Search Results

Search found 18191 results on 728 pages for 'single board'.

Page 479/728 | < Previous Page | 475 476 477 478 479 480 481 482 483 484 485 486  | Next Page >

  • .NET WebService IPC - Should it be done to minimise some expensive operations?

    - by Kyle
    I'm looking at a few different approaches to a problem: Client requests work, some stuff gets done, and a result (ok/error) is returned. A .NET web service definitely seems like the way to go, my only issue is that the "stuff" will involve building up and tearing down a session for each request. Does abstracting the "stuff" out to an app (which would keep a single session active, and process the request from the web service) seem like the right way to go? (and if so, what communication method) The work time is negligible, my concern is the hammering the transaction servers in question will probably get if I create/drop a session for each job. Is some form of IPC or socket based communication a feasible solution here? Thoughts/comments/experiences much appreciated. Edit: After a bit more research, it seems like hosting a WCF service in a Windows Service is probably a better way to go...

    Read the article

  • Facebook photo additions showing as separate / individual posts

    - by user1143693
    When posting additional photos to an existing Facebook album, each individual photo is being displayed on the mobile Facebook view as a separate post. Desktop display still groups them (correctly) into 1 album and shows as a single post. For instance, if I add 20 photos to an album, the people who have liked my page will see 20 individual posts in their feed from my account on their mobile devices. This has been happening for about 2 weeks now as far as I've noticed. My upload process has not changed. I should note that I've noticed this behavior by uploading via Lightroom as well as through the direct Facebook interface. Has anyone else experienced this? Did something change that I am not aware of? Thanks.

    Read the article

  • Threads to make video out of images

    - by masood
    updates: I think/ suspect the imageIO is not thread safe. shared by all threads. the read() call might use resources that are also shared. Thus it will give the performance of a single thread no matter how many threads used. ? if its correct . what is the solution (in practical code) Single request and response model at one time do not utilizes full network/internet bandwidth, thus resulting in low performance. (benchmark is of half speed utilization or even lower) This is to make a video out of an IP cam that gives a new image on each request. http://149.5.43.10:8001/snapshot.jpg It makes a delay of 3 - 8 seconds no matter what I do. Changed thread no. and thread time intervals, debugged the code by System.out.println statements to see if threads work. All seems normal. Any help? Please show some practical code. You may modify mine. This code works (javascript) with much smoother frame rate and max bandwidth usage. but the later code (java) dont. same 3 to 8 seconds gap. <!DOCTYPE html> <html> <head> <script type="text/javascript"> (function(){ var img="/*url*/"; var interval=50; var pointer=0; function showImg(image,idx) { if(idx<=pointer) return; document.body.replaceChild(image,document.getElementsByTagName("img")[0]); pointer=idx; preload(); } function preload() { var cache=null,idx=0;; for(var i=0;i<5;i++) { idx=Date.now()+interval*(i+1); cache=new Image(); cache.onload=(function(ele,idx){return function(){showImg(ele,idx);};})(cache,idx); cache.src=img+"?"+idx; } } window.onload=function(){ document.getElementsByTagName("img")[0].onload=preload; document.getElementsByTagName("img")[0].src="/*initial url*/"; }; })(); </script> </head> <body> <img /> </body> </html> and of java (with problem) : package camba; import java.applet.Applet; import java.awt.Button; import java.awt.Graphics; import java.awt.Image; import java.awt.Label; import java.awt.Panel; import java.awt.TextField; import java.awt.event.ActionEvent; import java.awt.event.ActionListener; import java.net.URL; import java.security.Timestamp; import java.util.Date; import java.util.concurrent.TimeUnit; import java.util.concurrent.atomic.AtomicBoolean; import javax.imageio.ImageIO; public class Camba extends Applet implements ActionListener{ Image img; TextField textField; Label label; Button start,stop; boolean terminate = false; long viewTime; public void init(){ label = new Label("please enter camera URL "); add(label); textField = new TextField(30); add(textField); start = new Button("Start"); add(start); start.addActionListener(this); stop = new Button("Stop"); add(stop); stop.addActionListener(this); } public void actionPerformed(ActionEvent e){ Button source = (Button)e.getSource(); if(source.getLabel() == "Start"){ for (int i = 0; i < 7; i++) { myThread(50*i); } System.out.println("start..."); } if(source.getLabel() == "Stop"){ terminate = true; System.out.println("stop..."); } } public void paint(Graphics g) { update(g); } public void update(Graphics g){ try{ viewTime = System.currentTimeMillis(); g.drawImage(img, 100, 100, this); } catch(Exception e) { e.printStackTrace(); } } public void myThread(final int sleepTime){ new Thread(new Runnable() { public void run() { while(!terminate){ try { TimeUnit.MILLISECONDS.sleep(sleepTime); } catch (InterruptedException ex) { ex.printStackTrace(); } long requestTime= 0; Image tempImage = null; try { URL pic = null; requestTime= System.currentTimeMillis(); pic = new URL(getDocumentBase(), textField.getText()); tempImage = ImageIO.read(pic); } catch(Exception e) { e.printStackTrace(); } if(requestTime >= /*last view time*/viewTime){ img = tempImage; Camba.this.repaint(); } } }}).start(); System.out.println("thread started..."); } }

    Read the article

  • Using switch and enumerations as substitute for named methods

    - by MatthewMartin
    This pattern pops up a lot. It looks like a very verbose way to move what would otherwise be separate named methods into a single method and then distinguished by a parameter. Is there any good reason to have this pattern over just having two methods Method1() and Method2() ? The real kicker is that this pattern tends to be invoked only with constants at runtime-- i.e. the arguments are all known before compiling is done. public enum Commands { Method1, Method2 } public void ClientCode() { //Always invoked with constants! Never user input. RunCommands(Commands.Method1); RunCommands(Commands.Method2); } public void RunCommands(Commands currentCommand) { switch (currentCommand) { case Commands.Method1: // Stuff happens break; case Commands.Method2: // Other stuff happens break; default: throw new ArgumentOutOfRangeException("currentCommand"); } }

    Read the article

  • How can I do more than one level of cascading deletes in Linq?

    - by Gary McGill
    If I have a Customers table linked to an Orders table, and I want to delete a customer and its corresponding orders, then I can do: dataContext.Orders.DeleteAllOnSubmit(customer.Orders); dataContext.Customers.DeleteOnSubmit(customer); ...which is great. However, what if I also have an OrderItems table, and I want to delete the order items for each of the orders deleted? I can see how I could use DeleteAllOnSubmit to cause the deletion of all the order items for a single order, but how can I do it for all the orders?

    Read the article

  • CodePlex Daily Summary for Thursday, October 11, 2012

    CodePlex Daily Summary for Thursday, October 11, 2012Popular ReleasesOstrivDB: OstrivDB 0.1: - Storage configuration: objects serialization (Xml, Json), storage file compressing, data block size. - Caching for Select queries. - Indexing. - Batch of queries. - No special query language (LINQ used). - Integrated sorting and paging. - Multithreaded data processing.Mido: Mido v0.7: Mido is the simplest utility that helps to make watermarks on images and resize them. It has a very thin installer. The program has beta mark but it is able to draw watermark text, watermark images, resize pictures. Change list: + Opacity option + Stroke option + Bold, italic, underline options + Show progress during loading of images + Allow rotate watermart + Allow write multiline text as watermark + Add text aligment if text contains several lines + Add button 'clear custom position' + A...D3 Loot Tracker: 1.5.4: Fixed a bug where the server ip was not logged properly in the stats file.Captcha MVC: Captcha Mvc 2.1.2: v 2.1.2: Fixed problem with serialization. Made all classes from a namespace Jetbrains.Annotaions as the internal. Added autocomplete attribute and autocorrect attribute for captcha input element. Minor changes. v 2.1.1: Fixed problem with serialization. Minor changes. v 2.1: Added support for storing captcha in the session or cookie. See the updated example. Updated example. Minor changes. v 2.0.1: Added support for a partial captcha. Now you can easily customize the layout, s...DotNetNuke® Community Edition CMS: 06.02.04: Major Highlights Fixed issue where the module printing function was only visible to administrators Fixed issue where pane level skinning was being assigned to a default container for any content pane Fixed issue when using password aging and FB / Google authentication Fixed issue that was causing the DateEditControl to not load the assigned value Fixed issue that stopped additional profile properties to be displayed in the member directory after modifying the template Fixed er...Advanced DataGridView with Excel-like auto filter: 1.0.0.0: ?????? ??????Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.69: Fix for issue #18766: build task should not build the output if it's newer than all the input files. Fix for Issue #18764: build taks -res switch not working. update build task to concatenate input source and then minify, rather than minify and then concatenate. include resource string-replacement root name in the assumed globals list. Stop replacing new Date().getTime() with +new Date -- the latter is smaller, but turns out it executes up to 45% slower. add CSS support for single-...WinRT XAML Toolkit: WinRT XAML Toolkit - 1.3.3: WinRT XAML Toolkit based on the Windows 8 RTM SDK. Download the latest source from the SOURCE CODE page. For compiled version use NuGet. You can add it to your project in Visual Studio by going to View/Other Windows/Package Manager Console and entering: PM> Install-Package winrtxamltoolkit Features Attachable Behaviors AwaitableUI extensions Controls Converters Debugging helpers Extension methods Imaging helpers IO helpers VisualTree helpers Samples Recent changes NOTE:...VidCoder: 1.4.4 Beta: Fixed inability to create new presets with "Save As".MCEBuddy 2.x: MCEBuddy 2.3.2: Changelog for 2.3.2 (32bit and 64bit) 1. Added support for generating XBMC XML NFO files for files in the conversion queue (store it along with the source video with source video name.nfo). Right click on the file in queue and select generate XML 2. UI bugifx, start and end trim box locations interchanged 3. Added support for removing commercials from non DVRMS/WTV files (MP4, AVI etc) 4. Now checking for Firewall port status before enabling (might help with some firewall problems) 5. User In...Sandcastle Help File Builder: SHFB v1.9.5.0 with Visual Studio Package: General InformationIMPORTANT: On some systems, the content of the ZIP file is blocked and the installer may fail to run. Before extracting it, right click on the ZIP file, select Properties, and click on the Unblock button if it is present in the lower right corner of the General tab in the properties dialog. This release supports the Sandcastle October 2012 Release (v2.7.1.0). It includes full support for generating, installing, and removing MS Help Viewer files. This new release suppor...ClosedXML - The easy way to OpenXML: ClosedXML 0.68.0: ClosedXML now resolves formulas! Yes it finally happened. If you call cell.Value and it has a formula the library will try to evaluate the formula and give you the result. For example: var wb = new XLWorkbook(); var ws = wb.AddWorksheet("Sheet1"); ws.Cell("A1").SetValue(1).CellBelow().SetValue(1); ws.Cell("B1").SetValue(1).CellBelow().SetValue(1); ws.Cell("C1").FormulaA1 = "\"The total value is: \" & SUM(A1:B2)"; var...Json.NET: Json.NET 4.5 Release 10: New feature - Added Portable build to NuGet package New feature - Added GetValue and TryGetValue with StringComparison to JObject Change - Improved duplicate object reference id error message Fix - Fixed error when comparing empty JObjects Fix - Fixed SecAnnotate warnings Fix - Fixed error when comparing DateTime JValue with a DateTimeOffset JValue Fix - Fixed serializer sometimes not using DateParseHandling setting Fix - Fixed error in JsonWriter.WriteToken when writing a DateT...Readable Passphrase Generator: KeePass Plugin 0.7.2: Changes: Tested against KeePass 2.20.1 Tested under Ubuntu 12.10 (and KeePass 2.20) Added GenerateAsUtf8 method returning the encrypted passphrase as a UTF8 byte array.TelerikMvcGridCustomBindingHelper: Version 1.0.15.279-RC3: TelerikMvcGridCustomBindingHelper 1.0.15.279 RC3 Release notes: This is a RC version (hopefully the last one), please test and report any error or problem you encounter. Configurable null handling when filtering (AcceptNullValuesWhenFiltering, NullSubstitutes and NullAliases) Internal DynamicWhereClause improvments GridGridCustomBindingHelper.UseProjections method now acept ProjectionsOptions parameter for easely determine which properties should be projected Isolate and hide some are...JSLint for Visual Studio 2010: 1.4.2: 1.4.2patterns & practices: Prism: Prism for .NET 4.5: This is a release does not include any functionality changes over Prism 4.1 Desktop. These assemblies target .NET 4.5. These assemblies also were compiled against updated dependencies: Unity 3.0 and Common Service Locator (Portable Class Library).Snoop, the WPF Spy Utility: Snoop 2.8.0: Snoop 2.8.0Announcing Snoop 2.8.0! It's been exactly six months since the last release, and this one has a bunch of goodies in it. In particular, there is now a PowerShell scripting tab, compliments of Bailey Ling. With this tab, the possibilities are limitless. It basically lets you automate/script the application that you are Snooping. Bailey has a couple blog posts (one and two) on his tab already, and I am sure more is to come. Please note that if you do not have PowerShell installed, y...Z3: Z3 4.1.2: Minor fixes. Now, z3 compiles with gcc 4.7.x.NET Micro Framework: .NET MF 4.3 (Beta): This is the 4.3 Beta version of the .NET Micro Framework. Feature List for v4.3 Support for Visual Studio 2012 (including the Windows Desktop Express version) All v4.2 QFEs features and bug fixes (PWM enhancements, lwIP and network driver reliability improvements, Analog Output, WinUSB and latest GCC support) Improved diagnostic information for deployment Decreased boot time Bug fixes Work Item 1736 - Create link for MFDeploy under start menu Work Item 1504 - Customizing lwIP o...New Projects.NET 4.0 Object/Function DLL interface: A Visual Basic .NET 4.0 Object / Function interface for quick and easy updating.AzureDirectory Library for Lucene.Net: This project allows you to create Lucene Indexes via a Lucene Directory object which uses Windows Azure BlobStorage for persistent storage.Building Modern Mobile Web Apps: This project provides guidance on building mobile web experiences using HTML5, CSS3, and JavaScript. Developing web apps for mobile browsers can be less forgiviC# Singleton Base-Class: C# Singleton Base Class is a single, simple C# class used to implement the Singleton pattern through inheritance.C++ Unit Test Library for Windows Store apps with Async Helper: This Visual Studio extension will install a project template for C++ Unit Test Library for Windows Store apps that contains async helper.Citrix Mobile Application SDK Samples: This site contains our latest prototype samples for the Citrix Mobile Application SDK for you to play with.eBrain Engine: eBrain Engine is a software to administer neuropsychological tests by means of advanced I/F devices like BCI P300 and eye-tracking systemsFairycake: A game about a little witch. Java. FedEx Connector for AbleCommerce Gold: This plugin provides FedEx rating and tracking services for the AbleCommerce shopping cart.Free - Simple Phone Book (SimPB): An alternative to backup your telephone contacts. Portable, easy to use, multilingual.GPXLocalTime2UTC: Time Format Converter, from Local to UTC, for GPX Files A small utility made to open GPX files (XML), search for the "time" tag, then transform the local time Grid Solutions Framework: Core classes to manage, analyze, and visualize real-time and historical data. This project combines the time-series framework and TVA code library projects.HireMe: HireMe is a HR application that works in conjunction with the HiremeMagazine.com website. The app will run in Android, iOS and WebOS.my-sim-asdf: my greate toolOdeToFoodMvc4: Source code for "Building Applications with ASP.NET MVC 4"OrgCharts for SharePoint: Months of planning, design, development and testing have gone into a truly phenomenal Org Chart experiencePDC BW2: A pkm editor application that tries to make easier legal pkm Packed with Legality Analysis, Event downloader and more...PI Payroll system: This is a payroll system for People Index, LLC.Project13251011: fsdQuickWick.NET - Agile Pproject Management: QuickWick.NET is a simple and effective web-based solution for agile project management.SharePoint 2010 Top Nav: This project was created when a project I was on required a Navigation scheme to manage site collections. SisGAC: Sistema de Gerenciamento de Artigos para CongressosTriDes_project_3AO: encryptohideVB6Doc: Visual Basic 6 Documentor (VB6 Doc)VideoChat: Simple VideoChat web-application on ASP.NET MVC4, SignalR, Wowza Media Server/Windows Updater Open: This is an alternative to the Windows Update software on all versions of Windows OS and the WSUS provided for corporations to update multiple machines.WOWAddonsUpdater: WPF App to update lua addons for the Blizzard World of warcraft gameyygua: email:huliang@yahoo.cnZJUDTS2: ????Silverlight?????????

    Read the article

  • Getting closure-compiler and Node.js to play nice

    - by bukzor
    Are there any projects that used node.js and closure-compiler (CC for short) together? The official CC recommendation is to compile all code for an application together, but when I compile some simple node.js code which contains a require("./MyLib.js"), that line is put directly into the output, but it doesn't make any sense in that context. I see a few options: Code the entire application as a single file. This solves the problem by avoiding it, but is bad for maintenance. Assume that all files will be concatenated before execution. Again this avoids the problem, but makes it harder to implement a un-compiled debug mode. I'd like to get CC to "understand" the node.js require() function, but that probably can't be done without editing the compiler itself, can it?

    Read the article

  • I need to debug my BrowserHelperObject (BHO) (in C++ with Visual Studio 2008) after a internet explo

    - by BHOdevelopper
    Hi, here is the situation, i'm developping a Browser Helper Object (BHO) in C++ with Visual Studio 2008, and i learned that the memory wasn't managed the same way in Debug mode than in Release mode. So when i run my BHO in debug mode, internet explorer 8 works just fine and i got no erros at all, the browser stays alive forever, but as soon as i compile it in release mode, i got no errors, no message, nothing, but after 5 minutes i can see through the task manager that internet explorer instances are just eating memory and then the browser just stop responding every time. Please, I really need some hint on how to get a feedback on what could be the error. I heard that, often it was happening because of memory mismanagement. I need a software that just grab a memory dump or something when iexplorer crashes to help me find the problem. Any help is appreciated, I'll be looking for responses every single days, thank you.

    Read the article

  • Javascript form validation/sanitizing do i need regex here ?

    - by user318144
    I have a single form input that is for checking domains. Sometimes people type in www. before the domain or .com after the domain name. The service that i use to check availability automatically checks for all top level domains so when people add the .com at the end it becomes redundant. For example the string submitted is domainname.com.com which is clearly invalid. I understand you can do this on the server side but due to some rather weird circumstance i must use javascript for this. So is regex the solution here ? If so is there some kind of regex generator i can use for this or can someone point me in the right direction with a code snippet perhaps ? Appreciate any help thanks!

    Read the article

  • How to reset lstset settings for listings?

    - by drittesbinom
    At the top of my tex document, I set my sourcecode listing format by \lstset{language=java} \lstset{numbers=left, numberstyle=\tiny, numbersep=5pt, breaklines=true} \lstset{emph={square}, emphstyle=\color{red}, emph={[2]root,base}, emphstyle={[2]\color{blue}}} because I merely list Java source code. At one point in my document, I had to reformat for a single listing by \lstset{commentstyle=\footnotesize\textit} \lstset{basicstyle=\ttfamily\fontsize{11}{12}\selectfont} \lstset{literate= {!=} {$\neq$}{2}} Now I have the problem that my previous Java formatting for listings is destroyed, and I dont know how to reset the lst settings to default. How can this be avoided?

    Read the article

  • Online Advetisement/Banner Management System

    - by Sumesh Joshi
    I am developing site for online advertisements where sellers and buyers can come and sell/buy advertisements. Just need to develop detailed statistics like click counts, from which page clicks are coming (one advertisement can be placed on many pages), from which position (top, right, left ...) click are coming (one advertisement can be placed in different position on single page) etc. I seen that most of the advertisement on popular websites has following format: http://ads.stackoverflow.com/a.aspx?Task=Click&ZoneID=3&CampaignID=838&AdvertiserID=50&BannerID=1335&SiteID=1&RandomNumber=1463177307&Keywords=c%23%2c.net%2ccollections%2cdictionary%2chashtable It has many parameters like ZoneID, CampaignID, AdvertiserID, BannerID, SiteID, RandomNumber, adid, adcrid, obid, obtid and way. I can use one advertisement (adid) in multiple pages. But can't figure out the way to distinguish between from which pages clicks are coming. How can I use such parameters to generate statistics which tell me the page from which clicks are coming?

    Read the article

  • Unable to locate the Bug

    - by tzenes
    I was recently on The Daily WTF when I came across this old post. In it the author mentions that one of the programmers changed this code: int main (int argc, char **argv) { int x; char data_string[15]; ... x = 2; strcpy(data_string,"data data data"); ... } To this code: int main (int argc, char **argv) { int x = 2; char data_string[15] = "data data data"; ... } The author goes on to mention: [the coder] changed every single variable to be initiated on the stack For the life of me I cannot see how this change could be harmful, and I am worried that it is a lapse in my C knowledge. What is the WTF?

    Read the article

  • MYSQL, Subquery Reference in Union

    - by christian
    Is there any way to reference a subquery in a union? I am trying to do something like the following, and would like to avoid a temporary table, but the subquery will be drawn from a much larger dataset so it makes sense to only do it once.. SELECT * FROM (SELECT * FROM ads WHERE state='FL' AND city='Maitland' AND page='home' ORDER BY RAND()) AS sq WHERE spot = 'full-banner' LIMIT 1 UNION SELECT * FROM sq WHERE spot = 'leaderboard' LIMIT 1 UNION SELECT * FROM sq WHERE spot = 'rectangle1' LIMIT 1 UNION SELECT * FROM sq WHERE spot = 'rectangle2' LIMIT 1 .... etc,, It's a shame that DISTINCT can't be specified for a single column of a result set.

    Read the article

  • Threading multiple WebBrowser in VB .net

    - by Code_Seeker
    I'm building a multiple webbrowser inside tabs( 1 predefine webbrowser control per tab) and I want them all to load at the same time or other words must run in thread. Unfortunately I feel a valid fact came from the error message that this is something not possible. Pls help me to check my simple program code below and its error in case i tried releasing 2 webbrowser controls but when I leave it to single web browser control it works fine. Any workaround? Imports System.Threading Public Class Form1 Dim mythread1 As Thread Dim mythread2 As Thread Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load mythread1 = New Thread(AddressOf mysub1) mythread2 = New Thread(AddressOf mysub2) mythread1.IsBackground = True mythread2.IsBackground = True mythread1.Start() mythread2.Start() End Sub Public Sub mysub1() Dim HTML As String WebBrowser1.Navigate("about:blank") mythread1.Abort() End Sub Public Sub mysub2() WebBrowser2.Navigate("about:blank") mythread2.Abort() End Sub

    Read the article

  • Policy based design and defaults.

    - by Noah Roberts
    Hard to come up with a good title for this question. What I really need is to be able to provide template parameters with different number of arguments in place of a single parameter. Doesn't make a lot of sense so I'll go over the reason: template < typename T, template <typename,typename> class Policy = default_policy > struct policy_based : Policy<T, policy_based<T,Policy> > { // inherits R Policy::fun(arg0, arg1, arg2,...,argn) }; // normal use: policy_base<type_a> instance; // abnormal use: template < typename PolicyBased > // No T since T is always the same when you use this struct custom_policy {}; policy_base<type_b,custom_policy> instance; The deal is that for many abnormal uses the Policy will be based on one single type T, and can't really be parameterized on T so it makes no sense to take T as a parameter. For other uses, including the default, a Policy can make sense with any T. I have a couple ideas but none of them are really favorites. I thought that I had a better answer--using composition instead of policies--but then I realized I have this case where fun() actually needs extra information that the class itself won't have. This is like the third time I've refactored this silly construct and I've got quite a few custom versions of it around that I'm trying to consolidate. I'd like to get something nailed down this time rather than just fish around and hope it works this time. So I'm just fishing for ideas right now hoping that someone has something I'll be so impressed by that I'll switch deities. Anyone have a good idea? Edit: You might be asking yourself why I don't just retrieve T from the definition of policy based in the template for default_policy. The reason is that default_policy is actually specialized for some types T. Since asking the question I have come up with something that may be what I need, which will follow, but I could still use some other ideas. template < typename T > struct default_policy; template < typename T, template < typename > class Policy = default_policy > struct test : Policy<test<T,Policy>> {}; template < typename T > struct default_policy< test<T, default_policy> > { void f() {} }; template < > struct default_policy< test<int, default_policy> > { void f(int) {} }; Edit: Still messing with it. I wasn't too fond of the above since it makes default_policy permanently coupled with "test" and so couldn't be reused in some other method, such as with multiple templates as suggested below. It also doesn't scale at all and requires a list of parameters at least as long as "test" has. Tried a few different approaches that failed until I found another that seems to work so far: template < typename T > struct default_policy; template < typename T, template < typename > class Policy = default_policy > struct test : Policy<test<T,Policy>> {}; template < typename PolicyBased > struct fetch_t; template < typename PolicyBased, typename T > struct default_policy_base; template < typename PolicyBased > struct default_policy : default_policy_base<PolicyBased, typename fetch_t<PolicyBased>::type> {}; template < typename T, template < typename > class Policy > struct fetch_t< test<T,Policy> > { typedef T type; }; template < typename PolicyBased, typename T > struct default_policy_base { void f() {} }; template < typename PolicyBased > struct default_policy_base<PolicyBased,int> { void f(int) {} };

    Read the article

  • Is git suitable for one developer without server

    - by Shawn Mclean
    I am a single developer without another computer to backup my projects on. I'm looking into source controls and I came across git but all the setup tutorials are targeted to an external server. I used to use SourceGear Vault, but seeing that git is getting alot of attention, I might as well familiarize myself with it. I do not always have internet access. Is Git suitable for me? Can I be pointed in the right direction to set it up? Visual Studio 2008. Windows 7.

    Read the article

  • Can you have too many Delegate.BeginInvoke calls at once?

    - by stewsha
    I am cleaning up some old code converting it to work asynchronously. psDelegate.GetStops decStops = psLoadRetrieve.GetLoadStopsByLoadID; var arStops = decStops.BeginInvoke(loadID, null, null); WaitHandle.WaitAll(new WaitHandle[] { arStops.AsyncWaitHandle }); var stops = decStops.EndInvoke(arStops); Above is a single example of what I am doing for asynchronous work. My plan is to have close to 20 different delegates running. All will call BeginInvoke and wait until they are all complete before calling EndInvoke. My question is will having so many delegates running cause problems? I understand that BeginInvoke uses the ThreadPool to do work and that has a limit of 25 threads. 20 is under that limit but it is very likely that other parts of the system could be using any number of threads from the ThreadPool as well. Thanks!

    Read the article

  • ContextSwitchDeadlock Was Detected error in C#

    - by assassin
    Hi, I am running a C# application, and during run-time I get the following error: The CLR has been unable to transition from COM context 0x20e480 to COM context 0x20e5f0 for 60 seconds. The thread that owns the destination context/apartment is most likely either doing a non pumping wait or processing a very long running operation without pumping Windows messages. This situation generally has a negative performance impact and may even lead to the application becoming non responsive or memory usage accumulating continually over time. To avoid this problem, all single threaded apartment (STA) threads should use pumping wait primitives (such as CoWaitForMultipleHandles) and routinely pump messages during long running operations. Can anyone please help me out with the problem here? Thanks a lot.

    Read the article

  • Read and Write in the same file with different process

    - by muruga
    I have written the two program. One program is write the content to the text file simultaneously. Another program is read that content simultaneously. But both the program should run at the same time. For me the program is write the file is correctly. But another program is not read the file. I know that once the write process is completed than only the data will be stored in the hard disk. Then another process can read the data. But I want both read and write same time with different process in the single file. How can I do that? Please help me.

    Read the article

  • How to manually verify a user against the asp.net memberhip database

    - by Ekk
    I would like to know how I can verify a user's credential against an existing asp.net membership database. The short story is that we want provide single sign on access. So what I've done is to connect directly to the membership database and tried to run a sql query against the aspnet_Membership table: private bool CanLogin(string userName, string password) { // Check DB to see if the credential is correct try { string passwordHash = FormsAuthentication.HashPasswordForStoringInConfigFile(password, "SHA1"); string sql = string.Format("select 1 from aspnet_Users a inner join aspnet_Membership b on a.UserId = b.UserId and a.applicationid = b.applicationid where a.username = '{0}' and b.password='{1}'", userName.ToLowerInvariant(), passwordHash); using (SqlConnection sqlConn = new SqlConnection(ConfigurationManager.ConnectionStrings["LocalSqlServer"].ConnectionString)) using (SqlCommand sqlCmd = new SqlCommand(sql, sqlConn)) { sqlConn.Open(); int count = sqlCmd.ExecuteNonQuery(); sqlConn.Close(); return count == 1; } } catch (Exception ex) { return false; } } The problem is the password value, does anyone know how the password it is hashed?

    Read the article

  • how to populate an entity you have extended in the Entity Framework?

    - by user169867
    I have an entity in my EDMX that I've extended with a few fields in a partial class like this: public partial class Employee { public string JobName {get;set;} } These properties are for display only. In the above example say the entity has a JobTypeID property. I wish JobName to be populated w/ the name that belongs to that JobTypeID. Is there anyway to query the employee record in EF including the value for the JobName property w/o explicity assigning each field using select()? The reason I ask is that there are a lot of fields in the Employee entity so I'd like to be able to take advantage of something like: ctx.Employees.Where(e=>e.EmployeeID==employeeID).Single() ...add somehow fill in JobName too Is this possible?

    Read the article

  • SQL to get friends AND friends of friends of a user

    - by Enrique
    My MySQL tables structure is like this. USER int id varchar username FRIEND_LIST int user_id int friend_id For each friend relationship I insert 2 records in FRIEND_LIST. If user 1 is friend of user 2 then the next rows are inserted into FRIEND_LIST 1,2 2,1 I want to get the friends and friends of friends of an specific user. The select should return columns a, b, c. a: user_id b: friend_id c: username (username of friend_id ) If 1 is friend of 2 and 3. 2 is friend of 3, 4 and 5 3 is friend of 5,6,7 Then the query to get 1's friends and friends of friends should return: 1 2 two 1 3 three 2 1 one 2 3 three 2 4 four 2 5 five 3 1 one 3 5 five 3 6 six 3 7 seven Can I get this rows with a single query?

    Read the article

  • How to redirect to the current page with form in php?

    - by garcon1986
    Hello, I tried to redirect to the current page with form in my php application. Now i have met a problem. <form name="myform" action="?page=matching" method="GET"> <input id="match_button" type="submit" name="button" value="button" onClick="func_load3()" /> </form> action="?page=matching" means the current page, because i use the single entry in my php application. With the code upon, When i click the button, it redirects to the homepage. And I tried to use: <form name="myform" action="<?php echo $_SERVER['PHP_SELF']; ?>" method="GET"> but it still doesn't work. So i have to ask for help from you. Do you have any ideas about that? How to fix it? Thanks in advance.

    Read the article

  • Controlling symbol generation in Clojure macros

    - by mikera
    I'm trying (as a self-learning exercise) to create a Clojure macro that will generate code to apply a function to a sequence of integers and sum the result, e.g. f(0) + f(1) + f(2) + f(3) This is my attempt: (defmacro testsum [func n] `(fn [x#] (+ ~@( map (fn [i] `(~func x#)) (range n))))) However something seems to go wrong with the x# gensym and I end up with two different versions of x and hence the function doesn't work: (macroexpand '(testsum inc 3)) gives: (fn* ([x__809__auto__] (clojure.core/+ (inc x__808__auto__) (inc x__808__auto__) (inc x__808__auto__)))) This is pretty much exactly what I want apart from the different 809 and 808 versions of x..... What am I doing wrong? I thought that the auto gensym was meant to create a single unique symbol for exactly this kind of purpose? Is there a better way of doing this?

    Read the article

  • controling individual pins on a serial port

    - by Faken
    I know that serial ports work by sending a single stream of bits in serial. I can write programs to send and receive data from that one pin. However, there are a lot more other pins on the serial port connection that normal aren't used but from documentation all seem to have some sort of function for signalling as opposed to data transfer. Is it possible in any way to cause the other pins that are not used for direct data transfer to be controlled individual? If so, how would i go about doing that?

    Read the article

< Previous Page | 475 476 477 478 479 480 481 482 483 484 485 486  | Next Page >