible to connect to a device based on it's device name/ it's device bluetooth ID? I've also tried to record the action in Automator but for the "set up new device" option, Automator just tells me: "click on "" button". Thanks

    Read the article

  • How do I connect a 2008 server to a 2003 server active directory?

    - by Matt
    Our DC is running Windows Server 2003. I've just set up Windows Server 2008 and have terminal server running on it. When setting the terminal server permissions, it was able to allow a group name that was read from the domain. In the DC the new terminal server shows up as a computer in the domain. I can also log in as a user within the domain even though that user doesn't exist locally on the new server. However, when I go to set sharing permissions on the new machine it doesn't show my domain as a location. Instead it is only looking at location "machinename" and not allowing domain to be seen or added. Is there something I'm missing? Ok, lots of errors in the event log. We have this: The winlogon notification subscriber is taking long time to handle the notification event (Logon). Followed by this: The winlogon notification subscriber took 121 second(s) to handle the notification event (Logon). Followed by: The processing of Group Policy failed because of lack of network connectivity to a domain controller. This may be a transient condition. A success message would be generated once the machine gets connected to the domain controller and Group Policy has succesfully processed. If you do not see a success message for several hours, then contact your administrator. I think this might be the same problem I'm having http://serverfault.com/questions/24420/primary-domain-controller-slow Solved. The issue was that I had changed from DHCP to static and put the wrong DNS server IP in. i.e. firewall instead of DC/DNS server.

    Read the article

  • SharePoint Records Center Submitted E-mail Records not picked up

    - by Kenneth Verburg
    We have set up a new SharePoint 2007 site with a Records Repository. We're using Exchange 2007 Managed Folders to route e-mails to this repository based on the 'label' attached to the e-mail as set in the Exchange 2007 journaling options. E-mails added to a Managed Folder get sent to SharePoint, they end up in the "Submitted E-mail Records" list of the Records Repository. That's according to plan, but the e-mails are not routed to the respective document library as defined by the label. Instead an error appears in the event viewer for every e-mail listed in the Submitted E-mail Records list, on every interval of the records repository schedule (set to every two minutes for testing purposes): Value cannot be null, parameter name: g. Sending a document from the SharePoint site iself to the Records Repository via the Send To... link works fine, but e-mails get stuck in the list... We have set Document Libraries in the Respository with and without content types (with matching names with the Label and the Record Routing rule set). Any ideas what could be wrong? This is in the event log: Every two minutes the following error appears in the Application Log: Source: Office SharePoint Server Category: Records Center Type: Error Event ID: 4975 User: N/A Computer: SPS2007 Description: Value cannot be null. Parameter name: g For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

    Read the article

  • Why does notepad crash on desktop files in the save-as dialog?

    - by deepc
    Here's a puzzling problem - maybe somebody has an idea. Right now I am out of ideas. On Win7 64bit, the following crashes Notepad: On Desktop, right click, select "New | Text Document". This creates "New Text Document.txt". Right click on that file, select "Edit". This opens notepad with the empty file. Select "File | Save as": Notepad crashes and Win7 reports that "Notepad has stopped working". Now, move the file to c:\temp and repeat steps 2 and 3: no crash this time and the save-as dialog appears normally. I can create similar steps for the "open" dialog. Things I have tried: Safe mode - does not work, same problem Create a new user and try again logged in as that user - no crash Name file differently, or create elsewhere and then move to desktop - same problem Use Wordpad instead - same problem Review shell extensions with ShellExView - nothing extraordinary here Stare at the event log entries for each of the crashes. Does not enlighten me. At time of crash look at the process explorer stack view. Hangs at a function "TaskDialog". sfc.exe /scannow repaired some files but the problem persists. This is how the event log entries look like: Log Name: Application Source: Application Error Date: 14.12.2010 00:33:48 Event ID: 1000 Task Category: (100) Level: Error Keywords: Classic User: N/A Description: Faulting application name: NOTEPAD.EXE, version: 6.1.7600.16385, time stamp: 0x4a5bc9b3 Faulting module name: COMCTL32.dll, version: 6.10.7600.16661, time stamp: 0x4c6f6e4b Exception code: 0xc000041d Fault offset: 0x00000000000db770 Faulting process id: 0x198 Faulting application start time: 0x01cb9b1e140ab92a Faulting application path: C:\Windows\system32\NOTEPAD.EXE Faulting module path: C:\Windows\WinSxS\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7600.16661_none_fa62ad231704eab7\COMCTL32.dll What else should I try, short of dumping my user and starting over with a new profile? Thanks...

    Read the article

  • Windows 8 Doesn't Shutdown Properly With Fast Start-Up Enabled

    - by Patrick
    While Fast start-up is enabled, on turning the computer off (shutdown) the computer idles for about 5min after logging out/screen turning off. It then turns off. On returning into Windows I receive the error message saying Windows didn't shut down properly. Hibernate works fine, and I am told this shouldn't be the case - If one doesn't work, neither should. It works when both Fast start-up is enabled and disabled, as does restart and sleep. Windows is installed under UEFI. The UEFI ultra fast boot option for my motherboard cannot be enabled as my GPU doesn't support some UEFI GOP tech. As far as I know, not related to windows fast start-up, but thought it was worth mentioning. To clarify, if this: http://www.eightforums.com/tutorials/6320-fast-startup-turn-off-windows-8-a.html is enabled, the computer does not shut down properly. EDIT: Some more information on the matter: Formatting didn't fix the issue. Still fails regardless of drivers installed. Hardware was purchased ~6months ago. Running a good SSD. Event viewer Always these two messages in close succession: Error (event ID 6008): The previous system shutdown at 7:45:21 PM on ?27/?10/?2012 was unexpected. Critical (kernel power, event ID 41): The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly. Upon installing WPT as suggested below to figure out what was happening during shutdown, and running the cmd xbootmgr -trace shutdown -noPrepReboot -traceFlags BASE+CSWITCH+DRIVERS+POWER -resultPath C:\TEMP Windows fast start-up is now working consistently. Still works upon uninstalling WPT. This is the only change to occur on the computer. Nothing else has bee installed/uninstalled, no Windows Updates, nothing. Windows fast start-up did not work prior to installing WPT and running the cmd (made sure I tested).

    Read the article

  • sshd running but no PID file

    - by dunxd
    I'm recently started using monit to monitor the status of sshd on my CentOS 5.4 server. This works fine, but every so often monit reports that sshd is no longer running. This isn't true - I am still able to login to the server via ssh, however I note the following: There is no longer any PID file at /var/run/sshd.pid - after a reboot this file exists. Once it is gone, restarting sshd via service sshd restart does not create the PID file. sudo service sshd status reports openssh-daemon is stopped - again, restarting sshd does not change this, but a reboot does. sudo service sshd stop reports failed, presumably because of the missing PID file. Any idea what is going on? Update sudo netstat -lptun gives the following output relating to port 22 tcp 0 0 :::22 :::* LISTEN 20735/sshd Killing the process with this PID as suggested by @Henry and then starting sshd via service results in service sshd status recognising the process by PID again. Would still like to understand this better. RPM verify suggested by a couple of answerers shows this: sudo rpm -vV openssh openssh-server openssh-clients | grep 'S\.5' S.5....T c /etc/pam.d/sshd S.5....T c /etc/ssh/sshd_config /etc/pam.d/sshd has the following contents: #%PAM-1.0 auth include system-auth account required pam_nologin.so account include system-auth password include system-auth session optional pam_keyinit.so force revoke session include system-auth #session required pam_loginuid.so Should that last line be commented out? Update Here's the output of @YannickGirouard 's script: $ sudo ./sshd_test Searching for the process listening on port 22... Found the following PID: 21330 Command line for PID 21330: /usr/sbin/sshd Listing process(es) relating to PID 21330: UID PID PPID C STIME TTY TIME CMD root 21330 1 0 14:04 ? 00:00:00 /usr/sbin/sshd Listing RPM information about openssh packages: Name : openssh Relocations: (not relocatable) Version : 4.3p2 Vendor: CentOS Release : 72.el5_7.5 Build Date: Tue 30 Aug 2011 12:34:14 AM BST Install Date: Sun 06 Nov 2011 12:50:57 AM GMT Build Host: builder10.centos.org Group : Applications/Internet Source RPM: openssh-4.3p2-72.el5_7.5.src.rpm Size : 745390 License: BSD Signature : DSA/SHA1, Fri 02 Sep 2011 01:13:01 AM BST, Key ID a8a447dce8562897 URL : http://www.openssh.com/portable.html Summary : The OpenSSH implementation of SSH protocol versions 1 and 2 ------------------------------------------------------ Name : openssh-clients Relocations: (not relocatable) Version : 4.3p2 Vendor: CentOS Release : 72.el5_7.5 Build Date: Tue 30 Aug 2011 12:34:14 AM BST Install Date: Sun 06 Nov 2011 12:51:04 AM GMT Build Host: builder10.centos.org Group : Applications/Internet Source RPM: openssh-4.3p2-72.el5_7.5.src.rpm Size : 871132 License: BSD Signature : DSA/SHA1, Fri 02 Sep 2011 01:13:01 AM BST, Key ID a8a447dce8562897 URL : http://www.openssh.com/portable.html Summary : The OpenSSH client applications ------------------------------------------------------ Name : openssh-server Relocations: (not relocatable) Version : 4.3p2 Vendor: CentOS Release : 72.el5_7.5 Build Date: Tue 30 Aug 2011 12:34:14 AM BST Install Date: Sun 06 Nov 2011 12:51:04 AM GMT Build Host: builder10.centos.org Group : System Environment/Daemons Source RPM: openssh-4.3p2-72.el5_7.5.src.rpm Size : 492478 License: BSD Signature : DSA/SHA1, Fri 02 Sep 2011 01:13:01 AM BST, Key ID a8a447dce8562897 URL : http://www.openssh.com/portable.html Summary : The OpenSSH server daemon ------------------------------------------------------ However, I've since got things working by killing the process and starting afresh, as suggested by @Henry below, so perhaps I am no longer seeing the same thing. Will try again if I am seeing the issue again after next reboot. Update - 14 March Monit alerted me that sshd had disappeared, and again I am able to ssh onto the server. So now I can run the script $ sudo ./sshd_test Searching for the process listening on port 22... Found the following PID: 2208 Command line for PID 2208: /usr/sbin/sshd Listing process(es) relating to PID 2208: UID PID PPID C STIME TTY TIME CMD root 2208 1 0 Mar13 ? 00:00:00 /usr/sbin/sshd root 1885 2208 0 21:50 ? 00:00:00 sshd: dunx [priv] Listing RPM information about openssh packages: Name : openssh Relocations: (not relocatable) Version : 4.3p2 Vendor: CentOS Release : 72.el5_7.5 Build Date: Tue 30 Aug 2011 12:34:14 AM BST Install Date: Sun 06 Nov 2011 12:50:57 AM GMT Build Host: builder10.centos.org Group : Applications/Internet Source RPM: openssh-4.3p2-72.el5_7.5.src.rpm Size : 745390 License: BSD Signature : DSA/SHA1, Fri 02 Sep 2011 01:13:01 AM BST, Key ID a8a447dce8562897 URL : http://www.openssh.com/portable.html Summary : The OpenSSH implementation of SSH protocol versions 1 and 2 ------------------------------------------------------ Name : openssh-clients Relocations: (not relocatable) Version : 4.3p2 Vendor: CentOS Release : 72.el5_7.5 Build Date: Tue 30 Aug 2011 12:34:14 AM BST Install Date: Sun 06 Nov 2011 12:51:04 AM GMT Build Host: builder10.centos.org Group : Applications/Internet Source RPM: openssh-4.3p2-72.el5_7.5.src.rpm Size : 871132 License: BSD Signature : DSA/SHA1, Fri 02 Sep 2011 01:13:01 AM BST, Key ID a8a447dce8562897 URL : http://www.openssh.com/portable.html Summary : The OpenSSH client applications ------------------------------------------------------ Name : openssh-server Relocations: (not relocatable) Version : 4.3p2 Vendor: CentOS Release : 72.el5_7.5 Build Date: Tue 30 Aug 2011 12:34:14 AM BST Install Date: Sun 06 Nov 2011 12:51:04 AM GMT Build Host: builder10.centos.org Group : System Environment/Daemons Source RPM: openssh-4.3p2-72.el5_7.5.src.rpm Size : 492478 License: BSD Signature : DSA/SHA1, Fri 02 Sep 2011 01:13:01 AM BST, Key ID a8a447dce8562897 URL : http://www.openssh.com/portable.html Summary : The OpenSSH server daemon ------------------------------------------------------ Again, when I look for /var/run/sshd.pid I don't find it. $ cat /var/run/sshd.pid cat: /var/run/sshd.pid: No such file or directory $ sudo netstat -anp | grep sshd tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 2208/sshd $ sudo kill 2208 $ sudo service sshd start Starting sshd: [ OK ] $ cat /var/run/sshd.pid 3794 $ sudo service sshd status openssh-daemon (pid 3794) is running... Is it possible that sshd is restarting and not creating a pidfile for some reason?

    Read the article

  • Website crawler/spider to get site map

    - by ack__
    I need to retrieve a whole website map, in a format like : http://example.org/ http://example.org/product/ http://example.org/service/ http://example.org/about/ http://example.org/product/viewproduct/ I need it to be linked-based (no file or dir brute-force), like : parse homepage - retrieve all links - explore them - retrieve links, ... And I also need the ability to detect if a page is a "template" to not retrieve all of the "child-pages". For example if the following links are found : http://example.org/product/viewproduct?id=1 http://example.org/product/viewproduct?id=2 http://example.org/product/viewproduct?id=3 I need to get only once the http://example.org/product/viewproduct I've looked into HTTtracks, wget (with spider-option), but nothing conclusive so far. The soft/tool should be downloadable, and I prefer if it runs on Linux. It can be written in any language. Thanks

    Read the article

  • Strange email coming from/to my computer

    - by Micah
    I'm running smtp4dev on my machine to trap anything going in/out of my computer on port 25 for testing purposes. Every so often this email gets trapped and I have no idea what it's from. I have Microsoft Security Essentials running on my machine and it hasn't identified and viruses or anything so I'm not sure what's going on. Here's the content of the message: Received: from [125.180.72.4] by 173.162.7.130 SMTP id O2Ncv62Ghig1vR for <[email protected]>; Fri, 24 Jun 2011 20:36:15 +0200 Received: from [125.180.72.4] by 173.162.7.130 SMTP id O2Ncv62Ghig1vR for <[email protected]>; Fri, 24 Jun 2011 20:36:15 +0200 Message-ID: <[email protected]> From: "" <[email protected]> To: <[email protected]> Subject: BC_173.162.7.130 Date: Fri, 24 Jun 11 20:36:15 GMT MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_000D_01C2CC60.49F4EC70"

    Read the article

  • Return cell reference as result of if statement with vlookups.

    - by EMJ
    I have two sets of data in excel. One contains a set of data which represents the initial step of a process. The other set of data represents the additional steps which take place after the first step is completed. Each of the data records in the "additional step data" has an id in a column. I need to find the identifying codes of the "additional step data" which correspond with the initial step data records. The problem is that I have to match the data in 4 columns between the two data sets and return the id of the "additional step data". I started by doing a combination of an if and vlookup functions, but I got stuck when I tried to figure out how to get the if statement to reference the id of the matching "additional step data". Basically I am trying to avoid having to search by manually filtering between two sets of data and finding corresponding records. Does anyone have any idea about how to do this?

    Read the article

  • Dell 2970 - HP 1/8 G2 autoloader keeps falling off LSI 2032 SCSI chain

    - by middaparka
    I've a somewhat irritating problem with a Dell 2970 that has a HP 1/8 G2 autoloader (the Ultrium LTO 2 model) attached to the Dell/LSI 2032 non-RAID SCSI card. In essence, sometimes the autoloader/drive completely fails to appear on the SCSI chain (i.e.: there's neither a media changer or tape drive present within the device manager) and sometimes it appears but then subsequently disappears at a seemingly random (yet always inconvenient) time, resulting in backup failures. On most occasions, there are simply no errors logged in the system event log, but I did manage to capture a series of LSI_SCSI event ID 11 ("The driver detected a controller error on \Device\RaidPort0") errors followed by an event ID 129, ("Reset to device, \Device\RaidPort0, was issued") error during testing. I've tried two different cables, both with the same effect – sometimes the autoloader appears (for a while), sometimes it's completely absent. There's only one terminator I've tried to use, but as I've since successfully tested the autoloader on multiple occasions (albeit via a Adaptec U160 card on a different machine), my gut feel is that the issue doesn't lie with the terminator, or indeed the autoloader itself. As such, I'm just wondering if anyone has any ideas? It's most likely not relevant, but this is all under Windows SBS 2008, running Backup Exec 12.5 SBS edition (the Dell version), both fully patched. Addidtionally, the autoloader is running the latest firmware. It's been a while since I've dealt with anything SCSI, so all suggestions will be gratefully, gratefully received.

    Read the article

  • Is there a SIP provider in the UK which provides the P-Asserted-Identity header?

    - by nbolton
    In the US, Flowroute (low cost SIP trunking provider) provides P-Asserted-Identity in the SIP invite request header (example screenshots). It also allows you to set the caller ID for outgoing calls, for example by using the follow in extensions.conf for Asterisk: exten => id,n,Set(CALLERID(all)=123) However, in the UK, I've tried a couple of SIP providers and none of them let me do either of those things (see P-Asserted-Identity or set the caller-ID). Is this because of some sort of restriction in the UK phone networks, or is it only available to really expensive SIP trunking providers?

    Read the article

  • Refering to another field in a form and return entries based on the filed

    - by Claus Machholdt
    Structure of DB is: Org_Year(Table) ID Org_Name_ID Org_Year Ft(Table) ID Org_Year_ID Count Org_Name(Table) ID Org_Name I've created a form to input data into Ft. Form has reference to Org_name. I should be able to choose between different org first. Afterwards i want to choose which year to enter data into Ft for. I only want to be presented with a list of Years according to the entries in the Org_Year table, where org matches my selection in the dropdown above. The query to populate the select box (Org_year_Box) is: SELECT Org_Year FROM Org_Year WHERE Org_Name_ID=Organisation_Name_ID.value; I't doesn't return the Years for the given Org_id when using the above query. But if i replace "Organisation_Name_ID.value" with the actual value ie. "2" it returns the correct years. How to do?

    Read the article

  • Disk names in Solaris 10 for ZFS: SAS WWN instead of c0t0d0

    - by notpeter
    I currently have a server running Solaris 10u9 with a SAS enclosure (Dell PowerVault MD1000) filled with SATA disks attached to an SAS card (LSI 3801E). It happily recognizes the 15 disks in the MD1000 and presents them each disk in the traditional solaris form (c1t12d0, c1t13d0, c1t15d0, etc). My home ZFS setup (Nexenta CP3 + LSI 9200-16E + directly cabled SATA disks) presents disks as their SAS WWN ID (ex: c3t600039300001EA56d0). Although this ID is longer, I've found it much easier to troubleshoot because the cabling/slot is irrelevant, ZFS just identifies the disk by ID, if it's connected it finds it. Most manufacturers print the WWN right on the disk's top label, can't get much easier than that. So how can I get Solaris to identify disks by SAS WWN instead of by the cXtXdX?

    Read the article

  • Linux USB/Serial port won't create a tty device in /dev

    - by Dave
    I am connecting a USB to serial driver port to my system and I get about halfway to where I need to go. When it is plugged in dmesg indicates: <6>usb 2-1: new full speed USB device using sl811-hcd and address 4 <6>usb 2-1: configuration #1 chosen from 1 choice and lsusb Bus 2 Device 4: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port Bus 2 Device 1: ID 0000:0000 Bus 1 Device 1: ID 0000:0000 I get a series of usbdev2.4 (usbdev2.4, usbdev2.4_ep00, etc) devices in dev but no ttyUSB0 or anything that I can open with minicom. How do I get the system to create the /dev device? Thanks Dave

    Read the article

  • SPF record doesn't work (not sure which DNS server to tweak)

    - by Ion
    Problem: Google (and perhaps others) marks our emails as SPF neutral. Let me give you some background about the setup: initially got a dedicated server (Hetzner) with Plesk installed to host a domain/web application, let's say: bigjaws.com. Plesk automatically creates a DNS zone for it with some records for the various services it provides out of the box, e.g. webmail.bigjaws.com as a CNAME to bigjaws.com to provide Horde/whatever, etc. Let me point out four relevant of these records (where XXX.XXX.XXX.158 is our dedicated IP): bigjaws.com. A XXX.XXX.XXX.158 mail.bigjaws.com. A XXX.XXX.XXX.158 bigjaws.com MX (10) mail.bigjaws.com. bigjaws.com. TXT v=spf1 +a +mx -all The above records are not(?) valid anymore though, because after using this dedicated server for a while, our site got bigger and bigger so we decided to move our operations over to AWS (EC2, RDS, ELB, etc), but we retained the mail functionality as is, i.e. emails from [email protected] are sent by connecting to our dedicated server where Plesk takes care of things. This was decided in order not to setup anything from scratch. Of course for all DNS-related things we now use Route53. In Route53 I have the following records: mail.schoox.com. A XXX.XXX.XXX.158 bigjaws.com. MX (10) mail.bigjaws.com bigjaws.com. SPF "v=spf1 +ip4:XXX.XXX.XXX.158 +mx ~all" From my understanding of SPF, the SPF status should have been passed: I designate that all email being sent by bigjaws.com from XXX.XXX.XXX.158 are valid/not spam (I added +mx there but I'm not sure if needed). When a mail server receives an email, doesn't it lookup the SPF record of the domain and checks against the IP it got the email from? Checking with spfquery: root@box:~# spfquery -ip XXX.XXX.XXX.158 -sender [email protected] -rcpt-to [email protected] StartError Context: Failed to query MAIL-FROM ErrorCode: (2) Could not find a valid SPF record Error: No DNS data for 'bigjaws.com'. EndError noneneutral Please see http://www.openspf.org/Why?id=employee1%40bigjaws.com&ip=XXX.XXX.XXX.158&receiver=spfquery : Reason: default spfquery: XXX.XXX.XXX.158 is neither permitted nor denied by domain of bigjaws.com Received-SPF: neutral (spfquery: XXX.XXX.XXX.158 is neither permitted nor denied by domain of bigjaws.com) client-ip=XXX.XXX.XXX.158; [email protected]; If I go to the address listed above (openspf.org) it tells me that the message should have been accepted(!): spfquery rejected a message that claimed an envelope sender address of [email protected]. spfquery received a message from static.158.XXX.XXX.XXX.clients.your-server.de (XXX.XXX.XXX.158) that claimed an envelope sender address of [email protected]. The domain bigjaws.com has authorized static.158.XXX.XXX.XXX.clients.your-server.de (XXX.XXX.XXX.158) to send mail on its behalf, so the message should have been accepted. It is impossible for us to say why it was rejected. What should I do? If the problem persists, contact the bigjaws.com postmaster. Also, here are some headers from an email sent by one of our [email protected] addresses to a gmail.com address (by the way, bigjaws.de listed in the "Received: from" field was the initial domain hosted on the dedicated server before adding the .com one -- both are still listed as separate subscriptions under Plesk). Delivered-To: [email protected] Received: by 10.14.177.70 with SMTP id c46csp289656eem; Wed, 23 Oct 2013 01:11:00 -0700 (PDT) X-Received: by 10.14.102.66 with SMTP id c42mr306186eeg.47.1382515860386; Wed, 23 Oct 2013 01:11:00 -0700 (PDT) Return-Path: <[email protected]> Received: from bigjaws.de (static.158.XXX.XXX.XXX.clients.your-server.de. [XXX.XXX.XXX.158]) by mx.google.com with ESMTPS id l4si19438578eew.161.2013.10.23.01.10.59 for <[email protected]> (version=TLSv1 cipher=RC4-SHA bits=128/128); Wed, 23 Oct 2013 01:10:59 -0700 (PDT) Received-SPF: neutral (google.com: XXX.XXX.XXX.158 is neither permitted nor denied by best guess record for domain of [email protected]) client-ip=XXX.XXX.XXX.158; Authentication-Results: mx.google.com; spf=neutral (google.com: XXX.XXX.XXX.158 is neither permitted nor denied by best guess record for domain of [email protected]) [email protected] DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=default; d=bigjaws.com; b=WwRAS0WKjp9lO17iMluYPXOHzqRcOueiQT4rPdvy3WFf0QzoXiy6rLfxU/Ra53jL1vlPbwlLNa5gjoJBi7ZwKfUcvs3s02hJI7b3ozl0fEgJtTPKoCfnwl4bLPbtXNFu; h=Received:Received:Message-ID:Date:From:User-Agent:MIME-Version:To:Subject:Content-Type:Content-Transfer-Encoding; Received: (qmail 22722 invoked from network); 23 Oct 2013 10:10:59 +0200 Received: from hostname.static.ISP.com (HELO ?192.168.1.60?) (YYY.YYY.ISP.IP) by static.158.XXX.XXX.XXX.clients.your-server.de. with ESMTPSA (DHE-RSA-AES256-SHA encrypted, authenticated); 23 Oct 2013 10:10:59 +0200 Message-ID: <[email protected]> Date: Wed, 23 Oct 2013 11:11:00 +0300 From: BigJaws Employee <[email protected]> User-Agent: Mozilla/5.0 (Windows NT 6.2; WOW64; rv:24.0) Gecko/20100101 Thunderbird/24.0.1 MIME-Version: 1.0 To: [email protected] Subject: test SPF Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit test SPF Any ideas why SPF is not working correctly? Also, are there any DNS settings that are not needed anymore and create a problem?

    Read the article

  • Getting 0xc00000e windows 7 "Boot device inaccessible" after random crashes

    - by Dynde
    I've been having some weird random crashes that I can't seem to locate, and I'm unsure if it's windows or hardware related. It's a brand new computer and very powerful. I've run into a couple of these random crashes, now I don't know what causes them, as it happens during the night, when I'm sleeping. When I wake up, all I see is a boot manager screen that says Exception: 0xc00000e "Boot device inaccessible". A simple restart doesn't fix the problem - it seems to struggle locating my primary hdd - but a complete shutdown works, it'll just fly straight into windows again. The event viewer doesn't tell me much. The most reason incident just gives me this: "The previous system shutdown at 08:55:44 on ?11-?12-?2011 was unexpected." And also a kernel power event: The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly. and I can see only two application event entries around that time at 8.47 (about 8 minutes prior to the crash): The Windows Modules Installer service entered the running state. The WinHTTP Web Proxy Auto-Discovery Service service entered the running state. Can anyone tell me anything about this, or direct me to a forum or something that might know what's wrong? I can supply the extra details of the events too if needed. The hdd is an SSD - could that have anything to do with it? I ran a few diagnostics and memory and hdd should be okay - at least the diagnostics report is clean. Is it a faulty drive?

    Read the article

  • Determine process using a port, without sudo

    - by pat
    I'd like to find out which process (in particular, the process id) is using a given port. The one catch is, I don't want to use sudo, nor am I logged in as root. The processes I want this to work for are run by the same user that I want to find the process id - so I would have thought this was simple. Both lsof and netstat won't tell me the process id unless I run them using sudo - they will tell me that the port is being used though. As some extra context - I have various apps all connecting via SSH to a server I manage, and creating reverse port forwards. Once those are set up, my server does some processing using the forwarded port, and then the connection can be killed. If I can map specific ports (each app has their own) to processes, this is a simple script. Any suggestions? This is on an Ubuntu box, by the way - but I'm guessing any solution will be standard across most Linux distros.

    Read the article

  • Nginx rewrite rules, some work, some don't

    - by Lawrence Goldstien
    Here are the two rewrite rules: This one works rewrite ^/knowledgebase/([0-9]+)/[a-z0-9_-]+.html$ /./knowledgebase.php?action=displayarticle&id=$1 last; This one doesn't rewrite ^/announcements/([0-9]+)/[a-z0-9_-]+.html$ /./announcements.php?id=$1 last; There is no difference between the two as far as I can see. The url to be rewritten for announcements is: /announcements/2/New-Site-Design.html And should be rewritten to: /announcements.php?id=2 I really can't see how the announcements one doesn't work compared to the knowledgebase one. Any tips would be greatly appreciated.

    Read the article

  • OpenVPN - client-to-client traffic working in one direction but not the other

    - by Pawz
    I have the following VPN configuration: +------------+ +------------+ +------------+ | outpost |----------------| kino |----------------| guchuko | +------------+ +------------+ +------------+ OS: FreeBSD 6.2 OS: Gentoo 2.6.32 OS: Gentoo 2.6.33.3 Keyname: client3 Keyname: server Keyname: client1 eth0: 10.0.1.254 eth0: 203.x.x.x eth0: 192.168.0.6 tun0: 192.168.150.18 tun0: 192.168.150.1 tun0: 192.168.150.10 P-t-P: 192.166.150.17 P-t-P: 192.168.150.2 P-t-P: 192.168.150.9 Kino is the server and has client-to-client enabled. I am using "fragment 1400" and "mssfix" on all three machines. An mtu-test on both connections is successful. All three machines have ip forwarding enabled, by this on the gentoo boxes: net.ipv4.conf.all.forwarding = 1 And this on the FreeBSD box: net.inet.ip.forwarding: 1 In the server's "ccd" directory is the following files: client1: iroute 192.168.0.0 255.255.255.0 client3: iroute 10.0.1.0 255.255.255.0 The server config has these routes configured: push "route 192.168.0.0 255.255.255.0" push "route 10.0.1.0 255.255.255.0" route 192.168.0.0 255.255.255.0 route 10.0.1.0 255.255.255.0 Kino's routing table looks like this: 192.168.150.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 10.0.1.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 192.168.0.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 192.168.150.2 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 Outpost's like this: 192.168.150 192.168.150.17 UGS 0 17 tun0 192.168.0 192.168.150.17 UGS 0 2 tun0 192.168.150.17 192.168.150.18 UH 3 0 tun0 And Guchuko's like this: 192.168.150.0 192.168.150.9 255.255.255.0 UG 0 0 0 tun0 10.0.1.0 192.168.150.9 255.255.255.0 UG 0 0 0 tun0 192.168.150.9 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 Now, the tests. Pings from Guchuko to Outpost's LAN IP work OK, as does the reverse - pings from Outpost to Guchuko's LAN IP. However... Pings from Outpost, to a machine on Guchuko's LAN work fine: .(( root@outpost )). (( 06:39 PM )) :: ~ :: # ping 192.168.0.3 PING 192.168.0.3 (192.168.0.3): 56 data bytes 64 bytes from 192.168.0.3: icmp_seq=0 ttl=63 time=462.641 ms 64 bytes from 192.168.0.3: icmp_seq=1 ttl=63 time=557.909 ms But a ping from Guchuko, to a machine on Outpost's LAN does not: .(( root@guchuko )). (( 06:43 PM )) :: ~ :: # ping 10.0.1.253 PING 10.0.1.253 (10.0.1.253) 56(84) bytes of data. --- 10.0.1.253 ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2000ms Guchuko's tcpdump of tun0 shows: 18:46:27.716931 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 1, length 64 18:46:28.716715 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 2, length 64 18:46:29.716714 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 3, length 64 Outpost's tcpdump on tun0 shows: 18:44:00.333341 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 3, length 64 18:44:01.334073 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 4, length 64 18:44:02.331849 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 5, length 64 So Outpost is receiving the ICMP request destined for the machine on it's subnet, but appears not be forwarding it. Outpost has gateway_enable="YES" in its rc.conf which correctly sets net.inet.ip.forwarding to 1 as mentioned earlier. As far as I know, that's all that's required to make a FreeBSD box forward packets between interfaces. Is there something else I could be forgetting ? FWIW, pinging 10.0.1.253 from Kino has the same result - the traffic does not get forwarded. UPDATE: I've found that I can only ping certain IP's on Guchuko's LAN from Outpost. From Outpost I can ping 192.168.0.3 and 192.168.0.2, but 192.168.99 and 192.168.0.4 are unreachable. The same tcpdump behavior can be seen. I think this means the problem can't be due to ipforwarding or routing, because Outpost can reach SOME hosts on Guchuko's LAN but not others and likewise, Guchuko can reach two hosts on Outpost's LAN, but not others. This baffles me.

    Read the article

< Previous Page | 473 474 475 476 477 478 479 480 481 482 483 484  | Next Page >