Search Results

Search found 30127 results on 1206 pages for 'home network'.

Page 485/1206 | < Previous Page | 481 482 483 484 485 486 487 488 489 490 491 492  | Next Page >

• Unable to ping between subnets and out to internet

  - by battlemidget

  My setup is Modem - Linksys router - Laptop with 2 devices (wlan0/eth0) - desktop machine Router is 192.168.1.1 gateway to the internet Laptop wlan0 is 192.168.1.4 with a gw of 192.168.1.1 Laptop eth0 is 192.168.2.254 which acts as a second gateway desktop is 192.168.2.100 On laptop i've setup ip_forward to 1, and have inserted 2 iptables rules -A FORWARD -i eth0 -o wlan0 -j ACCEPT -A FORWARD -i wlan0 -o eth0 -j ACCEPT The laptop can ping outside the network (i,e, yahoo.com) it can not ping 192.168.2.100. The desktop can ping 192.168.2.254 but nothing outside the network or 192.168.1.0 subnet. On laptop ip route show lists: 192.168.2.0/24 dev eth0 proto kernel scope link src 192.168.2.254 192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.4 127.0.0.0/8 dev lo scope link default via 192.168.1.1 dev wlan0 What am I missing to make my desktop go through the laptop in order to access the router which provides access to the internet? Thanks

  Read the article

• Taking user out of MACHINENAME\Users group does not disallow them from authenticating with IIS site

  - by jayrdub

  I have a site that has anonymous access disabled and uses only IIS basic authentication. The site's home directory only has the MACHINENAME\Users group with permissions. I have one user that I don't want to be able to log-in to this site, so I thought all I would need to do is take that user out of the Users group, but doing so still allows him to authenticate. I know it is the Users group that is allowing authentication because if I remove that group's permissions on the directory, he is not allowed to log in. Is there something special about the Users group that makes it so you are actually always a part of it? Is the only solution to revoke the Users group's permissions on the site's home directory and grant a new group access that contains only the allowed users?

  Read the article

• Can't get utouch to show available wifi networks

  - by kellrobinson

  I have ubuntu touch installed on a 2014 Nexus 7. Swiping down from the wireless symbol reveals a "Network" menu with the choices Flight Mode, Wifi Settings, and Cellular Settings. Wifi Settings leads to another menu: Previous Networks, and Other Networks. Previous Networks shows a list of networks used in the past; Other Networks opens an empty box for typing in the name of a network. I don't see any way to show a list of available networks detected by the device. On rare occasions, swiping down the wireless symbol actually does bring up a list of detected networks. But most of the time ubuntu touch exhibits the behavior described above, with no apparent way to bring up the list of available wireless networks. I would like to see a list of the availble networks, if there is a way to do so. Edit: The wifi menu works properly now. Just needed a couple of reboots, it seems. I have other problems, though. If these other problems persist I will make a post specific to them. This device is a 2013 Nexus 7 4G. Not sure how to find the ubuntu version. Can't navigate the settings menu right now because it got stuck and there's no way to go back, except to reboot(!) I'll open multirom manager or boot into recovery and look for the information there.

  Read the article

• SQL ERROR: Verify that the instance name is correct and that SQL Server is configured to allow remote connections?

  - by scepak

  I am getting following error while connecting to my local Sql Express. An error has occurred. Details of the exception: A network-related or instance-specific error occurred while establishing a conne ction to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Serve r/Instance Specified) Unable to connect to SQL Server database. I am able to connect to Sql Server using Management Studio.

  Read the article

• Cannot schedule task for domain user account

  - by Filburt

  On our Win 2008 machines I can't schedule tasks for domain users because the domain name does not resolve to network name but the AD dc name. The "network name" looks like ABCDEFGE-HIJKLM and the "dc" / "name" would look like ABCDEFGE-HIJKLMN. When selecting the domain user account the account qualifier will look like ABCDEFGE-HIJKLMN\task.user. This results in an "invalid account" error. When however keeping the currently logged in user it will display ABCDEFGE-HIJKLM\current.user. Does this behaviour result from the presumable "illegal" domain name? Is there a workaround for this?

  Read the article

• I need to make Windows 7 STOP disabling the wifi adapter when the wired LAN is connected

  - by Escobar Ceaser

  This is a Dell Latitude E6430. There is a setting in the bios to control this behavior and I have DISABLED it but it still happens. I am also running the latest bios. When I plug in a network cable the wifi adapter becomes disabled. I need it to stay enabled. What else could be making this happen? EDIT: The reason I need to do this is because with NETSH WLAN commands you can create a wifi hotspot by sharing the internet connection on the wired adapter and broadcasting a ssid on the virtual wifi nic. I do this all the time but it's not working on this laptop. I'm wondering if it's a network security thing where I am. I'm going to try from my hotel tonight and report back.

  Read the article

• How do I make a Live USB without destroying my Windows computer?

  - by user71089

  Unlike every other post I have read, let me begin by saying that I am TERRIFIED of destroying my Windows 7 home system in the attempt of making a bootable Ubuntu Thumb Drive. I very specifically DO NOT want to attempt configuring a dual boot system. What I am seeking is a portable operating system on a thumb drive, through which I can run my COREL software via VirtualBox-4.1.16-78094-Win. I want to be able to use my own software on my work computer without any worries about screwing up the host system anywhere I go. Supposedly, I just made a bootable Thumb drive, having successfully loaded the ISO for ubuntu-12.04-desktop-i386 using Pendrivelinux's Universal-USB-Installer-1.9.0.1 However, all that I get is a Thumb Drive that wants to install Unbutu onto my PC's HDD. I am not finding any clear path to this end in the posts I am reading. Like it or not, Windows is a fact of life for me. The goal is to be able to use my software on my work PC without doing anything intrusive that will cost me my job. If I have a meltdown on my PC at home trying to make this happen, it will be nearly as bad. Is this even Do-Able? Can the process be made clear? Thank You, Ubuntu World ...!

  Read the article

• Block Websites at Work

  - by user791022

  At work there are about 40 PCs. I want to block all the websites and only allow a few Domains/Websites for operators. A few operators can access anything. I want something quick and easy so I can filter the Block/Allow websites for all computers from one main computer, like a server or something. Windows Vista Home and Windows 7 Home are installed on the PCs. Is there any software can do this? PS: Please don't answer about Microsoft Windows Server OS..

  Read the article

• Manually forcing TCP connection to retry

  - by Vi

  I have a TCP connection (SSH session to some computer for example) Network suddenly goes down and drops all packets (disconnected cable, out of range). TCP resends packets again and again, retrying with increasing delays. I see the problem and plug the cable back (or restore network somehow). TCP connection finally successfully resends some packet and continues. The problem is that I need to wait for a some timeout on point 5. I want to use my opened SSH session now and not wait for 5-10 seconds until it finds out that connection is working again. How to force all TCP connections to resend data without now in GNU/Linux?

  Read the article

• local wordpress installation not accessible from the outside world

  - by hello

  I have a working installation of wordpress located in /var/www/html/wordpress It is accessible in my local network at [local-machine-ip]/wordpress/ There is also a test page located in /var/www/html/test.html It is also accessible in my local network at [local-machine-ip] I would like the wordpress website to be accessible from the outside world. I know that my ISP blocks incoming requests on port 80, so I set my router to redirect requests from port 8080 to 80. This feature appears to be working correctly since I can access the test.html page using my public ip address as follows: [public-ip]:8080 However, I cannot access [public-ip]:8080/wordpress Here is my Apache config : <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /var/www/html ServerName [my.domain.com] <Directory /var/www/html/> Options FollowSymLinks Indexes MultiViews AllowOverride All Order allow,deny allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost> Thanks!

  Read the article

• DNS issues on my iPhone

  - by mattalexx

  I'm trying to call up "https://m.google.com" on my iPhone on my home WiFi. It's saying Safari "cannot verify server identity" of m.google.com, then when I press Details, it refers to https://m.google.com as "mattserver". "mattserver" is the name of my development server, a Linux box on my home network. This stinks of DNS issues to me. Accessing the unsecure version of that URL ("http://m.google.com") gives me a blank page. What could be going on here? Is there a way to look at the logs of my router somehow?

  Read the article

• Does anyone know of a inexpensive NAT router that has the ability to limit access to the Internet to

  - by Corey

  Does anyone know of a inexpensive NAT router that has the ability to limit access to the Internet to a specific MAC address? I know the Linksys routers have a MAC filtering feature, but it is the opposite of what I need. It allows you to block access to a specific MAC address. I need something that will block all, but allow an exception. I'm dealing with some VOIP issues in my company's network, and I think the answer is to have a separate router on the network for my PBX to use. I want to make sure that other nodes are not allowed to access the Internet via this second router.

  Read the article

• Comparison in Monit Permissions Testing

  - by beanland

  I'm trying to use Monit to check the permissions of a particular directory, but I only care that it's readable to all users. I don't care about any other permissions (write, execute) for the owner, group, or all. I also don't care about any special permissions. Knowing that I can't change the permissions of this directory, and with the possibility of another administrator changing these permissions without affecting my processes that rely on this directory (i.e., granting or revoking write access to the group), is it possible to check for a minimum permission in Monit? I have this which is currently working: check directory archive path /var/home/archive/ if failed perm 0755 then alert But I would like to have something like tihs: check directory archive path /var/home/archive/ if failed perm > 444 then alert This is failing for me. Is it possible to use comparison operators in Monit's permissions checking? If not, are there any workarounds?

  Read the article

• merging two partitions on ubuntu

  - by gthm geeky

  This is how my partitions look like in Ubuntu. I would like to merge two partitions /dev/sda8 and /dev/sda/7 because I am unable to use both of them. /dev/sda8 111G 2.7G 103G 3% / udev 1.9G 12K 1.9G 1% /dev tmpfs 763M 864K 762M 1% /run none 5.0M 0 5.0M 0% /run/lock none 1.9G 252K 1.9G 1% /run/shm none 100M 72K 100M 1% /run/user /dev/sda7 117G 52M 111G 1% /home Please let me know if there is any way to do it. And all the partitions looks ugly..I would like to have only one partition which would be my home folder.

  Read the article

• Cannot connect to Internet via Wifi

  - by lvogel

  I have a laptop that's currently configured as a dual-boot. The problem: I cannot connect to the Internet in the home wireless network through Ubuntu in the apartment where I currently live. The strange part: I can connect to it just fine through Windows (as right now), and I can use the Internet through Ubuntu on this computer with all the other wireless networks I have tried. The problem is only with this particular combination. The only possible explanations I can think of are either that this network is WPS, or that it's a driver problem--Vodafone router. The router 'sees' the computer--and it says it's connected; however, I keep getting prompted for a password, and I enter the key that works with Windows, but in Ubuntu it just keeps asking for it repeatedly, and I can't access the Internet. I don't have an ethernet cable at the moment, but if someone would be so kind as to ask me questions I will gladly answer, and if you have suggestions, I will do them--the only thing is, I am subletting this apartment from someone who is away on vacation, so I don't want to screw with the router settings unless I know what I'm doing! - I do not have Wicd - Yes, I have the router's information (key works in Windows) - Feedback of lshw says that the wireless card is Ultimate N Wifi Link 5300, vendor: Intel Corporation, physical id: 0 ,etc. The first two commands I was told to try work OK, but when I typed sudo ifconfig wlan0 essid ..... I got back 'essid: Unknown host' Would my question be better on the Ubuntu forums than here on AU?

  Read the article

• How do I know if I need a layer 3 switch?

  - by eekmeter

  We currently have a flat network with a bunch of unmanaged switches. I would like to use VLANs to segregate certain users like guests and I would like to use 802.1x. However, I'm not sure if what I need is a layer 3 or a level 2 switch. From what I understand a layer 3 switch does routing between VLANs. I don't think I need this at the moment but as I said I'm not sure since this is all new to me. What else would a layer 3 switch do for me? Our network is relatively small, less than a 100 users. What exactly does a layer 3 switch do that I can't get with a layer 2 switch? When would I need a layer 3?

  Read the article

• Ubuntu 12.04 "stuttering"

  - by Totte

  When I log in to the desktop Ubuntu seems to "stutter". Doing pretty much anything causes the cursor to freeze for a few seconds, and the rest of the screen updates something like every 15 seconds (during these 15 seconds I can still move the cursor). For example, opening the home folder I first see no effect, followed by a semi-transparent home folder, and finally the folder as it should be (this can take like 30 seconds); no animation, just three individual frames. Also, I sometimes don't see a window for a program, even though the program in question is supposed to be "up". Since this is my first experience of Linux, I confess I have no idea where to start - searching the web I only found problems with complete freezes/crashes requiring rebooting, as opposed to this "stuttering". I installed Ubuntu 12.04 32bit from a bootable USB stick a couple of days ago, right after a fresh Vista 32bit install. Thinking the stuttering might stop if I updated Ubuntu, I managed to install approx 270 updates through the Update Manager, but the stuttering was still there. Apart from the updates, I haven't installed any software other than what was included on the bootable USB stick. Vista and Ubuntu are on a single Crucial m4 SSD, in a dual-boot setup, with GRUB. CPU: Intel Core 2 Quad Q6600 GPU: Nvidia GeForce 8800 GTX (with the recommended proprietary drivers) RAM: 2GB DDR2

  Read the article

• Windows 2008 server and Redhat with only 1 ip address, can windows route the traffic?

  - by paulcap1

  I have a two home server VMs set up. Windows 2008 server on port 80 and Centos/Redhat on port 8080. Both have separate godaddy domain name A name records pointing to them. But I cant point both domain to the same IP I only have 1 wan ip address at home. So one of my domain is forward to my IP:8080. My question: Is it possible for my windows server to redirect a certain domain name to my Linux server on port 8080? So i Have mysite1.com going to windows and mysite2.com also going to the windows server but windows would redirect mysite2.com traffic to the linux ip address:8080. I want to access both sites at my work and my work firewall is strict and will not allow domain forwarding from godaddy.

  Read the article

• Port forwarding using IP Tables

  - by Darider

  I have a server with a LAN facing address of 192.168.5.100 (eth0) and another LAN facing address of 192.168.6.6 (eth1). On this server I have a Virtualbox instance of fedora running an apache webserver (on port 8080) with a bridged interface to eth1 on the host server with address of 192.168.6.7 Users on the 192.168.6.x network can access the Webserver on the Vbox instance (192.168.6.7) with no problems. My question is what kind of iptables entries or commands should be made/executed so as to allow for users on the 192.168.5.x network to access the webserver on the vbox instance. (I'm hoping their url can be something like: http://192.168.5.100:8080)

  Read the article

• How to troubleshoot port forwarding on Windows 7 (64 Bit) with ICS enabled?

  - by LearnCocos2D

  I want to forward some ports (1666 for perforce, 8081 for Hudson) on my Internet Gateway machine. This machine is running Windows 7 (64 Bit, legal, user-account) and connected to the Internet via cable modem (it's not a router). The Windows machine is sharing its Internet Connection via ICS and that works fine on all connected computers. I can access the services via the gateway's public IP (95.x.x.x) on the given ports if they are running on the gateway machine itself. I've added the ports and destination IP address (192.168.0.18) in the Internet network adapter's Advanced Settings dialog (Sharing tab). That's the same dialog where you have a list of preconfigured services like HTTP, FTP and other incoming services. When I do that I can't connect to the services anymore. For some reason port forwarding isn't working. I have uninstalled Bitdefender because I wanted to check if the Firewall interferes. I've also disabled the Windows Firewall and Defender to no avail. I tried a freeware tool that helps to setup port forwarding but that didn't work either. The target machine is a Mac OS X computer whose Firewall is disabled. The IP is static. I can successfully connect to the services using the local IP address (192.168.0.18) from two different machines, including the gateway computer. So internally and externally it seems to me that the ports are open and not blocked, and the issue is with port forwarding itself. From what I understand it should be enough to add an entry to the Advanced Settings dialog to enable port forwarding when there are no firewalls interfering. How can I troubleshoot why port forwarding isn't working for me? What steps should I follow to alleviate the issue? PS: I gladly accept command line solutions. Other things I've tried: adding an Inbound Rule to Windows Firewall for the 1666, 8081 ports trying with Windows Firewall enabled and disabled disabling/enabling the network adapter double-checked that the IP addresses are correct mapping a different incoming port to the service's actual port followed or checked the misc tips in this article What I haven't dared trying yet (let me know if it's worth a shot): disable/enable ICS remove all network adapters (via Control Panel), then re-install and re-configure them

  Read the article

• Remote desktop on Mac

  - by Crystal

  I just started a job using a Mac. I also have a Mac at home. The IT dpt here does not know how to remote login to my desktop from home. They installed the Cisco VPN client and game an account for that. I think at this point I need some remote desktop software to login to my work Machine. I looked online and downloaded the free version of TeamViewer. I didn't really understand how to use it. I have my work computer's name, and was hoping that would be enough to login, but I think I am mising a piece of the puzzle. Any thoughts on how to login to my work computer? Thanks.

  Read the article

• cannot log in to all account except guest after mounting new partition

  - by student

  I really really need help. to do my homework from school, since two days ago, I was installing oracle 11g on my ubuntu. through that process, there was lots of problems also, but searching a lot, in somehow I could go to the next phase installing it. (because it was the first time to install on ubuntu by myself..) but when I was making password for oracle and clicked next, it says there are not enough space for home/oracle folder, So to make another space, I mounted another space after checking Gparted and using Software device management, I mounted it. And when I rebooted it, since then, I cannot log in to my own administrator account and even to oracle account(that I made for oracle 11g on ubuntu ) when I type the passwords for it, it seems to work but it redisplay the first page to log in, without really logging in it.. So I loggined to here as guest account... and even I cannot try gnome console manipulation to restore or fix it.. because it is guest account... I`m struggling for three days and... help me, how do I need to do? and at the time oracle said it needs enough space for its home folder, how I should have done?

  Read the article

• Linux will not activate wireless after device has been re-enabled

  - by XHR

  Using a Eee 900A netbook by Asus. By pressing Fn + F2, I can disable or enable the wireless chip on the netbook, a blue LED indicates the status. I've been able to connect to wireless networks just fine with this netbook. However, if the wireless chip ever becomes disabled, I have to reboot to get my network connection back. This generally happens when suspending. For some reason the LED will be off and I have to hit Fn + F2 for it to light up again. However, after doing so, Linux will not reconnect to the network. It simply changes the wireless status from "wireless is disabled" to "device not ready". Even worse, I've recently had issues with the chip being enabled at boot, thus making it nearly impossible to get connected. I've searched around on-line but haven't found much of anything useful on this. This happens on all kinds of different distros including Ubuntu 9.10 Netbook, EeeBuntu 4 beta, Jolicloud and Ubuntu 10.04 Netbook.

  Read the article

• Iis multiple domain binding

  - by user2979484

  I've a server with vshpere running and one vm with Windows 2008 r2. I'm hosting a website on this vm. But I want to try to add another domain. Now I have 3 ip-adresses. 1 for vspehere. 1 for vm. 1 for 2nd domain. When I add a new site and edit the bindings to the last ip-adress (2nd domain) it doesn't work. I've added also a new network adapter on vsphere and edited in the windows network adapter. Could anyone help me out with this. Sorry for my bad english I hope you will understand it.

  Read the article

• Setting up Mail (Ubuntu Server 10.04)

  - by Sam

  It seems that mail on my server is functional -- kind of. I have a simple PHP mailer script that is capable of mailing any email address that is not local. e.g [email protected] However, if I try [email protected], it tells me /home/myuser/dead.letter... Saved message in /home/myuser/dead.letter and sometimes You have new mail. What does this mean? Does anyone know what I can do to make my emails actually go through? I'm using google apps for domains -- so basically gmail is hosting my domain's email and I'm not using my own servers for receiving mail. I've set up the nameservers correctly -- I wonder if it's got to do with my sending configuration (what does PHP's mail function normally send with anyway, sendmail?) or maybe it's my receiving configuration -- maybe something makes it act differently for "local" mail

  Read the article

< Previous Page | 481 482 483 484 485 486 487 488 489 490 491 492  | Next Page >