Search Results

Search found 47997 results on 1920 pages for 'super newbie'.

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

Page 488/1920 | < Previous Page | 484 485 486 487 488 489 490 491 492 493 494 495  | Next Page >

  • Degraded RAID5 and no md superblock on one of remaining drive

    - by ark1214
    This is actually on a QNAP TS-509 NAS. The RAID is basically a Linux RAID. The NAS was configured with RAID 5 with 5 drives (/md0 with /dev/sd[abcde]3). At some point, /dev/sde failed and drive was replaced. While rebuilding (and not completed), the NAS rebooted itself and /dev/sdc dropped out of the array. Now the array can't start because essentially 2 drives have dropped out. I disconnected /dev/sde and hoped that /md0 can resume in degraded mode, but no luck.. Further investigation shows that /dev/sdc3 has no md superblock. The data should be good since the array was unable to assemble after /dev/sdc dropped off. All the searches I done showed how to reassemble the array assuming 1 bad drive. But I think I just need to restore the superblock on /dev/sdc3 and that should bring the array up to a degraded mode which will allow me to backup data and then proceed with rebuilding with adding /dev/sde. Any help would be greatly appreciated. mdstat does not show /dev/md0 # cat /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] [multipath] md5 : active raid1 sdd2[2](S) sdc2[3](S) sdb2[1] sda2[0] 530048 blocks [2/2] [UU] md13 : active raid1 sdd4[3] sdc4[2] sdb4[1] sda4[0] 458880 blocks [5/4] [UUUU_] bitmap: 40/57 pages [160KB], 4KB chunk md9 : active raid1 sdd1[3] sdc1[2] sdb1[1] sda1[0] 530048 blocks [5/4] [UUUU_] bitmap: 33/65 pages [132KB], 4KB chunk mdadm show /dev/md0 is still there # mdadm --examine --scan ARRAY /dev/md9 level=raid1 num-devices=5 UUID=271bf0f7:faf1f2c2:967631a4:3c0fa888 ARRAY /dev/md5 level=raid1 num-devices=2 UUID=0d75de26:0759d153:5524b8ea:86a3ee0d spares=2 ARRAY /dev/md0 level=raid5 num-devices=5 UUID=ce3e369b:4ff9ddd2:3639798a:e3889841 ARRAY /dev/md13 level=raid1 num-devices=5 UUID=7384c159:ea48a152:a1cdc8f2:c8d79a9c With /dev/sde removed, here is the mdadm examine output showing sdc3 has no md superblock # mdadm --examine /dev/sda3 /dev/sda3: Magic : a92b4efc Version : 00.90.00 UUID : ce3e369b:4ff9ddd2:3639798a:e3889841 Creation Time : Sat Dec 8 15:01:19 2012 Raid Level : raid5 Used Dev Size : 1463569600 (1395.77 GiB 1498.70 GB) Array Size : 5854278400 (5583.08 GiB 5994.78 GB) Raid Devices : 5 Total Devices : 4 Preferred Minor : 0 Update Time : Sat Dec 8 15:06:17 2012 State : active Active Devices : 4 Working Devices : 4 Failed Devices : 1 Spare Devices : 0 Checksum : d9e9ff0e - correct Events : 0.394 Layout : left-symmetric Chunk Size : 64K Number Major Minor RaidDevice State this 0 8 3 0 active sync /dev/sda3 0 0 8 3 0 active sync /dev/sda3 1 1 8 19 1 active sync /dev/sdb3 2 2 8 35 2 active sync /dev/sdc3 3 3 8 51 3 active sync /dev/sdd3 4 4 0 0 4 faulty removed [~] # mdadm --examine /dev/sdb3 /dev/sdb3: Magic : a92b4efc Version : 00.90.00 UUID : ce3e369b:4ff9ddd2:3639798a:e3889841 Creation Time : Sat Dec 8 15:01:19 2012 Raid Level : raid5 Used Dev Size : 1463569600 (1395.77 GiB 1498.70 GB) Array Size : 5854278400 (5583.08 GiB 5994.78 GB) Raid Devices : 5 Total Devices : 4 Preferred Minor : 0 Update Time : Sat Dec 8 15:06:17 2012 State : active Active Devices : 4 Working Devices : 4 Failed Devices : 1 Spare Devices : 0 Checksum : d9e9ff20 - correct Events : 0.394 Layout : left-symmetric Chunk Size : 64K Number Major Minor RaidDevice State this 1 8 19 1 active sync /dev/sdb3 0 0 8 3 0 active sync /dev/sda3 1 1 8 19 1 active sync /dev/sdb3 2 2 8 35 2 active sync /dev/sdc3 3 3 8 51 3 active sync /dev/sdd3 4 4 0 0 4 faulty removed [~] # mdadm --examine /dev/sdc3 mdadm: No md superblock detected on /dev/sdc3. [~] # mdadm --examine /dev/sdd3 /dev/sdd3: Magic : a92b4efc Version : 00.90.00 UUID : ce3e369b:4ff9ddd2:3639798a:e3889841 Creation Time : Sat Dec 8 15:01:19 2012 Raid Level : raid5 Used Dev Size : 1463569600 (1395.77 GiB 1498.70 GB) Array Size : 5854278400 (5583.08 GiB 5994.78 GB) Raid Devices : 5 Total Devices : 4 Preferred Minor : 0 Update Time : Sat Dec 8 15:06:17 2012 State : active Active Devices : 4 Working Devices : 4 Failed Devices : 1 Spare Devices : 0 Checksum : d9e9ff44 - correct Events : 0.394 Layout : left-symmetric Chunk Size : 64K Number Major Minor RaidDevice State this 3 8 51 3 active sync /dev/sdd3 0 0 8 3 0 active sync /dev/sda3 1 1 8 19 1 active sync /dev/sdb3 2 2 8 35 2 active sync /dev/sdc3 3 3 8 51 3 active sync /dev/sdd3 4 4 0 0 4 faulty removed fdisk output shows /dev/sdc3 partition is still there. [~] # fdisk -l Disk /dev/sdx: 128 MB, 128057344 bytes 8 heads, 32 sectors/track, 977 cylinders Units = cylinders of 256 * 512 = 131072 bytes Device Boot Start End Blocks Id System /dev/sdx1 1 8 1008 83 Linux /dev/sdx2 9 440 55296 83 Linux /dev/sdx3 441 872 55296 83 Linux /dev/sdx4 873 977 13440 5 Extended /dev/sdx5 873 913 5232 83 Linux /dev/sdx6 914 977 8176 83 Linux Disk /dev/sda: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 66 530113+ 83 Linux /dev/sda2 67 132 530145 82 Linux swap / Solaris /dev/sda3 133 182338 1463569695 83 Linux /dev/sda4 182339 182400 498015 83 Linux Disk /dev/sda4: 469 MB, 469893120 bytes 2 heads, 4 sectors/track, 114720 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk /dev/sda4 doesn't contain a valid partition table Disk /dev/sdb: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdb1 * 1 66 530113+ 83 Linux /dev/sdb2 67 132 530145 82 Linux swap / Solaris /dev/sdb3 133 182338 1463569695 83 Linux /dev/sdb4 182339 182400 498015 83 Linux Disk /dev/sdc: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdc1 1 66 530125 83 Linux /dev/sdc2 67 132 530142 83 Linux /dev/sdc3 133 182338 1463569693 83 Linux /dev/sdc4 182339 182400 498012 83 Linux Disk /dev/sdd: 2000.3 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdd1 1 66 530125 83 Linux /dev/sdd2 67 132 530142 83 Linux /dev/sdd3 133 243138 1951945693 83 Linux /dev/sdd4 243139 243200 498012 83 Linux Disk /dev/md9: 542 MB, 542769152 bytes 2 heads, 4 sectors/track, 132512 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk /dev/md9 doesn't contain a valid partition table Disk /dev/md5: 542 MB, 542769152 bytes 2 heads, 4 sectors/track, 132512 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk /dev/md5 doesn't contain a valid partition table

    Read the article

  • Virtualbox and Serial Port permissions

    - by Pandincus
    I have a Windows XP Pro SP3 host machine running a Windows XP Pro SP3 guest machine. The host machine has one serial port, COM1, that I need to use in the guest machine. When I add the serial port to the guest machine and try to start it, I get the following error: Failed to start the virtual machine xxx Cannot open host device 'COM1' for read/write access. Check the permissions of that device (VERR_ACCESS_DENIED). Unknown error creating VM (VERR_ACCESS_DENIED). What are some of the things that might be causing this problem? How can I check "permissions" on a serial port?

    Read the article

  • How to force a resolution in linux?

    - by hi
    I have a HP LP3065 that requires a dual link dvi cable to go up to 2560x1600 resolution. However, I do not have that cable, but I want to use 1920x1200 resolution. However, my nVidia Display Settings (also system display settings) will only go up to 1280x1024, which looks horribly pixelated on the 30". How do I force the 1920x1200 resolution? I tried adding the mode into my xorg.conf file, but it still would not take it. I know my vid card can do 1920x1200 since it works on the 24" monitor with the same dvi cable. Here are my specs: Fedora 12 Nvidia Quadro NVS 420 Intel Xenon E5530 cpu 6gig memory Thanks

    Read the article

  • Should root ever own files in my (linux) home directory?

    - by Darren Cook
    This question started off asking why my history file wasn't working properly. Then I noticed it was -rw------- 1 root root and hadn't been updated since 2012-09-11. I changed the ownership, problem fixed. But now I see some other files are owned by root: .gitconfig .pearrc .viminfo Can I safely change them to be owned by my normal user, not root? I'm scratching my head trying to work out if there is a downside, or a security consequence. Losing seven weeks history is actually quite painful, because I lean on it a lot (e.g. to remind how I last did an archive). Would it be reasonable to set up a cron job to email me if it finds any files in my home directory owned by anyone else but me? Rephrased: is there ever a good reason for root to own a file in my home directory?

    Read the article

  • Remote Desktop Windows 7 into a XP sp3 system print issue

    - by user50963
    I have a windows 7 laptop that I use to remote in to work, which is a XP sp3. I have a brother MFC-8670dn printer. I have the win7 print drivers installed and working on the win7. I made local printers accessible over the RDP. I installed the xp drivers for the Brother printer. So my question is, " Is there a way that I can print from my win7 machine remotely connected to a xp sp3 system"? Or is there no way that I can put the correct drivers on the xp machine to have it redirect to my laptop(win7)

    Read the article

  • GNU screen - Unable to reattach to screen after lost connection

    - by subhashish
    I was using irssi in screen but lost connection. After I ssh'd back in to the server, I can no longer attach to that screen. screen -ls shows that the screen is already attached. I tried screen -D to force detach it, and it said detach but screen -ls still says it's attached. I tried screen -x and it just hangs there. [sub@server ~]$ screen -ls There are screens on: 4033.poe (Detached) 7728.irssi (Attached) 2 Sockets in /var/run/screen/S-sub. What can I do now?

    Read the article

  • Reduce power consumption of gaming computer while idle

    - by White Phoenix
    This is my current build: EVGA X58 (first generation) motherboard Intel i7 965 clocked @ 3.3 Ghz 3x DDR3-1600 Corsair RAM at stock timings and voltages Corsair AX750 80 Plus Gold PSU 1 Optical Drive 1 Seagate 7200.10 500 GB drive 2x Western Digital Caviar Black 1 TB drives OCZ Vertex 1 60 GB EVGA GTX 460 oc'd at 800/1600/1850 Antec 1200 case HT-Omega Striker 7.1 Sound Card Windows 7 32-bit Professional (PAE Enabled) I've already seen this post Reduce power use on computer and this post How do I lower power consumption of my computer and while useful, I'm looking for answers specific to my build and OS. I'm pretty sure this build is a energy-intensive build by default, but I want to try to reduce the amount of energy my build uses when I leave it idle (when I go to bed or go out, etc). The first requirement for this machine is that I need to leave it on, so I cannot turn it off while it's being unused. I run it as a file server for personal reasons and I also leave it on in case people leave me messages on various IM services and chat clients (IRC, MSN, Steam, XFire, Pidgin, etc). I'm also unable to replace the parts in my computer with a cheaper "greener" part. What are some ways to minimize the amount of power the machine uses? I'm already using a high efficiency power supply (80 Plus Gold), but I imagine there's other things that can be done in the BIOS and Windows' power settings to reduce power usage while I'm not using the computer. From what I can tell, I can't use Sleep since that'll disable network access (whole reason why I leave the computer on in the first place). I already turn off my monitor when it's not in use. I enabled Intel SpeedStep within the BIOS (I know, I have a 965 and why am I enabling SpeedStep?) Should I bring the graphics card back to stock speeds and lower the clock on the processor even more? Main reason why I'm asking is I think this computer alone is the reason why my power bill is high, so I want to reduce its consumption to as low as possible without having to shut the thing down.

    Read the article

  • How to set environment variables for Xfce windowing environment

    - by GreenMatt
    We're using Ubuntu 12.04.1 with Xfce 4.8. We have a script which sets environment variables needed by our software. In the past, I figured out how to run this script in the Xfce start up so that these environment variables are set up and available to gui based programs launched via icons. Recently an OS upgrade wiped out this setting and I can't remember or find how to do this. I've tried sourcing the script from ~/.profile, ~/.xinitrc, and ~/.config/xfce4/xinitrc, but no luck.

    Read the article

  • Windows 7 Gadgets dock?

    - by lance
    I've got four gadgets on my Windows 7 desktop. I want them to dock against the edge of the screen, such that maximized windows don't cover them (the "Always On Top" option doesn't meet my needs). Is there a setting or tool which will allow this?

    Read the article

  • VMWare-Tools Installation fails on Ubuntu 11.04

    - by Ajay
    I am trying to install VMwareTools-8.4.6-385536.tar.gz (VMWare Tools) on the following operating system: Ubuntu 11.04 - Linux ubuntu 2.6.38-8-generic #42-Ubuntu SMP Mon Apr 11 03:31:50 UTC 2011 i686 i686 i386 GNU/Linux I am using VMPlayer version 3.1.4 - build 385536 ==================================================================== After starting the installation i am getting the following errors: What is the directory that contains the init scripts? [/etc/init.d] Error opening No such file or directory ================================================ Distribution provided drivers for Xorg X server are used. Skipping X configuration because X drivers are not included. Creating a new initrd boot image for the kernel. update-initramfs: Generating /boot/initrd.img-2.6.38-8-generic Starting VMware Tools services in the virtual machine: Switching to guest configuration: done Blocking file system: done Guest operating system daemon: failed Virtual Printing daemon: done Unable to start services for VMware Tools Can somebody help in this?

    Read the article

  • DMG image containing Mac OS X 10.6.5 update not recognized

    - by Lawliet
    Hello, I want to update my Mac OS X 10.6.3 and want to use the manual package update (not Software Update) and I am having this problem for two days now. First I downloaded Mac OS X 10.6.5 Combo update and on the first opening it popped up a message saying "Unable to mount: disk image not recognized". I thought that somehow the image became corrupt during the download, so I downloaded it again. Same result. And I downloaded again. And again... No use, it still states that the .dmg is not recognized. Then I tried to update my system from 10.6.3 to 10.6.4 using the same method (package installer). It worked. And of course I downloaded the 10.6.5 update (not the combo package, but the 10.6.4 10.6.5 update package)... guess what. Not recognized. I don't understand how is this possible. Did anyone has the same problem? Please don't advice me to use software update, as I need to do that on multiple Macs Thanks in advance.

    Read the article

  • can router configuration cause decreasing of download rate?

    - by behrooz
    My download speed got crazy since I changed the router's IP. But nothing got fixed after doing a factory reset. The speed was 1024 kb/s (128 kB/s) but it is 200kb/s (max) right now. I mean it works good if a request is small (i.e. a HTTP request) but it gets slow if a request has a big response. Help me please. (It is three days I'm downloading VS2010.)

    Read the article

  • reduce timeout when connecting to wrong IP (XP-XP, windows explorer)

    - by Viki
    I have many shortcuts in the form \10.0.0.123\path in Windows Explorer (XP). Some of the IPs are sometimes dead (those vmware machines that are inactive). The problem is, when I try to open "Properties" on such shortcut (to correct the IP, or to delete it), Windows Explorer freezes for minutes. For very long time. Start menu freezes, too. This is very inconvenient. How can I reduce the windows explorer timeout when it is probing the connection to another XP share ?

    Read the article

  • Paint.NET equivalent for Linux?

    - by Macha
    On Windows, my favorite image editor is Paint.NET. However, on Linux, GIMP is as unfriendly as photoshop despite having less features. (i.e. It takes ages to load, their's far too much stuff). Most of my image editing is simple things where Photoshop or GIMP would be overkill. Paint.NET does not run on Wine or Mono. So is there any similar fast and simple but powerful image editor available for Linux? EDIT: There is a Mono version available, but I don't want to have to deal with installing svn versions of mono, and compiling the version myself.

    Read the article

  • Color Printer: Laser vs Inkjet

    - by Mike
    I am about to buy a color printer. I had a B&W Laserjet printer in the past but since then I've used inkjets for decades. I need a printer that can deliver high quality as these photo inkjet printers, but I'm tired of paying for ink that costs $9,000 per gallon (1 gallon = 3.785 liters = 300 cartridges = $9,000). So, I was thinking about buying a color laser printer, but I'm not sure these printers can deliver the same quality and are worth the investment in terms of toner consumption. I remembered that my old Laserjet printer was able to print 1100 pages per toner cartridge. The inkjet printers I have can print 500 pages per cartridge. Price by price, 2 inkjet cartridges have more or less the same cost as one toner cartridge and in theory prints almost the same. I am not sure if this is true for color lasers. What can you guys tell me about quality, toner cost and cost per page for laser or inkjet printer? Is it worth the change? (Keep in mind that an inkjet printer costs $50 and a laser printer costs $200.) Thanks.

    Read the article

  • E-Commerce website using blogging service

    - by Rohit
    I have been selling software products since last few years. I now want to sell them online. I have three ways in my mind: Using TypePad and integrating PayPal code in it. Get designed my own website. Buy a shopping cart online app. like Volusion etc. I am not selling all the products but only selected software products. I want to know which is the best solution in terms on cost, manageability and getting online response.

    Read the article

  • Limit share size at LaCie d2 Network

    - by zote
    I share an LaCie d2 Network with my brother. We an planning to have 3 shares: 1000gb public and 250 for each of us. The shares are created, but how can I set limit (quota) of some share, to prevent I get all NAS space?

    Read the article

  • How to partition a Flash Drive?

    - by Nrew
    Do you know of any way on how to partition a flash drive. Specifically an 8gb toshiba flash drive. I have tried using lexar usb format:http://tinyurl.com/m7qkbw But there was no luck, Do yo know of any application that could do flash drive partitioning. I really wanted to have a bootable flash drive but can still store my files on a different partition.

    Read the article

  • How can I safely close this window and forever avoid seeing similar pop-ups from Mackeeper Zeobit's malware and spyware?

    - by Michael Prescott
    The attached image shows a window that just popped up and the only button available is the OK button. I could Force quit Safari, but I've got several sites open right now and don't want to try and find my place again. Besides, I've seen similar hacks in the past and I'd like to learn how to handle them in a way better than just a brute force-quit. I've never heard of MacKeeper or Zeobit, so I opened Firefox and did a few searches while Safari is obviously still stuck, waiting for me to click the sneaky OK button in the dialog window. Anyhow, at least the first few pages of most search results contain lots of blabbering from questionable witnesses about how MacKeeper saved them from some malware or spyware. However, any company that is hacking the browser to maliciously install their product is itself the criminal and not providing a true security application. So, there are three questions here: How can I close this window? Can I do something to Safari to avoid these hacks in the future? (Just curious) Is MacKeeper or Zeobit somehow loading the search results so that no information about their application being malware or spyware is listed (I can't be the only person in the world that is offended by their tactics, even though it appears I am)?

    Read the article

  • Custom kernel with NFS client support

    - by Vaibhav
    I'm trying to build a custom Linux kernel using this link I have successfully built the kernel and booted into it. Now I want to mount NFS share on it. I have enabled NFS client support from menuconfig . Update : I'm trying to mount a NFS share from newly built kernel. I have tried adding a NFS client support to the kernel. Following command shows (From newly built kernel) #cat /proc/filesystems nodev nfs nodev usbfs ext3 vfat .... Which shows that kernel support NFS filesystem but, mount command fails to mount NFS share, which is working fine on other machines. Help will be appreciated.

    Read the article

  • Single application through OpenVPN tunnel (Debian Lenny)

    - by mikael
    I'm using Debian Lenny and I want to tunnel rtorrent only through a OpenVPN tunnel. I have a tunnel running, the config file looks like this: client dev tun proto udp remote openvpn.xxx.com 1194 resolv-retry infinite nobind persist-key persist-tun ca /etc/openvpn/xxx/keys/ca.crt cert /etc/openvpn/xxx/keys/client.crt key /etc/openvpn/xxx/keys/client.key tls-auth /etc/openvpn/xxx/keys/tls.key 1 ns-cert-type server comp-lzo verb 3 auth-user-pass script-security 3 reneg-sec 0 My idea is that I could run a sockd proxy internally that redirects traffic to the openvpn tunnel. I could use the *nix "proxifier" application "tsocks" to make it possible for rtorrent to connect through that proxy (as rtorrent doesn't support proxies). I have trouble configuring sockd as my IP inside the VPN changes every time I connect. This is a config file someone said would help: http://ircpimps.org/sockd.conf As my IP changes at each connect I don't know what to put in that config file. I have no control over the host side config file. Any help wanted. Any other method is very welcome.

    Read the article

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

< Previous Page | 484 485 486 487 488 489 490 491 492 493 494 495  | Next Page >