Search Results

Search found 47491 results on 1900 pages for 'super x man'.

Page 484/1900 | < Previous Page | 480 481 482 483 484 485 486 487 488 489 490 491  | Next Page >

  • NTFS write speed really slow (<15MB/s) on Ubuntu

    - by Zulakis
    When copying large files or testing writespeed with dd, the max writespeed I can get is about 12-15MB/s on drives using the NTFS filesystem. I tested multiple drives (all connected using SATA) which all got writespeeds of 100MB/s+ on Windows or when formatted with ext4, so it's not an alignment or drive issue. top shows high cpu usage for the mount.ntfs process. AMD dual core processor (2.2 GHz) Kernel version: 3.5.0-23-generic Ubuntu 12.04 ntfs-3g version: both 2012.1.15AR.1 (Ubuntu default version) and 2013.1.13AR.2 How can I fix the writespeed?

    Read the article

  • Router/Security question: Am I hacked?

    - by IVR Avenger
    Hi, all. I've noticed that my home broadband speed seems to be a bit slow in recent days. I noticed, last night, that my Wireless Router had given a DHCP lease to a public IP address with an odd formation; something like 111.10.11.110. Should I consider these warning sings of my ZyXEL router being compromised in some way? Thanks, IVR Avenger

    Read the article

  • MASM Syntax Highlighting in C++ for Visual Studio 2010

    - by Ian Mallett
    So, I had Visual Studio 2010 Ultimate, and everything was great. However, I was confused, thought I wanted MASM, and installed the SDK. This causes strange problems for syntax highlighting. When I'm editing a C/C++ file, for instance, a lot of words (e.g., "data", "add", "sub", "mul", "div", "eax", etc.) are highlighted. At first, I thought I'd just learn to live with it, but it has gotten annoying. I could find nothing online, so, I deleted the MASM folder completely (method of uninstallation), uninstalled Visual Studio, and then installed it again. I firedit up, and the problem persists. Any clues? Thanks, Ian

    Read the article

  • conditional formatting for subsequent rows or columns

    - by Trailokya Saikia
    I have data in a range of cells (say six columns and one hundred rows). The first four column contains data and the sixth column has a limiting value. For data in every row the limiting value is different. I have one hundred such rows. I am successfully using Conditional formatting (e.g. cells containing data less than limiting value in first five columns are made red) for 1st row. But how to copy this conditional formatting so that it is applicable for entire hundred rows with respective limiting values. I tried with format painter. But it retains the same source cell (here limiting value) for the purpose of conditional formatting in second and subsequent rows. So, now I am required to use conditional formatting for each row separately s

    Read the article

  • Install EncFS on Mountain Lion (OS X 10.8)

    - by emempe
    I use EncFS to encrypt my files. So far, I've been using the installer provided by BoxCryptor. It packs EncFS 1.7.4, MacFuse and MacFusion in one installer and works nicely on Mountain Lion. But MacFuse is not actively developed and most people might replace it with Fuse for OS X or something similar. Are there other packaged installers for EncFS? Or do you always compile EncFS from source? If so, is there a tutorial on how to compile?

    Read the article

  • Where to get grub files without using grub-install

    - by Jacky
    I am in a particular situation. I have a MacBook Pro with no internal CD drive and both MacOS X (minimal setup) and Linux (my main system) is installed. During a cross-upgrade to Ubuntu 12.04 I messed up grub, so that my /boot/grub directory is basically empty. This means I can't boot Linux on the laptop anymore but only get into grub rescue. Normally this is no issue as you'd just boot from a rescue CD or USB stick, but unfortunately with a MacBook Pro this is not possible (I have reFIT installed and it attempts to boot, but it fails and the manual says that Apple's EFI firmware is not able to handle this situation). From MacOS X, however, I still have write access to the Linux partition. I've now been trying to figure out how to populate the /boot/grub folder with the necessary files, to no avail so far. The ISO image of Ubuntu 12.04 contains an EFI folder which is not what I am looking for, instead I need the normal.mod files for the grub version of Ubuntu 12.04. I do not have any other machine to set up a virtual machine of Ubuntu 12.04 to extract this from after a grub-install, so I am asking for ideas here how to solve this mess. P.S.: I installed the Linux previously when I still had a working internal CD drive. This is gone now.

    Read the article

  • esxi change MKS port

    - by Daniel Powell
    I need to connect to my home esxi box over the web however I cannot use the default port 902 for the console viewer due to firewall restrictions. Is there a way to change this port somewhere even if i can just do some nat and redirect any other port to that port? I've had a look around and when I try to connect to the esxi server in vSphere client I cant find anywhere I can specify the port. I know this is not the recommended way to do this but its a testing server and security is not an absolute must on this box. I also cannot setup a vpn to this box.

    Read the article

  • How do I align the bottom edges of two monitors with xrandr?

    - by denaje
    I have two outputs that I'd like to use on my laptop: LVDS1 - 1366x768 HDMI1 - 1920x1080 I set my monitors up like so: xrandr --output LVDS1 --auto --output HDMI1 --auto --right-of LVDS1 This is all well and good, but my laptop sits considerably lower than my external monitor, and with the top edges of the screens being aligned, it makes the jump from one screen to the other rather unintuitive. Is there a way I can align the bottom edges instead? I thought I could use the --pos flag to do this, but I have tried and not seen any difference (perhaps I do not know how to use it properly). EDIT: Solved. Thanks to tink's link, I deconstructed the Python script and discovered the way to do this is as follows: xrandr --output LVDS1 --pos 0x312 # 312 = 1280 - 768 xrandr --output HDMI1 --pos 1366x0 Not sure I understand exactly what the --pos flags are doing here, but it at least works!

    Read the article

  • Windows XP Problem

    - by LoRdiE
    I'm facing error on Windows XP Start, KEYBOARD not work and can't choose Start windows normally. After wait 30 seconds, windows not start. I'm test with Windows Live CD and keyboard work well. How can i fix?

    Read the article

  • DMG image containing Mac OS X 10.6.5 update not recognized

    - by Lawliet
    Hello, I want to update my Mac OS X 10.6.3 and want to use the manual package update (not Software Update) and I am having this problem for two days now. First I downloaded Mac OS X 10.6.5 Combo update and on the first opening it popped up a message saying "Unable to mount: disk image not recognized". I thought that somehow the image became corrupt during the download, so I downloaded it again. Same result. And I downloaded again. And again... No use, it still states that the .dmg is not recognized. Then I tried to update my system from 10.6.3 to 10.6.4 using the same method (package installer). It worked. And of course I downloaded the 10.6.5 update (not the combo package, but the 10.6.4 10.6.5 update package)... guess what. Not recognized. I don't understand how is this possible. Did anyone has the same problem? Please don't advice me to use software update, as I need to do that on multiple Macs Thanks in advance.

    Read the article

  • XBMC DVB-T and Played Video filling screen

    - by Tubs
    I have a small PC running as an XBMC attached to a Samsung le37m87bd. The PC isn't powerful enough to output a full HD 1080 image at 1920x1080 which is the TVs native resolution (about every 1/2 a second things go extra fast, I assume skipping frames), so I want to reduce this. Annoyingly, the TV does not support any other widescreen resolutions. (720 etc) If I use a a 4:3 image, the TV stretches it to be the 16:9, however, all 16:9 content is stretched sideways as XBMC is sending out a 4:3 image with a 16:9 image inside. Is there anyway I can force XBMC to compensate for this, ie stretch vertically so that black bars are removed, but not stretched horizontally?

    Read the article

  • (Mac Intel) HP PS driver prints in B&W from Adobe Reader after installing Cannon PS driver

    - by JohnB
    I have a unique problem that leaves me at a loss as to where to start troubleshooting. We have three Macs we use for graphics, two of which are PowerPC and one which is Intel. They are set up to print to an HP 5500dn, but occasionally this printer gets tied up with a massive print job, so I installed the PS driver (iR-PSv1.81MacOSX) for the Cannon C3200 Printer/copier on each of the machines. Both of the PowerPC Macs installed without issue, but the Intel Mac exhibits strange behavior: I've confirmed that while the Cannon driver is installed (whether or not the Cannon is set up for printing in print settings), the HP 5500dn will print in color from Safari, but only prints in black and white from Adobe Reader. The Cannon printer itself has not exhibited any strange behavior As soon as the Cannon driver is uninstalled, the HP 5500dn prints in color from Adobe Reader again. We run a network of Windows PCs, and the 'Mac room' mostly takes care of itself, so we don't have any experienced Mac administrators onsite. The Cannon is capable of Appletalk, but the PS driver seemed easier to work with (and Appletalk is currently disable on the Cannon. I'm not against using the Appletalk compatible drivers, but I would rather use the PS driver if at all possible - I don't want to open up the proverbial can of worms. If someone has any clues or suggestions that would help troubleshoot this problem, I would be grateful. I've already done some googling, but due to the obscure nature of this problem, I haven't been very successful. I don't like to create multiple threads on multiple sites, but I'm posting here due to Chopper3's suggestion on my post on ServerFault (http://serverfault.com/questions/135349/mac-intel-hp-ps-driver-prints-in-bw-from-adobe-reader-after-installing-cannon)

    Read the article

  • PC powers off at random times

    - by Timo Huovinen
    Short Version After experiencing some problems with Mobo batteries my PC started to power off at random times, the power off is instant and sudden and does not restart afterwards, need help figuring out the cause. Facts: Powers off when PC is playing games Powers off when PC is idle Powers off when PC is in safe mode Powers off when PC is in BIOS Powers off when PC is booted through a Windows installation USB Replaced the motherboard battery several times Replaced the 650W PSU with a 750W PSU Replaced the RAM Swapped the RAM between slots Re-applied thermal paste to the CPU Checked if the motherboard touches the case Nothing is overclocked PC Specs PC specs: OS: Windows 7 Ultimate SP1 RAM: klingston 1333MHz 4GB stick CPU: AMD Phenom II x4 955 Mobo: Gigabyte 88GMA-UD2H rev 2.2 Motherboard battery: CR2032 3v HDD: 500GB Seagate ST3500418AS ATA Device Graphics: ATI/AMD Radeon HD 6870 Very Long version Around 10 months ago I built a brand new gaming PC. Around 6 months ago it's time setting in windows started resetting to the year 2010. I swapped the Motherboard battery for a new one of the exact same size and shape and voltage, and the problems disappeared...for around 2 weeks. Then the same problem happened again, time gets reset, I swapped the battery again, and the problem was gone for good and everything was great for about 3 months.. then another problem started happening, the PC started to power off suddenly and without warning at completely random times, sometimes the PC works for and hour, sometimes 5 minutes. So I read on the forums that it might be either the PSU or the motherboard Battery or RAM or HDD or the Graphics card or the CPU or the motherboard or the drivers or a Virus or Grounding issues, or something short circuiting, basically it can be anything... I spent some days researching, and decided to remove the possibility of a virus. I reset the CMOS, cleared all BIOS settings and reinstalled windows 7 after a full format of the HDD, but the random power off kept happening. I then disabled the restart on error option in windows and looked at the event log for error events, but they did not help me figure out the problem. Network list service depends on network location awareness the dependency group failed to start Source Kernel Power Event 41 Task Category 63 Source Disk Event ID 11 Task Category None The driver detected a controller error on device disk I took apart the PC, every little piece, re-applied some expensive thermal paste to the CPU, and double checked that none of the pieces are touching the PC case. The problem was gone, the PC no longer powered off randomly I re-attached the graphics card and all was good for 4 months... then the power off problem appeared again, but was happening at high intervals, the PC would shutdown once in 2 days on average, at random points in time, sometimes when it's idle all day long, sometimes when it's running CRYSIS 2. I checked the CPU temperature, because I know that AMD CPU's have a built in protection mechanism that switches off the PC if the CPU gets too hot, and the Temp was 50C system temp, and 45C CPU after running the PC all day long (I did not do tests to see if there are any temperature spikes, don't know how to do them) Originally the PSU that powered the PC was 650Watts and had one 4 pin cable to power the CPU, I replaced it with a new 750Watts PSU which has two 4 pin cables for the CPU, but the problem remained. I removed the graphics card and let the motherboard use the built in one, but the PC kept suddenly powering off at random times. I took apart the PC completely again, and re-applied thermal paste to the CPU, added lots of insulation, and checked for any type of short-circuit possibility again and again, but the problem remained. The problem was like that for some months. I replaced the Battery a couple of times over the time, changed lots of options in windows, and tried everything I could, but it kept powering off, so I stopped using the PC as much as I used to, just living with the random power offs from time to time, until a couple of days ago, when the power off happens almost immediately after powering on the PC. I replaced the RAM with a brand new one, but that did not help. Took apart the PC again, checked for anything anywhere that might cause it, found some small scratches on the very edge of the motherboard to the left of the PCI express x16 slot. This might cause the problem, I thought, but the scratch looks very superficial, not deep at all, and if the scratch did harm the motherboard, wouldn't it cause it to not start at all? And why did it start to power off a while ago, and then suddenly stop powering off? The scratches could not have vanished??? did chkdsk \d but it powered off when it was at 75% I removed the hard disks, the graphics card, while I fiddled with the BIOS settings, and suddenly the PC shut down while I was looking at the BIOS version. This makes me realize, it is not caused by: HDD, Windows, Drivers or the Graphics card I cleared the CMOS again, updated the BIOS from F5 to F6f beta, but that did not help, it might even seem that the PC powers off even sooner. The shutdown even happened to me while I booted through a windows 7 installation USB and was in the repair console. I removed one of the cables powering the CPU, now only one 4pin cable powers it, and it worked for 30mins after doing that, which makes me think that it's the CPU overheating, and because it gets less power, it overheats slower? The things that I am still considering: CPU overheating (does not seem to overheat, maybe false readings?) Motherboard short circuiting (faulty motherboard?) I desperately need some advice in what is faulty, is it a faulty Motherboard or an overheating CPU? or maybe something else? I have been breaking my head over this problem over a span of 6 months. I'm not sure if this is a good place to ask this question, if it is not, then tell me where I can get some experienced help. More info I have also discovered a mysterious piece that seems to have fallen out of the motherboard i119.photobucket.com/albums/o126/yurikolovsky/strangepiece.jpg What is it? Looks like each time that it powers off the datetime gets reset I also found another forum post tomshardware.co.uk/forum/… except I don't have Integrated PeripheralsUSB Keyboard Function option in BIOS :S Comments summary (asked by Random moderator) Q. tell me, if the computer restarts, is it immediately? Does it take a second and then restarts? Do you see (BSOD) or hear (PSU, short circuit) any suspicious when it happens? After reading trough it, it remains the mainboard that is faulty. – JohannesM A. Immediate power off, all the fans stop instantly, all the light turn off instantly, no sound or anything, and it remains off until I turn it back on. Thanks for the feedback, faulty motherboard is what I fear. Q. Try stress-testing the system with Prime95 and see if errors or shutdowns occur when the CPU is under full load. – speakr A. Prime95 heat stress test peaked CPU heat at 60C after 5mins, it powered off after 30mins of testing in the middle of the test with no errors, Prime95 Heat test or the stress-testing with low RAM usage (small or in-place FFTs) do not report errors while testing for 10-60 mins. The power off does not seem like it is affected by Prime95 at all Makes me wonder if it's a CPU or Motherboard issue at all. Q. I had similar random/intermittent problems with my old board. It gave one of a few different symptoms: keyboard and/or mouse would die and/or the RAM wouldn't work and/or it would shut down. It was in bad shape. One problems was that my old PSU had literally burned the connector on it (browned around the pins), another was that a broken lead inside the layers of the PCB would work sometimes if it happened to be hot or if I bent the board—by jamming a hunk of wood behind it. I managed to keep the board alive for several years, but eventually nothing I did would make it work correctly anymore. – Synetech A. I will try that as the last resort, ok? ;) Q. Have you tried a different power cord, surge protector, outlet (on a different circuit). It's worth a shot just to ensure it's not subpar wiring or a week circuit (dips in power may cause shutdown if the PSU can't pull enough juice from the wall). – Kyle A. yes, I attached the PC to an entirely different outlet on a different circuit and the problem persists. After connecting it to a different outlet after starting the PC it gave me 3 long beeps and 1 short one, then the PC immediately proceeded to boot up normally. Q. Re-check your mainboard manual and all PSU connections to your mainboard to be sure that nothing is missing (e.g. 12V ATX 4-pin/6-pin connector). If you can provoke shutdowns with Prime95, then consider buying new hardware -- a stable system should run Prime95 for 24h without any errors. Prime95 mentions errors in the log when they occur and gives a summary after the stress test was stopped manually (e.g. "0 errors, 0 warnings", if all is fine) – speakr A. Re-checked, there are no more PSU connectors that I can physically connect, except the one ATX 4-pin (there are 2 that power the CPU) that I disconnected on purpose, I have reconnected it but the problem persists. Q. With one PC I had a short curcuit. The power button on the front plate had its cables soldered, but not isolated, and the contacts were very close to the metal case. A heavier touch was enough to cause a shutdown. The PC's vibration could be enough – ott-- A. yes, it seems to switch off with even the lightest touch, I switched on the PC, then pulled out the front panel power cable that connects to the motherboard so the power button does not work anymore, after 5 mins of working like that, with the power button completely disconnected, just sitting idle, the PC powered off again, I don't think it's the power button. Q. I wonder if you dare to operate components without the case, that is remove motherboard, power, disk ( just put the motherboard on a wooden desk). Don't bend the adapters when running like that. – ott-- A. yes, I do dare to do that, but only tomorrow, too tired/late right now.

    Read the article

  • limits.conf to set memory limits

    - by Rupert Jipe
    I would like to limit any process from using more than 500 MB of RAM. AFAIK this is done using RSS in /etc/security/limits.conf but the process called gnome-panel apparently is using 618436 kB of VmRSS. How can this be ? /etc/security/limits.conf * hard rss 512000 username@debian:~$ cat /proc/3002/status Name: gnome-panel State: S (sleeping) Tgid: 3002 Pid: 3002 PPid: 2910 TracerPid: 0 Uid: 1000 1000 1000 1000 Gid: 1000 1000 1000 1000 FDSize: 64 Groups: 20 24 25 29 44 46 112 116 117 1000 1002 1003 VmPeak: 916636 kB VmSize: 916636 kB VmLck: 0 kB VmHWM: 618436 kB VmRSS: 618436 kB VmData: 601972 kB VmStk: 104 kB VmExe: 516 kB VmLib: 29232 kB VmPTE: 1760 kB Threads: 1 SigQ: 0/14001 SigPnd: 0000000000000000 ShdPnd: 0000000000000000 SigBlk: 0000000000000000 SigIgn: 0000000020001000 SigCgt: 0000000180000000 CapInh: 0000000000000000 CapPrm: 0000000000000000 CapEff: 0000000000000000 CapBnd: ffffffffffffffff Cpus_allowed: 3 Cpus_allowed_list: 0-1 Mems_allowed: 00000000,00000001 Mems_allowed_list: 0 voluntary_ctxt_switches: 871965 nonvoluntary_ctxt_switches: 47553 PaX: PeMRs username@debian:~$ cat /proc/3002/limits Limit Soft Limit Hard Limit Units Max cpu time unlimited unlimited seconds Max file size unlimited unlimited bytes Max data size unlimited unlimited bytes Max stack size 8388608 unlimited bytes Max core file size 0 0 bytes Max resident set 524288000 524288000 bytes Max processes 100 100 processes Max open files 1024 1024 files Max locked memory 65536 65536 bytes Max address space unlimited unlimited bytes Max file locks unlimited unlimited locks Max pending signals 14001 14001 signals Max msgqueue size 819200 819200 bytes Max nice priority 0 0 Max realtime priority 0 0 Max realtime timeout unlimited unlimited us

    Read the article

  • Two Routers - 1 Port Straight to First Router

    - by apples
    At my house we have two Wifi routers one's connected directly to the modem and the other is plugged in down stairs as a second network(Directly connected to the first router) Is there a way that I could make it so that I have the second router have its own network, but have one or two ports that would act as if they were directly connected to the first router? That way I can port forward to devices on the second router. Here are the information about the routers: Router 1 - Linksys WRT54G Running stock firmware Router 2 - Linksys E900 Running Tomato Firmware So to summarize what I'm asking is how would I have two networks from two routers but be able to connect directly to the first router through one of the ports on the second router. Here's a Visio Drawing of what I would like to look like

    Read the article

  • What is a vim "runtime directory"?

    - by Andres Jaan Tack
    I'm trying to get started with things like FuzzyFinder, but I am stuck at the point where it says: INSTALLATION fuf-installation Put all files into your runtime directory. If you have the zip file, extract it to your runtime directory. You should place the files as follows: your_runtime_directory/plugin/fuf.vim ... What is my "runtime directory"? How do I know if I have one? Why does it matter how I put things into it?

    Read the article

  • How to force a resolution in linux?

    - by hi
    I have a HP LP3065 that requires a dual link dvi cable to go up to 2560x1600 resolution. However, I do not have that cable, but I want to use 1920x1200 resolution. However, my nVidia Display Settings (also system display settings) will only go up to 1280x1024, which looks horribly pixelated on the 30". How do I force the 1920x1200 resolution? I tried adding the mode into my xorg.conf file, but it still would not take it. I know my vid card can do 1920x1200 since it works on the 24" monitor with the same dvi cable. Here are my specs: Fedora 12 Nvidia Quadro NVS 420 Intel Xenon E5530 cpu 6gig memory Thanks

    Read the article

  • How to preserve paragraph breaks when text copy from PDF and paset ito Notepad?

    - by metal gear solid
    For example when I copy text from PDF which has paragraph breaks like this xxxxx xxxxxx xxxxxxx xxxxxx xxxxxx xxxxxxxx xxxxxx x xxxx xx xxxx xxxx xxxxxxxxxxx x xxxxxxxx x x xxxxxxxxxxxxxx xxxx xxx xxxx xxxxxx xxxxx xxxxxx xxxxxxx xxxxxx xxxxxx xxxxxxxx xxxxxx x xxxx xx xxxx xxxx xxxxxxxxxxx x xxxxxxxx x x xxxxxxxxxxxxxx xxxx xxx xxxx xxxxxx but when i copy text from PDF and paste into Notepad, Word 2007 etc. output comes without paragraph breaks. Lke this xxxxx xxxxxx xxxxxxx xxxxxx xxxxxx xxxxxxxx xxxxxx x xxxx xx xxxx xxxx xxxxxxxxxxx x xxxxxxxx x x xxxxxxxxxxxxxx xxxx xxx xxxx xxxxxx xxxxx xxxxxx xxxxxxx xxxxxx xxxxxx xxxxxxxx xxxxxx x xxxx xx xxxx xxxx xxxxxxxxxxx x xxxxxxxx x x xxxxxxxxxxxxxx xxxx xxx xxxx xxxxxx How to preserve paragraph breaks when text copy from PDF and paset ito Notepad?

    Read the article

  • microsoft office has stopped working

    - by Tomasusa
    Every time I try to run MS Word,Excel, PP, OneNote (2007), it crashes. I get: microsoft office has stopped working.. Safe mode also doesn't run. I have windows server 2008 (32bits) and MS products used to work some time before. How to fix it?

    Read the article

  • Computer wont POST after power outage

    - by aaron
    I had just turned my computer on and windows was loading when the power in my neighborhood went out. Normally, when I turn my computer on, the video card fan spins up, then slows down, POST and windows boots. Now, after the blackout, the video card fan spins fast and wont stop. Nothing is displayed on the monitor. The monitor does not detect that the video card is sending it signals, it just stays on standby. No POST or beep codes. This is what I have tried so far: My motherboard has 2 PCI express slots and I tried plugging the video card into both of them but that didn't fix anything. I have replaced the power supply, that didn't fix anything. I cleared the CMOS, that didn't fix anything. Does anyone have any idea of what could be wrong? Thanks!

    Read the article

  • Can't install any drivers at all on Windows 8. Error 0x000003F9

    - by ABarney
    I suddenly can't install any drivers at all on my Windows 8 Pro x64 install. It doesn't matter what kind of driver it is, nothing will install. Everything ends with error 0x000003F9: The system has attempted to load or restore a file into the registry, but the specified file is not in a registry file format. When Windows Update tries to install a driver, it just gives error code 800703F9 and says that "Windows Update ran into a problem." I've already done a scan of system files with sfc, tried another user account, done a chkdsk, and a few more things, but nothing works. The problem started when I tried to install drivers for my printer earlier today and suddenly started getting messages saying that "Windows Modules Installer has stopped working." I decided to restart and was being greeted with the recovery boot options. I shut the computer down, but when I booted it back up the same thing happened, so I did a repair your pc, and was able to boot into the OS properly. Then I rebooted into my external drive and did a chkdsk on the Windows 8 install that started acting funny. When I booted back into Windows 8, I wasn't able to install any drivers. They all keep coming up with the same error. And I can't seem to find anything at all on this issue. Any help would be much appreciated. Here's an install log from a failed driver install: >>> [Device Install (DiInstallDriver) - F:\Android\android-sdk\extras\google\usb_driver\android_winusb.inf] >>> Section start 2012/12/06 20:15:20.714 cmd: "F:\Windows\System32\InfDefaultInstall.exe" "F:\Android\android-sdk\extras\google\usb_driver\android_winusb.inf" inf: {SetupCopyOEMInf: F:\Android\android-sdk\extras\google\usb_driver\android_winusb.inf} 20:15:20.716 sto: {Import Driver Package: F:\Android\android-sdk\extras\google\usb_driver\android_winusb.inf} 20:15:20.719 sto: Driver Store = F:\Windows\System32\DriverStore [Online] (6.2.9200) sto: Driver Package = F:\Android\android-sdk\extras\google\usb_driver\android_winusb.inf sto: Architecture = amd64 sto: Flags = 0x00000000 inf: Provider = Google, Inc. inf: Class GUID = {3f966bd9-fa04-4ec5-991c-d326973b5128} inf: Driver Version = 08/27/2012,7.0.0.1 inf: Catalog File = androidwinusba64.cat inf: Version Flags = 0x00000011 ! sto: Unable to determine presence of driver package 'android_winusb.inf'. Error = 0x000003F9 flq: Copying 'F:\Android\android-sdk\extras\google\usb_driver\amd64\WdfCoInstaller01009.dll' to 'F:\Users\ALEXBA~1\AppData\Local\Temp\{5da5e23e-2f82-2b4f-b73d-9d77c2978b0e}\amd64\WdfCoInstaller01009.dll'. flq: Copying 'F:\Android\android-sdk\extras\google\usb_driver\amd64\WinUSBCoInstaller2.dll' to 'F:\Users\ALEXBA~1\AppData\Local\Temp\{5da5e23e-2f82-2b4f-b73d-9d77c2978b0e}\amd64\WinUSBCoInstaller2.dll'. flq: Copying 'F:\Android\android-sdk\extras\google\usb_driver\android_winusb.inf' to 'F:\Users\ALEXBA~1\AppData\Local\Temp\{5da5e23e-2f82-2b4f-b73d-9d77c2978b0e}\android_winusb.inf'. flq: Copying 'F:\Android\android-sdk\extras\google\usb_driver\androidwinusba64.cat' to 'F:\Users\ALEXBA~1\AppData\Local\Temp\{5da5e23e-2f82-2b4f-b73d-9d77c2978b0e}\androidwinusba64.cat'. pol: {Driver package policy check} 20:15:20.814 pol: {Driver package policy check - exit(0x00000000)} 20:15:20.814 sto: {Stage Driver Package: F:\Users\ALEXBA~1\AppData\Local\Temp\{5da5e23e-2f82-2b4f-b73d-9d77c2978b0e}\android_winusb.inf} 20:15:20.815 ! sto: Unable to determine presence of driver package 'android_winusb.inf'. Error = 0x000003F9 inf: {Query Configurability: F:\Users\ALEXBA~1\AppData\Local\Temp\{5da5e23e-2f82-2b4f-b73d-9d77c2978b0e}\android_winusb.inf} 20:15:20.820 inf: Driver package uses WDF. inf: Driver package 'android_winusb.inf' is configurable. inf: {Query Configurability: exit(0x00000000)} 20:15:20.823 flq: Copying 'F:\Users\ALEXBA~1\AppData\Local\Temp\{5da5e23e-2f82-2b4f-b73d-9d77c2978b0e}\amd64\WdfCoInstaller01009.dll' to 'F:\Windows\System32\DriverStore\Temp\{30801e6d-d30f-2f4b-87dc-c80122d5f248}\amd64\WdfCoInstaller01009.dll'. flq: Copying 'F:\Users\ALEXBA~1\AppData\Local\Temp\{5da5e23e-2f82-2b4f-b73d-9d77c2978b0e}\amd64\WinUSBCoInstaller2.dll' to 'F:\Windows\System32\DriverStore\Temp\{30801e6d-d30f-2f4b-87dc-c80122d5f248}\amd64\WinUSBCoInstaller2.dll'. flq: Copying 'F:\Users\ALEXBA~1\AppData\Local\Temp\{5da5e23e-2f82-2b4f-b73d-9d77c2978b0e}\android_winusb.inf' to 'F:\Windows\System32\DriverStore\Temp\{30801e6d-d30f-2f4b-87dc-c80122d5f248}\android_winusb.inf'. flq: Copying 'F:\Users\ALEXBA~1\AppData\Local\Temp\{5da5e23e-2f82-2b4f-b73d-9d77c2978b0e}\androidwinusba64.cat' to 'F:\Windows\System32\DriverStore\Temp\{30801e6d-d30f-2f4b-87dc-c80122d5f248}\androidwinusba64.cat'. sto: {DRIVERSTORE IMPORT VALIDATE} 20:15:20.875 sig: {_VERIFY_FILE_SIGNATURE} 20:15:20.881 sig: Key = android_winusb.inf sig: FilePath = F:\Windows\System32\DriverStore\Temp\{30801e6d-d30f-2f4b-87dc-c80122d5f248}\android_winusb.inf sig: Catalog = F:\Windows\System32\DriverStore\Temp\{30801e6d-d30f-2f4b-87dc-c80122d5f248}\androidwinusba64.cat ! sig: Verifying file against specific (valid) catalog failed! (0x800b0109) ! sig: Error 0x800b0109: A certificate chain processed, but terminated in a root certificate which is not trusted by the trust provider. sig: {_VERIFY_FILE_SIGNATURE exit(0x800b0109)} 20:15:20.893 sig: {_VERIFY_FILE_SIGNATURE} 20:15:20.893 sig: Key = android_winusb.inf sig: FilePath = F:\Windows\System32\DriverStore\Temp\{30801e6d-d30f-2f4b-87dc-c80122d5f248}\android_winusb.inf sig: Catalog = F:\Windows\System32\DriverStore\Temp\{30801e6d-d30f-2f4b-87dc-c80122d5f248}\androidwinusba64.cat sig: Success: File is signed in Authenticode(tm) catalog. sig: Error 0xe0000242: The publisher of an Authenticode(tm) signed catalog has not yet been established as trusted. sig: {_VERIFY_FILE_SIGNATURE exit(0xe0000242)} 20:15:20.907 ! sig: Driver package signer is unknown, but user trusts signer. sto: {DRIVERSTORE IMPORT VALIDATE: exit(0x00000000)} 20:15:22.701 sig: Signer Score = 0x0F000000 sig: Signer Name = Google Inc sto: {DRIVERSTORE IMPORT BEGIN} 20:15:22.702 sto: {DRIVERSTORE IMPORT BEGIN: exit(0x00000000)} 20:15:22.702 cpy: {Copy Directory: F:\Windows\System32\DriverStore\Temp\{30801e6d-d30f-2f4b-87dc-c80122d5f248}} 20:15:22.703 cpy: Target Path = F:\Windows\System32\DriverStore\FileRepository\android_winusb.inf_amd64_f7c4b212c9d862a3 cpy: {Copy Directory: F:\Windows\System32\DriverStore\Temp\{30801e6d-d30f-2f4b-87dc-c80122d5f248}\amd64} 20:15:22.704 cpy: Target Path = F:\Windows\System32\DriverStore\FileRepository\android_winusb.inf_amd64_f7c4b212c9d862a3\amd64 cpy: {Copy Directory: exit(0x00000000)} 20:15:22.705 cpy: {Copy Directory: exit(0x00000000)} 20:15:22.706 ! sto: Unable to determine if driver package 'android_winusb.inf' is already registered. Error = 0x000003F9 idb: {Register Driver Package: F:\Windows\System32\DriverStore\FileRepository\android_winusb.inf_amd64_f7c4b212c9d862a3\android_winusb.inf} 20:15:22.707 !!! idb: Failed to create driver package object 'android_winusb.inf_amd64_f7c4b212c9d862a3' in DRIVERS database node. Error = 0x000003F9 !!! idb: Failed to register driver package 'F:\Windows\System32\DriverStore\FileRepository\android_winusb.inf_amd64_f7c4b212c9d862a3\android_winusb.inf'. Error = 0x000003F9 idb: {Register Driver Package: exit(0x000003f9)} 20:15:22.709 sto: {DRIVERSTORE IMPORT END} 20:15:22.710 sto: {DRIVERSTORE IMPORT END: exit(0x000003f9)} 20:15:22.710 sto: Rolled back driver package import. !!! sto: Failed to import driver package into Driver Store. Error = 0x000003F9 sto: {Stage Driver Package: exit(0x000003f9)} 20:15:22.736 sto: {Import Driver Package: exit(0x000003f9)} 20:15:22.766

    Read the article

  • How to edit semi-plaintext file and maintaining character structure?

    - by Raul
    I am using a software (Groupmail from Infacta) that uses exact / absolute %PATHS% for saving some settings in specific semi-plaintext file. This is a really bad idea because you can't move to USER folder, or like my case it does not work after migrating to a new computer with different language. For example: C:\Documents and Settings\USER\Local Settings\Application Data\Infacta is different than C:\Documents and Settings\USER\Configuración local\Datos de programa\Infacta Obviously, the software does not work well. I tried to solve this using Find/Replace the new PATH with Notepad++. While the Groupmail software loads well and shows settings correctly, the software fails when trying to save data on that file. I guess this is because length or number of replaced characters is different and also it corrupt the file. Please could you help me to edit this file maintaining file integrity / structure?

    Read the article

  • ATI HDMI Audio disappears in Windows 7 when a TV is connected

    - by jsalonen
    So far I have unsuccessfully googled for HOURS with no luck fixing this very annoying problem. The settings is the following: I have PC running Windows 7 RC (64-bit) Video card is a ATI Radeon 4850 series card (Sapphire HD 4850 512MB to be exact) The video card has HDMI out with built-in audio chip I have an HDMI cable connecting the PC to a TV (Sony Bravia series) The problem is that when I connect the HDMI cable to the TV, the ATI HDMI Sound output device disappears completely from the list of playback devices in Windows. As a workaround I can restore the audio by re-installing the HDMI audio driver. However, when I disconnect the TV the driver disappears again. So basically, every time I want to watch stuff on my TV, I have to reinstall audio driver, which of course is VERY annoying. EDIT: I have figured out that I do not need to re-istall the HDMI audio driver to restore sound; I only need to reboot my computer with the HDMI cable plugged in to restore the audio driver. This suggests that the problem has something to do with information passed from TV to computer, which makes my HDMI Audio driver disappear. Are there any other, more elegant workarounds for this problem? All help is much appreciated!

    Read the article

< Previous Page | 480 481 482 483 484 485 486 487 488 489 490 491  | Next Page >