Search Results

Search found 25894 results on 1036 pages for 'ask the readers'.

Page 479/1036 | < Previous Page | 475 476 477 478 479 480 481 482 483 484 485 486  | Next Page >

• Create option to load Ubuntu or Windows 7 at start-up

  - by AXK

  We have a new Dell Optiplex 790 desktop with Windows 7 and just installed Ubuntu 12.04 on it using a USB stick that was configured as a boot drive. We created a new partition for Ubuntu during installation using the partition editor that comes up during installation. Everything seems to have gone fine with the installation except that, unexpectedly, there is no option to boot up Ubuntu when the computer is started. We just start the computer and Windows starts up with no option to ever start Ubuntu. The only way we have gotten Ubuntu to start is by putting the USB stick used for installation back into the computer and having the computer boot from it. Then GRUB shows up and the Ubuntu OS that we installed starts up (rather than the live-CD version on the USB stick). Previous times we have installed Ubuntu, GRUB shows up when we start the computer and we can choose among the various OSes installed. Can anyone suggest what to do? We want to have the option to launch either Windows 7 or Ubuntu 12.04 when we start the computer, with the default being Windows 7. Right now there is no option and Windows 7 just starts the way it did before we installed Ubuntu. Note that if we hit F1 soon after starting the computer, we get some sort of Windows bootloader (not sure of exact name) but there is no option for Ubuntu; just Windows 7. Also note that if we hit the shift key soon after starting the computer, as some help pages have suggested, nothing happens (Windows 7 is loaded as usual). Thanks in advance!

  Read the article

• Does upgrading a kernel automatically enable trim?

  - by Sheldon Ross

  Simple question, I have some servers that were running 10.04 that I upgraded to 12.04. So they were installed using 10.04 (kernel 2.6.32* I believe) and the version of ext4 that shipped then. By upgrading to 12.04 and the newer kernel, does that enable TRIM automatically? (Do I need to add 'discard' to the fstab?) Or do I need to do a clean install of 12.04 to get TRIM functionality on those drives.

  Read the article

• How to integrate ubuntu one in pcmanfm (Lubuntu file manager)?

  - by mac

  I have installed ubuntu-one on a Lubuntu machine and indeed the file syncing works for all the folder that are shared. My problem is that while on my ubuntu machine I can right click a folder and mark it as shared, I could not find a way to do the same under pcmanfm. The only workaround I was able to find is to use the daemon via command-line: u1sdtool --create-folder . which works but is kind of clumsy.... any way to integrate in the GUI?

  Read the article

• external USB HD doesn't show up on 'sudo fdisk -l' on one Ubuntu, shows up on another (both 'precise')

  - by Menelaos

  I have a 1.5TB WD external USB HDD and two Ubuntu systems, both 'precise'. When I plug the disk on system A it doesn't show up on the output of sudo fdisk -l nor is it automatically mounted (note that that wasn't always the case - it used to appear in the past). When I plug it on system B (again Ubuntu precise) it shows up when I do a sudo fdisk -l (output appended at the end) and mounts automatically just fine. What does this discrepancy point to and what kind of diagnostics should I run / tools I should use to troubleshoot the problem? I followed the suggestion I received to do a sudo tail -f /var/log/syslog and the output is the following when I plug, unplug and replug the USB cable on System A: Sep 14 23:27:09 thorin mtp-probe: checking bus 2, device 3: "/sys/devices/pci0000:00/0000:00:13.2/usb2/2-2" Sep 14 23:27:09 thorin mtp-probe: bus: 2, device: 3 was not an MTP device Sep 14 23:28:01 thorin kernel: [ 338.994295] usb 2-2: USB disconnect, device number 3 Sep 14 23:28:04 thorin kernel: [ 341.808139] usb 2-2: new high-speed USB device number 4 using ehci_hcd Sep 14 23:28:04 thorin mtp-probe: checking bus 2, device 4: "/sys/devices/pci0000:00/0000:00:13.2/usb2/2-2" Sep 14 23:28:04 thorin mtp-probe: bus: 2, device: 4 was not an MTP device Sep 14 23:29:54 thorin AptDaemon: INFO: Quitting due to inactivity Sep 14 23:29:54 thorin AptDaemon: INFO: Quitting was requested (I guess the last two message are irrelevant). Output of sudo fdisk -l on System B $ sudo fdisk -l Disk /dev/sda: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00070db4 Device Boot Start End Blocks Id System /dev/sda1 * 2048 2905114623 1452556288 83 Linux /dev/sda2 2905116670 2930276351 12579841 5 Extended /dev/sda5 2905116672 2930276351 12579840 82 Linux swap / Solaris Disk /dev/sdb: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9c849c84 Device Boot Start End Blocks Id System /dev/sdb1 * 63 488375999 244187968+ 7 HPFS/NTFS/exFAT Disk /dev/sdg: 1500.3 GB, 1500299395072 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930272256 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0003e17f Device Boot Start End Blocks Id System /dev/sdg1 2048 2930272255 1465135104 7 HPFS/NTFS/exFAT

  Read the article

• Is it possible to create a virtual drive and share via USB?

  - by Matthew

  My question is kind of hard to follow, but I'm asking if it's possible to make a virtual flash drive and sync it to another device with a USB to USB cable? To make things more clear, think of a typical flash drive. You connect it to a laptop and it shows up as a removable disk. Is it possible to make a computer a host of a "Virtual Drive" that would be connected to a USB cord on one end, and the other end connecting to another device such as a Xbox 360, or another computer.

  Read the article

• Windows 7/Ubuntu 12 dual boot deleted for Windows 8 installation. How to make grub rescue go away?

  - by dimious

  I had a Windows 7/Ubuntu 12 dual boot and I decided to clean install Windows 8 over them. The problem is that after I deleted all partitions and installed windows I was getting an "Operation system not found", however after an "enter" the system will normally boot into Windows 8. I realized that Windows did their trick and put the system (not partition anymore?!?) "tag" (Disk Management) on my media hard drive. After trying to fix the boot/mbr to be able to boot from my main drive the "Operation system not found" changed to the "grub rescue" prompt. I know that I cannot use that because I have killed the grub files. Windows can still boot as long as I choose to boot from the media drive. The question is, is there any way to move the "system", whatever it is now, to the main drive and have the PC boot from there, while making grub disappear? And if that is possible after that, can I just make the Media drive inactive or I will have to somehow remove the "system" tag?

  Read the article

• How do I rescue files from the encrypted home folder via live USB stick?

  - by Alexia

  I know, this has been asked and answered all over the internet already. However, I start feeling stupid, since the informations there are not helping me. Just this morning, I wanted to install the newest update to 13.10. After the download, when it came to the actual installing, the install program froze and didn't do anything for hours. At that time, I was still logged in. The computer was working and everything was accessable to me. However, I made the mistake and didn't immediately make safety copies of everything. Instead, I just rebooted. Long story short: My computer even fails to reset to a previous version via Grub. But I am able to boot from a USB stick and, after starting Nautilus, I see my home folder on the HD. I would now like to copy its contents onto an external harddisk. Problem 1: I have no rights to access the folder like that. Problem 2: It is encrypted. Problem 3: I don't know how to give myself the rights to access the folder nor do I know how to encrypt it. I assume that it might help that I still know these things: - my old login name - my old login phrase - a 32 characters long string of hexadecimal numbers that I copied to my list of passwords as "Ubuntu Encryption Code". I copied it digitally right after installing Ubuntu the first time and encrypting the home folder, so there won't be any typos. I am sure of that. The solutions that I saw so far, tell me that I need the "encryption phrase". But when I follow the instructions and use this phrase that I have in my list, I only get messages of denial. Can anyone help me through this special problem, please?

  Read the article

• How to speed up rsync/tar of large Maildir

  - by psusi

  I have a very large Maildir I am copying to a new machine ( over 100 BaseT ) with rsync. The progress is slow. VERY SLOW. Like 1 MB/s slow. I think this is because it is a lot of small files that are being read in an order that essentially is random with respect to where the blocks are stored on disk, causing a massive seek storm. I get similar results when trying to tar the directory. Is there a way to get rsync/tar to read in disk block order, or otherwise overcome this problem?

  Read the article

• Why can't I install 10.04 on a system that already has 8.04?

  - by Android Eve

  Ubuntu 10.04 is beautiful. I love it. I am dying to install it on my PC, alongside the existing Ubuntu 8.04 (from which I write this message right now). But... it won't let me! When I reach the partitioning stage (manual!) Ubuntu 10.04 sees my two HDDs as one RAID volume. It doesn't see all the partitions I already have in place in /dev/sda and /dev/sdb. Even Windows 7 doesn't behave like this... (yes, I actually managed to install Windows 7 64-bit in dual-boot configuration with Ubuntu 8.04 on this same system). Note: GParted on Ubuntu 10.04 (live CD) sees the partition intended for Ubuntu 10.04 (/dev/sda4) perfectly, but is unable to format it. Note: I also removed that partition trying to reformat it via GParted once 10.04 LiveCD is loaded. It didn't help. I believe that the problem lies in Ubuntu "deciding for me" that the HDDs should be "seen" as a RAID, hence any partition is seen by GParted as "busy" or "locked". Any idea how to solve this problem?

  Read the article

• Setting up multiple cores for apache solr for Ubuntu 12.04 and Drupal 7

  - by chrisjlee

  I'm setting up solr locally for my development purposes and integration with Drupal 7. I'm not very familiar with tomcat. My background has primarily been LAMP setups. So I went and installed the package provided by ubuntu for apache solr following this guide. sudo apt-get install tomcat6 tomcat6-admin tomcat6-common tomcat6-user tomcat6-docs tomcat6-examples sudo apt-get install solr-tomcat I've got that working. The apt-get package manager does a great job and allows me to setup solr but with one core. What steps need to be taken to enable multi core setup for apache solr? And below is my solr.xml file: sudo nano /var/lib/tomcat6/conf/Catalina/localhost/solr.xml <!-- Context configuration file for the Solr Web App --> <Context path="/solr" docBase="/usr/share/solr" debug="0" privileged="true" allowLinking="true" crossContext="true"> <!-- make symlinks work in Tomcat --> <Resources className="org.apache.naming.resources.FileDirContext" allowLinking="true" /> <Environment name="solr/home" type="java.lang.String" value="/usr/share/solr" override="true" /> </Context>

  Read the article

• Trendnet tew-424ub wireless not working after update 12.10

  - by dwa

  I updated packages from the software manager and now my wireless won't work. It's a Trendnet tew-424ub iwconfig says lo no wireless extensions. eth0 no wireless extensions. sudo lshw -C network: description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 02 serial: 1c:6f:65:46:e9:d4 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.1.137 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:41 ioport:de00(size=256) memory:fdaff000-fdafffff memory:fdae0000-fdaeffff memory:fda00000-fda0ffff lsusb: Bus 003 Device 002: ID 0bc2:3332 Seagate RSS LLC Expansion Bus 003 Device 003: ID 05e3:0605 Genesys Logic, Inc. USB 2.0 Hub [ednet] Bus 003 Device 006: ID 0457:0163 Silicon Integrated Systems Corp. 802.11 Wireless LAN Adapter Bus 005 Device 002: ID 046d:c00c Logitech, Inc. Optical Wheel Mouse Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 005: ID 0781:5530 SanDisk Corp. Cruzer Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Help? I'm not sure where to start. I've been browsing forums and such for a long time and nothing I try is working.

  Read the article

• Install on Acer Aspire 4752

  - by user216962

  I am at my wits end with this computer. I bought and Acer Aspire 4752 with a fully loaded version of Windows 7 on it. I prefer Ubuntu so I began to install 14.04 from USB. Got the error: [Errno 5] Input/output error This is often due to a faulty CD/DVD disk or drive, or a faulty hard disk. It may help to clean the CD/DVD, to burn the CD/DVD at a lower speed, to clean the CD/DVD drive lens (cleaning kits are often available from electronics suppliers), to check whether the hard disk is old and in need of replacement, or to move the system to a cooler environment. So I tried a different USB stick, same error. Tried different versions of Ubuntu, got the same error. I've used startup disk creator and Unetbootin to make start USB boot devices. I can boot with the USB drive and run Ubuntu that way. I even checked the hard drive using the tools in Ubuntu. Everything was fine, except it said the hard drive was hot. I tried a different hard drive. Got same error above. I ran a test with mem86, everything was fine. No matter what I do, using the USB gives me the Errno5 error. I then switched to using DVDs. Now I keep getting an uncompression error when installing Ubuntu 14.04 or 12.04. I can't figure out for the life of me why I get nothing but errors. Can anyone help?

  Read the article

• Wireless xbox360 pad connected with xboxdrv doesn't show in jstest

  - by Kyle Letham

  So Lubuntu 13.04, 3.4.0. I'm trying to use my wireless xbox controller. I've installed xboxdrv. I have to run it with sudo, or I get USBController::USBController(): libusb_open() failed: LIBUSB_ERROR_ACCESS. If I connect the adapter, run the program, and then press the button on the gamepad to connect it, it never really connects - just flashes like it's searching. If I reboot, leaving the controller searching, and run the command again while it's searching after I boot up, the controller connects (the light becomes solid in one corner). Using pkill xboxdrv and then relaunching it doesn't work. Regardless, no matter what I do, the gamepad never shows up in jstest-gtk. sudo xboxdrv --debug gives me: Controller: Microsoft Xbox 360 Wireless Controller (PC) Vendor/Product: 045e:0719 USB Path: 002:005 Wireless Port: 0 Controller Type: Xbox360 (wireless) [DEBUG] XboxdrvMain::run(): creating UInput [DEBUG] XboxdrvMain::run(): creating ControllerSlotConfig [DEBUG] UInput::create_uinput_device(): create device: 65534 [DEBUG] LinuxUinput::LinuxUinput(): Xbox Gamepad (userspace driver) 0:0 Any ideas?

  Read the article

• Microphone problem in Ubuntu 11.10

  - by Teja

  I am using both Windows 7 and Ubuntu 11.10 on a single system with the same hardware. While I'm making call through Gmail or Skype my voice is audible to others while I'm on Windows 7, but while I'm on Ubuntu 11.10 it's not audible to others, but I am able to hear their voice. But while I'm playing music on Ubuntu along with a call, the others are able to hear the music, but my voice is not audible for them. Please give me a solution for this and tell me where I can change the microphone settings on Ubuntu 11.10.

  Read the article

• Mouse Not Working Properly

  - by James

  I just did a clean install of Ubuntu 11.10 but for some reason the mouse isn't working properly. Problems I'm experiencing are: left button on the mouse doesn't work, the cursor doesn't highlight anything, as well, the right side will not do a double click function. Doesn't seem to bring up the mouse menu to "go back" as well, "go forward" options. In order to make things work, I have to use the Enter key, and arrow keys.

  Read the article

• Share home directory between Linux and Windows dual boot

  - by user877329

  This question is somewhat similar to How to use Windows Share has home directory, but in this case Windows is not running. I have installed a dual-boot configuration with Ubuntu 12.04 and Windows. My Windows partition is mounted on /C. Now I want either Ubuntu to locate home directories in /C/Users Which is the location of windows accounts or I want Windows to use D:\home for home directories. (D is the name of the Ubuntu root directory). For the first approach, I have managed to create a test user account test-user:x:1004:1001:Test:/C/Users/test-user:/bin/bash The account works but test-user cannot run any X session. From .xsession-errors chmod: Changing rights on ”/C/Users/test-user/.xsession-errors”: Operation not permitted Would it help get rid of that chmod, which has no effect? How do I? If I use the second approach, I need the Ext2fsd driver, which seems to work, but I am not sure if Windows maps the Ext2 system that early. Here is my fstab proc /proc proc nodev,noexec,nosuid 0 0 UUID=e7cef061-ed8d-4a82-b708-0c8f4c6f297f / ext3 errors=remount-ro 0 1 UUID=2CDCEB43DCEB0644 /C ntfs defaults,umask=007,gid=46 0 0 UUID=b087b5c0-b4bd-47e7-8d34-48ad9b192328 none swap sw 0 0 Update: I found something here: http://www.tuxera.com/community/ntfs-3g-advanced/ Will work if i do a correct mapping between NT users and Linux users.

  Read the article

• First time user here

  - by Brian

  Never used Linux before but I decided I want to start somewhere and Ubuntu seemed like the right place to start. I burned the 64bit version iso onto a CD and installed it onto a fresh new hard drive I got and it installed nicely or so I thought. First major problem was the fact that the screen slip oddly, second when I tried to log in everything just kind of froze, I could still move the cursor but thats it. I'm not too tech savy but I can follow instructions and any help given would be greatly appreciated. I am considering dual booting it with my other hard drive that has windows 7 on it but I'm afraid I might mess that up, plus if I do it that way I wouldn't know how to get rid of Ubuntu if I decide its not for me.

  Read the article

• GtkFileChooserButton 'Select Folder' mode returns no path

  - by user8592

  I have added a GtkFileChooserButton to my app via Glade. It is set to folder selection mode. When the widget is clicked it shows a dropdown list of Nautilus bookmarks with an 'other' option in the end. A new file chooser dialog is launched when 'other' is clicked. The button is not connected to any other custom file chooser dialog. The connecting signal I am using is 'file-set' and I am retrieving the fullpath of user selected folder using Gtk.FileChooser.get_current_folder (). This setup works fine if user selects a folder from 'other' option. But if a user selects a bookmark from dropdown list, no path is returned. How to solve this? Is there a way to disable this dropdown list and directly go to the filechooser dialog? I want to use GtkFileChooserButton only so that the user can get a preview of his selected folder.

  Read the article

• System in low graphics, deleted linux, grub rescue, can't access windows

  - by First timer

  So I'm pretty new to Ubuntu but I managed to install it with no big problems on both my desktop and netbook. When I installed it on my brother's netbook everything went horribly wrong and now I fear the system is close to beyond repair. The problem was first that it said it did not have any space left (seemed ridiculous since it had a lot). Then Ubuntu began booting into a "System is running in low graphics mode error" which I then tried to fix, using all the tips I could find in here but nothing helped. I think the graphics error and lack of space might have been related but I can't be sure. Finally I gave up repairing Ubuntu and went for a reinstall. Shouldn't have done that! I read that I should simply open Ubuntu through a live usb and choose GParted to delete the Linux partitions so I did and rebooted accordingly. Next, I was to install Ubuntu but now I am only given the option to wipe the whole disk for Ubuntu, not install along with windows 7. If I access GParted I can still see the ntfs partitions that hold windows 7 (there are 2: one labeled RECOVERY and another labeled OS and boot) so why can't I access them? Btw. the OS and boot has a little red mark with a warning that 1 cluster is referenced to multiple times, don't know what that means. If I boot without the live usb I am sent directly into a grub rescue "black screen of the computer will follow no orders". Please, I know that the easiest might be to simply wipe the whole thing clean but there are important files and programs on windows 7. Is there a way to just access windows? It is a dell inspiron 1018 mini netbook, so I have no cd input and no windows 7 installation cd.

  Read the article

• preseeded installation keeps asking for confirmation while creating RAID-Partitions on certain hardware-platform

  - by Marc Shennon

  I am aware of the partman-md/confirm_nooverwrite thing, that was the solution to most of this problems in the past. The thing is, that the preseed-file works for almost all hardware-platforms I tested, but only for one (Primergy MX130) it keeps asking for confirmation, before writing the partition-layout to the disks. All machines I tested are running with two SATA Disks, nothing special. I'm not really sure, what information could be needed in order to investigate the cause of this behaviour, but I would of course be willing to provide more information, if someone has an idea. Relevant part of the preseed file is the following: d-i partman-auto/disk string /dev/sda /dev/sdb d-i partman-auto/method string raid d-i partman-md/confirm boolean true d-i partman-partitioning/confirm_write_new_label boolean true d-i partman-md/device_remove_md boolean true d-i partman/choose_partition select finish d-i partman-md/confirm_nooverwrite boolean true # Write the changes to disks? d-i partman/confirm boolean true d-i mdadm/boot_degraded boolean true # RECIPE # Next you need to specify the physical partitions that will be used. d-i partman-auto/expert_recipe string \ multiraid :: \ 500 10000 1000000000 raid $lvmignore{ }\ $primary{ } \ method{ raid } \ . \ 512 1000 786 raid $lvmignore{ }\ $primary{ } \ method{ raid } \ . \ 8192 10240 10240 raid $lvmignore{ }\ method{ raid } \ . # Parameters are: # <raidtype> <devcount> <sparecount> <fstype> <mountpoint> <devices> <sparedevices> d-i partman-auto-raid/recipe string \ 1 2 0 ext4 / /dev/sda1#/dev/sdb1 . \ 1 2 0 ext2 /boot /dev/sda2#/dev/sdb2 . \ 1 2 0 swap - /dev/sda5#/dev/sdb5 .

  Read the article

• What are some tablets that can run Ubuntu?

  - by tacozmeister

  I can't believe I'm actually asking this, but what are some good, cheap tablets that can run Ubuntu? I'm considering getting a tablet, but I don't really want an expensive one like an iPad. And I love Ubuntu. So what tablets are out there that are cheap, but can also run Ubuntu 12.04 without much lag if it's installed after purchase? Personal anecdotes would be appreciated! Note: I'm not asking you to help me shop, just to formulate a list of tablets (+personal preference) that can use Ubuntu.

  Read the article

• Serious problem with mobile modems in UBUNTU to look [on hold]

  - by kitten 94

  I use mobile broadband using data card(modem) with simcard on ubuntu 14.04. My friends,relatives,boss used to make phone call to my sim on modem, & they get the ringsound on their phone but I cannot find any alert on ubuntu about the phone call. They think that I will call back to them & gets disappointed. Some even gets angry "that I am not attending the mobile call intensionally". They even do not not believe me,saying that computer can also pick a mobile call keeping mobile partner in their mind . Is there any way just to find out call & who it is call ? so that I can call to them later. or Is their any software like mobile partner to ubuntu to recive & make phone calls? Modem Manager GUI is helpful only just to send SMS, even USSD not works in it, inorder to receive SMS I have to close & open the windows repeatedly. please,please help me. Any help or ideas is thankful. Waiting for your's reply.

  Read the article

• DVD Drive Burner Not Working

  - by TheLastStego

  I'm attempting to burn Bodhi Linux to a blank DVD. It's a dual-layered DVD+R DL disc and my drive has burned to these discs before. I know bodhi will fit on a regular DVD or a CD but all I have at the moment is the dual layered DVDs. The computer I'm putting bodhi on doesn't support booting from USB either. When I try to write the bodhi iso to the DVD with xfburn, I get this error: http://i.stack.imgur.com/lxs0O.png I was able to burn to these exact DVDs about a week ago, preparing a video compilation using devede and xfburn. Using k3bm, I get an error saying "Failed To Write" and when using brasero (as a last attempt) I received the same error as with xfburn.

  Read the article

• help configuring my samba file server

  - by user281745

  Hello everyone I have installed all the files I needed for my samba file server. I have also installed the gadmin-samba 0.3.2. I am trying to set a user-name and password also I would like to know how to ad my laptops I own to the machines allowed to connect to it. it can be in terminal but preferably in gadmin-samba which is like a GUI. please be very descriptive my systems is Ubuntu 14.04 and Gadmin-Samba 0.3.2

  Read the article

• 11.10 had sound, 12.04 doesnt. Acer Aspire One D257

  - by Jeff Welling

  I'm wondering if anyone else has had this same problem, because if so it might be worth while for me to file a bug, but it might also be chaos monkey so I wanted to check first. I have an Acer Aspire One D257 and the sound worked in 11.10 by default, but after doing a fresh install of 12.04 there is no sound. There used to be a speaker icon on the menu bar but now there isn't, and volume up and volume down hotkeys now do nothing, which leads me to believe it isn't detecting the sound card properly anymore. Googling for sound problems on an Acer Aspire One D257 on 12.04 isn't showing any helpful results, so I'm wondering if it's just me. Does anyone have an AAO D257 on 12.04 with the sound working, and if so did you have to do anything special to make it work?

  Read the article

< Previous Page | 475 476 477 478 479 480 481 482 483 484 485 486  | Next Page >