Search Results

Search found 14168 results on 567 pages for 'virtual hosting'.

Page 484/567 | < Previous Page | 480 481 482 483 484 485 486 487 488 489 490 491  | Next Page >

• Proftpd on Debian ignoring umask setting

  - by sodan

  I have found a solution for my problem. This is what I did: I added the following to my /etc/proftpd/proftpd.conf: <Limit SITE_CHMOD> DenyAll </Limit> I have the following problem: When I upload files to my FTP server the umask I set is totally ignored. All files have permissions 644. I use Debian 5.0.3 as operating system and proftpd 1.3.1 as ftp server. The user logging in is called mug and he is a local user (no virtual user). He is chrooted to the home directory /home/mug/ I tried the following things: 1. set umask setting in /etc/proftpd/proftpd.conf Umask 000 000 This should result in 777 for directories and 666 for files since directory umask is applied to 777 and file umask is applied to 666. After that I of course restarted the proftpd to be sure that the config is reloaded. 2. set umask for the user in /home/mug/.bashrc I added the following to the .bashrc for the user: umask 0000 After that I reloaded the .bashrc: source /home/mug/.bashrc I also checked the umask setting for the user by changing to the user and using this command: su mug umask As result I got a umask of 0000 prompted. So this worked. But still all my uploaded files are having 644 permissions set :( What am I doing wrong?

  Read the article

• ZFS: Mirror vs. RAID-Z

  - by John Clayton

  I'm planning on building a file server using OpenSolaris and ZFS that will provide two primary services - be an iSCSI target for XenServer virtual machines & be a general home file server. The hardware I'm looking at includes 2x 4-port SATA controllers, 2x small boot drives (one on each controller), and 4x big drives for storage. This allows one free port per controller for upgrading the array down the road. Where I'm a little confused is how to setup the storage drives. For performance, mirroring appears to be king. I'm having a hard time seeing what the benefit would be of using RAIDZ over mirroring would be. With this setup I can see two options - two mirrored pools in one stripe, or RAIDZ2. Both should protect against 2 drive failures, and/or one controller failure...the only benefit of RAIDZ2 would be that any 2 drives could fail. The storage should be 50% of capacity in both cases, but the first should have much better performance, right? The other thing I'm trying to wrap my mind around is the benefit of mirrored arrays with more than two devices. For data integrity what, if any, would be the benefit of a RAIDZ over a three-way mirror? Since ZFS maintains file integrity what does RAIDZ bring to the table...doesn't ZFS's integrity checks negate the value of RAIDZ's parity?

  Read the article

• WIM2VHD failing with "Cannot derive Volume GUID from mount point."

  - by Jacob

  I'm trying to use WIM2VHD according to the instructions on Scott Hanselman's blog post to create a Sysprepped VHD image to boot from. I've installed the WAIK, and I have my Windows 7 sources mounted as a virtual drive. When I try to run WIM2VHD like this: cscript WIM2VHD.wsf /wim:F:\sources\install.wim /sku:Ultimate /vhd:E:\WindowsSeven.vhd /size:30721 I get the following log: Log for WIM2VHD 6.1.7600.0 on 11/2/2009 at 10:51:18.16 Copyright (C) Microsoft Corporation. All rights reserved. MACHINE INFO: Build=7600 Platform=x86fre OS=Windows 7 Ultimate ServicePack= Version=6.1 BuildLab=win7_rtm BuildDate=090713-1255 Language=en-ZA INFO: Looking for IMAGEX.EXE... INFO: Looking for BCDBOOT.EXE... INFO: Looking for BCDEDIT.EXE... INFO: Looking for REG.EXE... INFO: Looking for DISKPART.EXE... INFO: Session key is E01E1ED7-C197-4814-BDE4-43B73E14FCC4 INFO: Inspecting the WIM... INFO: Configuring and formatting the VHD... ******************************************************************************* Error: 0: Cannot derive Volume GUID from mount point. ******************************************************************************* INFO: Unmounting the VHD due to error... WARNING: In order to help resolve the issue, temporary files have not been deleted. They are in: C:\Users\Jacob\AppData\Local\Temp\WIM2VHD.WSF\E01E1ED7-C197-4814-BDE4-43B73E14FCC4 *emphasized text*Summary: Errors: 1, Warnings: 1, Successes: 0 INFO: Done. Any ideas?

  Read the article

• What characteristic of networking/TCP causes linear relation between TCP activity and latency?

  - by DeLongey

  The core of this problem is that our application uses websockets for real-time interfaces. We are testing our app in a new environment but strangely we're noticing an increasing delay in TCP websocket packets associated with an increase in websocket activity. For example, if one websocket event occurs without any other activity in a 1-minute period, the response from the server is instantaneous. However, if we slowly increase client activity the latency in server response increases with a linear relationship (each packet will take more time to reach the client with more activity). For those wondering this is NOT app-related since our logs show that our server is running and responding to requests in under 100ms as desired. The delay starts once the server processes the request and creates the TCP packet and sends it to the client (and not the other way around). Architecture This new environment runs with a Virtual IP address and uses keepalived on a load balancer to balance the traffic between instances. Two boxes sit behind the balancer and all traffic runs through it. Our host provider manages the balancer and we do not have control over that part of the architecture. Theory Could this somehow be related to something buffering the packets in the new environment? Thanks for your help.

  Read the article

• Occasional "Could not load file or assembly" in asmx WebService on IIS and DFS

  - by jesse-mcdowell

  We have a handfull of ASMX web service hosted on two identical Windows Server 2003 boxes. The virtual directory for the web services is loaded in a DFS share, both servers point to the same share. We have a load balancer between the internet and the two web servers. At a seemingly random interval (right now about twice per week) when a user tries to access a method on the web service, IIS returns the error: "Could not load file or assembly" for one of the assemblies used in the method call, and will continue reporting it each time the method is called until the app pool is recycled. We haven't found any distinguishable pattern to the problem. This is what I know: the missing assembly varies (but it's always a home-brew assembly) the Web Service method that fails varies there is no noticeable pattern to the times or intervals where the problem appears there are no admin users accessing the servers when the problem appears the failing method will work correctly on one server and fail on the other, even though both point to the same bin folder the problem can always be corrected by recycling the app pool and making no other changes I have enabled the Assembly Binder Log, and know that the binder is looking in the correct location for the file. Our assemblies are compiled for .Net 3.5.

  Read the article

• Windows 32-bit and 64-bit and GPT

  - by MrLane

  I know similar questions have been asked before across several sites, but the answers at least to me have been confusing and conflicting. My understanding has always been that 64-bit Windows will create and use GPT disks just fine, but will not boot from them without a UEFI BIOS. Also my understanding WAS that 32-bit Windows could not use GPT at all and so is always restricted to 2.2TB disks, which was another reason to move to 64-bit on top of the 4GB memory limit. But I have now read that this isn't correct: 32-bit Windows will create and use GPT disks just as 64-bit does. The only resriction is that you can't boot 32-bit Windows even if you DO have a UEFI BIOS? I don't think much of the literature has explained this well. There are several tools floating around for creating virtual disks or 2.2+.8GB partition schemes and such for 32-bit systems. Why when it seems you can use GPT in 32-bit Windows anyway. It also seems that people blame MS for lagging behind with respect to all of this: but it seems the issue is with BIOS manufactures not supporting UEFI rather than MS not supporting GPT... Is my new understanding now correct?

  Read the article

• Mysql Fail to start

  - by John Naegle

  I'm running a Ubuntu 12.04 LTS Virtual Machine. Last week, the VM stopped unexpectedly now mysql will not start on the VM. These two events may be related, they may not be. When I try to connect: $ mysql ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) Then: $ sudo service mysql start start: Job failed to start And $ dmesg [ 1838.218400] type=1400 audit(1374633238.253:50): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=18473 comm="apparmor_parser" [ 1838.358656] init: mysql main process (18477) terminated with status 1 [ 1838.358695] init: mysql main process ended, respawning [ 1839.269303] init: mysql post-start process (18478) terminated with status 1 And $ service mysql status mysql stop/waiting I think this means mysql is crashing when it starts: $ sudo mysqld start 130723 21:51:24 InnoDB: Assertion failure in thread 3064211200 in file fut0lst.ic line 83 InnoDB: Failing assertion: addr.page == FIL_NULL || addr.boffset >= FIL_PAGE_DATA InnoDB: We intentionally generate a memory trap. InnoDB: Submit a detailed bug report to http://bugs.mysql.com. InnoDB: If you get repeated assertion failures or crashes, even InnoDB: immediately after the mysqld startup, there may be InnoDB: corruption in the InnoDB tablespace. Please refer to InnoDB: http://dev.mysql.com/doc/refman/5.5/en/forcing-innodb-recovery.html InnoDB: about forcing recovery. 02:51:24 UTC - mysqld got signal 6 ; Per the manual, I went to the data directory (/var/lib/mysql) and ran this: myisamchk --silent --force */*.MYI Then: $ sudo mysqld ... InnoDB: Your database may be corrupt or you may have copied the InnoDB InnoDB: tablespace but not the InnoDB log files. See InnoDB: http://dev.mysql.com/doc/refman/5.5/en/forcing-innodb-recovery.html InnoDB: for more information. ... Is my database corrupt? What can I do to recover? Re-install mysql? Something less drastic? I'm fine with losing the database, I just want a working system.

  Read the article

• Missing Home Folder XP Clients 2008R2 Domain

  - by minamhere

  We just completed a migration from Server 2003 to Server 2008R2. Everything seems to have gone well except that many of our desktops have stopped mapping the Home Folder as set in Active Directory. Other mappings that are defined on individual clients are mapping just fine, these mappings are all on the same file server as the failing Home Folders. Half of the users are on 1 file server and half are on another. Users from both servers are having this problem. I have enabled the Group Policy setting to "Wait for network before logging in". I enabled the policy to "Run Logon Scripts synchronously". There are no errors on the Domain Controller or either File Server. When I enabled Group Policy Preferences as an attempted workaround, I get this error: The user 'V:' preference item in the '<Policy Name>' Group Policy object did not apply because it failed with error code '0x800708ca This network connection does not exist.' This error was suppressed. This seems to indicate that the network connection is not ready by the time Group Policy is processed. But isn't this the point of the "Wait before logging in" and "Run Logon scripts synchronously" settings? Some other background facts: The new Server 2008R2 installation is a Virtual Machine. It is on a new Subnet in a different building from the old server. DNS and DHCP were also migrated from the old DC to this new DC. These Home Folders were all working properly before the migration. Are there new security restrictions/policies in Server 2008R2 that might be causing this? Is there a way to check whether I have an underlying network connectivity issue? Maybe moving the server to the new building is causing a delay/timeout? Any thoughts or ideas on what could be causing this or how I can resolve this? Thanks.

  Read the article

• IIS8 behind a VPN + Windows Server 2012 - how to properly bind IP+Port

  - by ryugen

  This is my first question so I hope I'm going to give you enough information. I'm running Windows Server 2012 within the Hyper-V environment of my Windows 8 machine. Within Windows Server 2012 I'm running a VPN tool based on openVPN to hide my real IP. When I run IIS8 with the VPN disconnected it works flawlessly through the Internet (port 80 forwarded correctly). But as soon as I connect to the VPN I can't reach my site through the domain anymore. Now I tried basically everything I know which is why I'm asking you guys. I tried binding IIS8 to the IP of my virtual ethernet card. I tried changing the priority of the NIC through the "Network and sharing center" via the advanced tab. I used ipconfig /flushdns in case there was something wrong in the DNS handling. Hell, I even turned off the Windows firewall. I also used a port scanner to verify the problem. The webserver is reachable on port 80 with VPN disconnected and immediately gets unreachable on connect. Theoretically both IPs (my regular one AND the VPN) should be reachable or at least not impair the other one right? Do you have any other suggestion? Do I have to route something somewhere somehow?

  Read the article

• Getting Server 2008 R2 to ignore all traffic from Internet-facing NIC, leaving it to a VM

  - by Wolvenmoon

  I got in to Server 2008 R2 via Dreamspark and would like to start learning on it. I don't have much option but to put it on a system sitting between the Internet and my home LAN due to electricity bills and the fact that 3 computers in an 11x11 space in 102 degree weather is pretty stygian. Currently I use a ClearOS gateway to manage everything, what I'd like to do is take my server 2008 R2 box, which has two NICs, and drop it at the head of my network. I'd want Server 2008 R2 to ignore all traffic on the external facing NIC and pass it to a virtual ClearOS gateway, and to put all its Internet traffic through its other NIC - which will face the rest of my network and be the default gateway for it. The theory is to keep the potentially vulnerable Server 2008 R2 install as tucked behind a Linux box as possible, without sacrificing too much performance. This is a home network that occasionally hosts dedicated game servers and voice chat servers, so most malicious activity is in the form of drive by non-targeted attacks, however, I don't trust Windows Server because I don't know the OS well enough, yet. So, three questions: How do I do this, am I going to be reasonably more secure doing this than if I just let the Server 2008 R2 rig handle all the network traffic and DHCP (not an option), and should I virtualize the Server 2008 R2 rig instead and if so in what? (Core 2 Duo e6600 w/ 5 gigs usable RAM)

  Read the article

• Splitting Servers into Two Groups

  - by Matt Hanson

  At our organization, we're looking at implementing some sort of informal internal policy for server maintenance. What we're looking at doing is completing maintenance on our entire server pool every two months; each month we'll do half of the servers. What I'm trying to figure out is some way to split the servers into the two groups. Our naming convention isn't much to be desired (but getting better) so by name or number doesn't really work. I can easily take a list of all the servers and split them in two, but with new servers are being added constantly, and old ones retired, that list would be a headache to maintain. I'd like to look at any given server and know if it should have its maintenance done this month or next. For example, it would be nice to look at the serial number. If it started with an even number, then it gets maintenance done on even months and vice-versa. This example won't work though as a little over half of the servers are virtual. Any ideas?

  Read the article

• Convert raw IMAP server data into local folders, then upload partial dataset to new IMAP server?

  - by Manca Weeks

  I am transitioning a company with about 30 IMAP accounts, loaded with data (about 77GB total), to a new email host. The majority of the data will be converted into a local archive and distributed to the company computers as a static reference data set. The server side folders the users absolutely cannot do without being on the server will be uploaded back to the new server. I used Mac OS X Mail (Snow Leopard 10.6.6) to download the content. I notice some messages have the name [xxx].partial.emlx, which leads me to believe they have not been downloaded all the way. I have root access to the mail server data and could download the IMAP server data via FTP. I am not sure what utility to use to convert that data to local Mail.app mailboxes. Furthermore, I would appreciate any input on the best way to upload a portion of the data to the new server (GoDaddy), preserving the original dates of the messages. edit OK - forget the raw server data. I found a script that apparently does pretty good archiving IMAP folders to local mbx files. My main quest now is to batch upload a mailbox hierarchy to the new IMAP server without having to start-stop and deal with similar issues. Anyone know of a utility (hopefully for OS X, but if not, I'll fire up my XP virtual system...) that would be capable of this? Thanks, M

  Read the article

• Apache/Passenger and cpulimit

  - by Dave Smylie

  I run a ruby on rails site that processes email - the email is dumped directly into the web app via a POST from postfix. At times I can get a burst of email coming in causing a prolonged surge in CPU usage making my VPS provider understandable unhappy with me. These emails don't need to be processed in a timely manner - they just need to be (eventually) processed. Obviously I can't just nice the process as that only looks at the cpu usage on my VPS and can't take into account the cpu usage on the other VPS's. I have found a utility called cpulimit that will you put hard limits on cpu usage for a particular process. (eg 20%). This seems ideal for this purpose, but I can't work out to integrate with apache/passenger. Passenger starts up a ruby process for each server and restarts them periodically. Each time the pid will change. Cpulimit needs to be given a pid number for it to act on. Anyone got any ideas how I could get passenger to fire off a call this command when it's starting up this particular virtual host?

  Read the article

• 613 threads limit on debian

  - by Joel

  When running this program thread-limit.c on my dedicated debian server, the output says that my system can't create more than around 600 threads. I need to create more threads, and fix my system misconfiguration. Here are a few informations about my dedicated server: de801:/# uname -a Linux de801.ispfr.net 2.6.18-028stab085.5 #1 SMP Thu Apr 14 15:06:33 MSD 2011 x86_64 GNU/Linux de801:/# java -version java version "1.6.0_26" Java(TM) SE Runtime Environment (build 1.6.0_26-b03) Java HotSpot(TM) 64-Bit Server VM (build 20.1-b02, mixed mode) de801:/# ldd $(which java) linux-vdso.so.1 => (0x00007fffbc3fd000) libpthread.so.0 => /lib/libpthread.so.0 (0x00002af013225000) libjli.so => /usr/lib/jvm/java-6-sun-1.6.0.26/jre/bin/../lib/amd64/jli/libjli.so (0x00002af013441000) libdl.so.2 => /lib/libdl.so.2 (0x00002af01354b000) libc.so.6 => /lib/libc.so.6 (0x00002af013750000) /lib64/ld-linux-x86-64.so.2 (0x00002af013008000) de801:/# cat /proc/sys/kernel/threads-max 1589248 de801:/# ulimit -a core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 794624 max locked memory (kbytes, -l) 32 max memory size (kbytes, -m) unlimited open files (-n) 10240 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) 128 cpu time (seconds, -t) unlimited max user processes (-u) unlimited virtual memory (kbytes, -v) unlimited file locks (-x) unlimited Here is the output of the C program de801:/test# ./thread-limit Creating threads ... Address of c = 1061520 KB Address of c = 1081300 KB Address of c = 1080904 KB Address of c = 1081168 KB Address of c = 1080508 KB Address of c = 1080640 KB Address of c = 1081432 KB Address of c = 1081036 KB Address of c = 1080772 KB 100 threads so far ... 200 threads so far ... 300 threads so far ... 400 threads so far ... 500 threads so far ... 600 threads so far ... Failed with return code 12 creating thread 637. Any ideas how to fix this please ?

  Read the article

• Windows Remote Desktop (RDP/MSTSC) fails with Error Code: 5

  - by BryCoBat

  I have 2 Windows XP boxen: A (running XP SP3) and B (running XP SP2). I'm using Remote Desktop to connect from A to B. When I connect, I get the login screen (which is slow to respond to keyboard/mouse input), and after logging in, I get the following: Fatal Error (Error Code: 5) Your Remote Desktop session is about to end. This computer might be low on virtual memory. Close your other programs, and then try connecting to the remote computer again. If the problem continues, contact your network administrator or technical support. I've seen one way to (sometimes) get in by opening a second RDP session to the same box [1], and if I wait long enough sometimes it will go ahead and log in anyway. Is there something broken/missing on the PC I'm trying to remote in to? Edited in reply to djangofan: There's nobody listed under "Lock pages in memory". When the double login trick works, a glance at Task Manager shows plenty of free memory, 800MB available out of 1.5 GB. (Performance tab, Physical memory) For what it's worth, this happens consistently after a reboot. What sort of exact info would be useful? There's very little remaining installed on that machine that's not Windows + Office... [1] found at http://www.fdcservers.net/vbulletin/archive/index.php/t-1580.html

  Read the article

• Does Hyper-V support SCSI Pass-through discs in a Server 2003 R2 VM?

  - by Peter Bernier

  I'm running into some difficulties getting pass-through disks to be accessible to a Hyper-v server 2003 r2 virtual machine. Host OS : Server 2008 R2 full w/Hyper-V role Guest OS : Server 2003 R2 (Windows Home Server) The guest's OS disk is a pass-through disk on the IDE controller (not the best solution, but I can live with it). My storage disks will be pass-through disks on the SCSI controller. I'm able to see all of the disks that I'll be using for the VM on the host without issue. The problem that I'm having is that I can't seem to get the guest OS to be able to 'see' the storage drives (as pass-through disks on the SCSI controller). Here's what I'm doing : On the host, the storage drive is set to 'Offline' just like the OS disk (this is required for pass-through to work). In the VM, the storage drive is on the SCSI controller. Hyper-V Integration Tools are installed in guest. That's as far as I'm able to get. I don't see the drive in Computer Management, or in Windows Explorer (I've tried with an unformatted disk, as well as after formatting a partition). I am able to see a removable device that lists the disk's model number in the Guest, but I can't seem to access the storage. (I get an entry in Device Manager that needs drivers, but nothing on the Integration Tools disc works..) Trouble-shooting steps I've tried : If put the pass-through drive on the IDE controller, I can see it in the Guest. If put the storage drive 'Online' in the host and create a VHD on it on the SCSI controller, I can see it in the Guest. I suppose I could create a fixed-size VHD that consumes the entire disk, but I'd rather not have that overhead. I've also extracted the contents of the Integration Tools drivers (x86 and amd64) and tried pointing the disk controller to each of those, with no luck. Can anyone offer suggestions as to how I can get this to work properly?

  Read the article

• Nexus 1000v VEM fails on 2 out of 8 hosts.

  - by cougar694u

  I have 8 ESXi hosts. I do a fresh install from the installable CD directly to 4u1. We have another 2-node cluster with a working Nexus 1000v primary & secondary. Everything's up and running. I installed 6 hosts and everything worked great, migrated them to the Nexus DVS, and VUM installed the modules. I did the 7th host, and when I tried to migrate it to the DVS, it failed with the following error: Cannot complete a Distributed Virtual Switch operation for one or more host memebers. DVS Operation failed on host , error durring the configuration of the host: create dvswitch failed with the following error message: SysinfoException: Node (VSI_NODE_net_create) ; Status(bad0003)= Not found ; Message = Instance(0): Inpute(3) DvsPortset-0 256 cisco_nexus_1000v got (vim.fault.PlatformConfigFault) exception Then, I tried to do host 8, and got the exact same problem. It worked about 15 minutes prior when I did host 6, nothing changed, then went to host 7 and it failed. If I try to remediate either of these two hosts, either patches or extensions, it fails. Anyone else have these problems?

  Read the article

• Changing MX records in named zone file

  - by Paul England

  I forgot how all this works. I have a GoDaddy account, using my own DNS and whatnot. I'm having trouble getting my email to work. They said I need to update my MX records. basically, I have the following. 184.168.30.42 is the domain's IP address, obviously. gamengai.com. 14400 IN NS n1 gamengai.com. 14400 IN NS n2 ns1 14400 IN A 184.168.30.42 ns2 14400 IN A 184.168.30.42 gamengai.com. 14400 IN A 184.168.30.42 localhost 14400 IN A 127.0.0.1 ftp 14400 IN A 184.168.30.42 www 14400 IN A 184.168.30.42 mail 14400 IN A 184.168.30.42 subdomain 14400 IN A 184.168.30.42 gamengai.com 14400 IN MX 10 mail Mail doesn't work though... they say to make the following change: 0 smtp.secureserver.net 10 mailstore1.secureserver.net So should the last line point to mailstore1.secureserver.net instead of mail in the last field? What about the other line? I had this working at one time, but it's totally gotten away from me. It's a virtual dedicated server and their support for this stuff is pretty bad... almost as bad as my admin skills since I went the programmer route.

  Read the article

• Sync desktop Mac environment to laptop

  - by Andrew Vit

  I spend the majority of my time working at my desktop Mac, which I have configured for my web development environment. My spouse has a MacBook for casual use, and I occasionally steal it back when I need to work off-site, or when travelling. The question is how to best synchronize the two so I can switch between them more readily. I've solved a few obvious things by using online services: Email is hosted on IMAP. Working files are in Dropbox. Source code is managed in git. However, the following are things I always miss when jumping on the laptop: Installed Applications (current versions) Installed libraries & utilities (/usr/local) Apache VirtualHosts & other configurations (/etc) Disk image files for VMs My current method is to connect the MacBook via Firewire target mode and rsync the /Users/me home directory, and then cherry-pick the other items I need from Applications, /etc and /usr/local. The problem with this method is that it can be very time consuming due to things like my virtual machine image files, cached emails, etc. How can I make this faster & easier? Can you recommend a solution for configuration management (so I can repeatably install & configure the same software on both), or synchronization (so I can bring the MacBook up to date nightly, over our home network)?

  Read the article

• auth.log is empty (Ubuntu)

  - by Vinicius Pinto

  The /var/log/auth.log file in my Ubuntu 9.04 is empty. syslogd is running and /etc/syslog.conf content is as follows. Any help? Thanks. # /etc/syslog.conf Configuration file for syslogd. # # For more information see syslog.conf(5) # manpage. # # First some standard logfiles. Log by facility. # auth,authpriv.* /var/log/auth.log *.*;auth,authpriv.none -/var/log/syslog #cron.* /var/log/cron.log daemon.* -/var/log/daemon.log kern.* -/var/log/kern.log lpr.* -/var/log/lpr.log mail.* -/var/log/mail.log user.* -/var/log/user.log # # Logging for the mail system. Split it up so that # it is easy to write scripts to parse these files. # mail.info -/var/log/mail.info mail.warning -/var/log/mail.warn mail.err /var/log/mail.err # Logging for INN news system # news.crit /var/log/news/news.crit news.err /var/log/news/news.err news.notice -/var/log/news/news.notice # # Some `catch-all' logfiles. # *.=debug;\ auth,authpriv.none;\ news.none;mail.none -/var/log/debug *.=info;*.=notice;*.=warning;\ auth,authpriv.none;\ cron,daemon.none;\ mail,news.none -/var/log/messages # # Emergencies are sent to everybody logged in. # *.emerg * # # I like to have messages displayed on the console, but only on a virtual # console I usually leave idle. # #daemon,mail.*;\ # news.=crit;news.=err;news.=notice;\ # *.=debug;*.=info;\ # *.=notice;*.=warning /dev/tty8 # The named pipe /dev/xconsole is for the `xconsole' utility. To use it, # you must invoke `xconsole' with the `-file' option: # # $ xconsole -file /dev/xconsole [...] # # NOTE: adjust the list below, or you'll go crazy if you have a reasonably # busy site.. # daemon.*;mail.*;\ news.err;\ *.=debug;*.=info;\ *.=notice;*.=warning |/dev/xconsole

  Read the article

• Troubleshooting wireless connection problem / site survey?

  - by johnnyb10

  I just started in the IT department of a small company (200 users) and it's clear that one of the main problems that is driving everyone crazy is the spotty nature of the wireless connectivity throughout the office, particularly in certain conference rooms. This is a huge problem because the connection often drops during important presentations to clients. I was hired to help ease the load on the existing IT admin, who has done a great job, but is overloaded with many other tasks to deal with. So I would like to try to help out with this wireless issue. I am looking for advice on the best way to solve this problem--a realistic troubleshooting methodology that does not require me to spend any money. So far, I've experimented with Ekahau Heat Mapper, which is free and helps create a site survey. But I'm not exactly sure what I'm looking for or if there are other programs/tools/methods I should try as well. Any advice would be greatly appreciated. [Some background: The wireless setup consists of an HP ProCurve Mobility MSM (710?) controller that controls 10 access points throughout the building. There are three virtual wireless networks configured on the controller: one seems to be a default that cannot be changed, one is for internal employees and authenticates via Active Directory, and the third is a guest network for visitors. When I use HeatMapper, these show up as three different SSIDs, with different MAC addresses, all on the same channel. At first I thought maybe this would cause interference, but this seems to be the way the controller works;apparently, it automatically configures the channels to avoid interference from the other APs on the network.]

  Read the article

• How can I password protect & let cgi-bin to work?

  - by jaaaaaaax

  This is taken from sites-available directory. It's a virtual host setting for apache. Accessing myiphere/cgi-bin/ throws 403. The directory setting for /var/www2/ drwxrwxrwx 8 www-data www-data NameVirtualHost myiphere <VirtualHost myiphere> ServerAdmin webmaster@localhost DocumentRoot /var/www2/ <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www2/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined ServerSignature On Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory>

  Read the article

• Cannot connect on TFS 2012 server through SSL with invalid certificate

  - by DaveWut

  I saw the problem on some forums and even here, but not as specific as mine. So here's the thing, So I've configured a TFS 2012 server, on one of my personnel server at home, and now, I'm trying to make it available through the internet, with the help of apache2 on a different UNIX based, physical server. The thing is working perfectly, I don't have any problem accessing the address https://tfs.something.com/tfs through my browser. The address can be pinged and I do have access to the TFS control panel through it. How does it work? Well, with apache2 you can set a virtual host and set up the ProxyPass and ProxyPassReserver setting, so the traffic can externally comes from a secure SSL connection, through a specified domain or sub-domain, but it can be locally redirect on a clear http session on a different port. This is my current setup. As I already said, I can access the web interface, but when I'm trying to connect with Visual Studio 2012, it can't be done. Here's the error I receive: http://i.imgur.com/TLQIn.png The technical information tells me: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. My SSL certificate is invalid and was automatically generated on my UNIX server. Even if I try to add it in the Trusted Root Certification Authorities either on my TFS server or on my local workstation, it doesn't work. I still receive the same error. Is there's a way to completely ignore certificate validation? If not, what's have I done? I mean, I've added the certificate in the trusted root certificates, it should works as mentioned on some forums... If you need more information, please ask me, I'll be pleased to provide you more. Dave

  Read the article

• Reinserted a RAID disk. Defined as foreign. Is import or clear the correct choice?

  - by Petrus

  I have re-inserted a RAID disk, on a DELL server with Windows Server 2008. The drive-status indicator was changing between a green and amber light, and the monitor gave the following message: There are offline or missing virtual drives with preserved cache. Please check the cables and ensure that all drives are present. Press any key to enter the configuration utility. I pressed a key and the PERC 6/I Integrated BIOS Configuration Utility showed that the RAID Status for that disk was Offline. After reinsertion of the disk the monitor is giving the following message: Foreign configuration(s) found on adapter. Press any key to continue or ‘C’ load the configuration utility, or press ‘F’ to import foreign configuration(s) and continue. After checking around on the net I am uncertain if I should choose import or clear. I cannot find out if an import means importing information from the array/system to the now foreign disk or the other way, i.e. importing information from the foreign disk to the array/system that was actually working fine. Also; if clear is a necessary thing to do ahead of a rebuild of that disk, or if clear means to clear the system to somehow make it ready to import the information from the foreign disk to the array/system, which is not what I want. I imagine that making the wrong choice here might be fatal. Please help clearing this out by telling what to choose and why.

  Read the article

• How to add another application to apache?

  - by Jader Dias

  I was following the Zabbix installation tutorial for Ubuntu and it requested that I added a file /etc/apache2/sites-enabled/000-default containing Alias /zabbix /home/zabbix/public_html/ <Directory /home/zabbix/public_html> AllowOverride FileInfo AuthConfig Limit Indexes Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec <Limit GET POST OPTIONS PROPFIND> Order allow,deny Allow from all </Limit> <LimitExcept GET POST OPTIONS PROPFIND> Order deny,allow Deny from all </LimitExcept> </Directory> But I already have /etc/apache2/sites-enabled/railsapp NameVirtualHost *:80 NameVirtualHost *:443 <VirtualHost *:80> UseCanonicalName Off Include /etc/apache2/conf/railsapp.conf </VirtualHost> <VirtualHost *:443> SSLEngine on SSLCertificateFile /etc/ssl/certs/cert.pem Include /etc/apache2/conf/railsapp.conf RequestHeader set X_FORWARDED_PROTO 'https' </VirtualHost> and /etc/apache2/sites-enabled/mercurial NameVirtualHost *:8080 <VirtualHost *:8080> UseCanonicalName Off ServerAdmin webmaster@localhost AddHandler cgi-script .cgi ScriptAliasMatch ^(.*) /usr/lib/cgi-bin/hgwebdir.cgi/$1 </VirtualHost> I think that it is because of the already existing virtual hosts that my I can't access the zabbix page. How to circumvent this?

  Read the article

< Previous Page | 480 481 482 483 484 485 486 487 488 489 490 491  | Next Page >