Search Results

Search found 23311 results on 933 pages for 'volume shadow service'.

Page 487/933 | < Previous Page | 483 484 485 486 487 488 489 490 491 492 493 494  | Next Page >

• XP can't read data from transferred HD

  - by Alexander Miller

  Computer A, running XP, died. XP was installed on a fresh HD in computer B. Slaved data-backup HD from A was installed as slave on B. B will not read it; shows only 2 folders, Recycler and System Volume Info. All of these are older machines with IDE drives. What's going on & how can I read/transfer the data from the transferred drive? This was only a trial run. Actually I will need to transfer the master HD from A - which has XP on it - and read from its data partition because (blush) the backup drive was not up to date.

  Read the article

• LVM mirroring VS RAID1

  - by syrenity

  Hi. Having learned a bit about LVM mirroring, I thought about replacing the current RAID-1 scheme I'm using to gain some flexibility. Problem is that according to what I found on the Internet, LVM is: 1) Slower then RAID-1, at least in reading (as only single volume being used for reading). 2) Non-reliable on power interrupts, and requires disk cache disabling for prevention of data loss. http://www.joshbryan.com/blog/2008/01/02/lvm2-mirrors-vs-md-raid-1/ Also it seems, at least to several setup guides I read (http://www.tcpdump.com/kb/os/linux/lvm-mirroring/intro.html), that one actually requires a 3rd disk for storing the LVM log. This makes the setup completely unusable on 2 disks installations, and lowers the amount of used mirror disks on higher amount of disks. Can anyone comment the above facts, and let me know his experience of using LVM mirroring? Thanks.

  Read the article

• Toshiba satellite u400 hardware buttons, which software?

  - by Kugel

  I've recently intalled Windows 7 64bit onto my Toshiba U400 laptop. I went over to toshiba support-download-drivers page and downloaded every driver that was missing. I chose not to download bloated stuff, only the drivers. Win7 has much better control over hardware buttons out of the box then I had before. But there is one thing that annoys me. I have hardware button on the laptom that is supposed to switch LEDs on/off. Windows 7 turns my sound on/off instead. The second minor thing is, when I turn off sound by pressing Fn+Esc (or light off button;-), the sound is off, however any slight touch with volume wheel turns it right back on! This is something that Ubuntu does also out of the box. I wonder what's the logic behind this. Any lightweight solutions to these out there? Thank you

  Read the article

• Looking to get a small server – need web, PHP, PostgreSQL.

  - by Javawag

  Hi all! I'm looking to get a cheap (low end) server to serve web pages (xHTML/PHP), but I also need to be able to set up PostGreSQL on the system too. Ideally the server would have low power consumption, run Linux (I prefer Mac OS X but a Mac Mini, although the size I'm looking for, is too much money!) and be around £100 (~$160US). EDIT: Just to make it clearer, I'm looking to purchase the server hardware myself – but I want something about Mac Mini sized. I don't want to pay for hosting! Also, quick question – if it's to serve web pages from my home (standard ISP connection, no static IP!), what do I need in place to get this working. I'm guessing I would sign up with some service like no-ip, and register a domain to point to my no-ip address (then install the no-ip software on the server to update that with the current IP). I know the idea of running a server behind a normal ISP connection isn't very elegant, but I'd prefer to have the server where I can see it then pay over the odds for a hosting service where I have little to no control over what happens. Also, I could write my own server software for apps/etc to connect to as well. Anyways I'm rambling! What do you guys think?! Javawag

  Read the article

• Shrinking physical volumes in LVM on a Linux Guest in ESXi 5.0

  - by Stew

  The problem: Linux guest (OpenSuse 12.1), with multiple virtual disks attached. 3 disks are in a logical volume, two of which are exactly 2TB. None of the disks are independent, and due to the backup software we use, cannot be independent. When the two 2TB virtual disks are "dependent", the snapshot fails stating that the file is too large for the datastore. When I put those two disks in independent mode, snapshots work fine (the other disk is 1.8TB). I have therefore concluded that even shrinking the two physical disks by 100GB should solve the problem, however I am having trouble conceptualizing how to go about getting those disks smaller without breaking the LVM entirely. The actual LV has 1.3TB free, so there is plenty of space to shrink with. What I need to accomplish: Deallocate 100GB from the two, 2TB virtual disks within the linux guest. Shrink the two virtual disks by 100GB within vsphere (not as complicated). Are there any vsphere/LVM gurus that can give me a clue?

  Read the article

• Exchange emails not delivering for one user

  - by Cylindric

  We have an Exchange infrastructure going through a migration from 2003 SP2 (call it ExOld) to 2010 (ExNew). All users are now on the new server, but mail is still being directed to ExOld until testing is complete. ExNew sends emails directly to the internet. For one particular user, emails don't seem to be being reliably delivered, but the odd thing is that it's not all emails. I can see external emails in his inbox. If I send an internal email it works fine. If I send an email from Gmail to him it doesn't get through. If I telnet from outside to ExOld I can send an email to him. If I telnet from outside to ExNew I can send an email to him. This is a transcript that results in a successful send: 220 ExOldName Microsoft ESMTP MAIL Service, Version: 6.0.3790.4675 ready at Mon, 22 Oct 2012 10:55:26 +0100 EHLO test.com 500 5.3.3 Unrecognized command EHLO test.com 250-ExOldFQDN Hello [MyTestExternalIp] 250-TURN 250-SIZE 250-ETRN 250-PIPELINING 250-DSN 250-ENHANCEDSTATUSCODES 250-8bitmime 250-BINARYMIME 250-CHUNKING 250-VRFY 250-X-EXPS GSSAPI NTLM LOGIN 250-X-EXPS=LOGIN 250-AUTH GSSAPI NTLM LOGIN 250-AUTH=LOGIN 250-X-LINK2STATE 250-XEXCH50 250 OK MAIL FROM:[email protected] 250 2.1.0 [email protected] OK RCPT TO:[email protected] notify=success,failure 250 2.1.5 [email protected] DATA 354 Start mail input; end with . Subject:Test 1056 Test 10:56 . 250 2.6.0 Queued mail for delivery quit 221 2.0.0 ExOldFQDN Service closing transmission channel Emails go through Symantec Cloud, but their "Track and Trace" shows the messages going through, with a "delivered ok" log entry. 2012-10-22 09:19:56 Connection from: 209.85.212.171 (mail-wi0-f171.google.com) 2012-10-22 09:19:56 Sending server HELO string:mail-wi0-f171.google.com 2012-10-22 09:19:56 Message id:CAE5-_4hzGpY2kXFbzxu7gzEUSj5BAvi+BB5q1Gjb6UUOXOWT3g@mail.gmail.com 2012-10-22 09:19:56 Message reference: 135089759500000177171130001194006 2012-10-22 09:19:56 Sender: [email protected] 2012-10-22 09:19:56 Recipient: [email protected] 2012-10-22 09:20:26 SMTP Status: OK 2012-10-22 09:19:56 Delivery attempt #1 (final) 2012-10-22 09:19:56 Recipient server: ExOldIP (ExOldIP) 2012-10-22 09:19:56 Response: 250 2.6.0 Queued mail for delivery I'm not sure where to look on the old (or new) server for information as to where the mails are ending up.

  Read the article

• Enter network credentials as part of batch script

  - by Michael

  WinXP: I have several system services that are needed to run some machinery in my lab. The machine these services are running uses a lab login that has administrator rights. Our IS department, unfortunately, has it set up where at some point during the night the login "loses" the privilege level to start/stop these services. The account stays logged in, but the software controlling my hardware becomes unresponsive. In order to get things back up and running, I have to stop the system services and restart them. Because of the security settings, however, I have to re-enter the user password to start the service (even though the user was never logged out). That, I get the "This service cannot be started due to a logon failure" and I have to enter the password. What would be ideal is to have a batch script run before anyone gets into work that stops all of the necessary services, enters the user credentials when prompted, and then restarts them so that everything is ready for first shift to run. I assumed that using the Task Scheduler in Windows would work as it allows you to run batch files with a user's name and password, but this didn't seem to do the trick. With this setup I would arrive to find that all the services are stopped but not started again. (Presumably because the authentication failed.) The batch file is about as simple as it gets, all I have is: net stop "Service1" net stop "Serivce2" etc., then restart in reverse order based on dependency: net start "Service2" net start "Serivce1" What would it take to accomplish what I'm trying to do and restart the services?

  Read the article

• How can I install .NET framework 3.5 on XP machines without internet connection?

  - by EricSchaefer

  I want to install .NET framework 3.5 on a couple of machines that do not have internet access. If I install the "no internet access"-package it still wants to download something. How can I figure out what is missing? Are there other installation packages? Edit: I would present screenshots but I cannot upload anything from here and the shots would be in german. So I present only the text translated back to english... Installing the "full redistributable package": At the bottom of the license agreement page it display this text: Size of download file: 67 MB Appoximate download time: 2h 44min (56KBit/s) 18min (512KBit/s) It shows the text even if I installed Windows Installer 3.1. After agreeing it displays the "Download and Installation Status"-Dialog with a progress bar labeled "Download:" and Status: Connection to server attempted (try X of 5). Total Download Status: 56MB/67MB I tried it in a VM with no network connection. It tries 5 times while the progress bar shows progress. Later the progress bar is labeled "Installation:". Even later it reports problems during setup and provides two buttons "Send Report Later" and "Don't Send". Now here it comes: "Setup completed" and "Microsoft .NET Framework 3.5 has been deinstalled successfully." (Emphasis is mine) "It is recommended to install current service packs and security updates. More information at Windows Update (link)." Edit2: Installed Service Pack 3, but still no success.

  Read the article

• System user authentication via web interface [closed]

  - by donodarazao

  Background: We have one pretty slow and expensive satellite Internet connection that is shared in a network with 5-50 users. To limit traffic, users shall pay a certain sum of money per hour. Routing and traffic accounting on user basis is done by a opensuse 10.3 server. Login is done via pppoe, and for each connection, username, bytes_sent, bytes_rcvd, start_time, end_time,etc are written into a mysql database. Now it was decided that we want to change from time-based to volume-based pricing. As the original developer who installed the system a couple of years ago isn't available, I'm trying to do the changes. Although I'm absolutely new to all this, there is some progress. However, there's one point I'm absolutely stuck. Up to now, only administrators can access connection details and billing information via a web interface. But as volume-based prices are less transparent to users than time-based prices, it is essential that users themselves can check their connections and how much they cost via the web interface. For this, we need some kind of user authentication. Actual question: How to develop such a user authentication? Every user has a linux system user account. With this user name and password, connection to the pppoe-server is made by the client machines. I thought about two possibles ways to authenticate users: First possibility: Users type username and password in a form. This is then somehow checked. We already have to possibilities to change passwords via the web interface. Here are parts of the code: Part of the Perl script the homepage is linked to: #!/usr/bin/perl use CGI; use CGI::Carp qw(fatalsToBrowser); use lib '../lib'; use own_perl_module; my @error; my $data; $query = new CGI; $username = $query->param('username') || ''; $oldpasswd = $query->param('oldpasswd') || ''; $passwd = $query->param('passwd') || ''; $passwd2 = $query->param('passwd2') || ''; own_perl_module::connect(); if ($query->param('submit')) { my $benutzer = own_perl_module::select_benutzer(username => $username) or push @error, "user not exists"; push @error, "your password?!?" unless $passwd; unless (@error) { own_perl_module::update_benutzer($benutzer->{id}, { oldpasswd => $oldpasswd, passwd => $passwd, passwd2 => $passwd2 }, error => \@error) and push @error, "Password changed."; } } Here's part of the sub update_benutzer in the own_perl_module: if ($dat-{passwd} ne '') { my $username = $dat-{username} || $select-{username}; my $system = "./chpasswd.pl '$username' '$dat-{passwd}'" . (defined($dat-{oldpasswd}) ? " '$dat-{oldpasswd}'" : undef); my $answer = $system; if ($? != 0) { chomp($answer); push @$error, $answer || "error changing password ($?)"; Here's chpasswd.pl: #!/usr/bin/perl use FileHandle; use IPC::Open3; local $username = shift; local $passwd = shift; local $oldpasswd = shift; local $chat = { 'Old Password: $' => sub { print POUT "$oldpasswd\n"; }, 'New password: $' => sub { print POUT "$passwd\n"; }, 'Re-enter new password: $' => sub { print POUT "$passwd\n"; }, '(.*)\n$' => sub { print "$1\n"; exit 1; } }; local $/ = \1; my $command; if (defined($oldpasswd)) { $command = "sudo -u '$username' /usr/bin/passwd"; } else { $command = "sudo /usr/bin/passwd '$username'"; } $pid = open3(\*POUT, \*PIN, \*PERR, $command) or die; my $buffer; LOOP: while($_ = <PERR>) { $buffer .= $_; foreach (keys(%$chat)) { if ($buffer =~ /$_/i) { $buffer = undef; &{$chat->{$_}}; } } } exit; Could this somehow be adjusted to verify users, but not changing user passwords? The second possibility I see: all pppoe connections are logged in the mysql database. If I could somehow retrieve the username (or uid) of the user connected by pppoe, this could be used to authenticate users. Users could only check their internet connections and costs when they are online (and thus paying money), but this could be tolerated. Here's a line of the script that inserts connections into the database: my $username = $ENV{PEERNAME}; I thought it would be easy to use this variable, but $username seems to be always empty in test-scripts (print $username). Any idea how to retrieve the user connected to the pppoe server? Sorry for the long question! Any help would be very much appreciated. :)

  Read the article

• Windows XP, USB-Stick and multiple Partitions

  - by Bobby

  Hello. I've got an USB-Stick with multiple Partitions on it (FAT32 (active), FAT32, Ext2 <-- that's another story) and it seems like that my Windows XP can only mount the first partition of the stick. If I try to mount the second one using the volume manager it tells me that I need to make it active and reboot...is it really that limited or am I just missing something here? Partitions: FAT32, System Rescue CD, bootable and active FAT32, some tools ext2, some data (I know that I need extra drivers etc., but that's not asked here. Edit (Solution): Thanks to the answer with the RMB (ReMoveable Bit) I was able to dig up a solution described at this site (Section: On flash drive only the first partition works). Basically, there's an Hitachi Driver available which filters the RMB on Driver-Level, which just needs to be a little modified to function with basically every USB-Stick. All you need to do is adding the "Device Instance ID" to the driver and then use this driver.

  Read the article

• Capture documents in bitonal, or grayscale then downsample

  - by Jason R. Coombs

  I'm about to embark on a document archival process. I'm going to spend a lot of good money to archive some paper (actually microfiche) to TIFF images. I have a choice of 300-dpi bitonal (2-bit, black/white) or 300-dpi grayscale (8-bit). Cost is the same for either format. Data volume (and thus image size) is not a factor. It seems to me that the grayscale, since scanned at the same resolution as the bitonal, would always contain more information and could always be downsampled to the equivalent bitonal image. Are there any downsides to selecting grayscale, and then later downsampling to bitonal if desired? In other words, is it possible that the scanning software will perform a more accurate (or more legible) representation than a grayscale image converted to bitonal?

  Read the article

• PHP application failed to connect after a network plugged back in

  - by tntu

  My data-center appears to have had some issues with their network and thus my server has suffered from on an off network connectivity for about an hour. After the connection has been completely re-established my code still kept reporting the same issue over and over until I have restarted the service. The code is a simple PHP code that loops forever checking the Apple feed-back server and then sleeps for a few minutes and then it begins all over again. Now I understand the error being generated if the network is down but once it got back up why did it continue until I have restarted the code? Does PHP have something that needs to be re-initialized or something?? Messges log: Dec 20 08:57:22 server kernel: r8169: eth0: link down Dec 20 08:57:28 server kernel: r8169 0000:06:00.0: eth0: link up Dec 20 08:57:29 server kernel: r8169: eth0: link down Dec 20 08:57:33 server kernel: r8169 0000:06:00.0: eth0: link up Dec 20 08:57:33 server kernel: r8169: eth0: link down Dec 20 08:57:37 server kernel: r8169 0000:06:00.0: eth0: link up Dec 20 08:57:38 server kernel: r8169: eth0: link down Dec 20 08:57:44 server kernel: r8169 0000:06:00.0: eth0: link up Dec 20 08:57:44 server kernel: r8169: eth0: link down Dec 20 08:57:52 server kernel: r8169 0000:06:00.0: eth0: link up Dec 20 08:57:52 server kernel: r8169: eth0: link down Dec 20 09:10:58 server kernel: r8169 0000:06:00.0: eth0: link up PHP Error: PHP Warning: stream_socket_client(): php_network_getaddresses: getaddrinfo failed: Name or service not known in /home/push/feedback.php on line 36 Code Line 36: $apns = stream_socket_client('ssl://feedback.sandbox.push.apple.com:2196', $errcode, $errstr, 60, STREAM_CLIENT_CONNECT, $stream_context);

  Read the article

• Raid on ICH9R chip set

  - by user500982

  Hi Im looking at buyign this MB: http://www.supermicro.com/products/motherboard/ATOM/ICH9/X7SPE-HF-D525.cfm Im wondering though if the chipset will support the raid configuration I need. Im looking to configure the following arrays: raid array 1: 2 2TB Disks in Raid 0 raid array 2: 2 2TB Disks in Raid 0 raid array 3 (not actualy an array): 1 300GB Disk not in raid, to be used for OS and boot. So in total there would be 5 drives and the board supports 6. so im good when it comes to connections. However I have herd some chip sets only support one raid array (volume). so either all drives are individual, or are in the array. I must have 2 sperate raid arrays independent of each other, and a 5th drive not in any array. Anybody know if this setup will work? Thanks, -Stewart

  Read the article

• Manual NAT on Checkpoint (Redirect all http requests to a local web server)

  - by kulakli

  Hi, We have a proxy server in internal network and I want to redirect all internet http requests to a web server in local network. It'll be like a Network Billboard that say "No direct connection is available. Set up your proxy etc." For example: A user starts the computer Opens the browser Trys to open www.google.com Should see web server output on local network Trys another web site on internet Should see web server output on local network Sets up proxy Trys to connect to a web site Web site should be loaded I have added a simple manual NAT rule to address translation in Checkpoint firewall but it simply does not work. Here is my address translation rule Source Destination Service T.Source T.Destination T.Service MY_PC A_GOOGLE_IP ALL ORIGINAL INT_WEB_SRV ORIGINAL Then when I ping A_GOOGLE_IP, replies come from INT_WEB_SRV, as I expected. However, when I try to connect A_GOOGLE_IP from browser (http://A_GOOGLE_IP), No replies come from SYN_SENT and falls into timeout. When I look at the firewall log of INT_WEB_SRV, I can see the incoming connection requests from MY_PC is accepted and NO denies. By the way, there is no problem to see INT_WEB_SRV (http://INT_WEB_SRV) from browser. My understanding is, my nat rule at checkpoint NGX R60 does not include return packets. I definitely need some help. Regards, Burak

  Read the article

• Cronjob not Running

  - by Pete Herbert Penito

  I have a bash script that looks like this: #!/bin/sh PID=`ps faux | grep libt | awk 'NR==2{print $2}'` STATUS=`ps faux | grep libt | awk 'NR==2{print $1}'` if [ "$STATUS" = "ec2-user" ]; then echo "libt already killed" else sudo kill $PID echo "libt was killed" fi sleep 5 cd /home/ec2-user/libt sudo ./libt I have saved this file as restart.sh and when I run it like ./restart.sh, it does what its supposed to (kills the libt process and restarts it). However, now I am trying to automate the process by using cron. So I made a cron job that I want to run every 6 hours that looks like this 0 */6 * * * /home/ec2-user/restart.sh When I run "crontab -l" I can see this print so I know it's been added properly. I should mention that the service does not have the ability to be restarted, (like "service ... restart") the process ID needs to be found, killed and then the start script needs to be ran. I have found that this cronjob is not working, I'll log onto the box and I can tell by looking at the logs that no restart has occurred. What am I doing wrong? What can I do to troubleshoot? Any advice would help, this is my first cron job :) Thanks!

  Read the article

• Not able to safely remove external disk after having mounted and unmounted a VHD on it

  - by Agnel Kurian

  I am using Windows 7 SP 1. I have an external hard disk (Seagate 500GB) which I am able to use without problems most of the time. I am able to plug it in, use it and then safely unmount it via the "Eject USB Mass Storage Device" option in the taskbar tray. However, if I attach a VHD file located on this disk using "Disk Management", then detach the VHD and finally try to safely disconnect the disk via the system tray, I get an error which says: "Problem Ejecting USB Mass Storage Device: Windows can't stop your 'Generic volume' device because a program is still using it. Close any programs that might be using the device, and then try again later." How do I avoid this problem? Which process could still be accessing the device (even after I have closed the "Disk Management" application) ?

  Read the article

• Iptables ignoring a rule in the config file

  - by Overdeath

  I see lot of established connections to my apache server from the ip 188.241.114.22 which eventually causes apache to hang . After I restart the service everything works fine. I tried adding a rule in iptables -A INPUT -s 188.241.114.22 -j DROP but despite that I keep seeing connections from that IP. I'm using centOS and i'm adding the rule like thie: iptables -A INPUT -s 188.241.114.22 -j DROP Right afther that I save it using: service iptables save Here is the output of iptables -L -v ` Chain INPUT (policy ACCEPT 120K packets, 16M bytes) pkts bytes target prot opt in out source destination 0 0 DROP all -- any any lg01.mia02.pccwbtn.net anywhere 0 0 DROP all -- any any c-98-210-5-174.hsd1.ca.comcast.net anywhere 0 0 DROP all -- any any c-98-201-5-174.hsd1.tx.comcast.net anywhere 0 0 DROP all -- any any lg01.mia02.pccwbtn.net anywhere 0 0 DROP all -- any any www.dabacus2.com anywhere 0 0 DROP all -- any any 116.255.163.100 anywhere 0 0 DROP all -- any any 94.23.119.11 anywhere 0 0 DROP all -- any any 164.bajanet.mx anywhere 0 0 DROP all -- any any 173-203-71-136.static.cloud-ips.com anywhere 0 0 DROP all -- any any v1.oxygen.ro anywhere 0 0 DROP all -- any any 74.122.177.12 anywhere 0 0 DROP all -- any any 58.83.227.150 anywhere 0 0 DROP all -- any any v1.oxygen.ro anywhere 0 0 DROP all -- any any v1.oxygen.ro anywhere Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 186K packets, 224M bytes) pkts bytes target prot opt in out source destination `

  Read the article

• Syntax error on line 494 of httpd.conf: Cannot load .../php5apache2_2.dll into server

  - by pikachu

  I have been learning PHP. I had installed Apache-server (not in a combination-suite like USBWebserver). Now I'm trying to put my sites on a portable stick, using USBWebserver. I already used that program before to carry MySQL databases with me (and Apache worked as well, cause I used the included PHPMyAdmin for managing the databases.), but now it doesn't work anymore. When I start the program, I keep having the text saying Apache is offline. I've tried to open Apache using the command line (don't know what that would do, but, it's just a try). I got an error message saying Syntax error on line 494 of C:/.../httpd.conf: Cannot load C:/.../php5apache2_2.dll into server: (The following is translated from Dutch) An initialization routine of the dynamic link library (dll-file) has failed. Line 494 says this: LoadModule php5_module "C:/Users/School/Downloads/USBWebserver v8_en/php/php5apache2_2.dll" My first Apache installation (its service) is not running. The ports are different. And I also uninstalled the service (using the httpd.exe -k uninstall command); What can be the problem? Thanks for help.

  Read the article

• What are the keyboard shortcuts to operate a Mac slider control

  - by doekman

  In the Safari RSS screen, there is a slider (or range) control to change an article's summary length. By pressing TAB a couple of times, it is possible to navigate to this control, without using the mouse. Is it also possible, to slide the slider with the keyboard? Thus sliding the knob to the right and left? The volume slider in iTunes can be operated by the arrow-keys, but in Safari's RSS window, these are used to scroll the text if there are any scrollbars... Note: in System Preferences, Keyboard (OS X 10.6), Keyboard Shortcuts, I have set Full Keyboard Access to All controls. Otherwise, the TAB key only navigates between text boxes and lists.

  Read the article

• High availability virtual machines

  - by Jeremy

  I've been reading a lot about high availability virtualization, either via Hyper-V or VMWare. In that context, essentially high availabliity means that the VM is hosted by a closter of physical servers (nodes), so if one of the physical servers goes down, the VM can still be served by other physical servers. So far so good, the physical cluster and the VM itself are highly available. However if the service being provided, let's say SQL server, MSDTC, or any other service, are actually being provided by the VM image and the virtualized operating system. So I imagine that there is still a point of failure at the virtual layer that isn't accounted for. Something could happen within the virtual machine itself that the physican cluster can not account for, correct? In that instance the physican failover cluster (Hyper-V) or VMWare host, can not fail over, because the issue is not with one of the servers in the physical cluster - failing over a physical node would not do any good. Does this necessitate building a virtual failover cluster on top of the physical one, or is this not necessary? Alternatively, I suppose you could skip the phsyical clustering, and just cluster at the virtual layer (Child based failover clustering), because that should still survive a physical failure. See image below showing parent based (left), child based (right) and a combination (center). Is parent based as far as you need to go, or is child based more appropriate?

  Read the article

• How to remove large number of files/folders in linux

  - by user1745713

  We are using hadoop to split a table into smaller files to feed to mahout, but in the process, we created a huge amount of _temporary logs. we have an nfs mount for the hadoop volume so we can use all the linux commands to delete folders files, but we just can't get them to be deleted, here's what I've tried so far: hadoop fs -rmr /.../_temporary : hangs for hours and does nothing on nfs mount: rmr -rf /.../_temporary :hangs for hours and does nothing find . -name '*.*' -type f -delete : same as above the folders look like this (38 of these folders inside _temporary): drwxr-xr-x 319324 user user 319322 Oct 24 12:12 _attempt_201310221525_0404_r_000000_0 the content of these are actually folders, not files. each one of those 319322 folders has exactly one file inside. not sure why the do the logging this way. Any help is appreciated.

  Read the article

• How can I prevent a Windows laptop from making noise when starting up?

  - by Walkerneo

  I have a Windows 7 laptop here that makes a noise each time it starts up. I know I can disable that noise now that I'm logged on, but how could I have prevented it WHILE logging on? I remember that there was one of the function keys (F8?) that would allow you to boot into safe mode, but is there a key that will stop the startup sound? Imagine, for example, having your laptop in the library when you know the volume is all the way up - how could you log into your computer without disturbing everyone else?

  Read the article

• Audio input problem in Ubuntu 9.10

  - by Andrea Ambu

  My audio input is a mix of my mic output and my sound card output. I'd like it to be just my mic output. I was able to do so in Ubuntu 9.04 but the interface is 9.10 is totally changed and I tried every my creativity was able to think. It's really annoying when talking to other people over the internet because they keep hearing their voice back. I'm not sure I explained it in clear way so I'll give you an example: What I do: I put an mp3 on play or a video on youtube then open a recorder and start to talk on my mic. What happens: both my voice and audio from mp3/youtube get reordered, even if I put headphones volume to 0 (via hardware). What I'd like to happen: Only my voice should be recorded. I'm sure I'm missing some technical term, but that's the problem and I'd like to solve it in Ubuntu 9.10, any idea?

  Read the article

• scp to remote servers stalls, unable to isolate cause

  - by Rolf

  When I copy a large file (100+mb) to a remote server using scp it slows down from 2.7 mb/s to 100 kb/s and downward and then stalls. The problem is that I can't seem to isolate the problem. I've tried 2 different remote servers, using 2 local machines (1 osx, 1 windows/cygwin), using 2 different networks/isps and 2 different scp clients. All combinations give the problem except when I copy between the two remote servers (scp). Using wireshark I could not detect any traffic volume that would congest the network (although about 7 packets/sec with NBNS requests from the osx machine). What in the world could be going on? Given the combinations I've used there doesn't seem to be any overlap in the thing that could be causing the trouble.

  Read the article

• Strange Intermittent Background Sound in Windows 7

  - by NoCarrier

  Ok, this is very strange. Recently, i noticed that every 10-15 seconds, there would be this faint, annoying duh-dum sound coming out of my speakers. (hard to describe. sounds somewhat like the sound windows makes when you unplug a USB device, but not as pronounced and much quieter). I closed every app and ended as many processes as I could, but the sound persists. I look at the volume mixer and sure enough, when the sound occurs, there is a little spike in the level under "System Sounds". I haven't installed any hardware or software in the last several weeks. This started recently - completely out of the blue. Does anyone have any insight?

  Read the article

< Previous Page | 483 484 485 486 487 488 489 490 491 492 493 494  | Next Page >