Search Results

Search found 16415 results on 657 pages for 'computer'.

Page 487/657 | < Previous Page | 483 484 485 486 487 488 489 490 491 492 493 494  | Next Page >

• Failing Seagate HDD - Not Recognised

  - by thefragileomen

  I am having a look at a friend's computer which contains a 500GB Seagate HDD. Unfortunately the HDD is not recognised by the BIOS menu and it beeps 11 times upon powerup. I've moved the HDD to another laptop but the problem remains. I've downloaded SeaTools for DOS (Seagate's Diagnostic tool) but unfortunately to no avail and the disc remains unseen when using this DOS boot disc. The HDD is only 6 months old so I'm very surprised at this but it appears a common problem with Seagate 2.5" HDDs as well as other HDDs manufactured by Seagate. I intend to try it in an external caddy on Thursday when back in work and also through a forensic writeblocker but just wondering if anyone has any other suggestions? I am of the opinion it is some chip on the HDD board which prevents it spinning due to a fault. If so, I've lost to deactivate this just so I can simply recover the data on the drive and start with a new disc. Thanks

  Read the article

• View changelog of all packages to be upgraded before upgrading

  - by Stein G. Strindhaug

  When using synaptic on my Ubuntu desktop computer i can review all changelog of all the packages to be upgraded, and unselect a package for upgrade if I want. On my desktop I usually install everything, but I like to at least review what the changes are so that I can delay the upgrade if I suspect it could cause problems with the development tools I use. On a server (Ubuntu Server) with no x-server how can I do the same thing on the console: list all packages that will be updated (apt-get --dry-run upgrade does this along with a lot of noisy simulated install messages), view the changelog (if any) from last upgrade to the version it will be upgraded to. select which packages I want to ignore, or which I want to upgrade I've searched a lot for this but I haven't found anything, possibly I'm not using the correct terminology; but surely this must be possible. Synaptic must get it's info from some some low-level tool I assume? Complicated shellscripts are welcome too, if this is not already easily done with the existing tools.

  Read the article

• Can Grub be configured to remember the last OS you booted into?

  - by Matthew

  I typically have 2-3 OSes in my boot menu: Ubuntu 10.04 Windows 7 [Sometimes, a third option, such as Ubuntu 10.04 Netbook] If I am in an OS other than the default choice (Windows 7 in this case), and I reboot, Grub boots into Ubuntu 10.04. This shouldn't happen--when I reboot in Windows 7, I want to stay in Windows 7. Is there any way to configure Grub to remember my last choice, and boot into that? Alternatively, it would be even better if Grub only did this when I rebooted (not when I first turn the computer on). I realize this may not be possible, so I'd be happy with simple last-choice-remembering.

  Read the article

• Is it possible to host a web server from behind a NAT

  - by iamrohitbanga

  My PC is behind a NAT router that has a public IP address. If I want to host a website then I believe I need a domain name which I can purchase from some site which would pledge to resolve all DNS requests for that domain name and send the IP address of my NAT router (assuming I do not want to host my domain name on their servers). Now I want to host a web server on my computer. What changes should be done to the NAT router's configuration to forward all HTTP requests for example.com to my PC in the internal network. Is the above strategy correct? Is it commonly used?

  Read the article

• When I plug an HDMI cable into my MacBook Pro with Retina Display, the resolution of the retina display changes

  - by Tyler Crompton

  I had an HDMI cable plugged in for a while that connected to a TV with no power. The retina display randomly flashed blue after a while and then changed to a different resolution (possibly 1080p). I unplugged the HDMI cable and nothing happened. So I restarted the computer to no avail. I was still having issues. So I fiddle with some settings after plugging in the HDMI cable again. Now, the retina display appears fine when no HDMI cable is plugged in, but when there is one plugged in, the resolution changes. I have mirroring turned off (which is what I want). The resolution of the retina display when an HDMI cable is plugged in is 3,360px x 2,100px (according to the size of a screenshot) and the external display is 1,600px is 900px. How can I fix the retina display to show with the correct resolution.

  Read the article

• Windows XP SP3 dissapearing mapped drives

  - by Alan Spark

  I am running Windows XP Pro SP3 and I've got a few shares on my NAS that are mapped to reconnect automatically. I can access the drives soon after starting windows but after a period of inactivity I get the error "The local device name is already in use". This cannot be remedied until I restart the computer - I've tried disconnecting and re-mapping without success. This was working fine until I recently reinstalled Windows and I'm not sure what is going on. Any help would be greatly appreciated. Thanks, Alan

  Read the article

• Startup script for Windows Recovery Environment?

  - by Recovery

  I'm trying to automate the Windows 7 Recovery Environment. I want the computer to be able to boot into the Recovery Environment, automatically run some commands, and then restart back into Windows. The reason for this is that I want to use the Recovery Environment to edit some system files that are not writable while Windows is running. (Of course, this could be done using GRUB and Linux, but it would be even better if one could use the built-in Windows Recovery Environment and avoid the need to install a separate bootloader and OS.) So far, I've found out how to tell Windows 7 to reboot into the recovery environment: reagentc /boottore shutdown /r /t 0 But once the Recovery Environment loads, it opens a dialog that requires user input to continue. Instead of that dialog, I would like to be able to specify a script to run instead. Any ideas on how to accomplish this would be appreciated. Thanks!

  Read the article

• suddenly can't connect to Windows 7 PC from xbmc

  - by Damon

  I have xbmc installed on a softmodded classic xbox and all of a sudden I cannot connect to the shared folders on my Windows 7 PC. Well, it can connect but it wants a username and password, but none exist on my computer. It's been several weeks since I last used it, but it was working fine then! and no particular changes I can think of aside from I guess a few Windows updates. I've seen reference online to Windows Live essentials causing issues with file sharing, but I don't even have that installed. And I made sure to tick 'turn off password protected sharing' in my advanced network setup. I had the guest account turned off and working fine before, and tried turning it on but no luck. I can access my shared folders fine from other Computers and a ps3. I've read a couple threads of similar situations on various folders and none of their solutions have worked.

  Read the article

• Why do VMs need to be "stack machines" or "register machines" etc.?

  - by Prog

  (This is an extremely newbie-ish question). I've been studying a little about Virtual Machines. Turns out a lot of them are designed very similarly to physical or theoretical computers. I read that the JVM for example, is a 'stack machine'. What that means (and correct me if I'm wrong) is that it stores all of it's 'temporary memory' on a stack, and makes operations on this stack for all of it's opcodes. For example, the source code 2 + 3 will be translated to bytecode similar to: push 2 push 3 add My question is this: JVMs are probably written using C/C++ and such. If so, why doesn't the JVM execute the following C code: 2 + 3..? I mean, why does it need a stack, or in other VMs 'registers' - like in a physical computer? The underlying physical CPU takes care of all of this. Why don't VM writers simply execute the interpreted bytecode with 'usual' instructions in the language the VM is programmed with? Why do VMs need to emulate hardware, when the actual hardware already does this for us? Again, very newbie-ish questions. Thanks for your help

  Read the article

• Approach to Authenticate Clients to TCP Server

  - by dab

  I'm writing a Server/Client application where clients will connect to the server. What I want to do, is make sure that the client connecting to the server is actually using my protocol and I can "trust" the data being sent from the client to the server. What I thought about doing is creating a sort of hash on the client's machine that follows a particular algorithm. What I did in a previous version was took their IP address, the client version, and a few other attributes of the client and sent it as a calculated hash to the server, who then took their IP, and the version of the protocol the client claimed to be using, and calculated that number to see if they matched. This works ok until you get clients that connect from within a router environment where their internal IP is different from their external IP. My fix for this was to pass the client's internal IP used to calculate this hash with the authentication protocol. My fear is this approach is not secure enough. Since I'm passing the data used to create the "auth hash". Here's an example of what I'm talking about: Client IP: 192.168.1.10, Version: 2.4.5.2 hash = 2*4*5*1 * (1+9+2) * (1+6+8) * (1) * (1+0) Client Connects to Server client sends: auth hash ip version Server calculates that info, and accepts or denies the hash. Before I go and come up with another algorithm to prove a client can provide data a server (or use this existing algorithm), I was wondering if there are any existing, proven, and secure systems out there for generating a hash that both sides can generate with general knowledge. The server won't know about the client until the very first connection is established. The protocol's intent is to manage a network of clients who will be contributing data to the server periodically. New clients will be added simply by connecting the client to the server and "registering" with the server. So a client connects to the server for the first time, and registers their info (mac address or some other kind of unique computer identifier), then when they connect again, the server will recognize that client as a previous person and associate them with their data in the database.

  Read the article

• USB HD Freezes Windows Explorer

  - by nfplee

  I recently purchased a "Seagate STBX1000200 1TB Expansion 2.5 inch External Hard Drive". It has been working without problems until recently. When i plug the device into a USB port the device is recognised as it appears in the device manager but when i go to Windows Explorer and try to open it (or right click on it) it hangs/freezes windows explorer. Please note i am using Windows 7 Professional. I have already tried various things without success after searching for people with similar problems. I did read that it could be a problem with how the computer assigns a drive letter. But whrn i go to disk management (when running as an administrator) it hangs and displays the following message: Connecting to virtual disk service I'd appreciate it if anyone could offer some advice. Thanks

  Read the article

• SD Card only mounted after a reboot

  - by evothur

  Hi everyone. I have a Kingston 2GB MicroSD and I plug it in via an inconix MicroSD Adapter to the internal card reader of my Samsung N210 Netbook with Ubuntu 10.10, but it doesn't show up. Only if I reboot the system when the card's plugged in it shows up. Why does it need a reboot for mounting? sudo fdisk -l gives the output below. But I can only see the drive when I reboot the computer while the card's plugged. Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9a5a7990 Device Boot Start End Blocks Id System /dev/sda1 1 1959 15728640 27 Unknown Partition 1 does not end on cylinder boundary. /dev/sda2 * 1959 1972 102400 7 HPFS/NTFS /dev/sda3 1972 18992 136718750 83 Linux /dev/sda4 18992 19458 3738625 5 Extended /dev/sda5 18992 19458 3738624 82 Linux swap / Solaris Disk /dev/sdb: 1973 MB, 1973420032 bytes 60 heads, 59 sectors/track, 1088 cylinders Units = cylinders of 3540 * 512 = 1812480 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 1089 1927100+ 6 FAT16

  Read the article

• Ubuntu not showing hard drive

  - by ojek

  I have a laptop which had a broken installation of Windows 7 installed on it. I created a Ubuntu live USB and tried installing Ubuntu over that Windows 7. After a few minutes, I got an error message, so I needed to restart the computer. Now the laptop says that there is no bootable device - reasonable message given that there was an error during Linux installation. However: BIOS can see my hard drive, When I start Ubuntu in live mode, and try either sudo fdisk -l or gparted, it doesn't show any hard disk drives. I am 90% sure that the hard drive is broken, but it is weird that BIOS can see it, and Ubuntu doesn't. How can I be 100% sure about that hard drive? Is there any additional way of detecting my hard drive from Ubuntu?

  Read the article

• Using Process Monitor to track registry changes

  - by CChriss

  It seems many people like using Process Monitor to see what changes are being made to the registry during a process. So I downloaded it. I want to see what changes are made in the registry by some config changes I'm making on my computer so I can write them into a vbs script to do them easily. Can someone tell me how to drive Process Monitor to capture the info? In the Help I don't see how to do it. I'm using Windows 7 home Premium 64 bit.

  Read the article

• Problem connecting with RDP between Mac and Win2k3 server

  - by salle55

  I have an iMac running Mac OS X 10.5.8 and the RDP Connection Client 2.0.1. http://salle.dyndns.org/misc/rdp%5Fproblem1.png When I try to connect to a Windows 2003 Server on the same network I get a dialog saying "Remote Desktop Connection cannot verify the identity of the computer that you want to connect to". Picture: salle.dyndns.org/misc/rdp_problem2.png And when I press the Connect-button in the previous dialog I get the same message in another dialog: Picture: salle.dyndns.org/misc/rdp_problem3.png I can connect to the Win2k3 server from a Vista machine, and it used to work from the Mac as well. I stopped working from the Mac after I did some configuration on the win2k3 server, removed and added the the connection in the Terminal Services Configuration: Picture: salle.dyndns.org/misc/rdp_problem4.png What do I need to do to be able to connect from the Mac again? (I have not enough reputation to post multiple links or images)

  Read the article

• Can't boot after compiling 3.1 kernel, can only get to terminal

  - by olssy

  Long story short: I tried compiling kernel 3.1 on Ubuntu 11.10 at the same time I had an update waiting for a reboot. Computer would boot to a black screen and would hang there. Ended up installing 11.10 on top of old install with a Live CD. Now I had a purple screen on bootup but it would end up booting. Realized Grub was the problem and tried some stuff but nothing worked. I ended up trying to install propriety ATI video drivers and since that nothing has worked, no grub menu(purple screen) and when it boots into the kernel it ends up hanging, I can sometimes get a terminal up with alt-fx. I have tried removing the ati drivers with the ati script, purging my fglrx driver, reconfiguring my xconf.org and following any tutorial I can find about fixing a broken graphics driver, but to no avail. I've gotten to a point were it seems that the ati propriety drivers are correctly loaded but it still has no grub boot menu and won't boot into Ubuntu. I've chased down my logs and this line is from kern.log: unity-greeter[3269]: segfault at 0 ip b7245cbbsp bf9d3900 error 4 in libgio-2.0.so.0.3000.0[b71ad000+142000] That line leads me to believe I don'T have the correct libgio-2 librairy on my system but have no idea how to find out what package has the correct version... My xorg.conf has no errors and seems to imply the fglrxdrm module got loaded correctly. Would be a bit complicated pasting the whole file here but if it would help I'll post it. LAstly, running fglrxinfo give me: Error: Unable yo open display (null) Any help or link to another tutorial would be appreciated. Thanks.

  Read the article

• Lan DNS not working after reinstall of Ubuntu 13.10

  - by DrorCohen

  I upgrade my Ubuntu desktop to 13.10. When I say upgrade I mean installed on a new partition from scratch (old partition is available if To the problem: I'm trying to ping a host (Drobo-FS server) by it's host name. I get "Unknown Host". However pinging from another computer on the same lan - works fine (a laptop with 12.04 lts). for that matter every ping from the 13.10 to the local lan by hostname fails, ping with ip works. I don't have a local DNS server but somehow all the other computers in the network find each other by host name - only this new one fails... help appreciated...

  Read the article

• Ubuntu 14.04 LTS 64-bit install alongside Windows 7

  - by user289222

  I've tried installing Ubuntu 14.04 LTS alongside my Windows 7 OS, following the exact procedure given by the Ubuntu website and random other tutorials. I've tried with a LiveCD and with a USB stick but I always run into the same problem. When I'm at the screen where I'm allowed to select how I want to install Ubuntu ("alongside", "erase Windows 7", "something else"), the first option says "Install Ubuntu inside Windows 7" instead of "Install Ubuntu alongside Windows 7". From pretty much all tutorials I've seen, the tutorial says that the option should say "alongside". I click "inside" anyway, and Ubuntu doesn't install at all. Instead, my computer just reboots, and goes back to the Try Ubuntu or Install Now screen. This happens regardless of using a LiveCD or a USB stick. I've also tried manually resizing my partitions using "something else". Oddly, I see 4 sda partitions: /dev/sda type size used /dev/sda1 1mb unknown Windows 7 (loader) /dev/sda2 ntsf 208mb unknown Recovery Windows Environment (loader) /dev/sda3 ntsf ~752000mb unknown Recovery Windows Environment (loader) /dev/sda4 ~18000mb unknown I try resizing the largest partition, but some sort of internal error occurs and it doesn't let me resize my partitions. Any ideas on what's going on and how to solve it?

  Read the article

• Bluetooth headset turns off when Skype call ends

  - by Claude

  For about 6 months, I haven't been able to use Skype because when I end a Skype call, my Plantronics Callisto headset gets turned off. I'm paralyzed so I can't turn it on manually. I have a Sony VAIO computer running Windows 7. I have updated my Bluetooth dongle software, uninstalled and reinstalled Skype and uninstalled Skype and gone back to an earlier version; all to no avail. Neither Plantronics nor Skype technical support are interested in looking into this problem for me.

  Read the article

• Hidden bootloader

  - by Jack

  I need a bootloader that will work as described: I want my computer to boot Windows, that is my main OS installed on a primary bootable partition. However, I'd like to have a 2-3 second span with blinking cursor, before Windows starts. If I press any key in that period it should launch Ubuntu from a small Truecrypt-encoded partition, upon providing a correct password. In other words I'm looking for a hidden bootloader that would expose itself only when a key is pressed during a certain time. Do you happen to know anything like that?

  Read the article

• Is there a time machine equivalent for windows that can back up network files?

  - by Jim Thio

  This question is similar to Does an equivalent of Time Machine exist for Windows?, with one difference: The files I want to back up are on a network drive. The computer on that network drive is running Windows XP. I want to back up data on Windows 7. How would I do so? I'd like something similar to Mac OS X' time machine. So copy of data every hour, day, week. Then thinning out, data gets deleted automatically as time goes by. For example, the data for last day is kept as hourly snapshots. For last week, as daily snapshots every day. And for last month as weekly snapshots. How can I achieve this?

  Read the article

• VMware Workstation 7&8&9 does not generate /etc/vmware/network upon installation

  - by dash17291

  When I install VMware Workstation on Arch linux Virtual ethernet is not working. $ sudo tail /var/log/vnetlib Aug 28 22:20:33 VNLFileExists - Cannot check for file or directory: /etc/vmware/networking , error: No such file or directory Aug 28 22:20:33 VNLNetCfgLoad - Import file does not exist Aug 28 22:20:33 VNL_Load - Error loading the vnet configuration, file used: /etc/vmware/networking Aug 28 22:20:33 VNLNetCfgUnload - Requested cache is not loaded Database file is not present. Failed to initialize Aug 28 22:20:41 VNLFileExists - Cannot check for file or directory: /etc/vmware/networking , error: No such file or directory Aug 28 22:20:41 VNLNetCfgLoad - Import file does not exist Aug 28 22:20:41 VNL_Load - Error loading the vnet configuration, file used: /etc/vmware/networking Aug 28 22:20:41 VNLNetCfgUnload - Requested cache is not loaded Required modules compiled. Previously I have copied that file or directory (I don't remember) from a working installation, but now I need a real solution. It's strange for me, may be a hardware issue also because with Ubuntu the same thing happens on the same computer.

  Read the article

• Which interface defines the physical address of a Dialup connection

  - by Debabratta

  I use dial up connection to connect to the Internet. When I type ipconfig/all in the command prompt it shows me a physical address along with description for the dial up connection. The description field shows WAN(PPP/SLIP)Interface. I want to know upon which this physical address depends? It depends on my computer or ISP. On changing my ISP, physical address for this dialup connection will change or remain same? Please give some idea.

  Read the article

• How can I go about learning to write a shader

  - by Donutz

  So here's the background: I'm writing a game, just for my own amusement and education really. I've already come to the conclusion that XNA was the way to go for graphics, I've bought a couple of books, I've gotten basic game graphics going, and that's great. Now I'm starting to get a little in-depth and I'm starting to need to do stuff not covered in my (beginner) books. In particular, I need to display a sprite using a mask. Actually, what I need to do is display a generic sprite with a different color for each player. After banging around on the web, it seems the way to go is to have a color texture (one for each player) which I display using the mask, then display the generic part of the sprite. This has to be done dynamically, i.e. at runtime because there are too many sprites to keep in memory if I try to generate all the permutations at startup. So, I need to use a shader. Fine. I've downloaded a sample shader program, and managed to hit it with a hammer until it does something close enough to what I want so that I know I'm on the right track. And here, we come to my problem... I have no friggin' clue what I'm doing. While there are a lot of samples and such about shaders, no one ever actually explains what's going on. For instance, I can't find any real docs on Tex2D. I feel like the guys in Zoolander poking at the computer. So, my question (yes, I have a question) -- where is a good URL or what is a good book to take me from dumskie to reasonably competent to write a basic shader?

  Read the article

• Do you have to recreate workspaces after upgrading a TFS 2008 server to TFS 2010?

  - by Clara Oscura

  I am just reposting this thread from a MSDN forum since it seems to be unavailable. It was very useful when I was having trouble with my folder mappings after migrating to TFS 2010. Question: I opened VS2008 and connected it to the upgraded 2010 TFS server.  Upon clicking any of our Team Projects in source control explorer I get "Team Foundation Error - The workspace MYWORKSPACE;DOMAIN\MYUsername already exists on computer MYPCNAME." Answer: The same local paths on your machine are mapped to 2 different workspaces, one on the preupgrade server and one on the postupgrade server.  It's not safe to have multiple workspaces on different servers mapped to the same local paths b/c you could pend some changes while connected to one server, and the other server would have no idea what you did.  You should either delete your conflicting workspaces from one of the servers (if you don't need them on both), or test the new TFS instance from a new workspace (on different machine). If you want to test an existing production workspace on both servers, then yes, you will have to mess around with the workspace cache. You don’t have to delete the entire cache, you just need to run "tf workspaces /remove:* /server:<serverurl>" to clear the cached workspaces from a server (the command won't delete the workspaces), and possibly "tf workspaces /server:<server>" to refresh the workspace cache for a given server.  You will also have to do back up and restore the workspace before switching servers or your local files could be inconsistent. From the “Microsoft Visual Studio Team Foundation Server 2010 Beta 1” forum (not available anymore?) Technorati Tags: TFS 2010,TFS Workspaces,Team System,Team Foundation Server 2010

  Read the article

< Previous Page | 483 484 485 486 487 488 489 490 491 492 493 494  | Next Page >