Search Results

Search found 17267 results on 691 pages for 'home router'.

Page 49/691 | < Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >

  • Is it worth putting high-performance drives in a home NAS?

    - by Jon M
    I'm looking at a QNAP NAS setup, and in the options for disks they have the very enterprisey Western Digital RE3. I'll be using the box for backing up my laptop, and streaming media either to the laptop or a media device using the built-in media server, possibly both at once. My question is, would I notice any benefit at all in splashing out for the high-performance drive, or should I stick with something quiet and cool (and cheap) like the Caviar Green?

    Read the article

  • Can I add a gigabit switch to my D-Link WiFi router for gigabit networking? [migrated]

    - by Elmer
    I currently have a D-Link DIR-628 router in my home network that I use for wifi and local networking. However, I am looking to upgrade to a gigabit network as the data transfer speed between my network devices is too slow since the router only supports 10/100. Can I simply add a small gigabit switch (like the Netgear GS105) to the router and connect all local network devices to the gigabit switch ports instead of the router's ports or do I need to replace the entire router to a gigabit router?

    Read the article

  • Folding at home: how to check the actual bonus credited?

    - by netvope
    In the past I've completed many SMP Core A2 units, but I haven't been folding since A3 was out. Now I'm running SMP Core A3 on Linux. HFM.NET shows that I should be getting a certain amount of bonus credit, but somebody pointed out that it is only a prediction. How can I check the amount of actual bonus credited to my account for each completed unit?

    Read the article

  • How to stream TV/Films/Music over the internet to various devices from a home server?

    - by ritch0s
    Set up: An always on old-ish laptop connected to a NAS which contains TV/Films/Music. I want to be able to stream on the fly the data on my NAS to various connected devices such as iphone or laptop. I am currently using Orb (orb.com) mycast software but the requirements for the streaming are very high in terms of processing power is there alternative software and dedicated hardware i can add to get maximum benefit from this setup?

    Read the article

  • How to fix "ruby installation is missing psych (for YAML output)." on CentOS?

    - by ohho
    After rvm installation on CentOS 5.8: [rails@localhost ~]$ rvm -v rvm 1.16.17 [rails@localhost ~]$ which ruby ~/.rvm/rubies/ruby-1.9.3-p286/bin/ruby [rails@localhost ~]$ ruby -v ruby 1.9.3p286 (2012-10-12 revision 37165) [i686-linux] [rails@localhost ~]$ which gem ~/.rvm/rubies/ruby-1.9.3-p286/bin/gem there is a warning: $ gem -v /home/rails/.rvm/rubies/ruby-1.9.3-p286/lib/ruby/1.9.1/yaml.rb:56:in `<top (required)>': It seems your ruby installation is missing psych (for YAML output). To eliminate this warning, please install libyaml and reinstall your ruby. 1.8.24 I followed some advice: $ rvm pkg install libyaml Fetching yaml-0.1.4.tar.gz to /home/rails/.rvm/archives Extracting yaml-0.1.4.tar.gz to /home/rails/.rvm/src Prepare yaml in /home/rails/.rvm/src/yaml-0.1.4. Configuring yaml in /home/rails/.rvm/src/yaml-0.1.4. Compiling yaml in /home/rails/.rvm/src/yaml-0.1.4. Installing yaml to /home/rails/.rvm/usr Please note that it's required to reinstall all rubies: rvm reinstall all --force and then: $ rvm reinstall all --force Removing /home/rails/.rvm/src/ruby-1.8.7-p371... Removing /home/rails/.rvm/rubies/ruby-1.8.7-p371... No binary rubies available for: centos/5.8/i386/ruby-1.8.7-p371. Continuing with compilation. Please read 'rvm mount' to get more information on binary rubies. Installing Ruby from source to: /home/rails/.rvm/rubies/ruby-1.8.7-p371, this may take a while depending on your cpu(s)... ruby-1.8.7-p371 - #downloading ruby-1.8.7-p371, this may take a while depending on your connection... ruby-1.8.7-p371 - #extracting ruby-1.8.7-p371 to /home/rails/.rvm/src/ruby-1.8.7-p371 ruby-1.8.7-p371 - #extracted to /home/rails/.rvm/src/ruby-1.8.7-p371 Applying patch /home/rails/.rvm/patches/ruby/1.8.7/stdout-rouge-fix.patch Applying patch /home/rails/.rvm/patches/ruby/1.8.7/no_sslv2.diff ruby-1.8.7-p371 - #configuring ruby-1.8.7-p371 - #compiling ruby-1.8.7-p371 - #installing Removing old Rubygems files... Installing rubygems-1.8.24 for ruby-1.8.7-p371 ... Installation of rubygems completed successfully. Saving wrappers to '/home/rails/.rvm/bin'. ruby-1.8.7-p371 - #adjusting #shebangs for (gem irb erb ri rdoc testrb rake). ruby-1.8.7-p371 - #importing default gemsets (/home/rails/.rvm/gemsets/) Install of ruby-1.8.7-p371 - #complete Please be aware that you just installed a ruby that requires 2 patches just to be compiled on up to date linux system. This may have known and unaccounted for security vulnerabilities. Please consider upgrading to Ruby 1.9.3-286 which will have all of the latest security patches. Making gemset ruby-1.8.7-p371 pristine. Making gemset ruby-1.8.7-p371@global pristine. Removing /home/rails/.rvm/src/ruby-1.9.3-p286... Removing /home/rails/.rvm/rubies/ruby-1.9.3-p286... No binary rubies available for: centos/5.8/i386/ruby-1.9.3-p286. Continuing with compilation. Please read 'rvm mount' to get more information on binary rubies. Installing Ruby from source to: /home/rails/.rvm/rubies/ruby-1.9.3-p286, this may take a while depending on your cpu(s)... ruby-1.9.3-p286 - #downloading ruby-1.9.3-p286, this may take a while depending on your connection... ruby-1.9.3-p286 - #extracting ruby-1.9.3-p286 to /home/rails/.rvm/src/ruby-1.9.3-p286 ruby-1.9.3-p286 - #extracted to /home/rails/.rvm/src/ruby-1.9.3-p286 ruby-1.9.3-p286 - #configuring ruby-1.9.3-p286 - #compiling ruby-1.9.3-p286 - #installing Removing old Rubygems files... Installing rubygems-1.8.24 for ruby-1.9.3-p286 ... Installation of rubygems completed successfully. Saving wrappers to '/home/rails/.rvm/bin'. ruby-1.9.3-p286 - #adjusting #shebangs for (gem irb erb ri rdoc testrb rake). ruby-1.9.3-p286 - #importing default gemsets (/home/rails/.rvm/gemsets/) Install of ruby-1.9.3-p286 - #complete Making gemset ruby-1.9.3-p286 pristine. Making gemset ruby-1.9.3-p286@global pristine. Too bad, the warning is still there: $ gem -v /home/rails/.rvm/rubies/ruby-1.9.3-p286/lib/ruby/1.9.1/yaml.rb:56:in `<top (required)>': It seems your ruby installation is missing psych (for YAML output). To eliminate this warning, please install libyaml and reinstall your ruby. 1.8.24 How can I get rid of the warning? UPDATE: (applying rvm reinstall 1.9.3 --movable) $ rvm reinstall 1.9.3 --movable Removing /home/rails/.rvm/src/ruby-1.9.3-p286... Removing /home/rails/.rvm/rubies/ruby-1.9.3-p286... Fetching yaml-0.1.4.tar.gz to /home/rails/.rvm/archives Extracting yaml-0.1.4.tar.gz to /home/rails/.rvm/src Prepare yaml in /home/rails/.rvm/src/yaml-0.1.4. Configuring yaml in /home/rails/.rvm/src/yaml-0.1.4. Compiling yaml in /home/rails/.rvm/src/yaml-0.1.4. Installing yaml to /home/rails/.rvm/rubies/ruby-1.9.3-p286 Installing Ruby from source to: /home/rails/.rvm/rubies/ruby-1.9.3-p286, this may take a while depending on your cpu(s)... ruby-1.9.3-p286 - #downloading ruby-1.9.3-p286, this may take a while depending on your connection... ruby-1.9.3-p286 - #extracting ruby-1.9.3-p286 to /home/rails/.rvm/src/ruby-1.9.3-p286 ruby-1.9.3-p286 - #extracted to /home/rails/.rvm/src/ruby-1.9.3-p286 Applying patch /home/rails/.rvm/patches/ruby/1.9.3/ruby-multilib.patch Error running 'patch -F 25 -p1 -N -f -i /home/rails/.rvm/patches/ruby/1.9.3/ruby-multilib.patch', please read /home/rails/.rvm/log/ruby-1.9.3-p286/patch.apply.ruby-multilib.log There has been an error applying the specified patches. Halting the installation. Making gemset ruby-1.9.3-p286 pristine. Making gemset ruby-1.9.3-p286@global pristine.

    Read the article

  • Go Big or Go Home

    - by user12601034
    For those who don’t know, Oracle sponsors a group called “OWL” – Oracle Women’s Leadership - and the purpose of the group is to create local and global opportunities that support, educate and empower current and future women leaders at Oracle. This week, I had the opportunity to attend the Denver OWL roadshow, and I was really impressed with the quality of speakers and interactions that I experienced. One theme that arose throughout the day was that of “Lean In.” In a nutshell, “Lean In” requires you to take advantage of the opportunities that you’re given. One of my personal mantras is “Go big or go home."  That is, if you’re not willing to give it your all, don’t do it at all. Regardless of how you phrase it, it’s a life lesson that I believe needs to be tossed in our face every so often simply, if for no other reason, to get our attention. You are given a finite amount of time in your life; in your job role; in your interactions with others. Do you make the most of the opportunities given to you every day? Or do you believe that life just happens, and you have to deal with whatever is handed to you? I have a challenge for you. Set aside any concerns or fears you have about something and Lean In. Make the most of an opportunity presented to you…or make your own opportunity! If you start with just one thing, you’ll start building a mindset to make the most of additional opportunities. Not only will you be better for leaning in, but I’m betting that those around you will be better for it as well.

    Read the article

  • On the frontier between work and home

    - by MPelletier
    I think we've all been there: You hear of someone say "hey, wouldn't it be nice if platform X had feature Y?" You look around (on SO!), the feature really doesn't exist, even though it probably would be useful in many contexts. So it's pretty generic. Your mind wanders for a bit. "How tough would it be? Well, it'd probably be just a snippet. And an ad-hoc function. And maybe a wrapper." And boom, before you know it, you've spent a dozen hours of your free time implementing a FooFeature that's really neat and generic. The kind of code you might not even have the time to spit and shine at work, that would be a bit rushed and not so documented. So now you wonder "wouldn't this be useful to others?" And you've got your blog, maybe a CodeProject account, and your colleague who asked if FooFeature exists might, haphazardly, come accross that blog entry, had it existed before they told you. On the otherhand, the NDA agreement. It's sort of vague and general. It doesn't forbid you from coding at home, but it's clear on sharing company code, that's a big NO. But this isn't company code. Or is it? Or will it be? So, what do you do with code (that's more than just a snippet) you wrote in your off time with universality in mind but an idea that came from work, and that will most likely be used at work? Can it be published?

    Read the article

  • How to recover bad encripted directory

    - by Fato Alessandro
    I had a problem while formatting Ubuntu. I tried to reinstall without formatting the home directory and with the same username. The home directory of the new installation was set to be encrypted. Then the installation went wrong because of the cd. So it really never started (stopped at coping stage). How ever Ubuntu did encrypted the home directory but probably the procedure went wrong. By now I installed Ubuntu in another partition, tried to mount with encrypted-recovery but the mounted directory in tmp wasn't the directory I had before. There were just strange directories with coded name. Strange fact is that the file system is not damaged: it continues to know how much data is actually stored in it. If I look with gparted or even nautilus I see 45 Gb of data present on the partition. This let me think that my data are not erased but maybe hidden. Moreover when I tried to mount the encrypted home directory with encrypted-recovery-personal it asked me the encryption secret. I insert nothing, just pressed enter, and the password was accepted. Is thre a method for removing my data? Maybe trying to rencrypt the directory? How could I get back to the previous documents. Thanks to everyone

    Read the article

  • How to setup Java-Home and Path in Ubuntu 12.04

    - by ur truly friend
    we are new to Ubuntu.Recently we changed my server OS to ubuntu 12.04 from windows 7 . every one have their own login details. one of my college installed Open-Jdk7. I asked him, where you installed JAVA, then he suggested to switch the following directory su root cd /usr/lib/Jvm Totally 3 folders are there in JVM folder. names are. java-1.7.0-openjdk-amd64 java-7-openjdk-amd64 java-7-openjdk-common generally, If you install Java in Windows, we will get 2 folder. 1 folder is for JDKand another points to JRE. but, in Ubuntu we have 3 folders. is it right? for my conformation, whether he installed correctly or not. I open Terminal. I run the following 2 commands javac java -version both commands are working fine. now I want to set-up Java-Home and Path for all users at same place.because everyone is working on Application server. Can anyone explain step-by-step. Thanks.

    Read the article

  • Configuring Team Foundation Server Basic on Home Server.

    - by Enrique Lima
    For the installation I selected only the Team Foundation Server role. Then, I opened the Team Foundation Server Administration Console (which I think is a great addition and improvement over the way TFS was configured in the past) to proceed with the configuration of the pieces. Once I selected the Configure Installed Features, the Configuration Center opened up. Now, the choices … In my implementation here I just want to take advantage of Source Control primarily.  I want to be able to store my code and projects.  So, Basic it is! So, the Basic Configuration Wizard opens up.  Now the options to configure are very limited, but we have to provide details for the SQL Server Instance. And now, to select Install SQL Server express.  If you want to take advantage of another system in your environment to host your database, well you could Use an existing SQL Server Instance. Once it has the details it needs, you get a Summary view to confirm your choices. Once, you click next or verify, it runs readiness checks on your system to make sure the installation will have a successful pass.  And we love GREEN! Now, since got the green flag, our next stop is to let the wizard do its magic, click on Configure.  And once again, we love GREEN! We click Next, and … We like a big Green Success sign … We close the Configuration Center … First results … Web Access …  Nothing to show … but we are there! And all this running from a Microsoft Home Server installation.

    Read the article

  • Two routers on the same network

    - by qroberts
    My ISP has supplied me with a modem/router all in one and it isn't very good. It loses its settings and dies frequently. So I have another router in my apartment (Linksys wrt310n) that is connected to the modem via LAN-LAN port connections. I want to give my Linksys router the DHCP role and also have the ISP modem DMZ everything to the Linksys router. I want to be able to have all computers connected to both routers on the same network as well. I have been able to make it so that the Linksys has a DMZ to it from the ISP modem, but ISP modem LAN port - Linksys WAN port, so they were on different networks. Is there a way to have it so that both of them are on the same network but the Linksys router handles DHCP and port forwarding?

    Read the article

  • Browser automatically refreshes and Home folder window opens

    - by Vikash
    I am facing a very strange problem. Out of the blue, my browser starts refreshing itself infinitely. My first guess was firefox is messing up. I installed chrome. But, it happens in chrome as well. Other than that, sometimes my home folder automatically opens and keep opening itself infinitely. My next guess was Mouse is faulty. Replace the mouse - but same things. This happens even if I remove my keyboard. What can be the reason? This started happening after I installed Ubuntu 10.10 few days back. Earlier on windows, everything was working fine. So, I am a bit skeptical to assume that this is a hardware fault. How to fix this problem? UPDATE: xev gives this kind of result: KeyPress event, serial 36, synthetic NO, window 0x4200001, root 0xb8, subw 0x0, time 29897358, (237,791), root:(1252,842), state 0x10, keycode 65 (keysym 0x20, space), same_screen YES, XLookupString gives 1 bytes: (20) " " XmbLookupString gives 1 bytes: (20) " " XFilterEvent returns: False KeyRelease event, serial 36, synthetic NO, window 0x4200001, root 0xb8, subw 0x0, time 29897603, (237,791), root:(1252,842), state 0x10, keycode 65 (keysym 0x20, space), same_screen YES, XLookupString gives 1 bytes: (20) " " XFilterEvent returns: False

    Read the article

  • Server and Network Lag

    - by DanSpd
    At my home I have a server and my computer. Server has Windows Server 2008 Standart 64 bit installed and then my computer has Windows 7 64 bit installed. My home router is DIR-615 My server has a game server installed on it and basically total open connections on server are around 700. Once its around 700 server and then whole home network lags really badly. My internet connection is good and only around 600kb/s is being used out of 2mb/s (real download/upload speeds). So far I assume that my router has a connection limit and with server + my computer connections it peaks at around 1k and lags everything. Another assumption server lag comes from connection limit. On the internet I have read that standart version of server has connection limit of 700 + 10 reserved. I do not rmember where I found that information but it was on microsoft website. So I have two options. First is to upgrade my router to Netgear FVS318G-100 and second is to change connections limit on server. Any advices? Thank you

    Read the article

  • Can I attach a VPN firewall to an existing network and have it manage VPN connections?

    - by jules
    I'm quite new to networking and am trying to set up my first VPN connection. The Situation: I have been contracted for some programming at a facility some distance from my location. I would like to be able to set up a simple VPN connection to their network so that I may make adjustments without significant travel. Their Current Network: Six devices (one I need to connect to) plugged into a basic router (Dlink). This router has an internet connection and a static ip address. My Hopeful (questionable) Proposal: I attach a VPN Firewall I happen to own (Netgear FVS318) as device number seven on the client network. I disable routing / DHCP in the Netgear. I forward the appropriate IPSec ports from the Dlink to the Netgear. I then create a VPN connection on my office Windows 7 machine to the remote network. The request is forwarded from the Dlink to the Netgear where the VPN connection is authenticated. I now have a remote-access connection from my office PC to the client's local network. The Question: Will this proposal work? If not, would another possibility be to attach a computer with a VPN server to the client network? Also, as a note: the client has requested I not replace their router or place mine in-between theirs and the internet :( Thanks very much!

    Read the article

  • Mac Mini's internet very slow, every other device fine (PC, iPhone, Xbox 360)

    - by alex
    I recently haven't used my Mac Mini for about 5 days (however it was left on). I seem to be able to connect and get great download / upload speeds through my PC, Xbox 360, iPhone and parents' laptop. However, my Mac Mini is very slow. OS X's Mail.app is downloading mail at 0.4kbps and then dropping to 0. Skype file transfers are doing the same. Browsing the net is a terrible experience. It is taking 30 seconds or more to download basic pages. All of my devices connect wirelessly to a Netgear router / modem. I have tried giving the Mac Mini a manual IP, and renew DHCP lease, as well as flush DNS in Terminal. I have also rebooted the router / modem twice, and the Mac Mini twice. Do you know what could be causing this? Thanks Update This is very weird. It is also very slow accessing localhost (setup through MAMP) and also slow to access the Netgear router config pages.

    Read the article

  • Mac OS X - configuring ntpd server with on LAN with D-Link DIR-655

    - by Mark C
    Hey all, This question is pretty specific, but I hope someone will have seen this error elsewhere. I a configuring a machine running OS X 10.5.8 to be an NTP server for machines connected to a LAN that is not connected to the Internet. I am not too worried about knowing the "right" time on all the machines, but rather worried about making sure everyone has the same notion of time. I configured the NTP daemon on Mac by turning on the Set date and time automatically in System Preferences, using the server's clock, 127.127.1.0 as the reference clock. I figured I should see if the server can NTP query itself before proceeding to the clients. The weird part is when I run the ntpq -p command in a command-prompt when connected to my D-Link DIR-655 (firmware: 1.33), it hangs for about a minute or so each time before finally giving me some output. I thought the problem might have to do with Port Forwarding, so I configured the router to forward port 123 for the IP of the server, but that did not improve the situation. When I run the ntpq -p command on my school's network, on a Linksys WRT54G router, or with the wireless Airport card turned off - I have absolutely no problems - the command returns a response instantly. Is this normal? I can see why a query might take a minute or so, but I don't understand why one router does it faster than the other. I tried messing around with the ntp.conf file adding the burst, minpoll, and maxpoll options: server 127.127.1.0 burst minpoll 4 maxpoll 5 Figuring that perhaps I am polling too often and the configuration file is slowing me down, but even with this, the ntpq still hangs on the D-Link DIR-655, but does just fine on the other routers. Any thoughts on where the lag is coming from or if the lag is even a problem?

    Read the article

  • Why am I unable to reach local network computers, but able to browse the web?

    - by Igor Zinov'yev
    I have a weird problem. Today after turning my Ubuntu 9.10 PC on I can't connect to my local network, but I can use the Internet. We have a single Windows 2003 server machine that acts as a local main DNS server, DHCP server and a domain controller. Although it seems to give me the local IP address, I can not ping it, as well as any other machine on the net. I have tried all of the below and it didn't help: Rebooting; Reconnecting to the network; Forcing the dhclient to renew the IP address; Deleting and creating new connection profiles; Plugging my machine into another network outlet; Maybe it has something to do with routing, because I have tampered with routing tables the day before, but the tables seem ok to me: $ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.0.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 vboxnet0 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 Our LAN uses a D-Link DI-604 router, and it looks to me as if I am connected to the network outside the router. I can not even access its administration page. Please at least suggest what I can do to solve this. P.S. What seems strangest to me is that I can access the PC in question from outside the network by opening a port on the router. I have managed to ssh to it from outside, but I still can't ping nothing on the inside. P.P.S Today I tried reinstalling network-manager with --purge option, but it did no good. After that I created a new DCHP reservation for my PC in order to change my local IP, but that didn't change anything either. My PC is able to get a DHCP offer, but then it's unable to connect to any local computers. I am desperate.

    Read the article

  • Destination NAT Onto the Same Network from internal clients

    - by mivi
    I have a DSL router which acts as NAT (SNAT & DNAT). I have setup a server on internal network (10.0.0.2 at port 43201). DSL router was configured to "port forward" (or DNAT) all incoming connections to 10.0.0.2:43201. I created a virtual server for port forwarding on DSL router. I also added following iptables rules for port forwarding. iptables -t nat -A PREROUTING -p tcp -i ppp_0_1_32_1 --dport 43201 -j DNAT --to-destination 10.0.0.2:43201 iptables -I FORWARD 1 -p tcp -m state --state NEW,ESTABLISHED,RELATED -d 10.0.0.2 --dport 43201 -j ACCEPT # ppp_0_1_32_1 is routers external interface. # routers internal IP address is 10.0.0.1 and server is setup at 10.0.0.2:43201 Problem is that connections coming from external IP addresses are able to access internal server using External IP address, but internal clients (under NAT) are not able to access server using external IP address. Example: http://<external_address>:43201 is working from external clients But, internal clients are not able to access using http://<external_address>:43201 This seems to be similar to the problem described in http://www.netfilter.org/documentation/HOWTO/NAT-HOWTO-10.html (NAT HOW-TO Destination NAT Onto the Same Network). Firstly, I am not able to understand why is this a problem for internal clients? Secondly, what iptables rule will enable internal clients to access server using external IP address? Please suggest.

    Read the article

  • port forwarding problem

    - by Claudiu
    I want to set up an svn server on my computer, so it's available from anywhere. I think I set up the repository correctly, using CollabSVN. If I go to Repo-Browser with TortoiseSVN and point it to svn://localhost:3690, it shows the proper repository. The problem now is that I'm behind a router. My local IP is 192.168.1.45 . Doing svn://192.168.1.45:3690 also works. My global IP is, say, x.x.x.x. Just doing svn://x.x.x.x:3690 doesn't work, which makes sense, since I have to set up port forwarding. I'm using a Verizon router. Using their web interface (on 192.168.1.1) I added the following port forwarding rule: IP Address forward to: 192.168.1.45 Source Ports: Any Dest Ports: 3690 Forward to: 3690 Protocol: TCP However, even after applying this rule, going to svn://x.x.x.x:3690 doesn't work. It takes a few seconds to fail, then says that the connection couldn't be established because the server connected to didn't respond properly after a period of time. What's interesting is that a random port, like svn://x.x.x.x:36904 fails immediately, saying that the target machine actively refused the connection. So I figure that the forwarding rule did something, but not fully what was necessary. Any ideas on how to get this working? The router model is MI424-WR and the firmware version is 4.0.16.1.56.0.10.12.3. UPDATE: I also tried setting destination port to 45000, and still forwarding to 3690, in case something was wrong w/ the lower-numbered ports, but to no avail. I also tried port 80 to port 3690, still all in vain.

    Read the article

  • VMWare steals IP addresses

    - by Ishan Amin
    I'm having a peculiar problem, that I think I have narrowed down to VMware. For the past one year, every once in a while we lose internet connection and not all users (about 10 users) go down at the same time, its usually one-by-one. First someone will call me and say "Internet is down" and then we would go reset the router and modem and switch and it would be working again for a while, then go down again without any pattern or replicatable sequence. We'd go repeat the steps again to get everyone in the office running again. We called our Internet Service Provider and they constantly say, We see your modem and we see your router and from thier end everything is OK. we replaced our router and switch and modem, twice! Last friday, it dawned upon me, that everytime we turn on a VMware machine, this sequence of taking everyone down starts, which also explains the message that my users get for "IP Conflict Found" So we do alot of VMware testing and lo and behold, it takes my Internet down. My Yahoo and Gtalk would continue working but www is down when the VMware machines are started. I do use bridged networking to all the VMware machines, but I dont know what else to set it at. now, sorry for this long rambling but anyone have any clue on how to stop this? thanks IA

    Read the article

  • MacBook Air Keeps dropping Wi-Fi

    - by Robert Patrick
    So my MacBook Air keeps dropping Wi-Fi for some reason. It happens ONLY on my home network, and ONLY to my computer. I'm using a Linksys WRT54G router. I'm the only Mac on the network. Every other Wi-Fi network is perfectly fine, and every other computer on this network is fine. Many things can happen. It could say it's connected, but not be able to access the internet (whether it tells me that there's no internet access or not). It may just drop Wi-Fi altogether, and refuse to connect. Generally, if I unplug the router and plug it back in, it's all good. It also works if I restart my computer. This happens multiple times a day. Yesterday I did everything I know to get it to connect (restart router many times, restart my MacBook), and nothing worked. Eventually it just magically worked. How can I stop this from happening? We got a notice from Comcast a while ago saying that a bot called DNS Changer was detected on one or more machines on the network. I'm assuming that this can't be me, right?

    Read the article

  • Why does my DD-WRT not accept SSH connections from my laptop?

    - by Vlad Seghete
    So, here is my system: I have a 2Wire AT&T modem/router which I use for wireless and a Buffalo router flashed with DD-WRT which is physically attached to the 2Wire and set in the DMZ. I set everything up on the DD-WRT to be able to connect to it using ssh and also so that it forwards ssh requests on a different port to one of the servers behind it. Now, when I am physically connected to the DD-WRT all this works great and as I would want it to. I ssh into the two different ports using the WAN IP of my network, and I get where I expect to land. If, however, I am connected using wi-fi to the 2Wire, the same commands do not work. I do not get an error, simply a timeout. I have trouble understanding this, since the DD-WRT is set in the DMZ and everything should pass to it. To further complicate the problem, I tried connecting to the same IP using my phone (wireless disabled, so really from the WAN) and surprise, it works! If I go back on the local network by enabling the wifi, the ssh connection times out. To make this even stranger, my WAN IP address always responds to pings (meaning in all the above situations). What could be going on here? I know what I should do, completely disable the 2wire as a router and use it strictly as a modem and them use all the routing capabilities of the dd-wrt. It's what I will probably end up doing anyway, but my question remains, because I really want to know what is happening here.

    Read the article

  • Configuring two nearby WLANs: should I use the same ssid?

    - by Rory
    I'm configuring a home network for basic internet use (ie don't really need connectivity between workstations on the network). My brick walls mean a single wireless router doesn't provide good coverage throughout the house, so I have purchased two powerline adapters and now have the incoming modem/wireless router at one end of the house plugged into a powerline adapter, and at the other end of the house the other powerline adapter plugged into another wireless router. Currently the two wireless networks have different ssids. (The powerline adapters only do power-Ethernet; they're not wireless access points themselves.) This works well, except when I move between rooms and would ideally like my devices (iPad, phones, laptops) to switch from the weak to the strong signal. Sometimes there's enough signal that they hold on to the weak connects instead of switching to the strong one. Should I name the two networks the same ssid, and if so what is the actual effect? Do the signals get confused, is the bandwidth affected, will this help my devices seamlessly move from one to the other, or is the ssid just a cosmetic thing that actually doesn't have any impact on this situation? Are there any other settings that I should configure to make my setup optimal?

    Read the article

< Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >