Search Results

Search found 1470 results on 59 pages for 'hangs'.

Page 49/59 | < Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >

• Windows XP hanging on login screen

  - by Nathan W

  I have been given two Eee PC 100HA to manage for some people, they are both running the same hardware and XP home but one is having some strange problems with logging on. The main problem is that it hangs at the login screen for ages and sometimes never gets to the desktop. The strange thing is it only seems to do it after the computer has been cold started, but it won't do it if the computer has been restarted. I have made two logs of the start up with process monitor but every time the logger is attached the computer will log in fine. I have also set the computer to blue screen and create a crash dump when you press ctrl scroll twice but when I do it at the hung login it just sits at a black screen and I don't get a crash dump, I have turned off the auto system restart on failure option also. I can usually fix most computer start up and shutdown problems but this one has got me stuffed. Has anyone had the same problems before, or can recommend something that I can try? Cheers.

  Read the article

• Issues connecting to HP ProCurve switches

  - by BriGuy

  We are having a very strange issue trying to connect to our infrastructure switches via SSH. When you first try connecting to them, the switches will prompt for the password - and then just sit there after it is entered. If you create a second SSH session to the switch (while letting the first one remain open and just sitting there) it will let you log right in. The switches are doing the same thing with RADIUS and local authentication. The other strange part to all of this, is that about 10 switches started doing it all at the same time. As far as actual configuration of the switches, nothing has changed. Occasionally, one switch will start working like normal, but then stop again. These are all HP ProCurve managed switches, but all different models/firmware. Some switches that are not working are using the same firmware as others that are working. UPDATE: 20130312 I am also seeing this same behavior when trying to use telnet. The first telnet session just hangs there, and the second telnet session will let me log in. Rebooting the switches seems to get them working, but I still have 5 production switches that cannot easily be rebooted because of their production roles. Is anyone aware of anything else that can be switched on/off that may reset the logon for remote management or something like that?

  Read the article

• Wireless very slow on one laptop on network, all other machines normal?

  - by th3dude19

  My new laptop (Acer Aspire Timeine 3810TZ running Windows 7 Home Premium 64bit) is acting very strange on my wireless network. Below are the issues I'm noticing... The connection frequently drops. I see the icon change from 'full bars' to 'empty bars with yellow star (meaning no connection)' occasionally. Almost every website I visit (Firefox) hangs for a long time on 'Looking up www.amazon.com' for example. After a long pause, it finally starts loading the website. Neither of these problems exist on any other machines on my network. I also have a desktop running the same OS wirelessly and it works fine. I've run several Speedtest.net tests and the speeds are great (20MBit down/4 up). Results from pingtest.net are as follows: Line quality: D Ping: 46ms Jitter: 65ms Packet Loss: 9% These results are to a server that is less than 10 miles from my residence. The results on the other machines in my house are normal. Any suggestions? This is becoming very annoying as I purchased this machine primarily for browsing.

  Read the article

• Generic/Text Printer on Windows 7 not prompting for file name

  - by Trevor Tippins

  Hope someone can shed some light on this. I am downloading reports from an AIX-based system by directing them to a TT printer which the terminal emulator (MultiView 2000) intercepts and directs to the default printer on the local system. This local printer is configured as a vanilla Generic/Text printer attached to a FILE port. When I print from AIX, the output is spooled down and the local printer prompts for a file name into which to save the file...but not under Windows 7. This has worked fine for many years, on both Win2K and WinXP. However, on Windows 7 the output gets spooled as a file into spool\PRINTERS (and looks as expected) but the print job then hangs with a status of "Error - Printing" and never prompts for a file name. I have to cancel the job. The Generic/Text printer works as expected with other applications. I have tried setting the printer to print directly rather than spooling but this only serves to hang the terminal session too. I've also tried to run the emulator in Windows 2000 Compatibility Mode and as Administrator in case it was something like that but with no luck. As you might expect, it does work fine in XP Mode (as long as I print to a printer defined therein and not the host's printer) but operationally this isn't going to be an option. Obviously this emulation software is a decade old (at least) and I could just cross/upgrade all the users (at a cost) but, before I do so, has anyone seen this sort of behaviour before and found some sort of fix? Remote OS: AIX 5 Client OS: Windows 7 Pro (32-bit) Printer: Generic/Text on a FILE port TE Software: MultiView 2000 (32-bit) Thanks in advance.

  Read the article

• processes slow after some time of actively running

  - by Yervand Aghababyan

  i have several cron jobs running on an ubuntu machine. each one does some pretty heavy load stuff. The cron jobs are parsing files and the bigger the file the longer it takes them to parse it. The strange thing is that if i make the files too big ( like 30mb) the script kind of hangs. It starts processing them really enthusiastically but after some time (something like 5-10 minutes) the cpu usage of the process drops a lot and it gets into some "zombie" state. If prior to this the process in htop was using 70-80% of the CPU then after this drop occurs it slows down to something like 5-10%. the load average drops down as well. The status of the processes sometimes changes to D in htop, which AFAIR stands for zombie. Today i noticed the same behavior of processes of mysql when executing heavy queries (a query took something like 4 hours to execute). the cron jobs are mostly php and during their processing most of the CPU eats the php process and not mysql. so i think the issue is not with a specific language/program but with the way the processes are "managed". The only other place i've seen similar behavior was on my Amazon EC2 micro instance when after some aggressive use of CPU the CPU quota was taking effect and everything was slowing down dramatically. This is a dedicated machine running ubuntu. what may be the cause?

  Read the article

• xcopy Not Surpressing File/Directory Query

  - by Daniel Bingham

  Hey folks, I'm attempting to use xcopy to copy over a file from one machine to another on our network as part of a Java program. I'm calling xcopy like this: xcopy "C:\Program Files\path\to\my\file" "\\othermachine\c$\Documents and Settings\<myUserName>\Desktop\Test\path\in\directory\structure\to\file" /e /y /i Because I'm calling it from with in Java, I need all the prompts to be suppressed. For the most part, \i and \y have done exactly that. However, for this one file /i fails and I get the file or directory prompt. The result is that it hangs the entire program. I've also tried calling it with /s /t /q appended on to the existing options, to no avail. Why isn't /i working to suppress the File or Directory prompt? Is there an order I need to call the options in? Is there something else I need to do? EDIT: I should mention, the file is a text file - single line of text. It does not have an extension. It looks like this: FILE-NAME

  Read the article

• Sparc Solaris 2.6 will not boot

  - by joshxdr

  I have a very old Sparc Solaris network that was working fine last week, but after a power outage none of the workstations will boot. The network looks like this: host A: solaris 2.6, shares /export/home to network by NFS host B: solaris 8, runs NIS server. Mounts /export/home/ by NFS. host C: RHEL5, shares /share to network by NFS. Mounts /export/home/ by NFS. I figured that the main problem was host A, since you need the home directories available for the other workstations to boot(?). Host A does not mount anything by NFS as far as I know. However, this workstation will NOT boot. The OBP bootup sequence looks like this: Boot device <blah> configuring network interface le0 Hostname <hostname> check file system <everything ok> check ufs filesystem <everything ok> NIS domainname is <name> starting router discovery starting rpc services: rpcbind keyserv ypbind done setting default interface for multicast: add net 224.0.0.0: gateway <hostname> <HANGS at this point> Is there some kind of debug mode so that I can get more detail as to why the workstation won't boot? Is my network structure inherently susceptible to power outage? Is there a way I can boot up to command line so I can at least turn off the NFS mounting?

  Read the article

• SQL Server Unattended Install through SSH

  - by Samuel

  I'm trying to install SQL Server from the command line through Cygwin open-ssh. The install works when I log onto the server as Administrator and execute the script through a Cygwin shell, but the install doesn't work when I SSH into the machine using Administrator's credentials and run the exact same command. I've already verified that the SSHD process is running as the Admistrator, and I've verified that the install script is indeed starting under Administrator. Is there something different with the terminal in SSH vs. the Cygwin terminal on the machine that would cause this problem? Specifically what's failing is Sql Server install runs for a while then hangs with a MSI error 1622. "Error opening installation log file. Verify that the specified log file location exists and is writable." If I run both installs, I've noticed that they have different authentication id's in ProcMon, but they have the exact same command line parameters. There has to be something in SSH that is causing permissions issues... Any ideas?

  Read the article

• Hung Java JVM failing to respond to kill -3

  - by Hans

  I have a Java VM that is hanging "randomly". I quote the randomly bit, because there is obviously a reason that the VM is hanging, but the hang does not occur periodically. We have the same software running in different customer environments and in those environments the JVM is not hanging. In the process of attempting to troubleshoot the hang the process exists with zero CPU utilization. I then attempt to execute kill -3 and the kill command hangs. No JVM Thread Dump is produced. I have spent time instrumenting the code to periodically log the thread stack traces hoping to catch the JVM in a state that would indicate where the issue lies, but so far this attempt has not born much fruit. Unfortunately I have not been able to reproduce this issue in my lab environment so I am limited by what can be done at the Customer site. The OS's in question are Red Hat Enterprise 5.4 and SUSE 10 running java version 1.6.0_05-b13 Has anyone had this problem? Any ideas on why kill -3 is failing to produce a Java Thread Dump? Thanks!

  Read the article

• Starting programs from terminal then exiting terminal exits started programs?

  - by sherrellbc

  I really was unsure how to phrase the question title. What I mean is that when I use the terminal to start a program, most of the time when the terminal is closed it also exits the programs started from it. Now this makes sense if we look at it from a hierarchical standpoint of the terminal being the parent process which spawns child processes, and any halt of the parent causes subsequent halting of the children as well. However, I've noticed this to not always be the case. For example, I downloaded Sublime Text Editor and created a symlink in PATH. I can start this program by issuing a sublime command from the terminal, but subsequent closure of the terminal program does nothing to sublime. However, other times either the child process that was started it also closed or it hangs up and causes problems. tl;dr: Is it always the case that programs started from a closed parent process will be closed when the parent is exited? And if so, is there way to start a program from the terminal and then close the terminal without exiting the started process? The whole point here is to start programs from the terminal so I do not overly-populate my desktop with symlinks.

  Read the article

• Microsoft Office 2003 applications crash on 'Save As' to a network mapped drive

  - by Archit Baweja

  Hey guys, so I'm not sure if it belongs on ServerFault forums so figured I'd ask here first because its a workstation/client side issue. I have a client where we have windows server 2003 setup, with windows xp professional setup on all the workstations. We've setup a 'domain' and all workstations logon to the domain (authenticated by the Windows Domain Controller), and in the logon script we map drives on to each workstation. Everything is working peachy except for one workstation, where when I open a file in excel from a mapped drive, it opens fine, but when I go to hit Save As, the Save As dialog pops and hangs up. I cannot perform any other action in excel. When I try cancel the Save As dialog, excel crashes. The mapped drive opens up fine in Windows Explorer. To further investigate this issue, I created a new blank text document on the network drive in Windows Explorer. I then opened it. Then hit save as, and the Save As dialog opened up fine and it would let me save the document. I repeated the above steps for a word document. However this time the Save As dialog hung/froze again. So I'd imagine its a Microsoft Office Issue. Any ideas?

  Read the article

• SATA DVD drive refuses to read movie DVDs

  - by poke

  Hey, I have a problem with my DVD Drive (Asus DRW-2014L1T, most current firmware installed) on Windows 7 x64. When I insert a DVD movie and Windows starts to access the drive (for autoplay, or when I manually click on the drive icon), my computer hangs up in a particular way, while trying to read the disk. Explorer stops reacting and several programs won't run or their launch is horribly delayed (like the device manager). In th end, I can't access the movie and can't even eject the disk (probably because Windows is still trying to access it). To get the disk out of the drive I then have to reboot (which sometimes doesn't work either) and eject the disk before Windows boots. BIOS recognizes the drive just fine, and Windows is also able to read data disks (tried it with some software disks), but just refuses any movies. I have checked the region code in the device manager, but it is correct. My notebook is reading the disks just fine btw.. I remember having the same problem with an older drive as well, but I don't remember what I did to make it work again (maybe I didn't even fix the problem back then). I do remember however that booting with the disk inserted made Windows recognize the disk, however this doesn't work in this situation either. Do you have any idea what to do to fix that problem?

  Read the article

• Mac OS X will only upload zero-byte files through FTP

  - by tabacitu

  I'm using Mac OS X Lion and i've been having this problem with FTP (any FTP client, mind you. I tried Transmit, FileZilla, Cyberduck and the Terminal, all with the same result) I can browse files in my FTP Client, but when I upload files, the client hangs for a few seconds, then thinks it uploaded the files successfully, but it only creates a new file with one blank line in it. Sometimes, it manages to upload 4-5 lines. It then returns: 226 - Error during read from data connection 226 Transfer aborted But 2xx is a success message. It is not a server issue, since any Windows machine will upload just fine using the same network. Can anybody figure out what the problem is? It renders my mac useless for web development. The problem persists with SFTP and FTP with SSL/TLS. Later edit: Solved! Ok, turns out the problem goes away when I take out my router and connect directly through PPPoE. So the problem is with the router, I thought. But no, the problem is with the mac that connects through a router that connects through a PPPoE and tries to upload using FTP. Pretty specific, I know. The problem is with the MTU (maximum transmission unit). Apparently, mac os x breaks the file into chunks that are too large for the router to send, because the router's MTU was set lower than Mac OS X's. My router's was 1492, which is ok, but my Mac's MTU was 1500, which is unacceptable. I don't even understand why it works directly with PPPoE. Anyway, if you encounter the same problem, this is how you diagnose and fix it: In terminal, run: ifconfig | grep mtu to see what the MTU is for en0 (or en1, mine was en0) If it's 1500, run sudo ifconfig en0 mtu 1300 This should solve it. If so, it may only be until the next restart. You can also change the MTU in System Preferences \ Network \ Ethernet - Advanced \ Hardware

  Read the article

• OpenVPN + iptables / NAT routing

  - by Mikeage

  I'm trying to set up an OpenVPN VPN, which will carry some (but not all) traffic from the clients to the internet via the OpenVPN server. My OpenVPN server has a public IP on eth0, and is using tap0 to create a local network, 192.168.2.x. I have a client which connects from local IP 192.168.1.101 and gets VPN IP 192.168.2.3. On the server, I ran: iptables -A INPUT -i tap+ -j ACCEPT iptables -A FORWARD -i tap+ -j ACCEPT iptables -t nat -A POSTROUTING -s 192.168.2.0/24 -o eth0 -j MASQUERADE On the client, the default remains to route via 192.168.1.1. In order to point it to 192.168.2.1 for HTTP, I ran ip rule add fwmark 0x50 table 200 ip route add table 200 default via 192.168.2.1 iptables -t mangle -A OUTPUT -j MARK -p tcp --dport 80 --set-mark 80 Now, if I try accessing a website on the client (say, wget google.com), it just hangs there. On the server, I can see $ sudo tcpdump -n -i tap0 tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on tap0, link-type EN10MB (Ethernet), capture size 96 bytes 05:39:07.928358 IP 192.168.1.101.34941 > 74.125.67.100.80: S 4254520618:4254520618(0) win 5840 <mss 1334,sackOK,timestamp 558838 0,nop,wscale 5> 05:39:10.751921 IP 192.168.1.101.34941 > 74.125.67.100.80: S 4254520618:4254520618(0) win 5840 <mss 1334,sackOK,timestamp 559588 0,nop,wscale 5> Where 74.125.67.100 is the IP it gets for google.com . Why isn't the MASQUERADE working? More precisely, I see that the source showing up as 192.168.1.101 -- shouldn't there be something to indicate that it came from the VPN? Edit: Some routes [from the client] $ ip route show table main 192.168.2.0/24 dev tap0 proto kernel scope link src 192.168.2.4 192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.101 metric 2 169.254.0.0/16 dev wlan0 scope link metric 1000 default via 192.168.1.1 dev wlan0 proto static $ ip route show table 200 default via 192.168.2.1 dev tap0

  Read the article

• Routing for remote gateway over VPN in Vista/7 broken?

  - by Raymond

  Hi, Situation is as follows. Home computer running Windows 7, sets up VPN connection (LT2P + IPSec, "use remote gateway" disabled) to office. Subnet is 192.168.64.x Office has Draytek Vigor 2920 router, subnet is 192.168.32.x What happens? - VPN connection itself works fine - Can ping any machine on the remote network - When trying to open a webpage from a host in the remote network, the remote server logs the incoming request, but the browser hangs on "waiting for..." and eventually times out. I have observed this problem on Windows Vista and Windows 7. On Windows XP however there is no problem like described above. The only clue I have is that there is a difference in the routing between XP and Vista/7. The output of "route print" on Windows XP looks like this: (See www.latunyi.com/routing_xp.png) So here the gateway for the 192.168.32.x subnet is the IP address that the local computer has in the remote network. The output of "route print" on Windows 7 (and Windows Vista) looks like this: (See www.latunyi.com/routing_win7.png") Now the gateway for the 192.168.32.x subnet is the IP address of the VPN router (32.1). I don't know if that causes this trouble, but it seems a bit strange. Enabling "use default gateway on remote network" doesn't make a difference. Using the new option "Disable class based route addition" in Windows 7 only makes the route to the VPN router disappear. I am really puzzled here. I assume the VPN routing can't be broken in both Vista and Windows 7, and this should just work without manually adding routes. I hope someone has a solution for this problem :-). Thanks!

  Read the article

• clocksource tsc unstable

  - by amorfis

  Ok, now I have real server fault ;) After some time from booting (about one minute) my server hangs. All I can do is hard reset. Then after restart in /var/log/kern.log I can find: Jul 29 22:38:57 leonidas kernel: [ 90.729598] longhaul: Failed to set requested frequency! Jul 29 22:38:57 leonidas kernel: [ 90.731252] longhaul: Enabling "Ignore Revision ID" option. Jul 29 22:38:57 leonidas kernel: [ 91.201461] longhaul: Failed to set requested frequency! Jul 29 22:38:57 leonidas kernel: [ 91.201482] longhaul: Disabling ACPI C3 support. Jul 29 22:38:57 leonidas kernel: [ 91.204230] longhaul: Disabling "Ignore Revision ID" option. Jul 29 22:38:58 leonidas kernel: [ 91.416133] longhaul: Failed to set requested frequency! Jul 29 22:38:58 leonidas kernel: [ 91.416152] longhaul: Enabling "Ignore Revision ID" option. Jul 29 22:38:58 leonidas kernel: [ 91.960048] Clocksource tsc unstable (delta = -105611479 ns) I found some resources on the net, and it said to change clocksource, or disable ACPI. I tried disabling ACPI but it didn't help (but I noticed there was longer time before hanging). I can't change clock to hpet, because my system doesn't have such one. Output of cat /sys/devices/system/clocksource/clocksource0/available_clocksource: acpi_pm jiffies tsc My system is ubuntu server on VIA Epia hardware.

  Read the article

• IIS FTP 7.5 Data Channel Problem (SSL)

  - by user59050

  Hey there I wonder if anyone can get me in the right direction. I am setting up both a FTPS Client and Server, FTPS Server using Microsoft’s iis FTP 7.5. On the client side it will be running on Linux and I am using M2crypto for the openssl wrapping (python). I am worried the problem is on the server side (iis7.5) due to the following discovery : If I host using Filezilla with BOTH the control and data channel being forced to be encrypted it works 100% (100% file transmission), if i use iis as the server everything works up to the point when the data channel takes over... i.e. all data of the retrieved file is already received correctly in my basket! The ftp server just won't send the final '226 Transfer complete.' on the cmd socket. Why? If i force the client or server to close the connection the file is 100% intact....If i use iis 7.5 with forced encryption on control channel all works 100% as long as i don’t force data channel... Here are some screenshots to demo this... Client View after Kill Client : pics @ http://forums.iis.net/p/1172936/1960994.aspx#1960994 Summary : We can establish the connection, do directory listings, start the upload, see the file (0bytes) created on the server but then the client hangs. If we terminate the client, the uploaded file on the server suddenly jumps up to full size.

  Read the article

• Ubuntu 10.04 on virtualbox gives error: Target filesystem doesn't have /sbin/init \ No init found. Try passing init= bootarg

  - by Philip

  I'm a linux newbie and the only reason I have it installed is so I can stop having Windows incompatibility issues with Ruby on Rails. Having said that, it sure has been nice, and much faster, and I don't think I'll be doing any Winrails stuff anytime soon. So I created a virtualmachine using virtualbox and have had ubuntu on it for the last 3 weeks. Recently ubuntu asked if it could update a few things, I clicked 'ok'. Now it won't boot and I get this error: *mount: mounting /dev on /root/dev failed: No such file or directory mount: mounting /sys on /root/sys failed: No such file or directory ... Target filesystem doesn't have /sbin/init. No init found. Try passing init= bootarg BusyBox v1.13.3... (initramfs) _ * So I cruised the forums and there are a variety of solutions, but they all have to do with booting from the live cd. (which I assume is the ISO image I used to install ubuntu in the first place). But when I boot from that CD, it just hangs on the ubuntu screen, and the little dots keep cycling white to red, but it hung there for an hour so I think it was stuck. Not sure what I can do; can I do anything from the busybox shell (or whatever that is) to fix things? The thing is, it took about 10 hours to get everything the way I needed with all the gems and whatnot. And I didn't really write down what I tweaked, and I'm middle aged, so all that information has leaked out by now and I don't want to do it again. I'd really like to repair my existing install. One question you might have is, is there something wrong with the ISO? I don't think so, because I made a new virtual machine and used that same iso file to install a fresh ubuntu. Any help much appreciated. Phil

  Read the article

• Cannot connect to MySQL on RDS (Amazon Web Services) from my laptop

  - by Bruno Reis

  I'm having some trouble connecting to a MySQL 5.1 server on an RDS instance on AWS from my laptop. The detailed description of the problem is here: https://forums.aws.amazon.com/thread.jspa?messageID=323397 In short: I have 2 MySQL servers, both with the same db configuration and firewall (security group) configuration. One of them works fine: I can connect to it from my EC2 instances (ie, from inside the AWS cloud) and from my laptop. The other one doesn't: I can connect from my EC2 instances but not from my laptop. The symptom: a connection attempt from my laptop just hangs, and then times out, as if there was a firewall blocking me (ie, silently dropping my SYN packets). I must say that everything has been working fine for a very long time, and this problem began suddenly, 3 days ago, without any modifications to DB parameters or the security groups. My current analysis of the situation: The firewall (ie, security group) cannot be the problem: both MySQL servers share the same firewall configuration -- I can connect to one of them but not to the other. Later on, I even added a rule to allow inbound connections from 0.0.0.0/0 (ie, I turned off the firewall), and nothing. Oh, I also created a new, fresh security group and changed this instance's SG to the new one (to which I first added my ip address, and then 0.0.0.0/0) but still nothing. The credentials cannot be the problem: I use the same from my laptop and from my EC2 instances -- and the user (which is what Amazon calls master user), in the database, has a host of '%'. MySQL is not blocking my IP due to, say, too many failed connection attemps: I've FLUSH HOSTS on the database, and also I tried to connect using many different source IP addresses, even from all around the world through a VPN proxy service. What could I be missing? I'm asking here because it's been about 36 hours since I've posted on AWS forums but got no answer at all over there... someone here might have a solution! Any input is really appreciated, I'm out of ideas. Thanks!

  Read the article

• OpenVPN + iptables / NAT routing

  - by Mikeage

  Hi, I'm trying to set up an OpenVPN VPN, which will carry some (but not all) traffic from the clients to the internet via the OpenVPN server. My OpenVPN server has a public IP on eth0, and is using tap0 to create a local network, 192.168.2.x. I have a client which connects from local IP 192.168.1.101 and gets VPN IP 192.168.2.3. On the server, I ran: iptables -A INPUT -i tap+ -j ACCEPT iptables -A FORWARD -i tap+ -j ACCEPT iptables -t nat -A POSTROUTING -s 192.168.2.0/24 -o eth0 -j MASQUERADE On the client, the default remains to route via 192.168.1.1. In order to point it to 192.168.2.1 for HTTP, I ran ip rule add fwmark 0x50 table 200 ip route add table 200 default via 192.168.2.1 iptables -t mangle -A OUTPUT -j MARK -p tcp --dport 80 --set-mark 80 Now, if I try accessing a website on the client (say, wget google.com), it just hangs there. On the server, I can see $ sudo tcpdump -n -i tap0 tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on tap0, link-type EN10MB (Ethernet), capture size 96 bytes 05:39:07.928358 IP 192.168.1.101.34941 > 74.125.67.100.80: S 4254520618:4254520618(0) win 5840 <mss 1334,sackOK,timestamp 558838 0,nop,wscale 5> 05:39:10.751921 IP 192.168.1.101.34941 > 74.125.67.100.80: S 4254520618:4254520618(0) win 5840 <mss 1334,sackOK,timestamp 559588 0,nop,wscale 5> Where 74.125.67.100 is the IP it gets for google.com . Why isn't the MASQUERADE working? More precisely, I see that the source showing up as 192.168.1.101 -- shouldn't there be something to indicate that it came from the VPN? Edit: Some routes [from the client] $ ip route show table main 192.168.2.0/24 dev tap0 proto kernel scope link src 192.168.2.4 192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.101 metric 2 169.254.0.0/16 dev wlan0 scope link metric 1000 default via 192.168.1.1 dev wlan0 proto static $ ip route show table 200 default via 192.168.2.1 dev tap0

  Read the article

• Firefox won't start

  - by Daniel R Hicks

  OK, I've got this problem again, only this time the problem only seems to affect Firefox and Thunderbird. Rebooted several times. Tried resetting to the last restore point, but that didn't work. Tried setting a new Firefox profile, and that didn't work either. The symptom is that you click on the Firefox or Thunderbird icon, the process appears in the Process Explorer list, but the window never opens. Curiously, if Firefox has been "started" this way, Internet Explorer hangs starting until I kill the Firefox process. Any ideas? I suppose the next thing to try is uninstalling and reinstalling Firefox/Thunderbird, but this whole thing is getting old. The box is a Sony Vaio running Windows Vista. It was completely restored from scratch less than two weeks ago, after the last fiasco. (I'm suspecting that my aborted install of Acronis True Image may have mucked things up this time.) Sigh! Another symptom: It occurred to me to try printing something, but if I open "Printers" it just sits there "searching". So something is rotten in the bowels of Windows. Minor update: It occurred to me to kill Internet Explorer (where I'd attempted printing). Then Printers comes up fairly quickly -- with no printers defined. Clicking "Add a printer" does nothing. Update: Well, following this suggestion to stop and restart the print spooler brought the printers back. And, wonder of wonders, Firefox now starts OK. Stopping and restarting the print spooler!!

  Read the article

• Blocking of certain file downloads

  - by Philip Fourie

  I have a problem where I cannot completely download a certain file from a server. The file is 1.9MB in size but only 68% is downloaded and then it hangs. I tried and these cases, which failed: Downloaded the file with HTTP Downloaded the file with FTP Moved the file to different FTP and web servers behind the ISA firewall Tried with IIS 6.0 & IIS 7.0 Multiple download clients. Which included FireFox, FileZilla (on Windows) and wget (on Linux) This worked: Downloading other files from the same location on the server. Both bigger and smaller and in size than the original. FTP and HTTP worked. Earlier version of this file (.DLL) works. It is as if the content of this file has an influence on this file being served. Network architecture: Client Machine - Internet (ISP) - ISA Server - IIS 7.0 The only constants are the ISP, Cisco router and the ISA server. Is it possible that something is rejecting the download because of the contents of the file? I am hoping ISA is the culprit... I am not a ISA expert is there somewhere I can look to establish if it is indeed ISA causing this? Update: Splitting the file into two parts with a hex editor results in one half of the file being served correctly and the other part not. Zipping the file results in the file being downloaded successfully. However this is not an option for this particular scenario. Renaming the file and its extension also doesn't work. Update 2009/10/22: It does NOT seems to be ISA that is causing this problem. We connected a laptop (running IIS) on an available public IP and still the file download to 68% before it hanged. The two remaining components are the ISP and the Cisco 800 series router. Anyone knows about an issue on the router perhaps?

  Read the article

• Laptop seemingly randomly "freezes" to the point of no longer executing applications

  - by Aierou

  After upgrading to Windows 8 pro on my Samsung Series 7 Chronos NP700Z5C-S04US (may be relevant, I'm not sure), my computer began to stop allowing the execution of any service or application, as well as discontinuing the update of the clock until a hard shutdown was performed. This seems to occur randomly after periods of inactivity and I've no idea the cause. These are measures I have already taken in order to attempt to stop this: -Obviously Googling potential answers to this problem -Updating all drivers -Researching all events that have occurred around the time of the failure to respond (with no results) -I tried applying "bcdedit /set disabledynamictick no" which was a hotfix for what seemed to be the same error but was not. Here is some more, potentially related, information about the error: -No BSOD (actually, I haven't at all experienced a BSOD with Windows 8) -Computer seems to have a problem shutting down/restarting most of the time (Hangs at the point where it should completely turn off) -New sound instances are not able to play, but previously loaded containers function properly -As mentioned before, the clock freezes at the time of the error -USB devices function properly -Servers that I was running fail to respond on my end, but stay online. If you require more information, please request it specifically and I will be happy to oblige. Thanks.

  Read the article

• Rescue system running TFS that BSODs, into vmware esxi

  - by 3molo

  Hi, After moving to new facilities, one of our old Dell servers running Windows Server 2003 R2 on PowerEdge 2650 HW BSODs with 0x8e. The server runs Team Foundation Server, so we have a few guys dependent on it. No one here knows TFS, so we have no idea how difficult it would be to setup from scratch. We have the MSSQL database(s) backed up, recent and fresh copy. Tried removing/refitting memory modules, but with no success. The system boots into safe mode but hangs occasionally. I booted a linux livecd and did a dd of both c: and d:, so I have all the data in compressed images on a vmware machine. For the guest, I created a 38G (actually it became 40GB) partition to act as C:, and booted a live cd. I then uncompressed the compressed disk image of c: and dd'd it to the new c: using 'gunzip -dc c.img.gz | dd of=/dev/sda1 bs=1M'. The operation ran for about 1000 seconds, and completed successfully. I assumed it would at least try to boot windows (but most likely BSOD due to not having correct drivers), but the Vmware ESXi guest does not seem to recognize it as a bootable disk. We don't have the vmware enterprise license, so the vmware converter cold cloning is not an option. Did I do something wrong in my dd's etc with the ISOs, or why would it not (try to) boot? Am I wasting my time? What other approach is there? Will continue to try to remove services and drivers to make the physical machine at least work reasonably well in safe mode. What do you suggest? 1. Continue to get the dd'd images to the virtual disk and get it to boot. 2. Install a new windows server, get team foundation server and restore from backup. 3. Focus on the old problematic hardware Any help appreciated

  Read the article

• What could cause Windows 7 to hang whenever I install something?

  - by Larsenal

  I've had this problem when installing several different programs (iTunes, Adobe Acrobat Reader just to name two). Regardless of what the program is, the install usually gets at least 90% through the process and then just hangs. I don't see anything bad in the event log besides the following (and this didn't occur exactly at the time of install): wuaueng.dll (964) SUS20ClientDataStore: A request to write to the file "C:\Windows\SoftwareDistribution\DataStore\DataStore.edb" at offset 16252928 (0x0000000000f80000) for 32768 (0x00008000) bytes succeeded, but took an abnormally long time (185 seconds) to be serviced by the OS. This problem is likely due to faulty hardware. Please contact your hardware vendor for further assistance diagnosing the problem. I've run check disk and it passed. I've had some problems with BIOS settings in the past with Windows 7, but I'm not sure whether that could be related. Update... I also see this error in the event log: Volume Shadow Copy Service error: Unexpected error querying for the IVssWriterCallback interface. hr = 0x80070005, Access is denied. . This is often caused by incorrect security settings in either the writer or requestor process. Operation: Gathering Writer Data Context: Writer Class Id: {e8132975-6f93-4464-a53e-1050253ae220} Writer Name: System Writer Writer Instance ID: {33493f01-ac1b-4efb-a378-3053ab03100d} One last wrinkle.... I see "Previous versions" of c:\ which look like they correspond to the time of attempted installation.

  Read the article

< Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >