Search Results

Search found 38458 results on 1539 pages for 'remote access'.

Page 489/1539 | < Previous Page | 485 486 487 488 489 490 491 492 493 494 495 496  | Next Page >

• Issues with VPN functionality

  - by Xorandor

  I've been working on setting up VPN connectivity to our office location. We bought a Cisco WRV210 which have a builtin VPN server. Cisco has some software QuickVPN, which is not as quick and easy as I had thought. I've had mixed experiences on different machines with connecting. Instead I configured an IPSec VPN tunnel following a guide from TheGreenBow here http://www.thegreenbow.com/doc/tgbvpn_cg_linksys_wrv200_en.pdf I followed their instructions and tried out an evaluation of their software, and VPN connection should be working ok. I'm able to do RDP to a machine on the network (using IP address, not machine name) and ping the router etc. What I'm trying to solve are two things: It's not like I'm "really" on the network. Or at least I'm restricted to some degree when going through the VPN. I can't access a machine on the network using machine name, only IP. I can't ping a machine, but the router just fine. Could this be that something is not set up properly? If so, I can ofcourse supply additional information. Second, when I log onto the VPN, I would really like my outgoing connection to go through the internet connection of the remote location. Basically if I connect to the VPN I want my outgoing IP to be that of the remote location's (needed for some IP resctrictions on some of our servers). At a previous work location it worked like this when we connected to our office VPN over PPTP and the builtin windows VPN client. I'm not a huge expert on the topic, so any hints will be appreciated.

  Read the article

• VirtualBox VM running web server not accessible via external IP

  - by mwigdahl

  I have a Windows 7 machine running VirtualBox with an Ubuntu guest. The guest has a Bitnami LAMP stack installed. I have the guest configured for Bridged networking, and I can access the guest web server just fine from other machines on my LAN using the guest's IP. I'm trying to configure port forwarding so that I can access the web server from outside my LAN. (The router is a 2WIRE model as I'm on ATT's UVerse). I've set up port forwarding for ports 80 and 443 to the guest's IP in a similar manner to how I had them set up for my previous, physical web server, which worked just fine. However, I cannot seem to access the new, virtual web server using my external IP on the forwarded port. I suspected Windows Firewall issues on the host, but disabling it didn't solve the issue. Anyone have advice on what I should try next? EDIT: I've now attempted disabling the firewall on the guest with sudo ufw disable -- that doesn't seem to help either. However, after checking the router's port forwarding in more detail I may see the problem. My VM is named "linux" and in the router's configuration pages it shows up inconsistently. Sometimes it reports with a valid LAN IP and other times it doesn't show up with any IP. Even when it shows the correct IP the router indicates that it is disconnected. Could this be an indication that the 2WIRE router doesn't play well with VirtualBox's bridged networking mode?

  Read the article

• Understanding encryption Keys

  - by claws

  Hello, I'm really embarrassed to ask this question but its the fact that I don't know anything about encryption. I always avoided it. I don't understand the concept of encryption keys (public key, private key, RSA key, DSA key, PGP Key, SSH key & what not) . I did encounter these in regular basis but as I said I always avoided them. Here are few instances where I encountered: Creating Account: A public RSA or DSA key will be needed for an account. Send the key along with your desired account name to [email protected] I really don't know what are RSA/DSA or How to get their keys? Do I need to register some where for that? Mailing: I'm unable to recall exactly but I've seen some mails have some attachments like signature or the mail footer will have something called PGP signature etc.. I really don't get its concept. GIT Version control: I created account in assembla.com (for private GIT repo) and it asked me to enter "SSH keys" to my profile. Where am I gonna get these? Why do I need it? Isn't SSH related to remote login (like remote desktop or telnet)? How are these two SSHs related & differ? I don't know in how many more situations I'm going to encounter these things. I'm really confused and have no clue about where to start & how to proceed to learn these things. Kindly someone point me in correct direction. Note: I've absolutely zero interested in encryption related topics. So, there is no way I'm going to read a graduate level book on this subject. I just want to clear my concepts without going into much depth.

  Read the article

• debugging connection to mysql from python script using MySQLdb

  - by timpone

  I am a python newbie and have a python 2.5 script that is using MySQLdb to connect on OS X 10.5.8. I haven't been able to succesfully connect to the database of interest with this. However, I am able to connect using php's mysqli and also via the mysql cli interface. I get the error: File "build/bdist.macosx-10.5-i386/egg/MySQLdb/connections.py", line 188, in __init__ _mysql_exceptions.OperationalError: (1045, "Access denied for user 'arc_development'@'localhost' (using password: YES)") On my linux box which has the same mysql perms, the script works fine logging in. On my OS X laptop, I am able to create a database named test_python which bypasses mysql authentication scheme. This makes me think that issues like 32bit / 64bit incompatabilities aren't occuring. If I turn on the query log, I get access denied: 100610 20:56:55 4 Connect Access denied for user 'arc_development'@'localhost' (using password: YES) I'm a little bit at a loss to what to do next. Is there any way I can specify in the general log or binary log to get the actual password set on the connection string? How about writing out from connections.py file the value (although not sure how I'd do that)? thanks

  Read the article

• IIS WebServer CreatesNew file: OwnerShip?

  - by Beaud.

  IIS is configured for Integrated Windows Authentication. web.config is configured as follows: <authentication mode="Windows" /> <identity impersonate="true" /> We are Load balancing between \webserver1 and \webserver2. Windows Server 2003 \\webserverX creates a XML file to \\share1 and access is denied. We got pass through access denial by allowing Everyon to access the share... We would like to have the impersonated user to be the owner of the created file. Instead, \\webserver1's computer account is the owner. How can we make sure that the impersonated user has ownership of the file at creation time? PROGRESSION: I decided to create the file locally on \\webserver1's root directory. File's ownership is NETWORK SERVICES even if impersonate="true". I'm unable to change ownership of the file in C# code. Why when creating a file, IIS won't use the impersonated user's write permissions? If it actually does, what I am doing wrong?

  Read the article

• How to clone MySQL DB? Errors with CREATE VIEW/SHOW VIEW privileges

  - by user38071

  Running MySQL 5.0.32 on Debian 4.0 (Etch). I'm trying to clone a WordPress MySQL database completely (structure and data) on the same server. I tried doing a dump to a .sql file and an import into a new empty database from the command line, but the import fails with errors saying the user does not have the "SHOW VIEW" or "CREATE VIEW" privilege. Trying it with PHPMyAdmin doesn't work either. I also tried doing this with the MySQL root user (not named "root" though) and it shows an "Access Denied" error. I'm terribly confused as to where the problem is. Any pointers on cloning a MySQL DB and granting all privileges to a user account would be great (specifically for MySQL 5.0.32). The SHOW GRANTS command for the existing user works (the one who has privileges over the source database). It shows that the user has all privileges granted. I created a new user and database. Here's what I see with the grant commands. $ mysql -A -umyrootaccount --password=myrootaccountpassword mysql> grant all privileges on `newtarget_db`.* to 'newtestuser'@'localhost'; ERROR 1044 (42000): Access denied for user 'myrootaccount'@'localhost' to database 'newtarget_db' mysql> grant all privileges on `newtarget_db`.* to 'existingsourcedbuser'@'localhost'; ERROR 1044 (42000): Access denied for user 'myrootaccount'@'localhost' to database 'newtarget_db'

  Read the article

• can't ssh from mac to windows (running ssh server on cygwin)

  - by Denise

  I set up an ssh server on a fresh windows 7 machine using the latest version of cygwin. Disabled the firewall. I can ssh into it from itself, from a different windows box (using winssh), and from a linux vm. In spite of that, I tried to ssh in from two different macs, and neither would let me! This is the debug output: OpenSSH_5.1p1, OpenSSL 0.9.7l 28 Sep 2006 debug1: Reading configuration data /etc/ssh_config debug1: Connecting to 3dbuild [172.18.4.219] port 22. debug1: Connection established. debug1: identity file /Users/Denise/.ssh/identity type -1 debug1: identity file /Users/Denise/.ssh/id_rsa type 1 debug1: identity file /Users/Denise/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.5 debug1: match: OpenSSH_5.5 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.1 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-cbc hmac-md5 none debug1: kex: client->server aes128-cbc hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host '3dbuild' is known and matches the RSA host key. debug1: Found key in /Users/Denise/.ssh/known_hosts:43 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Next authentication method: publickey debug1: Trying private key: /Users/Denise/.ssh/identity debug1: Offering public key: /Users/Denise/.ssh/id_rsa Connection closed by [ip] It shows the same output, and fails at the same place, whether I have put my public key on the ssh server or not. Any help would be appreciated-- hopefully someone has run into this before?

  Read the article

• Is it possible to download extremely large files intelligently or in parts via SSH from Linux to Windows?

  - by Andrew

  I have a ~35 GB file on a remote Linux Ubuntu server. Locally, I am running Windows XP, so I am connecting to the remote Linux server using SSH (specifically, I am using a Windows program called SSH Secure Shell Client version 3.3.2). Although my broadband internet connection is quite good, my download of the large file often fails with a Connection Lost error message. I am not sure, but I think that it fails because perhaps my internet connection goes out for a second or two every several hours. Since the file is so large, downloading it may take 4.5 to 5 hours, and perhaps the internet connection goes out for a second or two during that long time. I think this because I have successfully downloaded files of this size using the same internet connection and the same SSH software on the same computer. In other words, sometimes I get lucky and the download finishes before the internet connection drops for a second. Is there any way that I can download the file in an intelligent way -- whereby the operating system or software "knows" where it left off and can resume from the last point if a break in the internet connection occurs? Perhaps it is possible to download the file in sections? Although I do not know if I can conveniently split my file into multiple files -- I think this would be very difficult, since the file is binary and is not human-readable. As it is now, if the entire ~35 GB file download doesn't finish before the break in the connection, then I have to start the download over and overwrite the ~5-20 GB chunk that was downloaded locally so far. Do you have any advice? Thanks.

  Read the article

• Nagios check_host_alive and check_ping not showing host as down

  - by Kyle

  I am using the check_host_alive command to send 5 packets every minute to all my routers at remote locations. I noticed today I received a notification from The AT&T Global Client Support Center that a router was down (which can take 5-30 minutes to send these notices out) and never received a notice from Nagios. I went onto Nagios and it is was showing the host as alive with a latency of 0ms. This tells me it is seeing the automated response from my router in the data center that, "TTL expired in transit" as a reply from the remote router. Is there anyway for me to tell nagios to check where the reply is comming from? I feel like other people have to of had this issue... I tested it with the check_ping command and it produced the same results. I have the command defined has %hostname% and the proper IP in the host definition, and it works fine for telling me the latency is high. Any ideas are welcome, I have already exercised my Google skills with no results. EDIT: root@IM-UBTU:/# /usr/local/nagios/libexec/check_ping -H 192.168.250.1 -w 100.0,10% -c 200.0,20% -vvv CMD: /bin/ping -n -U -w 10 -c 5 192.168.250.1 Output: PING 192.168.250.1 (192.168.250.1) 56(84) bytes of data. Output: From 10.69.10.2 icmp_seq=1 Time to live exceeded It knows something is wrong why doesn't it give me a warning?

  Read the article

• Setting the default permissions for files uploaded via FTP to a directory

  - by Kerri

  Disclaimer: I'm just a web designer/coder, and server admin stuff is my weakest point of them all. So be easy on me (and very specific). I'm using a simple CMS (Unify) on a site, where part of the functionality is that the client can upload files to a specified directory (using FTP). The permissions for the upload directory are set to 755. But when files are uploaded through the interface, they are uploaded with permissions set to 640 (instead of 644), so site visitors cannot acces the files. When I emailed the CMS's support about this, they told me that it was a server setting, and I need to make sure that files uploaded through FTP are set to 644. Makes perfect sense, but I have no idea how to do this. Any help would be greatly appreciated. This site is a shared site hosted by Network Solutions (Unix), so my access options are limited. I can edit .htaccess files, and php.ini, but that's about all I have access to. It appears I can't even log on via shell. ETA: 11/11/2010 Thanks all. I was able to work around this problem by setting up the CMS's settings in a different way. I'd be interested in following up on Nick O'Niel's suggestions, because I think he's on the right track, but unfortunately I can't access the necessary files on this particular server. So, anyway, I'm leaving this open, since the original questions isn't exactly resolved. Unfortunately, I probably can't put a correct answer to the test, since the shared server in question has nearly all of its config files tightly locked down.

  Read the article

• Spring-mvc project can't select from a particular mysql table

  - by Dan Ray

  I'm building a Spring-mvc project (using JPA and Hibernate for DB access) that is running just great locally, on my dev box, with a local MySQL database. Now I'm trying to put a snapshot up on a staging server for my client to play with, and I'm having trouble. Tomcat (after some wrestling) deploys my war file without complaint, and I can get some response from the application over the browser. When I hit my main page, which is behind Spring Security authentication, it redirects me to the login page, which works perfectly. I have Security configured to query the database for user details, and that works fine. In fact, a change to a password in the database is reflected in the behavior of the login form, so I'm confident it IS reaching the database and querying the user table. Once authenticated, we go to the first "real" page of the app, and I get a "data access failure" error. The server's console log gets this line (redacted): ERROR org.hibernate.util.JDBCExceptionReporter - SELECT command denied to user 'myDbUser'@'localhost' for table 'asset' However, if I go to MySQL from the shell using exactly the same creds, I have no problem at all selecting from the asset table: [development@tomcat01stg]$ mysql -u myDbUser -pmyDbPwd dbName ... mysql> \s -------------- mysql Ver 14.12 Distrib 5.0.77, for redhat-linux-gnu (i686) using readline 5.1 Connection id: 199 Current database: dbName Current user: myDbUser@localhost ... UNIX socket: /var/lib/mysql/mysql.sock -------------- mysql> select count(*) from asset; +----------+ | count(*) | +----------+ | 19 | +----------+ 1 row in set (0.00 sec) I've broken down my MySQL access settings, cleaned out the user and re-run the grant commands, set up a version of the user from 'localhost' and another from '%', making sure to flush permissions.... Nothing is changing the behavior of this thing. What gives?

  Read the article

• Membership in two domains

  - by imagodei

  Hello! I would your suggestions for an effective solution for a person, who needs to access resources in two Windows domains and wants to use one computer. It's about our CEO, who has accepted a second position in another company. Accessing files and folders isn't big problem. The greatest challenge I see is that he wants to conveniently access Exchange accounts in both companies; he would like to send and receive mail in single Outlook if possible (two profiles?) There is also a challenge with calendars: he would like to have one calendar for all activities from both Exchange accounts. Creating a POP3 account for accessing second Exchange server is a last resort, because obviously there is a problem with scheduling meetings and other calendar related tasks. Forwarding and receiving all mail/tasks on primary Exchange server is inconvenient because simple replying to original sender is disabled; and also when manually changing the recepient, he will receive mail from the wrong address. We were considering Virtualisation, that is setting up an instance of virtual machine inside existing installation and then joining this virtual computer to a second domain. Then installing another MS Outlook. This would of course mean two different Outlook accounts, two different calendars, but would at least enable our CEO to access all information from a single laptop. Does anyone have any other idea? I know setting up two domains on a single computer is a no-go (without much hacking at least), but effective workarounds are appreciate. The thing I am looking here is high usage/efficiency/productivity, but also as elegant solution from the administration point of view. Thank you very much (if you managed to read this through, this is a good sign ^_^ )

  Read the article

• iMac 20inch (Mid 2007) SL DVD Boot Prohibitory Sign

  - by Caitlann Lloyd

  iMac 20inch (Mid 2007 Build) with Ubuntu 12.0.4 How I got in this situation I had a perfectly healthy Intel iMac running Snow Leopard several months ago. Then I got the dreaded spinning gear and several kernel panics. After getting a little frustrated (failing to find a solution online), I found an old macbook installation disk and used it to access Disk Utility. From here, I erased my entire hard drive leaving me with no OS. I then created a Ubuntu DVD and installed Ubuntu onto the system. Now, on Ubuntu, I wine installed Transmac and burned a Single layer copy (with languages, etc. removed to save space) of Snow Leopard onto a 4.7GB DVD. I tried to boot from it and was met with first the grey apple screen and a spinning cog before the grey apple shortly turned into the infamous prohibitory sign. Note: I met this problem previously when using Disk Utility to create a bootable USB of Snow Leopard, hence I severely doubt it has anything to do with the DVD created. Resources at my disposal 1 x iMac running Ubuntu 6 x 4.7GB DVDs 1 x USB Stick 12GB 1 x Windows 7 Laptop Resources I do not have Firewire cables Access to a prebuilt retail disk (Misplaced) Access to another Mac Apple Warranty I would be hugely grateful if someone was able to tell me how to install Snow Leopard again.

  Read the article

• Apache runs in console but not as a service?

  - by danspants

  I have an apache 2.2 server running Django. We have a network drive T: which we need constant access to within our Django app. When running Apache as a service, we cannot access this drive, as far as any django code is concerned the drive does not exist. If I add... <Directory "t:/"> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> to the httpd.conf file the service no longer runs, but I can start apache as a console and it works fine, Django can find the network drive and all is well. Why is there a difference between the console and the service? Should there be a difference? I have the service using my own log on so in theory it should have the same access as I do. I'm keen to keep it running as a service as it's far less obtrusive when I'm working on the server (unless there's a way to hide the console?). Any help would be most appreciated.

  Read the article

• VLAN for WiFi traffic separation (new to VLANing)

  - by Philip

  I run a school network with switches in different departments. All is routed through to a central switch to access the servers. I would like to install WiFi access points in the different departments and have this routed through the firewall (an Untangle box that can captive-portal the traffic, to provide authentication) before it gets onto the LAN or to the Internet. I know that the ports that the APs connect to on the relevant switches need to be set to a different VLAN. My question is how do I configure these ports. Which are tagged? Which are untagged? I obviously don't want to interrupt normal network traffic. Am I correct in saying: The majority of the ports should be UNTAGGED VLAN 1? Those that have WiFi APs attached should be UNTAGGED VLAN 2 (only) The uplinks to the central switch should be TAGGED VLAN 1 and TAGGED VLAN 2 The central switch's incoming ports from the outlying switches should also be TAGGED VLAN 1 and TAGGED VLAN 2 There will be two links to the firewall (each on its own NIC), one UNTAGGED VLAN 1 (for normal internet access traffic) and one UNTAGGED VLAN 2 (for captive portal authentication). This does mean that all wireless traffic will be routed over a single NIC which will also up the workload for the firewall. At this stage, I'm not concerned about that load.

  Read the article

• VLAN Tagging Traffic on Cisco Switch

  - by David W

  I have a situation where I'm setting up multiple VLANS on a pfSense firewall on the same physical interface for a client. So in pfSense, I now have VLAN 100 (employees) and VLAN 200 (students - student computer lab). Downstream from pfSense, I have a Cisco SG200 switch, and coming off of the SG200 is the student lab (running on a Catalyst 2950. Yes, that's old, but it works, and this is a poor nonprofit we're talking about). What I'd like to do is tag everything on the network as VLAN 100, except for the student computer lab. Earlier today when I was on-site with the client, I went into to the old Catalyst 2950, and assigned all of its ports to access VLAN 200 (switchport mode access vlan 200) without setting up a trunk on the Catalyst or on the SG200. Looking back on it, I now understand why internet in the lab broke. I reverted the lab back to the default VLAN1 (we're still running on a different firewall - we haven't deployed pfSense -, and the traffic is still separated physically). So my question is, what do I need to do in order to properly deploy this scenario? I believe the correct answer is: Ensure VLANs 100 and 200 are setup in pfSense, and that DHCP is operating correctly (on separate subnets) Setup a trunkport VLAN that allows both 100 & 200 traffic, and plug that port directly into pfSense. Setup a VLAN 200 trunkport on the SG200 (It's not running iOS, but if it were, the command would be switchport trunk native vlan 200), which will then plug into the Catalyst 2950. Setup a VLAN 200 trunkport on the Catalyst 2950 (that is plugged into the SG200 VLAN200 port with the same command - switchport trunk native vlan 200) Setup the rest of the ports on the old Catalyst 2950 in the lab to be access ports on VLAN200. Is there anything that I'm missing, or do I need to tweak any of these steps, in order to properly segment the network traffic?

  Read the article

• Setting up squid proxy server to in turn connect using another proxy server [closed]

  - by AnkurVj

  My institute uses the Squid proxy server and authentication mechanism requires username and password to be entered. This means that, I can log in on only one machine at a time and Internet access for me is restricted to that machine. I sometimes require Internet access on multiple machines simultaneously. What previosuly worked for me was the following : On one of my own machines A, I set up a Squid proxy server that allowed all local machines without any username and password. I configured rest of the machines to use this machine A as the proxy server. On machine A I logged into the institute proxy server using my browser. This way, I could access Internet from all my machines, by effectively channeling my requests through the server A. Recently, I lost that machine and configuration and now I tried to set it up again in the same manner. However, I cant seem to remember exactly how I made it work. I keep getting Connection Refused (111) on other machines. My guess is that my squid server isnt able to forward requests from other machines to the actual squid server. I could use any help for debugging this problem. I don't want to use alternatives such as ssh tunneling. This solution has worked for me in the past, I just don't remember how to set it up the same way again.

  Read the article

• Mavericks permission issues with Windows Server deduplicated shares

  - by dmohlmaster

  We have a number of 10.9-10.9.3 - Mavericks - machines installed throughout our facility. Much of the user content is pulled from shares stored on our Windows Server 2012 fileservers with deduplication enabled. I have found that files newly written or unoptimized are able to be accessed without issue - read, written, modified, etc. Once the file gets optomized/deduplicated and Windows adds the P & L attributes - sparse and symlink - the Macs running Mavericks begin to have access issues. Once the files get deduplicated, users begin receiving read access errors when copying files (see error1 below). This happens when copying to folders within the current folder tree or copying somewhere to the local system. If you 'stop' the copy operation and retry a few more times, it may eventually work for the specific instance but fail again later. I am however, able to copy these files without issue via the terminal. Other systems running 10.7 do not experience the same issues and are able to access file server resources without issue. Many of the systems having issues are newer and thus not able to be downgraded to 10.8 or 10.7. I have tried finder replacements such as Pathfinder but the results are the same. I know this is at least similar to the issues many Mac users are already experiencing and posting about but I haven't seen it directly linked to deduplication and the attributes written by Windows server. Has anyone seen this issue? Have any solutions been found? Error 1: When copying files after the PL attributes have been set by deduplication. "One or more items can't be copied to "Foler" because you don't have permissions to read them. ******************************************' Via the system.log, I am also seeing the following error when accessing these deduplicated file shares. The reparse point tag listed below is "IO_REPARSE_TAG_DEDUP" Reported error: "smbfs_nget: filename.ext - unknown reparse point tag 0x80000013"

  Read the article

• OpenLDAP ACLs are not working

  - by Dr I

  First things first, I'm currently working with an OpenLDAP: slapd 2.4.36 on a Fedora release 19 (Schrödinger’s Cat). I've just install the openldap with yum and my configuration is the following one: ##### OpenLDAP Default configuration ##### # ##### OpenLDAP CORE CONFIGURATION ##### include /etc/openldap/schema/core.schema include /etc/openldap/schema/cosine.schema include /etc/openldap/schema/inetorgperson.schema include /etc/openldap/schema/nis.schema pidfile /var/lib/ldap/slapd.pid loglevel trace ##### Default Schema ##### database mdb directory /var/lib/ldap/ maxsize 1073741824 suffix "dc=domain,dc=tld" rootdn "cn=root,dc=domain,dc=tld" rootpw {SSHA}SECRETP@SSWORD ##### Default ACL ##### access to attrs=userpassword by self write by group.exact="cn=administrators,ou=builtin,ou=groups,dc=domain,dc=tld" write by anonymous auth by * none I launch my OpenLDAP service using: /usr/sbin/slapd -u ldap -h ldapi:/// ldap:/// -f /etc/openldap/slapd.conf As you can see it's a pretty simple ACL which aim to allow access to the userPassword attribute to a specific group read only, then to the owner read and write to anonymous requiring auth and refuse the access to everyone else. The problem is: Even using a valid user with correct password my ldapsearch ends with zero informations retrieved from the directory, plus I've got a strange response on the result line. # search result search: 2 result: 32 No such object # numResponses: 1 here is the ldapsearch request: ldapsearch -H ldap.domain.tld -W -b dc=domain,dc=tld -s sub -D cn=user,ou=service,ou=employees,ou=users,dc=domain,dc=tld I did not specify any filter as I want to check that ldapsearch is correctly printing only allowed attribute.

  Read the article

• Running phpmyadmin xampp Ubuntu 12.10

  - by Luigi Tiburzi

  I know it is a common problem and there are many solutions on the web but I'm trying everything and anything is working, I can't have phpmyadmin running on my machine. I installed XAMPP through: sudo tar xvfz ./Downloads/xampp-linux-1.8.1.tar.gz -C /opt then I did the chmod trick supposed to make an end to access issues and I change the default location to my php projects from /var/www to Dropbox/php. Then I started XAMPP in the usual way: sudo /opt/lampp/lampp start When I tried to run one of my php projects the output on the web is fine but if for example I try to write localhost on my browser I get: It works and not the usual XAMPP interface and most of all when I try to access localhost/phpmyadmin I get the login page, insert username (root) and password and I get: You don't have permission to access /phpmyadmin/index.php on this server. Apache/2.2.22 (Ubuntu) Server at localhost Port 80 I tried the Required all granted trick and some others but nothing is working. I even tried to uninstall phpmyadmin and reinstall it but this is not working too. I don't know hot to proceed. Thanks for your help.

  Read the article

• Accessing a shared folder in Windows Server 2008 R2.

  - by Triztian

  Hello all, seems my involvement with computers has grown and I've found my self in the need to access a shared folder on a server. I've read some documentation and managed to set up the folder as a share, for this I created a local group and for now just one local user that has access to the share, the folder is in the public user folder and it's permissions should be (and I believe they are) read/write. The problem is that I can't connect from a remote machine I mean I don't know how the way it should be accessed, the server has a public IP and we use it also as a host to our website I don't know if that affects it though, the folder will be used as the "keeper" for the QuickBooks company files and has the database server manager installed. I've tried setting up a VPN Connection to the but no success. The server has a domain name a "http://www.example.com" that redirects to our website, I am unsure if it could be accessed that way, also the share has a location displayed when I right-click properties Heres what I've tried Setting up a VPN Connection (Windows Vista and 7) Got to the point where I got asked for credential and entered the user I created (which is not an admin) but I got a "Connection fail error 800" I suppose this is because in the domain field I entered the servers workgroup. right-click add network connection (Windows 7) Went through the wizard until I reached the point of entering the location, tried many things, the name in the share's properties(\\SOMETHING\Share), the http://www.example.com , the IP address I'm quite unfamiliar with this, so I have my guesses: Since the group and user are local they do not have access to the folder. The firewall in the server is blocking my connection. Anyways, any help and guidence is truly appreciated.

  Read the article

• Getting Win32_Service security descriptor using VBScript

  - by invictus

  Hi, I am using VbScript for retrieving the securitydescriptor of a Win32_Service. I am using the following code: SE_DACL_PRESENT = &h4 ACCESS_ALLOWED_ACE_TYPE = &h0 ACCESS_DENIED_ACE_TYPE = &h1 strComputer = "." Set objWMIService = GetObject("winmgmts:" _ & "{impersonationLevel=impersonate, (Security)}!\\" & strComputer & "\root\cimv2") Set colInstalledPrinters = objWMIService.ExecQuery _ ("Select * from Win32_Service") For Each objPrinter in colInstalledPrinters Wscript.Echo "Name: " & objPrinter.Name ' Get security descriptor for printer Return = objPrinter.GetSecurityDescriptor( objSD ) If ( return <> 0 ) Then WScript.Echo "Could not get security descriptor: " & Return wscript.Quit Return End If ' Extract the security descriptor flags intControlFlags = objSD.ControlFlags If intControlFlags AND SE_DACL_PRESENT Then ' Get the ACE entries from security descriptor colACEs = objSD.DACL For Each objACE in colACEs ' Get all the trustees and determine which have access to printer WScript.Echo objACE.Trustee.Domain & "\" & objACE.Trustee.Name If objACE.AceType = ACCESS_ALLOWED_ACE_TYPE Then WScript.Echo vbTab & "User has access to printer" ElseIf objACE.AceType = ACCESS_DENIED_ACE_TYPE Then WScript.Echo vbTab & "User does not have access to the printer" End If Next Else WScript.Echo "No DACL found in security descriptor" End If Next However, every time I run it I get the message saying the resulting code is -2165236532 something, rather than the error codes defined in the manual. Anyone got any ideas? I am using Windows 7 professional.

  Read the article

• ADSL Modem/Router sometimes hands out incorrect IP addresses

  - by Peter Keevill

  My setup is as follows:- Main ADSL modem / router (switch) configured as DHCP server with address range 192.168.0.25-60 The office machines are configured with fixed IP ( not in the same address pool of course ) and hard wired to this router. A wireless access point ( Router ) is connected to provide Internet access for guests in a separate area. This router is NOT configured as a DHCP server. Wireless authentication is turned off. IP address lease times are set to 4 hours. Sometimes guests are able to connect to the wireless access point but they are not given a valid IP. They get 169.x.x.x addresses. Rebooting their machines does not resolve the problem. The only way to resolve is to reboot the main ADSL/router which is often frustrating for other users who are successfully connected with valid IP and DG. The problem seems to occur more frequently to Apple/Mac guests although it also sometimes occurs with Win machines. I personally use Ubuntu on my Laptop and thus far, never have had any problem connecting and getting a valid IP address in the guest area. One further point of note which may give a clue is that certain guests ( always Apple/Mac ) get lease times of 90 days. However, this does not 'stack out' the number of available addresses and of course, rebooting the router clears them until the next time they login.

  Read the article

• VPN on a ubuntu server limited to certain ips

  - by Hultner

  I got an server running Ubuntu Server 9.10 and I need access to it and other parts of my network sometimes when not at home. There's two places I need to access the VPN from. One of the places to an static IP and the other got an dynamic but with DynDNS setup so I can always get the current IP if I want to. Now when it comes to servers people call me kinda paranoid but security is always my number one priority and I never like to allow access to the server outside the network therefor I have two things I have to have on this VPN. One it shouldn't be accessiable from any other IP then these 2 and two it has to use a very secure key so it will be virtually impossible to bruteforce even from the said IP´s. I have no experience what so ever in setting up VPNs, I have used SSH tunneling but never an actuall VPN. So what would be the best, most stable, safest and performance effiecent way to set this up on a Ubuntu Server? Is it possible or should I just set up some kind of SSH Tunnel instead? Thanks on beforehand for answers.

  Read the article

• WAMP starts Apache or Mysql, but not both?

  - by ladenedge

  When I install WAMP, the Apache and Mysql services are set to run as the LocalService user and all works well. However, because I need to access remote UNC paths in my PHP code, I need to run at least Apache as a user that exists on both the local host and the remote host - I'll call him WampUser. When both Apache and Mysql are set to start as WampUser, I cannot start both at the same time. If both are stopped, I can start either successfully. When I attempt to start the other, I get Error 1053: The service did not respond to the start or control request in a timely fashion. This error appears immediately - there is no timeout. When at least one of the services is set to start as LocalService, both start fine. I can, therefore, solve my problem by setting Apache to WampUser and Mysql to LocalService, but I'm more interested in why this is happening in the first place. I'm especially curious because this situation does not occur on other servers - something I've done to this server has made these two services exclusive when running as the same user. Here are some miscellaneous data points: I am using Windows Server 2003. I've provided recursive Full Control to the C:\wamp directory for WampUser. Nothing appears in the event log after the service fails. No log entries appear in either the Mysql log or the Apache error log. Neither application appears in the process list when the appropriate service is stopped. Any ideas?

  Read the article

< Previous Page | 485 486 487 488 489 490 491 492 493 494 495 496  | Next Page >