Search Results

Search found 1605 results on 65 pages for 'monitors'.

Page 49/65 | < Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >

• Program (or perhaps built-in feature of Windows 7) to change wallpaper depending on screen resolution?

  - by Lasse V. Karlsen

  I have a laptop with a resolution of 1680x1050. At work I use 2x 1280x1024 monitors, and sometimes I present using a projector that is 1024x768. My wallpaper, that I made for 1680x1050, looks awful on the other resolutions. Is there anything I can do that would make Windows 7 switch to a different wallpaper that has been cropped appropriately? ie. can I give Windows more than one wallpaper, with different resolutions, and have Windows 7 switch automatically to a matching one? If there is a free (or relatively cheap) piece of software I could download and install that would fix it, that would be OK too.

  Read the article

• Windows 7/Outlook 2010 cut off controls on form windows

  - by D..

  I am running windows 7 with multiple monitors. 2 at 1920 x 1200 and 1 at 1600x900 resolution. Controls are cut off and I cannot view the entire content of the window. As far as I can tell I only have the issue with Outlook 2010, it may be present in other applications but I haven't noticed it. For example to get to the more settings button I have to use tab and then click enter. The more settings button is never visible. I have used applications that allow you to force windows to be resizable, however the anchoring is such that it remains cut off. This has been present over multiple clean installs on the system. My DPI is set to 100% unlike this issue.

  Read the article

• BIG IP - HTTPS Health Monitor setup

  - by djo

  I have a Web site that we have setup a health monitoring pages so we can take our servers in and out of the Big-IP as we see fit. Now we have just moved onto Big-IP and the issue I have hit is that you setup Health Monitors for port 80 and 443, now the 80 check works fine but when I to get the 443 check to look at our file it fails. Now I am aware as I am hitting the this page on the IP address over HTTPS is going to cause a cert error but I would have guessed that BIG-Ip would have been setup just to accept the cert and carry on with the check. Is what I am wanting to do possible? Also is there a way of just using a HTTP monitor for HTTPS? Because if port 80 has stopped sending traffic then if i use the same monitor for 443 it will stop traffic to that. Any help would be great! Thanks

  Read the article

• How do I run a batch file async using PSExec?

  - by Paul Mrozowski

  I have a batch file I run that, among other things, reset's the NICs in the machine. I have some watchdog software running on another machine that monitors the first one. I'd like to run this batch file using PSExec when it detects certain types of failures. The problem I'm having is that since the batch file reset's the NIC's it kills the connection PSExec has (I'm OK with that). The real issue is that when PSExec dies the batch file stops running (leaving the NIC's disabled). I've tried using the -i option with PSExec with no luck. Any ideas about basically just fire off the batch file and NOT have it stop when PSExec is disconnected?

  Read the article

• Apache Tomcat 6.0.29 startup causing Win XP SP3 reboot

  - by Liam

  Some of our Windows XP Developer machines die (black screen - no ping) when starting up Tomcat from a console. This only happens if the Tomcat debug console window is displayed (not minimised). When minimised, the startup / run is successful. I've checked for Tomcat logs and the crash sessions produce empty (zero bytes) tomcat log files. No system logs exist and no crash dump is created even though this is enabled in the Windows settings. The machine is dual screen and another machine with the same image has the same issue. The only clue is just before the crash, one of the monitors the system reports "Cannot display video mode 1280x1024" (approximate error, didn't write it down). Is there a way I can get Windows to produce log files of this crash session? Beyond running Tomcat as a service / minimised window, how can I fix (or even investigate)?

  Read the article

• Why is the size of windows off by 226x238 if defined via the Window Rules?

  - by Bobby

  I have installed Sawfish 1.8.2 from source on my new Ubuntu 12.04 installation following the Debian instructions, but I had this problem also with the stock 1.5.3. Whenever I define dimensions in the Window Rules for a window, the size is off by exactly 226x238 pixels, which means that 100x100 turns into 326x328. That's a very odd behavior, given that Sawfish is saving and loading the dimensions of the windows correctly (if saved via the window menu). Some additional system information: $ uname -a Linux Dagon 3.2.0-24-generic-pae #39-Ubuntu SMP Mon May 21 18:54:21 UTC 2012 i686 i686 i386 GNU/Linux $ sawfish --version sawfish version 1.8.2 nvidia proprietary driver, 9600GT Two monitors, 1920x1080 + 1440x900 in one session. Positionng the windows is working fine, only the dimensions are off by that odd number. Does somebody have an idea why?

  Read the article

• Mini DV and DVI Conversion

  - by Kairan

  Video card is: AMD HD 6950 My video card comes with 1xHDMI, 2xDVI, and 2xMini DV ports. I have always used VGA and DVI only. I have the HDMI already connected. I want to hook up 2 more display. One of the display can take a VGA only, the other is an LCD TV so it has VGA, HDMI, Component. I am wondering: 1) What is the best output port to use for the second two monitors? The miniDV or the DVI? 2) I need to run a long cable maybe 15-25 feet, this might change the answer to question 1, is an HDMI long cable 20+ ft going to be better than a 20ft DVI or miniDV ?

  Read the article

• How do I associate server traffic to a domain hosted on that server?

  - by morley

  I have three or four Linux servers, each of which hosts anywhere from 5 to 50 domains. Each domain has its own folder: /www/projectname/web/ Logs go in: /www/projectname/log However, if there's a traffic spike (or, as I see it on my end, a memory usage spike), I'm not sure how to figure out which domain is responsible for the traffic without running tail -f on each of the projects and making an educated guess based on how fast things scroll. There's got to be a better way! There probably is, but I haven't seen it. And the last time I checked, bandwidth monitors only report system-wide load. So if anyone knows how to do this the right way, please let me know. Thanks!

  Read the article

• Testing performance from around the world - how do I get a linux shell easily in multiple countries?

  - by Matthew O'Riordan

  We are building a socket based service where latency is paramount, and as such we have servers distributed into 7 data centres around the world. However, whilst we know we're bringing the servers closer to the clients, it's very difficult to know how effective this is, and importantly, what difference this makes compared to our competitors. As such, we want to run simple scripts that test latency and throughput for both our service and our competitors, which is easy enough using Amazon, however Amazon only have 7 data centres. We would like to know for example how we perform in locations all over the world such as South Africa, Australia, China, Peru etc. Does anyone know of any service where we could piggy back off their global infrastructure and run some scripts to test this performance? The obvious contenders are people like Monitis, but I don't think they would allow us to run custom scripts, only standard protocol monitors. Thanks for your help. Matt

  Read the article

• Headset for phone calls in the datacenter

  - by Cakemox

  Datacenters are noisy places. On occasion it is necessary for an administrator or technician to troubleshoot a problem in the datacenter while on a phone call or conference call. Unfortunately, these can be long, drawn out conversations, depending on the issue at hand. Mobile phones are pretty lousy in these circumstances: the person in the datacenter can't easily hear over the noise, and the mic tends to make things unpleasant for the listeners. In-ear monitors make it easier for the person in the datacenter to hear, but don't do a whole lot for the people listening on the other end. What headset options are there for making phone calls in the noise of the datacenter less noticeable for all involved?

  Read the article

• Recently reloaded computer, now have trailing effect when windows overlap

  - by Tony

  I recently did a clean install of my home machine and I am having a weird graphical error where if I move one window across the top of another it leaves a trail: I have the most recent NVIDIA drivers installed and nothing new is installed on my machine than before the reload (and I never had this issue before). I have two monitors and it happens on both so I'm sure it isn't a hardware issue (the card and my main monitor are also both less than 6 months old) I've also noticed a ripple when scrolling down on web pages which I believe is related. Any ideas what might be causing this and solutions to fix it?

  Read the article

• Do most front and rear USB connections deliver the same power and performance?

  - by Bratch

  I was reading this Three Monitors For Every User and there were some comments about rear USB ports being able to deliver more power than front USB ports because they are directly connected to the motherboard and closer to the power supply (by circuit board runs). Even though the front USB ports may have connectors farther from the power supply, and there are cables from the motherboard to the front ports, I think that the difference in power would be negligible (unless the case is over 5 meters long). Anyone know for sure if they are the same or different? Note that I'm not talking about an older case where the front might have been USB 1.1 and the rear USB 2.0. A modern case would have USB 2.0 on all ports. And of course using a powered hub would deliver plenty of power.

  Read the article

• Devices menu - project to second screen with only one monitor

  - by Jacob Palmer

  So I made a huge blunder. In the devices menu on Windows 8, I selected to project to a second screen only on accident. I had two monitors connected but only the primary one was actually displaying anything. So I projected it and now I can't access anything. The primary screen will show the windows icon when it loads, but then it disappears and I can't login or anything. Surely there's a way to get it back on the primary screen? Thanks a bunch. I'm really lost..

  Read the article

• Has anyone tried the "Secret LCD Monitor" hack? [closed]

  - by cornjuliox

  I'm genuinely curious to know, has anyone tried this hack? I can get LCD monitors for cheap at a place near where I live, and I'd like to try it myself, but I'd like to get more info on it before I do so to increase my chances of success. I'm looking for more info on the entire process, especially about any solvents I can use should I run into any glue problems. Questions for anyone that HAS tried it: Does it actually work, or is this some gag? If it works, is there any decrease in image quality or viewing angles? Since the polarization filters are essentially stuck to glasses, does that mean you're going to have to sit directly in front of the monitor at all times, and any shift in your position means that you won't be able to see the image? Does it improve/worsen ghosting or other LCD artifacts? Are there any problems with eye strain?

  Read the article

• How to find what is causing Windows 7 Desktop pause

  - by user1009073

  Windows 7 64 bit. Been in use approx 2 years since last rebuild. Recently, system is misbehaving. Specifically, on bootup, I get the login screen. I login, I get my desktop wallpapers (2 monitors). I get one widget (Rainlender2). It now pauses for approx 12 minutes. After that time, it continues fine, without errors/popups. It acts like the delay never happens. How do I identify the cause of the delay?

  Read the article

• Computer hangs on start-up, but re-start always works

  - by user10604

  I press the power switch; the fans start whirring; then precisely nothing happens. The monitor lights (I have two monitors) blink to indicate that they aren't receiving any signal - no BIOS splash screen, nothing. This scenario occurs about 80 percent of the time, the other 20 percent being normal starts. Noticing that the computer has not started properly, I press the power switch for four seconds to turn the computer off, and then I press it again to start the computer for the second time. It always starts normally the second time. Always. The power supply is a 750W from SilverStone. The motherboard is a Gigabyte P55A-UD3P. The video card is an Asus EN9800GT. There's 8 GB of RAM. I don't know what other information might be pertinent. Help!

  Read the article

• Lightweight window manager for Linux for Virtual Desktop / Multimon

  - by mattcodes

  Previous used Ubuntu Gnome with Compiz but for my basic spec intel macbook (4 years old) its a little too heavyweight. So for now Im back on my macbook with os x, but now considering going back to Linux. Im looking for a window manager that has the following properties: Supports virtual desktop (need 4 minimum) Works well with multi monitors - can move an app with shortcut from one monitor to the other (on same virtual desktop) Can remember window position (i.e. open vim on 2 monitor) - however must coerce everything back to first screen when 2nd screen is unplugged Keyboard shortcut friendly Not too hard to install Works well with minimum hardware such as integrated graphics Please suggest and share your experiences

  Read the article

• Best window manager for Linux for Virtual Desktop / Multimon

  - by mattcodes

  Previous used Ubuntu Gnome with Compiz but for my basic spec intel macbook (4 years old) its a little too heavyweight. So for now Im back on my macbook with os x, but now considering going back to Linux. Im looking for a window manager that has the following properties: 1) Supports virtual desktop (need 4 minimum) 2) Works well with multi monitors - can move an app with shortcut from one monitor to the other (on same virtual desktop) 3) Can remember window position (i.e. open vim on 2 monitor) - however must coerce everything back to first window when 2nd screen is unplugged 4) Keyboard shortcut friendly 5) Not too hard to install 6) Works well with minimum hardware such as integrated graphics Please suggest and share your experiences

  Read the article

• Photoshop changes colors when moved to a different monitor

  - by Jason

  This Yahoo! answers question pretty much sums up my predicament. Unfortunately I haven't really found an actual answer. Here's a screen shot of what happens when I place Photoshop between my monitors. Imagine that the left side of my laptop is the right square and the yellow is the right side of my monitor. When I move the program to one side fully or the other, it takes on the corresponding color. Obviously the color on the right is correct and Photoshop is changing the color of the image when it moves to my external monitor. Also notice how none of the tools or anything are different colors, just the actual image itself. How do I fix this? EDIT You may also notice that the color palette in the left corner is showing that yellow tinge. I didn't actually pick that yellow color, it's supposed to be showing the grey on the left that I used to fill in the square.

  Read the article

• How to make a video card use DVI output by default in text mode?

  - by Igor Zinov'yev

  I have an ASUS ENGT440/DI1GD5 video card which has three outputs: DVI, D-Sub and HDMI. I am using both D-Sub and DVI, but my main monitor is connected to the DVI output. Everything works fine except for the text mode. The card somehow uses the D-Sub output in text mode when both monitors are connected (when I disconnect the D-Sub output and leave only the primary monitor connected to the DVI output, it's being used correctly). How do I make the card use only the DVI output (or both) in text mode?

  Read the article

• Can a UPS give off an EM field capable of interfering with desktop components?

  - by Magsol

  I own an APC Back-UPS ES 750; it's about 4 years old, and is the only major component remaining in a question that has been boggling me for the last 18 months. (Yep, I originally posted this question about the possessed desktop, and while I marked a solution and closed the question, a week later the same problem returned) I've tried plugging the desktop straight into the wall (but left the other components plugged into the UPS) and the desktop still froze. Is it possible that the EM field generated by the UPS is interfering with my desktop components and causing these otherwise-unpredictable system freezes? To me this sounds like a long shot, but aside from my twin LCD monitors, that just about takes care of all the major components.

  Read the article

• What is the cleanest way to upgrade Fedora and also my individual installs while keeping /home?

  - by Don

  I am a professional programmer, using Fedora 10 (and a host of other packages individually installed). I use my system to telecommute. Every year or so, I go through the ritual dance, usually with a second computer and a KVM switch as I don't have office space for two monitors, to build the next version of Fedora and install all my favorite apps. Is there a better way? At least a nice way to keep track of what I need to 'add on' so that I don't have to manually install my app collection? Also, I keep /home on a separate raid-ed drive set so I can also fall prey to 'old-config-file-itis'.

  Read the article

• How to specify console (or primary display) for video adapter?

  - by Igor Zinov'yev

  I have an ASUS ENGT440/DI1GD5 video adapter which has three output ports: D-Sub (HD-15), DVI and HDMI. I am using both the D-Sub and DVI ports, but my main monitor is connected to the DVI output. Everything works fine except for which monitor is designated the console during boot. The video adapter seems to prefer the D-Sub output for the console. When both the VGA and DVI monitors are connected, then the VGA monitor always becomes the console which displays the motherboard logo, POST information and booting progress. When only the DVI monitor is connected, then it becomes the console as desired. How do I make the video adapter always use the DVI output (instead of the VGA port) for the console while booting?

  Read the article

• Configure PL2303-based USB-to-RS232 adapter to stay awake when no active device is present

  - by casualuser

  I am resurrecting some X10 devices with the aid of a USB-to-RS232 adapter. The problem is, that the adapter only works with the Firecracker device when there is another serial device on the line (the Firecracker is a pass-through device that monitors the RTS and DTR lines to do its magic). Is the PL2303 going to sleep without a real device on the line? Is there an option or command to keep it awake? Is there a cable configuration that would make it work without a real serial device present?

  Read the article

• Record the audio stream from HDMI monitor

  - by Nick

  I am trying to record sound playing on my comupter with Audacity but am running into some troubles. I have the stereo mix set to be the default audio recorder but it doesn't pick up the audio that is being played through my HDMI monitors speakers: Playback Recording When I plug in headphones the stereo mix will pick up the audio stream and I can record but not when playing through the HDMI. I have installed the latest audio drivers and have tried all the different record options to no avail. How can I capture the Audio stream going through the HDMI?

  Read the article

< Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >