Search Results

Search found 1666 results on 67 pages for 'lurker indeed'.

Page 49/67 | < Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >

  • Zend: Fetching row from session db table after generating session id

    - by Nux
    Hi, I'm trying to update the session table used by Zend_Session_SaveHandler_DbTable directly after authenticating the user and writing the session to the DB. But I can neither update nor fetch the newly inserted row, even though the session id I use to check (Zend_Session::getId()) is valid and the row is indeed inserted into the table. Upon fetching all session ids (on the same request) the one I newly inserted is missing from the results. It does appear in the results if I fetch it with something else. I've checked whether it is a problem with transactions and that does not seem to be the problem - there is no active transaction when I'm fetching the results. I've also tried fetching a few seconds after writing using sleep(), which doesn't help. $auth->getStorage()->write($ident); //sleep(1) $update = $this->db->update('session', array('uid' => $ident->user_id), 'id='.$this->db->quote(Zend_Session::getId())); $qload = 'SELECT id FROM session'; $load = $this->db->fetchAll($qload); echo $qload; print_r($load); $update fails. $load doesn't contain the row that was written with $auth-getStorage()-write($identity). $qload does contain the correct query - copying it to somewhere else leads to the expected result, that is the inserted row is included in the results. Database used is MySQL - InnoDB. If someone knows how to directly fix this (i.e. on the same request, not doing something like updating after redirecting to another page) without modifying Zend_Session_SaveHandler_DbTable: Thank you very much!

    Read the article

  • Child sProc cannot reference a Local temp table created in parent sProc

    - by John Galt
    On our production SQL2000 instance, we have a database with hundreds of stored procedures, many of which use a technique of creating a #TEMP table "early" on in the code and then various inner stored procedures get EXECUTEd by this parent sProc. In SQL2000, the inner or "child" sProc have no problem INSERTing into #TEMP or SELECTing data from #TEMP. In short, I assume they can all refer to this #TEMP because they use the same connection. In testing with SQL2008, I find 2 manifestations of different behavior. First, at design time, the new "intellisense" feature is complaining in Management Studio EDIT of the child sProc that #TEMP is an "invalid object name". But worse is that at execution time, the invoked parent sProc fails inside the nested child sProc. Someone suggested that the solution is to change to ##TEMP which is apparently a global temporary table which can be referenced from different connections. That seems too drastic a proposal both from the amount of work to chase down all the problem spots as well as possible/probable nasty effects when these sProcs are invoked from web applications (i.e. multiuser issues). Is this indeed a change in behavior in SQL2005 or SQL2008 regarding #TEMP (local temp tables)? We skipped 2005 but I'd like to learn more precisely why this is occuring before I go off and try to hack out the needed fixes. Thanks.

    Read the article

  • JavaScript problems in one IIS server but not another

    - by DanyW
    Hi everyone, I have a problem that only occurs in one environment. On this particular page, somewhere in the top half of the element, an array is created and populated. This is later used in the onfocus event handlers of various controls. I use Firebug to debug the page and discovered the problem. In our dev environment the array is indeed created and populated. In our staging environment this block of script is not executed! I put a break point where the array is instantiated and it's never hit in staging, but is hit in dev. I'm really puzzled what aspects of the two environments can possibly affect this? We use aptimize on the staging box but it has been turned off for this particular website. I compared the page sources and they're identical! The only difference is bits of content since they are served by a CMS. Any ideas please? I'm quite stuck on this. Cheers, Dany.

    Read the article

  • Installing sfJqueryTreeDoctrineManagerPlugin to Symfony 1.4

    - by Christine Q.
    I have faced serious difficulties while installing sfJqueryTreeDoctrineManagerPlugin to Symfony 1.4 w/ Doctrine ORM. The installation directly from the server did not work out like with previous plugins that I have installed: C:\pathsymfony plugin:install sfJqueryTreeDoctrineManagerPlugin plugin installing plugin "sfJqueryTreeDoctrineManagerPlugin" No release available for plugin "sfJqueryTreeDoctrineManagerPlugin" This is why I needed to install the plugin by downloading the tgz-archive and install it manually like this: C:\pathsymfony plugin:install "C:\path\to\downloads\sfJqueryTreeDoctrineManagerPlugin-1.2.4.tgz" plugin installing plugin "C:\path\to\downloads\sfJqueryTreeDoctrineManagerPlugin-1.2.4.tgz" sfSymfonyPluginManager Installing web data for plugin I guess everything should be fine this far? After that I edited \apps\admin\config\settings.yml like instructed in the plugins readme file. all: .settings: enabled_modules: [default, sfJqueryTreeDoctrineManager] I also checked that the plugin was enabled in \config\ProjectConfiguration.class.php like this: $this->enablePlugins(array( // other plugins, 'sfJqueryTreeDoctrineManagerPlugin' )); I published assets and cleared cache: C:\pathsymfony plugin:publish-assets >> plugin Configuring plugin - sfJqueryTreeDoctrineManagerPlugin C:\pathsymfony cc Finally I added the required helper to the newly created apps\admin\modules\category\templates\indexSuccess.php <?php use_helper("sfJqueryTreeDoctrine"); echo get_nested_set_manager("Category", "name"); When loading the page I unfortunately get the following error: 500 | Internal Server Error | InvalidArgumentException Unable to load "sfJqueryTreeDoctrineHelper.php" helper in: SF_ROOT_DIR\apps\admin\modules/businessunitgroup/lib/helper, SF_ROOT_DIR\apps\admin\lib/helper, SF_ROOT_DIR\lib/helper, SF_SYMFONY_LIB_DIR/helper. The file sfJqueryTreeDoctrineHelper.php exists indeed but not in any previously mentioned folder. The file can only be found in the folder \plugins\sfJqueryTreeDoctrineManagerPlugin\lib\helper. I guess that Symfony doesn't look to that folder while finding helpers? I have tried to move the helper file to one of the previously mentioned folders. As expected, that changes the error. Now I get: 500 | Internal Server Error | sfConfigurationException The component does not exist: "sfJqueryTreeDoctrineManager", "manager". Unfortunately I can't figure out how should I be able to retrieve the "missing" component from the correct folder. I would be very grateful for any advice to help me forward. By the way, I am aware that there are other nested-set / tree plugins available for Symfony (like sfDoctrineTreePlugin and caPropelTreePlugin) but unluckily those are either uncompatible or too limited for my needs.

    Read the article

  • Adjust size of MPMediaPickerController's view ?

    - by Mr.Gando
    In my application I don't use the upper bar that displays Wi-Fi/Date/Time because it's a game. However I need to be able to let my user to pick his music, so I'm using a MPMediaPickerController. The problem is, that when I present my controller, the controller ends up leaving a 10 pixels ( aprox ) bar at the top of the screen, just in the place the Wi-Fi/Date/Time bar, should be present. Is there a way I could make my MPMediaPickerController bigger ? or to be presented upper in the screen ? // Configures and displays the media item picker. - (void) showMediaPicker: (id) sender { MPMediaPickerController *picker = [[MPMediaPickerController alloc] initWithMediaTypes: MPMediaTypeAnyAudio]; [[picker view] setFrame:CGRectMake(0, 0, 320, 480)]; picker.delegate = self; picker.allowsPickingMultipleItems = YES; picker.prompt = NSLocalizedString (@"AddSongsPrompt", @"Prompt to user to choose some songs to play"); [self presentModalViewController:picker animated: YES]; [picker release]; } There I tried to set the size to 320x480 but no luck, the picker is still presented and leaves a space in the upper part of the screen, could anyone help me ? Btw, here's how it looks: I have asked a bit, and people told me this could indeed be a bug, what do you guys think ?

    Read the article

  • Grails UrlMappings with .html

    - by Glennn
    I'm developing a Grails web application (mainly as a learning exercise). I have previously written some standard Grails apps, but in this case I wanted to try creating a controller that would intercept all requests (including static html) of the form: <a href="/testApp/testJsp.jsp">test 1</a> <a href="/testApp/testGsp.gsp">test 2</a> <a href="/testApp/testHtm.htm">test 3</a> <a href="/testApp/testHtml.html">test 4</a> The intent is to do some simple business logic (auditing) each time a user clicks a link. I know I could do this using a Filter (or a range of other methods), however I thought this should work too and wanted to do this using a Grails framework. I set up the Grail UrlMappings.groovy file to map all URLs of that form (/$myPathParam?) to a single controller: class UrlMappings { static mappings = { "/$controller/$action?/$id?"{ constraints { } } "/$path?" (controller: 'auditRecord', action: 'showPage') "500"(view:'/error') } } In that controller (in the appropriate "showPage" action) I've been printing out the path information, for example: def showPage = { println "params.path = " + params.path ... render(view: resultingView) } The results of the println in the showPage action for each of my four links are testJsp.jsp testGsp.gsp testHtm.htm testHtml Why is the last one "testHtml", not "testHtml.html"? In a previous (Stack Overflow query) Olexandr encountered this issue and was advised to simply concatenate the value of request.format - which, indeed, does return "html". However request.format also returns "html" for all four links. I'm interested in gaining an understanding of what Grails is doing and why. Is there some way to configure Grails so the params.path variable in the controller shows "testHtml.html" rather than stripping off the "html" extension? It doesn't seem to remove the extension for any other file type (including .htm). Is there a good reason it's doing this? I know that it is a bit unusual to use a controller for static html, but still would like to understand what's going on.

    Read the article

  • What is the correct way to handle object which is instance of class in apache.xerces?

    - by Roman
    Preface: I'm working on docx parser for java. docx format is based on xml. When I read document its parts are being unmarshalled (with JAXB). And I get a tree of certain elements based on xml markup. Almost problem: But some elements (which are at very deep xml level) returned not as certain class from docx spec (i.e. CTStyle, CTDrawing, CTInline etc) but as Object. Those objects are indeed instances of xerces classes, e.g. ElementNSImpl. Problem: How should I handle these objects. The simplest approach is: CTGraphicData gData = getGraphicData (); Object obj = gData.getAny().get(0); ElementNSImpl element = (ElementNSImpl)obj; But it doesn't seem to be a good solution. I've never worked with xerces directly. What is the better way to do this casting? (If anyone also give me a tip about right way to iterate through nodes it would be great).

    Read the article

  • Is this an example of LINQ-to-SQL?

    - by Edward Tanguay
    I made a little WPF application with a SQL CE database. I built the following code with LINQ to get data out of the database, which was surprisingly easy. So I thought "this must be LINQ-to-SQL". Then I did "add item" and added a "LINQ-to-SQL classes" .dbml file, dragged my table onto the Object Relational Designer but it said, "The selected object uses an unsupported data provider." So then I questioned whether or not the following code actually is LINQ-to-SQL, since it indeed allows me to access data from my SQL CE database file, yet officially "LINQ-to-SQL" seems to be unsupported for SQL CE. So is the following "LINQ-to-SQL" or not? using System.Linq; using System.Data.Linq; using System.Data.Linq.Mapping; using System.Windows; namespace TestLinq22 { public partial class Window1 : Window { public Window1() { InitializeComponent(); MainDB db = new MainDB(@"Data Source=App_Data\Main.sdf"); var customers = from c in db.Customers select new {c.FirstName, c.LastName}; TheListBox.ItemsSource = customers; } } [Database(Name = "MainDB")] public class MainDB : DataContext { public MainDB(string connection) : base(connection) { } public Table<Customers> Customers; } [Table(Name = "Customers")] public class Customers { [Column(DbType = "varchar(100)")] public string FirstName; [Column(DbType = "varchar(100)")] public string LastName; } }

    Read the article

  • Precision of cos(atan2(y,x)) versus using complex <double>, C++

    - by Ivan
    Hi all, I'm writing some coordinate transformations (more specifically the Joukoswky Transform, Wikipedia Joukowsky Transform), and I'm interested in performance, but of course precision. I'm trying to do the coordinate transformations in two ways: 1) Calculating the real and complex parts in separate, using double precision, as below: double r2 = chi.x*chi.x + chi.y*chi.y; //double sq = pow(r2,-0.5*n) + pow(r2,0.5*n); //slow!!! double sq = sqrt(r2); //way faster! double co = cos(atan2(chi.y,chi.x)); double si = sin(atan2(chi.y,chi.x)); Z.x = 0.5*(co*sq + co/sq); Z.y = 0.5*si*sq; where chi and Z are simple structures with double x and y as members. 2) Using complex : Z = 0.5 * (chi + (1.0 / chi)); Where Z and chi are complex . There interesting part is that indeed the case 1) is faster (about 20%), but the precision is bad, giving error in the third decimal number after the comma after the inverse transform, while the complex gives back the exact number. So, the problem is on the cos(atan2), sin(atan2)? But if it is, how the complex handles that? Thanks!

    Read the article

  • Perl cgi @INC different in shell and in http request

    - by pistacchio
    Hi to all, I have the follwing, simplest per cgi script: use strict; use warnings; use CGI(); use CGI::Carp qw(fatalsToBrowser); use Template; print CGI::header(); foreach(@INC) { print "$_\n"; } When called (http://[..]/cgi-bin/p.cgi) I am given the following error: Can't locate Template.pm in @INC (@INC contains: /usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi /usr/lib/perl5/5.8.8 .) at /home/pistacchio/webapps/htdocs/cgi-bin/p.cgi line 8. BEGIN failed--compilation aborted at /home/pistacchio/webapps/htdocs/cgi-bin/p.cgi line 8. I made sure that Template is installed and indeed when running this program from shell it works (loads Template) and outputs: Content-Type: text/html; charset=ISO-8859-1 /home/pistacchio/lib/perl5 /home/pistacchio/lib/perl5/lib/i386-linux-thread-multi /home/pistacchio/lib/perl5/lib /home/pistacchio/lib/perl5/lib/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi /usr/lib/perl5/5.8.8 Template is installed in /home/pistacchio/lib/perl5/lib/i386-linux-thread-multi [pistacchio@web118 i386-linux-thread-multi]$ pwd /home/pistacchio/lib/perl5/lib/i386-linux-thread-multi [pistacchio@web118 i386-linux-thread-multi]$ ls auto perllocal.pod Template Template.pm This directory is correctly listed in env and, as previously posted, in @INC. In @INC it is shown twice, so I even tried to pop it out before calling use Template, but without result. From env: [pistacchio@web118 i386-linux-thread-multi]$ env [..] PERL5LIB=/home/pistacchio/lib/perl5:/home/pistacchio/lib/perl5/lib:/home/pistacchio/lib/perl5/lib/i386-linux-thread-multi [..] Removing use Template gets rid of the problem. Can anybody help?

    Read the article

  • How can I get the mapi system stub dll to pass extended mapi calls to my dll?

    - by Bogatyr
    For various reasons (questioning the reasons is not helpful to me), I'd like to implement my own extended mapi dll for windows xp. I have a skeleton dll now, just a few entrypoints exist for testing, but the system mapi stub (c:\windows\system32\mapi32.dll, I've checked that it's identical to mapistub.dll) will not pass through calls to my dll, while it happily passes the same calls through to MS Outlook's msmapi32.dll, (MAPIInitialize, MAPILoginEx are two such calls). There's some secret handshake between the stub and the extended mapi dll wherein the stub checks that "yup, it's an extended mapi dll": maybe it's the presence of some additional entrypoints I haven't implemented yet, maybe it's the return value from some function, I don't know. I've tried tracing a sample app I wrote that calls MAPIInitialize with STraceNT and ProcessMonitor but that didn't show anything obvious. Tracing has shown that indeed the stub loads my dll, but then finds the secret sauce is missing apparently, and returns an error code instead of calling my dll's function. What more could be needed for calling MAPIInitialize than the presence of MAPIInitialize in my dll's exports table? GetProcAddress says it's there. What I'd like to know is how to minimally extend my skeleton extended mapi dll so that the stub mapi dll will pass through extended mapi calls to my dll. What's the secret sauce? I'd rather not spend a painful week in msvc reverse engineering the stub behavior.

    Read the article

  • TypeScript - separating code output

    - by Andrea Baccega
    i'm trying typescript and I find it very useful. I've a quite large project and i was considering rewriting it using typescript. The main problem here is the following: file A.ts: class A extends B { // A stuff } file B.ts: class B { // B stuff } If I compile A.ts with this command: tsc --out compiledA.js A.ts I'll get error from the compiler cause he doesn't know how to threat the "B" after extends. So, a "solution" would be including in A.ts (as first line of code): /// <reference path="./B.ts" /> Compiling again A.ts with the same command tsc --out compiledA.js A.ts Will result in compiledA.js containing both B.ts and A.ts code. ( which could be very nice ) In my case, I only need to compile the A.ts code in the compiledA.js file and I don't want the B.ts stuff to be in there. Indeed, what I want is: tsc --out A.js A.ts = compile only the A.ts stuff tsc --out B.js B.ts = compile only the B.ts stuff I can do it by removing the "extends" keyword but doing that I'll loose most of the typescript goodness. Can someone telll me if there's a way to do this ?

    Read the article

  • How to restrain one's self from the overwhelming urge to rewrite everything?

    - by Scott Saad
    Setup Have you ever had the experience of going into a piece of code to make a seemingly simple change and then realizing that you've just stepped into a wasteland that deserves some serious attention? This usually gets followed up with an official FREAK OUT moment, where the overwhelming feeling of rewriting everything in sight starts to creep up. It's important to note that this bad code does not necessarily come from others as it may indeed be something we've written or contributed to in the past. Problem It's obvious that there is some serious code rot, horrible architecture, etc. that needs to be dealt with. The real problem, as it relates to this question, is that it's not the right time to rewrite the code. There could be many reasons for this: Currently in the middle of a release cycle, therefore any changes should be minimal. It's 2:00 AM in the morning, and the brain is starting to shut down. It could have seemingly adverse affects on the schedule. The rabbit hole could go much deeper than our eyes are able to see at this time. etc... Question So how should we balance the duty of continuously improving the code, while also being a responsible developer? How do we refrain from contributing to the broken window theory, while also being aware of actions and the potential recklessness they may cause? Update Great answers! For the most part, there seems to be two schools of thought: Don't resist the urge as it's a good one to have. Don't give in to the temptation as it will burn you to the ground. It would be interesting to know if more people feel any balance exists.

    Read the article

  • uninitialized constant Test::Unit::TestResult::TestResultFailureSupport

    - by Vitaly Kushner
    I get the error in subj when I'm trying to run specs or generators in a fresh rails project. This happens when I add shoulda to the mix. I added the following in the config/environment.rb: config.gem 'rspec', :version => '1.2.6', :lib => false config.gem 'rspec-rails', :version => '1.2.6', :lib => false config.gem "thoughtbot-shoulda", :version => "2.10.2", :lib => 'shoulda', :source => "http://gems.github.com" I'm on OSX. ruby 1.8.6 (2008-08-11 patchlevel 287) gems 1.3.5 rails 2.3.4 rspec - 1.2.6 shoulda - 2.10.2 test-unit - 2.0.3 I'm aware of this and adding config.gem 'test-unit', :lib => 'test/unit' indeed solves the genrator problem as it doesn't throw an exception, but it prints 0 tests, 0 assertions, 0 failures, 0 errors, 0 pendings, 0 omissions, 0 notifications at the end of the run so I suppose it tries to run tests which is unexpected and undesired, also the specs stop to run at all, seems like rspec is not running at all, when running rake spec I get the test-unit output again (with 0 tests as there are only specs, no tests defined)

    Read the article

  • Gzip and subprocess' stdout in python

    - by pythonic metaphor
    I'm using python 2.6.4 and discovered that I can't use gzip with subprocess the way I might hope. This illustrates the problem: May 17 18:05:36> python Python 2.6.4 (r264:75706, Mar 10 2010, 14:41:19) [GCC 4.1.2 20071124 (Red Hat 4.1.2-42)] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> import gzip >>> import subprocess >>> fh = gzip.open("tmp","wb") >>> subprocess.Popen("echo HI", shell=True, stdout=fh).wait() 0 >>> fh.close() >>> [2]+ Stopped python May 17 18:17:49> file tmp tmp: data May 17 18:17:53> less tmp "tmp" may be a binary file. See it anyway? May 17 18:17:58> zcat tmp zcat: tmp: not in gzip format Here's what it looks like inside less HI ^_<8B>^H^Hh<C0><F1>K^B<FF>tmp^@^C^@^@^@^@^@^@^@^@^@ which looks like it put in the stdout as text and then put in an empty gzip file. Indeed, if I remove the "Hi\n", then I get this: May 17 18:22:34> file tmp tmp: gzip compressed data, was "tmp", last modified: Mon May 17 18:17:12 2010, max compression What is going on here?

    Read the article

  • Table cell in a split-view controller - selected cell becomes deselected when called by reloadData

    - by bpapa
    I'm working on a universal app that uses a SplitViewController to present a master-detail view. In the iPad HIG on Split Views, Apple states: In general, indicate the current selection in the left pane in a persistent way. This behavior helps people understand the relationship between the item in the left pane and the contents of the right pane. This is important because the contents of the right pane can change, but they should always remain related to the item selected in the left pane. So I'm trying to maintain selection state on the left. Easy enough when the user taps, I just remove the deselectRowAtIndexPath:animated: message from tableView:didSelectRowAtIndexPath: implementation. But, I also want the selection state to show up by default (without a user tap). I wound up putting this in my tableView:cellForRowAtIndexPath: implementation: if (UI_USER_INTERFACE_IDIOM() == UIUserInterfaceIdiomPad) { if (cellShouldBeSelected) cell.selected = YES; else cell.selected = NO; } The behavior I'm seeing, is that when the cells finall appear, for a fraction of a section the cell is indeed selected, but then the selection disappears without any user interaction. Any ideas? I set the new clearsSelectionOnViewWillAppear property to NO, but that doesn't seem to fix it, and it shouldn't really matter because I'm marking the cell as selected long after viewWillAppear is called - I'm actually doing it after some network activity and then sending the table view a reloadData message.

    Read the article

  • GWT : Internet Explorer transparency issue

    - by dindeman
    This post concerns only IE. The last line of the following code is causing the issue. int width = 200; int height = 200; int overHeight = 40; AbsolutePanel absPanel = new AbsolutePanel(); absPanel.setSize(width + "px", height + "px"); SimplePanel underPanel = new SimplePanel(); underPanel.setWidth(width + "px"); underPanel.setHeight(height + "px"); underPanel.getElement().getStyle().setBackgroundColor("red"); SimplePanel overPanel = new SimplePanel(); overPanel.setWidth(width + "px"); overPanel.setHeight(overHeight + "px"); overPanel.getElement().getStyle().setBackgroundColor("black"); //Setting the IE opacity to 20% on the black element in order to obtain the see through effect. overPanel.getElement().getStyle().setProperty("filter", "alpha(opacity=20)"); absPanel.add(underPanel, 0, 0); absPanel.add(overPanel, 0, 0); RootPanel.get("test").add(absPanel); //The next line causes the problem. absPanel.getElement().getStyle().setProperty("filter", "alpha(opacity=100)"); So basically this code should display a red square of 200px by 200px (see underPanel in the code) and on top of it a black rectangle of 200px by 40px (see overPanel in the code). However the black rectangle is partially see through since its transparency is set to 20%, therefore it should appear in red, but of a darker red than the rectangle sitting under since it is actually a faded black item. Some rendering problem occurs because of the last line of code that sets the opacity of the containing AbsolutePanel to 100% (which in theory should not affect the visual result). Indeed in that case the panel lying over remains still see through but straight through the background colour of the page! It's like if the panel sitting under was not there at all... Any ideas? This is under GWT 2.0 and IE7.

    Read the article

  • How to genrate a monochrome bit mask for a 32bit bitmap

    - by Mordachai
    Under Win32, it is a common technique to generate a monochrome bitmask from a bitmap for transparency use by doing the following: SetBkColor(hdcSource, clrTransparency); VERIFY(BitBlt(hdcMask, 0, 0, bm.bmWidth, bm.bmHeight, hdcSource, 0, 0, SRCCOPY)); This assumes that hdcSource is a memory DC holding the source image, and hdcMask is a memory DC holding a monochrome bitmap of the same size (so both are 32x32, but the source is 4 bit color, while the target is 1bit monochrome). However, this seems to fail for me when the source is 32 bit color + alpha. Instead of getting a monochrome bitmap in hdcMask, I get a mask that is all black. No bits get set to white (1). Whereas this works for the 4bit color source. My search-foo is failing, as I cannot seem to find any references to this particular problem. I have isolated that this is indeed the issue in my code: i.e. if I use a source bitmap that is 16 color (4bit), it works; if I use a 32 bit image, it produces the all-black mask. Is there an alternate method I should be using in the case of 32 bit color images? Is there an issue with the alpha channel that overrides the normal behavior of the above technique? Thanks for any help you may have to offer! ADDENDUM: I am still unable to find a technique that creates a valid monochrome bitmap for my GDI+ produced source bitmap. I have somewhat alleviated my particular issue by simply not generating a monochrome bitmask at all, and instead I'm using TransparentBlt(), which seems to get it right (but I don't know what they're doing internally that's any different that allows them to correctly mask the image). It might be useful to have a really good, working function: HBITMAP CreateTransparencyMask(HDC hdc, HBITMAP hSource, COLORREF crTransparency); Where it always creates a valid transparency mask, regardless of the color depth of hSource. Ideas?

    Read the article

  • Can't block capslock with CGEventTap

    - by Thor Frølich
    I'm using Quartz CGEventTap in an attempt to globally intercept capslock presses and block them (to have them do something useful instead). I succesfully detect capslock presses but have so far been unable to block them. My code (originating from this stackoverflow answer) is something like this: eventTap = CGEventTapCreate(kCGHIDEventTap, kCGTailAppendEventTap, kCGEventTapOptionDefault, eventMask, myCGEventCallback, &oldFlags); runLoopSource = CFMachPortCreateRunLoopSource(kCFAllocatorDefault, eventTap, 0); CFRunLoopAddSource(CFRunLoopGetCurrent(), runLoopSource, kCFRunLoopCommonModes); CGEventTapEnable(eventTap, true); CGEventRef myCGEventCallback(CGEventTapProxy proxy, CGEventType type, CGEventRef theEvent, void *refcon) { CGEventFlags *oldFlags = (CGEventFlags *)refcon; switch (type) { case kCGEventFlagsChanged: { CGEventFlags newFlags = CGEventGetFlags(theEvent); CGEventFlags changedFlags = *oldFlags ^ newFlags; *oldFlags = newFlags; if (changedFlags == 65536) { NSLog(@"Capslock pressed. Let's not return the event"); return NULL; } break; } default: break; } NSLog(@"Different modifier than capslock. Returning the event"); return theEvent; } If I understand correctly returning NULL should effectively block the keypress from propagating. Indeed it also does for "normal" keyup and -down events. However capslock toggles regardless. Any ideas why that is? Am I making incorrect assumptions? And/or how can I do things differently to achieve my goal? Thanks, Thor

    Read the article

  • Strategy Pattern with Type Reflection affecting Performances ?

    - by Aurélien Ribon
    Hello ! I am building graphs. A graph consists of nodes linked each other with links (indeed my dear). In order to assign a given behavior to each node, I implemented the strategy pattern. class Node { public BaseNodeBehavior Behavior {get; set;} } As a result, in many parts of the application, I am extensively using type reflection to know which behavior a node is. if (node.Behavior is NodeDataOutputBehavior) workOnOutputNode(node) .... My graph can get thousands of nodes. Is type reflection greatly affecting performances ? Should I use something else than the strategy pattern ? I'm using strategy because I need behavior inheritance. For example, basically, a behavior can be Data or Operator, a Data behavior can IO, Const or Intermediate and finally an IO behavior can be Input or Output. So if I use an enumeration, I wont be able to test for a node behavior to be of data kind, I will need to test it to be [Input, Output, Const or Intermediate]. And if later I want to add another behavior of Data kind, I'm screwed, every data-testing method will need to be changed.

    Read the article

  • How can I generate the Rowland prime sequence idiomatically in J?

    - by Gregory Higley
    If you're not familiar with the Rowland prime sequence, you can find out about it here. I've created an ugly, procedural monadic verb in J to generate the first n terms in this sequence, as follows: rowland =: monad define result =. 0 $ 0 t =. 1 $ 7 while. (# result) < y do. a =. {: t n =. 1 + # t t =. t , a + n +. a d =. | -/ _2 {. t if. d > 1 do. result =. ~. result , d end. end. result ) This works perfectly, and it indeed generates the first n terms in the sequence. (By n terms, I mean the first n distinct primes.) Here is the output of rowland 20: 5 3 11 23 47 101 7 13 233 467 941 1889 3779 7559 15131 53 30323 60647 121403 242807 My question is, how can I write this in more idiomatic J? I don't have a clue, although I did write the following function to find the differences between each successive number in a list of numbers, which is one of the required steps. Here it is, although it too could probably be refactored by a more experienced J programmer than I: diffs =: monad : '}: (|@({.-2&{.) , $:@}.) ^: (1 < #) y'

    Read the article

  • How to implement custom JSF component for drawing chart?

    - by Roman
    I want to create a component which can be used like: <mc:chart data="#{bean.data}" width="200" height="300" /> where #{bean.data} returns a collection of some objects or chart model object or something else what can be represented as a chart (to put it simple, let's assume it returns a collection of integers). I want this component to generate html like this: <img src="someimg123.png" width="200" height="300"/> The problem is that I have some method which can receive data and return image, like: public RenderedImage getChartImage (Collection<Integer> data) { ... } and I also have a component for drawing dynamic image: <o:dynamicImage width="200" height="300" data="#{bean.readyChartImage}/> This component generates html just as I need but it's parameter is array of bytes or RenderedImage i.e. it needs method in bean like this: public RenderedImage getReadyChartImage () { ... } So, one approach is to use propertyChangedListener on submit to set data (Collection<Integer>) for drawing chart and then use <o:dynamicImage /> component. But I'd like to create my own component which receives data and draws chart. I'm using facelets but it's not so important indeed. Any ideas how to create the desired component? P.S. One solution I was thinking about is not to use <o:dynamicImage/> and use some servlet to stream image. But I don't know how to implement that correctly and how to tie jsf component with servlet and how to save already built chart images (generating new same image for each request can cause performance problems imho) and so on..

    Read the article

  • Windows Mobile : How to bind dropdown's selectedvalue to a column in table A and the list data to a

    - by Rob
    Hi, I am trying to learn the basics of Windows Mobile development against SQL CE and have come across a basic problem. I have two tables. One called Customers that stores customer info and has an identity column called ID as the primary key. The other table is called Orders which has a column called CustomerID (the FK constraint is present). I have added a DataSet to the project that contains both tables and have autogenerated the edit/view forms. This has produced a text control for the CustomerID column in the Order table for the new/edit form and I deleted it and replaced it with a dropdown list. Then, using the 'Advanced' databinding options (in Properties) I set the datasource of the list to the Customers table setting the value to the ID field and the text to the CustomerName field. I then set the SelectedValue of the list box to the CustomerID field of the Orders dataset. So far so good. When I run the app in the emulator and view the 'New' form for Orders the Customer dropdown is indeed populated with a list of customer names and I can select one and happily create a new order successfully. This is confirmed when I see the order appear in the Orders Grid form. However, when I then click on the order in the grid and then select 'Edit' the order loads but the dropdown always shows the first customer in the list and doesn't seem to bind the SelectedValue to the Orders dataset CustomerID field. Now I am an ASP.NET guy and normally hand craft the DAL and it's binding to the UI so I'm not entirely sure where to look to investigate what is going wrong here as this is all generated code. I am sure it is something very trivial but any pointers would be appreciated. My gut feeling is that the SelectedValue and the Customers.CustomerID values do not match for some reason? Many thanks, Rob.

    Read the article

  • Implementing Drag and Drop using MouseListener for custom Components

    - by Chris Lieb
    I am working on a school assignment that requires me to be able to pick up a tile, drag it to a location, then drop it there. I was able to get this working using TransferHandler and a bunch of stuff from the dnd package, but this is not an acceptable way to perform this action for this assignment according to the professor. So, I am trying to achieve the same effect using the MouseListener interface. The basic setup is this: I have a JPanel-derived class called LocationView that contains JLabel-dervived instances of TileView. I need to get events that give me the LocationView that has the mouse pressed on and the LocationView that has the mouse released on. I am proxying mouse events through the TileView to its containing LocationView so that I can properly handle the mousePressed event. I added System.out.println()'s to the mouse listeners for mousePressed and mouseReleased to both LocationView and TileView so that I could observe the events that were being generated. To my surprise, pressing the mouse on Tile A in Location A, then dragging to Location B and releasing would generate a mouse released event for both Tile A and Location A, but not for Location B. I need the mouse released event triggered for only Location B. To try to work around this, I tried implementing a glass pane based off of the FinalGlassPane found at http://weblogs.java.net/blog/2006/09/20/well-behaved-glasspane. After adding the glass pane and adding an event listener for it, I can see that the mouse events are indeed filtering through the glass pane, but the mouse released event is still only being called on the item the mouse was clicked on. Is there a way to have mousePressed and mouseReleased events associated with the same drag action be called on separate components?

    Read the article

  • Listing serial (COM) ports on Windows?

    - by Eli Bendersky
    Hello, I'm looking for a robust way to list the available serial (COM) ports on a Windows machine. There's this post about using WMI, but I would like something less .NET specific - I want to get the list of ports in a Python or a C++ program, without .NET. I currently know of two other approaches: Reading the information in the HARDWARE\\DEVICEMAP\\SERIALCOMM registry key. This looks like a great option, but is it robust? I can't find a guarantee online or in MSDN that this registry cell indeed always holds the full list of available ports. Tryint to call CreateFile on COMN with N a number from 1 to something. This isn't good enough, because some COM ports aren't named COMN. For example, some virtual COM ports created are named CSNA0, CSNB0, and so on, so I wouldn't rely on this method. Any other methods/ideas/experience to share? Edit: by the way, here's a simple Python implementation of reading the port names from registry: import _winreg as winreg import itertools def enumerate_serial_ports(): """ Uses the Win32 registry to return a iterator of serial (COM) ports existing on this computer. """ path = 'HARDWARE\\DEVICEMAP\\SERIALCOMM' try: key = winreg.OpenKey(winreg.HKEY_LOCAL_MACHINE, path) except WindowsError: raise IterationError for i in itertools.count(): try: val = winreg.EnumValue(key, i) yield (str(val[1]), str(val[0])) except EnvironmentError: break

    Read the article

< Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >