Search Results

Search found 16208 results on 649 pages for 'pass community'.

Page 488/649 | < Previous Page | 484 485 486 487 488 489 490 491 492 493 494 495  | Next Page >

• Dual boot Ubuntu and Windows 7, I Can only boot ubuntu through recovery mode

  - by Alec

  I want to become a new user of Ubuntu, however this problem is preventing me. I have/had Window 7 professional on my computer. I recently looked into getting linux. I discovered dual-booting and decided to give it a try. First I created a bootable flash drive with ubuntu 12.10 64 bit. I then followed the instructions on: https://help.ubuntu.com/community/WindowsDualBoot after I finished going through the setup, my computer rebooted. After the reboot I was able to select Ubuntu, advanced options for Ubuntu, 2 memory tests, and windows 7 (loader). So I chose Windows ( honestly i was more concerned that i still had everything on windows at this point). I then rebooted again and selected Ubuntu. When i selected Ubuntu, the background screen of Grub (the crimson/burgandy color) stayed for a few seconds then the screen went black: video here http://www.youtube.com/watch?v=6kKcG4sT7Lg&feature=plcp I tried again with the same results. so i redid the ubuntu install differently using http://www.liberiangeek.net/2012/10/dual-booting-windows-7-and-ubuntu-12-10-quantal-quetzal/. After rebooting the same thing happened. After that i was stumped, so i figured it could hurt to experiment. after all i backed up my windows 7 stuff, and i have the software disk. I tried booting in recovery mode under "advanced options for Ubuntu" and sure enough, after selecting continue to normal reboot it worked. So i updated and everything but when i rebooted it still wouldn't boot under Ubuntu. It would always boot after recovery mode. So i try installing 12.10 32 bit Ubuntu. the same problem keeps happening. I can still get to Ubuntu through recovery mode. so i went online and tried using the terminal (in ubuntu that i booted through recovery mode) when i was using it i discovered that "Error in sitecustomize; set PYTHONVERBOSE for traceback: EOFError: EOF read where not expected" kept showing up. also i noticed a notification in the top right corner that looked like a do not enter sign. it said "an error occured, please run package manager from the right-click menu or apt-get in a terminal to see what is wrong. the error message was: 'ror in sitecustomize;set PYTHONVERBOSE for traceback: EOFError: EOF read where not expected traceback (most recent called last): File "/usr/bin/lsb_release EOFError: EOF read where not expected 39;0' this usually means that your installed packages have unmet dependencies" Naturally i assumed this was what was causing my boot problems. I downloaded synaptic and updated everything and the error went away. but my boot problem was still a problem. so i go online find some things that have worked for others, like this Try to do this (in your terminal: sudo nano /etc/default/grub Look for: GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" Change it too : GRUB_CMDLINE_LINUX_DEFAULT="quiet" And update Grub: sudo update-grub This should fix stuff.) I did this and i still have the problem. sorry for the excessive explanation, please help.

  Read the article

• InfiniBand Enabled Diskless PXE Boot

  - by Neeraj Gupta

  When you want to bring up a compute server in your environment and need InfiniBand connectivity, usually you go through various installation steps. This could involve operating systems like Linux, followed by a compatible InfiniBand software distribution, associated dependencies and configurations. What if you just want to run some InfiniBand diagnostics or troubleshooting tools from a test machine ? What if something happened to your primary machine and while recovering in rescue mode, you also need access to your InfiniBand network ? Often times we use opensource community supported small Linux distributions but they don't come with required InfiniBand support and tools. In this weblog, I am going to provide instructions on how to add InfniBand support to a specific Linux image - Parted Magic.This is a free to use opensource Linux distro often used to recover or rescue machines. The distribution itself will not be changed at all. Yes, you heard it right ! I have built an InfiniBand Add-on package that will be passed to the default kernel and initrd to get this all working. Pr-requisites You will need to have have a PXE server ready on your ethernet based network. The compute server you are trying to PXE boot should have a compatible IB HCA and must be connected to an active IB network. Required Downloads Download the Parted Magic small distribution for PXE from Parted Magic website. Download InfiniBand PXE Add On package. Right Click and Download from here. Do not extract contents of this file. You need to use it as is. Prepare PXE Server Extract the contents of downloaded pmagic distribution into a temporary directory. Inside the directory structure, you will see pmagic directory containing two files - bzImage and initrd.img. Copy this directory in your TFTP server's root directory. This is usually /tftpboot unless you have a different setup. For Example: cp pmagic_pxe_2012_2_27_x86_64.zip /tmp cd /tmp unzip pmagic_pxe_2012_2_27_x86_64.zip cd pmagic_pxe_2012_2_27_x86_64 # ls -l total 12 drwxr-xr-x  3 root root 4096 Feb 27 15:48 boot drwxr-xr-x  2 root root 4096 Mar 17 22:19 pmagic cp -r pmagic /tftpboot As I mentioned earlier, we dont change anything to the default pmagic distro. Simply provide the add-on package via PXE append options. If you are using a menu based PXE server, then add an entry to your menu. For example /tftpboot/pxelinux.cfg/default can be appended with following section. LABEL Diskless Boot With InfiniBand Support MENU LABEL Diskless Boot With InfiniBand Support KERNEL pmagic/bzImage APPEND initrd=pmagic/initrd.img,pmagic/ib-pxe-addon.cgz edd=off load_ramdisk=1 prompt_ramdisk=0 rw vga=normal loglevel=9 max_loop=256 TEXT HELP * A Linux Image which can be used to PXE Boot w/ IB tools ENDTEXT Note: Keep the line starting with "APPEND" as a single line. If you use host specific files in pxelinux.cfg, then you can use that specific file to add the above mentioned entry. Boot Computer over PXE Now boot your desired compute machine over PXE. This does not have to be over InfiniBand. Just use your standard ethernet interface and network. If using menus, then pick the new entry that you created in previous section. Enable IPoIB After a few minutes, you will be booted into Parted Magic environment. Open a terminal session and see if InfiniBand is enabled. You can use commands like: ifconfig -a ibstat ibv_devices ibv_devinfo If you are connected to InfiniBand network with an active Subnet Manager, then your IB interfaces must have come online by now. You can proceed and assign IP address to them. This will enable you at IPoIB layer. Example InfiniBand Diagnostic Tools I have added several InfiniBand Diagnistic tools in this add-on. You can use from following list: ibstat, ibstatus, ibv_devinfo, ibv_devices perfquery, smpquery ibnetdiscover, iblinkinfo.pl ibhosts, ibswitches, ibnodes Wrap Up This concludes this weblog. Here we saw how to bring up a computer with IPoIB and InfiniBand diagnostic tools without installing anything on it. Its almost like running diskless !

  Read the article

• 12.04 installation started to black screen during boot today

  - by Cedric

  NOTE: Most of this question is now irrelevant. UPDATE 3 summarizes the problem as it stands. I've been running 12.04 on my Lenovo laptop for one month now (updated from 11.04), and I have not had any significant problem until today. This morning, when I boot, I pass the Grub screen, then I get to the purple loading screen with dots as usual, then for some reason I got to the terminal login, with no GUI. startx gives me a black screen. Ctrl+F7-F8 didn't help either. It's similar to: After the update today no graphical interface anymore - 12.04 I followed the instructions at the end, to flush the ATI drivers (which I had installed), and fall back to the community drivers. That made me lose the login! Now I just get a black screen after the Ubuntu loading screen. I can still access the console through recovery, and I've gotten into VESA mode once or twice (not reproducible, for some reason). I've tried various permutations of xorg.conf, without success. Xorg -configure fails for now, though I might be able to get it to work. apt-get update/upgrade doesn't improve anything either. However, both Windows and the 12.04 Live CD still work beautifully, and I know that all my data is still there. Is there any way that I could somehow take the configuration from the Live CD and roll with it? I know that I could reinstall, but that sucks, frankly, especially given that there's no straight-forward way of keeping the home (which, incidentally, is unaccessible from the Live CD) Thank you. Update: it seems that the fglrx drivers are still active, even after I've --purged them. From Xorg.0.log: [ 18.235] (WW) fglrx(0): *********************************************************** [ 18.235] (WW) fglrx(0): * DRI initialization failed * [ 18.235] (WW) fglrx(0): * kernel module (fglrx.ko) may be missing or incompatible * [ 18.235] (WW) fglrx(0): * 2D and 3D acceleration disabled * [ 18.235] (WW) fglrx(0): *********************************************************** [ 18.235] Fatal server error: [ 18.235] AddScreen/ScreenInit failed for driver 0 There's also a mention of the "fbdev" module. What is it? PARTIALLY SOLVED: I've undone the damage from the fglrx purge. I'm still mystified as to why uninstalling the packages didn't kill fglrx entirely, but I've now recovered the prompt. The solution to the DRI initialization error was to add radeon.modeset=0 to the GRUB boot options. So I'm back to being dropped to a prompt without any GUI. startx gives me a bunch of messages, though no obvious errors. I have little reason to suspect the video drivers, as they worked fine before today. There is no apparent error message in any of the log files. UPDATE: When I startx, I get an error, Plymounth command failed mountall: Disconnected from Plymouth This is all over the Internet, but I have not found anything that works for me yet. UPDATE 3: If I press ESC during boot, the splash screen (Plymouth!) disappears, and I no longer have any error from Plymouth. The last error message is: Stopping mount filesystems on boot I can then Ctrl+Alt+F1 to get the TTY1, but startx still does not work. Sadly, the Internet knows nothing about this error message, and neither do I. Help!

  Read the article

• How to create a Global Rule that stores a document’s folder path in a custom metadata field

  - by Nicolas Montoya

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} How to create a Global Rule that stores a document’s folder path in a custom metadata field Efficiency purists would argue that redundancy is not necessary. In real life, we are willing to pay a price for performance –i.e. to have information at our fingertips. We have run into customers opting to store a document folder path as a document metadata field. They have their reasons, half of the ECM community will agree with them, and the other half would raise an eye brow. In the end, they are getting creative to achieve their document management goals. The below steps outlines how to create a Global Rule that would store a document’s folder path in a custom metadata field: Create a Global Rule via Configuration Manager > Rules Tab > Add Then check “Is global rule with priority”. Then check “Use rule activation condition”. The go to “Edit” and check the actions for this Script Properties: Then click OK, and the following rule activation condition will appear: Then Goto to the Fields Tab and add a Rule Field: Select the target Custom Metadata Field and click Ok, then check the “Is derived field”, then “Edit”, then go to the Custom Tab in the Script Properties window and enter the below custom script: <$if #active.dCollectionPath$> <$dprDerivedValue=#active.dCollectionPath$> <$else$> <$dprDerivedValue=#active.xCollectionIDPath$> <$endif$> For more information on the dCollectionPath property, check Section 8.2 Folder Services from the Oracle® Fusion Middleware Services Reference Guide for Oracle Universal Content Management 11g Release 1 (11.1.1) http://docs.oracle.com/cd/E21043_01/doc.1111/e11011/c08_folders002.htm The above rule will keep the Custom Metadata Field updated with the Folder Path information when a document is checked in via the Content Server (CS) Web Interface or the Desktop Integration Suite (DIS).

  Read the article

• Oracle Social Network and the Flying Monkey Smart Target

  - by kellsey.ruppel

  Originally posted by Jake Kuramoto on The Apps Lab blog. I teased this before OpenWorld, and for those of you who didn’t make it to the show or didn’t come by the Office Hours to take the Oracle Social Network Technical Tour Noel (@noelportugal) ran, I give you the Flying Monkey Smart Target. In brief, Noel built a target, about two feet tall, which when struck, played monkey sounds and posted a comment to an Oracle Social Network Conversation, all controlled by a Raspberry Pi. He also connected a Dropcam to record the winner just prior to the strike. I’m not sure how it all works, but maybe Noel can post the technical specifics. Here’s Noel describing the Challenge, the Target and a few other tidbit in an interview with Friend of the ‘Lab, Bob Rhubart (@brhubart). The monkey target bits are 2:12-2:54 if you’re into brevity, but watch the whole thing. Here are some screen grabs from the Oracle Social Network Conversation, including the Conversation itself, where you can see all the strikes documented, the picture captured, and the annotation capabilities: #gallery-1 { margin: auto;? } #gallery-1 .gallery-item { float: left; margin-top: 10px; text-align: center; width: 33%; } #gallery-1 img { border: 2px solid #cfcfcf; } #gallery-1 .gallery-caption { margin-left: 0; }    That’s Diego in one shot, looking very focused, and Ernst in the other, who kindly annotated himself, two of the development team members. You might have seen them in the Oracle Social Network Hands-On Lab during the show. There’s a trend here. Not by accident, fun stuff like this has becoming our calling card, e.g. the Kscope 12 WebCenter Rock ‘em Sock ‘em Robots. Not only are these entertaining demonstrations, but they showcase what’s possible with RESTful APIs and get developers noodling on how easy it is to connect real objects to cloud services to fix pain points. I spoke to some great folks from the City of Atlanta about extending the concepts of the flying monkey target to physical asset monitoring. Just take an internet-connected camera with REST APIs like the Dropcam, wire it up to Oracle Social Netwok, and you can hack together a monitoring device for a datacenter or a warehouse. Sure, it’s easier said than done, but we’re a lot closer to that reality than we were even two years ago. Another noteworthy bit from Noel’s interview, beginning at 2:55, is the evolution of social developer. Speaking of, make sure to check out the Oracle Social Developer Community. Look for more on the social developer in the coming months. Noel has become quite the Raspberry Pi evangelist, and why not, it’s a great tool, a low-power Linux machine, cheap ($35!) and highly extensible, perfect for makers and students alike. He attended a meetup on Saturday before OpenWorld, and during the show, I heard him evangelizing the Pi and its capabilities to many people. There is some fantastic innovation forming in that ecosystem, much of it with Java. The OTN gang raffled off five Pis, and I expect to see lots of great stuff in the very near future. Stay tuned this week for posts on all our Challenge entrants. There’s some great innovation you won’t want to miss. Find the comments. Update: I forgot to mention that Noel used Twilio, one of his favorite services, during the show to send out Challenge updates and information to all the contestants.

  Read the article

• New Training and Support Center Coming Soon!

  - by Ruth

  The CRM On Demand Training and Support Center is getting a face lift. In May 2010 we will unveil the new and improved layout, look and feel, and even some new content. Some of you told us loud and clear that you wanted an easier way to find our training courses and other important information. Well, here you are: Immediately you see the look and feel has changed and things have moved around a bit. You may ask, "How can I find the training catalog? Service requests? Downloads?" There are a few ways to find what you're looking for. You may use the search box to find training, quick guides, downloads, best practices, FAQs and more. You may also click the tabs or links in the blue bar, like Browse Training, to browse other documents and information. Here is a brief outline of the tabs and links that will help as you navigate this new tool: The Support tab provides alerts and notifications specific to your application environment. The Get Started tab is organized by role and contains links to resources aimed at helping you get the most out of your first 30 days with CRM On Demand. The Learn More tab outlines information in key topic areas, like administration, integration, and reports. Go to this tab to get the resources you need to move beyond the basics. The Release Information tab contains information specific to the current and upcoming releases of CRM On Demand. Access this tab to learn about and prepare for upgrades to your CRM On Demand application. The Best Practices tab contains a compilation of knowledge gained by experts that work with CRM On Demand day in and day out. Access this knowledge to benefit from their vast experience. The Communities tab offers connections to others in the CRM On Demand community through forums, communities, blogs, and more. The Browse training link opens the training catalog.Take a look at the instructor-led training, Webinars, quick guides, use cases, and tools available to you. The Browse Knowledge link takes you to our knowledge base where you can get answers to frequently asked questions. The Submit a Service Request link directs you to My Oracle Support where you can log a service request. The steps in that process have not changed. The Web Services Library provides simple APIs and a link to Oracle Sample Code where you can get samples that can help you build custom integrations. The Add-On Applications link allows access to our downloadable applications that allow you to extend the functionality of CRM On Demand. The Templates and Tools link provides access to resources that can help you design and build CRM On Demand to meet your company's specific needs. A lot has changed and I know it is a lot to take in. To help you out, we have a printable quick guide that you can use during this transition. As always, let us know what you think: [email protected].

  Read the article

• Play a New Random Game Each Day in Chrome

  - by Asian Angel

  Being able to unwind for a few moments each day can make the time pass so much better and help you feel refreshed. If your favorite method for relaxing is playing a quick game, then join us as we take a look at the Random Games from MyGiochi.net extension for Google Chrome. Random Games from MyGiochi.net in Action The really great thing about this extension is that each day you can have a new random game to play. If you love variety this is definitely going to be a perfect match for you. We got “Power Golf” as our random game of the day. Here is a look at things once we got started…this one can be a lot of fun to play. Time to move on to the third hole now… What if you want something different from the game available on any given day? In the upper right corner you will find links for “game categories” that you can look through (clicking on the links will open a new tab). Since the links are in Italian you might need to experiment a little bit to find the category that you want to browse through. We chose the “Games for Girls Category”. With Chrome’s new built in “Translation Bar” you can easily switch the page over to the language of your choice. Note: Translation Bar available in Dev Channel releases. Ready to choose a fun game to play! You really can have a lot of fun with the games available at My Giochi. With our “game of the day” we had a second option for other games to try. More games equals more fun! Conclusion If playing online games is your favorite way to relax then the MyGiochi.net extension will make a great addition to your browser. Have fun with all of those new games each day! Links Download the Random Games from MyGiochi.net extension (Google Chrome Extensions) Similar Articles Productive Geek Tips Geek Fun: Play Alien Arena the Free FPS GamePlay Avalanche!! in Google ChromeFriday Fun: Get Your Mario OnFriday Fun: Play Bubble QuodFriday Fun: 13 Days in Hell TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional How to Browse Privately in Firefox Kill Processes Quickly with Process Assassin Need to Come Up with a Good Name? Try Wordoid StockFox puts a Lightweight Stock Ticker in your Statusbar Explore Google Public Data Visually The Ultimate Excel Cheatsheet

  Read the article

• Measuring ASP.NET and SharePoint output cache

  - by DigiMortal

  During ASP.NET output caching week in my local blog I wrote about how to measure ASP.NET output cache. As my posting was based on real work and real-life results then I thought that this posting is maybe interesting to you too. So here you can read what I did, how I did and what was the result. Introduction Caching is not effective without measuring it. As MVP Henn Sarv said in one of his sessions then you will get what you measure. And right he is. Lately I measured caching on local Microsoft community portal to make sure that our caching strategy is good enough in environment where this system lives. In this posting I will show you how to start measuring the cache of your web applications. Although the application measured is built on SharePoint Server publishing infrastructure, all those counters have same meaning as similar counters under pure ASP.NET applications. Measured counters I used Performance Monitor and the following performance counters (their names are similar on ASP.NET and SharePoint WCMS): Total number of objects added – how much objects were added to output cache. Total object discards – how much objects were deleted from output cache. Cache hit count – how many times requests were served by cache. Cache hit ratio – percent of requests served from cache. The first three counters are cumulative while last one is coefficient. You can use also other counters to measure the full effect of caching (memory, processor, disk I/O, network load etc before and after caching). Measuring process The measuring I describe here started from freshly restarted web server. I measured application during 12 hours that covered also time ranges when users are most active. The time range does not include late evening hours and night because there is nothing to measure during these hours. During measuring we performed no maintenance or administrative tasks on server. All tasks performed were related to usual daily content management and content monitoring. Also we had no advertisement campaigns or other promotions running at same time. The results You can see the results on following graphic.   Total number of objects added   Total object discards   Cache hit count   Cache hit ratio You can see that adds and discards are growing in same tempo. It is good because cache expires and not so popular items are not kept in memory. If there are more popular content then the these lines may have bigger distance between them. Cache hit count grows faster and this shows that more and more content is served from cache. In current case it shows that cache is filled optimally and we can do even better if we tune caches more. The site contains also pages that are discarded when some subsite changes (page was added/modified/deleted) and one modification may affect about four or five pages. This may also decrease cache hit count because during day the site gets about 5-10 new pages. Cache hit ratio is currently extremely good. The suggested minimum is about 85% but after some tuning and measuring I achieved 98.7% as a result. This is due to the fact that new pages are most often requested and after new pages are added the older ones are requested only sometimes. So they get discarded from cache and only some of these will return sometimes back to cache. Although this may also indicate the need for additional SEO work the result is very well in technical means. Conclusion Measuring ASP.NET output cache is not complex thing to do and you can start by measuring performance of cache as a start. Later you can move on and measure caching effect to other counters such as disk I/O, network, processors etc. What you have to achieve is optimal cache that is not full of items asked only couple of times per day (you can avoid this by not using too long cache durations). After some tuning you should be able to boost cache hit ratio up to at least 85%.

  Read the article

• SQLUG Events - London/Edinburgh/Cardiff/Reading - Masterclass, NoSQL, TSQL Gotcha's, Replication, BI

  - by tonyrogerson

  We have acquired two additional tickets to attend the SQL Server Master Class with Paul Randal and Kimberly Tripp next Thurs (17th June), for a chance to win these coveted tickets email us ([email protected]) before 9pm this Sunday with the subject "MasterClass" - people previously entered need not worry - your still in with a chance. The winners will be announced Monday morning.As ever plenty going on physically, we've got dates for a stack of events in Manchester and Leeds, I'm looking at Birmingham if anybody has ideas? We are growing our online community with the Cuppa Corner section, to participate online remember to use the #sqlfaq twitter tag; for those wanting to get more involved in presenting and fancy trying it out we are always after people to do 1 - 5 minute SQL nuggets or Cuppa Corners (short presentations) at any of these User Group events - just email us [email protected] removing from this email list? Then just reply with remove please on the subject line.Kimberly Tripp and Paul Randal Master Class - Thurs, 17th June - LondonREGISTER NOW AND GET A SECOND REGISTRATION FREE*The top things YOU need to know about managing SQL Server - in one place, on one day - presented by two of the best SQL Server industry trainers!This one-day MasterClass will focus on many of the top issues companies face when implementing and maintaining a SQL Server-based solution. In the case where a company has no dedicated DBA, IT managers sometimes struggle to keep the data tier performing well and the data available. This can be especially troublesome when the development team is unfamiliar with the affect application design choices have on database performance.The Microsoft SQL Server MasterClass 2010 is presented by Paul S. Randal and Kimberly L. Tripp, two of the most experienced and respected people in the SQL Server world. Together they have over 30 years combined experience working with SQL Server in the field, and on the SQL Server product team itself. This is a unique opportunity to hear them present at a UK event which will:>> Debunk many of the ingrained misconceptions around SQL Server's behaviour >> Show you disaster recovery techniques critical to preserving your company's life-blood - the data >> Explain how a common application design pattern can wreak havoc in the database >> Walk through the top-10 points to follow around operations and maintenance for a well-performing and available data tier! Where: Radisson Edwardian Heathrow Hotel, LondonWhen: Thursday 17th June 2010*REGISTER TODAY AT www.regonline.co.uk/kimtrippsql on the registration form simply quote discount code: BOGOF for both yourself and your colleague and you will save 50% off each registration – that’s a 249 GBP saving! This offer is limited, book early to avoid disappointment.Wed, 23 JunREADINGEvening Meeting, More info and registerIntroduction to NoSQL (Not Only SQL) - Gavin Payne; T-SQL Gotcha's and how to avoid them - Ashwani Roy; Introduction to Recency Frequency - Tony Rogerson; Reporting Services - Tim LeungThu, 24 JunCARDIFFEvening Meeting, More info and registerAlex Whittles of Purple Frog Systems talks about Data warehouse design case studies, Other BI related session TBC Mon, 28 JunEDINBURGHEvening Meeting, More info and registerReplication (Components, Adminstration, Performance and Troubleshooting) - Neil Hambly Server Upgrades (Notes and Best practice from the field) - Satya Jayanty Wed, 14 JulLONDONEvening Meeting, More info and registerMeeting is being sponsored by DBSophic (http://www.dbsophic.com/download), database optimisation software. Physical Join Operators in SQL Server - Ami LevinWorkload Tuning - Ami LevinSQL Server and Disk IO (File Groups/Files, SSD's, Fusion-IO, In-RAM DB's, Fragmentation) - Tony RogersonComplex Event Processing - Allan MitchellMany thanks,Tony Rogerson, SQL Server MVPUK SQL Server User Grouphttp://sqlserverfaq.com"

  Read the article

• Welcome 2011

  - by WeigeltRo

  Things that happened in 2010 MIX10 was absolutely fantastic. Read my report of MIX10 to see why.   The dotnet Cologne 2010, the community conference organized by the .NET user group Köln and my own group Bonn-to-Code.Net became an even bigger success than I dared to dream of.   There was a huge discrepancy between the efforts by Microsoft to support .NET user groups to organize public live streaming events of the PDC keynote (the dotnet Cologne team joined forces with netug  Niederrhein to organize the PDCologne) and the actual content of the keynote. The reaction of the audience at our event was “meh” and even worse I seriously doubt we’ll ever get that number of people to such an event (which on top of that suffered from technical difficulties beyond our control).   What definitely would have deserved the public live streaming event treatment was the Silverlight Firestarter (aka “Silverlight Damage Control”) event. And maybe we would have thought about organizing something if it weren’t for the “burned earth” left by the PDC keynote. Anyway, the stuff shown at the firestarter keynote was the topic of conversations among colleagues days later (“did you see that? oh yeah, that was seriously cool”). Things that I have learned/observed/noticed in 2010 In the long run, there’s a huge difference between “It works pretty well” and “it just works and I never have to think about it”. I had to get rid of my USB graphics adapter powering the third monitor (read about it in this blog post). Various small issues (desktop icons sometimes moving their positions after a reboot for no apparent reasons, at least one game I couldn’t get run at all, all three monitors sometimes simply refusing to wake up after standby) finally made me buy a PCIe 1x graphics adapter. If you’re interested: The combination of a NVIDIA GTX 460 and a GT 220 is running in “don’t make me think” mode for a couple of months now.   PowerPoint 2010 is a seriously cool piece of software. Not only the new hardware-accelerated effects, but also features like built-in background removal and picture processing (which in many cases are simply “good enough” and save a lot of time) or the smart guides.   Outlook 2010 crashes on me a lot. I haven’t been successful in reproducing these crashes, they just happen when every couple of days on different occasions (only thing in common: I clicked something in the main window – yeah, very helpful observation)   Visual Studio 2010 reminds me of Visual Studio 2005 before SP1, which is actually not a good thing to say about a piece of software. I think it’s telling that Microsoft’s message regarding the beta of SP1 has been different from earlier service pack betas (promising an upgrade path for a beta to the RTM sounds to me like “please, please use it NOW!”).   I have a love/hate relationship with ReSharper. I don’t want to develop without it, but at the same time I can’t fail to notice that ReSharper is taking a heavy toll in terms of performance and sometimes stability. Things I’m looking forward to in 2011 Obviously, the dotnet Cologne 2011. We already have been able to score some big name sponsors (Microsoft, Intel), but we’re still looking for more sponsors. And be assured that we’ll make sure that our partners get the most out of their contribution, regardless of how big or small.   MIX11, period.    Silverlight 5 is going to be great. The only thing I’m a bit nervous about is that I still haven’t read anything official on whether C# next version’s async/await will be in it. Leaving that out would be really stupid considering the end-of-2011 release of SL5 (moving the next release way into the future).

  Read the article

• What's the difference between View Criteria and Where clause?

  - by frank.nimphius

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} A View Criteria is a filter that you apply programmatically or by definition to a View Object instance. It augments the WHERE clause in a View Object query. Named View Criteria are defined in the Query panel of the View Object and are used ·         In combination with the af:query component to build search forms. To do this, you drag and drop the View Criteria from the Named View Criteria node of the View Object in the Data Controls Panel. In the context menu, you then select the Query component - optionally with a result table ·         To restrict a View Object instance in the Application Module model. For this, select a View object instance in the right hand list of the ADF Business Component Data Model panel. Use the Edit button to add a View Criteria to the View Object instance. This ensures that the View Object instance also runs with a query filter applied. View Criteria use bind variables for query conditions that you want to pass in dynamically at runtime. Beside of the ability to apply View Criteria declaratively, you can apply them programmatically in Java. A WHERE clause, if added to a View Object query by design restricts all instances of this View Object, which usually is not what developers want. Because of the benefits - and the configuration options not explained above but in the product documentation referenced below - the recommendation is to use View Criteria. The product documentation explains View Criteria in chapter 5 of the Developer Guide: http://download.oracle.com/docs/cd/E15523_01/web.1111/b31974/bcquerying.htm#BCGIFHHF

  Read the article

• Advice Needed: Developers blocked by waiting on code to merge from another branch using GitFlow

  - by fogwolf

  Our team just made the switch from FogBugz & Kiln/Mercurial to Jira & Stash/Git. We are using the Git Flow model for branching, adding subtask branches off of feature branches (relating to Jira subtasks of Jira features). We are using Stash to assign a reviewer when we create a pull request to merge back into the parent branch (usually develop but for subtasks back into the feature branch). The problem we're finding is that even with the best planning and breakdown of feature cases, when multiple developers are working together on the same feature, say on the front-end and back-end, if they are working on interdependent code that is in separate branches one developer ends up blocking the other. We've tried pulling between each others' branches as we develop. We've also tried creating local integration branches each developer can pull from multiple branches to test the integration as they develop. Finally, and this seems to work possibly the best for us so far, though with a bit more overhead, we have tried creating an integration branch off of the feature branch right off the bat. When a subtask branch (off of the feature branch) is ready for a pull request and code review, we also manually merge those change sets into this feature integration branch. Then all interested developers are able to pull from that integration branch into other dependent subtask branches. This prevents anyone from waiting for any branch they are dependent upon to pass code review. I know this isn't necessarily a Git issue - it has to do with working on interdependent code in multiple branches, mixed with our own work process and culture. If we didn't have the strict code-review policy for develop (true integration branch) then developer 1 could merge to develop for developer 2 to pull from. Another complication is that we are also required to do some preliminary testing as part of the code review process before handing the feature off to QA.This means that even if front-end developer 1 is pulling directly from back-end developer 2's branch as they go, if back-end developer 2 finishes and his/her pull request is sitting in code review for a week, then front-end developer 2 technically can't create his pull request/code review because his/her code reviewer can't test because back-end developer 2's code hasn't been merged into develop yet. Bottom line is we're finding ourselves in a much more serial rather than parallel approach in these instance, depending on which route we go, and would like to find a process to use to avoid this. Last thing I'll mention is we realize by sharing code across branches that haven't been code reviewed and finalized yet we are in essence using the beta code of others. To a certain extent I don't think we can avoid that and are willing to accept that to a degree. Anyway, any ideas, input, etc... greatly appreciated. Thanks!

  Read the article

• Can't add repos after upgrading to 12.04 LTS

  - by joao

  I'm a complete Linux newbie. I've just upgraded from 10.04 to 12.04 LTS and all sorts of things have started to go wrong. One main problem is the fact that I can't add repos. Example: sudo add-apt-repository ppa:team-xbmc outputs: Traceback (most recent call last): File "/usr/bin/add-apt-repository", line 8, in <module> from softwareproperties.SoftwareProperties import SoftwareProperties File "/usr/lib/python2.7/dist-packages/softwareproperties/SoftwareProperties.py", line 53, in <module> from ppa import AddPPASigningKeyThread, expand_ppa_line File "/usr/lib/python2.7/dist-packages/softwareproperties/ppa.py", line 27, in <module> import pycurl ImportError: librtmp.so.0: cannot open shared object file: No such file or directory /etc/apt/sources.list # deb cdrom:[Ubuntu 10.04.1 LTS _Lucid Lynx_ - Release i386 (20100816.1)]/ lucid main restricted # deb cdrom:[Ubuntu 10.04.1 LTS _Lucid Lynx_ - Release i386 (20100816.1)]/ maverick main restricted # See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to # newer versions of the distribution. deb http://archive.ubuntu.com/ubuntu precise main restricted deb-src http://archive.ubuntu.com/ubuntu precise main restricted ## Major bug fix updates produced after the final release of the ## distribution. deb http://archive.ubuntu.com/ubuntu precise-updates main restricted deb-src http://archive.ubuntu.com/ubuntu precise-updates main restricted ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team. Also, please note that software in universe WILL NOT receive any ## review or updates from the Ubuntu security team. deb http://archive.ubuntu.com/ubuntu precise universe deb-src http://archive.ubuntu.com/ubuntu precise universe deb http://archive.ubuntu.com/ubuntu precise-updates universe deb-src http://archive.ubuntu.com/ubuntu precise-updates universe ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu ## security team. deb http://archive.ubuntu.com/ubuntu precise multiverse deb-src http://archive.ubuntu.com/ubuntu precise multiverse deb http://archive.ubuntu.com/ubuntu precise-updates multiverse deb-src http://archive.ubuntu.com/ubuntu precise-updates multiverse ## Uncomment the following two lines to add software from the 'backports' ## repository. ## N.B. software from this repository may not have been tested as ## extensively as that contained in the main release, although it includes ## newer versions of some applications which may provide useful features. ## Also, please note that software in backports WILL NOT receive any review ## or updates from the Ubuntu security team. # deb-src http://pt.archive.ubuntu.com/ubuntu/ lucid-backports main restricted universe multiverse ## Uncomment the following two lines to add software from Canonical's ## 'partner' repository. ## This software is not part of Ubuntu, but is offered by Canonical and the ## respective vendors as a service to Ubuntu users. # deb http://archive.canonical.com/ubuntu lucid partner # deb-src http://archive.canonical.com/ubuntu lucid partner deb http://archive.ubuntu.com/ubuntu precise-security main restricted deb-src http://archive.ubuntu.com/ubuntu precise-security main restricted deb http://archive.ubuntu.com/ubuntu precise-security universe deb-src http://archive.ubuntu.com/ubuntu precise-security universe deb http://archive.ubuntu.com/ubuntu precise-security multiverse deb-src http://archive.ubuntu.com/ubuntu precise-security multiverse # deb http://ppa.launchpad.net/stebbins/handbrake-snapshots/ubuntu precise main # disabled on upgrade to precise I have no clue what do do next. Should I just scrap this installation and start from scratch or is this fixable? librtmp.so.0 also shows up in error logs I've started to get from XBMC (I'm not sure if this is relevant info). Thanks in advance for any help you can give me!

  Read the article

• MacGyver Moments

  - by Geoff N. Hiten

  Denny Cherry tagged me to write about my best MacGyver Moment.  Usually I ignore blogosphere fluff and just use this space to write what I think is important.  However, #MVP10 just ended and I have a stronger sense of community.  Besides, where else would I mention my second best Macgyver moment was making a BIOS jumper out of a soda can.  Aluminum is conductive and I didn't have any real jumpers lying around. My best moment is probably my entire home computer network.  Every system but one is hand-built, usually cobbled together out of spare parts and 'adapted' from its original purpose. My Primary Domain Controller is a Dell 2300.   The Service Tag indicates it was shipped to the original owner in 1999.  Box has a PERC/1 RAID controller.  I acquired this from a previous employer for $50.  It runs Windows Server 2003 Enterprise Edition.  Does DNS, DHCP, and RADIUS services as a bonus.  RADIUS authentication is used for VPN and Wireless access.  It is nice to sign in once and be done with it. The Secondary Domain Controller is an old desktop.  Dual P-III 933 with some extra drives. My VPN box is a P-II 250 with 384MB of RAM and a 21 GB hard drive.  I did a P-to-V to my Hyper-V box a year or so ago and retired the hardware again.  Dynamic DNS lets me connect no matter how often Comcast shuffles my IP. The Hyper-V box is a desktop system with 8GB RAM and an AMD Athlon 5000+ processor.  Cost me less than $500 to put together nearly two years ago.  I reasoned that if Vista and Windows 2008 were the same code then Vista 64-bit certified meant the drivers for Vista would load into Windows 2008.  Turns out I was right. Later I added three 1TB drives but wasn't too happy with how that turned out.  I recovered two of the drives yesterday and am building an iSCSI storage unit. (Much thanks to Starwind.  Great product).  I am using an old AMD 1.1GhZ box with 1.5 GB RAM (cobbled together from three old PCs) as my storave server.  The Hyper-V box is slated for an OS rebuild to 2008 R2 once I get the storage system worked out.  maybe in a week or two. A couple of DLink Gigabit switches ties everything together. Add in the Vonage box, the three PCs, the Wireless-N Access Point, the two notebooks and the XBox and you have gone from MacGyver to darn near Rube Goldberg. The only thing I really spend money on is power supplies and fans.  I buy top-of-the-line for both. I even pull and crimp my own cables. Oh, and if my kids hose up a PC, I have all of their data on a server elsewhere.  Every PC and laptop is pretty much interchangable for email and basic workstation tasks.  That helps a lot too. Of course I will tag SQLVariant.

  Read the article

• Playing HTML5 Video with fall back for IE8/IE7 and earlier versions of other browsers using Silverlight

  - by Harish Ranganathan

  One of the popular HTML5 tags is the video tag.  The ability to play videos without depending on a plugin is something that excites web developers to a great extent and no wonder you end up seeing video demos in all HTML5 conferences. Now, coming to HTML5 Video, the tag itself is simply <video id=”ID” src=”FILENAME.mp4/ogv/webm” > in the simplest form.  This also means that the video needs to be H.256 encoded MP4 format or some of the other formats as mentioned above.  For a detailed specification on this, check this Wikipedia article HTML5 video is supported by all the modern browsers such as IE9 (currently in RC stage), Mozilla Firefox 4 and Chrome latest versions.  Here below is a simple example of a HTML5 video tag and the screen shot of how it looks like in IE9 RC <!DOCTYPE html> <head></head> <body> <h1>This is a sample of an HTML5 Video</h1> <video src="video.mp4" id="myvideo">Your browser doesn’t support this currently</video> </body> </html> You can add attributes to the video tag such as “autoplay” which will automatically start playing the video.  Also, you can specify “poster” to display an initial picture before the video starts playing etc., but I am not going into those for now. This would play well in the modern browsers as mentioned above.  However, if the end users are viewing this page from an earlier version of browsers such as IE8/IE7 or IE6, this video wouldn’t play.  Whatever text that is specified between the video tags, would just show up. Note: for demo purposes, I went to the IE9 developer toolbar and chose IE8 as Browser Mode to exhibit this legacy behaviour.  However, in the interest of serving the larger community of users who visit the site, we would like to have a fall back mechanism for playing videos on older version of browsers. Now, Silverlight is supported in IE6/7 & 8 and other browsers too.  If we can have the same video encoded for Silverlight, we can put the fall-back code, as follows:- <video src="videos/video.mp4" id="myvideo">     <object height="252" type="application/x-silverlight-2" width="448">         <param name="source" value="resources/player.xap">         <param name="initParams" value="deferredLoad=true, duration=0, m=http://localhost/DemoSite/videos/video.mp4, autostart=false, autohide=true, showembed=true, postid=0" />         <param name="background" value="#00FFFFFF" />     </object> </video>   Note, this sample uses a Silverlight XAP file with the same video and uses the object tag to embed it instead of the HTML5 video tag. So, when I now run this sample and switch to IE8 (using the IE9 Developer toolbar’s Browser Mode), I get and when clicking on the “Play” icon, Note, there are multiple ways to play videos in Silverlight and this is one of the ways.  For a complete list of Silverlight samples, visit http://www.silverlight.net/learn/  Also, we can use Flash to play video in the fall-back mechanism as well. Thus, we can create a fall-back mechanism for playing HTML5 videos for the older browsers and hence ensure that the end users get to experience the same. Cheers !!!

  Read the article

• Java, two JPanel on JFrame - Settings JPanel, StartMenu JPanel [on hold]

  - by Andy Tyurin

  There is my first question and I welcome community! I'm making a simple game and have some problems with Start menu. I have three buttons on my JPanel StartMenu and when I click "Settings" button, new JPanel will be open, but I don't know why buttons from StartMenu JPanel appeared in my Settings JPanel. My "Settings" JPanel has one ugly button "Back" in center and ugly grey background. I made some screens to see a problem. Start Menu JPanel when game launched Settings JPanel when button clicked Settings JPanel when mouse was over settings window There is code of StartMenu class: public class StartMenu extends JPanel { private GameButton startGameButton = new GameButton("Start game"); private GameButton settingsGameButton = new GameButton("Settings"); private GameButton exitGameButton = new GameButton("Exit game"); private Image bgImage = new ImageIcon(getClass().getClassLoader().getResource("ru/andydevs/astraLaserForce/bg.png")).getImage(); private int posX; private int posY; final private int WIDTH=(int)Game.SCREEN_DIMENSION.getWidth()/3; final private int HEIGHT=(int)Game.SCREEN_DIMENSION.getHeight()/2; public StartMenu() { setLayout(new GridBagLayout()); GridBagConstraints c = new GridBagConstraints(); setSize(new Dimension(WIDTH, HEIGHT)); posX=(int)Game.SCREEN_DIMENSION.getWidth()/2-WIDTH/2; posY=(int)Game.SCREEN_DIMENSION.getHeight()/2-HEIGHT/2; setBounds(posX, posY,WIDTH,HEIGHT); c.ipadx=95; c.ipady=15; c.fill = GridBagConstraints.HORIZONTAL; c.insets = new Insets(20,0,0,0); c.gridy=0; add(startGameButton, c); c.gridy=1; c.insets = new Insets(20,0,0,0); System.out.println(settingsGameButton.getWidth()); add(settingsGameButton, c); c.gridy=2; c.insets = new Insets(20,0,0,0); add(exitGameButton, c); settingsGameButton.addActionListener(new ActionListener() { @Override public void actionPerformed(ActionEvent e) { GameOptionsPanel gop = new GameOptionsPanel(); Game.container.add(gop); Game.container.setComponentZOrder(gop, 0); Game.container.revalidate(); Game.container.repaint(); } }); exitGameButton.addActionListener(new ActionListener() { @Override public void actionPerformed(ActionEvent e) { Main.currentGame.stop(); } }); } public void paintComponent(Graphics g) { g.drawImage(bgImage,0,0,WIDTH,HEIGHT,null); } } There is code of Settings JPanel public class GameOptionsPanel extends GamePanel { private GameButton backButton = new GameButton("Back"); private GameOptionsPanel that; public GameOptionsPanel() { super((int) (Game.SCREEN_DIMENSION.getWidth()/3), (int) (Game.SCREEN_DIMENSION.getHeight()/2), new Color(50,50,50)); that=this; setLayout(new GridBagLayout()); GridBagConstraints gbc = new GridBagConstraints(); gbc.fill=gbc.HORIZONTAL; add(backButton); backButton.addActionListener(new ActionListener() { @Override public void actionPerformed(ActionEvent e) { Game.container.remove(that); Game.container.revalidate(); Game.container.repaint(); } }); } } I glad to see some suggestions. Thanks.

  Read the article

• Application Performance: The Best of the Web

  - by Michaela Murray

  Wisdom A deep understanding and realization […] resulting in the ability to apply perceptions, judgements and actions. It is also the comprehension of what is true coupled with optimum judgment as to action. - Wikipedia We’re writing a book for ASP.NET developers, and we want you to be a part of it. We know that there’s a huge amount of web developer wisdom that never gets shared, and we want to find those golden nuggets of knowledge and experience, and make sure everyone can learn from them. Right now, we want to find out about your top tips, hard-won lessons, and sage advice for avoiding, finding, and fixing application performance problems. If you work with .NET and SQL, even better – a lot of application performance relies on the interaction with the database, so we want to hear from you! “How Do You Want Me To Be Involved?” Right! Details! We want you, our most excellent readers, to email us with the Best Advice you would give to other developers for getting the best performance out of their applications. It doesn’t matter if your advice is for newbies or veterans, .NET or SQL – so long as it’s about application performance, we want to hear from you. (And if you think that there’s developer wisdom out there that “everyone knows”, a) I’m willing to bet you could find someone who doesn’t know about it, and b) it probably bears repeating anyway!) “I’m Interested. What Can You Do For Me?” Excellent question. For starters, there’s a chance to win a Microsoft Surface (the tablet, not the table-top). Once all the ASP.NET Wisdom has been collected, tallied, and labelled, it will then be weighed and measured by a team of expert judges (whose identities are still a closely-guarded secret).  The top tip in both SQL & .NET categories will each win their author their very own MS Surface. But that’s not all! We can also give you… immortality! More details? Ok. We’ll be collecting all of the tips sent in by our readers (and we can’t wait to learn from you all,) and with the help of our Simple-Talk editors, we will publish and distribute your combined and documented knowledge as a free, community-created, professionally typeset eBook. You will naturally be credited by name / pseudonym / twitter handle / GitHub username / StackOverflow profile / Whatever, as the clearly ingenious author of hot performance tips. The Not-Very-Fine Print Here’s the breakdown: We want to bring together the best application performance knowledge from ASP.NET developers. Closing date for submissions will be 9am GMT, December 4th. Submissions should be made by email – [email protected] Submissions will be judged by a panel of expert judges (who will be revealed soon). The top submission in both the SQL & .NET categories will each win a Microsoft Surface. ALL the tips which make it through the judging process will be polished by Simple-Talk editors, and turned into a professionally typeset eBook, which will be freely available, and promoted alongside the ANTS Performance Profiler tool. Anyone whose entry makes it into the book will be clearly and profusely credited in the method of their choice (or can remain anonymous.) The really REALLY short version Share what you know about ASP.NET application performance for a chance to win a Microsoft Surface, and then get your name credited in a slick eBook with top-notch production values. For more details, see above. We can’t wait to learn from you!

  Read the article

• Am I experienced enough to learn and develop immediately using Ruby on Rails?

  - by acheong87

  General Question I understand that discussions revolving around questions of this form run the risk of becoming too specific to help others. So, perhaps a better, general question would be: What kind of experience, if any, translates easily to Ruby on Rails; and if none, then what's the learning curve like, in comparison to other popular languages? Background I have the opportunity to build a website using whatever technologies I wish to use. It's a fairly simple website, for listing products, taking payments, managing customer data, providing a back-end portal for employees to manage data, possibly hooking in flight information (the products are travel related), possibly integrating a blog and all the social-networking goodies. Specific Problem I have to let the client know by tonight whether I'm interested in taking up this project, before he talks to other potential developers, but I'm on the fence. I already work a full-time C++ development job, so the money doesn't do it for me. It's the opportunity to (be paid to) learn some new technologies and to have a real, running product in the end. I've heard and read great things about Ruby, and am really intrigued. I zipped through some introductory Ruby tutorials, no sweat. However I found the Rails tutorials a little overwhelming, especially not being able to try it out anywhere. And researching Rails hosts like Heroku and EngineYard makes me think that maybe I don't know what I'm getting myself into. The ship's leaving port! I wish I had more time to learn, better yet play with the language, but I have to decide soon! Should I venture or pass? Additional Details My experiences are in C/C++/Tcl/Perl/PHP/jQuery, and basic knowledge of Java/C#. I didn't study C.S. formally so I wasn't exposed to design principles, programming paradigms, etc., which is my greatest concern. Will my lack of understanding in this realm make RoR frustrating to learn? Will it be so incompatible with a C++ "way" of thinking that I'll wish I never started? Am I putting my client at risk by attempting this? If it helps, I'm quick to learn new things (self-taught so far) and care a great deal about correctness, using things for their intended purposes, and so on. I've read numerous recommendations of Agile Development with Rails and would love to read it (though perhaps, while developing in parallel, for shortness of time). Worse comes to worst, I'd give up and do the standard LAMP gig, of course, not charging the client for wasted time. But I'm hoping to avoid the project altogether if it's gonna come down to that! Thanks in advance for any tips, insights, votes of confidence, votes of discouragement (for the better), and such.

  Read the article

• OpenGL - have object follow mouse

  - by kevin james

  I want to have an object follow around my mouse on the screen in OpenGL. (I am also using GLEW, GLFW, and GLM). The best idea I've come up with is: Get the coordinates within the window with glfwGetCursorPos. The window was created with window = glfwCreateWindow( 1024, 768, "Test", NULL, NULL); and the code to get coordinates is double xpos, ypos; glfwGetCursorPos(window, &xpos, &ypos); Next, I use GLM unproject, to get the coordinates in "object space" glm::vec4 viewport = glm::vec4(0.0f, 0.0f, 1024.0f, 768.0f); glm::vec3 pos = glm::vec3(xpos, ypos, 0.0f); glm::vec3 un = glm::unProject(pos, View*Model, Projection, viewport); There are two potential problems I can already see. The viewport is fine, as the initial x,y, coordinates of the lower left are indeed 0,0, and it's indeed a 1024*768 window. However, the position vector I create doesn't seem right. The Z coordinate should probably not be zero. However, glfwGetCursorPos returns 2D coordinates, and I don't know how to go from there to the 3D window coordinates, especially since I am not sure what the 3rd dimension of the window coordinates even means (since computer screens are 2D). Then, I am not sure if I am using unproject correctly. Assume the View, Model, Projection matrices are all OK. If I passed in the correct position vector in Window coordinates, does the unproject call give me the coordinates in Object coordinates? I think it does, but the documentation is not clear. Finally, to each vertex of the object I want to follow the mouse around, I just increment the x coordinate by un[0], the y coordinate by -un[1], and the z coordinate by un[2]. However, since my position vector that is being unprojected is likely wrong, this is not giving good results; the object does move as my mouse moves, but it is offset quite a bit (i.e. moving the mouse a lot doesn't move the object that much, and the z coordinate is very large). I actually found that the z coordinate un[2] is always the same value no matter where my mouse is, probably because the position vector I pass into unproject always has a value of 0.0 for z. Edit: The (incorrectly) unprojected x-values range from about -0.552 to 0.552, and the y-values from about -0.411 to 0.411.

  Read the article

• What do you do when a client requires Rich Text Editing on their website?

  - by George Stocker

  As we all know by now, XSS attacks are dangerous and really easy to pull off. Various frameworks make it easy to encode HTML, like ASP.NET MVC does: <%= Html.Encode("string"); %> But what happens when your client requires that they be able to upload their content directly from a Microsoft Word document? Here's the scenario: People can copy and paste content from Microsoft word into a WYSIWYG editor (in this case tinyMCE), and then that information is posted to a web page. The website is public, but only members of that organization will have access to post information to a webpage. What is the best way to handle this requirement? Currently there is no checking done on what the client posts (since only 'trusted' users can post), but I'm not particularly happy with that and would like to lock it down further in case an account is hacked. The platform in question is ASP.NET MVC. The only conceptual method that I'm aware of that meets these requirements is to whitelist HTML tags and let those pass through. Is there another way? If not, is the best way to let them store it in the Database in any form, but only display it properly encoded and stripped of bad tags? NB: The questions differ in that he only assumes there's one way. I'm also asking the following questions: 1. Is there a better way that doesn't rely on HTML Whitelists? 2. Is there a better way that relies on a different view engine? 3. Is there a WYSIWYG editor that includes the ability to whitelist on the fly? 4. Should I even worry about this since it will only be for 'private posting' (Much in the same way that a private blog allows HTML From the author, but since only he can post, it's not an issue)? Edit #2: If suggesting a WYSIWYG editor, it must be free (as in speech, or as in beer). Update: All of the suggestions thus far revolve around a specific Rich Text Editor to use: Only provide an editor as a suggestion if it allows for sanitization of HTML tags; and it fulfills the requirement of accepting pasted documents from a WYSIWYG Editor like Microsoft Word. There are three methods that I know of: 1. Not allow HTML. 2. Allow HTML, but sanitize it 3. Find a Rich Text Editor that sanitizes and allows HTML. The previous questions remain (1-4 above). Related Question Preventing Cross Site Scripting (XSS)

  Read the article

• Is SugarCRM really adequate for custom development (or adequate at all)? [closed]

  - by dukeofgaming

  Have you used SugarCRM for custom development successfully?, if so, have you done it programmatically or through the Module Builder? Were you successful? If not, why? I used SugarCRM for a project about two years ago, I ran into errors from the very installation, having to hack the actual installation file to deploy the software in the server and other erros that I can't recall now. Two years after, I'm picking it up for a project once again. I'm feeling like I should have developed the whole thing from scratch myself. Some examples: I couldn't install it in the server (again). I had to install it locally, then copy the files and database over to the server and manually edit the config file. Constantly getting deployment errors from the module builder. One reason is SugarCRM keeps creating a record in the upgrade_history table for a file that does not exist, I keep deleting such record and it keeps coming back corrupt. I get other deployment errors, but have not figured them out. then I have to rollback all files and database to try again. I deleted a custom module with relationships, the relationships stayed in the other modules and cannot be deleted anymore, PHP warnings all over the place. Quick create for custom modules does not appear, hack needed. Its whole cache directory is a joke, permanent data/files are stored there. The module builder interface disappears required fields. Edit the wrong thing, module builder won't deploy again, then pray Quick Repair and/or Rebuild Relationships do the trick. My impression of SugarCRM now is that, regardless of its pretty exterior and apparent functionality, it is a very low quality piece of software. This even scared me more: http://amplicate.com/hate/sugarcrm; a quote: I wis this info had been available when I tried to implement it 2 years ago... I searched high and low and the only info I found was positive. Yes, it's a piece of crap. The community edition was full of bugs... nothing worked. Essentially I got fired for implementing it. I'm glad though, because now I work for myself, am much happier and make more money... so, I should really thank SugarCRM for sucking so much I guess! I figured that perhaps some of you have had similar experiences, and have either sticked with SugarCRM or moved on to another solution. I'm very interested in knowing what your resolutions were -or your current situations are- to make up my own mind, since the project I'm working on is long term and I'm feeling SugarCRM will be more an obstacle than an aid. After further failed attempts to continue using this software I continued to stumble upon dead-ends when using the module editor, I could only recover from this errors by using version control. We are now moving on to a custom implementation using Symfony; perhaps if we were using it with its out-of-the-box modules we would have sticked with it.

  Read the article

• Why is a fully transparent pixel still rendered?

  - by Mr Bell

  I am trying to make a pixel shader that achieves an effect similar to this video http://www.youtube.com/watch?v=f1uZvurrhig&feature=related My basic idea is render the scene to a temp render target then Render the previously rendered image with a slight fade on to another temp render target Draw the current scene on top of that Draw the results on to a render target that persists between draws Draw the results on to the screen But I am having problems with the fading portion. If I have my pixel shader return a color with its A component set to 0, shouldn't that basically amount to drawing nothing? (Assuming that sprite batch blend mode is set to AlphaBlend) To test this I have my pixel shader return a transparent red color. Instead of nothing being drawn, it draws a partially transparent red box. I hope that my question makes sense, but if it doesnt please ask me to clarify Here is the drawing code public override void Draw(GameTime gameTime) { GraphicsDevice.SamplerStates[1] = SamplerState.PointWrap; drawImageOnClearedRenderTarget(presentationTarget, tempRenderTarget, fadeEffect); drawImageOnRenderTarget(sceneRenderTarget, tempRenderTarget); drawImageOnClearedRenderTarget(tempRenderTarget, presentationTarget); GraphicsDevice.SetRenderTarget(null); drawImage(backgroundTexture); drawImage(presentationTarget); base.Draw(gameTime); } private void drawImage(Texture2D image, Effect effect = null) { spriteBatch.Begin(0, BlendState.AlphaBlend, SamplerState.PointWrap, null, null, effect); spriteBatch.Draw(image, new Rectangle(0, 0, width, height), Color.White); spriteBatch.End(); } private void drawImageOnRenderTarget(Texture2D image, RenderTarget2D target, Effect effect = null) { GraphicsDevice.SetRenderTarget(target); drawImage(image, effect); } private void drawImageOnClearedRenderTarget(Texture2D image, RenderTarget2D target, Effect effect = null) { GraphicsDevice.SetRenderTarget(target); GraphicsDevice.Clear(Color.Transparent); drawImage(image, effect); } Here is the fade pixel shader sampler TextureSampler : register(s0); float4 PixelShaderFunction(float2 texCoord : TEXCOORD0) : COLOR0 { float4 c = 0; c = tex2D(TextureSampler, texCoord); //c.a = clamp(c.a - 0.05, 0, 1); c.r = 1; c.g = 0; c.b = 0; c.a = 0; return c; } technique Fade { pass Pass1 { PixelShader = compile ps_2_0 PixelShaderFunction(); } }

  Read the article

• Ubuntu 12.04 - No sound - HELP!

  - by Bruno Tacca

  I'm panicking... my sound stopped working after I tried to set-up my notebook speakers, plus two headphone jacks... My idea was to multichannel the sound to 3 channels, built-in speakers, and sound-card 2 headphone jacks. After a couple efforts I did it with 2 channels, speakers and 1 headphone jack, but the other wasn't working. After more tries and tries, sound stop working. I just want my sound back... crying like a baby on the floor. And, if possible, but not necessary, a simple guide to active the 3 channels. xD I will post the diagnosis according to https://help.ubuntu.com/community/SoundTroubleshootingProcedure STEP 1 Did it, still no sound. STEP 2 Did it, still no sound. STEP 3 and #STEP 4 (I removed the log cause there is a limit of characters to be posted.) The log can be found here: https://answers.launchpad.net/ubuntu/+source/alsa-driver/+question/238653 STEP 5 Rebooted, still no sound. STEP 6 Did it. In the Output Devices tab, nothing is muted. I play a music with the Rhythmbox Music Player, I don't hear anything but in the pavucontrol I can see in the Built-in Audio Analog Stereo a sound bar shaking... but, no sound. STEP 7 In alsamixer, AlsaMixer v1.0.25 Card: HDA Intel PCH Chip: Creative CA0132 information View: F3:[Playback] F4: Capture F5: All Item: Headphone [dB gain: 25.00, 25.00] Then, I have 5 columns Headphone, Speaker, PCM, S/PDIF, S/PDIF Default PCM A little weird when I try to mute the Headphone and the Speaker, here what happens: Starting both unmutted, mutting headphone cause speaker being mutted automaticaly. Starting both unmutted, mutting speaker cause headphone being mutted automaticaly. Starting both mutted, possible to unmute both separately. STEP 8 I cannot hear sound on both (headphone and/or speaker). STEP 9 Dual boot... Restarted, windows was with sound at max volume. Restarted again, still no sound at ubuntu. I heard something when ubuntu started, a little noise, then silence again. The sound icon always start mutted, after unmutting, I have no sound. STEP 10 I dont have this command in my ubuntu. STEP 11 Tried at STEP 8, no sound. There are no problem with jumpers or hardware, cause I have sound working on windows. STEP 12 No way to open my alienware and loss the warranty x.X" STEP 13 I think it's loaded, judging my the logs STEP 14 Alienware M17xR4, the hardware is listed in the logs above, at STEP 4. There are two headphone hacks, one with just an headphone printed above, and the other with an headset (with mic) printed, there is a mic jack too, and a spdif (optical) too. STEP 15 I dont want to enable S/PDIF STEP 16 I never used the HDMI output, yet... Thanks in advance. I hope I listed all the information you need.

  Read the article

• Running Apache and Tomcat together on different subdomains?

  - by Ritesh M Nayak

  Posted this on ServerFault but didn't get a response. Hoping I will have better luck on the Ubuntu site. I have been trying to get this working the whole of today. I have a server which resolves to the domain example.com . This is running Apache2 and Tomcat 6. The requirement is to direct requests to example.com to apache2 and app.example.com to Tomcat. I know I have to do a VirtualHost proxy pass for this to work. Here are the settings on my server. /etc/hosts file looks something like this 127.0.0.1 localhost localhost.localdomain example.com app.example.com I have two virtual host files for the different domains in /etc/apache2/sites-enabled /etc/apache2/sites-enabled/example.com looks like this <VirtualHost *:80> # Admin email, Server Name (domain name) and any aliases ServerAdmin webmaster@localhost ServerName example.com ServerAlias www.example.com DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> /etc/apache2/sites-enabled/app.example.com file looks like this <VirtualHost *:80> ServerName app.example.com ServerAlias www.app.example.com ProxyPreserveHost On ProxyPass / http://localhost:8080/ ProxyPassReverse / http://localhost:8080/ SetEnv force-proxy-request-1.0 1 SetEnv proxy-nokeepalive 1 </VirtualHost> mod_proxy and mod_rewrite are both enabled on the apache instance. I have a CNAME entry for both example.com and app.example.com. When accessing app.example.com, I get an 403 forbidden, saying I have no access to / on the server. What am I doing wrong?

  Read the article

• ObjectStorageHelper<T> now available for Windows 8 RTM

  - by jamiet

  In October 2011 I wrote a blog post entitled ObjectStorageHelper<T> – A WinRT utility for Windows 8 where I introduced a little utility class called ObjectStorageHelper<T> that I had been working on while noodling around on the Developer Preview of Windows 8. ObjectStorageHelper<T> makes it easy for anyone building apps for Windows 8 to save data to files. How easy? As easy as this: var myPoco = new Poco() { IntProp = 1, StringProp = "one" }; var objectStorageHelper = new ObjectStorageHelper<Poco>(StorageType.Local); await objectStorageHelper.SaveAsync(myPoco); Compare that to the plumbing code that you would have to write otherwise: var Obj = new Poco() { IntProp = 1, StringProp = "one" }; StorageFile file = null; StorageFolder folder = GetFolder(storageType); file = await folder.CreateFileAsync(FileName(Obj), CreationCollisionOption.ReplaceExisting); IRandomAccessStream writeStream = await file.OpenAsync(FileAccessMode.ReadWrite); using (Stream outStream = Task.Run(() => writeStream.AsStreamForWrite()).Result) {     serializer.Serialize(outStream, Obj);     await outStream.FlushAsync(); } and you can see how ObjectStorageHelper<T> can help save a Windows 8 developer quite a few headaches. ObjectStorageHelper<T> simply requires you to pass it an object to be saved, tell it where to save it (Roaming, Local or Temporary), and you’re done. Retrieving an object from storage is equally as simple: var objectStorageHelper = new ObjectStorageHelper<Poco>(StorageType.Local); var myPoco = await objectStorageHelper.LoadAsync(); Please check the homepage for the project at http://winrtstoragehelper.codeplex.com/ for (much) more info. A number of people have used and tested ObjectStorageHelper<T> since those early days and one of those folks in particular, David Burela, was good enough to report a couple of bugs: Saving Asynchronously Save fails when class is in another project As a result of David’s bug reports and some more extensive testing on my side I have overhauled the initial code that I wrote last October and am confident that it is now much more robust and ready for primetime (check the commit history if you’re interested). The source code (which, again, you can find on Codeplex at http://winrtstoragehelper.codeplex.com/) includes a suite of unit tests to test all of the basic use cases (if you can think of any more please let me know). If you use this in any of your Windows 8 projects then please let me know. I love getting feedback and I’d also love to know if this is actually being used anywhere. @Jamiet

  Read the article

< Previous Page | 484 485 486 487 488 489 490 491 492 493 494 495  | Next Page >