Search Results

Search found 16499 results on 660 pages for 'g off'.

Page 487/660 | < Previous Page | 483 484 485 486 487 488 489 490 491 492 493 494  | Next Page >

• Why can't I physically access my machine after a remote session?

  - by Steve Crane

  I have a Dell Optiplex 960 desktop running Windows 7 64-bit at work. I typically leave it locked rather than logged off when I go home, so that I'm able to remote in from home and continue working if I wish. This is where the problem comes in. If I don't remote in there is no problem and I can simply unlock the next morning. It's when I do remote in that I have a problem. Remote sessions work as expected but when I get to work the next morning the machine appears to have gone into a sleep or hibernate state, from which no amount of mouse moving or keyboard pounding will wake it. The machine is not hanging as remote sessions to it are still possible; it seems that physical access from it's own mouse and keyboard are lost. The only way to gain access is to press and hold the power switch for several seconds until the machine shuts down. Of course this means Windows does not gracefully shut down and after powering up it takes several minutes for the machine to boot and reach the login prompt; presumably while it checks the disk. Has anyone else seen something like this?

  Read the article

• Create a PDF that defaults to flip on short edge when printed double-sided

  - by user568458

  We're creating a 2-page PDF brochure with a target audience who will print it on their regular office or home printers. If it is printed on a double-sided printer (common in offices), it'll come out correctly if set manually by the user to "Flip on short edge", but will come out with the second page upside down if default settings are used (flip on long edge). Our target audience aren't very tech-literate, and we've found that even within our own office network there is variation in the location of the 'Flip on short edge' setting - so it isn't realistic to give everyone who downloads the PDF instructions on how to change this setting or to expect everyone to find out how to change the setting off their own backs. So, when creating a PDF (ideally using Adobe InDesign or Acrobat, but if other software or hacking is needed that's fine...), is there a way to configure the PDF file itself so that when printed double-sided with default settings, it flips on the short edge? If possible, it'll be useful supplementary info to know how reliable any such methods are across different PDF readers (e.g. Adobe Reader, Acrobat, Mac Preview, inbuilt browser readers (e.g. chrome), FoxIt, etc). If questions about content creation like this aren't a great fit here, feel free to migrate it to the graphic design stackexchange site - this question seems to fall half way between the two sites

  Read the article

• Hard drive degredation from large memory usage and paging files?

  - by Stephen R

  I've had a question(s) regarding computer degradation going through my head for a while and haven't found many good resources for researching it. 1) First off, when is the virtual RAM/paging file on a hard drive used by Windows? Is it used when the RAM is full? Or does it use the Virtual RAM/paging file as intermediate caching between the RAM and actual hard drive space all the time? 2) If I were to run many applications on my computer at the same time and have a bad habit of doing this for the entire lifetime of the computer, does it use more of the virtual RAM/paging file than if I were to have fewer programs running? Just to note, the RAM never fills up on my computer but it is used heavily. 3) By extension of question 2, if the virtual RAM/paging file is used more heavily, would that result in rapid hard drive degradation? I have seen a pattern among all of the computers that I have owned or used in the past 5 years. I am the kind of person to leave my web browser up with 40 tabs among other programs which will eat up 40% of my memory typically. Over time my computer will slow down, browsers start crashing, programs start seizing up or crashing themselves, eventually the computer becomes essentially unusable. I have been trying to rack my mind to come up with a solution other than to purchase a new PC to have it die on me in the next couple years as well. This is the only thought that has come to mind that might have a simple hardware fix...Windows ReadyBoost...Maybe? I'd like to be able to discuss this so I can learn something about all of the above. Thanks.

  Read the article

• installing mod_wsgi giving 403 error

  - by John Smiith

  installing mod_wsgi giving 403 error httpd.conf i added code below WSGIScriptAlias /wsgi "C:/xampp/www/htdocs/wsgi_app/wsgi_handler.py" <Directory "C:/xampp/www/htdocs/wsgi_app/"> AllowOverride None Options None Order deny,allow Allow from all </Directory> wsgi_handler.py status = ‘200 OK’ output = ‘Hello World!’ response_headers = [('Content-type', 'text/plain'), ('Content-Length', str(len(output)))] start_response(status, response_headers) return [output] Note: localhost is my virtual host domain and it is working fine but when i request http://localhost/wsgi/ got 403 error. <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot "C:/xampp/www/htdocs/localhost" ServerName localhost ServerAlias www.localhost ErrorLog "logs/localhost-error.log" CustomLog "logs/localhost-access.log" combined </VirtualHost> Error log [Wed Jul 04 06:01:54 2012] [error] [client 127.0.0.1] File does not exist: C:/xampp/www/htdocs/localhost/favicon.ico [Wed Jul 04 06:01:54 2012] [error] [client 127.0.0.1] client denied by server configuration: C:/xampp/Bin/apache [Wed Jul 04 06:01:58 2012] [error] [client 127.0.0.1] Options ExecCGI is off in this directory: C:/xampp/www/htdocs/wsgi_app/wsgi_handler.py [Wed Jul 04 06:01:58 2012] [error] [client 127.0.0.1] client denied by server configuration: C:/xampp/Bin/apache [Wed Jul 04 06:01:58 2012] [error] [client 127.0.0.1] File does not exist: C:/xampp/www/htdocs/localhost/favicon.ico [Wed Jul 04 06:01:58 2012] [error] [client 127.0.0.1] client denied by server configuration: C:/xampp/Bin/apache Note: My apache is not in c:/xampp/bin/apache it is in c:/xampp/bin/server-apache/

  Read the article

• No Microsoft Security Essentials for Windows 8. So, how to access similar Defender features/settings?

  - by Chris W. Rea

  I just installed Windows 8 Pro. One of the first things I went to do is install Microsoft Security Essentials, thinking I still needed add-on security software, but I've learned here that it isn't required for Windows 8. Witness: Got Windows 8 or Windows RT? Windows Defender for Windows 8 and Windows RT provides the same level of protection against malware as Microsoft Security Essentials. You can't use Microsoft Security Essentials with Windows 8, but you don't need to — Windows Defender is already included and ready to go. [...] All well and good. However, on Windows 7, once you installed Microsoft Security Essentials, you got a tray icon, and from there you could access the features of MSE, such as perform custom scans, turn off real-time protection (temporarily, of course), check for updates, etc. However, Defender on Windows 8 doesn't display a tray icon – and yes, I've already made sure I'm displaying all icons in the notification area. So, how to access the similar specific features of Windows Defender on Windows 8?

  Read the article

• Router startup problem

  - by gfmoz

  I have problems with my Tilgin Vood Router. As I try to start my router by turning the power on (captain obvious), it generally doesn't work the first 3-4 times. This is getting very annoying. Five minutes after turning the power on the router's signal LEDs don't blink in the way they should do in a connected state. I can connect to my routers web configuration interface through my PC connected to it via LAN though I can't access the internet. It usually takes the router five minutes to get to the point where it should be connected to the internet but as it doesn't work the first times. So I turn on my router 3-5 times, let him work 5 minutes and then suddenly, after turning the pow*emphasized text*er off and on again it all works. The problem is regarding startup only, when I get it to work everything runs as smooth as a 1980-s text-based C++ game on a 3ghz machine. I also have to restart my PC too in order for everything to work. - How can I solve this problem? - Just leave the router turned on all time? I prefer a daily IP switch, though. - May the problem have something to do with my PC? There is another one connected to the router too and it doesn't work there either.

  Read the article

• Developing high-performance and scalable zend framework website [on hold]

  - by Daniel

  We are going to develop an ads website like http://www.gumtree.com/ (it will not be like this one but just to give you an ideea) and we are having some issues regarding performance and scalability. We are planning on using Zend Framework for this project but this is all that I'm sure off at this point. I don't think a classic approch like Zend Framework (PHP) + MySQL + Memcache + jQuery (and I would throw Doctrine 2 in there to) will fix result in a high-performance application. I was thinking on making this a RESTful application (with Zend Framework) + NGINX (or maybe MongoDB) + Memcache (or eAccelerator -- I understand this will create problems with scalability on multiple servers) + jQuery or maybe throw Backbone.js in there, a CDN for static content, a server for images and a scalable server for the requests and the rest. My questions are: - What do you think about my approch? - What solutions would you recommand for developing an high performance, scalable application expected to have a lot of traffic using PHP(Zend Framework 2)...I would be interested in your approch. I should note that I'm a Zend developer, I'm working with Zend for over 3 years, this is why I'm choosing it.

  Read the article

• Looking for suggestions for hosting Windows 2000 Server in the cloud / VPS / etc?

  - by JohnyD

  I have a Windows 2000 Server, currently virtualized in Hyper-V, that I would like to get running off-site as a backup (cloud, VPS, etc). You can't virtualize in EC2 and I'm fairly certain there are no Server 2000 AMI's floating about (correct me if I'm wrong!). If anyone has a recommendation on how I can get a virtualized Windows 2000 Server running in a secure, remote environment I would be grateful. As far as locations go I'd be interested in both North America as well as Australia and Europe. In a nutshell, we're ploughing our way out of a legacy codebase and this server is the last that remains of the legacy apps. However, it is still very much used by our clients. Everything is backed up each night (data, images, etc) to tape which is then taken offsite. However, in the event of a fire I would love to have a backup legacy server to point DNS records to. So while I am rebuilding from the ashes our services would already be available. It would save a lot of time and make my managers all the more happy (and that's what it's all about, riighhtt? :D) Thank you all for your suggestions. Please let me know if I've left out any important information. Additional info: - the legacy codebase does not function properly in Server 2003

  Read the article

• Linux NFS create mask and force user equivalent

  - by Mike

  I have two Linux servers: fileserver Debian 5.0.3 (2.6.26-2-686) Samba version 3.4.2 apache Ubuntu 10.04 LTS (2.6.32-23-generic) Apache 2.2.14 I have a number of Samba shares on fileserver so that I can access files from Windows PCs. I am also exporting /data/www-data to the apache server, where I have it mounted as /var/www. The setup is okay, except for when I come to create files on the NFS mount. I end up with files that cannot be read by Apache, or which cannot be modified by other users on my system. With Samba, I can specify force user, force group, create mask and directory mask, and this ensures that all files are created with suitable permissions for my Apache web server. I can't find a way to do this with NFS. Is there a way to force permissions and ownership with NFS - am I missing something obvious? Although I've spent quite a bit of time with Linux, and am weaning myself off Windows, I still haven't quite got to grip with Linux permissions... If this is not the right way to do things, I am open to alternative suggestions.

  Read the article

• Percona-server time out on /etc/init.d/mysql start

  - by geekmenot

  Every time I start mysql, using /etc/init.d/mysql start or service mysql start, it always times out. * Starting MySQL (Percona Server) database server mysqld [fail] However, I can get into mysql. Just wanted to know if there is a problem with the install because it happens all the time, not a one off error. mysql-error.log shows: 121214 11:25:56 mysqld_safe Starting mysqld daemon with databases from /data/mysql/ 121214 11:25:56 [Note] Plugin 'FEDERATED' is disabled. 121214 11:25:56 InnoDB: The InnoDB memory heap is disabled 121214 11:25:56 InnoDB: Mutexes and rw_locks use GCC atomic builtins 121214 11:25:56 InnoDB: Compressed tables use zlib 1.2.3 121214 11:25:56 InnoDB: Using Linux native AIO 121214 11:25:56 InnoDB: Initializing buffer pool, size = 14.0G 121214 11:25:58 InnoDB: Completed initialization of buffer pool 121214 11:26:01 InnoDB: Waiting for the background threads to start 121214 11:26:02 Percona XtraDB (http://www.percona.com) 1.1.8-rel29.2 started; log sequence number 9333955393950 121214 11:26:02 [Note] Server hostname (bind-address): '0.0.0.0'; port: 3306 121214 11:26:02 [Note] - '0.0.0.0' resolves to '0.0.0.0'; 121214 11:26:02 [Note] Server socket created on IP: '0.0.0.0'. 121214 11:26:02 [Note] Slave SQL thread initialized, starting replication in log 'mysql-bin.005163' at position 624540946, relay log '/data/mysql/mysql-relay-bin.000043' position: 624541092 121214 11:26:02 [Note] Slave I/O thread: connected to master '[email protected]:3306',replication started in log 'mysql-bin.005180' at position 823447620 121214 11:26:02 [Note] Event Scheduler: Loaded 0 events 121214 11:26:02 [Note] /usr/sbin/mysqld: ready for connections. Version: '5.5.28-29.2-log' socket: '/data/mysql/mysql.sock' port: 3306 Percona Server (GPL), Release 29.2

  Read the article

• Should an HA failover occur in this scenario?

  - by joeqwerty

  I'm running vSphere 5 in an HA cluster across two hosts (vsphereA and vsphereB). I have the HA cluster configured for host monitoring and datastore heartbeat monitoring with admission control disabled (hopefully I rightfully understand that datastore heartbeat monitoring prevents inadvertent and unwanted HA failovers due to management network isolation). Each host has a single connection to a dedicated iSCSI network and iSCSI target (no MPIO). All vmdk's for all VM's exist on the iSCSI datastore. As a test of HA I disconnected the iSCSI connection on vsphereB and was surprised to see that the running VM's on vsphereB continued to run on vsphereB. The powered off VM's were showing as inaccessible (which I expected due to the fact that they weren't running and the connection from vsphereB to the iSCSI target was severed) but the running VM's continued to run and continued to be "owned" by vsphereB. I expected to see an HA failover occur for those VM's and expected to see them "owned" by vsphereA after the HA failover (which didn't occur). I'm at a loss to understand why an HA failover didn't occur for those VM's. Am I misunderstanding in which cases an HA failover should occur?

  Read the article

• Has anyone else experienced page fault crashes with Snow Leopard on MacBook Pro?

  - by BruceMartin

  I bought a Macbook Pro computer on Sept 3rd from MacMall. As I was using it to learn Snow Leopard (this is my first Mac, I am a long time Windows developer), it would crash every one or two hours. After calling Apple support, I dropped it off at the Apple store for diagnostic testing and repair. WhenI picked up the computer from Apple, they told me that it did not crash while they had it. They suspected a software problem, so they had done a fresh install of Snow Leopard for me. At home I went through the start up procedure with the newly installed Snow Leopard. Then I downloaded the iPhone SDK, and the computer crashed again while I was away waiting for the download to finish. I was using a USB mouse, which was the only device attached. No other software installed. I was presented with a dump that mentions terms like "panic", Kernel trap", and "page fault". Does anyone have any idea what this problem might be? I really can not use this MacBook under these circumstances.

  Read the article

• BIOS not detecting working SATA hard drive.

  - by Evan

  Some time ago my power supply died. It's a long story from then till now, but the important bit is that I ended up with a new hard drive and a new power supply. I tested to see if my original hard drive was still alive, and it booted and worked perfectly until I turned it off. When I started it again it would not boot. I bought new SATA cables, assuming that the one I had was not seating properly (it was cheap and wobbly), but no dice. Upon start-up I am presented with a message telling me to insert boot media into the selected drive or add a drive and restart. Neither the new or the old drive is detected by BIOS, my Vista install disk, or from my bootable Linux USB drive. When I remove all of the RAM the computer ceases outputting visual information, and upon reinstalling the ram and starting up again gives me a "failed overclock" error. So, does anyone have an idea as to what might be going on? I'm completely lost at this point.

  Read the article

• Mysterious Windows 7 slowdown problem

  - by cletus

  I have a fairly beefy machine: Intel Q9450 8GB DDR2800 (4x2) Intel X25-M G2 80GB SSD Several other hard drives Windows 7 Ultimate 64 In the last month I've gotten a mysterious slowdown problem. When I start my IDE (IntelliJ IDEA) it usually takes about 20 seconds on the SSD. If my machine has been on for a day or two (as far as I can tell this is the only pattern) and I try to start the IDE, it brings my machine to a halt. CPU usage goes up to 25% per core (so it's basically 100% usage) and it takes up to 5 minutes to start. Other things I've noticed: iTunes will start to skip and stutter (my music is running off a second hard drive). The only persistent things I'm running are: AVG Anti-Virus Spybot (the slowdown predates this) Hamachi and Murmur (again the slowdown predates this) Apple Airport Base Agent HP OfficeJet 8500 driver/manager The browser I use is Chrome. I can't think why that'd be relevant but it's always on so I thought I'd mention it. When this happens I can't see a reason for it in the process list. No CPU hogs. No spikes in IO activity that I can see. Basically I'm at a loss to explain it and need to reboot, at which point everything returns to normal (for awhile). FWIW the Intel SSD is about 75-80% full. I know being too full can really degrade performance. I don't believe that's the issue here. Does anyone have any ideas on what I can do to fix this or at least help find what's going wrong? This same machine (sans SSD) could run Win XP and stay up fine for a month or two.

  Read the article

• Multiple Video Cards - Stuttering

  - by jstawski

  I have two video cards: - XFX PVT84JUDD3 GeForce 8600GT XXX 256MB 128-bit GDDR3 PCI Express x16 SLI Supported Video Card - EVGA 256-P1-N399-LX GeForce 6200 256MB 64-bit GDDR2 PCI Video Card both running the same set of drivers on Windows 7 64-bit. When I work with 2 monitors connected to the 8600GT card everything works smoothly. When I connect the third one to the 6200 then Windows works well and all of a suddon the screens turns black for up to 5 minutes. Then it goes back and at some random interval it goes black again. I can still see the pointer and hit CTRL+ALT+DEL and see the menu to log off, bring the task manager, etc. I've tried changing the 6200 to another PCI slot and the error persists. I've tried connecting 2 monitors only one to each card, same problem. Tried swapping them, mixed and matched the monitors to see if it was a problem with the monitor and my conclusion was that it is not the monitor. The problem also occurred with Vista 64 as well. What could be generating this problem? Can it be the fact that they are different interfaces? Maybe the Motherboard? Should I change something on the BIOS? What do you guys think?

  Read the article

• How can I determine what is killing my network adapter win7 or vista?

  - by datatoo

  I thought this issue was like another person here, and that downloading the nvidia chipset drivers was the solution. However that is not all that is going on. This machine had Vista 64bit and is now Win7. Same issue with both. I have explicitly been denying network driver updates since getting things working again and when a Windows updates occurs on seemingly benign Office updates the adapter fails to work. Is the update process somehow protecting this machine by turning off things and it fails to recover connectivity after a restart? All that seems to ever work is a system restore. Which does work. Since there are 25 pending updates asking to do there thing, I hate to think this is a one by one update test to find the culprit. Any ideas? This has an integrated nic, video, and I guess audio on the motherboard. ES5200 intel cpu on a gateway 4800-05e I am not quite sure how to determine the actual network adapter. This is a wired adapter. I suppose worst case I can try another adapter if this keeps happening.

  Read the article

• Lion MacBook Pro will not load webpages with DNS just after wake

  - by NReilingh

  I'm working with a 2011 MacBook Pro running Lion (10.7.2), that after waking from sleep (i.e. opening the lid) takes an inordinately long amount of time (2-3 minutes or more) to get a usable internet connection. Upon waking, the wi-fi icon signifies it is negotiating a network connection, and completes one a few seconds later. At this point, network diagnostics will not show any issues, and everything in Network preferences looks as normal: I'm connected to the proper network, have the right IP address and gateway, and DNS settings are correct. However, any site accessed with a domain name (like http://www.google.com) in Safari will return the "You are not connected to the Internet." error. Accessing a site directly, say, with Google's 74.125.226.212, is successful. Yet, Network Diagnostics will insist that DNS is functioning properly. After a few minutes, the following lines will be printed to the Console log, and regular behavior will be restored. 11/18/11 8:11:31.288 PM airportd: _doAutoJoin: Already associated to “Wireless”. Bailing on auto-join. 11/18/11 8:11:32.000 PM kernel: en1: BSSID changed to 00:25:9c:63:91:bd This behavior occurs only when waking from sleep--not when turning wi-fi on and off. This problem also occurs when using a wired Ethernet connection. As per this thread, I have tried flushing the DNS cache and wiping the wireless network from memory (it's not a protected network). Neither have worked.

  Read the article

• Syncing Google Desktop Scratch Pad

  - by Anders Frey

  I'm a long time user of Google Desktop Scratch Pad and I would like to be able to put the note in the cloud and make it accessible from all my electronic units. I'm working towards changing the filepath Scratch Pad uses to retrieve the .txt to lead to a DropBox folder. As the Desktop Scratch Pad is discontinued I've had no luck in retrieving the API, but what I've got so far is this: The scratch pad data is located at: C:\Users[user]\AppData\Local\Google\Google Desktop\a3d83d5fa2e9\scratchpad.txt The registry keys related to Google Desktop is located at: HKEY_CURRENT_USER\Software\Google\Google Desktop I'm guessing the Scratch Pad app itself is located at: HKEY_CURRENT_USER\Software\Google\Google Desktop\Components I have limited experience with the registry, so I'm not able to translate the binary and hexadecimals, but I'm hoping that the path location is in there somewhere. I've tried using a bunch of other noteapps (including the 'new' scratch pad in chrome) but haven't been able to find one that suits my needs as Desktop Scratch Pad. Hence the effort in this matter. I may be way off and I'm not sure if this is possible to do, but I'm looking forward to hearing your thoughts.

  Read the article

• Nginx map module 301 redirecting

  - by Reinier Korth

  I've rebuild my website in Ruby on Rails and now I want to 301 redirect a lot of old urls using Nginx's http://wiki.nginx.org/HttpMapModule For some reason I can't get it to work. It works fine without the rewrite ^ $new permanent; line. Does anyone see what I'm missing? This my nginx.conf: server { server_name example.com; return 301 $scheme://www.example.com$request_uri; } # 301 redirect list map $uri $new { /test123 http://www.example.com/test123; /bla http://www.example.com/bladiebla; } server { server_name www.example.com; rewrite ^ $new permanent; root example/public; location ^~ /assets/ { gzip_static on; expires max; add_header Cache-Control public; } try_files $uri/index.html $uri @unicorn; location @unicorn { proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; proxy_pass http://unicorn-<%= application %>; } error_page 500 502 503 504 /500.html; client_max_body_size 4G; keepalive_timeout 10; }

  Read the article

• How to determine the root cause of a system lockup on Ubuntu 8.04 LTS?

  - by jdt141

  I'm currently working a project that involves setting up a PC/104 stack and running Ubuntu 8.04 LTS. We need to use the PC/104 stack because its an embedded application - and we're required to use a DeviceNet peripheral card to communicate to other devices. (DeviceNet is just a protocol on top of CAN.) Anyway, the following hardware is on the stack: Kontron MOPSPM104 with a 1GHz Intel Celeron processor ConnectTech FlashDrive/104 4GB Industrial Temp (-40 to +85 C) Woodhead (Molex) PC104DVNIO DeviceNet card A run of the mill 104 power supply The Kontron Board offers two serial ports, one VGA out, and two USB ports. The DeviceNet card is an ISA card. Because of this (per the User's Guide for the Kontron Board), I have manually set the IRQs in the BIOS to be appropriately configured, and turned off ACPI in both the BIOS and passed the appropriate flag in GRUB. I've installed Ubuntu 8.04 desktop, 32 bit. The problem that I'm having is that, from time to time, the entire 104 stack locks up. This only seems to happen in two cases, both of which we're running GNOME. We have a custom application that uses the DeviceNet card, and the system will lock up, or (more frequently) when we're running Firefox and either surfing for some information or trying to test it - typically by streaming video from a IP-camera. The reason I ask this questions is I cannot determine the root cause of this lockup. The IRQs appear to correctly configured in the BIOS and as the Kernel sees them, and nothing is logged to dmesg. If you all could help me determine the root cause of this lockup, I would greatly appreciate it. Thanks.

  Read the article

• Web browsing through SSH tunnel gets stuck/clogged

  - by endolith

  I use tools like Tunnelier to log into my home Tomato router through SSH, and then use it as a proxy for web browsing, tunnel for Remote Desktop/VNC, etc. Most days it works great, but some days every page I try to view gets stuck, like the tunnel is clogged. I load a web page and it seems to be loading, then stops, with the little loading icon spinning and nothing happening. I refresh the page, I reboot the router, I reboot the other computers on my home network and turn off any bandwidth-hogging services on them, I've turned on QoS on the router to prioritize SSH. I don't understand what's getting stuck. Rebooting or disconnecting/reconnecting the SSH tunnel improves responsiveness for a minute, but then it gets clogged again. It also seems to help if I don't do anything on the tunnel for a few minutes, then it will be responsive for a bit and then get clogged again. Trying to open a terminal console from Tunnelier is also unresponsive, so it's not just a web browsing problem. Likewise, connecting to http://192.168.1.1 in the browser (to the router's web config through its own tunnel) is also slow/laggy/halting. The realtime bandwidth reported by the router is nowhere near my DSL connection's limits, though it does show big spikes during the laggy times, and the connection is responsive when it shows low bandwidths. How do I troubleshoot something like this?

  Read the article

• Two hosts on same subnet can't see each other

  - by Joey Hewitt

  I've got two routers with two separate public IP addresses on the same subnet, but I can't get them to talk to each other. Both are connected to the internet (ISP-provided gateway) via Ethernet ports provided by the landlord, but I don't have access to or knowledge of how those are physically connected or the protocols used to get back to the ISP. I can ping either from the outside, but they can't ping each other. Traceroutes in and out look the same, and they receive the same gateway over DHCP. I can ping other IPs on the subnet, so I assume this is not any sort of intentional isolation for security/privacy. Since I'm in a setup where my landlord provides internet and we don't have contact with the ISP, I can't really ask the ISP for help (doubt the landlord would know much either.) The situation is similar to the diagram at this question, but instead of the two servers, there's another router coming off the (presumed) switch, and I don't have access to the switch. I've tried giving them static routes to each other with the ISP internet gateway as the gateway, but that's not working. One is a Linksys WRT54GL running DD-WRT, the other is a Netgear WGR614v7, although I could get something more capable if necessary. I'd like to keep them each connected directly to the ISP on their WAN ports, but I can have an ethernet cable between them if necessary - I'm wondering if there's a way without that, and if there isn't, I'd appreciate advice on how to get that working. Sorry this is so nitpicky; there are reasons for all the constraints, but they don't apply to the real question, so I left them out. ;) Thank you!

  Read the article

• Redirect port / port 10000 to https apache

  - by Hamid Elaosta

  I have been reading around and trying different configurations to get a request to my server on port 10000 to redirect a http to a https request. For some reason I can't figure out how to make it happen when i use port 10000 although i can set a rewrite rule for port 80 (implicit) to do it: All I want is a request as follows: http://127.0.0.1:10000 to redirect me to https://127.0.0.1:10000 but it needs to be written so that it also works when accessed via my domain name externally. My current, vhost, the last of many different attempts is currently set as follows, but it doesn't seem to work at all: <VirtualHost *:10000> RewriteEngine On RewriteCond %{HTTPS} off RewriteRule (.*) https://%{HTTP_POST}%{REQUEST_URI} ErrorLog "/var/log/httpd/webmin-redirect_error_log.log" CustomLog "/var/log/httpd/webmin-redirect_access_log.log" common </VirtualHost> I'v also tried a few other things but nothing seems to work, any help would be appreciated. EDIT: I already have a re-write in my httpd.conf that redirects port 80 to https. If I access port 10000 externally it is redirected to https, but from the lan "http://192.168.0.2:10000" it doesnt.

  Read the article

• How to limit SMTP delivery to hourly batches

  - by Jeremy W

  Moved over from StackOverflow. Sorry if you saw it there first In an effort to keep us from being labeled spammers by major ISPs (in addition to SPF records, privacy policies, CANSPAM compliance and the like) - I wanted to limit the amount of mail we send out an hour. Is this possible in W2K3 SMTP server? I was looking at outbound connection properties in the SMTP virtual server config screens...It's just not that clear if tinkering with those settings are going to do what I want. In a nutshell, I'd love mail being sent by this server to queue up and send for example, 5,000 messages every 10 minutes or so. Mail is being sent via ASP.Net. Also, I wouldn't be sending 1 million a day. Probably 30,000 tops - and doing that only a few times a month. I'm just trying to avoid a tidal wave of 30k going out in 1 minute and setting off every network spam monitoring alarm in North America. I know I could do it with a combination console app / scheduled job. My question was if there was an easier way to accomplish this with the Virtual SMTP Server settings on Win2k3 Is this possible?

  Read the article

• Motherboard Dying? AHCI Drive Init and boot loop intermittent failure

  - by Adam Heath

  My computer is now intermittently failing to boot up. For the last couple of days, when I turn it on it hangs on "AHCI Drive Init...", and when powered off and on again, it booted up fine. Today, it did the same but failed in a few other ways too, seemingly at random: Hangs on "AHCI Drive Init..." Boot loop (after "AHCI Drive Init..." appears for a split second (no drives listed)) Black screen (after "AHCI Drive Init..." appears for a split second, a black screen with all fans still running) The interesting part is that the above is not affected by what drives are connected, or what to. I have tried both disks, each disk individually and no disks (along with trying the primary and secondary SATA controllers), none of this has any effect on what happens. After about 20+ attempts of different combinations, it suddenly decided it would boot up into Windows, and I hadn't touched anything for about 2 cycles. Motherboard: Gigabyte GA-870A-USB3 Processor: Amd Phoenom II x6 1090T RAM: 8GB Corsair 1600 Primary Disk: Plextor 128GB SSD Secondary Disk: Western Digital Black 1TB OS: Windows 8.1 Is this my motherboard dying? Or could something else be the cause? Thanks!

  Read the article

< Previous Page | 483 484 485 486 487 488 489 490 491 492 493 494  | Next Page >